Commit ba789170 authored by Fabio Estevam's avatar Fabio Estevam Committed by Felipe Balbi

usb: gadget: fsl_mxc_udc: do not depend on grouped clocks

With the new common clock infrastructure, the following clocks should be
used on i.MX drivers: ipg, per and ahb.

Adapt fsl_mxc_udc to follow this new behaviour to fix the following probe error:

Freescale High-Speed USB SOC Device Controller driver (Apr 20, 2007)
fsl-usb2-udc fsl-usb2-udc: clk_get("usb") failed
fsl-usb2-udc: probe of fsl-usb2-udc failed with error -2
Reported-by: default avatarChristoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
Acked-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 3d4eb9df
......@@ -21,7 +21,8 @@
#include <mach/hardware.h>
static struct clk *mxc_ahb_clk;
static struct clk *mxc_usb_clk;
static struct clk *mxc_per_clk;
static struct clk *mxc_ipg_clk;
/* workaround ENGcm09152 for i.MX35 */
#define USBPHYCTRL_OTGBASE_OFFSET 0x608
......@@ -35,28 +36,31 @@ int fsl_udc_clk_init(struct platform_device *pdev)
pdata = pdev->dev.platform_data;
if (!cpu_is_mx35() && !cpu_is_mx25()) {
mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
if (IS_ERR(mxc_ahb_clk))
return PTR_ERR(mxc_ahb_clk);
ret = clk_prepare_enable(mxc_ahb_clk);
if (ret < 0) {
dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
goto eenahb;
mxc_ipg_clk = devm_clk_get(&pdev->dev, "ipg");
if (IS_ERR(mxc_ipg_clk)) {
dev_err(&pdev->dev, "clk_get(\"ipg\") failed\n");
return PTR_ERR(mxc_ipg_clk);
}
mxc_ahb_clk = devm_clk_get(&pdev->dev, "ahb");
if (IS_ERR(mxc_ahb_clk)) {
dev_err(&pdev->dev, "clk_get(\"ahb\") failed\n");
return PTR_ERR(mxc_ahb_clk);
}
/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
mxc_usb_clk = clk_get(&pdev->dev, "usb");
if (IS_ERR(mxc_usb_clk)) {
dev_err(&pdev->dev, "clk_get(\"usb\") failed\n");
ret = PTR_ERR(mxc_usb_clk);
goto egusb;
mxc_per_clk = devm_clk_get(&pdev->dev, "per");
if (IS_ERR(mxc_per_clk)) {
dev_err(&pdev->dev, "clk_get(\"per\") failed\n");
return PTR_ERR(mxc_per_clk);
}
clk_prepare_enable(mxc_ipg_clk);
clk_prepare_enable(mxc_ahb_clk);
clk_prepare_enable(mxc_per_clk);
/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
if (!cpu_is_mx51()) {
freq = clk_get_rate(mxc_usb_clk);
freq = clk_get_rate(mxc_per_clk);
if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
(freq < 59999000 || freq > 60001000)) {
dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
......@@ -65,24 +69,13 @@ int fsl_udc_clk_init(struct platform_device *pdev)
}
}
ret = clk_prepare_enable(mxc_usb_clk);
if (ret < 0) {
dev_err(&pdev->dev, "clk_enable(\"usb_clk\") failed\n");
goto eenusb;
}
return 0;
eenusb:
eclkrate:
clk_put(mxc_usb_clk);
mxc_usb_clk = NULL;
egusb:
if (!cpu_is_mx35())
clk_disable_unprepare(mxc_ipg_clk);
clk_disable_unprepare(mxc_ahb_clk);
eenahb:
if (!cpu_is_mx35())
clk_put(mxc_ahb_clk);
clk_disable_unprepare(mxc_per_clk);
mxc_per_clk = NULL;
return ret;
}
......@@ -104,20 +97,15 @@ void fsl_udc_clk_finalize(struct platform_device *pdev)
/* ULPI transceivers don't need usbpll */
if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
clk_disable_unprepare(mxc_usb_clk);
clk_put(mxc_usb_clk);
mxc_usb_clk = NULL;
clk_disable_unprepare(mxc_per_clk);
mxc_per_clk = NULL;
}
}
void fsl_udc_clk_release(void)
{
if (mxc_usb_clk) {
clk_disable_unprepare(mxc_usb_clk);
clk_put(mxc_usb_clk);
}
if (!cpu_is_mx35()) {
if (mxc_per_clk)
clk_disable_unprepare(mxc_per_clk);
clk_disable_unprepare(mxc_ahb_clk);
clk_put(mxc_ahb_clk);
}
clk_disable_unprepare(mxc_ipg_clk);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment