Merge tag 'mfd-next-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for RAVE Supervisory Processor

  Moved drivers:
   - Move Realtek Card Reader Driver to Misc

  New Device Support:
   - Add support for Pinctrl to axp20x

  New Functionality:
   - Add resume support to atmel-flexcom

  Fix-ups:
   - Split MFD (mfd) and userspace handlers (platform) in cros_ec
   - Fix trivial (whitespace, spelling) issue(s) in pcf50633-core
   - Clean-up error handling in ab8500-debugfs
   - General tidying up in tmio_core
   - Kconfig fix-ups for qcom-pm8xxx
   - Licensing changes (SPDX) to stm32-lptimer, stm32-timers
   - Device Tree fixups in mc13xxx
   - Simplify/remove unused code in cros_ec_spi, axp20x, ti_am335x_tscadc,
     kempld-core, intel_soc_pmic_core.c, ab8500-debugfs"

* tag 'mfd-next-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
  mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Apollo Lake
  mfd: axp20x: Mark axp288 CHRG_BAK_CTRL register volatile
  mfd: ab8500: Introduce DEFINE_SHOW_ATTRIBUTE() macro
  atmel_flexcom: Support resuming after a chip reset
  mfd: Remove duplicate includes
  dt-bindings: mfd: mc13xxx: Add the unit address to sysled
  mfd: stm32: Adopt SPDX identifier
  mfd: axp20x: Add pinctrl cell for AXP813
  mfd: pm8xxx: Make elegible for COMPILE_TEST
  mfd: kempld-core: Use resource_size function on resource object
  mfd: tmio: Move register macros to tmio_core.c
  mfd: cros ec: spi: Simplify delay handling between SPI messages
  mfd: palmas: Assign the right powerhold mask for tps65917
  mfd: ab8500-debugfs: Use common error handling code in ab8500_print_modem_registers()
  mfd: ti_am335x_tscadc: Remove redundant assignment to node
  mfd: pcf50633: Fix spelling mistake: 'Falied' -> 'Failed'
  dt-bindings: watchdog: Add bindings for RAVE SP watchdog driver
  watchdog: Add RAVE SP watchdog driver
  mfd: Add driver for RAVE Supervisory Processor
  serdev: Introduce devm_serdev_device_open()
  ...

Documentation/devicetree/bindings/mfd/mc13xxx.txt

@@ -130,7 +130,7 @@ ecspi@70010000 { /* ECSPI1 */
 			#size-cells = <0>;
 			led-control = <0x000 0x000 0x0e0 0x000>;
 
-			sysled {
+			sysled@3 {
 				reg = <3>;
 				label = "system:red:live";
 				linux,default-trigger = "heartbeat";

Documentation/devicetree/bindings/watchdog/zii,rave-sp-wdt.txt

+Zodiac Inflight Innovations RAVE Supervisory Processor Watchdog Bindings
+
+RAVE SP watchdog device is a "MFD cell" device corresponding to
+watchdog functionality of RAVE Supervisory Processor. It is expected
+that its Device Tree node is specified as a child of the node
+corresponding to the parent RAVE SP device (as documented in
+Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
+
+Required properties:
+
+- compatible: Depending on wire protocol implemented by RAVE SP
+  firmware, should be one of:
+	- "zii,rave-sp-watchdog"
+	- "zii,rave-sp-watchdog-legacy"
+
+Optional properties:
+
+- wdt-timeout:	Two byte nvmem cell specified as per
+		Documentation/devicetree/bindings/nvmem/nvmem.txt
+
+Example:
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu1";
+		current-speed = <38400>;
+
+		eeprom {
+			wdt_timeout: wdt-timeout@8E {
+				reg = <0x8E 2>;
+			};
+		};
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+			nvmem-cells = <&wdt_timeout>;
+			nvmem-cell-names = "wdt-timeout";
+		};
+	}
+

Documentation/driver-model/devres.txt

@@ -384,6 +384,9 @@ RESET
   devm_reset_control_get()
   devm_reset_controller_register()
 
+SERDEV
+  devm_serdev_device_open()
+
 SLAVE DMA ENGINE
   devm_acpi_dma_controller_register()
 

drivers/extcon/extcon-axp288.c

@@ -24,8 +24,6 @@
 #include <linux/notifier.h>
 #include <linux/extcon-provider.h>
 #include <linux/regmap.h>
-#include <linux/gpio.h>
-#include <linux/gpio/consumer.h>
 #include <linux/mfd/axp20x.h>
 
 /* Power source status register */
@@ -79,11 +77,6 @@ enum axp288_extcon_reg {
 	AXP288_BC_DET_STAT_REG		= 0x2f,
 };
 
-enum axp288_mux_select {
-	EXTCON_GPIO_MUX_SEL_PMIC = 0,
-	EXTCON_GPIO_MUX_SEL_SOC,
-};
-
 enum axp288_extcon_irq {
 	VBUS_FALLING_IRQ = 0,
 	VBUS_RISING_IRQ,
@@ -104,10 +97,8 @@ struct axp288_extcon_info {
 	struct device *dev;
 	struct regmap *regmap;
 	struct regmap_irq_chip_data *regmap_irqc;
-	struct gpio_desc *gpio_mux_cntl;
 	int irq[EXTCON_IRQ_END];
 	struct extcon_dev *edev;
-	struct notifier_block extcon_nb;
 	unsigned int previous_cable;
 };
 
@@ -197,15 +188,6 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
 	}
 
 no_vbus:
-	/*
-	 * If VBUS is absent Connect D+/D- lines to PMIC for BC
-	 * detection. Else connect them to SOC for USB communication.
-	 */
-	if (info->gpio_mux_cntl)
-		gpiod_set_value(info->gpio_mux_cntl,
-			vbus_attach ? EXTCON_GPIO_MUX_SEL_SOC
-					: EXTCON_GPIO_MUX_SEL_PMIC);
-
 	extcon_set_state_sync(info->edev, info->previous_cable, false);
 	if (info->previous_cable == EXTCON_CHG_USB_SDP)
 		extcon_set_state_sync(info->edev, EXTCON_USB, false);
@@ -253,8 +235,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 {
 	struct axp288_extcon_info *info;
 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
-	struct axp288_extcon_pdata *pdata = pdev->dev.platform_data;
-	int ret, i, pirq, gpio;
+	int ret, i, pirq;
 
 	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
 	if (!info)
@@ -264,8 +245,6 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 	info->regmap = axp20x->regmap;
 	info->regmap_irqc = axp20x->regmap_irqc;
 	info->previous_cable = EXTCON_NONE;
-	if (pdata)
-		info->gpio_mux_cntl = pdata->gpio_mux_cntl;
 
 	platform_set_drvdata(pdev, info);
 
@@ -286,21 +265,11 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	/* Set up gpio control for USB Mux */
-	if (info->gpio_mux_cntl) {
-		gpio = desc_to_gpio(info->gpio_mux_cntl);
-		ret = devm_gpio_request(&pdev->dev, gpio, "USB_MUX");
-		if (ret < 0) {
-			dev_err(&pdev->dev,
-				"failed to request the gpio=%d\n", gpio);
-			return ret;
-		}
-		gpiod_direction_output(info->gpio_mux_cntl,
-						EXTCON_GPIO_MUX_SEL_PMIC);
-	}
-
 	for (i = 0; i < EXTCON_IRQ_END; i++) {
 		pirq = platform_get_irq(pdev, i);
+		if (pirq < 0)
+			return pirq;
+
 		info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
 		if (info->irq[i] < 0) {
 			dev_err(&pdev->dev,

drivers/extcon/extcon-usbc-cros-ec.c

@@ -34,16 +34,26 @@ struct cros_ec_extcon_info {
 
 	struct notifier_block notifier;
 
+	unsigned int dr; /* data role */
+	bool pr; /* power role (true if VBUS enabled) */
 	bool dp; /* DisplayPort enabled */
 	bool mux; /* SuperSpeed (usb3) enabled */
 	unsigned int power_type;
 };
 
 static const unsigned int usb_type_c_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
 	EXTCON_DISP_DP,
 	EXTCON_NONE,
 };
 
+enum usb_data_roles {
+	DR_NONE,
+	DR_HOST,
+	DR_DEVICE,
+};
+
 /**
  * cros_ec_pd_command() - Send a command to the EC.
  * @info: pointer to struct cros_ec_extcon_info
@@ -150,6 +160,7 @@ static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info,
 	pd_control.port = info->port_id;
 	pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE;
 	pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE;
+	pd_control.swap = USB_PD_CTRL_SWAP_NONE;
 	ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1,
 				 &pd_control, sizeof(pd_control),
 				 &resp, sizeof(resp));
@@ -183,11 +194,72 @@ static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info)
 	return resp.num_ports;
 }
 
+static const char *cros_ec_usb_role_string(unsigned int role)
+{
+	return role == DR_NONE ? "DISCONNECTED" :
+		(role == DR_HOST ? "DFP" : "UFP");
+}
+
+static const char *cros_ec_usb_power_type_string(unsigned int type)
+{
+	switch (type) {
+	case USB_CHG_TYPE_NONE:
+		return "USB_CHG_TYPE_NONE";
+	case USB_CHG_TYPE_PD:
+		return "USB_CHG_TYPE_PD";
+	case USB_CHG_TYPE_PROPRIETARY:
+		return "USB_CHG_TYPE_PROPRIETARY";
+	case USB_CHG_TYPE_C:
+		return "USB_CHG_TYPE_C";
+	case USB_CHG_TYPE_BC12_DCP:
+		return "USB_CHG_TYPE_BC12_DCP";
+	case USB_CHG_TYPE_BC12_CDP:
+		return "USB_CHG_TYPE_BC12_CDP";
+	case USB_CHG_TYPE_BC12_SDP:
+		return "USB_CHG_TYPE_BC12_SDP";
+	case USB_CHG_TYPE_OTHER:
+		return "USB_CHG_TYPE_OTHER";
+	case USB_CHG_TYPE_VBUS:
+		return "USB_CHG_TYPE_VBUS";
+	case USB_CHG_TYPE_UNKNOWN:
+		return "USB_CHG_TYPE_UNKNOWN";
+	default:
+		return "USB_CHG_TYPE_UNKNOWN";
+	}
+}
+
+static bool cros_ec_usb_power_type_is_wall_wart(unsigned int type,
+						unsigned int role)
+{
+	switch (type) {
+	/* FIXME : Guppy, Donnettes, and other chargers will be miscategorized
+	 * because they identify with USB_CHG_TYPE_C, but we can't return true
+	 * here from that code because that breaks Suzy-Q and other kinds of
+	 * USB Type-C cables and peripherals.
+	 */
+	case USB_CHG_TYPE_PROPRIETARY:
+	case USB_CHG_TYPE_BC12_DCP:
+		return true;
+	case USB_CHG_TYPE_PD:
+	case USB_CHG_TYPE_C:
+	case USB_CHG_TYPE_BC12_CDP:
+	case USB_CHG_TYPE_BC12_SDP:
+	case USB_CHG_TYPE_OTHER:
+	case USB_CHG_TYPE_VBUS:
+	case USB_CHG_TYPE_UNKNOWN:
+	case USB_CHG_TYPE_NONE:
+	default:
+		return false;
+	}
+}
+
 static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
 				       bool force)
 {
 	struct device *dev = info->dev;
 	int role, power_type;
+	unsigned int dr = DR_NONE;
+	bool pr = false;
 	bool polarity = false;
 	bool dp = false;
 	bool mux = false;
@@ -206,9 +278,12 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
 			dev_err(dev, "failed getting role err = %d\n", role);
 			return role;
 		}
+		dev_dbg(dev, "disconnected\n");
 	} else {
 		int pd_mux_state;
 
+		dr = (role & PD_CTRL_RESP_ROLE_DATA) ? DR_HOST : DR_DEVICE;
+		pr = (role & PD_CTRL_RESP_ROLE_POWER);
 		pd_mux_state = cros_ec_usb_get_pd_mux_state(info);
 		if (pd_mux_state < 0)
 			pd_mux_state = USB_PD_MUX_USB_ENABLED;
@@ -216,20 +291,62 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
 		dp = pd_mux_state & USB_PD_MUX_DP_ENABLED;
 		mux = pd_mux_state & USB_PD_MUX_USB_ENABLED;
 		hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ;
-	}
 
-	if (force || info->dp != dp || info->mux != mux ||
-		info->power_type != power_type) {
+		dev_dbg(dev,
+			"connected role 0x%x pwr type %d dr %d pr %d pol %d mux %d dp %d hpd %d\n",
+			role, power_type, dr, pr, polarity, mux, dp, hpd);
+	}
 
+	/*
+	 * When there is no USB host (e.g. USB PD charger),
+	 * we are not really a UFP for the AP.
+	 */
+	if (dr == DR_DEVICE &&
+	    cros_ec_usb_power_type_is_wall_wart(power_type, role))
+		dr = DR_NONE;
+
+	if (force || info->dr != dr || info->pr != pr || info->dp != dp ||
+	    info->mux != mux || info->power_type != power_type) {
+		bool host_connected = false, device_connected = false;
+
+		dev_dbg(dev, "Type/Role switch! type = %s role = %s\n",
+			cros_ec_usb_power_type_string(power_type),
+			cros_ec_usb_role_string(dr));
+		info->dr = dr;
+		info->pr = pr;
 		info->dp = dp;
 		info->mux = mux;
 		info->power_type = power_type;
 
-		extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
+		if (dr == DR_DEVICE)
+			device_connected = true;
+		else if (dr == DR_HOST)
+			host_connected = true;
 
+		extcon_set_state(info->edev, EXTCON_USB, device_connected);
+		extcon_set_state(info->edev, EXTCON_USB_HOST, host_connected);
+		extcon_set_state(info->edev, EXTCON_DISP_DP, dp);
+		extcon_set_property(info->edev, EXTCON_USB,
+				    EXTCON_PROP_USB_VBUS,
+				    (union extcon_property_value)(int)pr);
+		extcon_set_property(info->edev, EXTCON_USB_HOST,
+				    EXTCON_PROP_USB_VBUS,
+				    (union extcon_property_value)(int)pr);
+		extcon_set_property(info->edev, EXTCON_USB,
+				    EXTCON_PROP_USB_TYPEC_POLARITY,
+				    (union extcon_property_value)(int)polarity);
+		extcon_set_property(info->edev, EXTCON_USB_HOST,
+				    EXTCON_PROP_USB_TYPEC_POLARITY,
+				    (union extcon_property_value)(int)polarity);
 		extcon_set_property(info->edev, EXTCON_DISP_DP,
 				    EXTCON_PROP_USB_TYPEC_POLARITY,
 				    (union extcon_property_value)(int)polarity);
+		extcon_set_property(info->edev, EXTCON_USB,
+				    EXTCON_PROP_USB_SS,
+				    (union extcon_property_value)(int)mux);
+		extcon_set_property(info->edev, EXTCON_USB_HOST,
+				    EXTCON_PROP_USB_SS,
+				    (union extcon_property_value)(int)mux);
 		extcon_set_property(info->edev, EXTCON_DISP_DP,
 				    EXTCON_PROP_USB_SS,
 				    (union extcon_property_value)(int)mux);
@@ -237,6 +354,8 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info,
 				    EXTCON_PROP_DISP_HPD,
 				    (union extcon_property_value)(int)hpd);
 
+		extcon_sync(info->edev, EXTCON_USB);
+		extcon_sync(info->edev, EXTCON_USB_HOST);
 		extcon_sync(info->edev, EXTCON_DISP_DP);
 
 	} else if (hpd) {
@@ -322,13 +441,28 @@ static int extcon_cros_ec_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	extcon_set_property_capability(info->edev, EXTCON_USB,
+				       EXTCON_PROP_USB_VBUS);
+	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+				       EXTCON_PROP_USB_VBUS);
+	extcon_set_property_capability(info->edev, EXTCON_USB,
+				       EXTCON_PROP_USB_TYPEC_POLARITY);
+	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+				       EXTCON_PROP_USB_TYPEC_POLARITY);
 	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
 				       EXTCON_PROP_USB_TYPEC_POLARITY);
+	extcon_set_property_capability(info->edev, EXTCON_USB,
+				       EXTCON_PROP_USB_SS);
+	extcon_set_property_capability(info->edev, EXTCON_USB_HOST,
+				       EXTCON_PROP_USB_SS);
 	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
 				       EXTCON_PROP_USB_SS);
 	extcon_set_property_capability(info->edev, EXTCON_DISP_DP,
 				       EXTCON_PROP_DISP_HPD);
 
+	info->dr = DR_NONE;
+	info->pr = false;
+
 	platform_set_drvdata(pdev, info);
 
 	/* Get PD events from the EC */

drivers/leds/leds-pm8058.c

@@ -106,7 +106,7 @@ static int pm8058_led_probe(struct platform_device *pdev)
 	if (!led)
 		return -ENOMEM;
 
-	led->ledtype = (u32)of_device_get_match_data(&pdev->dev);
+	led->ledtype = (u32)(unsigned long)of_device_get_match_data(&pdev->dev);
 
 	map = dev_get_regmap(pdev->dev.parent, NULL);
 	if (!map) {

drivers/memstick/host/Kconfig

@@ -45,7 +45,7 @@ config MEMSTICK_R592
 
 config MEMSTICK_REALTEK_PCI
 	tristate "Realtek PCI-E Memstick Card Interface Driver"
-	depends on MFD_RTSX_PCI
+	depends on MISC_RTSX_PCI
 	help
 	  Say Y here to include driver code to support Memstick card interface
 	  of Realtek PCI-E card reader
@@ -55,7 +55,7 @@ config MEMSTICK_REALTEK_PCI
 
 config MEMSTICK_REALTEK_USB
 	tristate "Realtek USB Memstick Card Interface Driver"
-	depends on MFD_RTSX_USB
+	depends on MISC_RTSX_USB
 	help
 	  Say Y here to include driver code to support Memstick card interface
 	  of Realtek RTS5129/39 series USB card reader

drivers/memstick/host/rtsx_pci_ms.c

@@ -24,7 +24,7 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/memstick.h>
-#include <linux/mfd/rtsx_pci.h>
+#include <linux/rtsx_pci.h>
 #include <asm/unaligned.h>
 
 struct realtek_pci_ms {

drivers/memstick/host/rtsx_usb_ms.c

@@ -25,7 +25,7 @@
 #include <linux/workqueue.h>
 #include <linux/memstick.h>
 #include <linux/kthread.h>
-#include <linux/mfd/rtsx_usb.h>
+#include <linux/rtsx_usb.h>
 #include <linux/pm_runtime.h>
 #include <linux/mutex.h>
 #include <linux/sched.h>

drivers/mfd/Kconfig

@@ -222,6 +222,16 @@ config MFD_CROS_EC_SPI
 	  response time cannot be guaranteed, we support ignoring
 	  'pre-amble' bytes before the response actually starts.
 
+config MFD_CROS_EC_CHARDEV
+        tristate "Chrome OS Embedded Controller userspace device interface"
+        depends on MFD_CROS_EC
+        select CROS_EC_CTL
+        ---help---
+          This driver adds support to talk with the ChromeOS EC from userspace.
+
+          If you have a supported Chromebook, choose Y or M here.
+          The module will be called cros_ec_dev.
+
 config MFD_ASIC3
 	bool "Compaq ASIC3"
 	depends on GPIOLIB && ARM
@@ -877,7 +887,7 @@ config UCB1400_CORE
 
 config MFD_PM8XXX
 	tristate "Qualcomm PM8xxx PMIC chips driver"
-	depends on (ARM || HEXAGON)
+	depends on (ARM || HEXAGON || COMPILE_TEST)
 	select IRQ_DOMAIN
 	select MFD_CORE
 	select REGMAP
@@ -929,17 +939,6 @@ config MFD_RDC321X
 	  southbridge which provides access to GPIOs and Watchdog using the
 	  southbridge PCI device configuration space.
 
-config MFD_RTSX_PCI
-	tristate "Realtek PCI-E card reader"
-	depends on PCI
-	select MFD_CORE
-	help
-	  This supports for Realtek PCI-Express card reader including rts5209,
-	  rts5227, rts522A, rts5229, rts5249, rts524A, rts525A, rtl8411, etc.
-	  Realtek card reader supports access to many types of memory cards,
-	  such as Memory Stick, Memory Stick Pro, Secure Digital and
-	  MultiMediaCard.
-
 config MFD_RT5033
 	tristate "Richtek RT5033 Power Management IC"
 	depends on I2C
@@ -953,16 +952,6 @@ config MFD_RT5033
 	  sub-devices like charger, fuel gauge, flash LED, current source,
 	  LDO and Buck.
 
-config MFD_RTSX_USB
-	tristate "Realtek USB card reader"
-	depends on USB
-	select MFD_CORE
-	help
-	  Select this option to get support for Realtek USB 2.0 card readers
-	  including RTS5129, RTS5139, RTS5179 and RTS5170.
-	  Realtek card reader supports access to many types of memory cards,
-	  such as Memory Stick Pro, Secure Digital and MultiMediaCard.
-
 config MFD_RC5T583
 	bool "Ricoh RC5T583 Power Management system device"
 	depends on I2C=y
@@ -1859,5 +1848,13 @@ config MFD_VEXPRESS_SYSREG
 	  System Registers are the platform configuration block
 	  on the ARM Ltd. Versatile Express board.
 
+config RAVE_SP_CORE
+	tristate "RAVE SP MCU core driver"
+	depends on SERIAL_DEV_BUS
+	select CRC_CCITT
+	help
+	  Select this to get support for the Supervisory Processor
+	  device found on several devices in RAVE line of hardware.
+
 endmenu
 endif

drivers/mfd/Makefile

@@ -17,12 +17,9 @@ cros_ec_core-$(CONFIG_ACPI)	+= cros_ec_acpi_gpe.o
 obj-$(CONFIG_MFD_CROS_EC)	+= cros_ec_core.o
 obj-$(CONFIG_MFD_CROS_EC_I2C)	+= cros_ec_i2c.o
 obj-$(CONFIG_MFD_CROS_EC_SPI)	+= cros_ec_spi.o
+obj-$(CONFIG_MFD_CROS_EC_CHARDEV) += cros_ec_dev.o
 obj-$(CONFIG_MFD_EXYNOS_LPASS)	+= exynos-lpass.o
 
-rtsx_pci-objs			:= rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
-obj-$(CONFIG_MFD_RTSX_PCI)	+= rtsx_pci.o
-obj-$(CONFIG_MFD_RTSX_USB)	+= rtsx_usb.o
-
 obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
 obj-$(CONFIG_HTC_I2CPLD)	+= htc-i2cpld.o
 
@@ -230,3 +227,5 @@ obj-$(CONFIG_MFD_STM32_LPTIMER)	+= stm32-lptimer.o
 obj-$(CONFIG_MFD_STM32_TIMERS) 	+= stm32-timers.o
 obj-$(CONFIG_MFD_MXS_LRADC)     += mxs-lradc.o
 obj-$(CONFIG_MFD_SC27XX_PMIC)	+= sprd-sc27xx-spi.o
+obj-$(CONFIG_RAVE_SP_CORE)	+= rave-sp.o
+

drivers/mfd/atmel-flexcom.c

@@ -39,34 +39,43 @@
 #define FLEX_MR_OPMODE(opmode)	(((opmode) << FLEX_MR_OPMODE_OFFSET) &	\
 				 FLEX_MR_OPMODE_MASK)
 
+struct atmel_flexcom {
+	void __iomem *base;
+	u32 opmode;
+	struct clk *clk;
+};
 
 static int atmel_flexcom_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
-	struct clk *clk;
 	struct resource *res;
-	void __iomem *base;
-	u32 opmode;
+	struct atmel_flexcom *ddata;
 	int err;
 
-	err = of_property_read_u32(np, "atmel,flexcom-mode", &opmode);
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	err = of_property_read_u32(np, "atmel,flexcom-mode", &ddata->opmode);
 	if (err)
 		return err;
 
-	if (opmode < ATMEL_FLEXCOM_MODE_USART ||
-	    opmode > ATMEL_FLEXCOM_MODE_TWI)
+	if (ddata->opmode < ATMEL_FLEXCOM_MODE_USART ||
+	    ddata->opmode > ATMEL_FLEXCOM_MODE_TWI)
 		return -EINVAL;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
+	ddata->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(ddata->base))
+		return PTR_ERR(ddata->base);
 
-	clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	ddata->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ddata->clk))
+		return PTR_ERR(ddata->clk);
 
-	err = clk_prepare_enable(clk);
+	err = clk_prepare_enable(ddata->clk);
 	if (err)
 		return err;
 
@@ -76,9 +85,9 @@ static int atmel_flexcom_probe(struct platform_device *pdev)
 	 * inaccessible and are read as zero. Also the external I/O lines of the
 	 * Flexcom are muxed to reach the selected device.
 	 */
-	writel(FLEX_MR_OPMODE(opmode), base + FLEX_MR);
+	writel(FLEX_MR_OPMODE(ddata->opmode), ddata->base + FLEX_MR);
 
-	clk_disable_unprepare(clk);
+	clk_disable_unprepare(ddata->clk);
 
 	return devm_of_platform_populate(&pdev->dev);
 }
@@ -89,10 +98,34 @@ static const struct of_device_id atmel_flexcom_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, atmel_flexcom_of_match);
 
+#ifdef CONFIG_PM_SLEEP
+static int atmel_flexcom_resume(struct device *dev)
+{
+	struct atmel_flexcom *ddata = dev_get_drvdata(dev);
+	int err;
+	u32 val;
+
+	err = clk_prepare_enable(ddata->clk);
+	if (err)
+		return err;
+
+	val = FLEX_MR_OPMODE(ddata->opmode),
+	writel(val, ddata->base + FLEX_MR);
+
+	clk_disable_unprepare(ddata->clk);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(atmel_flexcom_pm_ops, NULL,
+			 atmel_flexcom_resume);
+
 static struct platform_driver atmel_flexcom_driver = {
 	.probe	= atmel_flexcom_probe,
 	.driver	= {
 		.name		= "atmel_flexcom",
+		.pm		= &atmel_flexcom_pm_ops,
 		.of_match_table	= atmel_flexcom_of_match,
 	},
 };

drivers/mfd/axp20x.c

@@ -129,6 +129,7 @@ static const struct regmap_range axp288_volatile_ranges[] = {
 	regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP288_POWER_REASON),
 	regmap_reg_range(AXP288_BC_GLOBAL, AXP288_BC_GLOBAL),
 	regmap_reg_range(AXP288_BC_DET_STAT, AXP288_BC_DET_STAT),
+	regmap_reg_range(AXP20X_CHRG_BAK_CTRL, AXP20X_CHRG_BAK_CTRL),
 	regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L),
 	regmap_reg_range(AXP20X_TIMER_CTRL, AXP20X_TIMER_CTRL),
 	regmap_reg_range(AXP22X_GPIO_STATE, AXP22X_GPIO_STATE),
@@ -878,6 +879,9 @@ static struct mfd_cell axp813_cells[] = {
 		.resources		= axp803_pek_resources,
 	}, {
 		.name			= "axp20x-regulator",
+	}, {
+		.name			= "axp20x-gpio",
+		.of_compatible		= "x-powers,axp813-gpio",
 	}
 };
 

drivers/mfd/cros_ec.c

@@ -40,13 +40,13 @@ static struct cros_ec_platform pd_p = {
 };
 
 static const struct mfd_cell ec_cell = {
-	.name = "cros-ec-ctl",
+	.name = "cros-ec-dev",
 	.platform_data = &ec_p,
 	.pdata_size = sizeof(ec_p),
 };
 
 static const struct mfd_cell ec_pd_cell = {
-	.name = "cros-ec-ctl",
+	.name = "cros-ec-dev",
 	.platform_data = &pd_p,
 	.pdata_size = sizeof(pd_p),
 };

drivers/platform/chrome/cros_ec_dev.c → drivers/mfd/cros_ec_dev.c

@@ -25,9 +25,10 @@
 #include <linux/slab.h>
 #include <linux/uaccess.h>
 
-#include "cros_ec_debugfs.h"
 #include "cros_ec_dev.h"
 
+#define DRV_NAME "cros-ec-dev"
+
 /* Device variables */
 #define CROS_MAX_DEV 128
 static int ec_major;
@@ -461,7 +462,7 @@ static int ec_device_remove(struct platform_device *pdev)
 }
 
 static const struct platform_device_id cros_ec_id[] = {
-	{ "cros-ec-ctl", 0 },
+	{ DRV_NAME, 0 },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(platform, cros_ec_id);
@@ -493,7 +494,7 @@ static const struct dev_pm_ops cros_ec_dev_pm_ops = {
 
 static struct platform_driver cros_ec_dev_driver = {
 	.driver = {
-		.name = "cros-ec-ctl",
+		.name = DRV_NAME,
 		.pm = &cros_ec_dev_pm_ops,
 	},
 	.probe = ec_device_probe,
@@ -544,6 +545,7 @@ static void __exit cros_ec_dev_exit(void)
 module_init(cros_ec_dev_init);
 module_exit(cros_ec_dev_exit);
 
+MODULE_ALIAS("platform:" DRV_NAME);
 MODULE_AUTHOR("Bill Richardson <wfrichar@chromium.org>");
 MODULE_DESCRIPTION("Userspace interface to the Chrome OS Embedded Controller");
 MODULE_VERSION("1.0");

drivers/mfd/cros_ec_spi.c

@@ -72,8 +72,7 @@
  * struct cros_ec_spi - information about a SPI-connected EC
  *
  * @spi: SPI device we are connected to
- * @last_transfer_ns: time that we last finished a transfer, or 0 if there
- *	if no record
+ * @last_transfer_ns: time that we last finished a transfer.
  * @start_of_msg_delay: used to set the delay_usecs on the spi_transfer that
  *      is sent when we want to turn on CS at the start of a transaction.
  * @end_of_msg_delay: used to set the delay_usecs on the spi_transfer that
@@ -379,18 +378,15 @@ static int cros_ec_pkt_xfer_spi(struct cros_ec_device *ec_dev,
 	u8 sum;
 	u8 rx_byte;
 	int ret = 0, final_ret;
+	unsigned long delay;
 
 	len = cros_ec_prepare_tx(ec_dev, ec_msg);
 	dev_dbg(ec_dev->dev, "prepared, len=%d\n", len);
 
 	/* If it's too soon to do another transaction, wait */
-	if (ec_spi->last_transfer_ns) {
-		unsigned long delay;	/* The delay completed so far */
-
 	delay = ktime_get_ns() - ec_spi->last_transfer_ns;
 	if (delay < EC_SPI_RECOVERY_TIME_NS)
 		ndelay(EC_SPI_RECOVERY_TIME_NS - delay);
-	}
 
 	rx_buf = kzalloc(len, GFP_KERNEL);
 	if (!rx_buf)
@@ -509,18 +505,15 @@ static int cros_ec_cmd_xfer_spi(struct cros_ec_device *ec_dev,
 	u8 rx_byte;
 	int sum;
 	int ret = 0, final_ret;
+	unsigned long delay;
 
 	len = cros_ec_prepare_tx(ec_dev, ec_msg);
 	dev_dbg(ec_dev->dev, "prepared, len=%d\n", len);
 
 	/* If it's too soon to do another transaction, wait */
-	if (ec_spi->last_transfer_ns) {
-		unsigned long delay;	/* The delay completed so far */
-
 	delay = ktime_get_ns() - ec_spi->last_transfer_ns;
 	if (delay < EC_SPI_RECOVERY_TIME_NS)
 		ndelay(EC_SPI_RECOVERY_TIME_NS - delay);
-	}
 
 	rx_buf = kzalloc(len, GFP_KERNEL);
 	if (!rx_buf)

drivers/mfd/intel_soc_pmic_core.c

@@ -16,7 +16,6 @@
  * Author: Zhu, Lejun <lejun.zhu@linux.intel.com>
  */
 
-#include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/mfd/core.h>
 #include <linux/i2c.h>

drivers/mfd/kempld-core.c

@@ -458,7 +458,7 @@ static int kempld_probe(struct platform_device *pdev)
 		return -EINVAL;
 
 	pld->io_base = devm_ioport_map(dev, ioport->start,
-					ioport->end - ioport->start);
+					resource_size(ioport));
 	if (!pld->io_base)
 		return -ENOMEM;
 

drivers/mfd/lpc_ich.c

@@ -1143,11 +1143,6 @@ static int lpc_ich_init_spi(struct pci_dev *dev)
 			res->end = res->start + SPIBASE_APL_SZ - 1;
 
 			pci_bus_read_config_dword(bus, spi, BCR, &bcr);
-			if (!(bcr & BCR_WPD)) {
-				bcr |= BCR_WPD;
-				pci_bus_write_config_dword(bus, spi, BCR, bcr);
-				pci_bus_read_config_dword(bus, spi, BCR, &bcr);
-			}
 			info->writeable = !!(bcr & BCR_WPD);
 		}
 

drivers/mfd/max77843.c

@@ -15,7 +15,6 @@
 #include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/init.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/max77693-common.h>
 #include <linux/mfd/max77843-private.h>

drivers/mfd/palmas.c

@@ -430,6 +430,7 @@ static void palmas_power_off(void)
 {
 	unsigned int addr;
 	int ret, slave;
+	u8 powerhold_mask;
 	struct device_node *np = palmas_dev->dev->of_node;
 
 	if (of_property_read_bool(np, "ti,palmas-override-powerhold")) {
@@ -437,8 +438,15 @@ static void palmas_power_off(void)
 					  PALMAS_PRIMARY_SECONDARY_PAD2);
 		slave = PALMAS_BASE_TO_SLAVE(PALMAS_PU_PD_OD_BASE);
 
