dmaengine: pl08x: Split device_control

Split the device_control callback of the AMBA PL08x DMA driver to make use
of the newly introduced callbacks, that will eventually be used to retrieve
slave capabilities.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>

drivers/dma/amba-pl08x.c

@@ -1386,32 +1386,6 @@ static u32 pl08x_get_cctl(struct pl08x_dma_chan *plchan,
 	return pl08x_cctl(cctl);
 }
 
-static int dma_set_runtime_config(struct dma_chan *chan,
-				  struct dma_slave_config *config)
-{
-	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
-	struct pl08x_driver_data *pl08x = plchan->host;
-
-	if (!plchan->slave)
-		return -EINVAL;
-
-	/* Reject definitely invalid configurations */
-	if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
-	    config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
-		return -EINVAL;
-
-	if (config->device_fc && pl08x->vd->pl080s) {
-		dev_err(&pl08x->adev->dev,
-			"%s: PL080S does not support peripheral flow control\n",
-			__func__);
-		return -EINVAL;
-	}
-
-	plchan->cfg = *config;
-
-	return 0;
-}
-
 /*
  * Slave transactions callback to the slave device to allow
  * synchronization of slave DMA signals with the DMAC enable
@@ -1693,32 +1667,44 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_cyclic(
 	return vchan_tx_prep(&plchan->vc, &txd->vd, flags);
 }
 
-static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
-			 unsigned long arg)
+static int pl08x_config(struct dma_chan *chan,
+			struct dma_slave_config *config)
 {
 	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
 	struct pl08x_driver_data *pl08x = plchan->host;
-	unsigned long flags;
-	int ret = 0;
 
-	/* Controls applicable to inactive channels */
-	if (cmd == DMA_SLAVE_CONFIG) {
-		return dma_set_runtime_config(chan,
-					      (struct dma_slave_config *)arg);
+	if (!plchan->slave)
+		return -EINVAL;
+
+	/* Reject definitely invalid configurations */
+	if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
+	    config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
+		return -EINVAL;
+
+	if (config->device_fc && pl08x->vd->pl080s) {
+		dev_err(&pl08x->adev->dev,
+			"%s: PL080S does not support peripheral flow control\n",
+			__func__);
+		return -EINVAL;
 	}
 
-	/*
-	 * Anything succeeds on channels with no physical allocation and
-	 * no queued transfers.
-	 */
+	plchan->cfg = *config;
+
+	return 0;
+}
+
+static int pl08x_terminate_all(struct dma_chan *chan)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	struct pl08x_driver_data *pl08x = plchan->host;
+	unsigned long flags;
+
 	spin_lock_irqsave(&plchan->vc.lock, flags);
 	if (!plchan->phychan && !plchan->at) {
 		spin_unlock_irqrestore(&plchan->vc.lock, flags);
 		return 0;
 	}
 
-	switch (cmd) {
-	case DMA_TERMINATE_ALL:
 	plchan->state = PL08X_CHAN_IDLE;
 
 	if (plchan->phychan) {
@@ -1735,24 +1721,56 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 	}
 	/* Dequeue jobs not yet fired as well */
 	pl08x_free_txd_list(pl08x, plchan);
-		break;
-	case DMA_PAUSE:
+
+	spin_unlock_irqrestore(&plchan->vc.lock, flags);
+
+	return 0;
+}
+
+static int pl08x_pause(struct dma_chan *chan)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	unsigned long flags;
+
+	/*
+	 * Anything succeeds on channels with no physical allocation and
+	 * no queued transfers.
+	 */
+	spin_lock_irqsave(&plchan->vc.lock, flags);
+	if (!plchan->phychan && !plchan->at) {
+		spin_unlock_irqrestore(&plchan->vc.lock, flags);
+		return 0;
+	}
+
 	pl08x_pause_phy_chan(plchan->phychan);
 	plchan->state = PL08X_CHAN_PAUSED;
-		break;
-	case DMA_RESUME:
+
+	spin_unlock_irqrestore(&plchan->vc.lock, flags);
+
+	return 0;
+}
+
+static int pl08x_resume(struct dma_chan *chan)
+{
+	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
+	unsigned long flags;
+
+	/*
+	 * Anything succeeds on channels with no physical allocation and
+	 * no queued transfers.
+	 */
+	spin_lock_irqsave(&plchan->vc.lock, flags);
+	if (!plchan->phychan && !plchan->at) {
+		spin_unlock_irqrestore(&plchan->vc.lock, flags);
+		return 0;
+	}
+
 	pl08x_resume_phy_chan(plchan->phychan);
 	plchan->state = PL08X_CHAN_RUNNING;
-		break;
-	default:
-		/* Unknown command */
-		ret = -ENXIO;
-		break;
-	}
 
 	spin_unlock_irqrestore(&plchan->vc.lock, flags);
 
-	return ret;
+	return 0;
 }
 
 bool pl08x_filter_id(struct dma_chan *chan, void *chan_id)
@@ -2048,7 +2066,10 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 	pl08x->memcpy.device_prep_dma_interrupt = pl08x_prep_dma_interrupt;
 	pl08x->memcpy.device_tx_status = pl08x_dma_tx_status;
 	pl08x->memcpy.device_issue_pending = pl08x_issue_pending;
-	pl08x->memcpy.device_control = pl08x_control;
+	pl08x->memcpy.device_config = pl08x_config;
+	pl08x->memcpy.device_pause = pl08x_pause;
+	pl08x->memcpy.device_resume = pl08x_resume;
+	pl08x->memcpy.device_terminate_all = pl08x_terminate_all;
 
 	/* Initialize slave engine */
 	dma_cap_set(DMA_SLAVE, pl08x->slave.cap_mask);
@@ -2061,7 +2082,10 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 	pl08x->slave.device_issue_pending = pl08x_issue_pending;
 	pl08x->slave.device_prep_slave_sg = pl08x_prep_slave_sg;
 	pl08x->slave.device_prep_dma_cyclic = pl08x_prep_dma_cyclic;
-	pl08x->slave.device_control = pl08x_control;
+	pl08x->slave.device_config = pl08x_config;
+	pl08x->slave.device_pause = pl08x_pause;
+	pl08x->slave.device_resume = pl08x_resume;
+	pl08x->slave.device_terminate_all = pl08x_terminate_all;
 
 	/* Get the platform data */
 	pl08x->pd = dev_get_platdata(&adev->dev);