Commit ba6b3be0 authored by Thierry Reding's avatar Thierry Reding

Merge branch 'drm/panel/for-next' into drm/tegra/for-next

parents f114040e ed6ff40e
AU Optronics Corporation 11.6" HD (1366x768) color TFT-LCD panel
Required properties:
- compatible: should be "auo,b116xw03"
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.
HannStar Display Corp. HSD070PWW1 7.0" WXGA TFT LCD panel
Required properties:
- compatible: should be "hannstar,hsd070pww1"
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.
Hitachi Ltd. Corporation 9" WVGA (800x480) TFT LCD panel
Required properties:
- compatible: should be "hit,tx23d38vm0caa"
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.
Innolux Corporation 12.1" WXGA (1280x800) TFT LCD panel
Required properties:
- compatible: should be "innolux,g121i1-l01"
This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.
......@@ -64,8 +64,10 @@ gmt Global Mixed-mode Technology, Inc.
google Google, Inc.
gumstix Gumstix, Inc.
gw Gateworks Corporation
hannstar HannStar Display Corporation
haoyu Haoyu Microelectronic Co. Ltd.
hisilicon Hisilicon Limited.
hit Hitachi Ltd.
honeywell Honeywell
hp Hewlett Packard
i2se I2SE GmbH
......
......@@ -198,59 +198,238 @@ int mipi_dsi_detach(struct mipi_dsi_device *dsi)
}
EXPORT_SYMBOL(mipi_dsi_detach);
static ssize_t mipi_dsi_device_transfer(struct mipi_dsi_device *dsi,
struct mipi_dsi_msg *msg)
{
const struct mipi_dsi_host_ops *ops = dsi->host->ops;
if (!ops || !ops->transfer)
return -ENOSYS;
if (dsi->mode_flags & MIPI_DSI_MODE_LPM)
msg->flags |= MIPI_DSI_MSG_USE_LPM;
return ops->transfer(dsi->host, msg);
}
/**
* mipi_dsi_dcs_write - send DCS write command
* @dsi: DSI device
* @data: pointer to the command followed by parameters
* @len: length of @data
* mipi_dsi_packet_format_is_short - check if a packet is of the short format
* @type: MIPI DSI data type of the packet
*
* Return: true if the packet for the given data type is a short packet, false
* otherwise.
*/
ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, const void *data,
size_t len)
bool mipi_dsi_packet_format_is_short(u8 type)
{
switch (type) {
case MIPI_DSI_V_SYNC_START:
case MIPI_DSI_V_SYNC_END:
case MIPI_DSI_H_SYNC_START:
case MIPI_DSI_H_SYNC_END:
case MIPI_DSI_END_OF_TRANSMISSION:
case MIPI_DSI_COLOR_MODE_OFF:
case MIPI_DSI_COLOR_MODE_ON:
case MIPI_DSI_SHUTDOWN_PERIPHERAL:
case MIPI_DSI_TURN_ON_PERIPHERAL:
case MIPI_DSI_GENERIC_SHORT_WRITE_0_PARAM:
case MIPI_DSI_GENERIC_SHORT_WRITE_1_PARAM:
case MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_0_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_1_PARAM:
case MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM:
case MIPI_DSI_DCS_SHORT_WRITE:
case MIPI_DSI_DCS_SHORT_WRITE_PARAM:
case MIPI_DSI_DCS_READ:
case MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE:
return true;
}
return false;
}
EXPORT_SYMBOL(mipi_dsi_packet_format_is_short);
/**
* mipi_dsi_packet_format_is_long - check if a packet is of the long format
* @type: MIPI DSI data type of the packet
*
* Return: true if the packet for the given data type is a long packet, false
* otherwise.
*/
bool mipi_dsi_packet_format_is_long(u8 type)
{
switch (type) {
case MIPI_DSI_NULL_PACKET:
case MIPI_DSI_BLANKING_PACKET:
case MIPI_DSI_GENERIC_LONG_WRITE:
case MIPI_DSI_DCS_LONG_WRITE:
case MIPI_DSI_LOOSELY_PACKED_PIXEL_STREAM_YCBCR20:
case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR24:
case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR16:
case MIPI_DSI_PACKED_PIXEL_STREAM_30:
case MIPI_DSI_PACKED_PIXEL_STREAM_36:
case MIPI_DSI_PACKED_PIXEL_STREAM_YCBCR12:
case MIPI_DSI_PACKED_PIXEL_STREAM_16:
case MIPI_DSI_PACKED_PIXEL_STREAM_18:
case MIPI_DSI_PIXEL_STREAM_3BYTE_18:
case MIPI_DSI_PACKED_PIXEL_STREAM_24:
return true;
}
return false;
}
EXPORT_SYMBOL(mipi_dsi_packet_format_is_long);
/**
* mipi_dsi_create_packet - create a packet from a message according to the
* DSI protocol
* @packet: pointer to a DSI packet structure
* @msg: message to translate into a packet
*
* Return: 0 on success or a negative error code on failure.
*/
int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
const struct mipi_dsi_msg *msg)
{
const u8 *tx = msg->tx_buf;
if (!packet || !msg)
return -EINVAL;
/* do some minimum sanity checking */
if (!mipi_dsi_packet_format_is_short(msg->type) &&
!mipi_dsi_packet_format_is_long(msg->type))
return -EINVAL;
if (msg->channel > 3)
return -EINVAL;
memset(packet, 0, sizeof(*packet));
packet->header[0] = ((msg->channel & 0x3) << 6) | (msg->type & 0x3f);
/* TODO: compute ECC if hardware support is not available */
/*
* Long write packets contain the word count in header bytes 1 and 2.
* The payload follows the header and is word count bytes long.
*
* Short write packets encode up to two parameters in header bytes 1
* and 2.
*/
if (mipi_dsi_packet_format_is_long(msg->type)) {
packet->header[1] = (msg->tx_len >> 0) & 0xff;
packet->header[2] = (msg->tx_len >> 8) & 0xff;
packet->payload_length = msg->tx_len;
packet->payload = tx;
} else {
packet->header[1] = (msg->tx_len > 0) ? tx[0] : 0;
packet->header[2] = (msg->tx_len > 1) ? tx[1] : 0;
}
packet->size = sizeof(packet->header) + packet->payload_length;
return 0;
}
EXPORT_SYMBOL(mipi_dsi_create_packet);
/**
* mipi_dsi_dcs_write_buffer() - transmit a DCS command with payload
* @dsi: DSI peripheral device
* @data: buffer containing data to be transmitted
* @len: size of transmission buffer
*
* This function will automatically choose the right data type depending on
* the command payload length.
*
* Return: The number of bytes successfully transmitted or a negative error
* code on failure.
*/
ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
const void *data, size_t len)
{
const struct mipi_dsi_host_ops *ops = dsi->host->ops;
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.tx_buf = data,
.tx_len = len
};
if (!ops || !ops->transfer)
return -ENOSYS;
switch (len) {
case 0:
return -EINVAL;
case 1:
msg.type = MIPI_DSI_DCS_SHORT_WRITE;
break;
case 2:
msg.type = MIPI_DSI_DCS_SHORT_WRITE_PARAM;
break;
default:
msg.type = MIPI_DSI_DCS_LONG_WRITE;
break;
}
if (dsi->mode_flags & MIPI_DSI_MODE_LPM)
msg.flags = MIPI_DSI_MSG_USE_LPM;
return mipi_dsi_device_transfer(dsi, &msg);
}
EXPORT_SYMBOL(mipi_dsi_dcs_write_buffer);
/**
* mipi_dsi_dcs_write() - send DCS write command
* @dsi: DSI peripheral device
* @cmd: DCS command
* @data: buffer containing the command payload
* @len: command payload length
*
* This function will automatically choose the right data type depending on
* the command payload length.
*
* Return: The number of bytes successfully transmitted or a negative error
* code on failure.
*/
ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
const void *data, size_t len)
{
ssize_t err;
size_t size;
u8 *tx;
if (len > 0) {
size = 1 + len;
tx = kmalloc(size, GFP_KERNEL);
if (!tx)
return -ENOMEM;
/* concatenate the DCS command byte and the payload */
tx[0] = cmd;
memcpy(&tx[1], data, len);
} else {
tx = &cmd;
size = 1;
}
err = mipi_dsi_dcs_write_buffer(dsi, tx, size);
if (len > 0)
kfree(tx);
return ops->transfer(dsi->host, &msg);
return err;
}
EXPORT_SYMBOL(mipi_dsi_dcs_write);
/**
* mipi_dsi_dcs_read - send DCS read request command
* @dsi: DSI device
* @cmd: DCS read command
* @data: pointer to read buffer
* @len: length of @data
* mipi_dsi_dcs_read() - send DCS read request command
* @dsi: DSI peripheral device
* @cmd: DCS command
* @data: buffer in which to receive data
* @len: size of receive buffer
*
* Function returns number of read bytes or error code.
* Return: The number of bytes read or a negative error code on failure.
*/
ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
size_t len)
{
const struct mipi_dsi_host_ops *ops = dsi->host->ops;
struct mipi_dsi_msg msg = {
.channel = dsi->channel,
.type = MIPI_DSI_DCS_READ,
......@@ -260,13 +439,7 @@ ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
.rx_len = len
};
if (!ops || !ops->transfer)
return -ENOSYS;
if (dsi->mode_flags & MIPI_DSI_MODE_LPM)
msg.flags = MIPI_DSI_MSG_USE_LPM;
return ops->transfer(dsi->host, &msg);
return mipi_dsi_device_transfer(dsi, &msg);
}
EXPORT_SYMBOL(mipi_dsi_dcs_read);
......
......@@ -1236,7 +1236,7 @@ static bool exynos_dsi_is_short_dsi_type(u8 type)
}
static ssize_t exynos_dsi_host_transfer(struct mipi_dsi_host *host,
struct mipi_dsi_msg *msg)
const struct mipi_dsi_msg *msg)
{
struct exynos_dsi *dsi = host_to_dsi(host);
struct exynos_dsi_transfer xfer;
......
......@@ -145,7 +145,7 @@ static void ld9040_dcs_write(struct ld9040 *ctx, const u8 *data, size_t len)
if (ctx->error < 0 || len == 0)
return;
dev_dbg(ctx->dev, "writing dcs seq: %*ph\n", len, data);
dev_dbg(ctx->dev, "writing dcs seq: %*ph\n", (int)len, data);
ret = ld9040_spi_write_word(ctx, *data);
while (!ret && --len) {
......@@ -154,8 +154,8 @@ static void ld9040_dcs_write(struct ld9040 *ctx, const u8 *data, size_t len)
}
if (ret) {
dev_err(ctx->dev, "error %d writing dcs seq: %*ph\n", ret, len,
data);
dev_err(ctx->dev, "error %d writing dcs seq: %*ph\n", ret,
(int)len, data);
ctx->error = ret;
}
......@@ -336,17 +336,12 @@ static int ld9040_probe(struct spi_device *spi)
if (ret < 0)
return ret;
ctx->reset_gpio = devm_gpiod_get(dev, "reset");
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(ctx->reset_gpio)) {
dev_err(dev, "cannot get reset-gpios %ld\n",
PTR_ERR(ctx->reset_gpio));
return PTR_ERR(ctx->reset_gpio);
}
ret = gpiod_direction_output(ctx->reset_gpio, 1);
if (ret < 0) {
dev_err(dev, "cannot configure reset-gpios %d\n", ret);
return ret;
}
spi->bits_per_word = 9;
ret = spi_setup(spi);
......
......@@ -141,10 +141,10 @@ static void s6e8aa0_dcs_write(struct s6e8aa0 *ctx, const void *data, size_t len)
if (ctx->error < 0)
return;
ret = mipi_dsi_dcs_write(dsi, data, len);
ret = mipi_dsi_dcs_write_buffer(dsi, data, len);
if (ret < 0) {
dev_err(ctx->dev, "error %zd writing dcs seq: %*ph\n", ret, len,
data);
dev_err(ctx->dev, "error %zd writing dcs seq: %*ph\n", ret,
(int)len, data);
ctx->error = ret;
}
}
......@@ -1019,17 +1019,12 @@ static int s6e8aa0_probe(struct mipi_dsi_device *dsi)
return ret;
}
ctx->reset_gpio = devm_gpiod_get(dev, "reset");
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(ctx->reset_gpio)) {
dev_err(dev, "cannot get reset-gpios %ld\n",
PTR_ERR(ctx->reset_gpio));
return PTR_ERR(ctx->reset_gpio);
}
ret = gpiod_direction_output(ctx->reset_gpio, 1);
if (ret < 0) {
dev_err(dev, "cannot configure reset-gpios %d\n", ret);
return ret;
}
ctx->brightness = GAMMA_LEVEL_NUM - 1;
......
