Skip to content

L
linux
Commit b98d13c7 authored by G.Shark Jeong's avatar G.Shark Jeong Committed by Bryan Wu
1 Browse files
Options

leds: Add new LED driver for lm355x chips 

This driver is a general version for LM355x,lm3554 and lm3556,led chips of TI.

LM3554 :
The LM3554 is a 2 MHz fixed-frequency synchronous boost
converter with 1.2A dual high side led drivers.
Datasheet: www.ti.com/lit/ds/symlink/lm3554.pdf

LM3556 :
The LM3556 is a 4 MHz fixed-frequency synchronous boost
converter plus 1.5A constant current driver for a high-current white LED.
Datasheet: www.national.com/ds/LM/LM3556.pdf

(bryan.wu@canonical.com: use flush_work() to replace flush_work_sync() which is
deprecated)
Signed-off-by: default avatarG.Shark Jeong <gshark.jeong@gmail.com>
Signed-off-by: default avatarBryan Wu <bryan.wu@canonical.com>
parent 56a1e9ad
Hide whitespace changes
Inline Side-by-side
Showing with 643 additions and 55 deletions
drivers/leds/Kconfig
View file @ b98d13c7
......@@ -423,13 +423,13 @@ config LEDS_MAX8997
This option enables support for on-chip LED drivers on
MAXIM MAX8997 PMIC.
config LEDS_LM3556
tristate "LED support for LM3556 Chip"
config LEDS_LM355x
tristate "LED support for LM355x Chips, LM3554 and LM3556"
depends on LEDS_CLASS && I2C
select REGMAP_I2C
help
This option enables support for LEDs connected to LM3556.
LM3556 includes Torch, Flash and Indicator functions.
This option enables support for LEDs connected to LM355x.
LM355x includes Torch, Flash and Indicator functions.
config LEDS_OT200
tristate "LED support for the Bachmann OT200"
......
drivers/leds/Makefile
View file @ b98d13c7
......@@ -48,7 +48,7 @@ obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
obj-$(CONFIG_LEDS_RENESAS_TPU) += leds-renesas-tpu.o
obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
obj-$(CONFIG_LEDS_LM3556) += leds-lm3556.o
obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o
obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
# LED SPI Drivers
......
drivers/leds/leds-lm3556.c → drivers/leds/leds-lm355x.c
View file @ b98d13c7
/*
* Simple driver for Texas Instruments LM3556 LED Flash driver chip (Rev0x03)
* Copyright (C) 2012 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Please refer Documentation/leds/leds-lm3556.txt file.
*/
* Simple driver for Texas Instruments LM355x LED Flash driver chip
* Copyright (C) 2012 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/fs.h>
#include <linux/regmap.h>
#include <linux/platform_data/leds-lm3556.h>
#define REG_FILT_TIME (0x0)
#define REG_IVFM_MODE (0x1)
#define REG_NTC (0x2)
#define REG_INDIC_TIME (0x3)
#define REG_INDIC_BLINK (0x4)
#define REG_INDIC_PERIOD (0x5)
#define REG_TORCH_TIME (0x6)
#define REG_CONF (0x7)
#define REG_FLASH (0x8)
#define REG_I_CTRL (0x9)
#define REG_ENABLE (0xA)
#define REG_FLAG (0xB)
#define REG_MAX (0xB)
#define IVFM_FILTER_TIME_SHIFT (3)
#define UVLO_EN_SHIFT (7)
#define HYSTERSIS_SHIFT (5)
#define IVM_D_TH_SHIFT (2)
#define IVFM_ADJ_MODE_SHIFT (0)
#define NTC_EVENT_LVL_SHIFT (5)
#define NTC_TRIP_TH_SHIFT (2)
#define NTC_BIAS_I_LVL_SHIFT (0)
#define INDIC_RAMP_UP_TIME_SHIFT (3)
#define INDIC_RAMP_DN_TIME_SHIFT (0)
#define INDIC_N_BLANK_SHIFT (4)
