Skip to content

L
linux
Commit bd69e273 authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge branch 'for-3.5/usb-ulpi' of... 

Merge branch 'for-3.5/usb-ulpi' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/drivers

By Stephen Warren (30) and others
via Stephen Warren
* 'for-3.5/usb-ulpi' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (7 commits)
  ARM: dt: tegra: pinmux changes for USB ULPI
  ARM: tegra: add USB ULPI PHY reset GPIO to device tree
  ARM: tegra: don't hard-code USB ULPI PHY reset_gpio
  ARM: tegra: change pll_p_out4's rate to 24MHz
  ARM: tegra: fix pclk rate
  ARM: tegra: reparent sclk to pll_c_out1
  ARM: tegra: Add pllc clock init table
  + depends/pinctrl/mergebase branch

Pinctrl mergebase has a conflict in drivers/pinctrl/core.c that was resolved.
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents f7269a82 563da21b
Expand all Show whitespace changes
Inline Side-by-side
Showing with 3441 additions and 3515 deletions
Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt 0 → 100644
View file @ bd69e273
NVIDIA Tegra20 pinmux controller
Required properties:
- compatible: "nvidia,tegra20-pinmux"
- reg: Should contain the register physical address and length for each of
the tri-state, mux, pull-up/down, and pad control register sets.
Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
Tegra's pin configuration nodes act as a container for an abitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration
parameters, such as pull-up, tristate, drive strength, etc.
The name of each subnode is not important; all subnodes should be enumerated
and processed purely based on their content.
Each subnode only affects those parameters that are explicitly listed. In
other words, a subnode that lists a mux function but no pin configuration
parameters implies no information about any pin configuration parameters.
Similarly, a pin subnode that describes a pullup parameter implies no
information about e.g. the mux function or tristate parameter. For this
reason, even seemingly boolean values are actually tristates in this binding:
unspecified, off, or on. Unspecified is represented as an absent property,
and off/on are represented as integer values 0 and 1.
Required subnode-properties:
- nvidia,pins : An array of strings. Each string contains the name of a pin or
group. Valid values for these names are listed below.
Optional subnode-properties:
- nvidia,function: A string containing the name of the function to mux to the
pin or group. Valid values for function names are listed below. See the Tegra
TRM to determine which are valid for each pin or group.
- nvidia,pull: Integer, representing the pull-down/up to apply to the pin.
0: none, 1: down, 2: up.
- nvidia,tristate: Integer.
0: drive, 1: tristate.
- nvidia,high-speed-mode: Integer. Enable high speed mode the pins.
0: no, 1: yes.
- nvidia,schmitt: Integer. Enables Schmitt Trigger on the input.
0: no, 1: yes.
- nvidia,low-power-mode: Integer. Valid values 0-3. 0 is least power, 3 is
most power. Controls the drive power or current. See "Low Power Mode"
or "LPMD1" and "LPMD0" in the Tegra TRM.
- nvidia,pull-down-strength: Integer. Controls drive strength. 0 is weakest.
The range of valid values depends on the pingroup. See "CAL_DRVDN" in the
Tegra TRM.
- nvidia,pull-up-strength: Integer. Controls drive strength. 0 is weakest.
The range of valid values depends on the pingroup. See "CAL_DRVUP" in the
Tegra TRM.
- nvidia,slew-rate-rising: Integer. Controls rising signal slew rate. 0 is
fastest. The range of valid values depends on the pingroup. See
"DRVDN_SLWR" in the Tegra TRM.
- nvidia,slew-rate-falling: Integer. Controls falling signal slew rate. 0 is
fastest. The range of valid values depends on the pingroup. See
"DRVUP_SLWF" in the Tegra TRM.
Note that many of these properties are only valid for certain specific pins
or groups. See the Tegra TRM and various pinmux spreadsheets for complete
details regarding which groups support which functionality. The Linux pinctrl
driver may also be a useful reference, since it consolidates, disambiguates,
and corrects data from all those sources.
Valid values for pin and group names are:
mux groups:
These all support nvidia,function, nvidia,tristate, and many support
nvidia,pull.
ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1, dap2, dap3, dap4,
ddc, dta, dtb, dtc, dtd, dte, dtf, gma, gmb, gmc, gmd, gme, gpu, gpu7,
gpv, hdint, i2cp, irrx, irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn,
ld0, ld1, ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12, ld13,
ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2, lhs, lm0, lm1, lpp,
lpw0, lpw1, lpw2, lsc0, lsc1, lsck, lsda, lsdi, lspi, lvp0, lvp1, lvs,
owc, pmc, pta, rm, sdb, sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi,
spdo, spia, spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac, uad,
uca, ucb, uda.
tristate groups:
These only support nvidia,pull.
ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls, lc, ld17_0,
ld19_18, ld21_20, ld23_22.
drive groups:
With some exceptions, these support nvidia,high-speed-mode,
nvidia,schmitt, nvidia,low-power-mode, nvidia,pull-down-strength,
nvidia,pull-up-strength, nvidia,slew_rate-rising, nvidia,slew_rate-falling.
drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1, drive_cdev2,
drive_csus, drive_dap1, drive_dap2, drive_dap3, drive_dap4, drive_dbg,
drive_lcd1, drive_lcd2, drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa,
drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2, drive_xm2a,
drive_xm2c, drive_xm2d, drive_xm2clk, drive_sdio1, drive_crt, drive_ddc,
drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr,
drive_uda.
Example:
pinctrl@70000000 {
compatible = "nvidia,tegra20-pinmux";
reg = < 0x70000014 0x10 /* Tri-state registers */
0x70000080 0x20 /* Mux registers */
0x700000a0 0x14 /* Pull-up/down registers */
0x70000868 0xa8 >; /* Pad control registers */
};
Example board file extract:
pinctrl@70000000 {
sdio4_default: sdio4_default {
atb {
nvidia,pins = "atb", "gma", "gme";
nvidia,function = "sdio4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
};
};
sdhci@c8000600 {
pinctrl-names = "default";
pinctrl-0 = <&sdio4_default>;
};
Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt 0 → 100644
View file @ bd69e273
NVIDIA Tegra30 pinmux controller
The Tegra30 pinctrl binding is very similar to the Tegra20 pinctrl binding,
as described in nvidia,tegra20-pinmux.txt. In fact, this document assumes
that binding as a baseline, and only documents the differences between the
two bindings.
Required properties:
- compatible: "nvidia,tegra30-pinmux"
- reg: Should contain the register physical address and length for each of
the pad control and mux registers.
Tegra30 adds the following optional properties for pin configuration subnodes:
- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes.
- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes.
- nvidia,lock: Integer. Lock the pin configuration against further changes
until reset. 0: no, 1: yes.
- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes.
As with Tegra20, see the Tegra TRM for complete details regarding which groups
support which functionality.
Valid values for pin and group names are:
per-pin mux groups:
These all support nvidia,function, nvidia,tristate, nvidia,pull,
nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain,
nvidia,io-reset.
clk_32k_out_pa0, uart3_cts_n_pa1, dap2_fs_pa2, dap2_sclk_pa3,
dap2_din_pa4, dap2_dout_pa5, sdmmc3_clk_pa6, sdmmc3_cmd_pa7, gmi_a17_pb0,
gmi_a18_pb1, lcd_pwr0_pb2, lcd_pclk_pb3, sdmmc3_dat3_pb4, sdmmc3_dat2_pb5,
sdmmc3_dat1_pb6, sdmmc3_dat0_pb7, uart3_rts_n_pc0, lcd_pwr1_pc1,
uart2_txd_pc2, uart2_rxd_pc3, gen1_i2c_scl_pc4, gen1_i2c_sda_pc5,
lcd_pwr2_pc6, gmi_wp_n_pc7, sdmmc3_dat5_pd0, sdmmc3_dat4_pd1, lcd_dc1_pd2,
sdmmc3_dat6_pd3, sdmmc3_dat7_pd4, vi_d1_pd5, vi_vsync_pd6, vi_hsync_pd7,
lcd_d0_pe0, lcd_d1_pe1, lcd_d2_pe2, lcd_d3_pe3, lcd_d4_pe4, lcd_d5_pe5,
lcd_d6_pe6, lcd_d7_pe7, lcd_d8_pf0, lcd_d9_pf1, lcd_d10_pf2, lcd_d11_pf3,
lcd_d12_pf4, lcd_d13_pf5, lcd_d14_pf6, lcd_d15_pf7, gmi_ad0_pg0,
gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5,
gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2,
gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7,
gmi_wr_n_pi0, gmi_oe_n_pi1, gmi_dqs_pi2, gmi_cs6_n_pi3, gmi_rst_n_pi4,
gmi_iordy_pi5, gmi_cs7_n_pi6, gmi_wait_pi7, gmi_cs0_n_pj0, lcd_de_pj1,
gmi_cs1_n_pj2, lcd_hsync_pj3, lcd_vsync_pj4, uart2_cts_n_pj5,
uart2_rts_n_pj6, gmi_a16_pj7, gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs4_n_pk2,
gmi_cs2_n_pk3, gmi_cs3_n_pk4, spdif_out_pk5, spdif_in_pk6, gmi_a19_pk7,
vi_d2_pl0, vi_d3_pl1, vi_d4_pl2, vi_d5_pl3, vi_d6_pl4, vi_d7_pl5,
vi_d8_pl6, vi_d9_pl7, lcd_d16_pm0, lcd_d17_pm1, lcd_d18_pm2, lcd_d19_pm3,
lcd_d20_pm4, lcd_d21_pm5, lcd_d22_pm6, lcd_d23_pm7, dap1_fs_pn0,
dap1_din_pn1, dap1_dout_pn2, dap1_sclk_pn3, lcd_cs0_n_pn4, lcd_sdout_pn5,
lcd_dc0_pn6, hdmi_int_pn7, ulpi_data7_po0, ulpi_data0_po1, ulpi_data1_po2,
ulpi_data2_po3, ulpi_data3_po4, ulpi_data4_po5, ulpi_data5_po6,
ulpi_data6_po7, dap3_fs_pp0, dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3,
dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, kb_col0_pq0,
kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5,
kb_col6_pq6, kb_col7_pq7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2,
kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7,
kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4,
kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, vi_pclk_pt0, vi_mclk_pt1,
vi_d10_pt2, vi_d11_pt3, vi_d0_pt4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6,
sdmmc4_cmd_pt7, pu0, pu1, pu2, pu3, pu4, pu5, pu6, jtag_rtck_pu7, pv0,
pv1, pv2, pv3, ddc_scl_pv4, ddc_sda_pv5, crt_hsync_pv6, crt_vsync_pv7,
lcd_cs1_n_pw0, lcd_m1_pw1, spi2_cs1_n_pw2, spi2_cs2_n_pw3, clk1_out_pw4,
clk2_out_pw5, uart3_txd_pw6, uart3_rxd_pw7, spi2_mosi_px0, spi2_miso_px1,
spi2_sck_px2, spi2_cs0_n_px3, spi1_mosi_px4, spi1_sck_px5, spi1_cs0_n_px6,
spi1_miso_px7, ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3,
sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, sdmmc1_dat0_py7,
sdmmc1_clk_pz0, sdmmc1_cmd_pz1, lcd_sdin_pz2, lcd_wr_n_pz3, lcd_sck_pz4,
sys_clk_req_pz5, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, sdmmc4_dat0_paa0,
sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4,
sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, pbb0,
cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7,
cam_mclk_pcc0, pcc1, pcc2, sdmmc4_rst_n_pcc3, sdmmc4_clk_pcc4,
clk2_req_pcc5, pex_l2_rst_n_pcc6, pex_l2_clkreq_n_pcc7,
pex_l0_prsnt_n_pdd0, pex_l0_rst_n_pdd1, pex_l0_clkreq_n_pdd2,
pex_wake_n_pdd3, pex_l1_prsnt_n_pdd4, pex_l1_rst_n_pdd5,
pex_l1_clkreq_n_pdd6, pex_l2_prsnt_n_pdd7, clk3_out_pee0, clk3_req_pee1,
clk1_req_pee2, hdmi_cec_pee3, clk_32k_in, core_pwr_req, cpu_pwr_req, owr,
pwr_int_n.
drive groups:
These all support nvidia,pull-down-strength, nvidia,pull-up-strength,
nvidia,slew_rate-rising, nvidia,slew_rate-falling. Most but not all
support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode.
ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, cec, crt, csus, dap1,
dap2, dap3, dap4, dbg, ddc, dev3, gma, gmb, gmc, gmd, gme, gmf, gmg,
gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2,
uart3, uda, vi1.
Example:
pinctrl@70000000 {
compatible = "nvidia,tegra30-pinmux";
reg = < 0x70000868 0xd0 /* Pad control registers */
0x70003000 0x3e0 >; /* Mux registers */
};
Example board file extract:
pinctrl@70000000 {
sdmmc4_default: pinmux {
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
sdmmc4_dat0_paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
"sdmmc4_dat1_paa1",
"sdmmc4_dat2_paa2",
"sdmmc4_dat3_paa3",
"sdmmc4_dat4_paa4",
"sdmmc4_dat5_paa5",
"sdmmc4_dat6_paa6",
"sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
};
};
sdhci@78000400 {
pinctrl-names = "default";
pinctrl-0 = <&sdmmc4_default>;
};
Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt 0 → 100644
View file @ bd69e273
== Introduction ==
Hardware modules that control pin multiplexing or configuration parameters
such as pull-up/down, tri-state, drive-strength etc are designated as pin
controllers. Each pin controller must be represented as a node in device tree,
just like any other hardware module.
Hardware modules whose signals are affected by pin configuration are
designated client devices. Again, each client device must be represented as a
node in device tree, just like any other hardware module.
For a client device to operate correctly, certain pin controllers must
set up certain specific pin configurations. Some client devices need a
single static pin configuration, e.g. set up during initialization. Others
need to reconfigure pins at run-time, for example to tri-state pins when the
device is inactive. Hence, each client device can define a set of named
states. The number and names of those states is defined by the client device's
own binding.
