Merge tag 'davinci-for-v5.1/soc-part2' of...

Merge tag 'davinci-for-v5.1/soc-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/fixes

DaVinci SoC updates for v5.1 (part 2)

This pull request contains changes needed to help get rid of
hard-coded GPIO base value passed from DaVinci platform data.

The OHCI related changes also help by moving over-current support
from board-files to OHCI driver making future DT-coversion easy.

The OHCI parts are acked by its maintainer.

* tag 'davinci-for-v5.1/soc-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  usb: ohci-da8xx: remove unused callbacks from platform data
  ARM: davinci: da830-evm: remove legacy usb helpers
  ARM: davinci: omapl138-hawk: remove legacy usb helpers
  usb: ohci-da8xx: add vbus and overcurrent gpios
  ARM: davinci: da830-evm: use gpio lookup entries for usb gpios
  ARM: davinci: omapl138-hawk: use gpio lookup entries for usb gpios
  usb: ohci-da8xx: add a helper pointer to &pdev->dev
  usb: ohci-da8xx: add a new line after local variables
  ARM: davinci: da850-evm: use GPIO hogs instead of the legacy API
  ARM: davinci: mityomapl138: use device properties for at24 eeprom
  ARM: davinci: mityomapl138: use nvmem notifiers
  ARM: davinci: remove dead code related to MAC address reading
  ARM: davinci: sffsdr: use device properties for at24 eeprom
  ARM: davinci: sffsdr: fix the at24 eeprom device name
  ARM: davinci: dm646x-evm: use device properties for at24 eeprom
  ARM: davinci: dm644x-evm: use device properties for at24 eeprom
  ARM: davinci: da830-evm: use device properties for at24 eeprom
  ARM: davinci: dm365-evm: use device properties for at24 eeprom
  ARM: davinci: mityomapl138: don't read the MAC address from machine code
  ARM: davinci: da850-evm: remove dead MTD code
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-davinci/board-da830-evm.c

@@ -18,7 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/spi/spi.h>
@@ -52,62 +52,19 @@ static const short da830_evm_usb11_pins[] = {
 	-1
 };
 
-static da8xx_ocic_handler_t da830_evm_usb_ocic_handler;
-
-static int da830_evm_usb_set_power(unsigned port, int on)
-{
-	gpio_set_value(ON_BD_USB_DRV, on);
-	return 0;
-}
-
-static int da830_evm_usb_get_power(unsigned port)
-{
-	return gpio_get_value(ON_BD_USB_DRV);
-}
-
-static int da830_evm_usb_get_oci(unsigned port)
-{
-	return !gpio_get_value(ON_BD_USB_OVC);
-}
-
-static irqreturn_t da830_evm_usb_ocic_irq(int, void *);
-
-static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
-{
-	int irq 	= gpio_to_irq(ON_BD_USB_OVC);
-	int error	= 0;
-
-	if (handler != NULL) {
-		da830_evm_usb_ocic_handler = handler;
-
-		error = request_irq(irq, da830_evm_usb_ocic_irq,
-				    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				    "OHCI over-current indicator", NULL);
-		if (error)
-			pr_err("%s: could not request IRQ to watch over-current indicator changes\n",
-			       __func__);
-	} else
-		free_irq(irq, NULL);
-
-	return error;
-}
+static struct gpiod_lookup_table da830_evm_usb_gpio_lookup = {
+	.dev_id		= "ohci-da8xx",
+	.table = {
+		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_DRV, "vbus", 0),
+		GPIO_LOOKUP("davinci_gpio", ON_BD_USB_OVC, "oc", 0),
+	},
+};
 
 static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
-	.set_power	= da830_evm_usb_set_power,
-	.get_power	= da830_evm_usb_get_power,
-	.get_oci	= da830_evm_usb_get_oci,
-	.ocic_notify	= da830_evm_usb_ocic_notify,
-
 	/* TPS2065 switch @ 5V */
 	.potpgt		= (3 + 1) / 2,	/* 3 ms max */
 };
 
-static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id)
-{
-	da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1);
-	return IRQ_HANDLED;
-}
-
 static __init void da830_evm_usb_init(void)
 {
 	int ret;
@@ -142,21 +99,7 @@ static __init void da830_evm_usb_init(void)
 		return;
 	}
 
-	ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV");
-	if (ret) {
-		pr_err("%s: failed to request GPIO for USB 1.1 port power control: %d\n",
-		       __func__, ret);
-		return;
-	}
-	gpio_direction_output(ON_BD_USB_DRV, 0);
-
-	ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC");
-	if (ret) {
-		pr_err("%s: failed to request GPIO for USB 1.1 port over-current indicator: %d\n",
-		       __func__, ret);
-		return;
-	}
-	gpio_direction_input(ON_BD_USB_OVC);
+	gpiod_add_lookup_table(&da830_evm_usb_gpio_lookup);
 
 	ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
 	if (ret)
@@ -457,12 +400,9 @@ static struct nvmem_cell_lookup da830_evm_nvmem_cell_lookup = {
 	.con_id		= "mac-address",
 };
 
-static struct at24_platform_data da830_evm_i2c_eeprom_info = {
-	.byte_len	= SZ_256K / 8,
-	.page_size	= 64,
-	.flags		= AT24_FLAG_ADDR16,
-	.setup		= davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry da830_evm_i2c_eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 
 static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
@@ -496,7 +436,7 @@ static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
 static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &da830_evm_i2c_eeprom_info,
+		.properties = da830_evm_i2c_eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),

arch/arm/mach-davinci/board-da850-evm.c

@@ -150,32 +150,6 @@ static struct spi_board_info da850evm_spi_info[] = {
 	},
 };
 
-#ifdef CONFIG_MTD
-static void da850_evm_m25p80_notify_add(struct mtd_info *mtd)
-{
-	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
-	size_t retlen;
-
-	if (!strcmp(mtd->name, "MAC-Address")) {
-		mtd_read(mtd, 0, ETH_ALEN, &retlen, mac_addr);
-		if (retlen == ETH_ALEN)
-			pr_info("Read MAC addr from SPI Flash: %pM\n",
-				mac_addr);
-	}
-}
-
-static struct mtd_notifier da850evm_spi_notifier = {
-	.add	= da850_evm_m25p80_notify_add,
-};
-
-static void da850_evm_setup_mac_addr(void)
-{
-	register_mtd_user(&da850evm_spi_notifier);
-}
-#else
-static void da850_evm_setup_mac_addr(void) { }
-#endif
-
 static struct mtd_partition da850_evm_norflash_partition[] = {
 	{
 		.name           = "bootloaders + env",
@@ -1064,6 +1038,17 @@ static const short da850_evm_rmii_pins[] = {
 	-1
 };
 
+static struct gpiod_hog da850_evm_emac_gpio_hogs[] = {
+	{
+		.chip_label	= "davinci_gpio",
+		.chip_hwnum	= DA850_MII_MDIO_CLKEN_PIN,
+		.line_name	= "mdio_clk_en",
+		.lflags		= 0,
+		/* dflags set in da850_evm_config_emac() */
+	},
+	{ }
+};
+
 static int __init da850_evm_config_emac(void)
 {
 	void __iomem *cfg_chip3_base;
@@ -1102,14 +1087,9 @@ static int __init da850_evm_config_emac(void)
 	if (ret)
 		pr_warn("%s:GPIO(2,6) mux setup failed\n", __func__);
 
-	ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
-	if (ret) {
-		pr_warn("Cannot open GPIO %d\n", DA850_MII_MDIO_CLKEN_PIN);
-		return ret;
-	}
-
-	/* Enable/Disable MII MDIO clock */
-	gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);
+	da850_evm_emac_gpio_hogs[0].dflags = rmii_en ? GPIOD_OUT_HIGH
+						     : GPIOD_OUT_LOW;
+	gpiod_add_hogs(da850_evm_emac_gpio_hogs);
 
 	soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID;
 
@@ -1494,8 +1474,6 @@ static __init void da850_evm_init(void)
 	if (ret)
 		pr_warn("%s: SATA registration failed: %d\n", __func__, ret);
 
-	da850_evm_setup_mac_addr();
-
 	ret = da8xx_register_rproc();
 	if (ret)
 		pr_warn("%s: dsp/rproc registration failed: %d\n",

arch/arm/mach-davinci/board-dm365-evm.c

@@ -18,7 +18,7 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/clk.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/leds.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -225,18 +225,15 @@ static struct nvmem_cell_lookup davinci_nvmem_cell_lookup = {
 	.con_id		= "mac-address",
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len       = (256*1024) / 8,
-	.page_size      = 64,
-	.flags          = AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 
 static struct i2c_board_info i2c_info[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &eeprom_info,
+		.properties = eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -16,8 +16,8 @@
 #include <linux/gpio/machine.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/pcf857x.h>
-#include <linux/platform_data/at24.h>
 #include <linux/platform_data/gpio-davinci.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
@@ -532,12 +532,9 @@ static struct nvmem_cell_lookup dm644evm_nvmem_cell_lookup = {
 	.con_id		= "mac-address",
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len	= (256*1024) / 8,
-	.page_size	= 64,
-	.flags		= AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 
 /*
@@ -647,7 +644,7 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 	},
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &eeprom_info,
+		.properties = eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("tlv320aic33", 0x1b),

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -22,7 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/platform_data/pcf857x.h>
 #include <linux/platform_data/ti-aemif.h>
 
@@ -364,12 +364,9 @@ static struct nvmem_cell_lookup dm646x_evm_nvmem_cell_lookup = {
 	.con_id		= "mac-address",
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len       = (256*1024) / 8,
-	.page_size      = 64,
-	.flags          = AT24_FLAG_ADDR16,
-	.setup          = davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 64),
+	{ }
 };
 #endif
 
@@ -440,7 +437,7 @@ static void evm_init_cpld(void)
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data  = &eeprom_info,
+		.properties  = eeprom_properties,
 	},
 	{
 		I2C_BOARD_INFO("pcf8574a", 0x38),

arch/arm/mach-davinci/board-mityomapl138.c

@@ -14,11 +14,13 @@
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/mtd/partitions.h>
+#include <linux/notifier.h>
+#include <linux/nvmem-consumer.h>
 #include <linux/nvmem-provider.h>
 #include <linux/regulator/machine.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
 #include <linux/etherdevice.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -117,11 +119,15 @@ static void mityomapl138_cpufreq_init(const char *partnum)
 static void mityomapl138_cpufreq_init(const char *partnum) { }
 #endif
 
-static void read_factory_config(struct nvmem_device *nvmem, void *context)
+static int read_factory_config(struct notifier_block *nb,
+			       unsigned long event, void *data)
 {
 	int ret;
 	const char *partnum = NULL;
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	struct nvmem_device *nvmem = data;
+
+	if (strcmp(nvmem_dev_name(nvmem), "1-00500") != 0)
+		return NOTIFY_DONE;
 
 	if (!IS_BUILTIN(CONFIG_NVMEM)) {
 		pr_warn("Factory Config not available without CONFIG_NVMEM\n");
@@ -147,21 +153,20 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context)
 		goto bad_config;
 	}
 
-	pr_info("Found MAC = %pM\n", factory_config.mac);
-	if (is_valid_ether_addr(factory_config.mac))
-		memcpy(soc_info->emac_pdata->mac_addr,
-			factory_config.mac, ETH_ALEN);
-	else
-		pr_warn("Invalid MAC found in factory config block\n");
-
 	partnum = factory_config.partnum;
 	pr_info("Part Number = %s\n", partnum);
 
 bad_config:
 	/* default maximum speed is valid for all platforms */
 	mityomapl138_cpufreq_init(partnum);
+
+	return NOTIFY_STOP;
 }
 
+static struct notifier_block mityomapl138_nvmem_notifier = {
+	.notifier_call = read_factory_config,
+};
+
 /*
  * We don't define a cell for factory config as it will be accessed from the
  * board file using the nvmem notifier chain.
@@ -187,12 +192,10 @@ static struct nvmem_cell_lookup mityomapl138_nvmem_cell_lookup = {
 	.con_id		= "mac-address",
 };
 
-static struct at24_platform_data mityomapl138_fd_chip = {
-	.byte_len	= 256,
-	.page_size	= 8,
-	.flags		= AT24_FLAG_READONLY | AT24_FLAG_IRUGO,
-	.setup		= read_factory_config,
-	.context	= NULL,
+static const struct property_entry mityomapl138_fd_chip_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 8),
+	PROPERTY_ENTRY_BOOL("read-only"),
+	{ }
 };
 
 static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
@@ -321,7 +324,7 @@ static struct i2c_board_info __initdata mityomap_tps65023_info[] = {
 	},
 	{
 		I2C_BOARD_INFO("24c02", 0x50),
-		.platform_data = &mityomapl138_fd_chip,
+		.properties = mityomapl138_fd_chip_properties,
 	},
 };
 
@@ -569,6 +572,7 @@ static void __init mityomapl138_init(void)
 
 	davinci_serial_init(da8xx_serial_device);
 
+	nvmem_register_notifier(&mityomapl138_nvmem_notifier);
 	nvmem_add_cell_table(&mityomapl138_nvmem_cell_table);
 	nvmem_add_cell_lookups(&mityomapl138_nvmem_cell_lookup, 1);
 

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -294,66 +294,24 @@ static int omapl138_hawk_register_aemif(void)
 	return platform_device_register(&omapl138_hawk_aemif_device);
 }
 
-static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id);
-static da8xx_ocic_handler_t hawk_usb_ocic_handler;
-
 static const short da850_hawk_usb11_pins[] = {
 	DA850_GPIO2_4, DA850_GPIO6_13,
 	-1
 };
 
-static int hawk_usb_set_power(unsigned port, int on)
-{
-	gpio_set_value(DA850_USB1_VBUS_PIN, on);
-	return 0;
-}
-
-static int hawk_usb_get_power(unsigned port)
-{
-	return gpio_get_value(DA850_USB1_VBUS_PIN);
-}
-
-static int hawk_usb_get_oci(unsigned port)
-{
-	return !gpio_get_value(DA850_USB1_OC_PIN);
-}
-
-static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler)
-{
-	int irq         = gpio_to_irq(DA850_USB1_OC_PIN);
-	int error       = 0;
-
-	if (handler != NULL) {
-		hawk_usb_ocic_handler = handler;
-
-		error = request_irq(irq, omapl138_hawk_usb_ocic_irq,
-					IRQF_TRIGGER_RISING |
-					IRQF_TRIGGER_FALLING,
-					"OHCI over-current indicator", NULL);
-		if (error)
-			pr_err("%s: could not request IRQ to watch "
-				"over-current indicator changes\n", __func__);
-	} else {
-		free_irq(irq, NULL);
-	}
-	return error;
-}
+static struct gpiod_lookup_table hawk_usb_gpio_lookup = {
+	.dev_id		= "ohci-da8xx",
+	.table = {
+		GPIO_LOOKUP("davinci_gpio", DA850_USB1_VBUS_PIN, "vbus", 0),
+		GPIO_LOOKUP("davinci_gpio", DA850_USB1_OC_PIN, "oc", 0),
+	},
+};
 
 static struct da8xx_ohci_root_hub omapl138_hawk_usb11_pdata = {
-	.set_power      = hawk_usb_set_power,
-	.get_power      = hawk_usb_get_power,
-	.get_oci        = hawk_usb_get_oci,
-	.ocic_notify    = hawk_usb_ocic_notify,
 	/* TPS2087 switch @ 5V */
 	.potpgt         = (3 + 1) / 2,  /* 3 ms max */
 };
 
-static irqreturn_t omapl138_hawk_usb_ocic_irq(int irq, void *dev_id)
-{
-	hawk_usb_ocic_handler(&omapl138_hawk_usb11_pdata, 1);
-	return IRQ_HANDLED;
-}
-
 static __init void omapl138_hawk_usb_init(void)
 {
 	int ret;
@@ -374,34 +332,13 @@ static __init void omapl138_hawk_usb_init(void)
 		pr_warn("%s: USB PHY registration failed: %d\n",
 			__func__, ret);
 