#define INDIC_PULSE_TIME_SHIFT (0)
#define INDIC_N_PERIOD_SHIFT (0)
#define TORCH_RAMP_UP_TIME_SHIFT (3)
#define TORCH_RAMP_DN_TIME_SHIFT (0)
#define STROBE_USUAGE_SHIFT (7)
#define STROBE_PIN_POLARITY_SHIFT (6)
#define TORCH_PIN_POLARITY_SHIFT (5)
#define TX_PIN_POLARITY_SHIFT (4)
#define TX_EVENT_LVL_SHIFT (3)
#define IVFM_EN_SHIFT (2)
#define NTC_MODE_SHIFT (1)
#define INDIC_MODE_SHIFT (0)
#define INDUCTOR_I_LIMIT_SHIFT (6)
#define FLASH_RAMP_TIME_SHIFT (3)
#define FLASH_TOUT_TIME_SHIFT (0)
#define TORCH_I_SHIFT (4)
#define FLASH_I_SHIFT (0)
#define NTC_EN_SHIFT (7)
#define TX_PIN_EN_SHIFT (6)
#define STROBE_PIN_EN_SHIFT (5)
#define TORCH_PIN_EN_SHIFT (4)
#define PRECHG_MODE_EN_SHIFT (3)
#define PASS_MODE_ONLY_EN_SHIFT (2)
#define MODE_BITS_SHIFT (0)
#define IVFM_FILTER_TIME_MASK (0x3)
#define UVLO_EN_MASK (0x1)
#define HYSTERSIS_MASK (0x3)
#define IVM_D_TH_MASK (0x7)
#define IVFM_ADJ_MODE_MASK (0x3)
#define NTC_EVENT_LVL_MASK (0x1)
#define NTC_TRIP_TH_MASK (0x7)
#define NTC_BIAS_I_LVL_MASK (0x3)
#define INDIC_RAMP_UP_TIME_MASK (0x7)
#define INDIC_RAMP_DN_TIME_MASK (0x7)
#define INDIC_N_BLANK_MASK (0x7)
#define INDIC_PULSE_TIME_MASK (0x7)
#define INDIC_N_PERIOD_MASK (0x7)
#define TORCH_RAMP_UP_TIME_MASK (0x7)
#define TORCH_RAMP_DN_TIME_MASK (0x7)
#define STROBE_USUAGE_MASK (0x1)
#define STROBE_PIN_POLARITY_MASK (0x1)
#define TORCH_PIN_POLARITY_MASK (0x1)
#define TX_PIN_POLARITY_MASK (0x1)
#define TX_EVENT_LVL_MASK (0x1)
#define IVFM_EN_MASK (0x1)
#define NTC_MODE_MASK (0x1)
#define INDIC_MODE_MASK (0x1)
#define INDUCTOR_I_LIMIT_MASK (0x3)
#define FLASH_RAMP_TIME_MASK (0x7)
#define FLASH_TOUT_TIME_MASK (0x7)
#define TORCH_I_MASK (0x7)
#define FLASH_I_MASK (0xF)
#define NTC_EN_MASK (0x1)
#define TX_PIN_EN_MASK (0x1)
#define STROBE_PIN_EN_MASK (0x1)
#define TORCH_PIN_EN_MASK (0x1)
#define PRECHG_MODE_EN_MASK (0x1)
#define PASS_MODE_ONLY_EN_MASK (0x1)
#define MODE_BITS_MASK (0x13)
#define EX_PIN_CONTROL_MASK (0xF1)
#define EX_PIN_ENABLE_MASK (0x70)
#include <linux/workqueue.h>
#include <linux/platform_data/leds-lm355x.h>
enum lm355x_type {
CHIP_LM3554 = 0,
CHIP_LM3556,
};
enum lm355x_regs {
REG_FLAG = 0,
REG_TORCH_CFG,
REG_TORCH_CTRL,
REG_STROBE_CFG,
REG_FLASH_CTRL,
REG_INDI_CFG,
REG_INDI_CTRL,
REG_OPMODE,
REG_MAX,
};
/* operation mode */
enum lm355x_mode {
MODE_SHDN = 0,
MODE_INDIC,
MODE_TORCH,
MODE_FLASH
};
/* register map info. */
struct lm355x_reg_data {
u8 regno;
u8 mask;
u8 shift;
};
struct lm355x_chip_data {
struct device *dev;
enum lm355x_type type;
struct led_classdev cdev_flash;
struct led_classdev cdev_torch;
struct led_classdev cdev_indicator;
struct work_struct work_flash;
struct work_struct work_torch;
struct work_struct work_indicator;
u8 br_flash;
u8 br_torch;
u8 br_indicator;
struct lm355x_platform_data *pdata;
struct regmap *regmap;
struct mutex lock;
unsigned int last_flag;
struct lm355x_reg_data *regs;
};
/* specific indicator function for lm3556 */
enum lm3556_indic_pulse_time {
PULSE_TIME_0_MS = 0,
PULSE_TIME_32_MS,
......@@ -155,13 +125,6 @@ enum lm3556_indic_period {
INDIC_PERIOD_7,
};
enum lm3556_mode {
MODES_STASNDBY = 0,
MODES_INDIC,
MODES_TORCH,
MODES_FLASH
};
#define INDIC_PATTERN_SIZE 4
struct indicator {
......@@ -169,190 +132,261 @@ struct indicator {
u8 period_cnt;
};
struct lm3556_chip_data {
struct device *dev;
struct led_classdev cdev_flash;
struct led_classdev cdev_torch;
struct led_classdev cdev_indicator;
/* indicator pattern data only for lm3556 */
static struct indicator indicator_pattern[INDIC_PATTERN_SIZE] = {
[0] = {(INDIC_N_BLANK_1 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_1},
[1] = {(INDIC_N_BLANK_15 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_2},
[2] = {(INDIC_N_BLANK_10 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_4},
[3] = {(INDIC_N_BLANK_5 << 4) | PULSE_TIME_32_MS, INDIC_PERIOD_7},
};
struct lm3556_platform_data *pdata;
struct regmap *regmap;
struct mutex lock;
static struct lm355x_reg_data lm3554_regs[REG_MAX] = {
[REG_FLAG] = {0xD0, 0xBF, 0},
[REG_TORCH_CFG] = {0xE0, 0x80, 7},
[REG_TORCH_CTRL] = {0xA0, 0x38, 3},
[REG_STROBE_CFG] = {0xE0, 0x04, 2},
[REG_FLASH_CTRL] = {0xB0, 0x78, 3},
[REG_INDI_CFG] = {0xE0, 0x08, 3},
[REG_INDI_CTRL] = {0xA0, 0xC0, 6},
[REG_OPMODE] = {0xA0, 0x03, 0},
};
unsigned int last_flag;
static struct lm355x_reg_data lm3556_regs[REG_MAX] = {
[REG_FLAG] = {0x0B, 0xFF, 0},
[REG_TORCH_CFG] = {0x0A, 0x10, 4},
[REG_TORCH_CTRL] = {0x09, 0x70, 4},
[REG_STROBE_CFG] = {0x0A, 0x20, 5},
[REG_FLASH_CTRL] = {0x09, 0x0F, 0},
[REG_INDI_CFG] = {0xFF, 0xFF, 0},
[REG_INDI_CTRL] = {0x09, 0x70, 4},
[REG_OPMODE] = {0x0A, 0x03, 0},
};
/* indicator pattern */
static struct indicator indicator_pattern[INDIC_PATTERN_SIZE] = {
[0] = {(INDIC_N_BLANK_1 << INDIC_N_BLANK_SHIFT)
| PULSE_TIME_32_MS, INDIC_PERIOD_1},
[1] = {(INDIC_N_BLANK_15 << INDIC_N_BLANK_SHIFT)
| PULSE_TIME_32_MS, INDIC_PERIOD_2},
[2] = {(INDIC_N_BLANK_10 << INDIC_N_BLANK_SHIFT)
| PULSE_TIME_32_MS, INDIC_PERIOD_4},
[3] = {(INDIC_N_BLANK_5 << INDIC_N_BLANK_SHIFT)
| PULSE_TIME_32_MS, INDIC_PERIOD_7},
static char lm355x_name[][I2C_NAME_SIZE] = {
[CHIP_LM3554] = LM3554_NAME,
[CHIP_LM3556] = LM3556_NAME,
};
/* chip initialize */
static int __devinit lm3556_chip_init(struct lm3556_chip_data *chip)
static int __devinit lm355x_chip_init(struct lm355x_chip_data *chip)
{
unsigned int reg_val;
int ret;
struct lm3556_platform_data *pdata = chip->pdata;
/* set config register */
ret = regmap_read(chip->regmap, REG_CONF, &reg_val);
if (ret < 0) {
dev_err(chip->dev, "Failed to read REG_CONF Register\n");
goto out;
}
reg_val &= (~EX_PIN_CONTROL_MASK);
reg_val |= ((pdata->torch_pin_polarity & 0x01)
<< TORCH_PIN_POLARITY_SHIFT);
reg_val |= ((pdata->strobe_usuage & 0x01) << STROBE_USUAGE_SHIFT);
reg_val |= ((pdata->strobe_pin_polarity & 0x01)
<< STROBE_PIN_POLARITY_SHIFT);
reg_val |= ((pdata->tx_pin_polarity & 0x01) << TX_PIN_POLARITY_SHIFT);
reg_val |= ((pdata->indicator_mode & 0x01) << INDIC_MODE_SHIFT);
ret = regmap_write(chip->regmap, REG_CONF, reg_val);
if (ret < 0) {
dev_err(chip->dev, "Failed to write REG_CONF Regisgter\n");
goto out;
}
/* set enable register */
ret = regmap_read(chip->regmap, REG_ENABLE, &reg_val);
if (ret < 0) {
dev_err(chip->dev, "Failed to read REG_ENABLE Register\n");
goto out;
}
reg_val &= (~EX_PIN_ENABLE_MASK);
reg_val |= ((pdata->torch_pin_en & 0x01) << TORCH_PIN_EN_SHIFT);
reg_val |= ((pdata->strobe_pin_en & 0x01) << STROBE_PIN_EN_SHIFT);
