media: v4l2-mediabus: Drop V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag

MIPI CSI-2 continuous and non-continuous clock modes are mutually
exclusive. Drop the V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag and use
V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

drivers/media/i2c/adv7180.c

@@ -785,8 +785,7 @@ static int adv7180_get_mbus_config(struct v4l2_subdev *sd,
 	if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
 		cfg->type = V4L2_MBUS_CSI2_DPHY;
 		cfg->bus.mipi_csi2.num_data_lanes = 1;
-		cfg->bus.mipi_csi2.flags =
-				V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
+		cfg->bus.mipi_csi2.flags = 0;
 	} else {
 		/*
 		 * The ADV7180 sensor supports BT.601/656 output modes.

drivers/media/i2c/tc358743.c

@@ -717,7 +717,7 @@ static void tc358743_set_csi(struct v4l2_subdev *sd)
 			((lanes > 3) ? MASK_D3M_HSTXVREGEN : 0x0));
 
 	i2c_wr32(sd, TXOPTIONCNTRL, (state->bus.flags &
-		 V4L2_MBUS_CSI2_CONTINUOUS_CLOCK) ? MASK_CONTCLKMODE : 0);
+		 V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK) ? 0 : MASK_CONTCLKMODE);
 	i2c_wr32(sd, STARTCNTRL, MASK_START);
 	i2c_wr32(sd, CSI_START, MASK_STRT);
 
@@ -1613,7 +1613,7 @@ static int tc358743_get_mbus_config(struct v4l2_subdev *sd,
 	cfg->type = V4L2_MBUS_CSI2_DPHY;
 
 	/* Support for non-continuous CSI-2 clock is missing in the driver */
-	cfg->bus.mipi_csi2.flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
+	cfg->bus.mipi_csi2.flags = 0;
 	cfg->bus.mipi_csi2.num_data_lanes = state->csi_lanes_in_use;
 
 	return 0;
@@ -2039,7 +2039,7 @@ static int tc358743_probe(struct i2c_client *client)
 	/* platform data */
 	if (pdata) {
 		state->pdata = *pdata;
-		state->bus.flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
+		state->bus.flags = 0;
 	} else {
 		err = tc358743_probe_of(state);
 		if (err == -ENODEV)

drivers/media/v4l2-core/v4l2-fwnode.c

@@ -207,13 +207,11 @@ static int v4l2_fwnode_endpoint_parse_csi2_bus(struct fwnode_handle *fwnode,
 	if (fwnode_property_present(fwnode, "clock-noncontinuous")) {
 		flags |= V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK;
 		pr_debug("non-continuous clock\n");
-	} else {
-		flags |= V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
 	}
 
 	if (bus_type == V4L2_MBUS_CSI2_DPHY ||
-	    bus_type == V4L2_MBUS_CSI2_CPHY || lanes_used ||
-	    have_clk_lane || (flags & ~V4L2_MBUS_CSI2_CONTINUOUS_CLOCK)) {
+	    bus_type == V4L2_MBUS_CSI2_CPHY ||
+	    lanes_used || have_clk_lane || flags) {
 		/* Only D-PHY has a clock lane. */
 		unsigned int dfl_data_lane_index =
 			bus_type == V4L2_MBUS_CSI2_DPHY;

include/media/v4l2-mediabus.h

@@ -68,8 +68,7 @@
 
 /* Serial flags */
 /* Clock non-continuous mode support. */
-#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK		BIT(8)
-#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK	BIT(9)
+#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK	BIT(0)
 
 #define V4L2_MBUS_CSI2_MAX_DATA_LANES		8