Merge tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev

Pull fbdev fixes from Helge Deller:
 "Two bug fixes for the pxa3xx and intelfb drivers:

   - pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write

   - intelfb: Initialize value of stolen size

  The other changes are small cleanups, simplifications and
  documentation updates to the cirrusfb, skeletonfb, omapfb,
  intelfb, au1100fb and simplefb drivers"

* tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  video: fbdev: omap: Remove duplicate 'the' in comment
  video: fbdev: omapfb: Align '*' in comment
  video: fbdev: simplefb: Check before clk_put() not needed
  video: fbdev: au1100fb: Drop unnecessary NULL ptr check
  video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write
  video: fbdev: skeletonfb: Convert to generic power management
  video: fbdev: cirrusfb: Remove useless reference to PCI power management
  video: fbdev: intelfb: Initialize value of stolen size
  video: fbdev: intelfb: Use aperture size from pci_resource_len
  video: fbdev: skeletonfb: Fix syntax errors in comments

drivers/video/fbdev/au1100fb.c

@@ -560,7 +560,6 @@ int au1100fb_drv_suspend(struct platform_device *dev, pm_message_t state)
 	/* Blank the LCD */
 	au1100fb_fb_blank(VESA_POWERDOWN, &fbdev->info);
 
-	if (fbdev->lcdclk)
 	clk_disable(fbdev->lcdclk);
 
 	memcpy(&fbregs, fbdev->regs, sizeof(struct au1100fb_regs));
@@ -577,7 +576,6 @@ int au1100fb_drv_resume(struct platform_device *dev)
 
 	memcpy(fbdev->regs, &fbregs, sizeof(struct au1100fb_regs));
 
-	if (fbdev->lcdclk)
 	clk_enable(fbdev->lcdclk);
 
 	/* Unblank the LCD */

drivers/video/fbdev/cirrusfb.c

@@ -2184,12 +2184,6 @@ static struct pci_driver cirrusfb_pci_driver = {
 	.id_table	= cirrusfb_pci_table,
 	.probe		= cirrusfb_pci_register,
 	.remove		= cirrusfb_pci_unregister,
-#ifdef CONFIG_PM
-#if 0
-	.suspend	= cirrusfb_pci_suspend,
-	.resume		= cirrusfb_pci_resume,
-#endif
-#endif
 };
 #endif /* CONFIG_PCI */
 

drivers/video/fbdev/intelfb/intelfbdrv.c

@@ -472,7 +472,7 @@ static int intelfb_pci_register(struct pci_dev *pdev,
 	struct fb_info *info;
 	struct intelfb_info *dinfo;
 	int i, err, dvo;
-	int aperture_size, stolen_size;
+	int aperture_size, stolen_size = 0;
 	struct agp_kern_info gtt_info;
 	int agp_memtype;
 	const char *s;
@@ -571,7 +571,7 @@ static int intelfb_pci_register(struct pci_dev *pdev,
 		return -ENODEV;
 	}
 
-	if (intelfbhw_get_memory(pdev, &aperture_size,&stolen_size)) {
+	if (intelfbhw_get_memory(pdev, &aperture_size, &stolen_size)) {
 		cleanup(dinfo);
 		return -ENODEV;
 	}

drivers/video/fbdev/intelfb/intelfbhw.c

@@ -201,13 +201,11 @@ int intelfbhw_get_memory(struct pci_dev *pdev, int *aperture_size,
 	case PCI_DEVICE_ID_INTEL_945GME:
 	case PCI_DEVICE_ID_INTEL_965G:
 	case PCI_DEVICE_ID_INTEL_965GM:
-		/* 915, 945 and 965 chipsets support a 256MB aperture.
-		   Aperture size is determined by inspected the
-		   base address of the aperture. */
-		if (pci_resource_start(pdev, 2) & 0x08000000)
-			*aperture_size = MB(128);
-		else
-			*aperture_size = MB(256);
+		/*
+		 * 915, 945 and 965 chipsets support 64MB, 128MB or 256MB
+		 * aperture. Determine size from PCI resource length.
+		 */
+		*aperture_size = pci_resource_len(pdev, 2);
 		break;
 	default:
 		if ((tmp & INTEL_GMCH_MEM_MASK) == INTEL_GMCH_MEM_64M)

drivers/video/fbdev/omap/sossi.c

@@ -359,7 +359,7 @@ static void sossi_set_bits_per_cycle(int bpc)
 	int bus_pick_count, bus_pick_width;
 
 	/*
-	 * We set explicitly the the bus_pick_count as well, although
+	 * We set explicitly the bus_pick_count as well, although
 	 * with remapping/reordering disabled it will be calculated by HW
 	 * as (32 / bus_pick_width).
 	 */

drivers/video/fbdev/pxa3xx-gcu.c

@@ -381,7 +381,7 @@ pxa3xx_gcu_write(struct file *file, const char *buff,
 	struct pxa3xx_gcu_batch	*buffer;
 	struct pxa3xx_gcu_priv *priv = to_pxa3xx_gcu_priv(file);
 
-	int words = count / 4;
+	size_t words = count / 4;
 
 	/* Does not need to be atomic. There's a lock in user space,
 	 * but anyhow, this is just for statistics. */

drivers/video/fbdev/simplefb.c

@@ -237,7 +237,6 @@ static int simplefb_clocks_get(struct simplefb_par *par,
 		if (IS_ERR(clock)) {
 			if (PTR_ERR(clock) == -EPROBE_DEFER) {
 				while (--i >= 0) {
-					if (par->clks[i])
 					clk_put(par->clks[i]);
 				}
 				kfree(par->clks);

drivers/video/fbdev/skeletonfb.c

@@ -96,7 +96,7 @@ static const struct fb_fix_screeninfo xxxfb_fix = {
 
     /*
      * 	Modern graphical hardware not only supports pipelines but some 
-     *  also support multiple monitors where each display can have its  
+     *  also support multiple monitors where each display can have
      *  its own unique data. In this case each display could be  
      *  represented by a separate framebuffer device thus a separate 
      *  struct fb_info. Now the struct xxx_par represents the graphics
@@ -838,9 +838,9 @@ static void xxxfb_remove(struct pci_dev *dev)
  *
  *      See Documentation/driver-api/pm/devices.rst for more information
  */
-static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg)
+static int xxxfb_suspend(struct device *dev)
 {
-	struct fb_info *info = pci_get_drvdata(dev);
+	struct fb_info *info = dev_get_drvdata(dev);
 	struct xxxfb_par *par = info->par;
 
 	/* suspend here */
@@ -853,9 +853,9 @@ static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg)
  *
  *      See Documentation/driver-api/pm/devices.rst for more information
  */
-static int xxxfb_resume(struct pci_dev *dev)
+static int xxxfb_resume(struct device *dev)
 {
-	struct fb_info *info = pci_get_drvdata(dev);
+	struct fb_info *info = dev_get_drvdata(dev);
 	struct xxxfb_par *par = info->par;
 
 	/* resume here */
@@ -873,14 +873,15 @@ static const struct pci_device_id xxxfb_id_table[] = {
 	{ 0, }
 };
 
+static SIMPLE_DEV_PM_OPS(xxxfb_pm_ops, xxxfb_suspend, xxxfb_resume);
+
 /* For PCI drivers */
 static struct pci_driver xxxfb_driver = {
 	.name =		"xxxfb",
 	.id_table =	xxxfb_id_table,
 	.probe =	xxxfb_probe,
 	.remove =	xxxfb_remove,
-	.suspend =      xxxfb_suspend, /* optional but recommended */
-	.resume =       xxxfb_resume,  /* optional but recommended */
+	.driver.pm =	xxxfb_pm_ops, /* optional but recommended */
 };
 
 MODULE_DEVICE_TABLE(pci, xxxfb_id_table);