USB: OHCI: make ohci-pxa27x a separate driver

Separate the  OHCI pxa27x/pxa3xx host controller driver from
ohci-hcd host code so that it can be built as a separate driver
module. This work is part of enabling multi-platform kernels on
ARM.
Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: Deepak Saxena <dsaxena@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/host/Kconfig

@@ -405,6 +405,14 @@ config USB_OHCI_HCD_EP93XX
 	  Enables support for the on-chip OHCI controller on
 	  EP93XX chips.
 
+config USB_OHCI_HCD_PXA27X
+	tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
+	depends on USB_OHCI_HCD && (PXA27x || PXA3xx)
+	default y
+	---help---
+	  Enables support for the on-chip OHCI controller on
+	  PXA27x/PXA3xx chips.
+
 config USB_OHCI_HCD_AT91
         tristate "Support for Atmel on-chip OHCI USB controller"
         depends on USB_OHCI_HCD && ARCH_AT91

drivers/usb/host/Makefile

@@ -55,6 +55,7 @@ obj-$(CONFIG_USB_OHCI_HCD_AT91)	+= ohci-at91.o
 obj-$(CONFIG_USB_OHCI_HCD_S3C2410)	+= ohci-s3c2410.o
 obj-$(CONFIG_USB_OHCI_HCD_LPC32XX)	+= ohci-nxp.o
 obj-$(CONFIG_USB_OHCI_HCD_EP93XX)	+= ohci-ep93xx.o
+obj-$(CONFIG_USB_OHCI_HCD_PXA27X)	+= ohci-pxa27x.o
 
 obj-$(CONFIG_USB_UHCI_HCD)	+= uhci-hcd.o
 obj-$(CONFIG_USB_FHCI_HCD)	+= fhci.o

drivers/usb/host/ohci-hcd.c

@@ -1177,11 +1177,6 @@ MODULE_LICENSE ("GPL");
 #define SA1111_DRIVER		ohci_hcd_sa1111_driver
 #endif
 
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-#include "ohci-pxa27x.c"
-#define PLATFORM_DRIVER		ohci_hcd_pxa27x_driver
-#endif
-
 #ifdef CONFIG_ARCH_DAVINCI_DA8XX
 #include "ohci-da8xx.c"
 #define DAVINCI_PLATFORM_DRIVER	ohci_hcd_da8xx_driver