......@@ -247,21 +247,14 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
if (IS_ERR(panel->supply))
return PTR_ERR(panel->supply);
panel->enable_gpio = devm_gpiod_get_optional(dev, "enable");
panel->enable_gpio = devm_gpiod_get_optional(dev, "enable",
GPIOD_OUT_LOW);
if (IS_ERR(panel->enable_gpio)) {
err = PTR_ERR(panel->enable_gpio);
dev_err(dev, "failed to request GPIO: %d\n", err);
return err;
}
if (panel->enable_gpio) {
err = gpiod_direction_output(panel->enable_gpio, 0);
if (err < 0) {
dev_err(dev, "failed to setup GPIO: %d\n", err);
return err;
}
}
backlight = of_parse_phandle(dev->of_node, "backlight", 0);
if (backlight) {
panel->backlight = of_find_backlight_by_node(backlight);
......@@ -376,6 +369,29 @@ static const struct panel_desc auo_b101xtn01 = {
},
};
static const struct drm_display_mode auo_b116xw03_mode = {
.clock = 70589,
.hdisplay = 1366,
.hsync_start = 1366 + 40,
.hsync_end = 1366 + 40 + 40,
.htotal = 1366 + 40 + 40 + 32,
.vdisplay = 768,
.vsync_start = 768 + 10,
.vsync_end = 768 + 10 + 12,
.vtotal = 768 + 10 + 12 + 6,
.vrefresh = 60,
};
static const struct panel_desc auo_b116xw03 = {
.modes = &auo_b116xw03_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 256,
.height = 144,
},
};
static const struct drm_display_mode auo_b133xtn01_mode = {
.clock = 69500,
.hdisplay = 1366,
......@@ -415,6 +431,7 @@ static const struct drm_display_mode auo_b133htn01_mode = {
static const struct panel_desc auo_b133htn01 = {
.modes = &auo_b133htn01_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 293,
.height = 165,
......@@ -536,22 +553,92 @@ static const struct drm_display_mode foxlink_fl500wvr00_a0t_mode = {
static const struct panel_desc foxlink_fl500wvr00_a0t = {
.modes = &foxlink_fl500wvr00_a0t_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 108,
.height = 65,
},
};
static const struct drm_display_mode innolux_n116bge_mode = {
static const struct drm_display_mode hannstar_hsd070pww1_mode = {
.clock = 71100,
.hdisplay = 1280,
.hsync_start = 1280 + 1,
.hsync_end = 1280 + 1 + 158,
.htotal = 1280 + 1 + 158 + 1,
.vdisplay = 800,
.vsync_start = 800 + 1,
.vsync_end = 800 + 1 + 21,
.vtotal = 800 + 1 + 21 + 1,
.vrefresh = 60,
};
static const struct panel_desc hannstar_hsd070pww1 = {
.modes = &hannstar_hsd070pww1_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 151,
.height = 94,
},
};
static const struct drm_display_mode hitachi_tx23d38vm0caa_mode = {
.clock = 33333,
.hdisplay = 800,
.hsync_start = 800 + 85,
.hsync_end = 800 + 85 + 86,
.htotal = 800 + 85 + 86 + 85,
.vdisplay = 480,
.vsync_start = 480 + 16,
.vsync_end = 480 + 16 + 13,
.vtotal = 480 + 16 + 13 + 16,
.vrefresh = 60,
};
static const struct panel_desc hitachi_tx23d38vm0caa = {
.modes = &hitachi_tx23d38vm0caa_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 195,
.height = 117,
},
};
static const struct drm_display_mode innolux_g121i1_l01_mode = {
.clock = 71000,
.hdisplay = 1280,
.hsync_start = 1280 + 64,
.hsync_end = 1280 + 64 + 32,
.htotal = 1280 + 64 + 32 + 64,
.vdisplay = 800,
.vsync_start = 800 + 9,
.vsync_end = 800 + 9 + 6,
.vtotal = 800 + 9 + 6 + 9,
.vrefresh = 60,
};
static const struct panel_desc innolux_g121i1_l01 = {
.modes = &innolux_g121i1_l01_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 261,
.height = 163,
},
};
