arm64: dts: mediatek: Move MT6358 PMIC interrupts to MT8183 boards

MT6358 is a PMIC that is typically used on MT8183 boards, and it has
its own dtsi file, declaring interrupts-extended on its node.

The interrupt pin of that PMIC is connected to a SoC GPIO and that
is therefore not only SoC-specific, but board-specific: this means
that the interrupt-extended property does not belong to the PMIC
dtsi file, but to board files using that PMIC.

For correctness, transfer the interrupts-extended property from the
PMIC-specific mt6358.dtsi to board files.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arch/arm64/boot/dts/mediatek/mt6358.dtsi

@@ -8,7 +8,6 @@ &pwrap {
 	pmic: pmic {
 		compatible = "mediatek,mt6358";
 		interrupt-controller;
-		interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 
 		mt6358codec: mt6358codec {

arch/arm64/boot/dts/mediatek/mt8183-evb.dts

@@ -381,6 +381,10 @@ pins_pwm {
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &mfg {
 	domain-supply = <&mt6358_vgpu_reg>;
 };

arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi

@@ -846,6 +846,10 @@ pins_wifi_wakeup {
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &pwm0 {
 	status = "okay";
 	pinctrl-names = "default";

arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts

@@ -370,6 +370,10 @@ pins_clk {
 	};
 };
 
+&pmic {
+	interrupts-extended = <&pio 182 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &mfg {
 	domain-supply = <&mt6358_vgpu_reg>;
 };