Manual merge

Makefile

@@ -124,10 +124,10 @@ DRIVERS-y += drivers/base/base.o \
 	drivers/misc/misc.o \
 	drivers/net/net.o \
 	drivers/media/media.o
-DRIVERS-$(CONFIG_NUBUS) += drivers/nubus/nubus.a
+DRIVERS-$(CONFIG_NUBUS) += drivers/nubus/built-in.o
 DRIVERS-$(CONFIG_ATM) += drivers/atm/atm.o
 DRIVERS-$(CONFIG_IDE) += drivers/ide/idedriver.o
-DRIVERS-$(CONFIG_FC4) += drivers/fc4/fc4.a
+DRIVERS-$(CONFIG_FC4) += drivers/fc4/built-in.o
 DRIVERS-$(CONFIG_SCSI) += drivers/scsi/scsidrv.o
 DRIVERS-$(CONFIG_FUSION) += drivers/message/message.o
 DRIVERS-$(CONFIG_IEEE1394) += drivers/ieee1394/ieee1394drv.o
@@ -139,16 +139,16 @@ endif
 DRIVERS-$(CONFIG_SOUND) += sound/sound.o
 DRIVERS-$(CONFIG_MTD) += drivers/mtd/mtdlink.o
 DRIVERS-$(CONFIG_PCMCIA) += drivers/pcmcia/pcmcia.o
-DRIVERS-$(CONFIG_DIO) += drivers/dio/dio.a
+DRIVERS-$(CONFIG_DIO) += drivers/dio/built-in.o
 DRIVERS-$(CONFIG_SBUS) += drivers/sbus/sbus_all.o
 DRIVERS-$(CONFIG_ZORRO) += drivers/zorro/driver.o
 DRIVERS-$(CONFIG_ALL_PPC) += drivers/macintosh/macintosh.o
 DRIVERS-$(CONFIG_MAC) += drivers/macintosh/macintosh.o
 DRIVERS-$(CONFIG_PNP) += drivers/pnp/pnp.o
-DRIVERS-$(CONFIG_SGI_IP22) += drivers/sgi/sgi.a
+DRIVERS-$(CONFIG_SGI_IP22) += drivers/sgi/built-in.o
 DRIVERS-$(CONFIG_VT) += drivers/video/video.o
-DRIVERS-$(CONFIG_PARIDE) += drivers/block/paride/paride.a
-DRIVERS-$(CONFIG_TC) += drivers/tc/tc.a
+DRIVERS-$(CONFIG_PARIDE) += drivers/block/paride/built-in.o
+DRIVERS-$(CONFIG_TC) += drivers/tc/built-in.o
 DRIVERS-$(CONFIG_USB) += drivers/usb/usbdrv.o
 DRIVERS-$(CONFIG_INPUT) += drivers/input/inputdrv.o
 DRIVERS-$(CONFIG_GAMEPORT) += drivers/input/gameport/gamedrv.o

Rules.make

@@ -144,14 +144,25 @@ cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
 %.o: %.S dummy
 	$(call if_changed,cmd_as_o_S)
 
-# ---------------------------------------------------------------------------
+# FIXME
 
 %.lst: %.c
 	$(CC) $(c_flags) -g -c -o $*.o $<
 	$(TOPDIR)/scripts/makelst $* $(TOPDIR) $(OBJDUMP)
-#
-#
-#
+
+
+# If a Makefile does define neither O_TARGET nor L_TARGET,
+# use a standard O_TARGET named "built-in.o"
+
+ifndef O_TARGET
+ifndef L_TARGET
+O_TARGET := built-in.o
+endif
+endif
+
+# Build the compiled-in targets
+# ---------------------------------------------------------------------------
+
 all_targets: $(O_TARGET) $(L_TARGET) sub_dirs
 
 # To build objects in subdirs, we need to descend into the directories

arch/alpha/math-emu/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the FPU instruction emulation.
 #
 
-O_TARGET := built-in.o
-
 obj-$(CONFIG_MATHEMU) += math-emu.o
 
 math-emu-objs	:= math.o qrnnd.o

drivers/acorn/net/Makefile

@@ -3,13 +3,6 @@
 # Makefile for the Acorn ethercard network device drivers
 #
 
-O_TARGET := built-in.o
-
-obj-y	:=
-obj-m	:=
-obj-n	:=
-obj-	:=
-
 obj-$(CONFIG_ARM_ETHERH)	+= etherh.o
 obj-$(CONFIG_ARM_ETHER3)	+= ether3.o
 obj-$(CONFIG_ARM_ETHER1)	+= ether1.o

drivers/acorn/scsi/Makefile

@@ -2,13 +2,6 @@
 # Makefile for drivers/acorn/scsi
 #
 
-O_TARGET	:= acorn-scsi.o
-
-obj-y		:=
-obj-m		:=
-obj-n		:=
-obj-		:=
-
 export-objs		:= fas216.o queue.o msgqueue.o
 acornscsi_mod-objs	:= acornscsi.o acornscsi-io.o
 

drivers/acpi/Makefile

@@ -21,35 +21,29 @@ obj-y		:= acpi_ksyms.o
 #
 # ACPI Boot-Time Table Parsing
 #
-ifeq ($(CONFIG_ACPI_BOOT),y)
-  obj-y		+= acpi_tables.o
-endif
+obj-$(CONFIG_ACPI_BOOT)		+= acpi_tables.o
 
 #
 # ACPI Core Subsystem (Interpreter)
 #
-ifeq ($(CONFIG_ACPI_INTERPRETER),y)
-  obj-y		+= acpi_osl.o acpi_utils.o
-  subdir-y	+= dispatcher events executer hardware namespace parser \
-		   resources tables utilities
-  obj-y 	+= $(foreach dir,$(subdir-y),$(dir)/$(dir).o)
-endif
+obj-$(CONFIG_ACPI_INTERPRETER)	+= acpi_osl.o acpi_utils.o \
+				   dispatcher/ events/ executer/ hardware/ \
+				   namespace/ parser/ resources/ tables/ \
+				   utilities/
 
 #
 # ACPI Bus and Device Drivers
 #
-ifeq ($(CONFIG_ACPI_BUS),y)
-  obj-y				+= acpi_bus.o 
-  obj-$(CONFIG_ACPI_AC) 	+= acpi_ac.o
-  obj-$(CONFIG_ACPI_BATTERY)	+= acpi_battery.o
-  obj-$(CONFIG_ACPI_BUTTON)	+= acpi_button.o
-  obj-$(CONFIG_ACPI_EC)		+= acpi_ec.o
-  obj-$(CONFIG_ACPI_FAN)	+= acpi_fan.o
-  obj-$(CONFIG_ACPI_PCI)	+= acpi_pci_root.o acpi_pci_link.o
-  obj-$(CONFIG_ACPI_POWER)	+= acpi_power.o
-  obj-$(CONFIG_ACPI_PROCESSOR)	+= acpi_processor.o
-  obj-$(CONFIG_ACPI_THERMAL)	+= acpi_thermal.o
-  obj-$(CONFIG_ACPI_SYSTEM)	+= acpi_system.o
-endif
+obj-$(CONFIG_ACPI_BUS)		+= acpi_bus.o 
+obj-$(CONFIG_ACPI_AC) 		+= acpi_ac.o
+obj-$(CONFIG_ACPI_BATTERY)	+= acpi_battery.o
+obj-$(CONFIG_ACPI_BUTTON)	+= acpi_button.o
+obj-$(CONFIG_ACPI_EC)		+= acpi_ec.o
+obj-$(CONFIG_ACPI_FAN)		+= acpi_fan.o
+obj-$(CONFIG_ACPI_PCI)		+= acpi_pci_root.o acpi_pci_link.o
+obj-$(CONFIG_ACPI_POWER)	+= acpi_power.o
+obj-$(CONFIG_ACPI_PROCESSOR)	+= acpi_processor.o
+obj-$(CONFIG_ACPI_THERMAL)	+= acpi_thermal.o
+obj-$(CONFIG_ACPI_SYSTEM)	+= acpi_system.o
 
 include $(TOPDIR)/Rules.make

drivers/acpi/debugger/Makefile

@@ -2,8 +2,6 @@
 # Makefile for all Linux ACPI interpreter subdirectories
 #
 
-O_TARGET := $(notdir $(CURDIR)).o
-
 obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
 
 EXTRA_CFLAGS += $(ACPI_CFLAGS)

drivers/acpi/dispatcher/Makefile

@@ -2,8 +2,6 @@
 # Makefile for all Linux ACPI interpreter subdirectories
 #
 
-O_TARGET := $(notdir $(CURDIR)).o
-
 obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
 
 EXTRA_CFLAGS += $(ACPI_CFLAGS)

drivers/acpi/events/Makefile

@@ -2,8 +2,6 @@
 # Makefile for all Linux ACPI interpreter subdirectories
 #
 
-O_TARGET := $(notdir $(CURDIR)).o
-
 obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
 
 EXTRA_CFLAGS += $(ACPI_CFLAGS)

drivers/acpi/executer/Makefile

@@ -2,8 +2,6 @@
 # Makefile for all Linux ACPI interpreter subdirectories
 #
 
-O_TARGET := $(notdir $(CURDIR)).o
-
 obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
 
 EXTRA_CFLAGS += $(ACPI_CFLAGS)

drivers/acpi/hardware/Makefile

@@ -2,8 +2,6 @@
 # Makefile for all Linux ACPI interpreter subdirectories
 #
 
-O_TARGET := $(notdir $(CURDIR)).o
-
 obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
 
 EXTRA_CFLAGS += $(ACPI_CFLAGS)

drivers/acpi/namespace/Makefile

@@ -2,8 +2,6 @@
 # Makefile for all Linux ACPI interpreter subdirectories
 #
 
-O_TARGET := $(notdir $(CURDIR)).o
-
 obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
 
 EXTRA_CFLAGS += $(ACPI_CFLAGS)

drivers/acpi/parser/Makefile

@@ -2,8 +2,6 @@
 # Makefile for all Linux ACPI interpreter subdirectories
 #
 
-O_TARGET := $(notdir $(CURDIR)).o
-
 obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
 
 EXTRA_CFLAGS += $(ACPI_CFLAGS)

drivers/acpi/resources/Makefile

@@ -2,8 +2,6 @@
 # Makefile for all Linux ACPI interpreter subdirectories
 #
 
-O_TARGET := $(notdir $(CURDIR)).o
-
 obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
 
 EXTRA_CFLAGS += $(ACPI_CFLAGS)

drivers/acpi/tables/Makefile

@@ -2,8 +2,6 @@
 # Makefile for all Linux ACPI interpreter subdirectories
 #
 
-O_TARGET := $(notdir $(CURDIR)).o
-
 obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
 
 EXTRA_CFLAGS += $(ACPI_CFLAGS)

drivers/acpi/utilities/Makefile

@@ -2,8 +2,6 @@
 # Makefile for all Linux ACPI interpreter subdirectories
 #
 
-O_TARGET := $(notdir $(CURDIR)).o
-
 obj-$(CONFIG_ACPI_INTERPRETER) := $(patsubst %.c,%.o,$(wildcard *.c))
 
 EXTRA_CFLAGS += $(ACPI_CFLAGS)

drivers/block/paride/Makefile

@@ -5,8 +5,6 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-L_TARGET := paride.a
-
 export-objs := paride.o bpck6.o
 
 obj-$(CONFIG_PARIDE)		+= paride.o

drivers/char/Makefile

@@ -182,14 +182,8 @@ obj-$(CONFIG_TOSHIBA) += toshiba.o
 obj-$(CONFIG_I8K) += i8k.o
 obj-$(CONFIG_DS1620) += ds1620.o
 obj-$(CONFIG_INTEL_RNG) += i810_rng.o
-
 obj-$(CONFIG_QIC02_TAPE) += tpqic02.o
-
-subdir-$(CONFIG_FTAPE) += ftape
-ifeq ($(CONFIG_FTAPE),y)
-  obj-y       += ftape/ftape.o
-endif
-
+obj-$(CONFIG_FTAPE) += ftape/
 obj-$(CONFIG_H8) += h8.o
 obj-$(CONFIG_PPDEV) += ppdev.o
 obj-$(CONFIG_DZ) += dz.o
@@ -216,23 +210,10 @@ obj-$(CONFIG_MACHZ_WDT) += machzwd.o
 obj-$(CONFIG_SH_WDT) += shwdt.o
 obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
 obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
-
 obj-$(CONFIG_MWAVE) += mwave/
-
-subdir-$(CONFIG_AGP) += agp
-ifeq ($(CONFIG_AGP),y)
-  obj-y += agp/agp.o
-endif
-
-subdir-$(CONFIG_DRM) += drm
-ifeq ($(CONFIG_DRM),y)
-  obj-y += drm/drm.o
-endif
-
-subdir-$(CONFIG_PCMCIA) += pcmcia
-ifeq ($(CONFIG_PCMCIA),y)
-  obj-y += pcmcia/pcmcia_char.o
-endif
+obj-$(CONFIG_AGP) += agp/
+obj-$(CONFIG_DRM) += drm/
+obj-$(CONFIG_PCMCIA) += pcmcia/
 
 include $(TOPDIR)/Rules.make
 

drivers/char/agp/Makefile

@@ -3,8 +3,6 @@
 # space ioctl interface to use agp memory.  It also adds a kernel interface
 # that other drivers could use to manipulate agp memory.
 
-O_TARGET	:= agp.o
-
 export-objs := agpgart_be.o
 
 agpgart-objs := agpgart_fe.o agpgart_be.o

drivers/char/drm/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the drm device driver.  This driver provides support for the
 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
 
-O_TARGET	:= drm.o
-
 gamma-objs  := gamma_drv.o gamma_dma.o
 tdfx-objs   := tdfx_drv.o
 r128-objs   := r128_drv.o r128_cce.o r128_state.o

drivers/char/ftape/Makefile

@@ -23,8 +23,6 @@
 #      Linux.
 #
 
-O_TARGET := ftape.o
-
 obj-$(CONFIG_FTAPE)		+= lowlevel/
 obj-$(CONFIG_ZFTAPE)		+= zftape/
 obj-$(CONFIG_ZFT_COMPRESSOR)	+= compressor/

drivers/char/ftape/compressor/Makefile

@@ -24,8 +24,6 @@
 #      Linux.
 #
 
-O_TARGET := built-in.o
-
 obj-$(CONFIG_ZFT_COMPRESSOR) += zft-compressor.o
 
 zft-compressor-objs := zftape-compress.o lzrw3.o

drivers/char/ftape/lowlevel/Makefile

@@ -23,8 +23,6 @@
 #      driver for Linux.
 #
 
-O_TARGET := built-in.o
-
 export-objs := ftape_syms.o
 
 obj-$(CONFIG_FTAPE) += ftape.o

drivers/char/ftape/zftape/Makefile

@@ -27,8 +27,6 @@
 # ZFT_OBSOLETE - enable the MTIOC_ZFTAPE_GETBLKSZ ioctl. You should
 #                leave this enabled for compatibility with taper.
 
-O_TARGET := built-in.o
-
 export-objs := zftape_syms.o
 
 obj-$(CONFIG_ZFTAPE) += zftape.o

drivers/char/mwave/Makefile

@@ -4,8 +4,6 @@
 # See the README file in this directory for more info. <paulsch@us.ibm.com>
 #
 
-O_TARGET := built-in.o
-
 obj-$(CONFIG_MWAVE) += mwave.o
 
 mwave-objs := mwavedd.o smapi.o tp3780i.o 3780i.o

drivers/char/pcmcia/Makefile

@@ -4,8 +4,6 @@
 # Makefile for the Linux PCMCIA char device drivers.
 #
 
-O_TARGET := pcmcia_char.o
-
 obj-$(CONFIG_PCMCIA_SERIAL_CS)	+= serial_cs.o
 obj-$(CONFIG_SYNCLINK_CS) += synclink_cs.o
 

drivers/char/rio/Makefile

@@ -6,8 +6,6 @@
 # This file is GPL. See other files for the full Blurb. I'm lazy today. 
 #
 
-O_TARGET := built-in.o
-
 obj-$(CONFIG_RIO) += rio.o
 
 rio-objs := rio_linux.o rioinit.o rioboot.o riocmd.o rioctrl.o riointr.o \

drivers/dio/Makefile

 #
 # Makefile for the linux kernel.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
-#
-# NB: cribbed from the drivers/sbus/Makefile -- PMM
-
-SUB_DIRS     :=
-MOD_SUB_DIRS := $(SUB_DIRS)
-ALL_SUB_DIRS := $(SUB_DIRS)
 
-L_OBJS   := dio.o
-L_TARGET := dio.a
+obj-y := dio.o
 
 include $(TOPDIR)/Rules.make

drivers/fc4/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux Fibre Channel device drivers.
 #
 
-L_TARGET := fc4.a
-
 export-objs := fc_syms.o
 
 fc4-objs := fc.o fc_syms.o

drivers/input/Makefile

@@ -19,11 +19,7 @@ obj-$(CONFIG_INPUT_MOUSEDEV)	+= mousedev.o
 obj-$(CONFIG_INPUT_JOYDEV)	+= joydev.o
 obj-$(CONFIG_INPUT_EVDEV)	+= evdev.o
 
-subdir-$(CONFIG_INPUT_JOYSTICK)	+= joystick
-
-ifeq ($(CONFIG_INPUT_JOYSTICK),y)
-	obj-y += joystick/joydrv.o
-endif
+obj-$(CONFIG_INPUT_JOYSTICK)	+= joystick/
 
 # The global Rules.make.
 

drivers/input/joystick/Makefile

@@ -2,10 +2,6 @@
 # Makefile for the input core drivers.
 #
 
-# The target object and module list name.
-
-O_TARGET	:= joydrv.o
-
 # I-Force may need both USB and RS-232
 
 CONFIG_JOYSTICK_IFORCE := n

drivers/isdn/act2000/Makefile

 # Makefile for the act2000 ISDN device driver
 
-# The target object and module list name.
+# Each configuration option enables a list of files.
 
-O_TARGET	:= built-in.o
+obj-$(CONFIG_ISDN_DRV_ACT2000)	+= act2000.o
 
 # Multipart objects.
 
 act2000-objs	:= module.o capi.o act2000_isa.o
 
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_ISDN_DRV_ACT2000)	+= act2000.o
-
 include $(TOPDIR)/Rules.make

drivers/isdn/capi/Makefile

 # Makefile for the CAPI subsystem.
 
-# The target object and module list name.
-
-O_TARGET	:= built-in.o
-
 # Objects that export symbols.
 
 export-objs	:= kcapi.o capiutil.o capilib.o capifs.o
 
-# Multipart objects.
-
-kernelcapi-objs	:= kcapi.o capiutil.o capilib.o
-
 # Ordering constraints: kernelcapi.o first
 
 # Each configuration option enables a list of files.
@@ -21,6 +13,10 @@ obj-$(CONFIG_ISDN_CAPI_CAPI20)		+= capi.o
 obj-$(CONFIG_ISDN_CAPI_CAPIDRV)		+= capidrv.o
 obj-$(CONFIG_ISDN_CAPI_CAPIFS)		+= capifs.o
 
+# Multipart objects.
+
+kernelcapi-objs	:= kcapi.o capiutil.o capilib.o
+
 # The global Rules.make.
 
 include $(TOPDIR)/Rules.make

drivers/isdn/divert/Makefile

-#
 # Makefile for the dss1_divert ISDN module
-#
 
-# The target object and module list name.
+# Each configuration option enables a list of files.
 
-O_TARGET	:= built-in.o
+obj-$(CONFIG_ISDN_DIVERSION)	+= dss1_divert.o
 
 # Multipart objects.
 
 dss1_divert-objs	:= isdn_divert.o divert_procfs.o divert_init.o
 
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_ISDN_DIVERSION)	+= dss1_divert.o
-
 include $(TOPDIR)/Rules.make
 
 

drivers/isdn/eicon/Makefile

 # Makefile for the eicon ISDN device driver
 
-# The target object and module list name.
-
-O_TARGET	:= built-in.o
-
 # Objects that export symbols.
 
 export-objs	:= Divas_mod.o eicon_mod.o
 
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_ISDN_DRV_EICON_OLD)    	+= eicon.o
+obj-$(CONFIG_ISDN_DRV_EICON_DIVAS)	+= divas.o
+
 # Multipart objects.
 
 eicon-objs	:= eicon_mod.o eicon_isa.o eicon_pci.o eicon_idi.o \
@@ -23,9 +24,4 @@ eicon-objs-$(CONFIG_ISDN_DRV_EICON_PCI) += common.o idi.o bri.o pri.o log.o \
 
 eicon-objs 	+= $(eicon-objs-y)
 
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_ISDN_DRV_EICON_OLD)    	+= eicon.o
-obj-$(CONFIG_ISDN_DRV_EICON_DIVAS)	+= divas.o
-
 include $(TOPDIR)/Rules.make

drivers/isdn/hardware/Makefile

 # Makefile for the CAPI hardware drivers
 
-# The target object and module list name.
-
-O_TARGET	:= built-in.o
-
 # Object files in subdirectories
 
 mod-subdirs			:= avm

drivers/isdn/hardware/avm/Makefile

 # Makefile for the AVM ISDN device drivers
 
-# The target object and module list name.
-
-O_TARGET	:= built-in.o
-
 # Objects that export symbols.
 
 export-objs	:= b1dma.o b1pcmcia.o b1.o

drivers/isdn/hisax/Makefile

 # Makefile for the hisax ISDN device driver
 
-# The target object and module list name.
-
-O_TARGET	  := built-in.o
-
 # Define maximum number of cards
 
 EXTRA_CFLAGS      += -DHISAX_MAX_CARDS=$(CONFIG_HISAX_MAX_CARDS)
@@ -12,12 +8,22 @@ EXTRA_CFLAGS      += -DHISAX_MAX_CARDS=$(CONFIG_HISAX_MAX_CARDS)
 
 export-objs	  := config.o fsm.o hisax_isac.o hisax_hscx.o
 
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_ISDN_DRV_HISAX)		+= hisax.o
+obj-$(CONFIG_HISAX_SEDLBAUER_CS)	+= sedlbauer_cs.o
+obj-$(CONFIG_HISAX_ELSA_CS)		+= elsa_cs.o
+obj-$(CONFIG_HISAX_ST5481)		+= hisax_st5481.o
+obj-$(CONFIG_HISAX_FRITZ_PCIPNP)        += hisax_isac.o hisax_fcpcipnp.o
+obj-$(CONFIG_HISAX_FRITZ_CLASSIC)       += hisax_isac.o hisax_hscx.o hisax_fcclassic.o
+obj-$(CONFIG_HISAX_FRITZ_PCIPNP)        += hisax_hfcpci.o
+
 # Multipart objects.
 
-hisax-objs	  := config.o isdnl1.o tei.o isdnl2.o isdnl3.o \
-		     lmgr.o q931.o callc.o fsm.o cert.o
 hisax_st5481-objs := st5481_init.o st5481_usb.o st5481_d.o st5481_b.o \
 		     st5481_hdlc.o
+hisax-objs	  := config.o isdnl1.o tei.o isdnl2.o isdnl3.o \
+		     lmgr.o q931.o callc.o fsm.o cert.o
 
 # Optional parts of multipart objects.
 hisax-objs-$(CONFIG_HISAX_EURO) += l3dss1.o
@@ -55,16 +61,6 @@ hisax-objs-$(CONFIG_HISAX_W6692) += w6692.o
 
 hisax-objs += $(hisax-objs-y)
 
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_ISDN_DRV_HISAX)		+= hisax.o
-obj-$(CONFIG_HISAX_SEDLBAUER_CS)	+= sedlbauer_cs.o
-obj-$(CONFIG_HISAX_ELSA_CS)		+= elsa_cs.o
-obj-$(CONFIG_HISAX_ST5481)		+= hisax_st5481.o
-obj-$(CONFIG_HISAX_FRITZ_PCIPNP)        += hisax_isac.o hisax_fcpcipnp.o
-obj-$(CONFIG_HISAX_FRITZ_CLASSIC)       += hisax_isac.o hisax_hscx.o hisax_fcclassic.o
-obj-$(CONFIG_HISAX_FRITZ_PCIPNP)        += hisax_hfcpci.o
-
 CERT := $(shell md5sum -c md5sums.asc >> /dev/null;echo $$?)
 CFLAGS_cert.o := -DCERTIFICATION=$(CERT)
 

drivers/isdn/hysdn/Makefile

 # Makefile for the hysdn ISDN device driver
 
-# The target object and module list name.
+# Each configuration option enables a list of files.
 
-O_TARGET	:= built-in.o
+obj-$(CONFIG_HYSDN)	+= hysdn.o
 
 # Multipart objects.
 
@@ -15,8 +15,4 @@ hysdn-objs-$(CONFIG_HYSDN_CAPI) += hycapi.o
 
 hysdn-objs 	+= $(hysdn-objs-y)
 
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_HYSDN)	+= hysdn.o
-
 include $(TOPDIR)/Rules.make

drivers/isdn/i4l/Makefile

 # Makefile for the kernel ISDN subsystem and device drivers.
 
-# The target object and module list name.
-
-O_TARGET	:= built-in.o
-
 # Objects that export symbols.
 
 export-objs	:= isdn_common.o
 
+# Each configuration option enables a list of files.
+
+obj-$(CONFIG_ISDN)			+= isdn.o
+obj-$(CONFIG_ISDN_PPP_BSDCOMP)		+= isdn_bsdcomp.o
+
 # Multipart objects.
 
-isdn-objs	:= isdn_net.o isdn_tty.o isdn_v110.o isdn_common.o
+isdn-objs				:= isdn_net.o isdn_tty.o \
+					   isdn_v110.o isdn_common.o
 
 # Optional parts of multipart objects.
 
@@ -21,11 +23,4 @@ isdn-objs-$(CONFIG_ISDN_TTY_FAX)	+= isdn_ttyfax.o
 
 isdn-objs				+= $(isdn-objs-y)
 
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_ISDN)			+= isdn.o
-obj-$(CONFIG_ISDN_PPP_BSDCOMP)		+= isdn_bsdcomp.o
-
-# The global Rules.make.
-
 include $(TOPDIR)/Rules.make

drivers/isdn/icn/Makefile

 # Makefile for the icn ISDN device driver
 
-# The target object and module list name.
-
-O_TARGET	:= built-in.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_ISDN_DRV_ICN)	+= icn.o

drivers/isdn/isdnloop/Makefile

@@ -2,10 +2,6 @@
 # Makefile for the isdnloop ISDN device driver
 #
 
-# The target object and module list name.
-
-O_TARGET	:= built-in.o
-
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_ISDN_DRV_LOOP)	+= isdnloop.o

drivers/isdn/pcbit/Makefile

 # Makefile for the pcbit ISDN device driver
 
-# The target object and module list name.
+# Each configuration option enables a list of files.
 
-O_TARGET	:= built-in.o
+obj-$(CONFIG_ISDN_DRV_PCBIT)	+= pcbit.o
 
 # Multipart objects.
 
 pcbit-objs	:= module.o edss1.o drv.o layer2.o capi.o callbacks.o
 
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_ISDN_DRV_PCBIT)	+= pcbit.o
-
 include $(TOPDIR)/Rules.make

drivers/isdn/sc/Makefile

 # Makefile for the sc ISDN device driver
 
-# The target object and module list name.
+# Each configuration option enables a list of files.
 
-O_TARGET	:= built-in.o
+obj-$(CONFIG_ISDN_DRV_SC)	+= sc.o
 
 # Multipart objects.
 
 sc-objs		:= shmem.o init.o debug.o packet.o command.o event.o \
 		   ioctl.o interrupt.o message.o timer.o	
 
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_ISDN_DRV_SC)	+= sc.o
-
 include $(TOPDIR)/Rules.make

drivers/isdn/tpam/Makefile

 # Makefile for the TurboPAM ISDN device driver
 
-# The target object and module list name.
+# Each configuration option enables a list of files.
 
-O_TARGET	:= built-in.o
+obj-$(CONFIG_ISDN_DRV_TPAM)	+= tpam.o
 
 # Multipart objects.
 
-tpam-objs	:= tpam_main.o tpam_nco.o tpam_memory.o tpam_commands.o tpam_queues.o tpam_hdlc.o tpam_crcpc.o
-
-# Each configuration option enables a list of files.
-
-obj-$(CONFIG_ISDN_DRV_TPAM)	+= tpam.o
+tpam-objs	:= tpam_main.o tpam_nco.o tpam_memory.o tpam_commands.o \
+		   tpam_queues.o tpam_hdlc.o tpam_crcpc.o
 
 include $(TOPDIR)/Rules.make

drivers/message/Makefile

@@ -6,15 +6,8 @@ O_TARGET := message.o
 
 mod-subdirs := i2o fusion 
 
-subdir-$(CONFIG_I2O)		+= i2o
-ifeq ($(CONFIG_I2O),y)
-  obj-y += i2o/i2o.o
-endif
-
-subdir-$(CONFIG_FUSION)		+= fusion
-ifeq ($(CONFIG_FUSION),y)
-  obj-y += fusion/fusion.o
-endif
+obj-$(CONFIG_I2O)	+= i2o/
+obj-$(CONFIG_FUSION)	+= fusion/
 
 include $(TOPDIR)/Rules.make
 

drivers/message/fusion/Makefile

@@ -43,8 +43,6 @@ EXTRA_CFLAGS += -I. ${MPT_CFLAGS}
 
 #=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-} LSI_LOGIC
 
-O_TARGET := fusion.o
-
 export-objs	:= mptbase.o mptscsih.o mptlan.o mptctl.o isense.o
 
 obj-$(CONFIG_FUSION)		+= mptbase.o mptscsih.o

drivers/message/i2o/Makefile

@@ -5,8 +5,6 @@
 # In the future, some of these should be built conditionally.
 #
 
-O_TARGET := i2o.o
-
 export-objs	:= i2o_pci.o i2o_core.o i2o_config.o i2o_block.o i2o_lan.o i2o_scsi.o i2o_proc.o
 
 obj-$(CONFIG_I2O_PCI)	+= i2o_pci.o

drivers/net/appletalk/Makefile

 #
 # Makefile for drivers/net/appletalk
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-
-O_TARGET := built-in.o
 
-obj-y   :=
-obj-n   :=
-obj-m   :=
-obj-    :=
 export-objs :=
 
 obj-$(CONFIG_IPDDP) += ipddp.o

drivers/net/arcnet/Makefile

 # Makefile for linux/drivers/net/arcnet
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-
-O_TARGET := built-in.o
 
-obj-y	:=
-obj-n	:=
-obj-m	:=
-obj-	:=
 export-objs := arcnet.o com20020.o
 
 obj-$(CONFIG_ARCNET) += arcnet.o

drivers/net/e100/Makefile

 #
 # Makefile for the Intel's E100 ethernet driver
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
-
-O_TARGET := built-in.o
 
 obj-$(CONFIG_E100) += e100.o
 

drivers/net/e1000/Makefile

 #
 # Makefile for the Intel(R) PRO/1000 ethernet driver
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
-
-O_TARGET := built-in.o
 
 obj-$(CONFIG_E1000) += e1000.o
 

drivers/net/fc/Makefile

@@ -5,8 +5,6 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-O_TARGET := built-in.o
-
 obj-$(CONFIG_IPHASE5526)	+= iph5526.o
 
 include $(TOPDIR)/Rules.make

drivers/net/hamradio/Makefile

@@ -10,12 +10,8 @@
 #		Christoph Hellwig <hch@infradead.org>
 #
 
-
-O_TARGET := built-in.o
-
 export-objs	= hdlcdrv.o
 
-
 obj-$(CONFIG_DMASCC)		+= dmascc.o
 obj-$(CONFIG_SCC)		+= scc.o
 obj-$(CONFIG_MKISS)		+= mkiss.o

drivers/net/hamradio/soundmodem/Makefile

 #
 # Makefile for the soundmodem device driver.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now inherited from the
-# parent makes..
-#
-
-O_TARGET	:= built-in.o
 
 obj-$(CONFIG_SOUNDMODEM) += soundmodem.o
 
@@ -25,19 +16,19 @@ soundmodem-$(CONFIG_SOUNDMODEM_PSK4800)		+= sm_psk4800.o
 soundmodem-$(CONFIG_SOUNDMODEM_FSK9600)		+= sm_fsk9600.o
 soundmodem-objs					:= $(soundmodem-y)
 
-all:		all_targets
-.PHONY:		all
+include $(TOPDIR)/Rules.make
 
-gentbl:		gentbl.c
-		$(HOSTCC) $(HOSTCFLAGS) $< -o $@ -lm
+# Dependencies on generates files need to be listed explicitly
+
+sm_%.o: sm_tbl_%.h
 
-TBLHDR		:= sm_tbl_afsk1200.h sm_tbl_afsk2400_8.h 
-TBLHDR		+= sm_tbl_afsk2666.h sm_tbl_psk4800.h
-TBLHDR		+= sm_tbl_hapn4800.h sm_tbl_fsk9600.h
+TBLHDR		:= sm_tbl_afsk1200.h sm_tbl_afsk2400_7.h sm_tbl_afsk2400_8.h \
+		   sm_tbl_afsk2666.h sm_tbl_psk4800.h	 sm_tbl_hapn4800.h \
+		   sm_tbl_fsk9600.h
 
 $(TBLHDR):	gentbl
 		./gentbl
 
-fastdep:	$(TBLHDR)
+gentbl:		gentbl.c
+		$(HOSTCC) $(HOSTCFLAGS) $< -o $@ -lm
 
-include $(TOPDIR)/Rules.make

drivers/net/irda/Makefile

-# File: drivers/irda/Makefile
 #
 # Makefile for the Linux IrDA infrared port device drivers.
 #
@@ -6,11 +5,8 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-O_TARGET := built-in.o
-
 export-objs	= irport.o
 
-
 obj-$(CONFIG_IRTTY_SIR)		+= irtty.o
 obj-$(CONFIG_IRPORT_SIR)	+= 		irport.o
 obj-$(CONFIG_USB_IRDA)		+= irda-usb.o

drivers/net/pcmcia/Makefile

 #
-# drivers/net/pcmcia/Makefile
-#
 # Makefile for the Linux PCMCIA network device drivers.
 #
 
-O_TARGET := built-in.o
-
-obj-y		:=
-obj-m		:=
-obj-n		:=
-obj-		:=
-
 # Things that need to export symbols
 export-objs	:= ray_cs.o
 

drivers/net/sk98lin/Makefile

-# File: drivers/sk98lin/Makefile
 #
 # Makefile for the SysKonnect SK-98xx device driver.
 #
 
-O_TARGET := built-in.o
-
 obj-$(CONFIG_SK98LIN) += sk98lin.o
 
 sk98lin-objs := skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \

drivers/net/skfp/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the SysKonnect FDDI PCI adapter driver
 #
 
-O_TARGET := built-in.o
-
 obj-$(CONFIG_SKFP) += skfp.o
 
 skfp-objs :=  skfddi.o    hwmtm.o    fplustm.o  smt.o      cfm.o     \

drivers/net/tokenring/Makefile

 #
 # Makefile for drivers/net/tokenring
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-
-O_TARGET := built-in.o
 
-obj-y   :=
-obj-n   :=
-obj-m   :=
-obj-    :=
 export-objs := tms380tr.o
 
 obj-$(CONFIG_IBMTR) 	+= ibmtr.o

drivers/net/tulip/Makefile

 #
-# drivers/net/tulip/Makefile
-#
 # Makefile for the Linux "Tulip" family network device drivers.
 #
 
-O_TARGET := built-in.o
-
-obj-y		:=
-obj-m		:=
-obj-n		:=
-obj-		:=
-
-# Things that need to export symbols
-export-objs	:=
-
 obj-$(CONFIG_PCMCIA_XIRTULIP)	+= xircom_tulip_cb.o
 obj-$(CONFIG_PCMCIA_XIRCOM)	+= xircom_cb.o
 obj-$(CONFIG_DM9102)		+= dmfe.o

drivers/net/wan/Makefile

@@ -5,8 +5,6 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-O_TARGET := built-in.o
-
 export-objs :=	z85230.o syncppp.o comx.o sdladrv.o cycx_drv.o hdlc_generic.o \
 		dlci.o pc300_drv.o
 

drivers/net/wan/lmc/Makefile

-# File: drivers/lmc/Makefile
 #
 # Makefile for the Lan Media 21140 based WAN cards
 # Specifically the 1000,1200,5200,5245
 #
 
-O_TARGET := built-in.o
-
 obj-$(CONFIG_LANMEDIA) += lmc.o
 
 lmc-objs := lmc_debug.o lmc_media.o lmc_main.o lmc_proto.o

drivers/net/wireless/Makefile

 #
-# drivers/net/wireless/Makefile
-#
 # Makefile for the Linux Wireless network device drivers.
 #
 
-O_TARGET := built-in.o
-
-obj-y		:=
-obj-m		:=
-obj-n		:=
-obj-		:=
-
 # Things that need to export symbols
 export-objs	:= airo.o orinoco.o hermes.o
 

drivers/nubus/Makefile

 #
 # Makefile for the nubus specific drivers.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now inherited from the
-# parent makefile.
-#
-
-L_TARGET := nubus.a
 
 export-objs := nubus_syms.o
 

drivers/scsi/Makefile

@@ -25,10 +25,8 @@ export-objs	:= scsi_syms.o 53c700.o
 mod-subdirs	:= pcmcia ../acorn/scsi
 
 
-subdir-$(CONFIG_SCSI_AIC7XXX)	+= aic7xxx
 subdir-$(CONFIG_PCMCIA)		+= pcmcia
 
-
 obj-$(CONFIG_SCSI)		+= scsi_mod.o
 
 obj-$(CONFIG_A4000T_SCSI)	+= amiga7xx.o	53c7xx.o
@@ -64,9 +62,7 @@ obj-$(CONFIG_SCSI_ULTRASTOR)	+= ultrastor.o
 obj-$(CONFIG_SCSI_AHA152X)	+= aha152x.o
 obj-$(CONFIG_SCSI_AHA1542)	+= aha1542.o
 obj-$(CONFIG_SCSI_AHA1740)	+= aha1740.o
-ifeq ($(CONFIG_SCSI_AIC7XXX),y)
-obj-$(CONFIG_SCSI_AIC7XXX)	+= aic7xxx/aic7xxx_drv.o
-endif
+obj-$(CONFIG_SCSI_AIC7XXX)	+= aic7xxx/
 obj-$(CONFIG_SCSI_AIC7XXX_OLD)	+= aic7xxx_old.o
 obj-$(CONFIG_SCSI_IPS)		+= ips.o
 obj-$(CONFIG_SCSI_FD_MCS)	+= fd_mcs.o
@@ -87,10 +83,7 @@ obj-$(CONFIG_SCSI_T128)		+= t128.o
 obj-$(CONFIG_SCSI_DMX3191D)	+= dmx3191d.o
 obj-$(CONFIG_SCSI_DTC3280)	+= dtc.o
 obj-$(CONFIG_SCSI_NCR53C7xx)	+= 53c7,8xx.o 
-subdir-$(CONFIG_SCSI_SYM53C8XX_2)	+= sym53c8xx_2
-ifeq ($(CONFIG_SCSI_SYM53C8XX_2),y)
-  obj-$(CONFIG_SCSI_SYM53C8XX_2)	+= sym53c8xx_2/sym53c8xx_2.o
-endif
+obj-$(CONFIG_SCSI_SYM53C8XX_2)	+= sym53c8xx_2/
 obj-$(CONFIG_SCSI_SYM53C8XX)	+= sym53c8xx.o 
 obj-$(CONFIG_SCSI_NCR53C8XX)	+= ncr53c8xx.o 
 obj-$(CONFIG_SCSI_EATA_DMA)	+= eata_dma.o
@@ -123,8 +116,7 @@ obj-$(CONFIG_SCSI_FCAL)		+= fcal.o
 obj-$(CONFIG_SCSI_CPQFCTS)	+= cpqfc.o
 obj-$(CONFIG_SCSI_LASI700)	+= lasi700.o 53c700.o
 
-subdir-$(CONFIG_ARCH_ACORN)	+= ../acorn/scsi
-obj-$(CONFIG_ARCH_ACORN)	+= ../acorn/scsi/acorn-scsi.o
+obj-$(CONFIG_ARCH_ACORN)	+= ../acorn/scsi/
 
 obj-$(CONFIG_CHR_DEV_ST)	+= st.o
 obj-$(CONFIG_CHR_DEV_OSST)	+= osst.o

drivers/scsi/aic7xxx/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Linux aic7xxx SCSI driver.
 #
 
-O_TARGET := aic7xxx_drv.o
-
 obj-$(CONFIG_SCSI_AIC7XXX)	+= aic7xxx.o
 
 # Core files

drivers/scsi/sym53c8xx_2/Makefile

 # Makefile for the NCR/SYMBIOS/LSI 53C8XX PCI SCSI controllers driver.
 
-O_TARGET := sym53c8xx_2.o
-
 sym53c8xx-objs := sym_fw.o sym_glue.o sym_hipd.o sym_malloc.o sym_misc.o sym_nvram.o
 obj-$(CONFIG_SCSI_SYM53C8XX_2) := sym53c8xx.o
 

drivers/sgi/Makefile

 #
 # Makefile for the linux kernel.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
-
-L_TARGET := sgi.a
 
 #
 # Character and Audio devices for SGI machines.

drivers/video/aty/Makefile

 
-O_TARGET := built-in.o
-
 export-objs    :=  atyfb_base.o mach64_accel.o
 
 obj-$(CONFIG_FB_ATY) += atyfb.o

drivers/video/matrox/Makefile

@@ -2,8 +2,6 @@
 # 5 Aug 1999, James Simmons, <mailto:jsimmons@edgeglobal.com>
 # Rewritten to use lists instead of if-statements.
 
-O_TARGET := built-in.o
-
 # All of the (potential) objects that export symbols.
 # This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
 

drivers/video/riva/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the Riva framebuffer driver
 #
 
-O_TARGET := built-in.o
-
 obj-$(CONFIG_FB_RIVA) += rivafb.o
 
 rivafb-objs := fbdev.o riva_hw.o accel.o

drivers/video/sis/Makefile

@@ -2,8 +2,6 @@
 # Makefile for the SiS framebuffer device driver
 #
 
-O_TARGET := built-in.o
-
 export-objs := sis_main.o
 
 obj-$(CONFIG_FB_SIS) += sisfb.o

fs/Makefile

@@ -23,55 +23,6 @@ obj-y += nfsctl.o
 endif
 endif
 
-subdir-$(CONFIG_PROC_FS)	+= proc
-subdir-y			+= partitions
-subdir-y			+= driverfs
-
-# Do not add any filesystems before this line
-subdir-$(CONFIG_EXT3_FS)	+= ext3    # Before ext2 so root fs can be ext3
-subdir-$(CONFIG_JBD)		+= jbd
-subdir-$(CONFIG_EXT2_FS)	+= ext2
-subdir-$(CONFIG_CRAMFS)		+= cramfs
-subdir-$(CONFIG_RAMFS)		+= ramfs
-subdir-$(CONFIG_CODA_FS)	+= coda
-subdir-$(CONFIG_INTERMEZZO_FS)	+= intermezzo
-subdir-$(CONFIG_MINIX_FS)	+= minix
-subdir-$(CONFIG_FAT_FS)		+= fat
-subdir-$(CONFIG_UMSDOS_FS)	+= umsdos
-subdir-$(CONFIG_MSDOS_FS)	+= msdos
-subdir-$(CONFIG_VFAT_FS)	+= vfat
-subdir-$(CONFIG_BFS_FS)		+= bfs
-subdir-$(CONFIG_ISO9660_FS)	+= isofs
-subdir-$(CONFIG_DEVFS_FS)	+= devfs
-subdir-$(CONFIG_HFS_FS)		+= hfs
-subdir-$(CONFIG_VXFS_FS)	+= freevxfs
-subdir-$(CONFIG_NFS_FS)		+= nfs
-subdir-$(CONFIG_EXPORTFS)	+= exportfs
-subdir-$(CONFIG_NFSD)		+= nfsd
-subdir-$(CONFIG_LOCKD)		+= lockd
-subdir-$(CONFIG_NLS)		+= nls
-subdir-$(CONFIG_SYSV_FS)	+= sysv
-subdir-$(CONFIG_SMB_FS)		+= smbfs
-subdir-$(CONFIG_NCP_FS)		+= ncpfs
-subdir-$(CONFIG_HPFS_FS)	+= hpfs
-subdir-$(CONFIG_NTFS_FS)	+= ntfs
-subdir-$(CONFIG_UFS_FS)		+= ufs
-subdir-$(CONFIG_EFS_FS)		+= efs
-subdir-$(CONFIG_JFFS_FS)	+= jffs
-subdir-$(CONFIG_JFFS2_FS)	+= jffs2
-subdir-$(CONFIG_AFFS_FS)	+= affs
-subdir-$(CONFIG_ROMFS_FS)	+= romfs
-subdir-$(CONFIG_QNX4FS_FS)	+= qnx4
-subdir-$(CONFIG_UDF_FS)		+= udf
-subdir-$(CONFIG_AUTOFS_FS)	+= autofs
-subdir-$(CONFIG_AUTOFS4_FS)	+= autofs4
-subdir-$(CONFIG_ADFS_FS)	+= adfs
-subdir-$(CONFIG_REISERFS_FS)	+= reiserfs
-subdir-$(CONFIG_DEVPTS_FS)	+= devpts
-subdir-$(CONFIG_SUN_OPENPROMFS)	+= openpromfs
-subdir-$(CONFIG_JFS_FS)		+= jfs
-
-
 obj-$(CONFIG_BINFMT_AOUT)	+= binfmt_aout.o
 obj-$(CONFIG_BINFMT_EM86)	+= binfmt_em86.o
 obj-$(CONFIG_BINFMT_MISC)	+= binfmt_misc.o
@@ -85,8 +36,52 @@ obj-$(CONFIG_QUOTA) += dquot.o
 obj-$(CONFIG_QFMT_V1)		+= quota_v1.o
 obj-$(CONFIG_QFMT_V2)		+= quota_v2.o
 
-# persistent filesystems
-obj-y += $(join $(subdir-y),$(subdir-y:%=/%.o))
+obj-$(CONFIG_PROC_FS)		+= proc/
+obj-y				+= partitions/
+obj-y				+= driverfs/
 
+# Do not add any filesystems before this line
+obj-$(CONFIG_EXT3_FS)		+= ext3/ # Before ext2 so root fs can be ext3
+obj-$(CONFIG_JBD)		+= jbd/
+obj-$(CONFIG_EXT2_FS)		+= ext2/
+obj-$(CONFIG_CRAMFS)		+= cramfs/
+obj-$(CONFIG_RAMFS)		+= ramfs/
+obj-$(CONFIG_CODA_FS)		+= coda/
+obj-$(CONFIG_INTERMEZZO_FS)	+= intermezzo/
+obj-$(CONFIG_MINIX_FS)		+= minix/
+obj-$(CONFIG_FAT_FS)		+= fat/
+obj-$(CONFIG_UMSDOS_FS)		+= umsdos/
+obj-$(CONFIG_MSDOS_FS)		+= msdos/
+obj-$(CONFIG_VFAT_FS)		+= vfat/
+obj-$(CONFIG_BFS_FS)		+= bfs/
+obj-$(CONFIG_ISO9660_FS)	+= isofs/
+obj-$(CONFIG_DEVFS_FS)		+= devfs/
+obj-$(CONFIG_HFS_FS)		+= hfs/
+obj-$(CONFIG_VXFS_FS)		+= freevxfs/
+obj-$(CONFIG_NFS_FS)		+= nfs/
+obj-$(CONFIG_EXPORTFS)		+= exportfs/
+obj-$(CONFIG_NFSD)		+= nfsd/
+obj-$(CONFIG_LOCKD)		+= lockd/
+obj-$(CONFIG_NLS)		+= nls/
+obj-$(CONFIG_SYSV_FS)		+= sysv/
+obj-$(CONFIG_SMB_FS)		+= smbfs/
+obj-$(CONFIG_NCP_FS)		+= ncpfs/
+obj-$(CONFIG_HPFS_FS)		+= hpfs/
+obj-$(CONFIG_NTFS_FS)		+= ntfs/
+obj-$(CONFIG_UFS_FS)		+= ufs/
+obj-$(CONFIG_EFS_FS)		+= efs/
+obj-$(CONFIG_JFFS_FS)		+= jffs/
+obj-$(CONFIG_JFFS2_FS)		+= jffs2/
+obj-$(CONFIG_AFFS_FS)		+= affs/
+obj-$(CONFIG_ROMFS_FS)		+= romfs/
+obj-$(CONFIG_QNX4FS_FS)		+= qnx4/
+obj-$(CONFIG_UDF_FS)		+= udf/
+obj-$(CONFIG_AUTOFS_FS)		+= autofs/
+obj-$(CONFIG_AUTOFS4_FS)	+= autofs4/
+obj-$(CONFIG_ADFS_FS)		+= adfs/
+obj-$(CONFIG_REISERFS_FS)	+= reiserfs/
+obj-$(CONFIG_DEVPTS_FS)		+= devpts/
+obj-$(CONFIG_SUN_OPENPROMFS)	+= openpromfs/
+obj-$(CONFIG_JFS_FS)		+= jfs/
 
 include $(TOPDIR)/Rules.make

fs/adfs/Makefile

 #
 # Makefile for the linux adfs filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
 
-O_TARGET := adfs.o
+obj-$(CONFIG_ADFS_FS) += adfs.o
 
-obj-y    := dir.o dir_f.o dir_fplus.o file.o inode.o map.o super.o
-obj-m    := $(O_TARGET)
+adfs-objs := dir.o dir_f.o dir_fplus.o file.o inode.o map.o super.o
 
 include $(TOPDIR)/Rules.make

fs/affs/Makefile

 #
 # Makefile for the Linux affs filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
 
 #EXTRA_CFLAGS=-DDEBUG=1
 
-O_TARGET := affs.o
+obj-$(CONFIG_AFFS_FS) += affs.o
 
-obj-y   := super.o namei.o inode.o file.o dir.o amigaffs.o bitmap.o symlink.o
-obj-m   := $(O_TARGET)
+affs-objs := super.o namei.o inode.o file.o dir.o amigaffs.o bitmap.o symlink.o
 
 include $(TOPDIR)/Rules.make

fs/autofs/Makefile

 #
 # Makefile for the linux autofs-filesystem routines.
 #
-# We can build this either out of the kernel tree or the autofs tools tree.
-#
 
-O_TARGET := autofs.o
+obj-$(CONFIG_AUTOFS_FS) += autofs.o
 
-obj-y   := dirhash.o init.o inode.o root.o symlink.o waitq.o
-obj-m   := $(O_TARGET)
+autofs-objs := dirhash.o init.o inode.o root.o symlink.o waitq.o
 
 include $(TOPDIR)/Rules.make

fs/autofs4/Makefile

 #
 # Makefile for the linux autofs-filesystem routines.
 #
-# We can build this either out of the kernel tree or the autofs tools tree.
-#
-
-O_TARGET := autofs4.o
 
-obj-y   := init.o inode.o root.o symlink.o waitq.o expire.o
+obj-$(CONFIG_AUTOFS4_FS) += autofs4.o
 
-obj-m   := $(O_TARGET)
+autofs4-objs := init.o inode.o root.o symlink.o waitq.o expire.o
 
 include $(TOPDIR)/Rules.make

fs/bfs/Makefile

 #
 # Makefile for BFS filesystem.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main Makefile...
 
-O_TARGET := bfs.o
+obj-$(CONFIG_BFS_FS) += bfs.o
 
-obj-y   := inode.o file.o dir.o
-obj-m   := $(O_TARGET)
+bfs-objs := inode.o file.o dir.o
 
 include $(TOPDIR)/Rules.make

fs/coda/Makefile

@@ -2,11 +2,10 @@
 # Makefile for the Linux Coda filesystem routines.
 #
 
-O_TARGET := coda.o
+obj-$(CONFIG_CODA_FS) += coda.o
 
-obj-y   := psdev.o cache.o cnode.o inode.o dir.o file.o upcall.o coda_linux.o\
-           symlink.o pioctl.o sysctl.o 
-obj-m   := $(O_TARGET)
+coda-objs := psdev.o cache.o cnode.o inode.o dir.o file.o upcall.o \
+	     coda_linux.o symlink.o pioctl.o sysctl.o 
 
 # If you want debugging output, please uncomment the following line.
 

fs/cramfs/Makefile

@@ -2,10 +2,8 @@
 # Makefile for the linux cramfs routines.
 #
 
-O_TARGET := cramfs.o
+obj-$(CONFIG_CRAMFS) += cramfs.o
 
-obj-y  := inode.o uncompress.o
-
-obj-m := $(O_TARGET)
+cramfs-objs := inode.o uncompress.o
 
 include $(TOPDIR)/Rules.make

fs/devfs/Makefile

 #
 # Makefile for the linux devfs-filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
-
-O_TARGET := devfs.o
 
 export-objs := base.o util.o
 
-obj-y   := base.o util.o
+obj-$(CONFIG_DEVFS_FS) += devfs.o
+
+devfs-objs := base.o util.o
 
 # Special case to support building documentation
 ifndef TOPDIR

fs/devpts/Makefile

@@ -2,10 +2,8 @@
 # Makefile for the Linux /dev/pts virtual filesystem.
 #
 
-O_TARGET := devpts.o
+obj-$(CONFIG_DEVPTS_FS) += devpts.o
 
-obj-y    := root.o inode.o
-
-obj-m    := $(O_TARGET)
+devpts-objs := root.o inode.o
 
 include $(TOPDIR)/Rules.make

fs/driverfs/Makefile

-O_TARGET := driverfs.o
+#
+# Makefile for the driverfs virtual filesystem.
+#
 
 export-objs := inode.o
 
 obj-y := inode.o
-obj-m := $(O_TARGET)
 
 include $(TOPDIR)/Rules.make

fs/efs/Makefile

 #
 # Makefile for the linux efs-filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
 
-O_TARGET := efs.o
+obj-$(CONFIG_EFS_FS) += efs.o
 
-obj-y    := super.o inode.o namei.o dir.o file.o symlink.o
-obj-m    := $(O_TARGET)
+efs-objs := super.o inode.o namei.o dir.o file.o symlink.o
 
 include $(TOPDIR)/Rules.make

fs/exportfs/Makefile

 #
 # Makefile for the filesystem export support routines.
 
-O_TARGET := exportfs.o
-
 export-objs := expfs.o
 
-obj-y :=    expfs.o
-obj-m := $(O_TARGET)
+obj-$(CONFIG_EXPORTFS) += exportfs.o
+
+exportfs-objs := expfs.o
 
 include $(TOPDIR)/Rules.make

fs/ext2/Makefile

 #
 # Makefile for the linux ext2-filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
 
-O_TARGET := ext2.o
+obj-$(CONFIG_EXT2_FS) += ext2.o
 
-obj-y    := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \
+ext2-objs := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \
 	     ioctl.o namei.o super.o symlink.o
-obj-m    := $(O_TARGET)
 
 include $(TOPDIR)/Rules.make

fs/ext3/Makefile

 #
-# Makefile for the linux ext2-filesystem routines.
+# Makefile for the linux ext3-filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
 
-O_TARGET := ext3.o
+obj-$(CONFIG_EXT3_FS) += ext3.o
 
-obj-y    := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \
+ext3-objs    := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \
 		ioctl.o namei.o super.o symlink.o
-obj-m    := $(O_TARGET)
 
 include $(TOPDIR)/Rules.make

fs/fat/Makefile

 #
 # Makefile for the Linux fat filesystem support.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
-
-O_TARGET := fat.o
 
 export-objs := fatfs_syms.o
 
-obj-y    := buffer.o cache.o dir.o file.o inode.o misc.o cvf.o fatfs_syms.o
-obj-m    := $(O_TARGET)
+obj-$(CONFIG_FAT_FS) += fat.o
+
+fat-objs := buffer.o cache.o dir.o file.o inode.o misc.o cvf.o fatfs_syms.o
 
 include $(TOPDIR)/Rules.make

fs/freevxfs/Makefile

@@ -2,10 +2,9 @@
 # VxFS Makefile
 #
 
-O_TARGET :=	freevxfs.o
+obj-$(CONFIG_VXFS_FS) += freevxfs.o
 
-obj-y :=	vxfs_bmap.o vxfs_fshead.o vxfs_immed.o vxfs_inode.o \
+freevxfs-objs := vxfs_bmap.o vxfs_fshead.o vxfs_immed.o vxfs_inode.o \
 		 vxfs_lookup.o vxfs_olt.o vxfs_subr.o vxfs_super.o
-obj-m :=	$(O_TARGET)
 
 include $(TOPDIR)/Rules.make

fs/hfs/Makefile

 #
 # Makefile for the Linux hfs filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
 
-O_TARGET := hfs.o
+obj-$(CONFIG_HFS_FS) += hfs.o
 
-obj-y    := balloc.o bdelete.o bfind.o bins_del.o binsert.o bitmap.o bitops.o \
+hfs-objs := balloc.o bdelete.o bfind.o bins_del.o binsert.o bitmap.o bitops.o \
 	    bnode.o brec.o btree.o catalog.o dir.o dir_cap.o dir_dbl.o \
 	    dir_nat.o extent.o file.o file_cap.o file_hdr.o inode.o mdb.o \
             part_tbl.o string.o super.o sysdep.o trans.o version.o
 
-obj-m    := $(O_TARGET)
-
 include $(TOPDIR)/Rules.make

fs/hpfs/Makefile

-O_TARGET := hpfs.o
+#
+# Makefile for the Linux hpfs filesystem routines.
+#
 
-obj-y := alloc.o anode.o buffer.o dentry.o dir.o dnode.o ea.o file.o inode.o map.o name.o namei.o super.o
-obj-m := $(O_TARGET)
+obj-$(CONFIG_HPFS_FS) += hpfs.o
+
+hpfs-objs := alloc.o anode.o buffer.o dentry.o dir.o dnode.o ea.o file.o \
+	     inode.o map.o name.o namei.o super.o
 
 include $(TOPDIR)/Rules.make

fs/intermezzo/Makefile

@@ -2,11 +2,11 @@
 # Makefile 1.00 Peter Braam <braam@clusterfs.com>
 #
 
-O_TARGET := intermezzo.o
+obj-$(CONFIG_INTERMEZZO_FS) += intermezzo.o
 
-obj-y :=  journal_reiserfs.o cache.o  journal.o presto.o vfs.o psdev.o upcall.o methods.o sysctl.o dcache.o  dir.o  super.o journal_ext2.o journal_ext3.o journal_xfs.o  inode.o  file.o journal_obdfs.o
-
-
-obj-m := $(O_TARGET)
+intermezzo-objs := journal_reiserfs.o cache.o journal.o presto.o vfs.o \
+		   psdev.o upcall.o methods.o sysctl.o dcache.o dir.o \
+		   super.o journal_ext2.o journal_ext3.o journal_xfs.o \
+		   inode.o  file.o journal_obdfs.o
 
 include $(TOPDIR)/Rules.make

fs/isofs/Makefile

 #
 # Makefile for the Linux isofs filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
-
-O_TARGET := isofs.o
 
-obj-y  := namei.o inode.o dir.o util.o rock.o
-obj-$(CONFIG_JOLIET) += joliet.o
-obj-$(CONFIG_ZISOFS) += compress.o
+obj-$(CONFIG_ISO9660_FS) += isofs.o
 
-obj-m  := $(O_TARGET)
+isofs-objs-y 			:= namei.o inode.o dir.o util.o rock.o
+isofs-objs-$(CONFIG_JOLIET)	+= joliet.o
+isofs-objs-$(CONFIG_ZISOFS)	+= compress.o
+isofs-objs			:= $(isofs-objs-y)
 
 include $(TOPDIR)/Rules.make

fs/jbd/Makefile

 #
-# fs/jbd/Makefile
-# 
 # Makefile for the linux journaling routines.
 #
 
 export-objs := journal.o
-O_TARGET := jbd.o
 
-obj-y   := transaction.o commit.o recovery.o checkpoint.o revoke.o journal.o
+obj-$(CONFIG_JBD) += jbd.o
 
-obj-m   := $(O_TARGET)
+jbd-objs := transaction.o commit.o recovery.o checkpoint.o revoke.o journal.o
 
 include $(TOPDIR)/Rules.make
 

fs/jffs/Makefile

@@ -4,21 +4,11 @@
 # $Id: Makefile,v 1.11 2001/09/25 20:59:41 dwmw2 Exp $
 #
 
-obj-y := jffs_fm.o intrep.o
+obj-$(CONFIG_JFFS_FS) += jffs.o
 
-ifeq ($(PATCHLEVEL),2)
-	obj-y += inode-v22.o
-else
-	obj-y += inode-v23.o
-endif
-
-ifeq ($(CONFIG_JFFS_PROC_FS),y)
-	obj-y += jffs_proc.o
-endif
-
-O_TARGET := jffs.o
-
-obj-m := $(O_TARGET)
+jffs-y 				:= jffs_fm.o intrep.o inode-v23.o
+jffs-$(CONFIG_JFFS_PROC_FS)	+= jffs_proc.o
+jffs-objs			:= $(jffs-y)
 
 include $(TOPDIR)/Rules.make
 

fs/jffs2/Makefile

@@ -3,12 +3,8 @@
 #
 # $Id: Makefile,v 1.34 2002/03/08 11:27:59 dwmw2 Exp $
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
 
+obj-$(CONFIG_JFFS2_FS) += jffs2.o
 
 COMPR_OBJS	:= compr.o compr_rubin.o compr_rtime.o compr_zlib.o
 JFFS2_OBJS	:= dir.o file.o ioctl.o nodelist.o malloc.o \
@@ -20,11 +16,8 @@ LINUX_OBJS-25	:= super.o
 
 NAND_OBJS-$(CONFIG_JFFS2_FS_NAND)	:= wbuf.o
 
-O_TARGET := jffs2.o
-
-obj-y := $(COMPR_OBJS) $(JFFS2_OBJS) $(VERS_OBJS) $(NAND_OBJS-y) \
+jffs2-objs := $(COMPR_OBJS) $(JFFS2_OBJS) $(VERS_OBJS) $(NAND_OBJS-y) \
 	      $(LINUX_OBJS-$(VERSION)$(PATCHLEVEL))
-obj-m := $(O_TARGET)
 
 include $(TOPDIR)/Rules.make
 

fs/jfs/Makefile

 #
 # Makefile for the Linux JFS filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
 
-O_TARGET := jfs.o
-obj-y   := super.o file.o inode.o namei.o jfs_mount.o jfs_umount.o \
+obj-$(CONFIG_JFS_FS) += jfs.o
+
+jfs-objs := super.o file.o inode.o namei.o jfs_mount.o jfs_umount.o \
 	    jfs_xtree.o jfs_imap.o jfs_debug.o jfs_dmap.o \
 	    jfs_unicode.o jfs_dtree.o jfs_inode.o \
 	    jfs_extent.o symlink.o jfs_metapage.o \
 	    jfs_logmgr.o jfs_txnmgr.o jfs_uniupr.o
-obj-m   := $(O_TARGET)
 
 EXTRA_CFLAGS += -D_JFS_4K
 

fs/lockd/Makefile

 #
 # Makefile for the linux lock manager stuff
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
-
-O_TARGET := lockd.o
 
 export-objs := lockd_syms.o
 
-obj-y    := clntlock.o clntproc.o host.o svc.o svclock.o svcshare.o \
-	    svcproc.o svcsubs.o mon.o xdr.o lockd_syms.o
+obj-$(CONFIG_LOCKD) += lockd.o
 
-obj-$(CONFIG_LOCKD_V4) += xdr4.o svc4proc.o
-
-obj-m    := $(O_TARGET)
+lockd-objs-y := clntlock.o clntproc.o host.o svc.o svclock.o svcshare.o \
+	        svcproc.o svcsubs.o mon.o xdr.o lockd_syms.o
+lockd-objs-$(CONFIG_LOCKD_V4) += xdr4.o svc4proc.o
+lockd-objs		      := $(lockd-objs-y)
 
 include $(TOPDIR)/Rules.make

fs/minix/Makefile

 #
 # Makefile for the Linux minix filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
 
-O_TARGET := minix.o
+obj-$(CONFIG_MINIX_FS) += minix.o
 
-obj-y    := bitmap.o itree_v1.o itree_v2.o namei.o inode.o file.o dir.o
-obj-m    := $(O_TARGET)
+minix-objs := bitmap.o itree_v1.o itree_v2.o namei.o inode.o file.o dir.o
 
 include $(TOPDIR)/Rules.make

fs/msdos/Makefile

 #
 # Makefile for the Linux msdos filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
-
-O_TARGET := msdos.o
 
 export-objs := msdosfs_syms.o
 
-obj-y := namei.o msdosfs_syms.o
-obj-m := $(O_TARGET)
+obj-$(CONFIG_MSDOS_FS) += msdos.o
+
+msdos-objs := namei.o msdosfs_syms.o
 
 include $(TOPDIR)/Rules.make

fs/ncpfs/Makefile

 #
 # Makefile for the linux ncp filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
 
-O_TARGET := ncpfs.o
+obj-$(CONFIG_NCP_FS) += ncpfs.o
 
-obj-y    := dir.o file.o inode.o ioctl.o mmap.o ncplib_kernel.o sock.o \
+ncpfs-objs   := dir.o file.o inode.o ioctl.o mmap.o ncplib_kernel.o sock.o \
 		symlink.o ncpsign_kernel.o
-obj-m    := $(O_TARGET)
 
 # If you want debugging output, please uncomment the following line
 # EXTRA_CFLAGS += -DDEBUG_NCP=1

fs/nfs/Makefile

 #
 # Makefile for the Linux nfs filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
-
-O_TARGET := nfs.o
-
-obj-y    := dir.o file.o flushd.o inode.o nfs2xdr.o pagelist.o proc.o \
-	    read.o symlink.o unlink.o write.o
 
-obj-$(CONFIG_ROOT_NFS) += nfsroot.o mount_clnt.o      
-obj-$(CONFIG_NFS_V3) += nfs3proc.o nfs3xdr.o
+obj-$(CONFIG_NFS_FS) += nfs.o
 
-obj-m   := $(O_TARGET)
+nfs-y 			:= dir.o file.o flushd.o inode.o nfs2xdr.o pagelist.o \
+			   proc.o read.o symlink.o unlink.o write.o
+nfs-$(CONFIG_ROOT_NFS)	+= nfsroot.o mount_clnt.o      
+nfs-$(CONFIG_NFS_V3)	+= nfs3proc.o nfs3xdr.o
+nfs-objs		:= $(nfs-y)
 
 include $(TOPDIR)/Rules.make

fs/nfsd/Makefile

 #
-# Makefile for the Linux nfs filesystem routines.
+# Makefile for the Linux nfs server
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
-
-O_TARGET := nfsd.o
-
-obj-y :=    nfssvc.o nfsctl.o nfsproc.o nfsfh.o vfs.o \
-	    export.o auth.o lockd.o nfscache.o nfsxdr.o \
-	    stats.o
 
-obj-$(CONFIG_NFSD_V3) += nfs3proc.o nfs3xdr.o
+obj-$(CONFIG_NFSD)	+= nfsd.o
 
-obj-m := $(O_TARGET)
+nfsd-y 			:= nfssvc.o nfsctl.o nfsproc.o nfsfh.o vfs.o \
+			   export.o auth.o lockd.o nfscache.o nfsxdr.o stats.o
+nfsd-$(CONFIG_NFSD_V3)	+= nfs3proc.o nfs3xdr.o
+nfsd-objs		:= $(nfsd-y)
 
 include $(TOPDIR)/Rules.make

fs/nls/Makefile

@@ -2,13 +2,9 @@
 # Makefile for native language support
 #
 
-O_TARGET = nls.o
 export-objs := nls_base.o
 
-obj-y	:=	nls_base.o
-obj-m	:=
-obj-n	:=
-obj-	:=
+obj-$(CONFIG_NLS)		+= nls_base.o
 
 obj-$(CONFIG_NLS_CODEPAGE_437)	+= nls_cp437.o
 obj-$(CONFIG_NLS_CODEPAGE_737)	+= nls_cp737.o
@@ -30,14 +26,8 @@ obj-$(CONFIG_NLS_CODEPAGE_932)	+= nls_cp932.o nls_sjis.o nls_euc-jp.o
 obj-$(CONFIG_NLS_CODEPAGE_936)	+= nls_cp936.o nls_gb2312.o
 obj-$(CONFIG_NLS_CODEPAGE_949)	+= nls_cp949.o nls_euc-kr.o
 obj-$(CONFIG_NLS_CODEPAGE_950)	+= nls_cp950.o nls_big5.o
-obj-$(CONFIG_NLS_CODEPAGE_1250)	+= nls_cp1250.o
 obj-$(CONFIG_NLS_CODEPAGE_1251)	+= nls_cp1251.o
-obj-$(CONFIG_NLS_CODEPAGE_1252)	+= nls_cp1252.o
-obj-$(CONFIG_NLS_CODEPAGE_1253)	+= nls_cp1253.o
-obj-$(CONFIG_NLS_CODEPAGE_1254)	+= nls_cp1254.o
-obj-$(CONFIG_NLS_CODEPAGE_1256)	+= nls_cp1256.o
-obj-$(CONFIG_NLS_CODEPAGE_1257)	+= nls_cp1257.o
-obj-$(CONFIG_NLS_CODEPAGE_1258)	+= nls_cp1258.o
+obj-$(CONFIG_NLS_CODEPAGE_1255)	+= nls_cp1255.o
 obj-$(CONFIG_NLS_ISO8859_1)	+= nls_iso8859-1.o
 obj-$(CONFIG_NLS_ISO8859_2)	+= nls_iso8859-2.o
 obj-$(CONFIG_NLS_ISO8859_3)	+= nls_iso8859-3.o

fs/ntfs/Makefile

 # Rules for making the NTFS driver.
 
-O_TARGET := ntfs.o
+obj-$(CONFIG_NTFS_FS) += ntfs.o
 
-obj-y   := aops.o attrib.o compress.o debug.o dir.o file.o inode.o mft.o \
+ntfs-objs := aops.o attrib.o compress.o debug.o dir.o file.o inode.o mft.o \
 	     mst.o namei.o super.o sysctl.o time.o unistr.o upcase.o
 
-obj-m   := $(O_TARGET)
-
 EXTRA_CFLAGS = -DNTFS_VERSION=\"2.0.7\"
 
 ifeq ($(CONFIG_NTFS_DEBUG),y)

fs/openpromfs/Makefile

 #
-# Makefile for the Linux minix filesystem routines.
+# Makefile for the Linux Sun Openprom filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
 
-O_TARGET := openpromfs.o
+obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs.o
 
-obj-y   := inode.o
-obj-m   := $(O_TARGET)
+openpromfs-objs := inode.o
 
 include $(TOPDIR)/Rules.make

fs/partitions/Makefile

 #
 # Makefile for the linux kernel.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
-
-O_TARGET := partitions.o
 
 export-objs := check.o ibm.o msdos.o
 

fs/proc/Makefile

 #
 # Makefile for the Linux proc filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
-
-O_TARGET := proc.o
 
 export-objs := root.o
 
-obj-y    := inode.o root.o base.o generic.o array.o \
+obj-$(CONFIG_PROC_FS) += proc.o
+
+proc-objs    := inode.o root.o base.o generic.o array.o \
 		kmsg.o proc_tty.o proc_misc.o kcore.o
 
 ifeq ($(CONFIG_PROC_DEVICETREE),y)
-obj-y += proc_devtree.o
+proc-objs    += proc_devtree.o
 endif
 
 include $(TOPDIR)/Rules.make

fs/qnx4/Makefile

 #
 # Makefile for the linux qnx4-filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
 
-O_TARGET := qnx4.o
+obj-$(CONFIG_QNX4FS_FS) += qnx4.o
 
-obj-y   := inode.o dir.o namei.o file.o bitmap.o truncate.o fsync.o
-obj-m   := $(O_TARGET)
+qnx4-objs := inode.o dir.o namei.o file.o bitmap.o truncate.o fsync.o
 
 include $(TOPDIR)/Rules.make

fs/ramfs/Makefile

@@ -2,9 +2,8 @@
 # Makefile for the linux ramfs routines.
 #
 
-O_TARGET := ramfs.o
+obj-$(CONFIG_RAMFS) += ramfs.o
 
-obj-y := inode.o
-obj-m := $(O_TARGET)
+ramfs-objs := inode.o
 
 include $(TOPDIR)/Rules.make

fs/reiserfs/Makefile

 #
 # Makefile for the linux reiser-filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
 
-O_TARGET := reiserfs.o
-obj-y   := bitmap.o do_balan.o namei.o inode.o file.o dir.o fix_node.o super.o prints.o objectid.o \
-lbalance.o ibalance.o stree.o hashes.o buffer2.o tail_conversion.o journal.o resize.o item_ops.o ioctl.o procfs.o
+obj-$(CONFIG_REISERFS_FS) += reiserfs.o
 
-obj-m   := $(O_TARGET)
+reiserfs-objs := bitmap.o do_balan.o namei.o inode.o file.o dir.o fix_node.o \
+		 super.o prints.o objectid.o lbalance.o ibalance.o stree.o \
+		 hashes.o buffer2.o tail_conversion.o journal.o resize.o \
+		 item_ops.o ioctl.o procfs.o
 
 # gcc -O2 (the kernel default)  is overaggressive on ppc32 when many inline
 # functions are used.  This causes the compiler to advance the stack

fs/romfs/Makefile

 #
 # Makefile for the linux romfs filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
 
-O_TARGET := romfs.o
+obj-$(CONFIG_ROMFS_FS) += romfs.o
 
-obj-y  := inode.o
-obj-m  := $(O_TARGET)
+romfs-objs := inode.o
 
 include $(TOPDIR)/Rules.make

fs/smbfs/Makefile

 #
 # Makefile for the linux smb-filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
 
-O_TARGET := smbfs.o
+obj-$(CONFIG_SMB_FS) += smbfs.o
 
-obj-y   := proc.o dir.o cache.o sock.o inode.o file.o ioctl.o getopt.o
-obj-m   := $(O_TARGET)
+smbfs-objs := proc.o dir.o cache.o sock.o inode.o file.o ioctl.o getopt.o
 
 # If you want debugging output, you may add these flags to the EXTRA_CFLAGS
 # SMBFS_PARANOIA should normally be enabled.

fs/sysv/Makefile

 #
 # Makefile for the Linux SystemV/Coherent filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
 
-O_TARGET := sysv.o
+obj-$(CONFIG_SYSV_FS) += sysv.o
 
-obj-y   := ialloc.o balloc.o inode.o itree.o file.o dir.o \
+sysv-objs := ialloc.o balloc.o inode.o itree.o file.o dir.o \
 	     namei.o super.o symlink.o
-obj-m   := $(O_TARGET)
 
 include $(TOPDIR)/Rules.make

fs/udf/Makefile

 #
 # Makefile for the linux udf-filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .o file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile..
 
-O_TARGET := udf.o
+obj-$(CONFIG_UDF_FS) += udf.o
 
-obj-y    := balloc.o dir.o file.o ialloc.o inode.o lowlevel.o namei.o \
+udf-objs     := balloc.o dir.o file.o ialloc.o inode.o lowlevel.o namei.o \
 		partition.o super.o truncate.o symlink.o fsync.o \
 		crc.o directory.o misc.o udftime.o unicode.o
-obj-m    := $(O_TARGET)
 
 include $(TOPDIR)/Rules.make

fs/ufs/Makefile

 #
 # Makefile for the Linux ufs filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile.
 
-O_TARGET := ufs.o
+obj-$(CONFIG_UFS_FS) += ufs.o
 
-obj-y   := balloc.o cylinder.o dir.o file.o ialloc.o inode.o \
+ufs-objs := balloc.o cylinder.o dir.o file.o ialloc.o inode.o \
 	    namei.o super.o symlink.o truncate.o util.o
-obj-m   := $(O_TARGET)
 
 include $(TOPDIR)/Rules.make

fs/umsdos/Makefile

 #
 # Makefile for the umsdos Unix-like filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (not a .c file).
-#
-# Note 2:  the CFLAGS definitions are now in the main makefile.
-O_TARGET := umsdos.o
 
-obj-y   := dir.o  inode.o ioctl.o mangle.o namei.o rdir.o emd.o
+obj-$(CONFIG_UMSDOS) += umsdos.o
 
-obj-m   := $(O_TARGET)
+umsdos-objs := dir.o  inode.o ioctl.o mangle.o namei.o rdir.o emd.o
 
 include $(TOPDIR)/Rules.make
 

fs/vfat/Makefile

 #
 # Makefile for the linux vfat-filesystem routines.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
-
-O_TARGET := vfat.o
 
 export-objs := vfatfs_syms.o
 
-obj-y := namei.o vfatfs_syms.o
-obj-m := $(O_TARGET)
+obj-$(CONFIG_VFAT_FS) += vfat.o
+
+vfat-objs := namei.o vfatfs_syms.o
 
 include $(TOPDIR)/Rules.make

lib/Makefile

@@ -23,11 +23,8 @@ endif
 
 obj-$(CONFIG_CRC32)	+= crc32.o
 
-subdir-$(CONFIG_ZLIB_INFLATE) += zlib_inflate
-subdir-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate
-
-# Include the subdirs, if necessary.
-obj-y += $(join $(subdir-y),$(subdir-y:%=/%.o))
+obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/
+obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
 
 include $(TOPDIR)/drivers/net/Makefile.lib
 include $(TOPDIR)/drivers/usb/class/Makefile.lib

lib/zlib_deflate/Makefile

@@ -6,13 +6,10 @@
 # decompression code.
 #
 
-O_TARGET    := zlib_deflate.o
-
 export-objs := deflate_syms.o
 
-obj-y := deflate.o deftree.o deflate_syms.o
-obj-m := $(O_TARGET)
+obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate.o
 