reg_val |= ((pdata->tx_pin_en & 0x01) << TX_PIN_EN_SHIFT);
unsigned int reg_val;
struct lm355x_platform_data *pdata = chip->pdata;
/* input and output pins configuration */
switch (chip->type) {
case CHIP_LM3554:
reg_val = pdata->pin_tx2 | pdata->ntc_pin;
ret = regmap_update_bits(chip->regmap, 0xE0, 0x28, reg_val);
if (ret < 0)
goto out;
reg_val = pdata->pass_mode;
ret = regmap_update_bits(chip->regmap, 0xA0, 0x04, reg_val);
if (ret < 0)
goto out;
break;
ret = regmap_write(chip->regmap, REG_ENABLE, reg_val);
if (ret < 0) {
dev_err(chip->dev, "Failed to write REG_ENABLE Regisgter\n");
goto out;
case CHIP_LM3556:
reg_val = pdata->pin_tx2 | pdata->ntc_pin | pdata->pass_mode;
ret = regmap_update_bits(chip->regmap, 0x0A, 0xC4, reg_val);
if (ret < 0)
goto out;
break;
default:
return -ENODATA;
}
return ret;
out:
dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
return ret;
}
/* chip control */
static int lm3556_control(struct lm3556_chip_data *chip,
u8 brightness, enum lm3556_mode opmode)
static void lm355x_control(struct lm355x_chip_data *chip,
u8 brightness, enum lm355x_mode opmode)
{
int ret;
struct lm3556_platform_data *pdata = chip->pdata;
unsigned int reg_val;
struct lm355x_platform_data *pdata = chip->pdata;
struct lm355x_reg_data *preg = chip->regs;
ret = regmap_read(chip->regmap, REG_FLAG, &chip->last_flag);
if (ret < 0) {
dev_err(chip->dev, "Failed to read REG_FLAG Register\n");
ret = regmap_read(chip->regmap, preg[REG_FLAG].regno, &chip->last_flag);
if (ret < 0)
goto out;
}
if (chip->last_flag)
dev_info(chip->dev, "Last FLAG is 0x%x\n", chip->last_flag);
/* brightness 0 means off-state */
if (chip->last_flag & preg[REG_FLAG].mask)
dev_info(chip->dev, "%s Last FLAG is 0x%x\n",
lm355x_name[chip->type],
chip->last_flag & preg[REG_FLAG].mask);
/* brightness 0 means shutdown */
if (!brightness)
opmode = MODES_STASNDBY;
opmode = MODE_SHDN;
switch (opmode) {
case MODES_TORCH:
ret = regmap_update_bits(chip->regmap, REG_I_CTRL,
TORCH_I_MASK << TORCH_I_SHIFT,
(brightness - 1) << TORCH_I_SHIFT);
if (pdata->torch_pin_en)
opmode |= (TORCH_PIN_EN_MASK << TORCH_PIN_EN_SHIFT);
case MODE_TORCH:
ret =
regmap_update_bits(chip->regmap, preg[REG_TORCH_CTRL].regno,
preg[REG_TORCH_CTRL].mask,
(brightness - 1)
<< preg[REG_TORCH_CTRL].shift);
if (ret < 0)
goto out;
if (pdata->pin_tx1 != LM355x_PIN_TORCH_DISABLE) {
ret =
regmap_update_bits(chip->regmap,
preg[REG_TORCH_CFG].regno,
preg[REG_TORCH_CFG].mask,
0x01 <<
preg[REG_TORCH_CFG].shift);
if (ret < 0)
goto out;
opmode = MODE_SHDN;
dev_info(chip->dev,
"torch brt is set - ext. torch pin mode\n");
}
break;
case MODES_FLASH:
ret = regmap_update_bits(chip->regmap, REG_I_CTRL,
FLASH_I_MASK << FLASH_I_SHIFT,
(brightness - 1) << FLASH_I_SHIFT);
case MODE_FLASH:
ret =
regmap_update_bits(chip->regmap, preg[REG_FLASH_CTRL].regno,
preg[REG_FLASH_CTRL].mask,
(brightness - 1)
<< preg[REG_FLASH_CTRL].shift);
if (ret < 0)
goto out;
if (pdata->pin_strobe != LM355x_PIN_STROBE_DISABLE) {
if (chip->type == CHIP_LM3554)
reg_val = 0x00;
else
reg_val = 0x01;
ret =
regmap_update_bits(chip->regmap,
preg[REG_STROBE_CFG].regno,
preg[REG_STROBE_CFG].mask,
reg_val <<
preg[REG_STROBE_CFG].shift);
if (ret < 0)
goto out;
opmode = MODE_SHDN;
dev_info(chip->dev,
"flash brt is set - ext. strobe pin mode\n");
}
break;
case MODES_INDIC:
ret = regmap_update_bits(chip->regmap, REG_I_CTRL,
TORCH_I_MASK << TORCH_I_SHIFT,
(brightness - 1) << TORCH_I_SHIFT);
case MODE_INDIC:
ret =
regmap_update_bits(chip->regmap, preg[REG_INDI_CTRL].regno,
preg[REG_INDI_CTRL].mask,
(brightness - 1)
<< preg[REG_INDI_CTRL].shift);
if (ret < 0)
goto out;
if (pdata->pin_tx2 != LM355x_PIN_TX_DISABLE) {
ret =
regmap_update_bits(chip->regmap,
preg[REG_INDI_CFG].regno,
preg[REG_INDI_CFG].mask,
0x01 <<
preg[REG_INDI_CFG].shift);
if (ret < 0)
goto out;
opmode = MODE_SHDN;
}
break;
case MODES_STASNDBY:
if (pdata->torch_pin_en)
opmode |= (TORCH_PIN_EN_MASK << TORCH_PIN_EN_SHIFT);
case MODE_SHDN:
break;
default:
return ret;
return;
}
if (ret < 0) {
dev_err(chip->dev, "Failed to write REG_I_CTRL Register\n");
/* operation mode control */
ret = regmap_update_bits(chip->regmap, preg[REG_OPMODE].regno,
preg[REG_OPMODE].mask,
opmode << preg[REG_OPMODE].shift);
if (ret < 0)
goto out;
}
ret = regmap_update_bits(chip->regmap, REG_ENABLE,
MODE_BITS_MASK << MODE_BITS_SHIFT,
opmode << MODE_BITS_SHIFT);
return;
out:
return ret;
dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
return;
}
/* torch */
static void lm3556_torch_brightness_set(struct led_classdev *cdev,
enum led_brightness brightness)
static void lm355x_deferred_torch_brightness_set(struct work_struct *work)
{
struct lm3556_chip_data *chip =
container_of(cdev, struct lm3556_chip_data, cdev_torch);
struct lm355x_chip_data *chip =
container_of(work, struct lm355x_chip_data, work_torch);
mutex_lock(&chip->lock);
lm3556_control(chip, brightness, MODES_TORCH);
lm355x_control(chip, chip->br_torch, MODE_TORCH);
mutex_unlock(&chip->lock);
}
static void lm355x_torch_brightness_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
struct lm355x_chip_data *chip =
container_of(cdev, struct lm355x_chip_data, cdev_torch);
chip->br_torch = brightness;
schedule_work(&chip->work_torch);
}
/* flash */
static void lm3556_strobe_brightness_set(struct led_classdev *cdev,
enum led_brightness brightness)
static void lm355x_deferred_strobe_brightness_set(struct work_struct *work)
{
struct lm3556_chip_data *chip =
container_of(cdev, struct lm3556_chip_data, cdev_flash);
struct lm355x_chip_data *chip =
container_of(work, struct lm355x_chip_data, work_flash);
mutex_lock(&chip->lock);
lm3556_control(chip, brightness, MODES_FLASH);
lm355x_control(chip, chip->br_flash, MODE_FLASH);
mutex_unlock(&chip->lock);
}
static void lm355x_strobe_brightness_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
struct lm355x_chip_data *chip =
container_of(cdev, struct lm355x_chip_data, cdev_flash);
chip->br_flash = brightness;
schedule_work(&chip->work_flash);
}
/* indicator */
static void lm3556_indicator_brightness_set(struct led_classdev *cdev,
enum led_brightness brightness)
static void lm355x_deferred_indicator_brightness_set(struct work_struct *work)
{
struct lm3556_chip_data *chip =
container_of(cdev, struct lm3556_chip_data, cdev_indicator);
struct lm355x_chip_data *chip =
container_of(work, struct lm355x_chip_data, work_indicator);
mutex_lock(&chip->lock);