-	ret = gpio_request_one(DA850_USB1_VBUS_PIN,
-			GPIOF_DIR_OUT, "USB1 VBUS");
-	if (ret < 0) {
-		pr_err("%s: failed to request GPIO for USB 1.1 port "
-			"power control: %d\n", __func__, ret);
-		return;
-	}
-
-	ret = gpio_request_one(DA850_USB1_OC_PIN,
-			GPIOF_DIR_IN, "USB1 OC");
-	if (ret < 0) {
-		pr_err("%s: failed to request GPIO for USB 1.1 port "
-			"over-current indicator: %d\n", __func__, ret);
-		goto usb11_setup_oc_fail;
-	}
+	gpiod_add_lookup_table(&hawk_usb_gpio_lookup);
 
 	ret = da8xx_register_usb11(&omapl138_hawk_usb11_pdata);
-	if (ret) {
+	if (ret)
 		pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
-		goto usb11_setup_fail;
-	}
 
 	return;
-
-usb11_setup_fail:
-	gpio_free(DA850_USB1_OC_PIN);
-usb11_setup_oc_fail:
-	gpio_free(DA850_USB1_VBUS_PIN);
 }
 
 static __init void omapl138_hawk_init(void)

arch/arm/mach-davinci/board-sffsdr.c

@@ -26,7 +26,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
+#include <linux/property.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
@@ -92,16 +92,15 @@ static struct platform_device davinci_sffsdr_nandflash_device = {
 	.resource	= davinci_sffsdr_nandflash_resource,
 };
 
-static struct at24_platform_data eeprom_info = {
-	.byte_len	= (64*1024) / 8,
-	.page_size	= 32,
-	.flags		= AT24_FLAG_ADDR16,
+static const struct property_entry eeprom_properties[] = {
+	PROPERTY_ENTRY_U32("pagesize", 32),
+	{ }
 };
 
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
-		I2C_BOARD_INFO("24lc64", 0x50),
-		.platform_data	= &eeprom_info,
+		I2C_BOARD_INFO("24c64", 0x50),
+		.properties = eeprom_properties,
 	},
 	/* Other I2C devices:
 	 * MSP430,  addr 0x23 (not used)

arch/arm/mach-davinci/common.c

@@ -26,21 +26,6 @@ EXPORT_SYMBOL(davinci_soc_info);
 void __iomem *davinci_intc_base;
 int davinci_intc_type;
 
-void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context)
-{
-	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
-	off_t offset = (off_t)context;
-
-	if (!IS_BUILTIN(CONFIG_NVMEM)) {
-		pr_warn("Cannot read MAC addr from EEPROM without CONFIG_NVMEM\n");
-		return;
-	}
-
-	/* Read MAC addr from EEPROM */
-	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
-		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
-}
-
 static int __init davinci_init_id(struct davinci_soc_info *soc_info)
 {
 	int			i;

drivers/usb/host/ohci-da8xx.c

@@ -9,6 +9,7 @@
  */
 
 #include <linux/clk.h>
+#include <linux/gpio/consumer.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/jiffies.h>
@@ -40,6 +41,8 @@ struct da8xx_ohci_hcd {
 	struct regulator *vbus_reg;
 	struct notifier_block nb;
 	unsigned int reg_enabled;
+	struct gpio_desc *vbus_gpio;
+	struct gpio_desc *oc_gpio;
 };
 
 #define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
@@ -87,11 +90,12 @@ static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
 	struct device *dev = hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 	int ret;
 
-	if (hub && hub->set_power)
-		return hub->set_power(1, on);
+	if (da8xx_ohci->vbus_gpio) {
+		gpiod_set_value_cansleep(da8xx_ohci->vbus_gpio, on);
+		return 0;
+	}
 
 	if (!da8xx_ohci->vbus_reg)
 		return 0;
@@ -119,11 +123,9 @@ static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
 static int ohci_da8xx_get_power(struct usb_hcd *hcd)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
-	struct device *dev		= hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 
-	if (hub && hub->get_power)
-		return hub->get_power(1);
+	if (da8xx_ohci->vbus_gpio)
+		return gpiod_get_value_cansleep(da8xx_ohci->vbus_gpio);
 
 	if (da8xx_ohci->vbus_reg)
 		return regulator_is_enabled(da8xx_ohci->vbus_reg);
@@ -134,13 +136,11 @@ static int ohci_da8xx_get_power(struct usb_hcd *hcd)
 static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
-	struct device *dev		= hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 	unsigned int flags;
 	int ret;
 
-	if (hub && hub->get_oci)
-		return hub->get_oci(1);
+	if (da8xx_ohci->oc_gpio)
+		return gpiod_get_value_cansleep(da8xx_ohci->oc_gpio);
 
 	if (!da8xx_ohci->vbus_reg)
 		return 0;
@@ -158,10 +158,8 @@ static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
 static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
-	struct device *dev		= hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 
-	if (hub && hub->set_power)
+	if (da8xx_ohci->vbus_gpio)
 		return 1;
 
 	if (da8xx_ohci->vbus_reg)
@@ -173,10 +171,8 @@ static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
 static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
-	struct device *dev		= hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 
-	if (hub && hub->get_oci)
+	if (da8xx_ohci->oc_gpio)
 		return 1;
 
 	if (da8xx_ohci->vbus_reg)
@@ -196,19 +192,6 @@ static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd)
 	return 0;
 }
 
-/*
- * Handle the port over-current indicator change.
- */
-static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
-				    unsigned port)
-{
-	ocic_mask |= 1 << port;
-
-	/* Once over-current is detected, the port needs to be powered down */
-	if (hub->get_oci(port) > 0)
-		hub->set_power(port, 0);
-}
-
 static int ohci_da8xx_regulator_event(struct notifier_block *nb,
 				unsigned long event, void *data)
 {
@@ -223,16 +206,23 @@ static int ohci_da8xx_regulator_event(struct notifier_block *nb,
 	return 0;
 }
 
+static irqreturn_t ohci_da8xx_oc_handler(int irq, void *data)
+{
+	struct da8xx_ohci_hcd *da8xx_ohci = data;
+
+	if (gpiod_get_value(da8xx_ohci->oc_gpio))
+		gpiod_set_value(da8xx_ohci->vbus_gpio, 0);
+
+	return IRQ_HANDLED;
+}
+
 static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
 	struct device *dev		= hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
 	int ret = 0;
 
-	if (hub && hub->ocic_notify) {
-		ret = hub->ocic_notify(ohci_da8xx_ocic_handler);
-	} else if (da8xx_ohci->vbus_reg) {
+	if (!da8xx_ohci->oc_gpio && da8xx_ohci->vbus_reg) {
 		da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event;
 		ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg,
 						&da8xx_ohci->nb);
@@ -244,15 +234,6 @@ static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
 	return ret;
 }
 
-static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd)
-{
-	struct device *dev		= hcd->self.controller;
-	struct da8xx_ohci_root_hub *hub	= dev_get_platdata(dev);
-
-	if (hub && hub->ocic_notify)
-		hub->ocic_notify(NULL);
-}
-
 static int ohci_da8xx_reset(struct usb_hcd *hcd)
 {
 	struct device *dev		= hcd->self.controller;
@@ -402,34 +383,35 @@ MODULE_DEVICE_TABLE(of, da8xx_ohci_ids);
 static int ohci_da8xx_probe(struct platform_device *pdev)
 {
 	struct da8xx_ohci_hcd *da8xx_ohci;
+	struct device *dev = &pdev->dev;
+	int error, hcd_irq, oc_irq;
 	struct usb_hcd	*hcd;
 	struct resource *mem;
-	int error, irq;
-	hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev,
-				dev_name(&pdev->dev));
+
+	hcd = usb_create_hcd(&ohci_da8xx_hc_driver, dev, dev_name(dev));
 	if (!hcd)
 		return -ENOMEM;
 
 	da8xx_ohci = to_da8xx_ohci(hcd);
 	da8xx_ohci->hcd = hcd;
 
-	da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, NULL);
+	da8xx_ohci->usb11_clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(da8xx_ohci->usb11_clk)) {
 		error = PTR_ERR(da8xx_ohci->usb11_clk);
 		if (error != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Failed to get clock.\n");
+			dev_err(dev, "Failed to get clock.\n");
 		goto err;
 	}
 
