Merge tag 'mips_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull a few more MIPS updates from Paul Burton:
 "Some SGI IP27 specific PCI rework and a batch of fixes:

   - A build fix for BMIPS5000 configurations with
     CONFIG_HW_PERF_EVENTS=y, which also neatly removes some #ifdefery.

   - A fix to report supported ISAs correctly on older Ingenic SoCs
     which incorrectly indicate MIPSr2 support in their cop0 Config
     register.

   - Some PCI modernization for SGI IP27 systems as part of ongoing work
     to support some other SGI systems.

   - A fix allowing use of appended DTB files with generic kernels.

   - DMA mask fixes for SGI IP22 & Alchemy systems"

* tag 'mips_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Alchemy: add DMA masks for on-chip ethernet
  MIPS: SGI-IP22: provide missing dma_mask/coherent_dma_mask
  generic: fix appended dtb support
  MIPS: SGI-IP27: abstract chipset irq from bridge
  MIPS: SGI-IP27: use generic PCI driver
  MIPS: Fix Ingenic SoCs sometimes reporting wrong ISA
  MIPS: perf: Fix build with CONFIG_CPU_BMIPS5000 enabled

arch/mips/Kconfig

@@ -674,7 +674,10 @@ config SGI_IP27
 	select SYS_HAS_EARLY_PRINTK
 	select HAVE_PCI
 	select IRQ_MIPS_CPU
+	select IRQ_DOMAIN_HIERARCHY
 	select NR_CPUS_DEFAULT_64
+	select PCI_DRIVERS_GENERIC
+	select PCI_XTALK_BRIDGE
 	select SYS_HAS_CPU_R10000
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -1241,6 +1244,9 @@ config IRQ_GT641XX
 config PCI_GT64XXX_PCI0
 	bool
 
+config PCI_XTALK_BRIDGE
+	bool
+
 config NO_EXCEPT_FILL
 	bool
 

arch/mips/alchemy/common/platform.c

@@ -131,9 +131,7 @@ static void __init alchemy_setup_uarts(int ctype)
 }
 
 
-/* The dmamask must be set for OHCI/EHCI to work */
-static u64 alchemy_ohci_dmamask = DMA_BIT_MASK(32);
-static u64 __maybe_unused alchemy_ehci_dmamask = DMA_BIT_MASK(32);
+static u64 alchemy_all_dmamask = DMA_BIT_MASK(32);
 
 /* Power on callback for the ehci platform driver */
 static int alchemy_ehci_power_on(struct platform_device *pdev)
@@ -231,7 +229,7 @@ static void __init alchemy_setup_usb(int ctype)
 	res[1].flags = IORESOURCE_IRQ;
 	pdev->name = "ohci-platform";
 	pdev->id = 0;
-	pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+	pdev->dev.dma_mask = &alchemy_all_dmamask;
 	pdev->dev.platform_data = &alchemy_ohci_pdata;
 
 	if (platform_device_register(pdev))
@@ -251,7 +249,7 @@ static void __init alchemy_setup_usb(int ctype)
 		res[1].flags = IORESOURCE_IRQ;
 		pdev->name = "ehci-platform";
 		pdev->id = 0;
-		pdev->dev.dma_mask = &alchemy_ehci_dmamask;
+		pdev->dev.dma_mask = &alchemy_all_dmamask;
 		pdev->dev.platform_data = &alchemy_ehci_pdata;
 
 		if (platform_device_register(pdev))
@@ -271,7 +269,7 @@ static void __init alchemy_setup_usb(int ctype)
 		res[1].flags = IORESOURCE_IRQ;
 		pdev->name = "ohci-platform";
 		pdev->id = 1;
-		pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+		pdev->dev.dma_mask = &alchemy_all_dmamask;
 		pdev->dev.platform_data = &alchemy_ohci_pdata;
 
 		if (platform_device_register(pdev))
@@ -338,7 +336,11 @@ static struct platform_device au1xxx_eth0_device = {
 	.name		= "au1000-eth",
 	.id		= 0,
 	.num_resources	= MAC_RES_COUNT,
-	.dev.platform_data = &au1xxx_eth0_platform_data,
+	.dev = {
+		.dma_mask               = &alchemy_all_dmamask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+		.platform_data          = &au1xxx_eth0_platform_data,
+	},
 };
 
 static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = {
@@ -370,7 +372,11 @@ static struct platform_device au1xxx_eth1_device = {
 	.name		= "au1000-eth",
 	.id		= 1,
 	.num_resources	= MAC_RES_COUNT,
-	.dev.platform_data = &au1xxx_eth1_platform_data,
+	.dev = {
+		.dma_mask               = &alchemy_all_dmamask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+		.platform_data          = &au1xxx_eth1_platform_data,
+	},
 };
 
 void __init au1xxx_override_eth_cfg(unsigned int port,

arch/mips/generic/init.c

@@ -43,14 +43,14 @@ void __init *plat_get_fdt(void)
 		/* Already set up */
 		return (void *)fdt;
 
-	if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_arg1)) {
+	if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_passed_dtb)) {
 		/*
 		 * We booted using the UHI boot protocol, so we have been
 		 * provided with the appropriate device tree for the board.
 		 * Make use of it & search for any machine struct based upon
 		 * the root compatible string.
 		 */
-		fdt = (void *)fw_arg1;
+		fdt = (void *)fw_passed_dtb;
 
 		for_each_mips_machine(check_mach) {
 			match = mips_machine_is_compatible(check_mach, fdt);

arch/mips/include/asm/mach-ip27/topology.h

@@ -7,18 +7,9 @@
 #include <asm/mmzone.h>
 
 struct cpuinfo_ip27 {
-//	cpuid_t		p_cpuid;	/* PROM assigned cpuid */
 	cnodeid_t	p_nodeid;	/* my node ID in compact-id-space */
 	nasid_t		p_nasid;	/* my node ID in numa-as-id-space */
 	unsigned char	p_slice;	/* Physical position on node board */
-#if 0
-	unsigned long		loops_per_sec;
-	unsigned long		ipi_count;
-	unsigned long		irq_attempt[NR_IRQS];
-	unsigned long		smp_local_irq_count;
-	unsigned long		prof_multiplier;
-	unsigned long		prof_counter;
-#endif
 };
 
 extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
@@ -30,7 +21,7 @@ extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
 struct pci_bus;
 extern int pcibus_to_node(struct pci_bus *);
 
-#define cpumask_of_pcibus(bus)	(cpu_online_mask)
+#define cpumask_of_pcibus(bus)	(cpumask_of_node(pcibus_to_node(bus)))
 
 extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
 

arch/mips/include/asm/pci/bridge.h

@@ -801,15 +801,13 @@ struct bridge_err_cmdword {
 #define PCI64_ATTR_RMF_SHFT	48
 
 struct bridge_controller {
-	struct pci_controller	pc;
-	struct resource		mem;
-	struct resource		io;
 	struct resource		busn;
 	struct bridge_regs	*base;
-	nasid_t			nasid;
-	unsigned int		widget_id;
-	u64			baddr;
+	unsigned long		baddr;
+	unsigned long		intr_addr;
+	struct irq_domain	*domain;
 	unsigned int		pci_int[8];
+	nasid_t			nasid;
 };
 
 #define BRIDGE_CONTROLLER(bus) \
@@ -822,8 +820,4 @@ struct bridge_controller {
 #define bridge_clr(bc, reg, val)	\
 	__raw_writel(__raw_readl(&bc->base->reg) & ~(val), &bc->base->reg)
 
-extern int request_bridge_irq(struct bridge_controller *bc, int pin);
-
-extern struct pci_ops bridge_pci_ops;
-
 #endif /* _ASM_PCI_BRIDGE_H */

arch/mips/include/asm/sn/irq_alloc.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SN_IRQ_ALLOC_H
+#define __ASM_SN_IRQ_ALLOC_H
+
+struct irq_alloc_info {
+	void *ctrl;
+	nasid_t nasid;
+	int pin;
+};
+
+#endif /* __ASM_SN_IRQ_ALLOC_H */

arch/mips/include/asm/xtalk/xtalk.h

@@ -47,15 +47,6 @@ typedef struct xtalk_piomap_s *xtalk_piomap_t;
 #define XIO_PORT(x)	((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT))
 #define XIO_PACK(p, o)	((((uint64_t)(p))<<XIO_PORT_SHIFT) | ((o)&XIO_ADDR_BITS))
 
-#ifdef CONFIG_PCI
-extern int bridge_probe(nasid_t nasid, int widget, int masterwid);
-#else
-static inline int bridge_probe(nasid_t nasid, int widget, int masterwid)
-{
-	return 0;
-}
-#endif
-
 #endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_XTALK_XTALK_H */

arch/mips/kernel/cpu-probe.c

@@ -1973,6 +1973,14 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
 		panic("Unknown Ingenic Processor ID!");
 		break;
 	}
+
+	/*
+	 * The config0 register in the Xburst CPUs with a processor ID of
+	 * PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible,
+	 * but they don't actually support this ISA.
+	 */
+	if ((c->processor_id & PRID_COMP_MASK) == PRID_COMP_INGENIC_D0)
+		c->isa_level &= ~MIPS_CPU_ISA_M32R2;
 }
 
 static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)

arch/mips/kernel/perf_event_mipsxx.c

@@ -64,17 +64,11 @@ struct mips_perf_event {
 	#define CNTR_EVEN	0x55555555
 	#define CNTR_ODD	0xaaaaaaaa
 	#define CNTR_ALL	0xffffffff
-#ifdef CONFIG_MIPS_MT_SMP
 	enum {
 		T  = 0,
 		V  = 1,
 		P  = 2,
 	} range;
-#else
-	#define T
-	#define V
-	#define P
-#endif
 };
 
 static struct mips_perf_event raw_event;
@@ -325,9 +319,7 @@ static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
 {
 	struct perf_event *event = container_of(evt, struct perf_event, hw);
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-#ifdef CONFIG_MIPS_MT_SMP
 	unsigned int range = evt->event_base >> 24;
-#endif /* CONFIG_MIPS_MT_SMP */
 
 	WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
 
@@ -336,21 +328,15 @@ static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
 		/* Make sure interrupt enabled. */
 		MIPS_PERFCTRL_IE;
 
-#ifdef CONFIG_CPU_BMIPS5000
-	{
+	if (IS_ENABLED(CONFIG_CPU_BMIPS5000)) {
 		/* enable the counter for the calling thread */
 		cpuc->saved_ctrl[idx] |=
 			(1 << (12 + vpe_id())) | BRCM_PERFCTRL_TC;
-	}
-#else
-#ifdef CONFIG_MIPS_MT_SMP
-	if (range > V) {
+	} else if (IS_ENABLED(CONFIG_MIPS_MT_SMP) && range > V) {
 		/* The counter is processor wide. Set it up to count all TCs. */
 		pr_debug("Enabling perf counter for all TCs\n");
 		cpuc->saved_ctrl[idx] |= M_TC_EN_ALL;
-	} else
-#endif /* CONFIG_MIPS_MT_SMP */
-	{
+	} else {
 		unsigned int cpu, ctrl;
 
 		/*
@@ -365,7 +351,6 @@ static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
 		cpuc->saved_ctrl[idx] |= ctrl;
 		pr_debug("Enabling perf counter for CPU%d\n", cpu);
 	}
-#endif /* CONFIG_CPU_BMIPS5000 */
 	/*
 	 * We do not actually let the counter run. Leave it until start().
 	 */

arch/mips/pci/Makefile

@@ -26,6 +26,7 @@ obj-$(CONFIG_PCI_AR2315)	+= pci-ar2315.o
 obj-$(CONFIG_SOC_AR71XX)	+= pci-ar71xx.o
 obj-$(CONFIG_PCI_AR724X)	+= pci-ar724x.o
 obj-$(CONFIG_MIPS_PCI_VIRTIO)	+= pci-virtio-guest.o
+obj-$(CONFIG_PCI_XTALK_BRIDGE)	+= pci-xtalk-bridge.o
 #
 # These are still pretty much in the old state, watch, go blind.
 #
@@ -39,7 +40,7 @@ obj-$(CONFIG_MIPS_MALTA)	+= fixup-malta.o pci-malta.o
 obj-$(CONFIG_PMC_MSP7120_GW)	+= fixup-pmcmsp.o ops-pmcmsp.o
 obj-$(CONFIG_PMC_MSP7120_EVAL)	+= fixup-pmcmsp.o ops-pmcmsp.o
 obj-$(CONFIG_PMC_MSP7120_FPGA)	+= fixup-pmcmsp.o ops-pmcmsp.o
-obj-$(CONFIG_SGI_IP27)		+= ops-bridge.o pci-ip27.o
+obj-$(CONFIG_SGI_IP27)		+= pci-ip27.o
 obj-$(CONFIG_SGI_IP32)		+= fixup-ip32.o ops-mace.o pci-ip32.o
 obj-$(CONFIG_SIBYTE_SB1250)	+= fixup-sb1250.o pci-sb1250.o
 obj-$(CONFIG_SIBYTE_BCM112X)	+= fixup-sb1250.o pci-sb1250.o

arch/mips/pci/pci-ip27.c

@@ -7,162 +7,7 @@
  * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <linux/smp.h>
-#include <linux/dma-direct.h>
-#include <asm/sn/arch.h>
 #include <asm/pci/bridge.h>
-#include <asm/paccess.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn0/hub.h>
-
-/*
- * Max #PCI busses we can handle; ie, max #PCI bridges.
- */
-#define MAX_PCI_BUSSES		40
-
-/*
- * XXX: No kmalloc available when we do our crosstalk scan,
- *	we should try to move it later in the boot process.
- */
-static struct bridge_controller bridges[MAX_PCI_BUSSES];
-
-extern struct pci_ops bridge_pci_ops;
-
-int bridge_probe(nasid_t nasid, int widget_id, int masterwid)
-{
-	unsigned long offset = NODE_OFFSET(nasid);
-	struct bridge_controller *bc;
-	static int num_bridges = 0;
-	int slot;
-
-	pci_set_flags(PCI_PROBE_ONLY);
-
-	printk("a bridge\n");
-
-	/* XXX: kludge alert.. */
-	if (!num_bridges)
-		ioport_resource.end = ~0UL;
-
-	bc = &bridges[num_bridges];
-
-	bc->pc.pci_ops		= &bridge_pci_ops;
-	bc->pc.mem_resource	= &bc->mem;
-	bc->pc.io_resource	= &bc->io;
-
-	bc->pc.index		= num_bridges;
-
-	bc->mem.name		= "Bridge PCI MEM";
-	bc->pc.mem_offset	= offset;
-	bc->mem.start		= 0;
-	bc->mem.end		= ~0UL;
-	bc->mem.flags		= IORESOURCE_MEM;
-
-	bc->io.name		= "Bridge IO MEM";
-	bc->pc.io_offset	= offset;
-	bc->io.start		= 0UL;
-	bc->io.end		= ~0UL;
-	bc->io.flags		= IORESOURCE_IO;
-
-	bc->widget_id = widget_id;
-	bc->nasid = nasid;
-
-	bc->baddr = (u64)masterwid << 60 | PCI64_ATTR_BAR;
-
-	/*
-	 * point to this bridge
-	 */
-	bc->base = (struct bridge_regs *)RAW_NODE_SWIN_BASE(nasid, widget_id);
-
-	/*
-	 * Clear all pending interrupts.
-	 */
-	bridge_write(bc, b_int_rst_stat, BRIDGE_IRR_ALL_CLR);
-
-	/*
-	 * Until otherwise set up, assume all interrupts are from slot 0
-	 */
-	bridge_write(bc, b_int_device, 0x0);
-
-	/*
-	 * swap pio's to pci mem and io space (big windows)
-	 */
-	bridge_set(bc, b_wid_control, BRIDGE_CTRL_IO_SWAP |
-				      BRIDGE_CTRL_MEM_SWAP);
-#ifdef CONFIG_PAGE_SIZE_4KB
-	bridge_clr(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
-#else /* 16kB or larger */
-	bridge_set(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
-#endif
-
-	/*
-	 * Hmm...  IRIX sets additional bits in the address which
-	 * are documented as reserved in the bridge docs.
-	 */
-	bridge_write(bc, b_wid_int_upper, 0x8000 | (masterwid << 16));
-	bridge_write(bc, b_wid_int_lower, 0x01800090); /* PI_INT_PEND_MOD off*/
-	bridge_write(bc, b_dir_map, (masterwid << 20));	/* DMA */
-	bridge_write(bc, b_int_enable, 0);
-
-	for (slot = 0; slot < 8; slot ++) {
-		bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
-		bc->pci_int[slot] = -1;
-	}
-	bridge_read(bc, b_wid_tflush);	  /* wait until Bridge PIO complete */
-
-	register_pci_controller(&bc->pc);
-
-	num_bridges++;
-
-	return 0;
-}
-
-/*
- * All observed requests have pin == 1. We could have a global here, that
- * gets incremented and returned every time - unfortunately, pci_map_irq
- * may be called on the same device over and over, and need to return the
- * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7].
- *
- * A given PCI device, in general, should be able to intr any of the cpus
- * on any one of the hubs connected to its xbow.
- */
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return 0;
-}
-
-static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev)
-{
-	while (dev->bus->parent) {
-		/* Move up the chain of bridges. */
-		dev = dev->bus->self;
-	}
-
-	return dev;
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
-	struct pci_dev *rdev = bridge_root_dev(dev);
-	int slot = PCI_SLOT(rdev->devfn);
-	int irq;
-
-	irq = bc->pci_int[slot];
-	if (irq == -1) {
-		irq = request_bridge_irq(bc, slot);
-		if (irq < 0)
-			return irq;
-
-		bc->pci_int[slot] = irq;
-	}
-	dev->irq = irq;
-
-	return 0;
-}
 
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
@@ -177,29 +22,6 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
 	return dma_addr & ~(0xffUL << 56);
 }
 
-/*
- * Device might live on a subordinate PCI bus.	XXX Walk up the chain of buses
- * to find the slot number in sense of the bridge device register.
- * XXX This also means multiple devices might rely on conflicting bridge
- * settings.
- */
-
-static inline void pci_disable_swapping(struct pci_dev *dev)
-{
-	struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
-	struct bridge_regs *bridge = bc->base;
-	int slot = PCI_SLOT(dev->devfn);
-
-	/* Turn off byte swapping */
-	bridge->b_device[slot].reg &= ~BRIDGE_DEV_SWAP_DIR;
-	bridge->b_widget.w_tflush;	/* Flush */
-}
-
-static void pci_fixup_ioc3(struct pci_dev *d)
-{
-	pci_disable_swapping(d);
-}
-
 #ifdef CONFIG_NUMA
 int pcibus_to_node(struct pci_bus *bus)
 {
@@ -209,6 +31,3 @@ int pcibus_to_node(struct pci_bus *bus)
 }
 EXPORT_SYMBOL(pcibus_to_node);
 #endif /* CONFIG_NUMA */
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
-	pci_fixup_ioc3);

arch/mips/sgi-ip22/ip22-platform.c

@@ -3,6 +3,7 @@
 #include <linux/if_ether.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/paccess.h>
 #include <asm/sgi/ip22.h>
@@ -25,6 +26,8 @@ static struct sgiwd93_platform_data sgiwd93_0_pd = {
 	.irq	= SGI_WD93_0_IRQ,
 };
 
+static u64 sgiwd93_0_dma_mask = DMA_BIT_MASK(32);
+
 static struct platform_device sgiwd93_0_device = {
 	.name		= "sgiwd93",
 	.id		= 0,
@@ -32,6 +35,8 @@ static struct platform_device sgiwd93_0_device = {
 	.resource	= sgiwd93_0_resources,
 	.dev = {
 		.platform_data = &sgiwd93_0_pd,
+		.dma_mask = &sgiwd93_0_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
@@ -49,6 +54,8 @@ static struct sgiwd93_platform_data sgiwd93_1_pd = {
 	.irq	= SGI_WD93_1_IRQ,
 };
 
+static u64 sgiwd93_1_dma_mask = DMA_BIT_MASK(32);
+
 static struct platform_device sgiwd93_1_device = {
 	.name		= "sgiwd93",
 	.id		= 1,
@@ -56,6 +63,8 @@ static struct platform_device sgiwd93_1_device = {
 	.resource	= sgiwd93_1_resources,
 	.dev = {
 		.platform_data = &sgiwd93_1_pd,
+		.dma_mask = &sgiwd93_1_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
@@ -96,6 +105,8 @@ static struct resource sgiseeq_0_resources[] = {
 
 static struct sgiseeq_platform_data eth0_pd;
 
+static u64 sgiseeq_dma_mask = DMA_BIT_MASK(32);
+
 static struct platform_device eth0_device = {
 	.name		= "sgiseeq",
 	.id		= 0,
@@ -103,6 +114,8 @@ static struct platform_device eth0_device = {
 	.resource	= sgiseeq_0_resources,
 	.dev = {
 		.platform_data = &eth0_pd,
+		.dma_mask = &sgiseeq_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 

arch/mips/sgi-ip27/ip27-init.c

@@ -184,5 +184,7 @@ void __init plat_mem_setup(void)
 
 	ioc3_eth_init();
 
+	ioport_resource.start = 0;
+	ioport_resource.end = ~0UL;
 	set_io_port_base(IO_BASE);
 }

arch/mips/sgi-ip27/ip27-irq.c

@@ -12,22 +12,20 @@
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/bitops.h>
+#include <linux/sched.h>
 
 #include <asm/io.h>
 #include <asm/irq_cpu.h>
-#include <asm/pci/bridge.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/agent.h>
 #include <asm/sn/arch.h>
 #include <asm/sn/hub.h>
 #include <asm/sn/intr.h>
+#include <asm/sn/irq_alloc.h>
 
 struct hub_irq_data {
-	struct bridge_controller *bc;
 	u64	*irq_mask[2];
 	cpuid_t	cpu;
-	int	bit;
-	int	pin;
 };
 
 static DECLARE_BITMAP(hub_irq_map, IP27_HUB_IRQ_COUNT);
@@ -54,7 +52,7 @@ static void enable_hub_irq(struct irq_data *d)
 	struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
 	unsigned long *mask = per_cpu(irq_enable_mask, hd->cpu);
 
-	set_bit(hd->bit, mask);
+	set_bit(d->hwirq, mask);
 	__raw_writeq(mask[0], hd->irq_mask[0]);
 	__raw_writeq(mask[1], hd->irq_mask[1]);
 }
@@ -64,71 +62,11 @@ static void disable_hub_irq(struct irq_data *d)
 	struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
 	unsigned long *mask = per_cpu(irq_enable_mask, hd->cpu);
 
-	clear_bit(hd->bit, mask);
+	clear_bit(d->hwirq, mask);
 	__raw_writeq(mask[0], hd->irq_mask[0]);
 	__raw_writeq(mask[1], hd->irq_mask[1]);
 }
 
-static unsigned int startup_bridge_irq(struct irq_data *d)
-{
-	struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
-	struct bridge_controller *bc;
-	nasid_t nasid;
-	u32 device;
-	int pin;
-
-	if (!hd)
-		return -EINVAL;
-
-	pin = hd->pin;
-	bc = hd->bc;
-
-	nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(hd->cpu));
-	bridge_write(bc, b_int_addr[pin].addr,
-		     (0x20000 | hd->bit | (nasid << 8)));
-	bridge_set(bc, b_int_enable, (1 << pin));
-	bridge_set(bc, b_int_enable, 0x7ffffe00); /* more stuff in int_enable */
-
-	/*
-	 * Enable sending of an interrupt clear packt to the hub on a high to
-	 * low transition of the interrupt pin.
-	 *
-	 * IRIX sets additional bits in the address which are documented as
-	 * reserved in the bridge docs.
-	 */
-	bridge_set(bc, b_int_mode, (1UL << pin));
-
-	/*
-	 * We assume the bridge to have a 1:1 mapping between devices
-	 * (slots) and intr pins.
-	 */
-	device = bridge_read(bc, b_int_device);
-	device &= ~(7 << (pin*3));
-	device |= (pin << (pin*3));
-	bridge_write(bc, b_int_device, device);
-
-	bridge_read(bc, b_wid_tflush);
-
-	enable_hub_irq(d);
-
-	return 0;	/* Never anything pending.  */
-}
-
-static void shutdown_bridge_irq(struct irq_data *d)
-{
-	struct hub_irq_data *hd = irq_data_get_irq_chip_data(d);
-	struct bridge_controller *bc;
-
-	if (!hd)
-		return;
-
-	disable_hub_irq(d);
-
-	bc = hd->bc;
-	bridge_clr(bc, b_int_enable, (1 << hd->pin));
-	bridge_read(bc, b_wid_tflush);
-}
-
 static void setup_hub_mask(struct hub_irq_data *hd, const struct cpumask *mask)
 {
 	nasid_t nasid;
@@ -144,9 +82,6 @@ static void setup_hub_mask(struct hub_irq_data *hd, const struct cpumask *mask)
 		hd->irq_mask[0] = REMOTE_HUB_PTR(nasid, PI_INT_MASK0_B);
 		hd->irq_mask[1] = REMOTE_HUB_PTR(nasid, PI_INT_MASK1_B);
 	}
-
-	/* Make sure it's not already pending when we connect it. */
-	REMOTE_HUB_CLR_INTR(nasid, hd->bit);
 }
 
 static int set_affinity_hub_irq(struct irq_data *d, const struct cpumask *mask,
@@ -163,7 +98,7 @@ static int set_affinity_hub_irq(struct irq_data *d, const struct cpumask *mask,
 	setup_hub_mask(hd, mask);
 
 	if (irqd_is_started(d))
-		startup_bridge_irq(d);
+		enable_hub_irq(d);
 
 	irq_data_update_effective_affinity(d, cpumask_of(hd->cpu));
 
@@ -172,20 +107,22 @@ static int set_affinity_hub_irq(struct irq_data *d, const struct cpumask *mask,
 
 static struct irq_chip hub_irq_type = {
 	.name		  = "HUB",
-	.irq_startup	  = startup_bridge_irq,
-	.irq_shutdown	  = shutdown_bridge_irq,
 	.irq_mask	  = disable_hub_irq,
 	.irq_unmask	  = enable_hub_irq,
 	.irq_set_affinity = set_affinity_hub_irq,
 };
 
-int request_bridge_irq(struct bridge_controller *bc, int pin)
+static int hub_domain_alloc(struct irq_domain *domain, unsigned int virq,
+			    unsigned int nr_irqs, void *arg)
 {
+	struct irq_alloc_info *info = arg;
 	struct hub_irq_data *hd;
 	struct hub_data *hub;
 	struct irq_desc *desc;
 	int swlevel;
-	int irq;
+
+	if (nr_irqs > 1 || !info)
+		return -EINVAL;
 
 	hd = kzalloc(sizeof(*hd), GFP_KERNEL);
 	if (!hd)
@@ -196,46 +133,41 @@ int request_bridge_irq(struct bridge_controller *bc, int pin)
 		kfree(hd);
 		return -EAGAIN;
 	}
-	irq = swlevel + IP27_HUB_IRQ_BASE;
-
-	hd->bc = bc;
-	hd->bit = swlevel;
-	hd->pin = pin;
-	irq_set_chip_data(irq, hd);
+	irq_domain_set_info(domain, virq, swlevel, &hub_irq_type, hd,
+			    handle_level_irq, NULL, NULL);
 
 	/* use CPU connected to nearest hub */
-	hub = hub_data(NASID_TO_COMPACT_NODEID(bc->nasid));
+	hub = hub_data(NASID_TO_COMPACT_NODEID(info->nasid));
 	setup_hub_mask(hd, &hub->h_cpus);
 
-	desc = irq_to_desc(irq);
-	desc->irq_common_data.node = bc->nasid;
+	/* Make sure it's not already pending when we connect it. */
+	REMOTE_HUB_CLR_INTR(info->nasid, swlevel);
+
+	desc = irq_to_desc(virq);
+	desc->irq_common_data.node = info->nasid;
 	cpumask_copy(desc->irq_common_data.affinity, &hub->h_cpus);
 
-	return irq;
+	return 0;
 }
 
-void ip27_hub_irq_init(void)
+static void hub_domain_free(struct irq_domain *domain,
+			    unsigned int virq, unsigned int nr_irqs)
 {
-	int i;
-
-	for (i = IP27_HUB_IRQ_BASE;
-	     i < (IP27_HUB_IRQ_BASE + IP27_HUB_IRQ_COUNT); i++)
-		irq_set_chip_and_handler(i, &hub_irq_type, handle_level_irq);
-
-	/*
-	 * Some interrupts are reserved by hardware or by software convention.
-	 * Mark these as reserved right away so they won't be used accidentally
-	 * later.
-	 */
-	for (i = 0; i <= BASE_PCI_IRQ; i++)
-		set_bit(i, hub_irq_map);
+	struct irq_data *irqd;
 
-	set_bit(IP_PEND0_6_63, hub_irq_map);
+	if (nr_irqs > 1)
+		return;
 
-	for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++)
-		set_bit(i, hub_irq_map);
+	irqd = irq_domain_get_irq_data(domain, virq);
+	if (irqd && irqd->chip_data)
+		kfree(irqd->chip_data);
 }
 
+static const struct irq_domain_ops hub_domain_ops = {
+	.alloc = hub_domain_alloc,
+	.free  = hub_domain_free,
+};
+
 /*
  * This code is unnecessarily complex, because we do
  * intr enabling. Basically, once we grab the set of intrs we need
@@ -252,7 +184,9 @@ static void ip27_do_irq_mask0(struct irq_desc *desc)
 {
 	cpuid_t cpu = smp_processor_id();
 	unsigned long *mask = per_cpu(irq_enable_mask, cpu);
+	struct irq_domain *domain;
 	u64 pend0;
+	int irq;
 
 	/* copied from Irix intpend0() */
 	pend0 = LOCAL_HUB_L(PI_INT_PEND0);
@@ -276,7 +210,14 @@ static void ip27_do_irq_mask0(struct irq_desc *desc)
 		generic_smp_call_function_interrupt();
 	} else
 #endif
-		generic_handle_irq(__ffs(pend0) + IP27_HUB_IRQ_BASE);
+	{
+		domain = irq_desc_get_handler_data(desc);
+		irq = irq_linear_revmap(domain, __ffs(pend0));
+		if (irq)
+			generic_handle_irq(irq);
+		else
+			spurious_interrupt();
+	}
 
 	LOCAL_HUB_L(PI_INT_PEND0);
 }
@@ -285,7 +226,9 @@ static void ip27_do_irq_mask1(struct irq_desc *desc)
 {
 	cpuid_t cpu = smp_processor_id();
 	unsigned long *mask = per_cpu(irq_enable_mask, cpu);
+	struct irq_domain *domain;
 	u64 pend1;
+	int irq;
 
 	/* copied from Irix intpend0() */
 	pend1 = LOCAL_HUB_L(PI_INT_PEND1);
@@ -294,7 +237,12 @@ static void ip27_do_irq_mask1(struct irq_desc *desc)
 	if (!pend1)
 		return;
 
-	generic_handle_irq(__ffs(pend1) + IP27_HUB_IRQ_BASE + 64);
+	domain = irq_desc_get_handler_data(desc);
+	irq = irq_linear_revmap(domain, __ffs(pend1) + 64);
+	if (irq)
+		generic_handle_irq(irq);
+	else
+		spurious_interrupt();
 
 	LOCAL_HUB_L(PI_INT_PEND1);
 }
@@ -325,11 +273,41 @@ void install_ipi(void)
 
 void __init arch_init_irq(void)
 {
+	struct irq_domain *domain;
+	struct fwnode_handle *fn;
+	int i;
+
 	mips_cpu_irq_init();
-	ip27_hub_irq_init();
+
+	/*
+	 * Some interrupts are reserved by hardware or by software convention.
+	 * Mark these as reserved right away so they won't be used accidentally
+	 * later.
+	 */
+	for (i = 0; i <= BASE_PCI_IRQ; i++)
+		set_bit(i, hub_irq_map);
+
+	set_bit(IP_PEND0_6_63, hub_irq_map);
+
+	for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++)
+		set_bit(i, hub_irq_map);
+
+	fn = irq_domain_alloc_named_fwnode("HUB");
+	WARN_ON(fn == NULL);
+	if (!fn)
+		return;
+	domain = irq_domain_create_linear(fn, IP27_HUB_IRQ_COUNT,
+					  &hub_domain_ops, NULL);
+	WARN_ON(domain == NULL);
+	if (!domain)
+		return;
+
+	irq_set_default_host(domain);
 
 	irq_set_percpu_devid(IP27_HUB_PEND0_IRQ);
-	irq_set_chained_handler(IP27_HUB_PEND0_IRQ, ip27_do_irq_mask0);
+	irq_set_chained_handler_and_data(IP27_HUB_PEND0_IRQ, ip27_do_irq_mask0,
+					 domain);
 	irq_set_percpu_devid(IP27_HUB_PEND1_IRQ);
-	irq_set_chained_handler(IP27_HUB_PEND1_IRQ, ip27_do_irq_mask1);
+	irq_set_chained_handler_and_data(IP27_HUB_PEND1_IRQ, ip27_do_irq_mask1,
+					 domain);
 }

arch/mips/sgi-ip27/ip27-xtalk.c

@@ -9,6 +9,9 @@
 
 #include <linux/kernel.h>
 #include <linux/smp.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/xtalk-bridge.h>
+#include <asm/sn/addrs.h>
 #include <asm/sn/types.h>
 #include <asm/sn/klconfig.h>
 #include <asm/sn/hub.h>
@@ -20,7 +23,48 @@
 #define XXBOW_WIDGET_PART_NUM	0xd000	/* Xbow in Xbridge */
 #define BASE_XBOW_PORT		8     /* Lowest external port */
 
-extern int bridge_probe(nasid_t nasid, int widget, int masterwid);
+static void bridge_platform_create(nasid_t nasid, int widget, int masterwid)
+{
+	struct xtalk_bridge_platform_data *bd;
+	struct platform_device *pdev;
+	unsigned long offset;
+
+	bd = kzalloc(sizeof(*bd), GFP_KERNEL);
+	if (!bd)
+		goto no_mem;
+	pdev = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO);
+	if (!pdev) {
+		kfree(bd);
+		goto no_mem;
+	}
+
+	offset = NODE_OFFSET(nasid);
+
+	bd->bridge_addr = RAW_NODE_SWIN_BASE(nasid, widget);
+	bd->intr_addr	= BIT_ULL(47) + 0x01800000 + PI_INT_PEND_MOD;
+	bd->nasid	= nasid;
+	bd->masterwid	= masterwid;
+
+	bd->mem.name	= "Bridge PCI MEM";
+	bd->mem.start	= offset + (widget << SWIN_SIZE_BITS);
+	bd->mem.end	= bd->mem.start + SWIN_SIZE - 1;
+	bd->mem.flags	= IORESOURCE_MEM;
+	bd->mem_offset	= offset;
+
+	bd->io.name	= "Bridge PCI IO";
+	bd->io.start	= offset + (widget << SWIN_SIZE_BITS);
+	bd->io.end	= bd->io.start + SWIN_SIZE - 1;
+	bd->io.flags	= IORESOURCE_IO;
+	bd->io_offset	= offset;
+
+	platform_device_add_data(pdev, bd, sizeof(*bd));
+	platform_device_add(pdev);
+	pr_info("xtalk:n%d/%x bridge widget\n", nasid, widget);
+	return;
+
+no_mem:
+	pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);
+}
 
 static int probe_one_port(nasid_t nasid, int widget, int masterwid)
 {
@@ -31,13 +75,10 @@ static int probe_one_port(nasid_t nasid, int widget, int masterwid)
 		(RAW_NODE_SWIN_BASE(nasid, widget) + WIDGET_ID);
 	partnum = XWIDGET_PART_NUM(widget_id);
 
-	printk(KERN_INFO "Cpu %d, Nasid 0x%x, widget 0x%x (partnum 0x%x) is ",
-			smp_processor_id(), nasid, widget, partnum);
-
 	switch (partnum) {
 	case BRIDGE_WIDGET_PART_NUM:
 	case XBRIDGE_WIDGET_PART_NUM:
-		bridge_probe(nasid, widget, masterwid);
+		bridge_platform_create(nasid, widget, masterwid);
 		break;
 	default:
 		break;
@@ -52,8 +93,6 @@ static int xbow_probe(nasid_t nasid)
 	klxbow_t *xbow_p;
 	unsigned masterwid, i;
 
-	printk("is xbow\n");
-
 	/*
 	 * found xbow, so may have multiple bridges
 	 * need to probe xbow
@@ -117,19 +156,17 @@ static void xtalk_probe_node(cnodeid_t nid)
 		       (RAW_NODE_SWIN_BASE(nasid, 0x0) + WIDGET_ID);
 	partnum = XWIDGET_PART_NUM(widget_id);
 
-	printk(KERN_INFO "Cpu %d, Nasid 0x%x: partnum 0x%x is ",
-			smp_processor_id(), nasid, partnum);
-
 	switch (partnum) {
 	case BRIDGE_WIDGET_PART_NUM:
-		bridge_probe(nasid, 0x8, 0xa);
+		bridge_platform_create(nasid, 0x8, 0xa);
 		break;
 	case XBOW_WIDGET_PART_NUM:
 	case XXBOW_WIDGET_PART_NUM:
+		pr_info("xtalk:n%d/0 xbow widget\n", nasid);
 		xbow_probe(nasid);
 		break;
 	default:
-		printk(" unknown widget??\n");
+		pr_info("xtalk:n%d/0 unknown widget (0x%x)\n", nasid, partnum);
 		break;
 	}
 }

include/linux/platform_data/xtalk-bridge.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * SGI PCI Xtalk Bridge
+ */
+
+#ifndef PLATFORM_DATA_XTALK_BRIDGE_H
+#define PLATFORM_DATA_XTALK_BRIDGE_H
+
+#include <asm/sn/types.h>
+
+struct xtalk_bridge_platform_data {
+	struct resource	mem;
+	struct resource io;
+	unsigned long bridge_addr;
+	unsigned long intr_addr;
+	unsigned long mem_offset;
+	unsigned long io_offset;
+	nasid_t	nasid;
+	int	masterwid;
+};
+
+#endif /* PLATFORM_DATA_XTALK_BRIDGE_H */