i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780

Adds the i2c bus controller driver for the Ingenic JZ4780 SoC.
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Documentation/devicetree/bindings/i2c/i2c-jz4780.txt

+* Ingenic JZ4780 I2C Bus controller
+
+Required properties:
+- compatible: should be "ingenic,jz4780-i2c"
+- reg: Should contain the address & size of the I2C controller registers.
+- interrupts: Should specify the interrupt provided by parent.
+- clocks: Should contain a single clock specifier for the JZ4780 I2C clock.
+- clock-frequency: desired I2C bus clock frequency in Hz.
+
+Recommended properties:
+- pinctrl-names: should be "default";
+- pinctrl-0: phandle to pinctrl function
+
+Optional properties:
+- interrupt-parent: Should be the phandle of the interrupt controller that
+  delivers interrupts to the I2C block.
+
+Example
+
+/ {
+	i2c4: i2c4@0x10054000 {
+		compatible = "ingenic,jz4780-i2c";
+		reg = <0x10054000 0x1000>;
+
+		interrupt-parent = <&intc>;
+		interrupts = <56>;
+
+		clocks = <&cgu JZ4780_CLK_SMB4>;
+		clock-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_i2c4_data>;
+
+	};
+};
+

drivers/i2c/busses/Kconfig

@@ -583,6 +583,15 @@ config I2C_IOP3XX
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-iop3xx.
 
+config I2C_JZ4780
+	tristate "JZ4780 I2C controller interface support"
+	depends on MACH_JZ4780 || COMPILE_TEST
+	help
+	 If you say yes to this option, support will be included for the
+	 Ingenic JZ4780 I2C controller.
+
+	 If you don't know what to do here, say N.
+
 config I2C_KEMPLD
 	tristate "Kontron COM I2C Controller"
 	depends on MFD_KEMPLD

drivers/i2c/busses/Makefile

@@ -56,6 +56,7 @@ obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
 obj-$(CONFIG_I2C_IMG)		+= i2c-img-scb.o
 obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
+obj-$(CONFIG_I2C_JZ4780)	+= i2c-jz4780.o
 obj-$(CONFIG_I2C_KEMPLD)	+= i2c-kempld.o
 obj-$(CONFIG_I2C_MESON)		+= i2c-meson.o
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o

drivers/i2c/busses/i2c-jz4780.c

+/*
+ * Ingenic JZ4780 I2C bus driver
+ *
+ * Copyright (C) 2006 - 2009 Ingenic Semiconductor Inc.
+ * Copyright (C) 2015 Imagination Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+
+#define JZ4780_I2C_CTRL		0x00
+#define JZ4780_I2C_TAR		0x04
+#define JZ4780_I2C_SAR		0x08
+#define JZ4780_I2C_DC		0x10
+#define JZ4780_I2C_SHCNT	0x14
+#define JZ4780_I2C_SLCNT	0x18
+#define JZ4780_I2C_FHCNT	0x1C
+#define JZ4780_I2C_FLCNT	0x20
+#define JZ4780_I2C_INTST	0x2C
+#define JZ4780_I2C_INTM		0x30
+#define JZ4780_I2C_RXTL		0x38
+#define JZ4780_I2C_TXTL		0x3C