-	da8xx_ohci->usb11_phy = devm_phy_get(&pdev->dev, "usb-phy");
+	da8xx_ohci->usb11_phy = devm_phy_get(dev, "usb-phy");
 	if (IS_ERR(da8xx_ohci->usb11_phy)) {
 		error = PTR_ERR(da8xx_ohci->usb11_phy);
 		if (error != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Failed to get phy.\n");
+			dev_err(dev, "Failed to get phy.\n");
 		goto err;
 	}
 
-	da8xx_ohci->vbus_reg = devm_regulator_get_optional(&pdev->dev, "vbus");
+	da8xx_ohci->vbus_reg = devm_regulator_get_optional(dev, "vbus");
 	if (IS_ERR(da8xx_ohci->vbus_reg)) {
 		error = PTR_ERR(da8xx_ohci->vbus_reg);
 		if (error == -ENODEV) {
@@ -437,13 +419,34 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
 		} else if (error == -EPROBE_DEFER) {
 			goto err;
 		} else {
-			dev_err(&pdev->dev, "Failed to get regulator\n");
+			dev_err(dev, "Failed to get regulator\n");
 			goto err;
 		}
 	}
 
+	da8xx_ohci->vbus_gpio = devm_gpiod_get_optional(dev, "vbus",
+							GPIOD_OUT_HIGH);
+	if (IS_ERR(da8xx_ohci->vbus_gpio))
+		goto err;
+
+	da8xx_ohci->oc_gpio = devm_gpiod_get_optional(dev, "oc", GPIOD_IN);
+	if (IS_ERR(da8xx_ohci->oc_gpio))
+		goto err;
+
+	if (da8xx_ohci->oc_gpio) {
+		oc_irq = gpiod_to_irq(da8xx_ohci->oc_gpio);
+		if (oc_irq < 0)
+			goto err;
+
+		error = devm_request_irq(dev, oc_irq, ohci_da8xx_oc_handler,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				"OHCI over-current indicator", da8xx_ohci);
+		if (error)
+			goto err;
+	}
+
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	hcd->regs = devm_ioremap_resource(&pdev->dev, mem);
+	hcd->regs = devm_ioremap_resource(dev, mem);
 	if (IS_ERR(hcd->regs)) {
 		error = PTR_ERR(hcd->regs);
 		goto err;
@@ -451,13 +454,13 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
 	hcd->rsrc_start = mem->start;
 	hcd->rsrc_len = resource_size(mem);
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
+	hcd_irq = platform_get_irq(pdev, 0);
+	if (hcd_irq < 0) {
 		error = -ENODEV;
 		goto err;
 	}
 
-	error = usb_add_hcd(hcd, irq, 0);
+	error = usb_add_hcd(hcd, hcd_irq, 0);
 	if (error)
 		goto err;
 
@@ -480,7 +483,6 @@ static int ohci_da8xx_remove(struct platform_device *pdev)
 {
 	struct usb_hcd	*hcd = platform_get_drvdata(pdev);
 
-	ohci_da8xx_unregister_notify(hcd);
 	usb_remove_hcd(hcd);
 	usb_put_hcd(hcd);
 

include/linux/davinci_emac.h

@@ -46,5 +46,4 @@ enum {
 	EMAC_VERSION_2,	/* DM646x */
 };
 
-void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context);
 #endif

include/linux/platform_data/usb-davinci.h

@@ -11,22 +11,8 @@
 #ifndef __ASM_ARCH_USB_H
 #define __ASM_ARCH_USB_H
 
-struct	da8xx_ohci_root_hub;
-
-typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
-				     unsigned port);
-
 /* Passed as the platform data to the OHCI driver */
 struct	da8xx_ohci_root_hub {
-	/* Switch the port power on/off */
-	int	(*set_power)(unsigned port, int on);
-	/* Read the port power status */
-	int	(*get_power)(unsigned port);
-	/* Read the port over-current indicator */
-	int	(*get_oci)(unsigned port);
-	/* Over-current indicator change notification (pass NULL to disable) */
-	int	(*ocic_notify)(da8xx_ocic_handler_t handler);
-
 	/* Time from power on to power good (in 2 ms units) */
 	u8	potpgt;
 };