The common pinctrl bindings defined in this file provide an infrastructure
for client device device tree nodes to map those state names to the pin
configuration used by those states.
Note that pin controllers themselves may also be client devices of themselves.
For example, a pin controller may set up its own "active" state when the
driver loads. This would allow representing a board's static pin configuration
in a single place, rather than splitting it across multiple client device
nodes. The decision to do this or not somewhat rests with the author of
individual board device tree files, and any requirements imposed by the
bindings for the individual client devices in use by that board, i.e. whether
they require certain specific named states for dynamic pin configuration.
== Pinctrl client devices ==
For each client device individually, every pin state is assigned an integer
ID. These numbers start at 0, and are contiguous. For each state ID, a unique
property exists to define the pin configuration. Each state may also be
assigned a name. When names are used, another property exists to map from
those names to the integer IDs.
Each client device's own binding determines the set of states the must be
defined in its device tree node, and whether to define the set of state
IDs that must be provided, or whether to define the set of state names that
must be provided.
Required properties:
pinctrl-0: List of phandles, each pointing at a pin configuration
node. These referenced pin configuration nodes must be child
nodes of the pin controller that they configure. Multiple
entries may exist in this list so that multiple pin
controllers may be configured, or so that a state may be built
from multiple nodes for a single pin controller, each
contributing part of the overall configuration. See the next
section of this document for details of the format of these
pin configuration nodes.
In some cases, it may be useful to define a state, but for it
to be empty. This may be required when a common IP block is
used in an SoC either without a pin controller, or where the
pin controller does not affect the HW module in question. If
the binding for that IP block requires certain pin states to
exist, they must still be defined, but may be left empty.
Optional properties:
pinctrl-1: List of phandles, each pointing at a pin configuration
node within a pin controller.
...
pinctrl-n: List of phandles, each pointing at a pin configuration
node within a pin controller.
pinctrl-names: The list of names to assign states. List entry 0 defines the
name for integer state ID 0, list entry 1 for state ID 1, and
so on.
For example:
/* For a client device requiring named states */
device {
pinctrl-names = "active", "idle";
pinctrl-0 = <&state_0_node_a>;
pinctrl-1 = <&state_1_node_a &state_1_node_b>;
};
/* For the same device if using state IDs */
device {
pinctrl-0 = <&state_0_node_a>;
pinctrl-1 = <&state_1_node_a &state_1_node_b>;
};
/*
* For an IP block whose binding supports pin configuration,
* but in use on an SoC that doesn't have any pin control hardware
*/
device {
pinctrl-names = "active", "idle";
pinctrl-0 = <>;
pinctrl-1 = <>;
};
== Pin controller devices ==
Pin controller devices should contain the pin configuration nodes that client
devices reference.
For example:
pincontroller {
... /* Standard DT properties for the device itself elided */
state_0_node_a {
...
};
state_1_node_a {
...
};
state_1_node_b {
...
};
}
The contents of each of those pin configuration child nodes is defined
entirely by the binding for the individual pin controller device. There
exists no common standard for this content.
The pin configuration nodes need not be direct children of the pin controller
device; they may be grandchildren, for example. Whether this is legal, and
whether there is any interaction between the child and intermediate parent
nodes, is again defined entirely by the binding for the individual pin
controller device.
Documentation/devicetree/bindings/pinmux/pinmux_nvidia.txt deleted 100644 → 0
View file @ f7269a82
NVIDIA Tegra 2 pinmux controller
Required properties:
- compatible : "nvidia,tegra20-pinmux"
Documentation/devicetree/bindings/usb/tegra-usb.txt
View file @ bd69e273
......@@ -12,6 +12,9 @@ Required properties :
- nvidia,vbus-gpio : If present, specifies a gpio that needs to be
activated for the bus to be powered.
Required properties for phy_type == ulpi:
- nvidia,phy-reset-gpio : The GPIO used to reset the PHY.
Optional properties:
- dr_mode : dual role mode. Indicates the working mode for
nvidia,tegra20-ehci compatible controllers. Can be "host", "peripheral",
......
Documentation/driver-model/devres.txt
View file @ bd69e273
......@@ -276,3 +276,7 @@ REGULATOR
devm_regulator_get()
devm_regulator_put()
devm_regulator_bulk_get()
PINCTRL
devm_pinctrl_get()
devm_pinctrl_put()
Documentation/pinctrl.txt
View file @ bd69e273
......@@ -152,11 +152,9 @@ static const struct foo_group foo_groups[] = {
};
static int foo_list_groups(struct pinctrl_dev *pctldev, unsigned selector)
static int foo_get_groups_count(struct pinctrl_dev *pctldev)
{
if (selector >= ARRAY_SIZE(foo_groups))
return -EINVAL;
return 0;
return ARRAY_SIZE(foo_groups);
}
static const char *foo_get_group_name(struct pinctrl_dev *pctldev,
......@@ -175,7 +173,7 @@ static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
}
static struct pinctrl_ops foo_pctrl_ops = {
.list_groups = foo_list_groups,
.get_groups_count = foo_get_groups_count,
.get_group_name = foo_get_group_name,
.get_group_pins = foo_get_group_pins,
};
......@@ -186,13 +184,12 @@ static struct pinctrl_desc foo_desc = {
.pctlops = &foo_pctrl_ops,
};
The pin control subsystem will call the .list_groups() function repeatedly
beginning on 0 until it returns non-zero to determine legal selectors, then
it will call the other functions to retrieve the name and pins of the group.
Maintaining the data structure of the groups is up to the driver, this is
just a simple example - in practice you may need more entries in your group
structure, for example specific register ranges associated with each group
and so on.
The pin control subsystem will call the .get_groups_count() function to
determine total number of legal selectors, then it will call the other functions
to retrieve the name and pins of the group. Maintaining the data structure of
the groups is up to the driver, this is just a simple example - in practice you
may need more entries in your group structure, for example specific register
ranges associated with each group and so on.
Pin configuration
......@@ -606,11 +603,9 @@ static const struct foo_group foo_groups[] = {
};
static int foo_list_groups(struct pinctrl_dev *pctldev, unsigned selector)
static int foo_get_groups_count(struct pinctrl_dev *pctldev)
{
if (selector >= ARRAY_SIZE(foo_groups))
return -EINVAL;
return 0;
return ARRAY_SIZE(foo_groups);
}
static const char *foo_get_group_name(struct pinctrl_dev *pctldev,
......@@ -629,7 +624,7 @@ static int foo_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
}
static struct pinctrl_ops foo_pctrl_ops = {
.list_groups = foo_list_groups,
.get_groups_count = foo_get_groups_count,
.get_group_name = foo_get_group_name,
.get_group_pins = foo_get_group_pins,
};
......@@ -640,7 +635,7 @@ struct foo_pmx_func {
const unsigned num_groups;
};
static const char * const spi0_groups[] = { "spi0_1_grp" };
static const char * const spi0_groups[] = { "spi0_0_grp", "spi0_1_grp" };
static const char * const i2c0_groups[] = { "i2c0_grp" };
static const char * const mmc0_groups[] = { "mmc0_1_grp", "mmc0_2_grp",
"mmc0_3_grp" };
......@@ -663,11 +658,9 @@ static const struct foo_pmx_func foo_functions[] = {
},
};
int foo_list_funcs(struct pinctrl_dev *pctldev, unsigned selector)
int foo_get_functions_count(struct pinctrl_dev *pctldev)
{
if (selector >= ARRAY_SIZE(foo_functions))
return -EINVAL;
return 0;
return ARRAY_SIZE(foo_functions);
}
const char *foo_get_fname(struct pinctrl_dev *pctldev, unsigned selector)
......@@ -703,7 +696,7 @@ void foo_disable(struct pinctrl_dev *pctldev, unsigned selector,
}
struct pinmux_ops foo_pmxops = {
.list_functions = foo_list_funcs,
.get_functions_count = foo_get_functions_count,
.get_function_name = foo_get_fname,
.get_function_groups = foo_get_groups,
.enable = foo_enable,
......@@ -786,7 +779,7 @@ and spi on the second function mapping:
#include <linux/pinctrl/machine.h>
static const struct pinctrl_map __initdata mapping[] = {
static const struct pinctrl_map mapping[] __initconst = {
{
.dev_name = "foo-spi.0",
.name = PINCTRL_STATE_DEFAULT,
......@@ -952,13 +945,13 @@ case), we define a mapping like this:
The result of grabbing this mapping from the device with something like
this (see next paragraph):
p = pinctrl_get(dev);
p = devm_pinctrl_get(dev);
s = pinctrl_lookup_state(p, "8bit");
ret = pinctrl_select_state(p, s);
or more simply:
p = pinctrl_get_select(dev, "8bit");
p = devm_pinctrl_get_select(dev, "8bit");
Will be that you activate all the three bottom records in the mapping at
once. Since they share the same name, pin controller device, function and
......@@ -992,7 +985,7 @@ foo_probe()
/* Allocate a state holder named "foo" etc */
struct foo_state *foo = ...;
foo->p = pinctrl_get(&device);
foo->p = devm_pinctrl_get(&device);
if (IS_ERR(foo->p)) {
/* FIXME: clean up "foo" here */
return PTR_ERR(foo->p);
......@@ -1000,24 +993,17 @@ foo_probe()
foo->s = pinctrl_lookup_state(foo->p, PINCTRL_STATE_DEFAULT);
if (IS_ERR(foo->s)) {
pinctrl_put(foo->p);
/* FIXME: clean up "foo" here */
return PTR_ERR(s);
}
ret = pinctrl_select_state(foo->s);
if (ret < 0) {
pinctrl_put(foo->p);
/* FIXME: clean up "foo" here */
return ret;
}
}
foo_remove()
{
pinctrl_put(state->p);
}
This get/lookup/select/put sequence can just as well be handled by bus drivers
if you don't want each and every driver to handle it and you know the
arrangement on your bus.
......@@ -1029,6 +1015,11 @@ The semantics of the pinctrl APIs are:
kernel memory to hold the pinmux state. All mapping table parsing or similar
slow operations take place within this API.
- devm_pinctrl_get() is a variant of pinctrl_get() that causes pinctrl_put()
to be called automatically on the retrieved pointer when the associated
device is removed. It is recommended to use this function over plain
pinctrl_get().
- pinctrl_lookup_state() is called in process context to obtain a handle to a
specific state for a the client device. This operation may be slow too.
......@@ -1041,14 +1032,30 @@ The semantics of the pinctrl APIs are:
- pinctrl_put() frees all information associated with a pinctrl handle.
- devm_pinctrl_put() is a variant of pinctrl_put() that may be used to
explicitly destroy a pinctrl object returned by devm_pinctrl_get().
However, use of this function will be rare, due to the automatic cleanup
that will occur even without calling it.
pinctrl_get() must be paired with a plain pinctrl_put().
pinctrl_get() may not be paired with devm_pinctrl_put().
devm_pinctrl_get() can optionally be paired with devm_pinctrl_put().
devm_pinctrl_get() may not be paired with plain pinctrl_put().
Usually the pin control core handled the get/put pair and call out to the
device drivers bookkeeping operations, like checking available functions and
the associated pins, whereas the enable/disable pass on to the pin controller
driver which takes care of activating and/or deactivating the mux setting by
quickly poking some registers.
The pins are allocated for your device when you issue the pinctrl_get() call,
after this you should be able to see this in the debugfs listing of all pins.
The pins are allocated for your device when you issue the devm_pinctrl_get()
call, after this you should be able to see this in the debugfs listing of all
pins.
NOTE: the pinctrl system will return -EPROBE_DEFER if it cannot find the
requested pinctrl handles, for example if the pinctrl driver has not yet
registered. Thus make sure that the error path in your driver gracefully
cleans up and is ready to retry the probing later in the startup process.
System pin control hogging
......@@ -1094,13 +1101,13 @@ it, disables and releases it, and muxes it in on the pins defined by group B:
#include <linux/pinctrl/consumer.h>
foo_switch()
{
struct pinctrl *p;
struct pinctrl_state *s1, *s2;
struct pinctrl *p;
struct pinctrl_state *s1, *s2;
foo_probe()
{
/* Setup */
p = pinctrl_get(&device);
p = devm_pinctrl_get(&device);
if (IS_ERR(p))
...
......@@ -1111,7 +1118,10 @@ foo_switch()
s2 = pinctrl_lookup_state(foo->p, "pos-B");
if (IS_ERR(s2))
...
}
foo_switch()
{
/* Enable on position A */
ret = pinctrl_select_state(s1);
if (ret < 0)
......@@ -1125,8 +1135,6 @@ foo_switch()
...
...
pinctrl_put(p);
}
The above has to be done from process context.
arch/arm/boot/dts/tegra-cardhu.dts
View file @ bd69e273
......@@ -10,6 +10,50 @@ memory {
reg = < 0x80000000 0x40000000 >;
};
pinmux@70000000 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
sdmmc1_clk_pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
sdmmc1_cmd_pz1 {
nvidia,pins = "sdmmc1_cmd_pz1",
"sdmmc1_dat0_py7",
"sdmmc1_dat1_py6",
"sdmmc1_dat2_py5",
"sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
sdmmc4_dat0_paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
"sdmmc4_dat1_paa1",
"sdmmc4_dat2_paa2",
"sdmmc4_dat3_paa3",
"sdmmc4_dat4_paa4",
"sdmmc4_dat5_paa5",
"sdmmc4_dat6_paa6",
"sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
};
};
serial@70006000 {
clock-frequency = < 408000000 >;
};
......
arch/arm/boot/dts/tegra-harmony.dts
View file @ bd69e273
......@@ -10,6 +10,230 @@ memory@0 {
reg = < 0x00000000 0x40000000 >;
};
pinmux@70000000 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ata {
nvidia,pins = "ata";
nvidia,function = "ide";
};
atb {
nvidia,pins = "atb", "gma", "gme";
nvidia,function = "sdio4";
};
atc {
nvidia,pins = "atc";
nvidia,function = "nand";
};
atd {
nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu",
"spia", "spib", "spic";
nvidia,function = "gmi";
};
cdev1 {
nvidia,pins = "cdev1";
nvidia,function = "plla_out";
};
cdev2 {
nvidia,pins = "cdev2";
nvidia,function = "pllp_out4";
};
crtp {
nvidia,pins = "crtp";
nvidia,function = "crt";
};
csus {
nvidia,pins = "csus";
nvidia,function = "vi_sensor_clk";
};
dap1 {
nvidia,pins = "dap1";
nvidia,function = "dap1";
};
dap2 {
nvidia,pins = "dap2";
nvidia,function = "dap2";
};
dap3 {
nvidia,pins = "dap3";
nvidia,function = "dap3";
};
dap4 {
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
ddc {
nvidia,pins = "ddc";
nvidia,function = "i2c2";
};
dta {
nvidia,pins = "dta", "dtd";
nvidia,function = "sdio2";
};
dtb {
nvidia,pins = "dtb", "dtc", "dte";
nvidia,function = "rsvd1";
};
dtf {
nvidia,pins = "dtf";
nvidia,function = "i2c3";
};
gmc {
nvidia,pins = "gmc";
nvidia,function = "uartd";
};
gpu7 {
nvidia,pins = "gpu7";
nvidia,function = "rtck";
};
gpv {
nvidia,pins = "gpv", "slxa", "slxk";
nvidia,function = "pcie";
};
hdint {
nvidia,pins = "hdint", "pta";
nvidia,function = "hdmi";
};
i2cp {
nvidia,pins = "i2cp";
nvidia,function = "i2cp";
};
irrx {
nvidia,pins = "irrx", "irtx";
nvidia,function = "uarta";
};
kbca {
nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
"kbce", "kbcf";
nvidia,function = "kbc";
};
lcsn {
nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
"ld3", "ld4", "ld5", "ld6", "ld7",
"ld8", "ld9", "ld10", "ld11", "ld12",
"ld13", "ld14", "ld15", "ld16", "ld17",
"ldc", "ldi", "lhp0", "lhp1", "lhp2",
"lhs", "lm0", "lm1", "lpp", "lpw0",
"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
"lsda", "lsdi", "lspi", "lvp0", "lvp1",
"lvs";
nvidia,function = "displaya";
};
owc {
nvidia,pins = "owc", "spdi", "spdo", "uac";
nvidia,function = "rsvd2";
};
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
};
rm {
nvidia,pins = "rm";
nvidia,function = "i2c1";
};
sdb {
nvidia,pins = "sdb", "sdc", "sdd";
nvidia,function = "pwm";
};
sdio1 {
nvidia,pins = "sdio1";
nvidia,function = "sdio1";
};
slxc {
nvidia,pins = "slxc", "slxd";
nvidia,function = "spdif";
};
spid {
nvidia,pins = "spid", "spie", "spif";
nvidia,function = "spi1";
};
spig {
nvidia,pins = "spig", "spih";
nvidia,function = "spi2_alt";
};
uaa {
nvidia,pins = "uaa", "uab", "uda";
nvidia,function = "ulpi";
};
uad {
nvidia,pins = "uad";
nvidia,function = "irda";
};
uca {
nvidia,pins = "uca", "ucb";
nvidia,function = "uartc";
};
conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd", "ate",
"cdev1", "cdev2", "dap1", "dtb", "gma",
"gmb", "gmc", "gmd", "gme", "gpu7",
"gpv", "i2cp", "pta", "rm", "slxa",
"slxk", "spia", "spib", "uac";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
nvidia,pull = <0>;
};
conf_csus {
nvidia,pins = "csus", "spid", "spif";
nvidia,pull = <1>;
nvidia,tristate = <1>;
};
conf_crtp {
nvidia,pins = "crtp", "dap2", "dap3", "dap4",
"dtc", "dte", "dtf", "gpu", "sdio1",
"slxc", "slxd", "spdi", "spdo", "spig",
"uda";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
conf_ddc {
nvidia,pins = "ddc", "dta", "dtd", "kbca",
"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
"sdc";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
conf_hdint {
nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
"lpw1", "lsc1", "lsck", "lsda", "lsdi",
"lvp0", "owc", "sdb";
nvidia,tristate = <1>;
};
conf_irrx {
nvidia,pins = "irrx", "irtx", "sdd", "spic",
"spie", "spih", "uaa", "uab", "uad",
"uca", "ucb";
nvidia,pull = <2>;
nvidia,tristate = <1>;
};
conf_lc {
nvidia,pins = "lc", "ls";
nvidia,pull = <2>;
};
conf_ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
"ld5", "ld6", "ld7", "ld8", "ld9",
"ld10", "ld11", "ld12", "ld13", "ld14",
"ld15", "ld16", "ld17", "ldi", "lhp0",
"lhp1", "lhp2", "lhs", "lm0", "lpp",
"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
"lvs", "pmc";
nvidia,tristate = <0>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
nvidia,pull = <1>;
};
};
};
pmc@7000f400 {
nvidia,invert-interrupt;
};
......@@ -112,4 +336,8 @@ sdhci@c8000600 {
power-gpios = <&gpio 70 0>; /* gpio PI6 */
support-8bit;
};
usb@c5004000 {
nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
};
};
arch/arm/boot/dts/tegra-paz00.dts
View file @ bd69e273
......@@ -10,6 +10,222 @@ memory@0 {
reg = <0x00000000 0x20000000>;
};
pinmux@70000000 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ata {
nvidia,pins = "ata", "atc", "atd", "ate",
"dap2", "gmb", "gmc", "gmd", "spia",
"spib", "spic", "spid", "spie";
nvidia,function = "gmi";
};
atb {
nvidia,pins = "atb", "gma", "gme";
nvidia,function = "sdio4";
};
cdev1 {
nvidia,pins = "cdev1";
nvidia,function = "plla_out";
};
cdev2 {
nvidia,pins = "cdev2";
nvidia,function = "pllp_out4";
};
crtp {
nvidia,pins = "crtp";
nvidia,function = "crt";
};
csus {
nvidia,pins = "csus";
nvidia,function = "pllc_out1";
};
dap1 {
nvidia,pins = "dap1";
nvidia,function = "dap1";
};
dap3 {
nvidia,pins = "dap3";
nvidia,function = "dap3";
};
dap4 {
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
ddc {
nvidia,pins = "ddc";
nvidia,function = "i2c2";
};
dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
nvidia,function = "rsvd1";
};
dtf {
nvidia,pins = "dtf";
nvidia,function = "i2c3";
};
gpu {
nvidia,pins = "gpu", "sdb", "sdd";
nvidia,function = "pwm";
};
gpu7 {
nvidia,pins = "gpu7";
nvidia,function = "rtck";
};
gpv {
nvidia,pins = "gpv", "slxa", "slxk";
nvidia,function = "pcie";
};
hdint {
nvidia,pins = "hdint", "pta";
nvidia,function = "hdmi";
};
i2cp {
nvidia,pins = "i2cp";
nvidia,function = "i2cp";
};
irrx {
nvidia,pins = "irrx", "irtx";
nvidia,function = "uarta";
};
kbca {
nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
nvidia,function = "kbc";
};
kbcb {
nvidia,pins = "kbcb", "kbcd";
nvidia,function = "sdio2";
};
lcsn {
nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
"ld3", "ld4", "ld5", "ld6", "ld7",
"ld8", "ld9", "ld10", "ld11", "ld12",
"ld13", "ld14", "ld15", "ld16", "ld17",
"ldc", "ldi", "lhp0", "lhp1", "lhp2",
"lhs", "lm0", "lm1", "lpp", "lpw0",
"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
"lsda", "lsdi", "lspi", "lvp0", "lvp1",
"lvs";
nvidia,function = "displaya";
};
owc {
nvidia,pins = "owc";
nvidia,function = "owr";
};
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
};
rm {
nvidia,pins = "rm";
nvidia,function = "i2c1";
};
sdc {
nvidia,pins = "sdc";
nvidia,function = "twc";
};
sdio1 {
nvidia,pins = "sdio1";
nvidia,function = "sdio1";
};
slxc {
nvidia,pins = "slxc", "slxd";
nvidia,function = "spi4";
};
spdi {
nvidia,pins = "spdi", "spdo";
nvidia,function = "rsvd2";
};
spif {
nvidia,pins = "spif", "uac";
nvidia,function = "rsvd4";
};
spig {
nvidia,pins = "spig", "spih";
nvidia,function = "spi2_alt";
};
uaa {
nvidia,pins = "uaa", "uab", "uda";
nvidia,function = "ulpi";
};
uad {
nvidia,pins = "uad";
nvidia,function = "spdif";
};
uca {
nvidia,pins = "uca", "ucb";
nvidia,function = "uartc";
};
conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd", "ate",
"cdev1", "cdev2", "dap1", "dap2", "dtf",
"gma", "gmb", "gmc", "gmd", "gme",
"gpu", "gpu7", "gpv", "i2cp", "pta",
"rm", "sdio1", "slxk", "spdo", "uac",
"uda";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
nvidia,pull = <0>;
};
conf_crtp {
nvidia,pins = "crtp", "dap3", "dap4", "dtb",
"dtc", "dte", "slxa", "slxc", "slxd",
"spdi";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
conf_csus {
nvidia,pins = "csus", "spia", "spib", "spid",
"spif";
nvidia,pull = <1>;
nvidia,tristate = <1>;
};
conf_ddc {
nvidia,pins = "ddc", "irrx", "irtx", "kbca",
"kbcb", "kbcc", "kbcd", "kbce", "kbcf",
"spic", "spig", "uaa", "uab";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
conf_dta {
nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd",
"spie", "spih", "uad", "uca", "ucb";
nvidia,pull = <2>;
nvidia,tristate = <1>;
};
conf_hdint {
nvidia,pins = "hdint", "ld0", "ld1", "ld2",
"ld3", "ld4", "ld5", "ld6", "ld7",
"ld8", "ld9", "ld10", "ld11", "ld12",
"ld13", "ld14", "ld15", "ld16", "ld17",
"ldc", "ldi", "lhs", "lsc0", "lspi",
"lvs", "pmc";
nvidia,tristate = <0>;
};
conf_lc {
nvidia,pins = "lc", "ls";
nvidia,pull = <2>;
};
conf_lcsn {
nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2",
"lm0", "lm1", "lpp", "lpw0", "lpw1",
"lpw2", "lsc1", "lsck", "lsda", "lsdi",
"lvp0", "lvp1", "sdb";
nvidia,tristate = <1>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
nvidia,pull = <1>;
};
};
};
i2c@7000c000 {
clock-frequency = <400000>;
......@@ -131,4 +347,8 @@ wifi {
linux,default-trigger = "rfkill0";
};
};
usb@c5004000 {
nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
};
};
arch/arm/boot/dts/tegra-seaboard.dts
View file @ bd69e273
......@@ -11,6 +11,249 @@ memory {
reg = < 0x00000000 0x40000000 >;
};
pinmux@70000000 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ata {
nvidia,pins = "ata";
nvidia,function = "ide";
};
atb {
nvidia,pins = "atb", "gma", "gme";
nvidia,function = "sdio4";
};
atc {
nvidia,pins = "atc";
nvidia,function = "nand";
};
atd {
nvidia,pins = "atd", "ate", "gmb", "spia",
"spib", "spic";
nvidia,function = "gmi";
};
cdev1 {
nvidia,pins = "cdev1";
nvidia,function = "plla_out";
};
cdev2 {
nvidia,pins = "cdev2";
nvidia,function = "pllp_out4";
};
crtp {
nvidia,pins = "crtp", "lm1";
nvidia,function = "crt";
};
csus {
nvidia,pins = "csus";
nvidia,function = "vi_sensor_clk";
};
dap1 {
nvidia,pins = "dap1";
nvidia,function = "dap1";
};
dap2 {
nvidia,pins = "dap2";
nvidia,function = "dap2";
};
dap3 {
nvidia,pins = "dap3";
nvidia,function = "dap3";
};
dap4 {
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
ddc {
nvidia,pins = "ddc", "owc", "spdi", "spdo",
"uac";
nvidia,function = "rsvd2";
};
dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
nvidia,function = "vi";
};
dtf {
nvidia,pins = "dtf";
nvidia,function = "i2c3";
};
gmc {
nvidia,pins = "gmc";
nvidia,function = "uartd";
};
gmd {
nvidia,pins = "gmd";
nvidia,function = "sflash";
};
gpu {
nvidia,pins = "gpu";
nvidia,function = "pwm";
};
gpu7 {
nvidia,pins = "gpu7";
nvidia,function = "rtck";
};
gpv {
nvidia,pins = "gpv", "slxa", "slxk";
nvidia,function = "pcie";
};
hdint {
nvidia,pins = "hdint", "lpw0", "lpw2", "lsc1",
"lsck", "lsda", "pta";
nvidia,function = "hdmi";
};
i2cp {
nvidia,pins = "i2cp";
nvidia,function = "i2cp";
};
irrx {
nvidia,pins = "irrx", "irtx";
nvidia,function = "uartb";
};
kbca {
nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
"kbce", "kbcf";
nvidia,function = "kbc";
};
lcsn {
nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
"lsdi", "lvp0";
nvidia,function = "rsvd4";
};
ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
"ld5", "ld6", "ld7", "ld8", "ld9",
"ld10", "ld11", "ld12", "ld13", "ld14",
"ld15", "ld16", "ld17", "ldi", "lhp0",
"lhp1", "lhp2", "lhs", "lpp", "lsc0",
"lspi", "lvp1", "lvs";
nvidia,function = "displaya";
};
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
};
rm {
nvidia,pins = "rm";
nvidia,function = "i2c1";
};
sdb {
nvidia,pins = "sdb", "sdc", "sdd";
nvidia,function = "sdio3";
};
sdio1 {
nvidia,pins = "sdio1";
nvidia,function = "sdio1";
};
slxc {
nvidia,pins = "slxc", "slxd";
nvidia,function = "spdif";
};
spid {
nvidia,pins = "spid", "spie", "spif";
nvidia,function = "spi1";
};
spig {
nvidia,pins = "spig", "spih";
nvidia,function = "spi2_alt";
};
uaa {
nvidia,pins = "uaa", "uab", "uda";
nvidia,function = "ulpi";
};
uad {
nvidia,pins = "uad";
nvidia,function = "irda";
};
uca {
nvidia,pins = "uca", "ucb";
nvidia,function = "uartc";
};
conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd",
"cdev1", "cdev2", "dap1", "dap2",
"dap4", "dtf", "gma", "gmc", "gmd",
"gme", "gpu", "gpu7", "i2cp", "irrx",
"irtx", "pta", "rm", "sdc", "sdd",
"slxd", "slxk", "spdi", "spdo", "uac",
"uad", "uca", "ucb", "uda";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
conf_ate {
nvidia,pins = "ate", "csus", "dap3", "ddc",
"gpv", "owc", "slxc", "spib", "spid",
"spie";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
nvidia,pull = <0>;
};
conf_crtp {
nvidia,pins = "crtp", "gmb", "slxa", "spia",
"spig", "spih";
nvidia,pull = <2>;
nvidia,tristate = <1>;
};
conf_dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd";
nvidia,pull = <1>;
nvidia,tristate = <0>;
};
conf_dte {
nvidia,pins = "dte", "spif";
nvidia,pull = <1>;
nvidia,tristate = <1>;
};
conf_hdint {
nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
"lpw1", "lsc1", "lsck", "lsda", "lsdi",
"lvp0";
nvidia,tristate = <1>;
};
conf_kbca {
nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
"kbce", "kbcf", "sdio1", "spic", "uaa",
"uab";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
conf_lc {
nvidia,pins = "lc", "ls";
nvidia,pull = <2>;
};
conf_ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
"ld5", "ld6", "ld7", "ld8", "ld9",
"ld10", "ld11", "ld12", "ld13", "ld14",
"ld15", "ld16", "ld17", "ldi", "lhp0",
"lhp1", "lhp2", "lhs", "lm0", "lpp",
"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
"lvs", "pmc", "sdb";
nvidia,tristate = <0>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
nvidia,pull = <1>;
};
drive_sdio1 {
nvidia,pins = "drive_sdio1";
nvidia,high-speed-mode = <0>;
nvidia,schmitt = <0>;
nvidia,low-power-mode = <3>;
nvidia,pull-down-strength = <31>;
nvidia,pull-up-strength = <31>;
nvidia,slew-rate-rising = <3>;
nvidia,slew-rate-falling = <3>;
};
};
};
i2c@7000c000 {
clock-frequency = <400000>;
......@@ -172,4 +415,8 @@ emc-table@380000 {
0x00000000 0x00000000 0x00000000 0x00000000 >;
};
};
usb@c5004000 {
nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
};
};
arch/arm/boot/dts/tegra-trimslice.dts
View file @ bd69e273
......@@ -10,6 +10,236 @@ memory@0 {
reg = < 0x00000000 0x40000000 >;
};
pinmux@70000000 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ata {
nvidia,pins = "ata";
nvidia,function = "ide";
};
atb {
nvidia,pins = "atb", "gma";
nvidia,function = "sdio4";
};
atc {
nvidia,pins = "atc", "gmb";
nvidia,function = "nand";
};
atd {
nvidia,pins = "atd", "ate", "gme", "pta";
nvidia,function = "gmi";
};
cdev1 {
nvidia,pins = "cdev1";
nvidia,function = "plla_out";
};
cdev2 {
nvidia,pins = "cdev2";
nvidia,function = "pllp_out4";
};
crtp {
nvidia,pins = "crtp";
nvidia,function = "crt";
};
csus {
nvidia,pins = "csus";
nvidia,function = "vi_sensor_clk";
};
dap1 {
nvidia,pins = "dap1";
nvidia,function = "dap1";
};
dap2 {
nvidia,pins = "dap2";
nvidia,function = "dap2";
};
dap3 {
nvidia,pins = "dap3";
nvidia,function = "dap3";
};
dap4 {
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
ddc {
nvidia,pins = "ddc";
nvidia,function = "i2c2";
};
dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
nvidia,function = "vi";
};
dtf {
nvidia,pins = "dtf";
nvidia,function = "i2c3";
};
gmc {
nvidia,pins = "gmc", "gmd";
nvidia,function = "sflash";
};
gpu {
nvidia,pins = "gpu";
nvidia,function = "uarta";
};
gpu7 {
nvidia,pins = "gpu7";
nvidia,function = "rtck";
};
gpv {
nvidia,pins = "gpv", "slxa", "slxk";
nvidia,function = "pcie";
};
hdint {
nvidia,pins = "hdint";
nvidia,function = "hdmi";
};
i2cp {
nvidia,pins = "i2cp";
nvidia,function = "i2cp";
};
irrx {
nvidia,pins = "irrx", "irtx";
nvidia,function = "uartb";
};
kbca {
nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
"kbce", "kbcf";
nvidia,function = "kbc";
};
lcsn {
nvidia,pins = "lcsn", "ld0", "ld1", "ld2",
"ld3", "ld4", "ld5", "ld6", "ld7",
"ld8", "ld9", "ld10", "ld11", "ld12",
"ld13", "ld14", "ld15", "ld16", "ld17",
"ldc", "ldi", "lhp0", "lhp1", "lhp2",
"lhs", "lm0", "lm1", "lpp", "lpw0",
"lpw1", "lpw2", "lsc0", "lsc1", "lsck",
"lsda", "lsdi", "lspi", "lvp0", "lvp1",
"lvs";
nvidia,function = "displaya";
};
owc {
nvidia,pins = "owc", "uac";
nvidia,function = "rsvd2";
};
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
};
rm {
nvidia,pins = "rm";
nvidia,function = "i2c1";
};
sdb {
nvidia,pins = "sdb", "sdc", "sdd";
nvidia,function = "pwm";
};
sdio1 {
nvidia,pins = "sdio1";
nvidia,function = "sdio1";
};
slxc {
nvidia,pins = "slxc", "slxd";
nvidia,function = "sdio3";
};
spdi {
nvidia,pins = "spdi", "spdo";
nvidia,function = "spdif";
};
spia {
nvidia,pins = "spia", "spib", "spic";
nvidia,function = "spi2";
};
spid {
nvidia,pins = "spid", "spie", "spif";
nvidia,function = "spi1";
};
spig {
nvidia,pins = "spig", "spih";
nvidia,function = "spi2_alt";
};
uaa {
nvidia,pins = "uaa", "uab", "uda";
nvidia,function = "ulpi";
};
uad {
nvidia,pins = "uad";
nvidia,function = "irda";
};
uca {
nvidia,pins = "uca", "ucb";
nvidia,function = "uartc";
};
conf_ata {
nvidia,pins = "ata", "atc", "atd", "ate",
"crtp", "dap2", "dap3", "dap4", "dta",
"dtb", "dtc", "dtd", "dte", "gmb",
"gme", "i2cp", "pta", "slxc", "slxd",
"spdi", "spdo", "uda";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
conf_atb {
nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
"gma", "gmc", "gmd", "gpu", "gpu7",
"gpv", "sdio1", "slxa", "slxk", "uac";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
nvidia,pull = <0>;
};
conf_csus {
nvidia,pins = "csus", "spia", "spib",
"spid", "spif";
nvidia,pull = <1>;
nvidia,tristate = <1>;
};
conf_ddc {
nvidia,pins = "ddc", "dtf", "rm", "sdc", "sdd";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
conf_hdint {
nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
"lpw1", "lsc1", "lsck", "lsda", "lsdi",
"lvp0", "pmc";
nvidia,tristate = <1>;
};
conf_irrx {
nvidia,pins = "irrx", "irtx", "kbca", "kbcb",
"kbcc", "kbcd", "kbce", "kbcf", "owc",
"spic", "spie", "spig", "spih", "uaa",
"uab", "uad", "uca", "ucb";
nvidia,pull = <2>;
nvidia,tristate = <1>;
};
conf_lc {
nvidia,pins = "lc", "ls";
nvidia,pull = <2>;
};
conf_ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
"ld5", "ld6", "ld7", "ld8", "ld9",
"ld10", "ld11", "ld12", "ld13", "ld14",
"ld15", "ld16", "ld17", "ldi", "lhp0",
"lhp1", "lhp2", "lhs", "lm0", "lpp",
"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
"lvs", "sdb";
nvidia,tristate = <0>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
nvidia,pull = <1>;
};
};
};
i2c@7000c000 {
clock-frequency = <400000>;
};
......@@ -74,4 +304,8 @@ sdhci@c8000600 {
cd-gpios = <&gpio 121 0>;
wp-gpios = <&gpio 122 0>;
};
usb@c5004000 {
nvidia,phy-reset-gpio = <&gpio 168 0>; /* gpio PV0 */
};
};
arch/arm/boot/dts/tegra-ventana.dts
View file @ bd69e273
......@@ -10,6 +10,236 @@ memory {
reg = < 0x00000000 0x40000000 >;
};
pinmux@70000000 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ata {
nvidia,pins = "ata";
nvidia,function = "ide";
};
atb {
nvidia,pins = "atb", "gma", "gme";
nvidia,function = "sdio4";
};
atc {
nvidia,pins = "atc";
nvidia,function = "nand";
};
atd {
nvidia,pins = "atd", "ate", "gmb", "spia",
"spib", "spic";
nvidia,function = "gmi";
};
cdev1 {
nvidia,pins = "cdev1";
nvidia,function = "plla_out";
};
cdev2 {
nvidia,pins = "cdev2";
nvidia,function = "pllp_out4";
};
crtp {
nvidia,pins = "crtp", "lm1";
nvidia,function = "crt";
};
csus {
nvidia,pins = "csus";
nvidia,function = "vi_sensor_clk";
};
dap1 {
nvidia,pins = "dap1";
nvidia,function = "dap1";
};
dap2 {
nvidia,pins = "dap2";
nvidia,function = "dap2";
};
dap3 {
nvidia,pins = "dap3";
nvidia,function = "dap3";
};
dap4 {
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
ddc {
nvidia,pins = "ddc", "owc", "spdi", "spdo",
"uac";
nvidia,function = "rsvd2";
};
dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
nvidia,function = "vi";
};
dtf {
nvidia,pins = "dtf";
nvidia,function = "i2c3";
};
gmc {
nvidia,pins = "gmc";
nvidia,function = "uartd";
};
gmd {
nvidia,pins = "gmd";
nvidia,function = "sflash";
};
gpu {
nvidia,pins = "gpu";
nvidia,function = "pwm";
};
gpu7 {
nvidia,pins = "gpu7";
nvidia,function = "rtck";
};
gpv {
nvidia,pins = "gpv", "slxa", "slxk";
nvidia,function = "pcie";
};
hdint {
nvidia,pins = "hdint", "pta";
nvidia,function = "hdmi";
};
i2cp {
nvidia,pins = "i2cp";
nvidia,function = "i2cp";
};
irrx {
nvidia,pins = "irrx", "irtx";
nvidia,function = "uartb";
};
kbca {
nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
"kbce", "kbcf";
nvidia,function = "kbc";
};
lcsn {
nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
"lsdi", "lvp0";
nvidia,function = "rsvd4";
};
ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
"ld5", "ld6", "ld7", "ld8", "ld9",
"ld10", "ld11", "ld12", "ld13", "ld14",
"ld15", "ld16", "ld17", "ldi", "lhp0",
"lhp1", "lhp2", "lhs", "lpp", "lpw0",
"lpw2", "lsc0", "lsc1", "lsck", "lsda",
"lspi", "lvp1", "lvs";
nvidia,function = "displaya";
};
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
};
rm {
nvidia,pins = "rm";
nvidia,function = "i2c1";
};
sdb {
nvidia,pins = "sdb", "sdc", "sdd", "slxc";
nvidia,function = "sdio3";
};
sdio1 {
nvidia,pins = "sdio1";
nvidia,function = "sdio1";
};
slxd {
nvidia,pins = "slxd";
nvidia,function = "spdif";
};
spid {
nvidia,pins = "spid", "spie", "spif";
nvidia,function = "spi1";
};
spig {
nvidia,pins = "spig", "spih";
nvidia,function = "spi2_alt";
};
uaa {
nvidia,pins = "uaa", "uab", "uda";
nvidia,function = "ulpi";
};
uad {
nvidia,pins = "uad";
nvidia,function = "irda";
};
uca {
nvidia,pins = "uca", "ucb";
nvidia,function = "uartc";
};
conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd",
"cdev1", "cdev2", "dap1", "dap2",
"dap4", "ddc", "dtf", "gma", "gmc",
"gme", "gpu", "gpu7", "i2cp", "irrx",
"irtx", "pta", "rm", "sdc", "sdd",
"slxc", "slxd", "slxk", "spdi", "spdo",
"uac", "uad", "uca", "ucb", "uda";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
conf_ate {
nvidia,pins = "ate", "csus", "dap3", "gmd",
"gpv", "owc", "spia", "spib", "spic",
"spid", "spie", "spig";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
nvidia,pull = <0>;
};
conf_crtp {
nvidia,pins = "crtp", "gmb", "slxa", "spih";
nvidia,pull = <2>;
nvidia,tristate = <1>;
};
conf_dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd";
nvidia,pull = <1>;
nvidia,tristate = <0>;
};
conf_dte {
nvidia,pins = "dte", "spif";
nvidia,pull = <1>;
nvidia,tristate = <1>;
};
conf_hdint {
nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
"lpw1", "lsck", "lsda", "lsdi", "lvp0";
nvidia,tristate = <1>;
};
conf_kbca {
nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
"kbce", "kbcf", "sdio1", "uaa", "uab";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
conf_lc {
nvidia,pins = "lc", "ls";
nvidia,pull = <2>;
};
conf_ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
"ld5", "ld6", "ld7", "ld8", "ld9",
"ld10", "ld11", "ld12", "ld13", "ld14",
"ld15", "ld16", "ld17", "ldi", "lhp0",
"lhp1", "lhp2", "lhs", "lm0", "lpp",
"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
"lvp1", "lvs", "pmc", "sdb";
nvidia,tristate = <0>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
nvidia,pull = <1>;
};
};
};
i2c@7000c000 {
clock-frequency = <400000>;
......@@ -105,4 +335,8 @@ sdhci@c8000400 {
sdhci@c8000600 {
support-8bit;
};
usb@c5004000 {
nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
};
};
arch/arm/mach-tegra/Makefile
View file @ bd69e273
......@@ -5,7 +5,6 @@ obj-y += io.o
obj-y += irq.o
obj-y += clock.o
obj-y += timer.o
obj-y += pinmux.o
obj-y += fuse.o
obj-y += pmc.o
obj-y += flowctrl.o
......@@ -14,8 +13,6 @@ obj-$(CONFIG_CPU_IDLE) += sleep.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += powergate.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pinmux-tegra20-tables.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pinmux-tegra30-tables.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
......
arch/arm/mach-tegra/board-dt-tegra20.c
View file @ bd69e273
......@@ -47,15 +47,7 @@
#include "clock.h"
#include "devices.h"
void harmony_pinmux_init(void);
void paz00_pinmux_init(void);
void seaboard_pinmux_init(void);
void trimslice_pinmux_init(void);
void ventana_pinmux_init(void);
struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("nvidia,tegra20-pinmux", TEGRA_APB_MISC_BASE + 0x14, "tegra-pinmux", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-gpio", TEGRA_GPIO_BASE, "tegra-gpio", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC3_BASE, "sdhci-tegra.2", NULL),
......@@ -95,33 +87,10 @@ static struct of_device_id tegra_dt_match_table[] __initdata = {
{}
};
static struct {
char *machine;
void (*init)(void);
} pinmux_configs[] = {
{ "compulab,trimslice", trimslice_pinmux_init },
{ "nvidia,harmony", harmony_pinmux_init },
{ "compal,paz00", paz00_pinmux_init },
{ "nvidia,seaboard", seaboard_pinmux_init },
{ "nvidia,ventana", ventana_pinmux_init },
};
static void __init tegra_dt_init(void)
{
int i;
tegra_clk_init_from_table(tegra_dt_clk_init_table);
for (i = 0; i < ARRAY_SIZE(pinmux_configs); i++) {
if (of_machine_is_compatible(pinmux_configs[i].machine)) {
pinmux_configs[i].init();
break;
}
}
WARN(i == ARRAY_SIZE(pinmux_configs),
"Unknown platform! Pinmuxing not initialized\n");
/*
* Finished with the static registrations now; fill in the missing
* devices
......
arch/arm/mach-tegra/board-harmony-pinmux.c
View file @ bd69e273
This diff is collapsed.
arch/arm/mach-tegra/board-paz00-pinmux.c
View file @ bd69e273
This diff is collapsed.
arch/arm/mach-tegra/board-paz00.c
View file @ bd69e273
......@@ -159,6 +159,8 @@ static void paz00_i2c_init(void)
static void paz00_usb_init(void)
{
tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_ULPI_RST;
platform_device_register(&tegra_ehci2_device);
platform_device_register(&tegra_ehci3_device);
}
......@@ -176,7 +178,6 @@ static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
{ "uarta", "pll_p", 216000000, true },
{ "uartc", "pll_p", 216000000, true },
{ "pll_p_out4", "pll_p", 24000000, true },
{ "usbd", "clk_m", 12000000, false },
{ "usb2", "clk_m", 12000000, false },
{ "usb3", "clk_m", 12000000, false },
......
arch/arm/mach-tegra/board-pinmux.c
View file @ bd69e273
/*
* Copyright (c) 2011, NVIDIA CORPORATION. All rights reserved.
* Copyright (c) 2011,2012, NVIDIA CORPORATION. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
......@@ -15,75 +15,59 @@
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/notifier.h>
#include <linux/of.h>
#include <linux/string.h>
#include <mach/gpio-tegra.h>
#include <mach/pinmux.h>
#include "board-pinmux.h"
#include "devices.h"
struct tegra_board_pinmux_conf *confs[2];
static void tegra_board_pinmux_setup_gpios(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(confs); i++) {
if (!confs[i])
continue;
tegra_gpio_config(confs[i]->gpios, confs[i]->gpio_count);
}
}
static void tegra_board_pinmux_setup_pinmux(void)
{
int i;
unsigned long tegra_pincfg_pullnone_driven[2] = {
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_NONE),
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_DRIVEN),
};
for (i = 0; i < ARRAY_SIZE(confs); i++) {
if (!confs[i])
continue;
unsigned long tegra_pincfg_pullnone_tristate[2] = {
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_NONE),
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_TRISTATE),
};
tegra_pinmux_config_table(confs[i]->pgs, confs[i]->pg_count);
unsigned long tegra_pincfg_pullnone_na[1] = {
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_NONE),
};
if (confs[i]->drives)
tegra_drive_pinmux_config_table(confs[i]->drives,
confs[i]->drive_count);
}
}
unsigned long tegra_pincfg_pullup_driven[2] = {
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_UP),
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_DRIVEN),
};
static int tegra_board_pinmux_bus_notify(struct notifier_block *nb,
unsigned long event, void *vdev)
{
static bool had_gpio;
static bool had_pinmux;
unsigned long tegra_pincfg_pullup_tristate[2] = {
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_UP),
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_TRISTATE),
};
struct device *dev = vdev;
const char *devname;
unsigned long tegra_pincfg_pullup_na[1] = {
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_UP),
};
if (event != BUS_NOTIFY_BOUND_DRIVER)
return NOTIFY_DONE;
unsigned long tegra_pincfg_pulldown_driven[2] = {
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_DOWN),
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_DRIVEN),
};
devname = dev_name(dev);
unsigned long tegra_pincfg_pulldown_tristate[2] = {
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_DOWN),
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_TRISTATE),
};
if (!had_gpio && !strcmp(devname, GPIO_DEV)) {
tegra_board_pinmux_setup_gpios();
had_gpio = true;
} else if (!had_pinmux && !strcmp(devname, PINMUX_DEV)) {
tegra_board_pinmux_setup_pinmux();
had_pinmux = true;
}
unsigned long tegra_pincfg_pulldown_na[1] = {
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_PULL, TEGRA_PINCONFIG_PULL_DOWN),
};
if (had_gpio && had_pinmux)
return NOTIFY_STOP_MASK;
else
return NOTIFY_DONE;
}
unsigned long tegra_pincfg_pullna_driven[1] = {
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_DRIVEN),
};
static struct notifier_block nb = {
.notifier_call = tegra_board_pinmux_bus_notify,
unsigned long tegra_pincfg_pullna_tristate[1] = {
TEGRA_PINCONF_PACK(TEGRA_PINCONF_PARAM_TRISTATE, TEGRA_PINCONFIG_TRISTATE),
};
static struct platform_device *devices[] = {
......@@ -94,11 +78,10 @@ static struct platform_device *devices[] = {
void tegra_board_pinmux_init(struct tegra_board_pinmux_conf *conf_a,
struct tegra_board_pinmux_conf *conf_b)
{
confs[0] = conf_a;
confs[1] = conf_b;
bus_register_notifier(&platform_bus_type, &nb);
if (conf_a)
pinctrl_register_mappings(conf_a->maps, conf_a->map_count);
if (conf_b)
pinctrl_register_mappings(conf_b->maps, conf_b->map_count);
if (!of_machine_is_compatible("nvidia,tegra20"))
platform_add_devices(devices, ARRAY_SIZE(devices));
}
arch/arm/mach-tegra/board-pinmux.h
View file @ bd69e273
/*
* Copyright (c) 2011, NVIDIA CORPORATION. All rights reserved.
* Copyright (c) 2011,2012, NVIDIA CORPORATION. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
......@@ -15,21 +15,37 @@
#ifndef __MACH_TEGRA_BOARD_PINMUX_H
#define __MACH_TEGRA_BOARD_PINMUX_H
#define GPIO_DEV "tegra-gpio"
#define PINMUX_DEV "tegra-pinmux"
#include <linux/pinctrl/machine.h>
struct tegra_pingroup_config;
struct tegra_gpio_table;
#include <mach/pinconf-tegra.h>
struct tegra_board_pinmux_conf {
struct tegra_pingroup_config *pgs;
int pg_count;
#define PINMUX_DEV "tegra20-pinctrl"
#define TEGRA_MAP_MUX(_group_, _function_) \
PIN_MAP_MUX_GROUP_HOG_DEFAULT(PINMUX_DEV, _group_, _function_)
#define TEGRA_MAP_CONF(_group_, _pull_, _drive_) \
PIN_MAP_CONFIGS_GROUP_HOG_DEFAULT(PINMUX_DEV, _group_, tegra_pincfg_pull##_pull_##_##_drive_)
struct tegra_drive_pingroup_config *drives;
int drive_count;
#define TEGRA_MAP_MUXCONF(_group_, _function_, _pull_, _drive_) \
TEGRA_MAP_MUX(_group_, _function_), \
TEGRA_MAP_CONF(_group_, _pull_, _drive_)
struct tegra_gpio_table *gpios;
int gpio_count;
extern unsigned long tegra_pincfg_pullnone_driven[2];
extern unsigned long tegra_pincfg_pullnone_tristate[2];
extern unsigned long tegra_pincfg_pullnone_na[1];
extern unsigned long tegra_pincfg_pullup_driven[2];
extern unsigned long tegra_pincfg_pullup_tristate[2];
extern unsigned long tegra_pincfg_pullup_na[1];
extern unsigned long tegra_pincfg_pulldown_driven[2];
extern unsigned long tegra_pincfg_pulldown_tristate[2];
extern unsigned long tegra_pincfg_pulldown_na[1];
extern unsigned long tegra_pincfg_pullna_driven[1];
extern unsigned long tegra_pincfg_pullna_tristate[1];
struct tegra_board_pinmux_conf {
struct pinctrl_map *maps;
int map_count;
};
void tegra_board_pinmux_init(struct tegra_board_pinmux_conf *conf_a,
......
arch/arm/mach-tegra/board-seaboard-pinmux.c
View file @ bd69e273
This diff is collapsed.
arch/arm/mach-tegra/board-seaboard.c
View file @ bd69e273
......@@ -24,6 +24,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/platform_data/tegra_usb.h>
#include <sound/wm8903.h>
......@@ -186,20 +187,10 @@ static struct i2c_board_info __initdata wm8903_device = {
static int seaboard_ehci_init(void)
{
int gpio_status;
struct tegra_ehci_platform_data *pdata;
gpio_status = gpio_request(TEGRA_GPIO_USB1, "VBUS_USB1");
if (gpio_status < 0) {
pr_err("VBUS_USB1 request GPIO FAILED\n");
WARN_ON(1);
}
gpio_status = gpio_direction_output(TEGRA_GPIO_USB1, 1);
if (gpio_status < 0) {
pr_err("VBUS_USB1 request GPIO DIRECTION FAILED\n");
WARN_ON(1);
}
gpio_set_value(TEGRA_GPIO_USB1, 1);
pdata = tegra_ehci1_device.dev.platform_data;
pdata->vbus_gpio = TEGRA_GPIO_USB1;
platform_device_register(&tegra_ehci1_device);
platform_device_register(&tegra_ehci3_device);
......@@ -209,9 +200,6 @@ static int seaboard_ehci_init(void)
static void __init seaboard_i2c_init(void)
{
gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018");
gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ);
isl29018_device.irq = gpio_to_irq(TEGRA_GPIO_ISL29018_IRQ);
i2c_register_board_info(0, &isl29018_device, 1);
......@@ -261,7 +249,6 @@ static void __init tegra_kaen_init(void)
debug_uart_platform_data[0].irq = INT_UARTB;
seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE);
seaboard_common_init();
......
arch/arm/mach-tegra/board-trimslice.c
View file @ bd69e273
......@@ -25,6 +25,7 @@
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/platform_data/tegra_usb.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
......@@ -111,19 +112,15 @@ static void trimslice_i2c_init(void)
static void trimslice_usb_init(void)
{
int err;
struct tegra_ehci_platform_data *pdata;
platform_device_register(&tegra_ehci3_device);
platform_device_register(&tegra_ehci2_device);
pdata = tegra_ehci1_device.dev.platform_data;
pdata->vbus_gpio = TRIMSLICE_GPIO_USB1_MODE;
err = gpio_request_one(TRIMSLICE_GPIO_USB1_MODE, GPIOF_OUT_INIT_HIGH,
"usb1mode");
if (err) {
pr_err("TrimSlice: failed to obtain USB1 mode gpio: %d\n", err);
return;
}
tegra_ehci2_ulpi_phy_config.reset_gpio = TEGRA_GPIO_PV0;
platform_device_register(&tegra_ehci3_device);
platform_device_register(&tegra_ehci2_device);
platform_device_register(&tegra_ehci1_device);
}
......
arch/arm/mach-tegra/common.c
View file @ bd69e273
......@@ -82,10 +82,12 @@ static __initdata struct tegra_clk_init_table tegra20_clk_init_table[] = {
{ "pll_p_out1", "pll_p", 28800000, true },
{ "pll_p_out2", "pll_p", 48000000, true },
{ "pll_p_out3", "pll_p", 72000000, true },
{ "pll_p_out4", "pll_p", 108000000, true },
{ "sclk", "pll_p_out4", 108000000, true },
{ "hclk", "sclk", 108000000, true },
{ "pclk", "hclk", 54000000, true },
{ "pll_p_out4", "pll_p", 24000000, true },
{ "pll_c", "clk_m", 600000000, true },
{ "pll_c_out1", "pll_c", 120000000, true },
{ "sclk", "pll_c_out1", 120000000, true },
{ "hclk", "sclk", 120000000, true },
{ "pclk", "hclk", 60000000, true },
{ "csite", NULL, 0, true },
{ "emc", NULL, 0, true },
{ "cpu", NULL, 0, true },
......
arch/arm/mach-tegra/devices.c
View file @ bd69e273
......@@ -110,7 +110,7 @@ static struct resource pinmux_resource[] = {
};
struct platform_device tegra_pinmux_device = {
.name = "tegra-pinmux",
.name = "tegra20-pinctrl",
.id = -1,
.resource = pinmux_resource,
.num_resources = ARRAY_SIZE(pinmux_resource),
......@@ -439,26 +439,28 @@ static struct resource tegra_usb3_resources[] = {
},
};
static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
/* All existing boards use GPIO PV0 for phy reset */
.reset_gpio = TEGRA_GPIO_PV0,
struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
.reset_gpio = -1,
.clk = "cdev2",
};
struct tegra_ehci_platform_data tegra_ehci1_pdata = {
.operating_mode = TEGRA_USB_OTG,
.power_down_on_bus_suspend = 1,
.vbus_gpio = -1,
};
struct tegra_ehci_platform_data tegra_ehci2_pdata = {
.phy_config = &tegra_ehci2_ulpi_phy_config,
.operating_mode = TEGRA_USB_HOST,
.power_down_on_bus_suspend = 1,
.vbus_gpio = -1,
};
struct tegra_ehci_platform_data tegra_ehci3_pdata = {
.operating_mode = TEGRA_USB_HOST,
.power_down_on_bus_suspend = 1,
.vbus_gpio = -1,
};
static u64 tegra_ehci_dmamask = DMA_BIT_MASK(32);
......
arch/arm/mach-tegra/devices.h
View file @ bd69e273
......@@ -22,6 +22,10 @@
#include <linux/platform_device.h>
#include <linux/platform_data/tegra_usb.h>
#include <mach/usb_phy.h>
extern struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config;
extern struct tegra_ehci_platform_data tegra_ehci1_pdata;
extern struct tegra_ehci_platform_data tegra_ehci2_pdata;
extern struct tegra_ehci_platform_data tegra_ehci3_pdata;
......
arch/arm/mach-tegra/include/mach/gpio-tegra.h
View file @ bd69e273
......@@ -25,13 +25,4 @@
#define TEGRA_NR_GPIOS INT_GPIO_NR
struct tegra_gpio_table {
int gpio; /* GPIO number */
bool enable; /* Enable for GPIO at init? */
};
void tegra_gpio_config(struct tegra_gpio_table *table, int num);
void tegra_gpio_enable(int gpio);
void tegra_gpio_disable(int gpio);
#endif
arch/arm/mach-tegra/include/mach/pinmux-tegra20.h deleted 100644 → 0
View file @ f7269a82
/*
* linux/arch/arm/mach-tegra/include/mach/pinmux-tegra20.h
*
* Copyright (C) 2010 Google, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __MACH_TEGRA_PINMUX_TEGRA20_H
#define __MACH_TEGRA_PINMUX_TEGRA20_H
enum tegra_pingroup {
TEGRA_PINGROUP_ATA = 0,
TEGRA_PINGROUP_ATB,
TEGRA_PINGROUP_ATC,
TEGRA_PINGROUP_ATD,
TEGRA_PINGROUP_ATE,
TEGRA_PINGROUP_CDEV1,
TEGRA_PINGROUP_CDEV2,
TEGRA_PINGROUP_CRTP,
TEGRA_PINGROUP_CSUS,
TEGRA_PINGROUP_DAP1,
TEGRA_PINGROUP_DAP2,
TEGRA_PINGROUP_DAP3,
TEGRA_PINGROUP_DAP4,
TEGRA_PINGROUP_DDC,
TEGRA_PINGROUP_DTA,
TEGRA_PINGROUP_DTB,
TEGRA_PINGROUP_DTC,
TEGRA_PINGROUP_DTD,
TEGRA_PINGROUP_DTE,
TEGRA_PINGROUP_DTF,
TEGRA_PINGROUP_GMA,
TEGRA_PINGROUP_GMB,
TEGRA_PINGROUP_GMC,
TEGRA_PINGROUP_GMD,
TEGRA_PINGROUP_GME,
TEGRA_PINGROUP_GPU,
TEGRA_PINGROUP_GPU7,
TEGRA_PINGROUP_GPV,
TEGRA_PINGROUP_HDINT,
TEGRA_PINGROUP_I2CP,
TEGRA_PINGROUP_IRRX,
TEGRA_PINGROUP_IRTX,
TEGRA_PINGROUP_KBCA,
TEGRA_PINGROUP_KBCB,
TEGRA_PINGROUP_KBCC,
TEGRA_PINGROUP_KBCD,
TEGRA_PINGROUP_KBCE,
TEGRA_PINGROUP_KBCF,
TEGRA_PINGROUP_LCSN,
TEGRA_PINGROUP_LD0,
TEGRA_PINGROUP_LD1,
TEGRA_PINGROUP_LD10,
TEGRA_PINGROUP_LD11,
TEGRA_PINGROUP_LD12,
TEGRA_PINGROUP_LD13,
TEGRA_PINGROUP_LD14,
TEGRA_PINGROUP_LD15,
TEGRA_PINGROUP_LD16,
TEGRA_PINGROUP_LD17,
TEGRA_PINGROUP_LD2,
TEGRA_PINGROUP_LD3,
TEGRA_PINGROUP_LD4,
TEGRA_PINGROUP_LD5,
TEGRA_PINGROUP_LD6,
TEGRA_PINGROUP_LD7,
TEGRA_PINGROUP_LD8,
TEGRA_PINGROUP_LD9,
TEGRA_PINGROUP_LDC,
TEGRA_PINGROUP_LDI,
TEGRA_PINGROUP_LHP0,
TEGRA_PINGROUP_LHP1,
TEGRA_PINGROUP_LHP2,
TEGRA_PINGROUP_LHS,
TEGRA_PINGROUP_LM0,
TEGRA_PINGROUP_LM1,
TEGRA_PINGROUP_LPP,
TEGRA_PINGROUP_LPW0,
TEGRA_PINGROUP_LPW1,
TEGRA_PINGROUP_LPW2,
TEGRA_PINGROUP_LSC0,
TEGRA_PINGROUP_LSC1,
TEGRA_PINGROUP_LSCK,
TEGRA_PINGROUP_LSDA,
TEGRA_PINGROUP_LSDI,
TEGRA_PINGROUP_LSPI,
TEGRA_PINGROUP_LVP0,
TEGRA_PINGROUP_LVP1,
TEGRA_PINGROUP_LVS,
TEGRA_PINGROUP_OWC,
TEGRA_PINGROUP_PMC,
TEGRA_PINGROUP_PTA,
TEGRA_PINGROUP_RM,
TEGRA_PINGROUP_SDB,
TEGRA_PINGROUP_SDC,
TEGRA_PINGROUP_SDD,
TEGRA_PINGROUP_SDIO1,
TEGRA_PINGROUP_SLXA,
TEGRA_PINGROUP_SLXC,
TEGRA_PINGROUP_SLXD,
TEGRA_PINGROUP_SLXK,
TEGRA_PINGROUP_SPDI,
TEGRA_PINGROUP_SPDO,
TEGRA_PINGROUP_SPIA,
TEGRA_PINGROUP_SPIB,
TEGRA_PINGROUP_SPIC,
TEGRA_PINGROUP_SPID,
TEGRA_PINGROUP_SPIE,
TEGRA_PINGROUP_SPIF,
TEGRA_PINGROUP_SPIG,
TEGRA_PINGROUP_SPIH,
TEGRA_PINGROUP_UAA,
TEGRA_PINGROUP_UAB,
TEGRA_PINGROUP_UAC,
TEGRA_PINGROUP_UAD,
TEGRA_PINGROUP_UCA,
TEGRA_PINGROUP_UCB,
TEGRA_PINGROUP_UDA,
/* these pin groups only have pullup and pull down control */
TEGRA_PINGROUP_CK32,
TEGRA_PINGROUP_DDRC,
TEGRA_PINGROUP_PMCA,
TEGRA_PINGROUP_PMCB,
TEGRA_PINGROUP_PMCC,
TEGRA_PINGROUP_PMCD,
TEGRA_PINGROUP_PMCE,
TEGRA_PINGROUP_XM2C,
TEGRA_PINGROUP_XM2D,
TEGRA_MAX_PINGROUP,
};
enum tegra_drive_pingroup {
TEGRA_DRIVE_PINGROUP_AO1 = 0,
TEGRA_DRIVE_PINGROUP_AO2,
TEGRA_DRIVE_PINGROUP_AT1,
TEGRA_DRIVE_PINGROUP_AT2,
TEGRA_DRIVE_PINGROUP_CDEV1,
TEGRA_DRIVE_PINGROUP_CDEV2,
TEGRA_DRIVE_PINGROUP_CSUS,
TEGRA_DRIVE_PINGROUP_DAP1,
TEGRA_DRIVE_PINGROUP_DAP2,
TEGRA_DRIVE_PINGROUP_DAP3,
TEGRA_DRIVE_PINGROUP_DAP4,
TEGRA_DRIVE_PINGROUP_DBG,
TEGRA_DRIVE_PINGROUP_LCD1,
TEGRA_DRIVE_PINGROUP_LCD2,
TEGRA_DRIVE_PINGROUP_SDMMC2,
TEGRA_DRIVE_PINGROUP_SDMMC3,
TEGRA_DRIVE_PINGROUP_SPI,
TEGRA_DRIVE_PINGROUP_UAA,
TEGRA_DRIVE_PINGROUP_UAB,
TEGRA_DRIVE_PINGROUP_UART2,
TEGRA_DRIVE_PINGROUP_UART3,
TEGRA_DRIVE_PINGROUP_VI1,
TEGRA_DRIVE_PINGROUP_VI2,
TEGRA_DRIVE_PINGROUP_XM2A,
TEGRA_DRIVE_PINGROUP_XM2C,
TEGRA_DRIVE_PINGROUP_XM2D,
TEGRA_DRIVE_PINGROUP_XM2CLK,
TEGRA_DRIVE_PINGROUP_MEMCOMP,
TEGRA_DRIVE_PINGROUP_SDIO1,
TEGRA_DRIVE_PINGROUP_CRT,
TEGRA_DRIVE_PINGROUP_DDC,
TEGRA_DRIVE_PINGROUP_GMA,
TEGRA_DRIVE_PINGROUP_GMB,
TEGRA_DRIVE_PINGROUP_GMC,
TEGRA_DRIVE_PINGROUP_GMD,
TEGRA_DRIVE_PINGROUP_GME,
TEGRA_DRIVE_PINGROUP_OWR,
TEGRA_DRIVE_PINGROUP_UAD,
TEGRA_MAX_DRIVE_PINGROUP,
};
#endif
arch/arm/mach-tegra/include/mach/pinmux-tegra30.h deleted 100644 → 0
View file @ f7269a82
/*
* linux/arch/arm/mach-tegra/include/mach/pinmux-tegra30.h
*
* Copyright (C) 2010 Google, Inc.
* Copyright (C) 2010,2011 Nvidia, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __MACH_TEGRA_PINMUX_TEGRA30_H
#define __MACH_TEGRA_PINMUX_TEGRA30_H
enum tegra_pingroup {
TEGRA_PINGROUP_ULPI_DATA0 = 0,
TEGRA_PINGROUP_ULPI_DATA1,
TEGRA_PINGROUP_ULPI_DATA2,
TEGRA_PINGROUP_ULPI_DATA3,
TEGRA_PINGROUP_ULPI_DATA4,
TEGRA_PINGROUP_ULPI_DATA5,
TEGRA_PINGROUP_ULPI_DATA6,
TEGRA_PINGROUP_ULPI_DATA7,
TEGRA_PINGROUP_ULPI_CLK,
TEGRA_PINGROUP_ULPI_DIR,
TEGRA_PINGROUP_ULPI_NXT,
TEGRA_PINGROUP_ULPI_STP,
TEGRA_PINGROUP_DAP3_FS,
TEGRA_PINGROUP_DAP3_DIN,
TEGRA_PINGROUP_DAP3_DOUT,
TEGRA_PINGROUP_DAP3_SCLK,
TEGRA_PINGROUP_GPIO_PV0,
TEGRA_PINGROUP_GPIO_PV1,
TEGRA_PINGROUP_SDMMC1_CLK,
TEGRA_PINGROUP_SDMMC1_CMD,
TEGRA_PINGROUP_SDMMC1_DAT3,
TEGRA_PINGROUP_SDMMC1_DAT2,
TEGRA_PINGROUP_SDMMC1_DAT1,
TEGRA_PINGROUP_SDMMC1_DAT0,
TEGRA_PINGROUP_GPIO_PV2,
TEGRA_PINGROUP_GPIO_PV3,
TEGRA_PINGROUP_CLK2_OUT,
TEGRA_PINGROUP_CLK2_REQ,
TEGRA_PINGROUP_LCD_PWR1,
TEGRA_PINGROUP_LCD_PWR2,
TEGRA_PINGROUP_LCD_SDIN,
TEGRA_PINGROUP_LCD_SDOUT,
TEGRA_PINGROUP_LCD_WR_N,
TEGRA_PINGROUP_LCD_CS0_N,
TEGRA_PINGROUP_LCD_DC0,
TEGRA_PINGROUP_LCD_SCK,
TEGRA_PINGROUP_LCD_PWR0,
TEGRA_PINGROUP_LCD_PCLK,
TEGRA_PINGROUP_LCD_DE,
TEGRA_PINGROUP_LCD_HSYNC,
TEGRA_PINGROUP_LCD_VSYNC,
TEGRA_PINGROUP_LCD_D0,
TEGRA_PINGROUP_LCD_D1,
TEGRA_PINGROUP_LCD_D2,
TEGRA_PINGROUP_LCD_D3,
TEGRA_PINGROUP_LCD_D4,
TEGRA_PINGROUP_LCD_D5,
TEGRA_PINGROUP_LCD_D6,
TEGRA_PINGROUP_LCD_D7,
TEGRA_PINGROUP_LCD_D8,
TEGRA_PINGROUP_LCD_D9,
TEGRA_PINGROUP_LCD_D10,
TEGRA_PINGROUP_LCD_D11,
TEGRA_PINGROUP_LCD_D12,
TEGRA_PINGROUP_LCD_D13,
TEGRA_PINGROUP_LCD_D14,
TEGRA_PINGROUP_LCD_D15,
TEGRA_PINGROUP_LCD_D16,
TEGRA_PINGROUP_LCD_D17,
TEGRA_PINGROUP_LCD_D18,
TEGRA_PINGROUP_LCD_D19,
TEGRA_PINGROUP_LCD_D20,
TEGRA_PINGROUP_LCD_D21,
TEGRA_PINGROUP_LCD_D22,
TEGRA_PINGROUP_LCD_D23,
TEGRA_PINGROUP_LCD_CS1_N,
TEGRA_PINGROUP_LCD_M1,
TEGRA_PINGROUP_LCD_DC1,
TEGRA_PINGROUP_HDMI_INT,
TEGRA_PINGROUP_DDC_SCL,
TEGRA_PINGROUP_DDC_SDA,
TEGRA_PINGROUP_CRT_HSYNC,
TEGRA_PINGROUP_CRT_VSYNC,
TEGRA_PINGROUP_VI_D0,
TEGRA_PINGROUP_VI_D1,
TEGRA_PINGROUP_VI_D2,
TEGRA_PINGROUP_VI_D3,
TEGRA_PINGROUP_VI_D4,
TEGRA_PINGROUP_VI_D5,
TEGRA_PINGROUP_VI_D6,
TEGRA_PINGROUP_VI_D7,
TEGRA_PINGROUP_VI_D8,
TEGRA_PINGROUP_VI_D9,
TEGRA_PINGROUP_VI_D10,
TEGRA_PINGROUP_VI_D11,
TEGRA_PINGROUP_VI_PCLK,
TEGRA_PINGROUP_VI_MCLK,
TEGRA_PINGROUP_VI_VSYNC,
TEGRA_PINGROUP_VI_HSYNC,
TEGRA_PINGROUP_UART2_RXD,
TEGRA_PINGROUP_UART2_TXD,
TEGRA_PINGROUP_UART2_RTS_N,
TEGRA_PINGROUP_UART2_CTS_N,
TEGRA_PINGROUP_UART3_TXD,
TEGRA_PINGROUP_UART3_RXD,
TEGRA_PINGROUP_UART3_CTS_N,
TEGRA_PINGROUP_UART3_RTS_N,
TEGRA_PINGROUP_GPIO_PU0,
TEGRA_PINGROUP_GPIO_PU1,
TEGRA_PINGROUP_GPIO_PU2,
TEGRA_PINGROUP_GPIO_PU3,
TEGRA_PINGROUP_GPIO_PU4,
TEGRA_PINGROUP_GPIO_PU5,
TEGRA_PINGROUP_GPIO_PU6,
TEGRA_PINGROUP_GEN1_I2C_SDA,
TEGRA_PINGROUP_GEN1_I2C_SCL,
TEGRA_PINGROUP_DAP4_FS,
TEGRA_PINGROUP_DAP4_DIN,
TEGRA_PINGROUP_DAP4_DOUT,
TEGRA_PINGROUP_DAP4_SCLK,
TEGRA_PINGROUP_CLK3_OUT,
TEGRA_PINGROUP_CLK3_REQ,
TEGRA_PINGROUP_GMI_WP_N,
TEGRA_PINGROUP_GMI_IORDY,
TEGRA_PINGROUP_GMI_WAIT,
TEGRA_PINGROUP_GMI_ADV_N,
TEGRA_PINGROUP_GMI_CLK,
TEGRA_PINGROUP_GMI_CS0_N,
TEGRA_PINGROUP_GMI_CS1_N,
TEGRA_PINGROUP_GMI_CS2_N,
TEGRA_PINGROUP_GMI_CS3_N,
TEGRA_PINGROUP_GMI_CS4_N,
TEGRA_PINGROUP_GMI_CS6_N,
TEGRA_PINGROUP_GMI_CS7_N,
TEGRA_PINGROUP_GMI_AD0,
TEGRA_PINGROUP_GMI_AD1,
TEGRA_PINGROUP_GMI_AD2,
TEGRA_PINGROUP_GMI_AD3,
TEGRA_PINGROUP_GMI_AD4,
TEGRA_PINGROUP_GMI_AD5,
TEGRA_PINGROUP_GMI_AD6,
TEGRA_PINGROUP_GMI_AD7,
TEGRA_PINGROUP_GMI_AD8,
TEGRA_PINGROUP_GMI_AD9,
TEGRA_PINGROUP_GMI_AD10,
TEGRA_PINGROUP_GMI_AD11,
TEGRA_PINGROUP_GMI_AD12,
TEGRA_PINGROUP_GMI_AD13,
TEGRA_PINGROUP_GMI_AD14,
TEGRA_PINGROUP_GMI_AD15,
TEGRA_PINGROUP_GMI_A16,
TEGRA_PINGROUP_GMI_A17,
TEGRA_PINGROUP_GMI_A18,
TEGRA_PINGROUP_GMI_A19,
TEGRA_PINGROUP_GMI_WR_N,
TEGRA_PINGROUP_GMI_OE_N,
TEGRA_PINGROUP_GMI_DQS,
TEGRA_PINGROUP_GMI_RST_N,
TEGRA_PINGROUP_GEN2_I2C_SCL,
TEGRA_PINGROUP_GEN2_I2C_SDA,
TEGRA_PINGROUP_SDMMC4_CLK,
TEGRA_PINGROUP_SDMMC4_CMD,
TEGRA_PINGROUP_SDMMC4_DAT0,
TEGRA_PINGROUP_SDMMC4_DAT1,
TEGRA_PINGROUP_SDMMC4_DAT2,
TEGRA_PINGROUP_SDMMC4_DAT3,
TEGRA_PINGROUP_SDMMC4_DAT4,
TEGRA_PINGROUP_SDMMC4_DAT5,
TEGRA_PINGROUP_SDMMC4_DAT6,
TEGRA_PINGROUP_SDMMC4_DAT7,
TEGRA_PINGROUP_SDMMC4_RST_N,
TEGRA_PINGROUP_CAM_MCLK,
TEGRA_PINGROUP_GPIO_PCC1,
TEGRA_PINGROUP_GPIO_PBB0,
TEGRA_PINGROUP_CAM_I2C_SCL,
TEGRA_PINGROUP_CAM_I2C_SDA,
TEGRA_PINGROUP_GPIO_PBB3,
TEGRA_PINGROUP_GPIO_PBB4,
TEGRA_PINGROUP_GPIO_PBB5,
TEGRA_PINGROUP_GPIO_PBB6,
TEGRA_PINGROUP_GPIO_PBB7,
TEGRA_PINGROUP_GPIO_PCC2,
TEGRA_PINGROUP_JTAG_RTCK,
TEGRA_PINGROUP_PWR_I2C_SCL,
TEGRA_PINGROUP_PWR_I2C_SDA,
TEGRA_PINGROUP_KB_ROW0,
TEGRA_PINGROUP_KB_ROW1,
TEGRA_PINGROUP_KB_ROW2,
TEGRA_PINGROUP_KB_ROW3,
TEGRA_PINGROUP_KB_ROW4,
TEGRA_PINGROUP_KB_ROW5,
TEGRA_PINGROUP_KB_ROW6,
TEGRA_PINGROUP_KB_ROW7,
TEGRA_PINGROUP_KB_ROW8,
TEGRA_PINGROUP_KB_ROW9,
TEGRA_PINGROUP_KB_ROW10,
TEGRA_PINGROUP_KB_ROW11,
TEGRA_PINGROUP_KB_ROW12,
TEGRA_PINGROUP_KB_ROW13,
TEGRA_PINGROUP_KB_ROW14,
TEGRA_PINGROUP_KB_ROW15,
TEGRA_PINGROUP_KB_COL0,
TEGRA_PINGROUP_KB_COL1,
TEGRA_PINGROUP_KB_COL2,
TEGRA_PINGROUP_KB_COL3,
TEGRA_PINGROUP_KB_COL4,
TEGRA_PINGROUP_KB_COL5,
TEGRA_PINGROUP_KB_COL6,
TEGRA_PINGROUP_KB_COL7,
TEGRA_PINGROUP_CLK_32K_OUT,
TEGRA_PINGROUP_SYS_CLK_REQ,
TEGRA_PINGROUP_CORE_PWR_REQ,
TEGRA_PINGROUP_CPU_PWR_REQ,
TEGRA_PINGROUP_PWR_INT_N,
TEGRA_PINGROUP_CLK_32K_IN,
TEGRA_PINGROUP_OWR,
TEGRA_PINGROUP_DAP1_FS,
TEGRA_PINGROUP_DAP1_DIN,
TEGRA_PINGROUP_DAP1_DOUT,
TEGRA_PINGROUP_DAP1_SCLK,
TEGRA_PINGROUP_CLK1_REQ,
TEGRA_PINGROUP_CLK1_OUT,
TEGRA_PINGROUP_SPDIF_IN,
TEGRA_PINGROUP_SPDIF_OUT,
TEGRA_PINGROUP_DAP2_FS,
TEGRA_PINGROUP_DAP2_DIN,
TEGRA_PINGROUP_DAP2_DOUT,
TEGRA_PINGROUP_DAP2_SCLK,
TEGRA_PINGROUP_SPI2_MOSI,
TEGRA_PINGROUP_SPI2_MISO,
TEGRA_PINGROUP_SPI2_CS0_N,
TEGRA_PINGROUP_SPI2_SCK,
TEGRA_PINGROUP_SPI1_MOSI,
TEGRA_PINGROUP_SPI1_SCK,
TEGRA_PINGROUP_SPI1_CS0_N,
TEGRA_PINGROUP_SPI1_MISO,
TEGRA_PINGROUP_SPI2_CS1_N,
TEGRA_PINGROUP_SPI2_CS2_N,
TEGRA_PINGROUP_SDMMC3_CLK,
TEGRA_PINGROUP_SDMMC3_CMD,
TEGRA_PINGROUP_SDMMC3_DAT0,
TEGRA_PINGROUP_SDMMC3_DAT1,
TEGRA_PINGROUP_SDMMC3_DAT2,
TEGRA_PINGROUP_SDMMC3_DAT3,
TEGRA_PINGROUP_SDMMC3_DAT4,
TEGRA_PINGROUP_SDMMC3_DAT5,
TEGRA_PINGROUP_SDMMC3_DAT6,
TEGRA_PINGROUP_SDMMC3_DAT7,
TEGRA_PINGROUP_PEX_L0_PRSNT_N,
TEGRA_PINGROUP_PEX_L0_RST_N,
TEGRA_PINGROUP_PEX_L0_CLKREQ_N,
TEGRA_PINGROUP_PEX_WAKE_N,
TEGRA_PINGROUP_PEX_L1_PRSNT_N,
TEGRA_PINGROUP_PEX_L1_RST_N,
TEGRA_PINGROUP_PEX_L1_CLKREQ_N,
TEGRA_PINGROUP_PEX_L2_PRSNT_N,
TEGRA_PINGROUP_PEX_L2_RST_N,
TEGRA_PINGROUP_PEX_L2_CLKREQ_N,
TEGRA_PINGROUP_HDMI_CEC,
TEGRA_MAX_PINGROUP,
};
enum tegra_drive_pingroup {
TEGRA_DRIVE_PINGROUP_AO1 = 0,
TEGRA_DRIVE_PINGROUP_AO2,
TEGRA_DRIVE_PINGROUP_AT1,
TEGRA_DRIVE_PINGROUP_AT2,
TEGRA_DRIVE_PINGROUP_AT3,
TEGRA_DRIVE_PINGROUP_AT4,
TEGRA_DRIVE_PINGROUP_AT5,
TEGRA_DRIVE_PINGROUP_CDEV1,
TEGRA_DRIVE_PINGROUP_CDEV2,
TEGRA_DRIVE_PINGROUP_CSUS,
TEGRA_DRIVE_PINGROUP_DAP1,
TEGRA_DRIVE_PINGROUP_DAP2,
TEGRA_DRIVE_PINGROUP_DAP3,
TEGRA_DRIVE_PINGROUP_DAP4,
TEGRA_DRIVE_PINGROUP_DBG,
TEGRA_DRIVE_PINGROUP_LCD1,
TEGRA_DRIVE_PINGROUP_LCD2,
TEGRA_DRIVE_PINGROUP_SDIO2,
TEGRA_DRIVE_PINGROUP_SDIO3,
TEGRA_DRIVE_PINGROUP_SPI,
TEGRA_DRIVE_PINGROUP_UAA,
TEGRA_DRIVE_PINGROUP_UAB,
TEGRA_DRIVE_PINGROUP_UART2,
TEGRA_DRIVE_PINGROUP_UART3,
TEGRA_DRIVE_PINGROUP_VI1,
TEGRA_DRIVE_PINGROUP_SDIO1,
TEGRA_DRIVE_PINGROUP_CRT,
TEGRA_DRIVE_PINGROUP_DDC,
TEGRA_DRIVE_PINGROUP_GMA,
TEGRA_DRIVE_PINGROUP_GMB,
TEGRA_DRIVE_PINGROUP_GMC,
TEGRA_DRIVE_PINGROUP_GMD,
TEGRA_DRIVE_PINGROUP_GME,
TEGRA_DRIVE_PINGROUP_GMF,
TEGRA_DRIVE_PINGROUP_GMG,
TEGRA_DRIVE_PINGROUP_GMH,
TEGRA_DRIVE_PINGROUP_OWR,
TEGRA_DRIVE_PINGROUP_UAD,
TEGRA_DRIVE_PINGROUP_GPV,
TEGRA_DRIVE_PINGROUP_DEV3,
TEGRA_DRIVE_PINGROUP_CEC,
TEGRA_MAX_DRIVE_PINGROUP,
};
#endif
arch/arm/mach-tegra/include/mach/pinmux.h deleted 100644 → 0
View file @ f7269a82
/*
* linux/arch/arm/mach-tegra/include/mach/pinmux.h
*
* Copyright (C) 2010 Google, Inc.
* Copyright (C) 2010,2011 Nvidia, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __MACH_TEGRA_PINMUX_H
#define __MACH_TEGRA_PINMUX_H
enum tegra_mux_func {
TEGRA_MUX_RSVD = 0x8000,
TEGRA_MUX_RSVD1 = 0x8000,
TEGRA_MUX_RSVD2 = 0x8001,
TEGRA_MUX_RSVD3 = 0x8002,
TEGRA_MUX_RSVD4 = 0x8003,
TEGRA_MUX_INVALID = 0x4000,
TEGRA_MUX_NONE = -1,
TEGRA_MUX_AHB_CLK,
TEGRA_MUX_APB_CLK,
TEGRA_MUX_AUDIO_SYNC,
TEGRA_MUX_CRT,
TEGRA_MUX_DAP1,
TEGRA_MUX_DAP2,
TEGRA_MUX_DAP3,
TEGRA_MUX_DAP4,
TEGRA_MUX_DAP5,
TEGRA_MUX_DISPLAYA,
TEGRA_MUX_DISPLAYB,
TEGRA_MUX_EMC_TEST0_DLL,
TEGRA_MUX_EMC_TEST1_DLL,
TEGRA_MUX_GMI,
TEGRA_MUX_GMI_INT,
TEGRA_MUX_HDMI,
TEGRA_MUX_I2C,
TEGRA_MUX_I2C2,
TEGRA_MUX_I2C3,
TEGRA_MUX_IDE,
TEGRA_MUX_IRDA,
TEGRA_MUX_KBC,
TEGRA_MUX_MIO,
TEGRA_MUX_MIPI_HS,
TEGRA_MUX_NAND,
TEGRA_MUX_OSC,
TEGRA_MUX_OWR,
TEGRA_MUX_PCIE,
TEGRA_MUX_PLLA_OUT,
TEGRA_MUX_PLLC_OUT1,
TEGRA_MUX_PLLM_OUT1,
TEGRA_MUX_PLLP_OUT2,
TEGRA_MUX_PLLP_OUT3,
TEGRA_MUX_PLLP_OUT4,
TEGRA_MUX_PWM,
TEGRA_MUX_PWR_INTR,
TEGRA_MUX_PWR_ON,
TEGRA_MUX_RTCK,
TEGRA_MUX_SDIO1,
TEGRA_MUX_SDIO2,
TEGRA_MUX_SDIO3,
TEGRA_MUX_SDIO4,
TEGRA_MUX_SFLASH,
TEGRA_MUX_SPDIF,
TEGRA_MUX_SPI1,
TEGRA_MUX_SPI2,
TEGRA_MUX_SPI2_ALT,
TEGRA_MUX_SPI3,
TEGRA_MUX_SPI4,
TEGRA_MUX_TRACE,
TEGRA_MUX_TWC,
TEGRA_MUX_UARTA,
TEGRA_MUX_UARTB,
TEGRA_MUX_UARTC,
TEGRA_MUX_UARTD,
TEGRA_MUX_UARTE,
TEGRA_MUX_ULPI,
TEGRA_MUX_VI,
TEGRA_MUX_VI_SENSOR_CLK,
TEGRA_MUX_XIO,
TEGRA_MUX_BLINK,
TEGRA_MUX_CEC,
TEGRA_MUX_CLK12,
TEGRA_MUX_DAP,
TEGRA_MUX_DAPSDMMC2,
TEGRA_MUX_DDR,
TEGRA_MUX_DEV3,
TEGRA_MUX_DTV,
TEGRA_MUX_VI_ALT1,
TEGRA_MUX_VI_ALT2,
TEGRA_MUX_VI_ALT3,
TEGRA_MUX_EMC_DLL,
TEGRA_MUX_EXTPERIPH1,
TEGRA_MUX_EXTPERIPH2,
TEGRA_MUX_EXTPERIPH3,
TEGRA_MUX_GMI_ALT,
TEGRA_MUX_HDA,
TEGRA_MUX_HSI,
TEGRA_MUX_I2C4,
TEGRA_MUX_I2C5,
TEGRA_MUX_I2CPWR,
TEGRA_MUX_I2S0,
TEGRA_MUX_I2S1,
TEGRA_MUX_I2S2,
TEGRA_MUX_I2S3,
TEGRA_MUX_I2S4,
TEGRA_MUX_NAND_ALT,
TEGRA_MUX_POPSDIO4,
TEGRA_MUX_POPSDMMC4,
TEGRA_MUX_PWM0,
TEGRA_MUX_PWM1,
TEGRA_MUX_PWM2,
TEGRA_MUX_PWM3,
TEGRA_MUX_SATA,
TEGRA_MUX_SPI5,
TEGRA_MUX_SPI6,
TEGRA_MUX_SYSCLK,
TEGRA_MUX_VGP1,
TEGRA_MUX_VGP2,
TEGRA_MUX_VGP3,
TEGRA_MUX_VGP4,
TEGRA_MUX_VGP5,
TEGRA_MUX_VGP6,
TEGRA_MUX_SAFE,
TEGRA_MAX_MUX,
};
enum tegra_pullupdown {
TEGRA_PUPD_NORMAL = 0,
TEGRA_PUPD_PULL_DOWN,
TEGRA_PUPD_PULL_UP,
};
enum tegra_tristate {
TEGRA_TRI_NORMAL = 0,
TEGRA_TRI_TRISTATE = 1,
};
enum tegra_pin_io {
TEGRA_PIN_OUTPUT = 0,
TEGRA_PIN_INPUT = 1,
};
enum tegra_vddio {
TEGRA_VDDIO_BB = 0,
TEGRA_VDDIO_LCD,
TEGRA_VDDIO_VI,
TEGRA_VDDIO_UART,
TEGRA_VDDIO_DDR,
TEGRA_VDDIO_NAND,
TEGRA_VDDIO_SYS,
TEGRA_VDDIO_AUDIO,
TEGRA_VDDIO_SD,
TEGRA_VDDIO_CAM,
TEGRA_VDDIO_GMI,
TEGRA_VDDIO_PEXCTL,
TEGRA_VDDIO_SDMMC1,
TEGRA_VDDIO_SDMMC3,
TEGRA_VDDIO_SDMMC4,
};
struct tegra_pingroup_config {
int pingroup;
enum tegra_mux_func func;
enum tegra_pullupdown pupd;
enum tegra_tristate tristate;
};
enum tegra_slew {
TEGRA_SLEW_FASTEST = 0,
TEGRA_SLEW_FAST,
TEGRA_SLEW_SLOW,
TEGRA_SLEW_SLOWEST,
TEGRA_MAX_SLEW,
};
enum tegra_pull_strength {
TEGRA_PULL_0 = 0,
TEGRA_PULL_1,
TEGRA_PULL_2,
TEGRA_PULL_3,
TEGRA_PULL_4,
TEGRA_PULL_5,
TEGRA_PULL_6,
TEGRA_PULL_7,
TEGRA_PULL_8,
TEGRA_PULL_9,
TEGRA_PULL_10,
TEGRA_PULL_11,
TEGRA_PULL_12,
TEGRA_PULL_13,
TEGRA_PULL_14,
TEGRA_PULL_15,
TEGRA_PULL_16,
TEGRA_PULL_17,
TEGRA_PULL_18,
TEGRA_PULL_19,
TEGRA_PULL_20,
TEGRA_PULL_21,
TEGRA_PULL_22,
TEGRA_PULL_23,
TEGRA_PULL_24,
TEGRA_PULL_25,
TEGRA_PULL_26,
TEGRA_PULL_27,
TEGRA_PULL_28,
TEGRA_PULL_29,
TEGRA_PULL_30,
TEGRA_PULL_31,
TEGRA_MAX_PULL,
};
enum tegra_drive {
TEGRA_DRIVE_DIV_8 = 0,
TEGRA_DRIVE_DIV_4,
TEGRA_DRIVE_DIV_2,
TEGRA_DRIVE_DIV_1,
TEGRA_MAX_DRIVE,
};
enum tegra_hsm {
TEGRA_HSM_DISABLE = 0,
TEGRA_HSM_ENABLE,
};
enum tegra_schmitt {
TEGRA_SCHMITT_DISABLE = 0,
TEGRA_SCHMITT_ENABLE,
};
struct tegra_drive_pingroup_config {
int pingroup;
enum tegra_hsm hsm;
enum tegra_schmitt schmitt;
enum tegra_drive drive;
enum tegra_pull_strength pull_down;
enum tegra_pull_strength pull_up;
enum tegra_slew slew_rising;
enum tegra_slew slew_falling;
};
struct tegra_drive_pingroup_desc {
const char *name;
s16 reg_bank;
s16 reg;
};
struct tegra_pingroup_desc {
const char *name;
int funcs[4];
int func_safe;
int vddio;
enum tegra_pin_io io_default;
s16 tri_bank; /* Register bank the tri_reg exists within */
s16 mux_bank; /* Register bank the mux_reg exists within */
s16 pupd_bank; /* Register bank the pupd_reg exists within */
s16 tri_reg; /* offset into the TRISTATE_REG_* register bank */
s16 mux_reg; /* offset into the PIN_MUX_CTL_* register bank */
s16 pupd_reg; /* offset into the PULL_UPDOWN_REG_* register bank */
s8 tri_bit; /* offset into the TRISTATE_REG_* register bit */
s8 mux_bit; /* offset into the PIN_MUX_CTL_* register bit */
s8 pupd_bit; /* offset into the PULL_UPDOWN_REG_* register bit */
s8 lock_bit; /* offset of the LOCK bit into mux register bit */
s8 od_bit; /* offset of the OD bit into mux register bit */
s8 ioreset_bit; /* offset of the IO_RESET bit into mux register bit */
};
typedef void (*pinmux_init) (const struct tegra_pingroup_desc **pg,
int *pg_max, const struct tegra_drive_pingroup_desc **pgdrive,
int *pgdrive_max);
void tegra20_pinmux_init(const struct tegra_pingroup_desc **pg, int *pg_max,
const struct tegra_drive_pingroup_desc **pgdrive, int *pgdrive_max);
void tegra30_pinmux_init(const struct tegra_pingroup_desc **pg, int *pg_max,
const struct tegra_drive_pingroup_desc **pgdrive, int *pgdrive_max);
int tegra_pinmux_set_tristate(int pg, enum tegra_tristate tristate);
int tegra_pinmux_set_pullupdown(int pg, enum tegra_pullupdown pupd);
void tegra_pinmux_config_table(const struct tegra_pingroup_config *config,
int len);
void tegra_drive_pinmux_config_table(struct tegra_drive_pingroup_config *config,
int len);
void tegra_pinmux_set_safe_pinmux_table(const struct tegra_pingroup_config *config,
int len);
void tegra_pinmux_config_pinmux_table(const struct tegra_pingroup_config *config,
int len);
void tegra_pinmux_config_tristate_table(const struct tegra_pingroup_config *config,
int len, enum tegra_tristate tristate);
void tegra_pinmux_config_pullupdown_table(const struct tegra_pingroup_config *config,
int len, enum tegra_pullupdown pupd);
#endif
arch/arm/mach-tegra/include/mach/usb_phy.h
View file @ bd69e273
......@@ -61,8 +61,8 @@ struct tegra_usb_phy {
struct usb_phy *ulpi;
};
struct tegra_usb_phy *tegra_usb_phy_open(int instance, void __iomem *regs,
void *config, enum tegra_usb_phy_mode phy_mode);
struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance,
void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode);
int tegra_usb_phy_power_on(struct tegra_usb_phy *phy);
......
arch/arm/mach-tegra/pinmux-tegra20-tables.c deleted 100644 → 0
View file @ f7269a82
This diff is collapsed.
arch/arm/mach-tegra/pinmux-tegra30-tables.c deleted 100644 → 0
View file @ f7269a82
This diff is collapsed.
arch/arm/mach-tegra/pinmux.c deleted 100644 → 0
View file @ f7269a82
This diff is collapsed.
arch/arm/mach-tegra/tegra2_clocks.c
View file @ bd69e273
......@@ -1486,6 +1486,10 @@ static struct clk tegra_clk_m = {
};
static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
{ 12000000, 600000000, 600, 12, 1, 8 },
{ 13000000, 600000000, 600, 13, 1, 8 },
{ 19200000, 600000000, 500, 16, 1, 6 },
{ 26000000, 600000000, 600, 26, 1, 8 },
{ 0, 0, 0, 0, 0, 0 },
};
......
arch/arm/mach-tegra/usb_phy.c
View file @ bd69e273
This diff is collapsed.
drivers/gpio/gpio-tegra.c
View file @ bd69e273
This diff is collapsed.
drivers/mmc/host/sdhci-tegra.c
View file @ bd69e273
This diff is collapsed.
drivers/of/base.c
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/Kconfig
View file @ bd69e273
......@@ -4,7 +4,6 @@
config PINCTRL
bool
depends on EXPERIMENTAL
if PINCTRL
......
drivers/pinctrl/Makefile
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/core.c
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/core.h
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/devicetree.c 0 → 100644
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/devicetree.h 0 → 100644
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/pinconf.c
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/pinconf.h
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/pinctrl-coh901.c
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/pinctrl-pxa3xx.c
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/pinctrl-sirf.c
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/pinctrl-tegra.c
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/pinctrl-tegra.h
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/pinctrl-tegra20.c
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/pinctrl-tegra30.c
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/pinctrl-u300.c
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/pinmux.c
View file @ bd69e273
This diff is collapsed.
drivers/pinctrl/pinmux.h
View file @ bd69e273
This diff is collapsed.
drivers/usb/host/ehci-tegra.c
View file @ bd69e273
This diff is collapsed.
include/linux/of.h
View file @ bd69e273
This diff is collapsed.
include/linux/pinctrl/consumer.h
View file @ bd69e273
This diff is collapsed.
include/linux/pinctrl/pinconf.h
View file @ bd69e273
This diff is collapsed.
include/linux/pinctrl/pinctrl.h
View file @ bd69e273
This diff is collapsed.
include/linux/pinctrl/pinmux.h
View file @ bd69e273
This diff is collapsed.
include/linux/platform_data/tegra_usb.h
View file @ bd69e273
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7