+		if (of_device_is_compatible(np, "ti,tps65917"))
+			powerhold_mask =
+				TPS65917_PRIMARY_SECONDARY_PAD2_GPIO_5_MASK;
+		else
+			powerhold_mask =
+				PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_MASK;
+
 		ret = regmap_update_bits(palmas_dev->regmap[slave], addr,
-				PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_MASK, 0);
+					 powerhold_mask, 0);
 		if (ret)
 			dev_err(palmas_dev->dev,
 				"Unable to write PRIMARY_SECONDARY_PAD2 %d\n",

drivers/mfd/pcf50633-core.c

@@ -149,7 +149,7 @@ pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
 
 	*pdev = platform_device_alloc(name, -1);
 	if (!*pdev) {
-		dev_err(pcf->dev, "Falied to allocate %s\n", name);
+		dev_err(pcf->dev, "Failed to allocate %s\n", name);
 		return;
 	}
 

drivers/mfd/stm32-lptimer.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * STM32 Low-Power Timer parent driver.
- *
  * Copyright (C) STMicroelectronics 2017
- *
  * Author: Fabrice Gasnier <fabrice.gasnier@st.com>
- *
  * Inspired by Benjamin Gaignard's stm32-timers driver
- *
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/mfd/stm32-lptimer.h>

drivers/mfd/stm32-timers.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) STMicroelectronics 2016
- *
  * Author: Benjamin Gaignard <benjamin.gaignard@st.com>
- *
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #include <linux/mfd/stm32-timers.h>

drivers/mfd/ti_am335x_tscadc.c

@@ -124,7 +124,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	struct ti_tscadc_dev	*tscadc;
 	struct resource		*res;
 	struct clk		*clk;
-	struct device_node	*node = pdev->dev.of_node;
+	struct device_node	*node;
 	struct mfd_cell		*cell;
 	struct property         *prop;
 	const __be32            *cur;

drivers/mfd/tmio_core.c

@@ -9,6 +9,26 @@
 #include <linux/export.h>
 #include <linux/mfd/tmio.h>
 
+#define CNF_CMD     0x04
+#define CNF_CTL_BASE   0x10
+#define CNF_INT_PIN  0x3d
+#define CNF_STOP_CLK_CTL 0x40
+#define CNF_GCLK_CTL 0x41
+#define CNF_SD_CLK_MODE 0x42
+#define CNF_PIN_STATUS 0x44
+#define CNF_PWR_CTL_1 0x48
+#define CNF_PWR_CTL_2 0x49
+#define CNF_PWR_CTL_3 0x4a
+#define CNF_CARD_DETECT_MODE 0x4c
+#define CNF_SD_SLOT 0x50
+#define CNF_EXT_GCLK_CTL_1 0xf0
+#define CNF_EXT_GCLK_CTL_2 0xf1
+#define CNF_EXT_GCLK_CTL_3 0xf9
+#define CNF_SD_LED_EN_1 0xfa
+#define CNF_SD_LED_EN_2 0xfe
+
+#define   SDCREN 0x2   /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
+
 int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base)
 {
 	/* Enable the MMC/SD Control registers */

drivers/misc/Kconfig

@@ -496,6 +496,10 @@ config PCI_ENDPOINT_TEST
            Enable this configuration option to enable the host side test driver
            for PCI Endpoint.
 
+config MISC_RTSX
+	tristate
+	default MISC_RTSX_PCI || MISC_RTSX_USB
+
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
@@ -508,4 +512,5 @@ source "drivers/misc/mic/Kconfig"
 source "drivers/misc/genwqe/Kconfig"
 source "drivers/misc/echo/Kconfig"
 source "drivers/misc/cxl/Kconfig"
+source "drivers/misc/cardreader/Kconfig"
 endmenu

drivers/misc/Makefile

@@ -55,6 +55,7 @@ obj-$(CONFIG_CXL_BASE)		+= cxl/
 obj-$(CONFIG_ASPEED_LPC_CTRL)	+= aspeed-lpc-ctrl.o
 obj-$(CONFIG_ASPEED_LPC_SNOOP)	+= aspeed-lpc-snoop.o
 obj-$(CONFIG_PCI_ENDPOINT_TEST)	+= pci_endpoint_test.o
+obj-$(CONFIG_MISC_RTSX)	+= cardreader/
 
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_core.o
 lkdtm-$(CONFIG_LKDTM)		+= lkdtm_bugs.o

drivers/misc/cardreader/Kconfig

+config MISC_RTSX_PCI
+	tristate "Realtek PCI-E card reader"
+	depends on PCI
+	select MFD_CORE
+	help
+	  This supports for Realtek PCI-Express card reader including rts5209,
+	  rts5227, rts522A, rts5229, rts5249, rts524A, rts525A, rtl8411, rts5260.
+	  Realtek card readers support access to many types of memory cards,
+	  such as Memory Stick, Memory Stick Pro, Secure Digital and
+	  MultiMediaCard.
+
+config MISC_RTSX_USB
+	tristate "Realtek USB card reader"
+	depends on USB
+	select MFD_CORE
+	help
+	  Select this option to get support for Realtek USB 2.0 card readers
+	  including RTS5129, RTS5139, RTS5179 and RTS5170.
+	  Realtek card reader supports access to many types of memory cards,
+	  such as Memory Stick Pro, Secure Digital and MultiMediaCard.

drivers/misc/cardreader/Makefile

+rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o rts5260.o
+
+obj-$(CONFIG_MISC_RTSX_PCI)	+= rtsx_pci.o
+obj-$(CONFIG_MISC_RTSX_USB)	+= rtsx_usb.o

drivers/mfd/rtl8411.c → drivers/misc/cardreader/rtl8411.c

@@ -23,7 +23,7 @@
 #include <linux/module.h>
 #include <linux/bitops.h>
 #include <linux/delay.h>
-#include <linux/mfd/rtsx_pci.h>
+#include <linux/rtsx_pci.h>
 
 #include "rtsx_pcr.h"
 

drivers/mfd/rts5209.c → drivers/misc/cardreader/rts5209.c

@@ -21,7 +21,7 @@
 
 #include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/mfd/rtsx_pci.h>
+#include <linux/rtsx_pci.h>
 
 #include "rtsx_pcr.h"
 

drivers/mfd/rts5227.c → drivers/misc/cardreader/rts5227.c

@@ -22,7 +22,7 @@
 
 #include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/mfd/rtsx_pci.h>
+#include <linux/rtsx_pci.h>
 
 #include "rtsx_pcr.h"
 

drivers/mfd/rts5229.c → drivers/misc/cardreader/rts5229.c

@@ -21,7 +21,7 @@
 
 #include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/mfd/rtsx_pci.h>
+#include <linux/rtsx_pci.h>
 
 #include "rtsx_pcr.h"
 

drivers/mfd/rts5249.c → drivers/misc/cardreader/rts5249.c

@@ -21,7 +21,7 @@
 
 #include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/mfd/rtsx_pci.h>
+#include <linux/rtsx_pci.h>
 
 #include "rtsx_pcr.h"
 
@@ -738,4 +738,3 @@ void rts525a_init_params(struct rtsx_pcr *pcr)
 	pcr->reg_pm_ctrl3 = RTS524A_PM_CTRL3;
 	pcr->ops = &rts525a_pcr_ops;
 }
-

drivers/misc/cardreader/rts5260.h

+#ifndef __RTS5260_H__
+#define __RTS5260_H__
+
+#define RTS5260_DVCC_CTRL		0xFF73
+#define RTS5260_DVCC_OCP_EN		(0x01 << 7)
+#define RTS5260_DVCC_OCP_THD_MASK	(0x07 << 4)
+#define RTS5260_DVCC_POWERON		(0x01 << 3)
+#define RTS5260_DVCC_OCP_CL_EN		(0x01 << 2)
+
+#define RTS5260_DVIO_CTRL		0xFF75
+#define RTS5260_DVIO_OCP_EN		(0x01 << 7)
+#define RTS5260_DVIO_OCP_THD_MASK	(0x07 << 4)
+#define RTS5260_DVIO_POWERON		(0x01 << 3)
+#define RTS5260_DVIO_OCP_CL_EN		(0x01 << 2)
+
+#define RTS5260_DV331812_CFG		0xFF71
+#define RTS5260_DV331812_OCP_EN		(0x01 << 7)
+#define RTS5260_DV331812_OCP_THD_MASK	(0x07 << 4)
+#define RTS5260_DV331812_POWERON	(0x01 << 3)
+#define RTS5260_DV331812_SEL		(0x01 << 2)
+#define RTS5260_DV331812_VDD1		(0x01 << 2)
+#define RTS5260_DV331812_VDD2		(0x00 << 2)
+
+#define RTS5260_DV331812_OCP_THD_120	(0x00 << 4)
+#define RTS5260_DV331812_OCP_THD_140	(0x01 << 4)
+#define RTS5260_DV331812_OCP_THD_160	(0x02 << 4)
+#define RTS5260_DV331812_OCP_THD_180	(0x03 << 4)
+#define RTS5260_DV331812_OCP_THD_210	(0x04 << 4)
+#define RTS5260_DV331812_OCP_THD_240	(0x05 << 4)
+#define RTS5260_DV331812_OCP_THD_270	(0x06 << 4)
+#define RTS5260_DV331812_OCP_THD_300	(0x07 << 4)
+
+#define RTS5260_DVIO_OCP_THD_250	(0x00 << 4)
+#define RTS5260_DVIO_OCP_THD_300	(0x01 << 4)
+#define RTS5260_DVIO_OCP_THD_350	(0x02 << 4)
+#define RTS5260_DVIO_OCP_THD_400	(0x03 << 4)
+#define RTS5260_DVIO_OCP_THD_450	(0x04 << 4)
+#define RTS5260_DVIO_OCP_THD_500	(0x05 << 4)
+#define RTS5260_DVIO_OCP_THD_550	(0x06 << 4)
+#define RTS5260_DVIO_OCP_THD_600	(0x07 << 4)
+
+#define RTS5260_DVCC_OCP_THD_550	(0x00 << 4)
+#define RTS5260_DVCC_OCP_THD_970	(0x05 << 4)
+
+#endif

drivers/mfd/rtsx_pcr.c → drivers/misc/cardreader/rtsx_pcr.c

@@ -29,7 +29,7 @@
 #include <linux/idr.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/core.h>
-#include <linux/mfd/rtsx_pci.h>
+#include <linux/rtsx_pci.h>
 #include <linux/mmc/card.h>
 #include <asm/unaligned.h>
 
@@ -62,6 +62,7 @@ static const struct pci_device_id rtsx_pci_ids[] = {
 	{ PCI_DEVICE(0x10EC, 0x5286), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x524A), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ PCI_DEVICE(0x10EC, 0x525A), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+	{ PCI_DEVICE(0x10EC, 0x5260), PCI_CLASS_OTHERS << 16, 0xFF0000 },
 	{ 0, }
 };
 
@@ -334,6 +335,9 @@ EXPORT_SYMBOL_GPL(rtsx_pci_read_phy_register);
 
 void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr)
 {
+	if (pcr->ops->stop_cmd)
+		return pcr->ops->stop_cmd(pcr);
+
 	rtsx_pci_writel(pcr, RTSX_HCBCTLR, STOP_CMD);
 	rtsx_pci_writel(pcr, RTSX_HDBCTLR, STOP_DMA);
 
@@ -826,7 +830,7 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
 		return err;
 
 	/* Wait SSC clock stable */
-	udelay(10);
+	udelay(SSC_CLOCK_STABLE_WAIT);
 	err = rtsx_pci_write_register(pcr, CLK_CTL, CLK_LOW_FREQ, 0);
 	if (err < 0)
 		return err;
@@ -963,6 +967,20 @@ static void rtsx_pci_card_detect(struct work_struct *work)
 				pcr->slots[RTSX_MS_CARD].p_dev);
 }
 
+void rtsx_pci_process_ocp(struct rtsx_pcr *pcr)
+{
+	if (pcr->ops->process_ocp)
+		pcr->ops->process_ocp(pcr);
+}
+
+int rtsx_pci_process_ocp_interrupt(struct rtsx_pcr *pcr)
+{
+	if (pcr->option.ocp_en)
+		rtsx_pci_process_ocp(pcr);
+
+	return 0;
+}
+
 static irqreturn_t rtsx_pci_isr(int irq, void *dev_id)
 {
 	struct rtsx_pcr *pcr = dev_id;
@@ -987,6 +1005,9 @@ static irqreturn_t rtsx_pci_isr(int irq, void *dev_id)
 
 	int_reg &= (pcr->bier | 0x7FFFFF);
 
+	if (int_reg & SD_OC_INT)
+		rtsx_pci_process_ocp_interrupt(pcr);
+
 	if (int_reg & SD_INT) {
 		if (int_reg & SD_EXIST) {
 			pcr->card_inserted |= SD_EXIST;
@@ -1119,6 +1140,102 @@ static void rtsx_pci_power_off(struct rtsx_pcr *pcr, u8 pm_state)
 }
 #endif
 
+void rtsx_pci_enable_ocp(struct rtsx_pcr *pcr)
+{
+	u8 val = SD_OCP_INT_EN | SD_DETECT_EN;
+
+	if (pcr->ops->enable_ocp)
+		pcr->ops->enable_ocp(pcr);
+	else
+		rtsx_pci_write_register(pcr, REG_OCPCTL, 0xFF, val);
+
+}
+
+void rtsx_pci_disable_ocp(struct rtsx_pcr *pcr)
+{
+	u8 mask = SD_OCP_INT_EN | SD_DETECT_EN;
+
+	if (pcr->ops->disable_ocp)
+		pcr->ops->disable_ocp(pcr);
+	else
+		rtsx_pci_write_register(pcr, REG_OCPCTL, mask, 0);
+}
+
+void rtsx_pci_init_ocp(struct rtsx_pcr *pcr)
+{
+	if (pcr->ops->init_ocp) {
+		pcr->ops->init_ocp(pcr);
+	} else {
+		struct rtsx_cr_option *option = &(pcr->option);
+
+		if (option->ocp_en) {
+			u8 val = option->sd_400mA_ocp_thd;
+
+			rtsx_pci_write_register(pcr, FPDCTL, OC_POWER_DOWN, 0);
+			rtsx_pci_write_register(pcr, REG_OCPPARA1,
+				SD_OCP_TIME_MASK, SD_OCP_TIME_800);
+			rtsx_pci_write_register(pcr, REG_OCPPARA2,
+				SD_OCP_THD_MASK, val);
+			rtsx_pci_write_register(pcr, REG_OCPGLITCH,
+				SD_OCP_GLITCH_MASK, pcr->hw_param.ocp_glitch);
+			rtsx_pci_enable_ocp(pcr);
+		} else {
+			/* OC power down */
+			rtsx_pci_write_register(pcr, FPDCTL, OC_POWER_DOWN,
+				OC_POWER_DOWN);
+		}
+	}
+}
+
+int rtsx_pci_get_ocpstat(struct rtsx_pcr *pcr, u8 *val)
+{
+	if (pcr->ops->get_ocpstat)
+		return pcr->ops->get_ocpstat(pcr, val);
+	else
+		return rtsx_pci_read_register(pcr, REG_OCPSTAT, val);
+}
+
+void rtsx_pci_clear_ocpstat(struct rtsx_pcr *pcr)
+{
+	if (pcr->ops->clear_ocpstat) {
+		pcr->ops->clear_ocpstat(pcr);
+	} else {
+		u8 mask = SD_OCP_INT_CLR | SD_OC_CLR;
+		u8 val = SD_OCP_INT_CLR | SD_OC_CLR;
+
+		rtsx_pci_write_register(pcr, REG_OCPCTL, mask, val);
+		rtsx_pci_write_register(pcr, REG_OCPCTL, mask, 0);
+	}
+}
+
+int rtsx_sd_power_off_card3v3(struct rtsx_pcr *pcr)
+{
+	rtsx_pci_write_register(pcr, CARD_CLK_EN, SD_CLK_EN |
+		MS_CLK_EN | SD40_CLK_EN, 0);
+	rtsx_pci_write_register(pcr, CARD_OE, SD_OUTPUT_EN, 0);
+
+	rtsx_pci_card_power_off(pcr, RTSX_SD_CARD);
+
+	msleep(50);
+
+	rtsx_pci_card_pull_ctl_disable(pcr, RTSX_SD_CARD);
+
+	return 0;
+}
+
+int rtsx_ms_power_off_card3v3(struct rtsx_pcr *pcr)
+{
+	rtsx_pci_write_register(pcr, CARD_CLK_EN, SD_CLK_EN |
+		MS_CLK_EN | SD40_CLK_EN, 0);
+
+	rtsx_pci_card_pull_ctl_disable(pcr, RTSX_MS_CARD);
+
+	rtsx_pci_write_register(pcr, CARD_OE, MS_OUTPUT_EN, 0);
+	rtsx_pci_card_power_off(pcr, RTSX_MS_CARD);
+
+	return 0;
+}
+
 static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
 {
 	int err;
@@ -1189,6 +1306,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
 	case PID_5250:
 	case PID_524A:
 	case PID_525A:
+	case PID_5260:
 		rtsx_pci_write_register(pcr, PM_CLK_FORCE_CTL, 1, 1);
 		break;
 	default:
@@ -1265,6 +1383,9 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
 	case 0x5286:
 		rtl8402_init_params(pcr);
 		break;
+	case 0x5260:
+		rts5260_init_params(pcr);
+		break;
 	}
 
 	pcr_dbg(pcr, "PID: 0x%04x, IC version: 0x%02x\n",

drivers/mfd/rtsx_pcr.h → drivers/misc/cardreader/rtsx_pcr.h

@@ -22,7 +22,7 @@
 #ifndef __RTSX_PCR_H
 #define __RTSX_PCR_H
 
-#include <linux/mfd/rtsx_pci.h>
+#include <linux/rtsx_pci.h>
 
 #define MIN_DIV_N_PCR		80
 #define MAX_DIV_N_PCR		208
@@ -44,6 +44,8 @@
 #define ASPM_MASK_NEG		0xFC
 #define MASK_8_BIT_DEF		0xFF
 
+#define SSC_CLOCK_STABLE_WAIT	130
+
 int __rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val);
 int __rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val);
 
@@ -57,6 +59,7 @@ void rts5249_init_params(struct rtsx_pcr *pcr);
 void rts524a_init_params(struct rtsx_pcr *pcr);
 void rts525a_init_params(struct rtsx_pcr *pcr);
 void rtl8411b_init_params(struct rtsx_pcr *pcr);
+void rts5260_init_params(struct rtsx_pcr *pcr);
 
 static inline u8 map_sd_drive(int idx)
 {
@@ -99,5 +102,12 @@ do {									\
 int rtsx_gops_pm_reset(struct rtsx_pcr *pcr);
 int rtsx_set_ltr_latency(struct rtsx_pcr *pcr, u32 latency);
 int rtsx_set_l1off_sub(struct rtsx_pcr *pcr, u8 val);
+void rtsx_pci_init_ocp(struct rtsx_pcr *pcr);
+void rtsx_pci_disable_ocp(struct rtsx_pcr *pcr);
+void rtsx_pci_enable_ocp(struct rtsx_pcr *pcr);
+int rtsx_pci_get_ocpstat(struct rtsx_pcr *pcr, u8 *val);
+void rtsx_pci_clear_ocpstat(struct rtsx_pcr *pcr);
+int rtsx_sd_power_off_card3v3(struct rtsx_pcr *pcr);
+int rtsx_ms_power_off_card3v3(struct rtsx_pcr *pcr);
 
 #endif

drivers/mfd/rtsx_usb.c → drivers/misc/cardreader/rtsx_usb.c

@@ -23,7 +23,7 @@
 #include <linux/usb.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/core.h>
-#include <linux/mfd/rtsx_usb.h>
+#include <linux/rtsx_usb.h>
 
 static int polling_pipe = 1;
 module_param(polling_pipe, int, S_IRUGO | S_IWUSR);

drivers/mmc/host/Kconfig

@@ -838,14 +838,14 @@ config MMC_USDHI6ROL0
 
 config MMC_REALTEK_PCI
 	tristate "Realtek PCI-E SD/MMC Card Interface Driver"
-	depends on MFD_RTSX_PCI
+	depends on MISC_RTSX_PCI
 	help
 	  Say Y here to include driver code to support SD/MMC card interface
 	  of Realtek PCI-E card reader
 
 config MMC_REALTEK_USB
 	tristate "Realtek USB SD/MMC Card Interface Driver"
-	depends on MFD_RTSX_USB
+	depends on MISC_RTSX_USB
 	help
 	  Say Y here to include driver code to support SD/MMC card interface
 	  of Realtek RTS5129/39 series card reader

drivers/mmc/host/rtsx_pci_sdmmc.c

@@ -30,7 +30,7 @@
 #include <linux/mmc/sd.h>
 #include <linux/mmc/sdio.h>
 #include <linux/mmc/card.h>
-#include <linux/mfd/rtsx_pci.h>
+#include <linux/rtsx_pci.h>
 #include <asm/unaligned.h>
 
 struct realtek_pci_sdmmc {

drivers/mmc/host/rtsx_usb_sdmmc.c

@@ -31,7 +31,7 @@
 #include <linux/scatterlist.h>
 #include <linux/pm_runtime.h>
 
-#include <linux/mfd/rtsx_usb.h>
+#include <linux/rtsx_usb.h>
 #include <asm/unaligned.h>
 
 #if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \

drivers/platform/chrome/Kconfig

@@ -38,14 +38,8 @@ config CHROMEOS_PSTORE
 	  If you have a supported Chromebook, choose Y or M here.
 	  The module will be called chromeos_pstore.
 
-config CROS_EC_CHARDEV
-        tristate "Chrome OS Embedded Controller userspace device interface"
-        depends on MFD_CROS_EC
-        ---help---
-          This driver adds support to talk with the ChromeOS EC from userspace.
-
-          If you have a supported Chromebook, choose Y or M here.
-          The module will be called cros_ec_dev.
+config CROS_EC_CTL
+        tristate
 
 config CROS_EC_LPC
         tristate "ChromeOS Embedded Controller (LPC)"

drivers/platform/chrome/Makefile

@@ -2,10 +2,9 @@
 
 obj-$(CONFIG_CHROMEOS_LAPTOP)		+= chromeos_laptop.o
 obj-$(CONFIG_CHROMEOS_PSTORE)		+= chromeos_pstore.o
-cros_ec_devs-objs			:= cros_ec_dev.o cros_ec_sysfs.o \
-					   cros_ec_lightbar.o cros_ec_vbc.o \
-					   cros_ec_debugfs.o
-obj-$(CONFIG_CROS_EC_CHARDEV)		+= cros_ec_devs.o
+cros_ec_ctl-objs			:= cros_ec_sysfs.o cros_ec_lightbar.o \
+					   cros_ec_vbc.o cros_ec_debugfs.o
+obj-$(CONFIG_CROS_EC_CTL)		+= cros_ec_ctl.o
 cros_ec_lpcs-objs			:= cros_ec_lpc.o cros_ec_lpc_reg.o
 cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC)	+= cros_ec_lpc_mec.o
 obj-$(CONFIG_CROS_EC_LPC)		+= cros_ec_lpcs.o

drivers/platform/chrome/cros_ec_debugfs.c

@@ -29,9 +29,6 @@
 #include <linux/slab.h>
 #include <linux/wait.h>
 
-#include "cros_ec_dev.h"
-#include "cros_ec_debugfs.h"
-
 #define LOG_SHIFT		14
 #define LOG_SIZE		(1 << LOG_SHIFT)
 #define LOG_POLL_SEC		10
@@ -390,6 +387,7 @@ int cros_ec_debugfs_init(struct cros_ec_dev *ec)
 	debugfs_remove_recursive(debug_info->dir);
 	return ret;
 }
+EXPORT_SYMBOL(cros_ec_debugfs_init);
 
 void cros_ec_debugfs_remove(struct cros_ec_dev *ec)
 {
@@ -399,3 +397,4 @@ void cros_ec_debugfs_remove(struct cros_ec_dev *ec)
 	debugfs_remove_recursive(ec->debug_info->dir);
 	cros_ec_cleanup_console_log(ec->debug_info);
 }
+EXPORT_SYMBOL(cros_ec_debugfs_remove);

drivers/platform/chrome/cros_ec_debugfs.h

-/*
- * Copyright 2015 Google, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef _DRV_CROS_EC_DEBUGFS_H_
-#define _DRV_CROS_EC_DEBUGFS_H_
-
-#include "cros_ec_dev.h"
-
-/* debugfs stuff */
-int cros_ec_debugfs_init(struct cros_ec_dev *ec);
-void cros_ec_debugfs_remove(struct cros_ec_dev *ec);
-
-#endif  /* _DRV_CROS_EC_DEBUGFS_H_ */

drivers/platform/chrome/cros_ec_lightbar.c

@@ -33,8 +33,6 @@
 #include <linux/uaccess.h>
 #include <linux/slab.h>
 
-#include "cros_ec_dev.h"
-
 /* Rate-limit the lightbar interface to prevent DoS. */
 static unsigned long lb_interval_jiffies = 50 * HZ / 1000;
 
@@ -414,6 +412,7 @@ int lb_manual_suspend_ctrl(struct cros_ec_dev *ec, uint8_t enable)
 
 	return ret;
 }
+EXPORT_SYMBOL(lb_manual_suspend_ctrl);
 
 int lb_suspend(struct cros_ec_dev *ec)
 {
@@ -422,6 +421,7 @@ int lb_suspend(struct cros_ec_dev *ec)
 
 	return lb_send_empty_cmd(ec, LIGHTBAR_CMD_SUSPEND);
 }
+EXPORT_SYMBOL(lb_suspend);
 
 int lb_resume(struct cros_ec_dev *ec)
 {
@@ -430,6 +430,7 @@ int lb_resume(struct cros_ec_dev *ec)
 
 	return lb_send_empty_cmd(ec, LIGHTBAR_CMD_RESUME);
 }
+EXPORT_SYMBOL(lb_resume);
 
 static ssize_t sequence_store(struct device *dev, struct device_attribute *attr,
 			      const char *buf, size_t count)
@@ -622,3 +623,4 @@ struct attribute_group cros_ec_lightbar_attr_group = {
 	.attrs = __lb_cmds_attrs,
 	.is_visible = cros_ec_lightbar_attrs_are_visible,
 };
+EXPORT_SYMBOL(cros_ec_lightbar_attr_group);

drivers/platform/chrome/cros_ec_sysfs.c

@@ -34,8 +34,6 @@
 #include <linux/types.h>
 #include <linux/uaccess.h>
 
-#include "cros_ec_dev.h"
-
 /* Accessor functions */
 
 static ssize_t show_ec_reboot(struct device *dev,
@@ -294,4 +292,7 @@ static struct attribute *__ec_attrs[] = {
 struct attribute_group cros_ec_attr_group = {
 	.attrs = __ec_attrs,
 };
+EXPORT_SYMBOL(cros_ec_attr_group);
 
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS EC control driver");

drivers/platform/chrome/cros_ec_vbc.c

@@ -135,3 +135,4 @@ struct attribute_group cros_ec_vbc_attr_group = {
 	.bin_attrs = cros_ec_vbc_bin_attrs,
 	.is_bin_visible = cros_ec_vbc_is_visible,
 };
+EXPORT_SYMBOL(cros_ec_vbc_attr_group);

drivers/tty/serdev/core.c

@@ -132,6 +132,33 @@ void serdev_device_close(struct serdev_device *serdev)
 }
 EXPORT_SYMBOL_GPL(serdev_device_close);
 
+static void devm_serdev_device_release(struct device *dev, void *dr)
+{
+	serdev_device_close(*(struct serdev_device **)dr);
+}
+
+int devm_serdev_device_open(struct device *dev, struct serdev_device *serdev)
+{
+	struct serdev_device **dr;
+	int ret;
+
+	dr = devres_alloc(devm_serdev_device_release, sizeof(*dr), GFP_KERNEL);
+	if (!dr)
+		return -ENOMEM;
+
+	ret = serdev_device_open(serdev);
+	if (ret) {
+		devres_free(dr);
+		return ret;
+	}
+
+	*dr = serdev;
+	devres_add(dev, dr);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(devm_serdev_device_open);
+
 void serdev_device_write_wakeup(struct serdev_device *serdev)
 {
 	complete(&serdev->write_comp);
@@ -268,7 +295,7 @@ static int serdev_drv_probe(struct device *dev)
 static int serdev_drv_remove(struct device *dev)
 {
 	const struct serdev_device_driver *sdrv = to_serdev_device_driver(dev->driver);
-
+	if (sdrv->remove)
 		sdrv->remove(to_serdev_device(dev));
 	return 0;
 }

drivers/watchdog/Kconfig

@@ -223,6 +223,13 @@ config ZIIRAVE_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called ziirave_wdt.
 
+config RAVE_SP_WATCHDOG
+	tristate "RAVE SP Watchdog timer"
+	depends on RAVE_SP_CORE
+	select WATCHDOG_CORE
+	help
+	  Support for the watchdog on RAVE SP device.
+
 # ALPHA Architecture
 
 # ARM Architecture

drivers/watchdog/Makefile

@@ -224,3 +224,4 @@ obj-$(CONFIG_MAX77620_WATCHDOG) += max77620_wdt.o
 obj-$(CONFIG_ZIIRAVE_WATCHDOG) += ziirave_wdt.o
 obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
 obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o
+obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o

drivers/watchdog/rave-sp-wdt.c

+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Driver for watchdog aspect of for Zodiac Inflight Innovations RAVE
+ * Supervisory Processor(SP) MCU
+ *
+ * Copyright (C) 2017 Zodiac Inflight Innovation
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/mfd/rave-sp.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/slab.h>
+#include <linux/watchdog.h>
+
+enum {
+	RAVE_SP_RESET_BYTE = 1,
+	RAVE_SP_RESET_REASON_NORMAL = 0,
+	RAVE_SP_RESET_DELAY_MS = 500,
+};
+
+/**
+ * struct rave_sp_wdt_variant - RAVE SP watchdog variant
+ *
+ * @max_timeout:	Largest possible watchdog timeout setting
+ * @min_timeout:	Smallest possible watchdog timeout setting
+ *
+ * @configure:		Function to send configuration command
+ * @restart:		Function to send "restart" command
+ */
+struct rave_sp_wdt_variant {
+	unsigned int max_timeout;
+	unsigned int min_timeout;
+
+	int (*configure)(struct watchdog_device *, bool);
+	int (*restart)(struct watchdog_device *);
+};
+
+/**
+ * struct rave_sp_wdt - RAVE SP watchdog
+ *
+ * @wdd:		Underlying watchdog device
+ * @sp:			Pointer to parent RAVE SP device
+ * @variant:		Device specific variant information
+ * @reboot_notifier:	Reboot notifier implementing machine reset
+ */
+struct rave_sp_wdt {
+	struct watchdog_device wdd;
+	struct rave_sp *sp;
+	const struct rave_sp_wdt_variant *variant;
+	struct notifier_block reboot_notifier;
+};
+
+static struct rave_sp_wdt *to_rave_sp_wdt(struct watchdog_device *wdd)
+{
+	return container_of(wdd, struct rave_sp_wdt, wdd);
+}
+
+static int rave_sp_wdt_exec(struct watchdog_device *wdd, void *data,
+			    size_t data_size)
+{
+	return rave_sp_exec(to_rave_sp_wdt(wdd)->sp,
+			    data, data_size, NULL, 0);
+}
+
+static int rave_sp_wdt_legacy_configure(struct watchdog_device *wdd, bool on)
+{
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_SW_WDT,
+		[1] = 0,
+		[2] = 0,
+		[3] = on,
+		[4] = on ? wdd->timeout : 0,
+	};
+
+	return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
+}
+
+static int rave_sp_wdt_rdu_configure(struct watchdog_device *wdd, bool on)
+{
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_SW_WDT,
+		[1] = 0,
+		[2] = on,
+		[3] = (u8)wdd->timeout,
+		[4] = (u8)(wdd->timeout >> 8),
+	};
+
+	return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
+}
+
+/**
+ * rave_sp_wdt_configure - Configure watchdog device
+ *
+ * @wdd:	Device to configure
+ * @on:		Desired state of the watchdog timer (ON/OFF)
+ *
+ * This function configures two aspects of the watchdog timer:
+ *
+ *  - Wheither it is ON or OFF
+ *  - Its timeout duration
+ *
+ * with first aspect specified via function argument and second via
+ * the value of 'wdd->timeout'.
+ */
+static int rave_sp_wdt_configure(struct watchdog_device *wdd, bool on)
+{
+	return to_rave_sp_wdt(wdd)->variant->configure(wdd, on);
+}
+
+static int rave_sp_wdt_legacy_restart(struct watchdog_device *wdd)
+{
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_RESET,
+		[1] = 0,
+		[2] = RAVE_SP_RESET_BYTE
+	};
+
+	return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
+}
+
+static int rave_sp_wdt_rdu_restart(struct watchdog_device *wdd)
+{
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_RESET,
+		[1] = 0,
+		[2] = RAVE_SP_RESET_BYTE,
+		[3] = RAVE_SP_RESET_REASON_NORMAL
+	};
+
+	return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
+}
+
+static int rave_sp_wdt_reboot_notifier(struct notifier_block *nb,
+				       unsigned long action, void *data)
+{
+	/*
+	 * Restart handler is called in atomic context which means we
+	 * can't communicate to SP via UART. Luckily for use SP will
+	 * wait 500ms before actually resetting us, so we ask it to do
+	 * so here and let the rest of the system go on wrapping
+	 * things up.
+	 */
+	if (action == SYS_DOWN || action == SYS_HALT) {
+		struct rave_sp_wdt *sp_wd =
+			container_of(nb, struct rave_sp_wdt, reboot_notifier);
+
+		const int ret = sp_wd->variant->restart(&sp_wd->wdd);
+
+		if (ret < 0)
+			dev_err(sp_wd->wdd.parent,
+				"Failed to issue restart command (%d)", ret);
+		return NOTIFY_OK;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int rave_sp_wdt_restart(struct watchdog_device *wdd,
+			       unsigned long action, void *data)
+{
+	/*
+	 * The actual work was done by reboot notifier above. SP
+	 * firmware waits 500 ms before issuing reset, so let's hang
+	 * here for twice that delay and hopefuly we'd never reach
+	 * the return statement.
+	 */
+	mdelay(2 * RAVE_SP_RESET_DELAY_MS);
+
+	return -EIO;
+}
+
+static int rave_sp_wdt_start(struct watchdog_device *wdd)
+{
+	int ret;
+
+	ret = rave_sp_wdt_configure(wdd, true);
+	if (!ret)
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+
+	return ret;
+}
+
+static int rave_sp_wdt_stop(struct watchdog_device *wdd)
+{
+	return rave_sp_wdt_configure(wdd, false);
+}
+
+static int rave_sp_wdt_set_timeout(struct watchdog_device *wdd,
+				   unsigned int timeout)
+{
+	wdd->timeout = timeout;
+
+	return rave_sp_wdt_configure(wdd, watchdog_active(wdd));
+}
+
+static int rave_sp_wdt_ping(struct watchdog_device *wdd)
+{
+	u8 cmd[] = {
+		[0] = RAVE_SP_CMD_PET_WDT,
+		[1] = 0,
+	};
+
+	return rave_sp_wdt_exec(wdd, cmd, sizeof(cmd));
+}
+
+static const struct watchdog_info rave_sp_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "RAVE SP Watchdog",
+};
+
+static const struct watchdog_ops rave_sp_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = rave_sp_wdt_start,
+	.stop = rave_sp_wdt_stop,
+	.ping = rave_sp_wdt_ping,
+	.set_timeout = rave_sp_wdt_set_timeout,
+	.restart = rave_sp_wdt_restart,
+};
+
+static const struct rave_sp_wdt_variant rave_sp_wdt_legacy = {
+	.max_timeout = 255,
+	.min_timeout = 1,
+	.configure = rave_sp_wdt_legacy_configure,
+	.restart   = rave_sp_wdt_legacy_restart,
+};
+
+static const struct rave_sp_wdt_variant rave_sp_wdt_rdu = {
+	.max_timeout = 180,
+	.min_timeout = 60,
+	.configure = rave_sp_wdt_rdu_configure,
+	.restart   = rave_sp_wdt_rdu_restart,
+};
+
+static const struct of_device_id rave_sp_wdt_of_match[] = {
+	{
+		.compatible = "zii,rave-sp-watchdog-legacy",
+		.data = &rave_sp_wdt_legacy,
+	},
+	{
+		.compatible = "zii,rave-sp-watchdog",
+		.data = &rave_sp_wdt_rdu,
+	},
+	{ /* sentinel */ }
+};
+
+static int rave_sp_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct watchdog_device *wdd;
+	struct rave_sp_wdt *sp_wd;
+	struct nvmem_cell *cell;
+	__le16 timeout = 0;
+	int ret;
+
+	sp_wd = devm_kzalloc(dev, sizeof(*sp_wd), GFP_KERNEL);
+	if (!sp_wd)
+		return -ENOMEM;
+
+	sp_wd->variant = of_device_get_match_data(dev);
+	sp_wd->sp      = dev_get_drvdata(dev->parent);
+
+	wdd              = &sp_wd->wdd;
+	wdd->parent      = dev;
+	wdd->info        = &rave_sp_wdt_info;
+	wdd->ops         = &rave_sp_wdt_ops;
+	wdd->min_timeout = sp_wd->variant->min_timeout;
+	wdd->max_timeout = sp_wd->variant->max_timeout;
+	wdd->status      = WATCHDOG_NOWAYOUT_INIT_STATUS;
+	wdd->timeout     = 60;
+
+	cell = nvmem_cell_get(dev, "wdt-timeout");
+	if (!IS_ERR(cell)) {
+		size_t len;
+		void *value = nvmem_cell_read(cell, &len);
+
+		if (!IS_ERR(value)) {
+			memcpy(&timeout, value, min(len, sizeof(timeout)));
+			kfree(value);
+		}
+		nvmem_cell_put(cell);
+	}
+	watchdog_init_timeout(wdd, le16_to_cpu(timeout), dev);
+	watchdog_set_restart_priority(wdd, 255);
+	watchdog_stop_on_unregister(wdd);
+
+	sp_wd->reboot_notifier.notifier_call = rave_sp_wdt_reboot_notifier;
+	ret = devm_register_reboot_notifier(dev, &sp_wd->reboot_notifier);
+	if (ret) {
+		dev_err(dev, "Failed to register reboot notifier\n");
+		return ret;
+	}
+
+	/*
+	 * We don't know if watchdog is running now. To be sure, let's
+	 * start it and depend on watchdog core to ping it
+	 */
+	wdd->max_hw_heartbeat_ms = wdd->max_timeout * 1000;
+	ret = rave_sp_wdt_start(wdd);
+	if (ret) {
+		dev_err(dev, "Watchdog didn't start\n");
+		return ret;
+	}
+
+	ret = devm_watchdog_register_device(dev, wdd);
+	if (ret) {
+		dev_err(dev, "Failed to register watchdog device\n");
+		rave_sp_wdt_stop(wdd);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct platform_driver rave_sp_wdt_driver = {
+	.probe = rave_sp_wdt_probe,
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = rave_sp_wdt_of_match,
+	},
+};
+
+module_platform_driver(rave_sp_wdt_driver);
+
+MODULE_DEVICE_TABLE(of, rave_sp_wdt_of_match);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrey Vostrikov <andrey.vostrikov@cogentembedded.com>");
+MODULE_AUTHOR("Nikita Yushchenko <nikita.yoush@cogentembedded.com>");
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("RAVE SP Watchdog driver");
+MODULE_ALIAS("platform:rave-sp-watchdog");

include/linux/crc-ccitt.h

@@ -5,12 +5,19 @@
 #include <linux/types.h>
 
 extern u16 const crc_ccitt_table[256];
+extern u16 const crc_ccitt_false_table[256];
 
 extern u16 crc_ccitt(u16 crc, const u8 *buffer, size_t len);
+extern u16 crc_ccitt_false(u16 crc, const u8 *buffer, size_t len);
 
 static inline u16 crc_ccitt_byte(u16 crc, const u8 c)
 {
 	return (crc >> 8) ^ crc_ccitt_table[(crc ^ c) & 0xff];
 }
 
+static inline u16 crc_ccitt_false_byte(u16 crc, const u8 c)
+{
+    return (crc << 8) ^ crc_ccitt_false_table[(crc >> 8) ^ c];
+}
+
 #endif /* _LINUX_CRC_CCITT_H */

include/linux/mfd/axp20x.h

@@ -645,11 +645,6 @@ struct axp20x_dev {
 	const struct regmap_irq_chip	*regmap_irq_chip;
 };
 
-struct axp288_extcon_pdata {
-	/* GPIO pin control to switch D+/D- lines b/w PMIC and SOC */
-	struct gpio_desc *gpio_mux_cntl;
-};
-
 /* generic helper function for reading 9-16 bit wide regs */
 static inline int axp20x_read_variable_width(struct regmap *regmap,
 	unsigned int reg, unsigned int width)

include/linux/mfd/cros_ec.h

@@ -322,6 +322,10 @@ extern struct attribute_group cros_ec_attr_group;
 extern struct attribute_group cros_ec_lightbar_attr_group;
 extern struct attribute_group cros_ec_vbc_attr_group;
 
+/* debugfs stuff */
+int cros_ec_debugfs_init(struct cros_ec_dev *ec);
+void cros_ec_debugfs_remove(struct cros_ec_dev *ec);
+
 /* ACPI GPE handler */
 #ifdef CONFIG_ACPI
 

include/linux/mfd/cros_ec_commands.h

@@ -2904,16 +2904,33 @@ enum usb_pd_control_mux {
 	USB_PD_CTRL_MUX_AUTO = 5,
 };
 
+enum usb_pd_control_swap {
+	USB_PD_CTRL_SWAP_NONE = 0,
+	USB_PD_CTRL_SWAP_DATA = 1,
+	USB_PD_CTRL_SWAP_POWER = 2,
+	USB_PD_CTRL_SWAP_VCONN = 3,
+	USB_PD_CTRL_SWAP_COUNT
+};
+
 struct ec_params_usb_pd_control {
 	uint8_t port;
 	uint8_t role;
 	uint8_t mux;
+	uint8_t swap;
 } __packed;
 
 #define PD_CTRL_RESP_ENABLED_COMMS      (1 << 0) /* Communication enabled */
 #define PD_CTRL_RESP_ENABLED_CONNECTED  (1 << 1) /* Device connected */
 #define PD_CTRL_RESP_ENABLED_PD_CAPABLE (1 << 2) /* Partner is PD capable */
 
+#define PD_CTRL_RESP_ROLE_POWER         BIT(0) /* 0=SNK/1=SRC */
+#define PD_CTRL_RESP_ROLE_DATA          BIT(1) /* 0=UFP/1=DFP */
+#define PD_CTRL_RESP_ROLE_VCONN         BIT(2) /* Vconn status */
+#define PD_CTRL_RESP_ROLE_DR_POWER      BIT(3) /* Partner is dualrole power */
+#define PD_CTRL_RESP_ROLE_DR_DATA       BIT(4) /* Partner is dualrole data */
+#define PD_CTRL_RESP_ROLE_USB_COMM      BIT(5) /* Partner USB comm capable */
+#define PD_CTRL_RESP_ROLE_EXT_POWERED   BIT(6) /* Partner externally powerd */
+
 struct ec_response_usb_pd_control_v1 {
 	uint8_t enabled;
 	uint8_t role;

include/linux/mfd/palmas.h

@@ -3733,6 +3733,9 @@ enum usb_irq_events {
 #define TPS65917_REGEN3_CTRL_MODE_ACTIVE			0x01
 #define TPS65917_REGEN3_CTRL_MODE_ACTIVE_SHIFT			0x00
 
+/* POWERHOLD Mask field for PRIMARY_SECONDARY_PAD2 register */
+#define TPS65917_PRIMARY_SECONDARY_PAD2_GPIO_5_MASK		0xC
+
 /* Registers for function RESOURCE */
 #define TPS65917_REGEN1_CTRL					0x2
 #define TPS65917_PLLEN_CTRL					0x3

include/linux/mfd/rave-sp.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+
+/*
+ * Core definitions for RAVE SP MFD driver.
+ *
+ * Copyright (C) 2017 Zodiac Inflight Innovations
+ */
+
+#ifndef _LINUX_RAVE_SP_H_
+#define _LINUX_RAVE_SP_H_
+
+#include <linux/notifier.h>
+
+enum rave_sp_command {
+	RAVE_SP_CMD_GET_FIRMWARE_VERSION	= 0x20,
+	RAVE_SP_CMD_GET_BOOTLOADER_VERSION	= 0x21,
+	RAVE_SP_CMD_BOOT_SOURCE			= 0x26,
+	RAVE_SP_CMD_GET_BOARD_COPPER_REV	= 0x2B,
+	RAVE_SP_CMD_GET_GPIO_STATE		= 0x2F,
+
+	RAVE_SP_CMD_STATUS			= 0xA0,
+	RAVE_SP_CMD_SW_WDT			= 0xA1,
+	RAVE_SP_CMD_PET_WDT			= 0xA2,
+	RAVE_SP_CMD_RESET			= 0xA7,
+	RAVE_SP_CMD_RESET_REASON		= 0xA8,
+
+	RAVE_SP_CMD_REQ_COPPER_REV		= 0xB6,
+	RAVE_SP_CMD_GET_I2C_DEVICE_STATUS	= 0xBA,
+	RAVE_SP_CMD_GET_SP_SILICON_REV		= 0xB9,
+	RAVE_SP_CMD_CONTROL_EVENTS		= 0xBB,
+
+	RAVE_SP_EVNT_BASE			= 0xE0,
+};
+
+struct rave_sp;
+
+static inline unsigned long rave_sp_action_pack(u8 event, u8 value)
+{
+	return ((unsigned long)value << 8) | event;
+}
+
+static inline u8 rave_sp_action_unpack_event(unsigned long action)
+{
+	return action;
+}
+
+static inline u8 rave_sp_action_unpack_value(unsigned long action)
+{
+	return action >> 8;
+}
+
+int rave_sp_exec(struct rave_sp *sp,
+		 void *__data,  size_t data_size,
+		 void *reply_data, size_t reply_data_size);
+
+struct device;
+int devm_rave_sp_register_event_notifier(struct device *dev,
+					 struct notifier_block *nb);
+
+#endif /* _LINUX_RAVE_SP_H_ */

include/linux/mfd/stm32-lptimer.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * STM32 Low-Power Timer parent driver.
- *
  * Copyright (C) STMicroelectronics 2017
- *
  * Author: Fabrice Gasnier <fabrice.gasnier@st.com>
- *
  * Inspired by Benjamin Gaignard's stm32-timers driver
- *
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _LINUX_STM32_LPTIMER_H_

include/linux/mfd/stm32-timers.h

+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) STMicroelectronics 2016
- *
  * Author: Benjamin Gaignard <benjamin.gaignard@st.com>
- *
- * License terms:  GNU General Public License (GPL), version 2
  */
 
 #ifndef _LINUX_STM32_GPTIMER_H_

include/linux/mfd/tmio.h

@@ -25,26 +25,6 @@
 		writew((val) >> 16, (addr) + 2); \
 	} while (0)
 
-#define CNF_CMD     0x04
-#define CNF_CTL_BASE   0x10
-#define CNF_INT_PIN  0x3d
-#define CNF_STOP_CLK_CTL 0x40
-#define CNF_GCLK_CTL 0x41
-#define CNF_SD_CLK_MODE 0x42
-#define CNF_PIN_STATUS 0x44
-#define CNF_PWR_CTL_1 0x48
-#define CNF_PWR_CTL_2 0x49
-#define CNF_PWR_CTL_3 0x4a
-#define CNF_CARD_DETECT_MODE 0x4c
-#define CNF_SD_SLOT 0x50
-#define CNF_EXT_GCLK_CTL_1 0xf0
-#define CNF_EXT_GCLK_CTL_2 0xf1
-#define CNF_EXT_GCLK_CTL_3 0xf9
-#define CNF_SD_LED_EN_1 0xfa
-#define CNF_SD_LED_EN_2 0xfe
-
-#define   SDCREN 0x2   /* Enable access to MMC CTL regs. (flag in COMMAND_REG)*/
-
 #define sd_config_write8(base, shift, reg, val) \
 	tmio_iowrite8((val), (base) + ((reg) << (shift)))
 #define sd_config_write16(base, shift, reg, val) \

include/linux/serdev.h

@@ -193,6 +193,7 @@ static inline int serdev_controller_receive_buf(struct serdev_controller *ctrl,
 
 int serdev_device_open(struct serdev_device *);
 void serdev_device_close(struct serdev_device *);
+int devm_serdev_device_open(struct device *, struct serdev_device *);
 unsigned int serdev_device_set_baudrate(struct serdev_device *, unsigned int);
 void serdev_device_set_flow_control(struct serdev_device *, bool);
 int serdev_device_write_buf(struct serdev_device *, const unsigned char *, size_t);

lib/crc-ccitt.c

@@ -51,8 +51,49 @@ u16 const crc_ccitt_table[256] = {
 };
 EXPORT_SYMBOL(crc_ccitt_table);
 
+/*
+ * Similar table to calculate CRC16 variant known as CRC-CCITT-FALSE
+ * Reflected bits order, does not augment final value.
+ */
+u16 const crc_ccitt_false_table[256] = {
+    0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50A5, 0x60C6, 0x70E7,
+    0x8108, 0x9129, 0xA14A, 0xB16B, 0xC18C, 0xD1AD, 0xE1CE, 0xF1EF,
+    0x1231, 0x0210, 0x3273, 0x2252, 0x52B5, 0x4294, 0x72F7, 0x62D6,
+    0x9339, 0x8318, 0xB37B, 0xA35A, 0xD3BD, 0xC39C, 0xF3FF, 0xE3DE,
+    0x2462, 0x3443, 0x0420, 0x1401, 0x64E6, 0x74C7, 0x44A4, 0x5485,
+    0xA56A, 0xB54B, 0x8528, 0x9509, 0xE5EE, 0xF5CF, 0xC5AC, 0xD58D,
+    0x3653, 0x2672, 0x1611, 0x0630, 0x76D7, 0x66F6, 0x5695, 0x46B4,
+    0xB75B, 0xA77A, 0x9719, 0x8738, 0xF7DF, 0xE7FE, 0xD79D, 0xC7BC,
+    0x48C4, 0x58E5, 0x6886, 0x78A7, 0x0840, 0x1861, 0x2802, 0x3823,
+    0xC9CC, 0xD9ED, 0xE98E, 0xF9AF, 0x8948, 0x9969, 0xA90A, 0xB92B,
+    0x5AF5, 0x4AD4, 0x7AB7, 0x6A96, 0x1A71, 0x0A50, 0x3A33, 0x2A12,
+    0xDBFD, 0xCBDC, 0xFBBF, 0xEB9E, 0x9B79, 0x8B58, 0xBB3B, 0xAB1A,
+    0x6CA6, 0x7C87, 0x4CE4, 0x5CC5, 0x2C22, 0x3C03, 0x0C60, 0x1C41,
+    0xEDAE, 0xFD8F, 0xCDEC, 0xDDCD, 0xAD2A, 0xBD0B, 0x8D68, 0x9D49,
+    0x7E97, 0x6EB6, 0x5ED5, 0x4EF4, 0x3E13, 0x2E32, 0x1E51, 0x0E70,
+    0xFF9F, 0xEFBE, 0xDFDD, 0xCFFC, 0xBF1B, 0xAF3A, 0x9F59, 0x8F78,
+    0x9188, 0x81A9, 0xB1CA, 0xA1EB, 0xD10C, 0xC12D, 0xF14E, 0xE16F,
+    0x1080, 0x00A1, 0x30C2, 0x20E3, 0x5004, 0x4025, 0x7046, 0x6067,
+    0x83B9, 0x9398, 0xA3FB, 0xB3DA, 0xC33D, 0xD31C, 0xE37F, 0xF35E,
+    0x02B1, 0x1290, 0x22F3, 0x32D2, 0x4235, 0x5214, 0x6277, 0x7256,
+    0xB5EA, 0xA5CB, 0x95A8, 0x8589, 0xF56E, 0xE54F, 0xD52C, 0xC50D,
+    0x34E2, 0x24C3, 0x14A0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
+    0xA7DB, 0xB7FA, 0x8799, 0x97B8, 0xE75F, 0xF77E, 0xC71D, 0xD73C,
+    0x26D3, 0x36F2, 0x0691, 0x16B0, 0x6657, 0x7676, 0x4615, 0x5634,
+    0xD94C, 0xC96D, 0xF90E, 0xE92F, 0x99C8, 0x89E9, 0xB98A, 0xA9AB,
+    0x5844, 0x4865, 0x7806, 0x6827, 0x18C0, 0x08E1, 0x3882, 0x28A3,
+    0xCB7D, 0xDB5C, 0xEB3F, 0xFB1E, 0x8BF9, 0x9BD8, 0xABBB, 0xBB9A,
+    0x4A75, 0x5A54, 0x6A37, 0x7A16, 0x0AF1, 0x1AD0, 0x2AB3, 0x3A92,
+    0xFD2E, 0xED0F, 0xDD6C, 0xCD4D, 0xBDAA, 0xAD8B, 0x9DE8, 0x8DC9,
+    0x7C26, 0x6C07, 0x5C64, 0x4C45, 0x3CA2, 0x2C83, 0x1CE0, 0x0CC1,
+    0xEF1F, 0xFF3E, 0xCF5D, 0xDF7C, 0xAF9B, 0xBFBA, 0x8FD9, 0x9FF8,
+    0x6E17, 0x7E36, 0x4E55, 0x5E74, 0x2E93, 0x3EB2, 0x0ED1, 0x1EF0
+};
+EXPORT_SYMBOL(crc_ccitt_false_table);
+
 /**
- *	crc_ccitt - recompute the CRC for the data buffer
+ *	crc_ccitt - recompute the CRC (CRC-CCITT variant) for the data
+ *	buffer
  *	@crc: previous CRC value
  *	@buffer: data pointer
  *	@len: number of bytes in the buffer
@@ -65,5 +106,20 @@ u16 crc_ccitt(u16 crc, u8 const *buffer, size_t len)
 }
 EXPORT_SYMBOL(crc_ccitt);
 
+/**
+ *	crc_ccitt_false - recompute the CRC (CRC-CCITT-FALSE variant)
+ *	for the data buffer
+ *	@crc: previous CRC value
+ *	@buffer: data pointer
+ *	@len: number of bytes in the buffer
+ */
+u16 crc_ccitt_false(u16 crc, u8 const *buffer, size_t len)
+{
+	while (len--)
+		crc = crc_ccitt_false_byte(crc, *buffer++);
+	return crc;
+}
+EXPORT_SYMBOL(crc_ccitt_false);
+
 MODULE_DESCRIPTION("CRC-CCITT calculations");
 MODULE_LICENSE("GPL");