+#define JZ4780_I2C_CINTR	0x40
+#define JZ4780_I2C_CRXUF	0x44
+#define JZ4780_I2C_CRXOF	0x48
+#define JZ4780_I2C_CTXOF	0x4C
+#define JZ4780_I2C_CRXREQ	0x50
+#define JZ4780_I2C_CTXABRT	0x54
+#define JZ4780_I2C_CRXDONE	0x58
+#define JZ4780_I2C_CACT		0x5C
+#define JZ4780_I2C_CSTP		0x60
+#define JZ4780_I2C_CSTT		0x64
+#define JZ4780_I2C_CGC		0x68
+#define JZ4780_I2C_ENB		0x6C
+#define JZ4780_I2C_STA		0x70
+#define JZ4780_I2C_TXABRT	0x80
+#define JZ4780_I2C_DMACR	0x88
+#define JZ4780_I2C_DMATDLR	0x8C
+#define JZ4780_I2C_DMARDLR	0x90
+#define JZ4780_I2C_SDASU	0x94
+#define JZ4780_I2C_ACKGC	0x98
+#define JZ4780_I2C_ENSTA	0x9C
+#define JZ4780_I2C_SDAHD	0xD0
+
+#define JZ4780_I2C_CTRL_STPHLD		BIT(7)
+#define JZ4780_I2C_CTRL_SLVDIS		BIT(6)
+#define JZ4780_I2C_CTRL_REST		BIT(5)
+#define JZ4780_I2C_CTRL_MATP		BIT(4)
+#define JZ4780_I2C_CTRL_SATP		BIT(3)
+#define JZ4780_I2C_CTRL_SPDF		BIT(2)
+#define JZ4780_I2C_CTRL_SPDS		BIT(1)
+#define JZ4780_I2C_CTRL_MD		BIT(0)
+
+#define JZ4780_I2C_STA_SLVACT		BIT(6)
+#define JZ4780_I2C_STA_MSTACT		BIT(5)
+#define JZ4780_I2C_STA_RFF		BIT(4)
+#define JZ4780_I2C_STA_RFNE		BIT(3)
+#define JZ4780_I2C_STA_TFE		BIT(2)
+#define JZ4780_I2C_STA_TFNF		BIT(1)
+#define JZ4780_I2C_STA_ACT		BIT(0)
+
+static const char * const jz4780_i2c_abrt_src[] = {
+	"ABRT_7B_ADDR_NOACK",
+	"ABRT_10ADDR1_NOACK",
+	"ABRT_10ADDR2_NOACK",
+	"ABRT_XDATA_NOACK",
+	"ABRT_GCALL_NOACK",
+	"ABRT_GCALL_READ",
+	"ABRT_HS_ACKD",
+	"SBYTE_ACKDET",
+	"ABRT_HS_NORSTRT",
+	"SBYTE_NORSTRT",
+	"ABRT_10B_RD_NORSTRT",
+	"ABRT_MASTER_DIS",
+	"ARB_LOST",
+	"SLVFLUSH_TXFIFO",
+	"SLV_ARBLOST",
+	"SLVRD_INTX",
+};
+
+#define JZ4780_I2C_INTST_IGC		BIT(11)
+#define JZ4780_I2C_INTST_ISTT		BIT(10)
+#define JZ4780_I2C_INTST_ISTP		BIT(9)
+#define JZ4780_I2C_INTST_IACT		BIT(8)
+#define JZ4780_I2C_INTST_RXDN		BIT(7)
+#define JZ4780_I2C_INTST_TXABT		BIT(6)
+#define JZ4780_I2C_INTST_RDREQ		BIT(5)
+#define JZ4780_I2C_INTST_TXEMP		BIT(4)
+#define JZ4780_I2C_INTST_TXOF		BIT(3)
+#define JZ4780_I2C_INTST_RXFL		BIT(2)
+#define JZ4780_I2C_INTST_RXOF		BIT(1)
+#define JZ4780_I2C_INTST_RXUF		BIT(0)
+
+#define JZ4780_I2C_INTM_MIGC		BIT(11)
+#define JZ4780_I2C_INTM_MISTT		BIT(10)
+#define JZ4780_I2C_INTM_MISTP		BIT(9)
+#define JZ4780_I2C_INTM_MIACT		BIT(8)
+#define JZ4780_I2C_INTM_MRXDN		BIT(7)
+#define JZ4780_I2C_INTM_MTXABT		BIT(6)
+#define JZ4780_I2C_INTM_MRDREQ		BIT(5)
+#define JZ4780_I2C_INTM_MTXEMP		BIT(4)
+#define JZ4780_I2C_INTM_MTXOF		BIT(3)
+#define JZ4780_I2C_INTM_MRXFL		BIT(2)
+#define JZ4780_I2C_INTM_MRXOF		BIT(1)
+#define JZ4780_I2C_INTM_MRXUF		BIT(0)
+
+#define JZ4780_I2C_DC_READ		BIT(8)
+
+#define JZ4780_I2C_SDAHD_HDENB		BIT(8)
+
+#define JZ4780_I2C_ENB_I2C		BIT(0)
+
+#define JZ4780_I2CSHCNT_ADJUST(n)	(((n) - 8) < 6 ? 6 : ((n) - 8))
+#define JZ4780_I2CSLCNT_ADJUST(n)	(((n) - 1) < 8 ? 8 : ((n) - 1))
+#define JZ4780_I2CFHCNT_ADJUST(n)	(((n) - 8) < 6 ? 6 : ((n) - 8))
+#define JZ4780_I2CFLCNT_ADJUST(n)	(((n) - 1) < 8 ? 8 : ((n) - 1))
+
+#define JZ4780_I2C_FIFO_LEN	16
+#define TX_LEVEL		3
+#define RX_LEVEL		(JZ4780_I2C_FIFO_LEN - TX_LEVEL - 1)
+
+#define JZ4780_I2C_TIMEOUT	300
+
+#define BUFSIZE 200
+
+struct jz4780_i2c {
+	void __iomem		*iomem;
+	int			 irq;
+	struct clk		*clk;
+	struct i2c_adapter	 adap;
+
+	/* lock to protect rbuf and wbuf between xfer_rd/wr and irq handler */
+	spinlock_t		lock;
+
+	/* beginning of lock scope */
+	unsigned char		*rbuf;
+	int			rd_total_len;
+	int			rd_data_xfered;
+	int			rd_cmd_xfered;
+
+	unsigned char		*wbuf;
+	int			wt_len;
+
+	int			is_write;
+	int			stop_hold;
+	int			speed;
+
+	int			data_buf[BUFSIZE];
+	int			cmd_buf[BUFSIZE];
+	int			cmd;
+
+	/* end of lock scope */
+	struct completion	trans_waitq;
+};
+
+static inline unsigned short jz4780_i2c_readw(struct jz4780_i2c *i2c,
+					      unsigned long offset)
+{
+	return readw(i2c->iomem + offset);
+}
+
+static inline void jz4780_i2c_writew(struct jz4780_i2c *i2c,
+				     unsigned long offset, unsigned short val)
+{
+	writew(val, i2c->iomem + offset);
+}
+
+static int jz4780_i2c_disable(struct jz4780_i2c *i2c)
+{
+	unsigned short regval;
+	unsigned long loops = 5;
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_ENB, 0);
+
+	do {
+		regval = jz4780_i2c_readw(i2c, JZ4780_I2C_ENSTA);
+		if (!(regval & JZ4780_I2C_ENB_I2C))
+			return 0;
+
+		usleep_range(5000, 15000);
+	} while (--loops);
+
+	dev_err(&i2c->adap.dev, "disable failed: ENSTA=0x%04x\n", regval);
+	return -ETIMEDOUT;
+}
+
+static int jz4780_i2c_enable(struct jz4780_i2c *i2c)
+{
+	unsigned short regval;
+	unsigned long loops = 5;
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_ENB, 1);
+
+	do {
+		regval = jz4780_i2c_readw(i2c, JZ4780_I2C_ENSTA);
+		if (regval & JZ4780_I2C_ENB_I2C)
+			return 0;
+
+		usleep_range(5000, 15000);
+	} while (--loops);
+
+	dev_err(&i2c->adap.dev, "enable failed: ENSTA=0x%04x\n", regval);
+	return -ETIMEDOUT;
+}
+
+static int jz4780_i2c_set_target(struct jz4780_i2c *i2c, unsigned char address)
+{
+	unsigned short regval;
+	unsigned long loops = 5;
+
+	do {
+		regval = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
+		if ((regval & JZ4780_I2C_STA_TFE) &&
+		    !(regval & JZ4780_I2C_STA_MSTACT))
+			break;
+
+		usleep_range(5000, 15000);
+	} while (--loops);
+
+	if (loops) {
+		jz4780_i2c_writew(i2c, JZ4780_I2C_TAR, address);
+		return 0;
+	}
+
+	dev_err(&i2c->adap.dev,
+		"set device to address 0x%02x failed, STA=0x%04x\n",
+		address, regval);
+
+	return -ENXIO;
+}
+
+static int jz4780_i2c_set_speed(struct jz4780_i2c *i2c)
+{
+	int dev_clk_khz = clk_get_rate(i2c->clk) / 1000;
+	int cnt_high = 0;	/* HIGH period count of the SCL clock */
+	int cnt_low = 0;	/* LOW period count of the SCL clock */
+	int cnt_period = 0;	/* period count of the SCL clock */
+	int setup_time = 0;
+	int hold_time = 0;
+	unsigned short tmp = 0;
+	int i2c_clk = i2c->speed;
+
+	if (jz4780_i2c_disable(i2c))
+		dev_dbg(&i2c->adap.dev, "i2c not disabled\n");
+
+	/*
+	 * 1 JZ4780_I2C cycle equals to cnt_period PCLK(i2c_clk)
+	 * standard mode, min LOW and HIGH period are 4700 ns and 4000 ns
+	 * fast mode, min LOW and HIGH period are 1300 ns and 600 ns
+	 */
+	cnt_period = dev_clk_khz / i2c_clk;
+
+	if (i2c_clk <= 100)
+		cnt_high = (cnt_period * 4000) / (4700 + 4000);
+	else
+		cnt_high = (cnt_period * 600) / (1300 + 600);
+
+	cnt_low = cnt_period - cnt_high;
+
+	/*
+	 * NOTE: JZ4780_I2C_CTRL_REST can't set when i2c enabled, because
+	 * normal read are 2 messages, we cannot disable i2c controller
+	 * between these two messages, this means that we must always set
+	 * JZ4780_I2C_CTRL_REST when init JZ4780_I2C_CTRL
+	 *
+	 */
+	if (i2c_clk <= 100) {
+		tmp = JZ4780_I2C_CTRL_SPDS | JZ4780_I2C_CTRL_REST
+		      | JZ4780_I2C_CTRL_SLVDIS | JZ4780_I2C_CTRL_MD;
+		jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+		jz4780_i2c_writew(i2c, JZ4780_I2C_SHCNT,
+				  JZ4780_I2CSHCNT_ADJUST(cnt_high));
+		jz4780_i2c_writew(i2c, JZ4780_I2C_SLCNT,
+				  JZ4780_I2CSLCNT_ADJUST(cnt_low));
+	} else {
+		tmp = JZ4780_I2C_CTRL_SPDF | JZ4780_I2C_CTRL_REST
+		      | JZ4780_I2C_CTRL_SLVDIS | JZ4780_I2C_CTRL_MD;
+		jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+		jz4780_i2c_writew(i2c, JZ4780_I2C_FHCNT,
+				  JZ4780_I2CFHCNT_ADJUST(cnt_high));
+		jz4780_i2c_writew(i2c, JZ4780_I2C_FLCNT,
+				  JZ4780_I2CFLCNT_ADJUST(cnt_low));
+	}
+
+	/*
+	 * a i2c device must internally provide a hold time at least 300ns
+	 * tHD:DAT
+	 *	Standard Mode: min=300ns, max=3450ns
+	 *	Fast Mode: min=0ns, max=900ns
+	 * tSU:DAT
+	 *	Standard Mode: min=250ns, max=infinite
+	 *	Fast Mode: min=100(250ns is recommended), max=infinite
+	 *
+	 * 1i2c_clk = 10^6 / dev_clk_khz
+	 * on FPGA, dev_clk_khz = 12000, so 1i2c_clk = 1000/12 = 83ns
+	 * on Pisces(1008M), dev_clk_khz=126000, so 1i2c_clk = 1000 / 126 = 8ns
+	 *
+	 * The actual hold time is (SDAHD + 1) * (i2c_clk period).
+	 *
+	 * Length of setup time calculated using (SDASU - 1) * (ic_clk_period)
+	 *
+	 */
+	if (i2c_clk <= 100) { /* standard mode */
+		setup_time = 300;
+		hold_time = 400;
+	} else {
+		setup_time = 450;
+		hold_time = 450;
+	}
+
+	hold_time = ((hold_time * dev_clk_khz) / 1000000) - 1;
+	setup_time = ((setup_time * dev_clk_khz) / 1000000)  + 1;
+
+	if (setup_time > 255)
+		setup_time = 255;
+
+	if (setup_time <= 0)
+		setup_time = 1;
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_SDASU, setup_time);
+
+	if (hold_time > 255)
+		hold_time = 255;
+
+	if (hold_time >= 0) {
+		/*i2c hold time enable */
+		hold_time |= JZ4780_I2C_SDAHD_HDENB;
+		jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, hold_time);
+	} else {
+		/* disable hold time */
+		jz4780_i2c_writew(i2c, JZ4780_I2C_SDAHD, 0);
+	}
+
+	return 0;
+}
+
+static int jz4780_i2c_cleanup(struct jz4780_i2c *i2c)
+{
+	int ret;
+	unsigned long flags;
+	unsigned short tmp;
+
+	spin_lock_irqsave(&i2c->lock, flags);
+
+	/* can send stop now if need */
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+	tmp &= ~JZ4780_I2C_CTRL_STPHLD;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+	/* disable all interrupts first */
+	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0);
+
+	/* then clear all interrupts */
+	jz4780_i2c_readw(i2c, JZ4780_I2C_CTXABRT);
+	jz4780_i2c_readw(i2c, JZ4780_I2C_CINTR);
+
+	/* then disable the controller */
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+	tmp &= ~JZ4780_I2C_ENB_I2C;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+	udelay(10);
+	tmp |= JZ4780_I2C_ENB_I2C;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	ret = jz4780_i2c_disable(i2c);
+	if (ret)
+		dev_err(&i2c->adap.dev,
+			"unable to disable device during cleanup!\n");
+
+	if (unlikely(jz4780_i2c_readw(i2c, JZ4780_I2C_INTM)
+		     & jz4780_i2c_readw(i2c, JZ4780_I2C_INTST)))
+		dev_err(&i2c->adap.dev,
+			"device has interrupts after a complete cleanup!\n");
+
+	return ret;
+}
+
+static int jz4780_i2c_prepare(struct jz4780_i2c *i2c)
+{
+	jz4780_i2c_set_speed(i2c);
+	return jz4780_i2c_enable(i2c);
+}
+
+static void jz4780_i2c_send_rcmd(struct jz4780_i2c *i2c, int cmd_count)
+{
+	int i;
+
+	for (i = 0; i < cmd_count; i++)
+		jz4780_i2c_writew(i2c, JZ4780_I2C_DC, JZ4780_I2C_DC_READ);
+}
+
+static void jz4780_i2c_trans_done(struct jz4780_i2c *i2c)
+{
+	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0);
+	complete(&i2c->trans_waitq);
+}
+
+static irqreturn_t jz4780_i2c_irq(int irqno, void *dev_id)
+{
+	unsigned short tmp;
+	unsigned short intst;
+	unsigned short intmsk;
+	struct jz4780_i2c *i2c = dev_id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i2c->lock, flags);
+	intmsk = jz4780_i2c_readw(i2c, JZ4780_I2C_INTM);
+	intst = jz4780_i2c_readw(i2c, JZ4780_I2C_INTST);
+
+	intst &= intmsk;
+
+	if (intst & JZ4780_I2C_INTST_TXABT) {
+		jz4780_i2c_trans_done(i2c);
+		goto done;
+	}
+
+	if (intst & JZ4780_I2C_INTST_RXOF) {
+		dev_dbg(&i2c->adap.dev, "received fifo overflow!\n");
+		jz4780_i2c_trans_done(i2c);
+		goto done;
+	}
+
+	/*
+	 * When reading, always drain RX FIFO before we send more Read
+	 * Commands to avoid fifo overrun
+	 */
+	if (i2c->is_write == 0) {
+		int rd_left;
+
+		while ((jz4780_i2c_readw(i2c, JZ4780_I2C_STA)
+				  & JZ4780_I2C_STA_RFNE)) {
+			*(i2c->rbuf++) = jz4780_i2c_readw(i2c, JZ4780_I2C_DC)
+					 & 0xff;
+			i2c->rd_data_xfered++;
+			if (i2c->rd_data_xfered == i2c->rd_total_len) {
+				jz4780_i2c_trans_done(i2c);
+				goto done;
+			}
+		}
+
+		rd_left = i2c->rd_total_len - i2c->rd_data_xfered;
+
+		if (rd_left <= JZ4780_I2C_FIFO_LEN)
+			jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, rd_left - 1);
+	}
+
+	if (intst & JZ4780_I2C_INTST_TXEMP) {
+		if (i2c->is_write == 0) {
+			int cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered;
+			int max_send = (JZ4780_I2C_FIFO_LEN - 1)
+					 - (i2c->rd_cmd_xfered
+					 - i2c->rd_data_xfered);
+			int cmd_to_send = min(cmd_left, max_send);
+
+			if (i2c->rd_cmd_xfered != 0)
+				cmd_to_send = min(cmd_to_send,
+						  JZ4780_I2C_FIFO_LEN
+						  - TX_LEVEL - 1);
+
+			if (cmd_to_send) {
+				jz4780_i2c_send_rcmd(i2c, cmd_to_send);
+				i2c->rd_cmd_xfered += cmd_to_send;
+			}
+
+			cmd_left = i2c->rd_total_len - i2c->rd_cmd_xfered;
+			if (cmd_left == 0) {
+				intmsk = jz4780_i2c_readw(i2c, JZ4780_I2C_INTM);
+				intmsk &= ~JZ4780_I2C_INTM_MTXEMP;
+				jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, intmsk);
+
+				tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+				tmp &= ~JZ4780_I2C_CTRL_STPHLD;
+				jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+			}
+		} else {
+			unsigned short data;
+			unsigned short i2c_sta;
+
+			i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
+
+			while ((i2c_sta & JZ4780_I2C_STA_TFNF) &&
+			       (i2c->wt_len > 0)) {
+				i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
+				data = *i2c->wbuf;
+				data &= ~JZ4780_I2C_DC_READ;
+				jz4780_i2c_writew(i2c, JZ4780_I2C_DC,
+						  data);
+				i2c->wbuf++;
+				i2c->wt_len--;
+			}
+
+			if (i2c->wt_len == 0) {
+				if (!i2c->stop_hold) {
+					tmp = jz4780_i2c_readw(i2c,
+							       JZ4780_I2C_CTRL);
+					tmp &= ~JZ4780_I2C_CTRL_STPHLD;
+					jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL,
+							  tmp);
+				}
+
+				jz4780_i2c_trans_done(i2c);
+				goto done;
+			}
+		}
+	}
+
+done:
+	spin_unlock_irqrestore(&i2c->lock, flags);
+	return IRQ_HANDLED;
+}
+
+static void jz4780_i2c_txabrt(struct jz4780_i2c *i2c, int src)
+{
+	int i;
+
+	dev_err(&i2c->adap.dev, "txabrt: 0x%08x\n", src);
+	dev_err(&i2c->adap.dev, "device addr=%x\n",
+		jz4780_i2c_readw(i2c, JZ4780_I2C_TAR));
+	dev_err(&i2c->adap.dev, "send cmd count:%d  %d\n",
+		i2c->cmd, i2c->cmd_buf[i2c->cmd]);
+	dev_err(&i2c->adap.dev, "receive data count:%d  %d\n",
+		i2c->cmd, i2c->data_buf[i2c->cmd]);
+
+	for (i = 0; i < 16; i++) {
+		if (src & BIT(i))
+			dev_dbg(&i2c->adap.dev, "I2C TXABRT[%d]=%s\n",
+				i, jz4780_i2c_abrt_src[i]);
+	}
+}
+
+static inline int jz4780_i2c_xfer_read(struct jz4780_i2c *i2c,
+				       unsigned char *buf, int len, int cnt,
+				       int idx)
+{
+	int ret = 0;
+	long timeout;
+	int wait_time = JZ4780_I2C_TIMEOUT * (len + 5);
+	unsigned short tmp;
+	unsigned long flags;
+
+	memset(buf, 0, len);
+
+	spin_lock_irqsave(&i2c->lock, flags);
+
+	i2c->stop_hold = 0;
+	i2c->is_write = 0;
+	i2c->rbuf = buf;
+	i2c->rd_total_len = len;
+	i2c->rd_data_xfered = 0;
+	i2c->rd_cmd_xfered = 0;
+
+	if (len <= JZ4780_I2C_FIFO_LEN)
+		jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, len - 1);
+	else
+		jz4780_i2c_writew(i2c, JZ4780_I2C_RXTL, RX_LEVEL);
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL);
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM,
+			  JZ4780_I2C_INTM_MRXFL | JZ4780_I2C_INTM_MTXEMP
+			  | JZ4780_I2C_INTM_MTXABT | JZ4780_I2C_INTM_MRXOF);
+
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+	tmp |= JZ4780_I2C_CTRL_STPHLD;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	timeout = wait_for_completion_timeout(&i2c->trans_waitq,
+					      msecs_to_jiffies(wait_time));
+
+	if (!timeout) {
+		dev_err(&i2c->adap.dev, "irq read timeout\n");
+		dev_dbg(&i2c->adap.dev, "send cmd count:%d  %d\n",
+			i2c->cmd, i2c->cmd_buf[i2c->cmd]);
+		dev_dbg(&i2c->adap.dev, "receive data count:%d  %d\n",
+			i2c->cmd, i2c->data_buf[i2c->cmd]);
+		ret = -EIO;
+	}
+
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_TXABRT);
+	if (tmp) {
+		jz4780_i2c_txabrt(i2c, tmp);
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static inline int jz4780_i2c_xfer_write(struct jz4780_i2c *i2c,
+					unsigned char *buf, int len,
+					int cnt, int idx)
+{
+	int ret = 0;
+	int wait_time = JZ4780_I2C_TIMEOUT * (len + 5);
+	long timeout;
+	unsigned short tmp;
+	unsigned long flags;
+
+	spin_lock_irqsave(&i2c->lock, flags);
+
+	if (idx < (cnt - 1))
+		i2c->stop_hold = 1;
+	else
+		i2c->stop_hold = 0;
+
+	i2c->is_write = 1;
+	i2c->wbuf = buf;
+	i2c->wt_len = len;
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_TXTL, TX_LEVEL);
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, JZ4780_I2C_INTM_MTXEMP
+					| JZ4780_I2C_INTM_MTXABT);
+
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+	tmp |= JZ4780_I2C_CTRL_STPHLD;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+	spin_unlock_irqrestore(&i2c->lock, flags);
+
+	timeout = wait_for_completion_timeout(&i2c->trans_waitq,
+					      msecs_to_jiffies(wait_time));
+	if (timeout && !i2c->stop_hold) {
+		unsigned short i2c_sta;
+		int write_in_process;
+
+		timeout = JZ4780_I2C_TIMEOUT * 100;
+		for (; timeout > 0; timeout--) {
+			i2c_sta = jz4780_i2c_readw(i2c, JZ4780_I2C_STA);
+
+			write_in_process = (i2c_sta & JZ4780_I2C_STA_MSTACT) ||
+				!(i2c_sta & JZ4780_I2C_STA_TFE);
+			if (!write_in_process)
+				break;
+			udelay(10);
+		}
+	}
+
+	if (!timeout) {
+		dev_err(&i2c->adap.dev, "write wait timeout\n");
+		ret = -EIO;
+	}
+
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_TXABRT);
+	if (tmp) {
+		jz4780_i2c_txabrt(i2c, tmp);
+		ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int jz4780_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
+			   int count)
+{
+	int i = -EIO;
+	int ret = 0;
+	struct jz4780_i2c *i2c = adap->algo_data;
+
+	ret = jz4780_i2c_prepare(i2c);
+	if (ret) {
+		dev_err(&i2c->adap.dev, "I2C prepare failed\n");
+		goto out;
+	}
+
+	if (msg->addr != jz4780_i2c_readw(i2c, JZ4780_I2C_TAR)) {
+		ret = jz4780_i2c_set_target(i2c, msg->addr);
+		if (ret)
+			goto out;
+	}
+	for (i = 0; i < count; i++, msg++) {
+		if (msg->flags & I2C_M_RD)
+			ret = jz4780_i2c_xfer_read(i2c, msg->buf, msg->len,
+						   count, i);
+		else
+			ret = jz4780_i2c_xfer_write(i2c, msg->buf, msg->len,
+						    count, i);
+
+		if (ret)
+			goto out;
+	}
+
+	ret = i;
+
+out:
+	jz4780_i2c_cleanup(i2c);
+	return ret;
+}
+
+static u32 jz4780_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm jz4780_i2c_algorithm = {
+	.master_xfer	= jz4780_i2c_xfer,
+	.functionality	= jz4780_i2c_functionality,
+};
+
+static const struct of_device_id jz4780_i2c_of_matches[] = {
+	{ .compatible = "ingenic,jz4780-i2c", },
+	{ /* sentinel */ }
+};
+
+static int jz4780_i2c_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	unsigned int clk_freq = 0;
+	unsigned short tmp;
+	struct resource *r;
+	struct jz4780_i2c *i2c;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(struct jz4780_i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	i2c->adap.owner		= THIS_MODULE;
+	i2c->adap.algo		= &jz4780_i2c_algorithm;
+	i2c->adap.algo_data	= i2c;
+	i2c->adap.retries	= 5;
+	i2c->adap.dev.parent	= &pdev->dev;
+	i2c->adap.dev.of_node	= pdev->dev.of_node;
+	sprintf(i2c->adap.name, "%s", pdev->name);
+
+	init_completion(&i2c->trans_waitq);
+	spin_lock_init(&i2c->lock);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->iomem = devm_ioremap_resource(&pdev->dev, r);
+	if (IS_ERR(i2c->iomem))
+		return PTR_ERR(i2c->iomem);
+
+	platform_set_drvdata(pdev, i2c);
+
+	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(i2c->clk))
+		return PTR_ERR(i2c->clk);
+
+	clk_prepare_enable(i2c->clk);
+
+	if (of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+				 &clk_freq)) {
+		dev_err(&pdev->dev, "clock-frequency not specified in DT");
+		return clk_freq;
+	}
+
+	i2c->speed = clk_freq / 1000;
+	jz4780_i2c_set_speed(i2c);
+
+	dev_info(&pdev->dev, "Bus frequency is %d KHz\n", i2c->speed);
+
+	tmp = jz4780_i2c_readw(i2c, JZ4780_I2C_CTRL);
+	tmp &= ~JZ4780_I2C_CTRL_STPHLD;
+	jz4780_i2c_writew(i2c, JZ4780_I2C_CTRL, tmp);
+
+	jz4780_i2c_writew(i2c, JZ4780_I2C_INTM, 0x0);
+
+	i2c->cmd = 0;
+	memset(i2c->cmd_buf, 0, BUFSIZE);
+	memset(i2c->data_buf, 0, BUFSIZE);
+
+	i2c->irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0,
+			       dev_name(&pdev->dev), i2c);
+	if (ret) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to add bus\n");
+		goto err;
+	}
+
+	return 0;
+
+err:
+	clk_disable_unprepare(i2c->clk);
+	return ret;
+}
+
+static int jz4780_i2c_remove(struct platform_device *pdev)
+{
+	struct jz4780_i2c *i2c = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(i2c->clk);
+	i2c_del_adapter(&i2c->adap);
+	return 0;
+}
+
+static struct platform_driver jz4780_i2c_driver = {
+	.probe		= jz4780_i2c_probe,
+	.remove		= jz4780_i2c_remove,
+	.driver		= {
+		.name	= "jz4780-i2c",
+		.of_match_table = of_match_ptr(jz4780_i2c_of_matches),
+	},
+};
+
+module_platform_driver(jz4780_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("ztyan<ztyan@ingenic.cn>");
+MODULE_DESCRIPTION("i2c driver for JZ4780 SoCs");