lm3556_control(chip, brightness, MODES_INDIC);
lm355x_control(chip, chip->br_indicator, MODE_INDIC);
mutex_unlock(&chip->lock);
}
/* indicator pattern */
static void lm355x_indicator_brightness_set(struct led_classdev *cdev,
enum led_brightness brightness)
{
struct lm355x_chip_data *chip =
container_of(cdev, struct lm355x_chip_data, cdev_indicator);
chip->br_indicator = brightness;
schedule_work(&chip->work_indicator);
}
/* indicator pattern only for lm3556*/
static ssize_t lm3556_indicator_pattern_store(struct device *dev,
struct device_attribute *devAttr,
const char *buf, size_t size)
{
ssize_t ret;
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct lm3556_chip_data *chip =
container_of(led_cdev, struct lm3556_chip_data, cdev_indicator);
struct lm355x_chip_data *chip =
container_of(led_cdev, struct lm355x_chip_data, cdev_indicator);
unsigned int state;
ret = kstrtouint(buf, 10, &state);
......@@ -361,40 +395,36 @@ static ssize_t lm3556_indicator_pattern_store(struct device *dev,
if (state > INDIC_PATTERN_SIZE - 1)
state = INDIC_PATTERN_SIZE - 1;
ret = regmap_write(chip->regmap, REG_INDIC_BLINK,
ret = regmap_write(chip->regmap, 0x04,
indicator_pattern[state].blinking);
if (ret < 0) {
dev_err(chip->dev, "Failed to write REG_ENABLE Regisgter\n");
if (ret < 0)
goto out;
}
ret = regmap_write(chip->regmap, REG_INDIC_PERIOD,
ret = regmap_write(chip->regmap, 0x05,
indicator_pattern[state].period_cnt);
if (ret < 0) {
dev_err(chip->dev, "Failed to write REG_ENABLE Regisgter\n");
if (ret < 0)
goto out;
}
return size;
out:
dev_err(chip->dev, "Indicator pattern doesn't saved\n");
dev_err(chip->dev, "%s:i2c access fail to register\n", __func__);
return size;
}
static DEVICE_ATTR(pattern, 0666, NULL, lm3556_indicator_pattern_store);
static const struct regmap_config lm3556_regmap = {
static const struct regmap_config lm355x_regmap = {
.reg_bits = 8,
.val_bits = 8,
.max_register = REG_MAX,
.max_register = 0xFF,
};
/* module initialize */
static int __devinit lm3556_probe(struct i2c_client *client,
static int __devinit lm355x_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lm3556_platform_data *pdata = client->dev.platform_data;
struct lm3556_chip_data *chip;
struct lm355x_platform_data *pdata = client->dev.platform_data;
struct lm355x_chip_data *chip;
int err;
......@@ -404,64 +434,86 @@ static int __devinit lm3556_probe(struct i2c_client *client,
}
if (pdata == NULL) {
dev_err(&client->dev, "Needs Platform Data.\n");
dev_err(&client->dev, "needs Platform Data.\n");
return -ENODATA;
}
chip =
devm_kzalloc(&client->dev, sizeof(struct lm3556_chip_data),
GFP_KERNEL);
chip = devm_kzalloc(&client->dev,
sizeof(struct lm355x_chip_data), GFP_KERNEL);
if (!chip)
return -ENOMEM;
chip->dev = &client->dev;
chip->type = id->driver_data;
switch (id->driver_data) {
case CHIP_LM3554:
chip->regs = lm3554_regs;
break;
case CHIP_LM3556:
chip->regs = lm3556_regs;
break;
default:
return -ENOSYS;
}
chip->pdata = pdata;
chip->regmap = devm_regmap_init_i2c(client, &lm3556_regmap);
chip->regmap = devm_regmap_init_i2c(client, &lm355x_regmap);
if (IS_ERR(chip->regmap)) {
err = PTR_ERR(chip->regmap);
dev_err(&client->dev, "Failed to allocate register map: %d\n",
err);
dev_err(&client->dev,
"Failed to allocate register map: %d\n", err);
return err;
}
mutex_init(&chip->lock);
i2c_set_clientdata(client, chip);
err = lm3556_chip_init(chip);
err = lm355x_chip_init(chip);
if (err < 0)
goto err_out;
/* flash */
INIT_WORK(&chip->work_flash, lm355x_deferred_strobe_brightness_set);
chip->cdev_flash.name = "flash";
chip->cdev_flash.max_brightness = 16;
chip->cdev_flash.brightness_set = lm3556_strobe_brightness_set;
chip->cdev_flash.brightness_set = lm355x_strobe_brightness_set;
err = led_classdev_register((struct device *)
&client->dev, &chip->cdev_flash);
if (err < 0)
goto err_out;
/* torch */
INIT_WORK(&chip->work_torch, lm355x_deferred_torch_brightness_set);
chip->cdev_torch.name = "torch";
chip->cdev_torch.max_brightness = 8;
chip->cdev_torch.brightness_set = lm3556_torch_brightness_set;
chip->cdev_torch.brightness_set = lm355x_torch_brightness_set;
err = led_classdev_register((struct device *)
&client->dev, &chip->cdev_torch);
if (err < 0)
goto err_create_torch_file;
/* indicator */
INIT_WORK(&chip->work_indicator,
lm355x_deferred_indicator_brightness_set);
chip->cdev_indicator.name = "indicator";
chip->cdev_indicator.max_brightness = 8;
chip->cdev_indicator.brightness_set = lm3556_indicator_brightness_set;
if (id->driver_data == CHIP_LM3554)
chip->cdev_indicator.max_brightness = 4;
else
chip->cdev_indicator.max_brightness = 8;
chip->cdev_indicator.brightness_set = lm355x_indicator_brightness_set;
err = led_classdev_register((struct device *)
&client->dev, &chip->cdev_indicator);
if (err < 0)
goto err_create_indicator_file;
/* indicator pattern control only for LM3554 */
if (id->driver_data == CHIP_LM3556) {
err =
device_create_file(chip->cdev_indicator.dev,
&dev_attr_pattern);
if (err < 0)
goto err_create_pattern_file;
}
err = device_create_file(chip->cdev_indicator.dev, &dev_attr_pattern);
if (err < 0)
goto err_create_pattern_file;
dev_info(&client->dev, "LM3556 is initialized\n");
dev_info(&client->dev, "%s is initialized\n",
lm355x_name[id->driver_data]);
return 0;
err_create_pattern_file:
......@@ -474,39 +526,47 @@ static int __devinit lm3556_probe(struct i2c_client *client,
return err;
}
static int __devexit lm3556_remove(struct i2c_client *client)
static int __devexit lm355x_remove(struct i2c_client *client)
{
struct lm3556_chip_data *chip = i2c_get_clientdata(client);
struct lm355x_chip_data *chip = i2c_get_clientdata(client);
struct lm355x_reg_data *preg = chip->regs;
device_remove_file(chip->cdev_indicator.dev, &dev_attr_pattern);
regmap_write(chip->regmap, preg[REG_OPMODE].regno, 0);
if (chip->type == CHIP_LM3556)
device_remove_file(chip->cdev_indicator.dev, &dev_attr_pattern);
led_classdev_unregister(&chip->cdev_indicator);
flush_work(&chip->work_indicator);
led_classdev_unregister(&chip->cdev_torch);
flush_work(&chip->work_torch);
led_classdev_unregister(&chip->cdev_flash);
regmap_write(chip->regmap, REG_ENABLE, 0);
flush_work(&chip->work_flash);
dev_info(&client->dev, "%s is removed\n", lm355x_name[chip->type]);
return 0;
}
static const struct i2c_device_id lm3556_id[] = {
{LM3556_NAME, 0},
static const struct i2c_device_id lm355x_id[] = {
{LM3554_NAME, CHIP_LM3554},
{LM3556_NAME, CHIP_LM3556},
{}
};
MODULE_DEVICE_TABLE(i2c, lm3556_id);
MODULE_DEVICE_TABLE(i2c, lm355x_id);
static struct i2c_driver lm3556_i2c_driver = {
static struct i2c_driver lm355x_i2c_driver = {
.driver = {
.name = LM3556_NAME,
.name = LM355x_NAME,
.owner = THIS_MODULE,
.pm = NULL,
},
.probe = lm3556_probe,
.remove = __devexit_p(lm3556_remove),
.id_table = lm3556_id,
.probe = lm355x_probe,
.remove = __devexit_p(lm355x_remove),
.id_table = lm355x_id,
};
module_i2c_driver(lm3556_i2c_driver);
module_i2c_driver(lm355x_i2c_driver);
MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3556");
MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM355x");
MODULE_AUTHOR("Daniel Jeong <daniel.jeong@ti.com>");
MODULE_AUTHOR("G.Shark Jeong <gshark.jeong@gmail.com>");
MODULE_LICENSE("GPL v2");
include/linux/platform_data/leds-lm3556.h deleted 100644 → 0
View file @ 56a1e9ad
/*
* Simple driver for Texas Instruments LM3556 LED Flash driver chip (Rev0x03)
* Copyright (C) 2012 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef __LINUX_LM3556_H
#define __LINUX_LM3556_H
#define LM3556_NAME "leds-lm3556"
enum lm3556_pin_polarity {
PIN_LOW_ACTIVE = 0,
PIN_HIGH_ACTIVE,
};
enum lm3556_pin_enable {
PIN_DISABLED = 0,
PIN_ENABLED,
};
enum lm3556_strobe_usuage {
STROBE_EDGE_DETECT = 0,
STROBE_LEVEL_DETECT,
};
enum lm3556_indic_mode {
INDIC_MODE_INTERNAL = 0,
INDIC_MODE_EXTERNAL,
};
struct lm3556_platform_data {
enum lm3556_pin_enable torch_pin_en;
enum lm3556_pin_polarity torch_pin_polarity;
enum lm3556_strobe_usuage strobe_usuage;
enum lm3556_pin_enable strobe_pin_en;
enum lm3556_pin_polarity strobe_pin_polarity;
enum lm3556_pin_enable tx_pin_en;
enum lm3556_pin_polarity tx_pin_polarity;
enum lm3556_indic_mode indicator_mode;
};
#endif /* __LINUX_LM3556_H */
include/linux/platform_data/leds-lm355x.h 0 → 100644
View file @ b98d13c7
/*
* Copyright (C) 2012 Texas Instruments
*
* License Terms: GNU General Public License v2
*
* Simple driver for Texas Instruments LM355x LED driver chip
*
* Author: G.Shark Jeong <gshark.jeong@gmail.com>
* Daniel Jeong <daniel.jeong@ti.com>
*/
#define LM355x_NAME "leds-lm355x"
#define LM3554_NAME "leds-lm3554"
#define LM3556_NAME "leds-lm3556"
/* lm3554 : strobe def. on */
enum lm355x_strobe {
LM355x_PIN_STROBE_DISABLE = 0x00,
LM355x_PIN_STROBE_ENABLE = 0x01,
};
enum lm355x_torch {
LM355x_PIN_TORCH_DISABLE = 0,
LM3554_PIN_TORCH_ENABLE = 0x80,
LM3556_PIN_TORCH_ENABLE = 0x10,
};
enum lm355x_tx2 {
LM355x_PIN_TX_DISABLE = 0,
LM3554_PIN_TX_ENABLE = 0x20,
LM3556_PIN_TX_ENABLE = 0x40,
};
enum lm355x_ntc {
LM355x_PIN_NTC_DISABLE = 0,
LM3554_PIN_NTC_ENABLE = 0x08,
LM3556_PIN_NTC_ENABLE = 0x80,
};
enum lm355x_pmode {
LM355x_PMODE_DISABLE = 0,
LM355x_PMODE_ENABLE = 0x04,
};
/*
* struct lm3554_platform_data
* @pin_strobe: strobe input
* @pin_torch : input pin
* lm3554-tx1/torch/gpio1
* lm3556-torch
* @pin_tx2 : input pin
* lm3554-envm/tx2/gpio2
* lm3556-tx pin
* @ntc_pin : output pin
* lm3554-ledi/ntc
* lm3556-temp pin
* @pass_mode : pass mode
*/
struct lm355x_platform_data {
enum lm355x_strobe pin_strobe;
enum lm355x_torch pin_tx1;
enum lm355x_tx2 pin_tx2;
enum lm355x_ntc ntc_pin;
enum lm355x_pmode pass_mode;
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7