static const struct drm_display_mode innolux_n116bge_mode = {
.clock = 76420,
.hdisplay = 1366,
.hsync_start = 1366 + 64,
.hsync_end = 1366 + 64 + 6,
.htotal = 1366 + 64 + 6 + 64,
.hsync_start = 1366 + 136,
.hsync_end = 1366 + 136 + 30,
.htotal = 1366 + 136 + 30 + 60,
.vdisplay = 768,
.vsync_start = 768 + 8,
.vsync_end = 768 + 8 + 4,
.vtotal = 768 + 8 + 4 + 8,
.vsync_end = 768 + 8 + 12,
.vtotal = 768 + 8 + 12 + 12,
.vrefresh = 60,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
};
......@@ -642,6 +729,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "auo,b101xtn01",
.data = &auo_b101xtn01,
}, {
.compatible = "auo,b116xw03",
.data = &auo_b116xw03,
}, {
.compatible = "auo,b133htn01",
.data = &auo_b133htn01,
......@@ -666,6 +756,15 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "foxlink,fl500wvr00-a0t",
.data = &foxlink_fl500wvr00_a0t,
}, {
.compatible = "hannstar,hsd070pww1",
.data = &hannstar_hsd070pww1,
}, {
.compatible = "hit,tx23d38vm0caa",
.data = &hitachi_tx23d38vm0caa
}, {
.compatible ="innolux,g121i1-l01",
.data = &innolux_g121i1_l01
}, {
.compatible = "innolux,n116bge",
.data = &innolux_n116bge,
......@@ -741,6 +840,7 @@ static const struct panel_desc_dsi lg_ld070wx3_sl01 = {
.desc = {
.modes = &lg_ld070wx3_sl01_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 94,
.height = 151,
......@@ -768,6 +868,7 @@ static const struct panel_desc_dsi lg_lh500wx1_sd03 = {
.desc = {
.modes = &lg_lh500wx1_sd03_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 62,
.height = 110,
......@@ -795,6 +896,7 @@ static const struct panel_desc_dsi panasonic_vvx10f004b00 = {
.desc = {
.modes = &panasonic_vvx10f004b00_mode,
.num_modes = 1,
.bpc = 8,
.size = {
.width = 217,
.height = 136,
......
......@@ -43,6 +43,27 @@ struct mipi_dsi_msg {
void *rx_buf;
};
bool mipi_dsi_packet_format_is_short(u8 type);
bool mipi_dsi_packet_format_is_long(u8 type);
/**
* struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format
* @size: size (in bytes) of the packet
* @header: the four bytes that make up the header (Data ID, Word Count or
* Packet Data, and ECC)
* @payload_length: number of bytes in the payload
* @payload: a pointer to a buffer containing the payload, if any
*/
struct mipi_dsi_packet {
size_t size;
u8 header[4];
size_t payload_length;
const u8 *payload;
};
int mipi_dsi_create_packet(struct mipi_dsi_packet *packet,
const struct mipi_dsi_msg *msg);
/**
* struct mipi_dsi_host_ops - DSI bus operations
* @attach: attach DSI device to DSI host
......@@ -56,7 +77,7 @@ struct mipi_dsi_host_ops {
int (*detach)(struct mipi_dsi_host *host,
struct mipi_dsi_device *dsi);
ssize_t (*transfer)(struct mipi_dsi_host *host,
struct mipi_dsi_msg *msg);
const struct mipi_dsi_msg *msg);
};
/**
......@@ -132,8 +153,10 @@ static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev)
int mipi_dsi_attach(struct mipi_dsi_device *dsi);
int mipi_dsi_detach(struct mipi_dsi_device *dsi);
ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, const void *data,
size_t len);
ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi,
const void *data, size_t len);
ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd,
const void *data, size_t len);
ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data,
size_t len);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment