Commit bac27bd9 authored by Yaniv Rosner's avatar Yaniv Rosner Committed by David S. Miller

bnx2x: Fix BCM84833 settings

Fix BCM84833 register settings.
Signed-off-by: default avatarYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 27d02432
......@@ -6099,111 +6099,106 @@ static void bnx2x_8727_link_reset(struct bnx2x_phy *phy,
static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy,
struct link_params *params)
{
u16 val, fw_ver1, fw_ver2, cnt, adj;
u16 val, fw_ver1, fw_ver2, cnt;
u8 port;
struct bnx2x *bp = params->bp;
adj = 0;
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
adj = -1;
port = params->port;
/* For the 32 bits registers in 848xx, access via MDIO2ARM interface.*/
/* (1) set register 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819 + adj, 0x0014);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A + adj, 0xc200);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81B + adj, 0x0000);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81C + adj, 0x0300);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817 + adj, 0x0009);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0014);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81B, 0x0000);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81C, 0x0300);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x0009);
for (cnt = 0; cnt < 100; cnt++) {
bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818 + adj, &val);
bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val);
if (val & 1)
break;
udelay(5);
}
if (cnt == 100) {
DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(1)\n");
bnx2x_save_spirom_version(bp, params->port, 0,
bnx2x_save_spirom_version(bp, port, 0,
phy->ver_addr);
return;
}
/* 2) read register 0xc200_0000 (SPI_FW_STATUS) */
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819 + adj, 0x0000);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A + adj, 0xc200);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817 + adj, 0x000A);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0000);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200);
bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x000A);
for (cnt = 0; cnt < 100; cnt++) {
bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818 + adj, &val);
bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val);
if (val & 1)
break;
udelay(5);
}
if (cnt == 100) {
DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(2)\n");
bnx2x_save_spirom_version(bp, params->port, 0,
bnx2x_save_spirom_version(bp, port, 0,
phy->ver_addr);
return;
}
/* lower 16 bits of the register SPI_FW_STATUS */
bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B + adj, &fw_ver1);
bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B, &fw_ver1);
/* upper 16 bits of register SPI_FW_STATUS */
bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C + adj, &fw_ver2);
bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C, &fw_ver2);
bnx2x_save_spirom_version(bp, params->port, (fw_ver2<<16) | fw_ver1,
bnx2x_save_spirom_version(bp, port, (fw_ver2<<16) | fw_ver1,
phy->ver_addr);
}
static void bnx2x_848xx_set_led(struct bnx2x *bp,
struct bnx2x_phy *phy)
{
u16 val, adj;
adj = 0;
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
adj = -1;
u16 val;
/* PHYC_CTL_LED_CTL */
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8481_LINK_SIGNAL + adj, &val);
MDIO_PMA_REG_8481_LINK_SIGNAL, &val);
val &= 0xFE00;
val |= 0x0092;
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8481_LINK_SIGNAL + adj, val);
MDIO_PMA_REG_8481_LINK_SIGNAL, val);
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8481_LED1_MASK + adj,
MDIO_PMA_REG_8481_LED1_MASK,
0x80);
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8481_LED2_MASK + adj,
MDIO_PMA_REG_8481_LED2_MASK,
0x18);
/* Select activity source by Tx and Rx, as suggested by PHY AE */
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8481_LED3_MASK + adj,
MDIO_PMA_REG_8481_LED3_MASK,
0x0006);
/* Select the closest activity blink rate to that in 10/100/1000 */
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8481_LED3_BLINK + adj,
MDIO_PMA_REG_8481_LED3_BLINK,
0);
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_84823_CTL_LED_CTL_1 + adj, &val);
MDIO_PMA_REG_84823_CTL_LED_CTL_1, &val);
val |= MDIO_PMA_REG_84823_LED3_STRETCH_EN; /* stretch_en for LED3*/
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_84823_CTL_LED_CTL_1 + adj, val);
MDIO_PMA_REG_84823_CTL_LED_CTL_1, val);
/* 'Interrupt Mask' */
bnx2x_cl45_write(bp, phy,
......@@ -6217,6 +6212,13 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
{
struct bnx2x *bp = params->bp;
u16 autoneg_val, an_1000_val, an_10_100_val;
u16 tmp_req_line_speed;
tmp_req_line_speed = phy->req_line_speed;
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
if (phy->req_line_speed == SPEED_10000)
phy->req_line_speed = SPEED_AUTO_NEG;
/*
* This phy uses the NIG latch mechanism since link indication
* arrives through its LED4 and not via its LASI signal, so we
......@@ -6336,6 +6338,8 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy,
/* Save spirom version */
bnx2x_save_848xx_spirom_version(phy, params);
phy->req_line_speed = tmp_req_line_speed;
return 0;
}
......@@ -6356,33 +6360,109 @@ static int bnx2x_8481_config_init(struct bnx2x_phy *phy,
return bnx2x_848xx_cmn_config_init(phy, params, vars);
}
#define PHY84833_HDSHK_WAIT 300
static int bnx2x_84833_pair_swap_cfg(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars)
{
u32 idx;
u16 val;
u16 data = 0x01b1;
struct bnx2x *bp = params->bp;
/* Do pair swap */
/* Write CMD_OPEN_OVERRIDE to STATUS reg */
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
MDIO_84833_TOP_CFG_SCRATCH_REG2,
PHY84833_CMD_OPEN_OVERRIDE);
for (idx = 0; idx < PHY84833_HDSHK_WAIT; idx++) {
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
MDIO_84833_TOP_CFG_SCRATCH_REG2, &val);
if (val == PHY84833_CMD_OPEN_FOR_CMDS)
break;
msleep(1);
}
if (idx >= PHY84833_HDSHK_WAIT) {
DP(NETIF_MSG_LINK, "Pairswap: FW not ready.\n");
return -EINVAL;
}
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
MDIO_84833_TOP_CFG_SCRATCH_REG4,
data);
/* Issue pair swap command */
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
MDIO_84833_TOP_CFG_SCRATCH_REG0,
PHY84833_DIAG_CMD_PAIR_SWAP_CHANGE);
for (idx = 0; idx < PHY84833_HDSHK_WAIT; idx++) {
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
MDIO_84833_TOP_CFG_SCRATCH_REG2, &val);
if ((val == PHY84833_CMD_COMPLETE_PASS) ||
(val == PHY84833_CMD_COMPLETE_ERROR))
break;
msleep(1);
}
if ((idx >= PHY84833_HDSHK_WAIT) ||
(val == PHY84833_CMD_COMPLETE_ERROR)) {
DP(NETIF_MSG_LINK, "Pairswap: override failed.\n");
return -EINVAL;
}
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
MDIO_84833_TOP_CFG_SCRATCH_REG2,
PHY84833_CMD_CLEAR_COMPLETE);
DP(NETIF_MSG_LINK, "Pairswap OK, val=0x%x\n", data);
return 0;
}
static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
u8 port, initialize = 1;
u16 val, adj;
u16 val;
u16 temp;
u32 actual_phy_selection, cms_enable;
int rc = 0;
/* This is just for MDIO_CTL_REG_84823_MEDIA register. */
adj = 0;
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
adj = 3;
msleep(1);
if (CHIP_IS_E2(bp))
if (!(CHIP_IS_E1(bp)))
port = BP_PATH(bp);
else
port = params->port;
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823) {
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
MISC_REGISTERS_GPIO_OUTPUT_HIGH,
port);
} else {
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_CTRL, 0x8000);
}
bnx2x_wait_reset_complete(bp, phy, params);
/* Wait for GPHY to come out of reset */
msleep(50);
/* Bring PHY out of super isolate mode */
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) {
bnx2x_cl45_read(bp, phy,
MDIO_CTL_DEVAD,
MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val);
val &= ~MDIO_84833_SUPER_ISOLATE;
bnx2x_cl45_write(bp, phy,
MDIO_CTL_DEVAD,
MDIO_84833_TOP_CFG_XGPHY_STRAP1, val);
bnx2x_wait_reset_complete(bp, phy, params);
}
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
bnx2x_84833_pair_swap_cfg(phy, params, vars);
/*
* BCM84823 requires that XGXS links up first @ 10G for normal behavior
*/
......@@ -6395,7 +6475,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
/* Set dual-media configuration according to configuration */
bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD,
MDIO_CTL_REG_84823_MEDIA + adj, &val);
MDIO_CTL_REG_84823_MEDIA, &val);
val &= ~(MDIO_CTL_REG_84823_MEDIA_MAC_MASK |
MDIO_CTL_REG_84823_MEDIA_LINE_MASK |
MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN |
......@@ -6428,7 +6508,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy,
val |= MDIO_CTL_REG_84823_MEDIA_FIBER_1G;
bnx2x_cl45_write(bp, phy, MDIO_CTL_DEVAD,
MDIO_CTL_REG_84823_MEDIA + adj, val);
MDIO_CTL_REG_84823_MEDIA, val);
DP(NETIF_MSG_LINK, "Multi_phy config = 0x%x, Media control = 0x%x\n",
params->multi_phy_config, val);
......@@ -6459,20 +6539,16 @@ static u8 bnx2x_848xx_read_status(struct bnx2x_phy *phy,
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
u16 val, val1, val2, adj;
u16 val, val1, val2;
u8 link_up = 0;
/* Reg offset adjustment for 84833 */
adj = 0;
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833)
adj = -1;
/* Check 10G-BaseT link status */
/* Check PMD signal ok */
bnx2x_cl45_read(bp, phy,
MDIO_AN_DEVAD, 0xFFFA, &val1);
bnx2x_cl45_read(bp, phy,
MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL + adj,
MDIO_PMA_DEVAD, MDIO_PMA_REG_8481_PMD_SIGNAL,
&val2);
DP(NETIF_MSG_LINK, "BCM848xx: PMD_SIGNAL 1.a811 = 0x%x\n", val2);
......@@ -6577,13 +6653,21 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy,
{
struct bnx2x *bp = params->bp;
u8 port;
if (CHIP_IS_E2(bp))
if (!(CHIP_IS_E1(bp)))
port = BP_PATH(bp);
else
port = params->port;
if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823) {
bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3,
MISC_REGISTERS_GPIO_OUTPUT_LOW,
port);
} else {
bnx2x_cl45_write(bp, phy,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_CTRL, 0x800);
}
}
static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy,
......@@ -6591,11 +6675,17 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy,
{
struct bnx2x *bp = params->bp;
u16 val;
u8 port;
if (!(CHIP_IS_E1(bp)))
port = BP_PATH(bp);
else
port = params->port;
switch (mode) {
case LED_MODE_OFF:
DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OFF\n", params->port);
DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OFF\n", port);
if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
SHARED_HW_CFG_LED_EXTPHY1) {
......@@ -6631,7 +6721,7 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy,
case LED_MODE_FRONT_PANEL_OFF:
DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE FRONT PANEL OFF\n",
params->port);
port);
if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
SHARED_HW_CFG_LED_EXTPHY1) {
......@@ -6666,7 +6756,7 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy,
break;
case LED_MODE_ON:
DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE ON\n", params->port);
DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE ON\n", port);
if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
SHARED_HW_CFG_LED_EXTPHY1) {
......@@ -6713,7 +6803,7 @@ static void bnx2x_848xx_set_link_led(struct bnx2x_phy *phy,
case LED_MODE_OPER:
DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OPER\n", params->port);
DP(NETIF_MSG_LINK, "Port 0x%x: LED MODE OPER\n", port);
if ((params->hw_led_mode << SHARED_HW_CFG_LED_MODE_SHIFT) ==
SHARED_HW_CFG_LED_EXTPHY1) {
......
......@@ -6202,6 +6202,29 @@ Theotherbitsarereservedandshouldbezero*/
#define MDIO_PMA_REG_84823_CTL_LED_CTL_1 0xa8e3
#define MDIO_PMA_REG_84823_LED3_STRETCH_EN 0x0080
/* BCM84833 only */
#define MDIO_84833_TOP_CFG_XGPHY_STRAP1 0x401a
#define MDIO_84833_SUPER_ISOLATE 0x8000
/* These are mailbox register set used by 84833. */
#define MDIO_84833_TOP_CFG_SCRATCH_REG0 0x4005
#define MDIO_84833_TOP_CFG_SCRATCH_REG1 0x4006
#define MDIO_84833_TOP_CFG_SCRATCH_REG2 0x4007
#define MDIO_84833_TOP_CFG_SCRATCH_REG3 0x4008
#define MDIO_84833_TOP_CFG_SCRATCH_REG4 0x4009
/* Mailbox command set used by 84833. */
#define PHY84833_DIAG_CMD_PAIR_SWAP_CHANGE 0x2
/* Mailbox status set used by 84833. */
#define PHY84833_CMD_RECEIVED 0x0001
#define PHY84833_CMD_IN_PROGRESS 0x0002
#define PHY84833_CMD_COMPLETE_PASS 0x0004
#define PHY84833_CMD_COMPLETE_ERROR 0x0008
#define PHY84833_CMD_OPEN_FOR_CMDS 0x0010
#define PHY84833_CMD_SYSTEM_BOOT 0x0020
#define PHY84833_CMD_NOT_OPEN_FOR_CMDS 0x0040
#define PHY84833_CMD_CLEAR_COMPLETE 0x0080
#define PHY84833_CMD_OPEN_OVERRIDE 0xa5a5
#define IGU_FUNC_BASE 0x0400
#define IGU_ADDR_MSIX 0x0000
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment