qed: Add vport WFQ configuration APIs

This patch adds relevant APIs needed to configure WFQ
(Weighted fair queueing) values for the vports. WFQ configuration
is used per vport basis when minimum bandwidth update/configuration
is notified to the PF by the management firmware.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/qed.h

@@ -32,6 +32,8 @@ extern const struct qed_common_ops qed_common_ops_pass;
 #define NAME_SIZE 16
 #define VER_SIZE 16
 
+#define QED_WFQ_UNIT	100
+
 /* cau states */
 enum qed_coalescing_mode {
 	QED_COAL_MODE_DISABLE,
@@ -237,6 +239,12 @@ struct qed_dmae_info {
 	struct dmae_cmd *p_dmae_cmd;
 };
 
+struct qed_wfq_data {
+	/* when feature is configured for at least 1 vport */
+	u32	min_speed;
+	bool	configured;
+};
+
 struct qed_qm_info {
 	struct init_qm_pq_params	*qm_pq_params;
 	struct init_qm_vport_params	*qm_vport_params;
@@ -257,6 +265,7 @@ struct qed_qm_info {
 	bool				vport_wfq_en;
 	u8				pf_wfq;
 	u32				pf_rl;
+	struct qed_wfq_data		*wfq_data;
 };
 
 struct storm_stats {
@@ -526,6 +535,8 @@ static inline u8 qed_concrete_to_sw_fid(struct qed_dev *cdev,
 
 #define PURE_LB_TC 8
 
+void qed_configure_vp_wfq_on_link_change(struct qed_dev *cdev, u32 min_pf_rate);
+
 #define QED_LEADING_HWFN(dev)   (&dev->hwfns[0])
 
 /* Other Linux specific common definitions */

drivers/net/ethernet/qlogic/qed/qed_dev.c

@@ -105,6 +105,8 @@ static void qed_qm_info_free(struct qed_hwfn *p_hwfn)
 	qm_info->qm_vport_params = NULL;
 	kfree(qm_info->qm_port_params);
 	qm_info->qm_port_params = NULL;
+	kfree(qm_info->wfq_data);
+	qm_info->wfq_data = NULL;
 }
 
 void qed_resc_free(struct qed_dev *cdev)
@@ -175,6 +177,11 @@ static int qed_init_qm_info(struct qed_hwfn *p_hwfn)
 	if (!qm_info->qm_port_params)
 		goto alloc_err;
 
+	qm_info->wfq_data = kcalloc(num_vports, sizeof(*qm_info->wfq_data),
+				    GFP_KERNEL);
+	if (!qm_info->wfq_data)
+		goto alloc_err;
+
 	vport_id = (u8)RESC_START(p_hwfn, QED_VPORT);
 
 	/* First init per-TC PQs */
@@ -221,10 +228,7 @@ static int qed_init_qm_info(struct qed_hwfn *p_hwfn)
 
 alloc_err:
 	DP_NOTICE(p_hwfn, "Failed to allocate memory for QM params\n");
-	kfree(qm_info->qm_pq_params);
-	kfree(qm_info->qm_vport_params);
-	kfree(qm_info->qm_port_params);
-
+	qed_qm_info_free(p_hwfn);
 	return -ENOMEM;
 }
 
@@ -1595,3 +1599,179 @@ int qed_fw_rss_eng(struct qed_hwfn *p_hwfn,
 
 	return 0;
 }
+
+/* Calculate final WFQ values for all vports and configure them.
+ * After this configuration each vport will have
+ * approx min rate =  min_pf_rate * (vport_wfq / QED_WFQ_UNIT)
+ */
+static void qed_configure_wfq_for_all_vports(struct qed_hwfn *p_hwfn,
+					     struct qed_ptt *p_ptt,
+					     u32 min_pf_rate)
+{
+	struct init_qm_vport_params *vport_params;
+	int i;
+
+	vport_params = p_hwfn->qm_info.qm_vport_params;
+
+	for (i = 0; i < p_hwfn->qm_info.num_vports; i++) {
+		u32 wfq_speed = p_hwfn->qm_info.wfq_data[i].min_speed;
+
+		vport_params[i].vport_wfq = (wfq_speed * QED_WFQ_UNIT) /
+						min_pf_rate;
+		qed_init_vport_wfq(p_hwfn, p_ptt,
+				   vport_params[i].first_tx_pq_id,
+				   vport_params[i].vport_wfq);
+	}
+}
+
+static void qed_init_wfq_default_param(struct qed_hwfn *p_hwfn,
+				       u32 min_pf_rate)
+
+{
+	int i;
+
+	for (i = 0; i < p_hwfn->qm_info.num_vports; i++)
+		p_hwfn->qm_info.qm_vport_params[i].vport_wfq = 1;
+}
+
+static void qed_disable_wfq_for_all_vports(struct qed_hwfn *p_hwfn,
+					   struct qed_ptt *p_ptt,
+					   u32 min_pf_rate)
+{
+	struct init_qm_vport_params *vport_params;
+	int i;
+
+	vport_params = p_hwfn->qm_info.qm_vport_params;
+
+	for (i = 0; i < p_hwfn->qm_info.num_vports; i++) {
+		qed_init_wfq_default_param(p_hwfn, min_pf_rate);
+		qed_init_vport_wfq(p_hwfn, p_ptt,
+				   vport_params[i].first_tx_pq_id,
+				   vport_params[i].vport_wfq);
+	}
+}
+
+/* This function performs several validations for WFQ
+ * configuration and required min rate for a given vport
+ * 1. req_rate must be greater than one percent of min_pf_rate.
+ * 2. req_rate should not cause other vports [not configured for WFQ explicitly]
+ *    rates to get less than one percent of min_pf_rate.
+ * 3. total_req_min_rate [all vports min rate sum] shouldn't exceed min_pf_rate.
+ */
+static int qed_init_wfq_param(struct qed_hwfn *p_hwfn,
+			      u16 vport_id, u32 req_rate,
+			      u32 min_pf_rate)
+{
+	u32 total_req_min_rate = 0, total_left_rate = 0, left_rate_per_vp = 0;
+	int non_requested_count = 0, req_count = 0, i, num_vports;
+
+	num_vports = p_hwfn->qm_info.num_vports;
+
+	/* Accounting for the vports which are configured for WFQ explicitly */
+	for (i = 0; i < num_vports; i++) {
+		u32 tmp_speed;
+
+		if ((i != vport_id) &&
+		    p_hwfn->qm_info.wfq_data[i].configured) {
+			req_count++;
+			tmp_speed = p_hwfn->qm_info.wfq_data[i].min_speed;
+			total_req_min_rate += tmp_speed;
+		}
+	}
+
+	/* Include current vport data as well */
+	req_count++;
+	total_req_min_rate += req_rate;
+	non_requested_count = num_vports - req_count;
+
+	if (req_rate < min_pf_rate / QED_WFQ_UNIT) {
+		DP_VERBOSE(p_hwfn, NETIF_MSG_LINK,
+			   "Vport [%d] - Requested rate[%d Mbps] is less than one percent of configured PF min rate[%d Mbps]\n",
+			   vport_id, req_rate, min_pf_rate);
+		return -EINVAL;
+	}
+
+	if (num_vports > QED_WFQ_UNIT) {
+		DP_VERBOSE(p_hwfn, NETIF_MSG_LINK,
+			   "Number of vports is greater than %d\n",
+			   QED_WFQ_UNIT);
+		return -EINVAL;
+	}
+
+	if (total_req_min_rate > min_pf_rate) {
+		DP_VERBOSE(p_hwfn, NETIF_MSG_LINK,
+			   "Total requested min rate for all vports[%d Mbps] is greater than configured PF min rate[%d Mbps]\n",
+			   total_req_min_rate, min_pf_rate);
+		return -EINVAL;
+	}
+
+	total_left_rate	= min_pf_rate - total_req_min_rate;
+
+	left_rate_per_vp = total_left_rate / non_requested_count;
+	if (left_rate_per_vp <  min_pf_rate / QED_WFQ_UNIT) {
+		DP_VERBOSE(p_hwfn, NETIF_MSG_LINK,
+			   "Non WFQ configured vports rate [%d Mbps] is less than one percent of configured PF min rate[%d Mbps]\n",
+			   left_rate_per_vp, min_pf_rate);
+		return -EINVAL;
+	}
+
+	p_hwfn->qm_info.wfq_data[vport_id].min_speed = req_rate;
+	p_hwfn->qm_info.wfq_data[vport_id].configured = true;
+
+	for (i = 0; i < num_vports; i++) {
+		if (p_hwfn->qm_info.wfq_data[i].configured)
+			continue;
+
+		p_hwfn->qm_info.wfq_data[i].min_speed = left_rate_per_vp;
+	}
+
+	return 0;
+}
+
+static int __qed_configure_vp_wfq_on_link_change(struct qed_hwfn *p_hwfn,
+						 struct qed_ptt *p_ptt,
+						 u32 min_pf_rate)
+{
+	bool use_wfq = false;
+	int rc = 0;
+	u16 i;
+
+	/* Validate all pre configured vports for wfq */
+	for (i = 0; i < p_hwfn->qm_info.num_vports; i++) {
+		u32 rate;
+
+		if (!p_hwfn->qm_info.wfq_data[i].configured)
+			continue;
+
+		rate = p_hwfn->qm_info.wfq_data[i].min_speed;
+		use_wfq = true;
+
+		rc = qed_init_wfq_param(p_hwfn, i, rate, min_pf_rate);
+		if (rc) {
+			DP_NOTICE(p_hwfn,
+				  "WFQ validation failed while configuring min rate\n");
+			break;
+		}
+	}
+
+	if (!rc && use_wfq)
+		qed_configure_wfq_for_all_vports(p_hwfn, p_ptt, min_pf_rate);
+	else
+		qed_disable_wfq_for_all_vports(p_hwfn, p_ptt, min_pf_rate);
+
+	return rc;
+}
+
+/* API to configure WFQ from mcp link change */
+void qed_configure_vp_wfq_on_link_change(struct qed_dev *cdev, u32 min_pf_rate)
+{
+	int i;
+
+	for_each_hwfn(cdev, i) {
+		struct qed_hwfn *p_hwfn = &cdev->hwfns[i];
+
+		__qed_configure_vp_wfq_on_link_change(p_hwfn,
+						      p_hwfn->p_dpc_ptt,
+						      min_pf_rate);
+	}
+}

drivers/net/ethernet/qlogic/qed/qed_hsi.h

@@ -5116,4 +5116,6 @@ struct hw_set_image {
 	struct hw_set_info	hw_sets[1];
 };
 
+int qed_init_vport_wfq(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
+		       u16 first_tx_pq_id[NUM_OF_TCS], u16 vport_wfq);
 #endif

drivers/net/ethernet/qlogic/qed/qed_init_fw_funcs.c

@@ -732,6 +732,31 @@ int qed_init_pf_rl(struct qed_hwfn *p_hwfn,
 	return 0;
 }
 
+int qed_init_vport_wfq(struct qed_hwfn *p_hwfn,
+		       struct qed_ptt *p_ptt,
+		       u16 first_tx_pq_id[NUM_OF_TCS],
+		       u16 vport_wfq)
+{
+	u32 inc_val = QM_WFQ_INC_VAL(vport_wfq);
+	u8 tc;
+
+	if (!inc_val || inc_val > QM_WFQ_MAX_INC_VAL) {
+		DP_NOTICE(p_hwfn, "Invalid VPORT WFQ weight configuration");
+		return -1;
+	}
+
+	for (tc = 0; tc < NUM_OF_TCS; tc++) {
+		u16 vport_pq_id = first_tx_pq_id[tc];
+
+		if (vport_pq_id != QM_INVALID_PQ_ID)
+			qed_wr(p_hwfn, p_ptt,
+			       QM_REG_WFQVPWEIGHT + vport_pq_id * 4,
+			       inc_val);
+	}
+
+	return 0;
+}
+
 int qed_init_vport_rl(struct qed_hwfn *p_hwfn,
 		      struct qed_ptt *p_ptt,
 		      u8 vport_id,

drivers/net/ethernet/qlogic/qed/qed_reg_addr.h

@@ -458,4 +458,5 @@
 #define PBF_REG_NGE_COMP_VER			0xd80524UL
 #define PRS_REG_NGE_COMP_VER			0x1f0878UL
 
+#define QM_REG_WFQVPWEIGHT	0x2fa000UL
 #endif