-EXTRA_CFLAGS += -I $(TOPDIR)/lib/zlib_deflate
+zlib_deflate-objs := deflate.o deftree.o deflate_syms.o
 
 include $(TOPDIR)/Rules.make

lib/zlib_inflate/Makefile

@@ -13,14 +13,11 @@
 # uncompression can be done without blocking on allocation).
 #
 
-O_TARGET    := zlib_inflate.o
-
 export-objs := inflate_syms.o
 
-obj-y := infblock.o infcodes.o inffast.o inflate.o \
-	 inftrees.o infutil.o inflate_syms.o
-obj-m := $(O_TARGET)
+obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate.o
 
-EXTRA_CFLAGS += -I $(TOPDIR)/lib/zlib_inflate
+zlib_inflate-objs := infblock.o infcodes.o inffast.o inflate.o \
+		     inftrees.o infutil.o inflate_syms.o
 
 include $(TOPDIR)/Rules.make

net/802/Makefile

 #
 # Makefile for the Linux 802.x protocol layers.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-O_TARGET := 802.o
 
 export-objs = llc_macinit.o p8022.o psnap.o
 

net/8021q/Makefile

 #
 # Makefile for the Linux VLAN layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
 
-O_TARGET := 8021q.o
+obj-$(CONFIG_VLAN_8021Q) += 8021q.o
 
-obj-y := vlan.o vlanproc.o vlan_dev.o
-obj-m := $(O_TARGET)
+8021q-objs := vlan.o vlanproc.o vlan_dev.o
 
 include $(TOPDIR)/Rules.make

net/Makefile

@@ -7,47 +7,43 @@
 
 O_TARGET :=	network.o
 
-mod-subdirs :=	ipv4/netfilter ipv6/netfilter ipx irda bluetooth atm netlink sched
+mod-subdirs :=	ipv4 ipv4/netfilter ipv6/netfilter ipx irda bluetooth atm netlink sched
 export-objs :=	netsyms.o
 
-subdir-y :=	core ethernet
-subdir-m :=	ipv4 # hum?
+obj-y	:= socket.o core/
 
-
-subdir-$(CONFIG_NET)		+= 802 sched netlink
-subdir-$(CONFIG_INET)		+= ipv4
-subdir-$(CONFIG_NETFILTER)	+= ipv4/netfilter
-subdir-$(CONFIG_UNIX)		+= unix
-subdir-$(CONFIG_IPV6)		+= ipv6
+obj-$(CONFIG_NET)		+= ethernet/ 802/ sched/ netlink/
+obj-$(CONFIG_INET)		+= ipv4/
+obj-$(CONFIG_NETFILTER)		+= ipv4/netfilter/
+obj-$(CONFIG_UNIX)		+= unix/
+obj-$(CONFIG_IPV6)		+= ipv6/
 
 ifneq ($(CONFIG_IPV6),n)
 ifneq ($(CONFIG_IPV6),)
-subdir-$(CONFIG_NETFILTER)	+= ipv6/netfilter
+obj-$(CONFIG_NETFILTER)		+= ipv6/netfilter/
 endif
 endif
 
-subdir-$(CONFIG_KHTTPD)		+= khttpd
-subdir-$(CONFIG_PACKET)		+= packet
-subdir-$(CONFIG_NET_SCHED)	+= sched
-subdir-$(CONFIG_BRIDGE)		+= bridge
-subdir-$(CONFIG_IPX)		+= ipx
-subdir-$(CONFIG_ATALK)		+= appletalk
-subdir-$(CONFIG_WAN_ROUTER)	+= wanrouter
-subdir-$(CONFIG_X25)		+= x25
-subdir-$(CONFIG_LAPB)		+= lapb
-subdir-$(CONFIG_NETROM)		+= netrom
-subdir-$(CONFIG_ROSE)		+= rose
-subdir-$(CONFIG_AX25)		+= ax25
-subdir-$(CONFIG_IRDA)		+= irda
-subdir-$(CONFIG_BLUEZ)		+= bluetooth
-subdir-$(CONFIG_SUNRPC)		+= sunrpc
-subdir-$(CONFIG_ATM)		+= atm
-subdir-$(CONFIG_DECNET)		+= decnet
-subdir-$(CONFIG_ECONET)		+= econet
-subdir-$(CONFIG_VLAN_8021Q)           += 8021q
-
-
-obj-y	:= socket.o $(join $(subdir-y), $(patsubst %,/%.o,$(notdir $(subdir-y))))
+obj-$(CONFIG_KHTTPD)		+= khttpd/
+obj-$(CONFIG_PACKET)		+= packet/
+obj-$(CONFIG_NET_SCHED)		+= sched/
+obj-$(CONFIG_BRIDGE)		+= bridge/
+obj-$(CONFIG_IPX)		+= ipx/
+obj-$(CONFIG_ATALK)		+= appletalk/
+obj-$(CONFIG_WAN_ROUTER)	+= wanrouter/
+obj-$(CONFIG_X25)		+= x25/
+obj-$(CONFIG_LAPB)		+= lapb/
+obj-$(CONFIG_NETROM)		+= netrom/
+obj-$(CONFIG_ROSE)		+= rose/
+obj-$(CONFIG_AX25)		+= ax25/
+obj-$(CONFIG_IRDA)		+= irda/
+obj-$(CONFIG_BLUEZ)		+= bluetooth/
+obj-$(CONFIG_SUNRPC)		+= sunrpc/
+obj-$(CONFIG_ATM)		+= atm/
+obj-$(CONFIG_DECNET)		+= decnet/
+obj-$(CONFIG_ECONET)		+= econet/
+obj-$(CONFIG_VLAN_8021Q)	+= 8021q/
+
 ifeq ($(CONFIG_NET),y)
 obj-$(CONFIG_MODULES)		+= netsyms.o
 obj-$(CONFIG_SYSCTL)		+= sysctl_net.o

net/appletalk/Makefile

 #
 # Makefile for the Linux AppleTalk layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-O_TARGET := appletalk.o
 
 export-objs = ddp.o
 
-obj-y	 := aarp.o ddp.o
-obj-m	 := $(O_TARGET)
+obj-$(CONFIG_ATALK) += appletalk.o
 
-obj-$(CONFIG_SYSCTL) += sysctl_net_atalk.o
+appletalk-y			:= aarp.o ddp.o
+appletalk-$(CONFIG_SYSCTL)	+= sysctl_net_atalk.o
+appletalk-objs			:= $(appletalk-y)
 
 include $(TOPDIR)/Rules.make
 

net/atm/Makefile

@@ -2,28 +2,15 @@
 # Makefile for the ATM Protocol Families.
 #
 
-O_TARGET	:= atm.o
-
 export-objs 	:= common.o atm_misc.o raw.o resources.o ipcommon.o proc.o
 
 mpoa-objs	:= mpc.o mpoa_caches.o mpoa_proc.o
 
 obj-$(CONFIG_ATM) := addr.o pvc.o signaling.o svc.o common.o atm_misc.o raw.o resources.o
 
-ifeq ($(CONFIG_ATM_CLIP),y)
-obj-y += clip.o
-NEED_IPCOM = ipcommon.o
-endif
-
-ifeq ($(CONFIG_NET_SCH_ATM),y)
-NEED_IPCOM = ipcommon.o
-endif
-
-obj-y += $(NEED_IPCOM)
-
-ifeq ($(CONFIG_PROC_FS),y)
-obj-y += proc.o
-endif
+obj-$(CONFIG_ATM_CLIP) += clip.o ipcommon.o
+obj-$(CONFIG_NET_SCH_ATM) += ipcommon.o
+obj-$(CONFIG_PROC_FS) += proc.o
 
 obj-$(CONFIG_ATM_LANE) += lec.o
 obj-$(CONFIG_ATM_MPOA) += mpoa.o

net/ax25/Makefile

 #
 # Makefile for the Linux AX.25 layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-
-O_TARGET := ax25.o
 
 export-objs := af_ax25.o
 
-obj-y	 := ax25_addr.o ax25_dev.o ax25_iface.o ax25_in.o ax25_ip.o ax25_out.o \
+obj-$(CONFIG_AX25) += ax25.o
+
+ax25-y	 := ax25_addr.o ax25_dev.o ax25_iface.o ax25_in.o ax25_ip.o ax25_out.o \
 	    ax25_route.o ax25_std_in.o ax25_std_subr.o ax25_std_timer.o \
 	    ax25_subr.o ax25_timer.o ax25_uid.o af_ax25.o
-
-obj-m    := $(O_TARGET)
-
-obj-$(CONFIG_AX25_DAMA_SLAVE) += ax25_ds_in.o ax25_ds_subr.o ax25_ds_timer.o
-obj-$(CONFIG_SYSCTL) += sysctl_net_ax25.o
+ax25-$(CONFIG_AX25_DAMA_SLAVE) += ax25_ds_in.o ax25_ds_subr.o ax25_ds_timer.o
+ax25-$(CONFIG_SYSCTL) += sysctl_net_ax25.o
+ax25-objs := $(ax25-y)
 
 include $(TOPDIR)/Rules.make
 

net/bluetooth/Makefile

 #
 # Makefile for the Bluetooth subsystem
 #
-O_TARGET	:= bluetooth.o
 
-list-multi	:= bluez.o
 export-objs	:= syms.o
-bluez-objs	:= af_bluetooth.o hci_core.o hci_conn.o hci_event.o hci_sock.o lib.o syms.o
 
 obj-$(CONFIG_BLUEZ) += bluez.o
 obj-$(CONFIG_BLUEZ_L2CAP) += l2cap.o
 obj-$(CONFIG_BLUEZ_SCO) += sco.o
 
-include $(TOPDIR)/Rules.make
+bluez-objs	:= af_bluetooth.o hci_core.o hci_conn.o hci_event.o hci_sock.o lib.o syms.o
 
-bluez.o: $(bluez-objs)
-	$(LD) -r -o $@ $(bluez-objs)
+include $(TOPDIR)/Rules.make

net/bridge/Makefile

 #
 # Makefile for the IEEE 802.1d ethernet bridging layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
 
-O_TARGET	:= bridge.o
-obj-y		:= br.o br_device.o br_fdb.o br_forward.o br_if.o br_input.o \
+obj-$(CONFIG_BRIDGE) += bridge.o
+
+bridge-objs	:= br.o br_device.o br_fdb.o br_forward.o br_if.o br_input.o \
 			br_ioctl.o br_notify.o br_stp.o br_stp_bpdu.o \
 			br_stp_if.o br_stp_timer.o
-obj-m		:= $(O_TARGET)
 
 include $(TOPDIR)/Rules.make

net/core/Makefile

 #
 # Makefile for the Linux networking core.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-O_TARGET := core.o
 
 export-objs := netfilter.o profile.o
 

net/decnet/Makefile

-# Note 2! The CFLAGS definition is now in the main makefile...
 
-O_TARGET := decnet.o
-obj-y    := af_decnet.o dn_nsp_in.o dn_nsp_out.o dn_route.o dn_dev.o dn_neigh.o dn_timer.o
-obj-m	 := $(O_TARGET)
+obj-$(CONFIG_DECNET) += decnet.o
 
-obj-$(CONFIG_DECNET_ROUTER) += dn_fib.o dn_rules.o dn_table.o
-obj-$(CONFIG_DECNET_FW) += dn_fw.o
-
-obj-y += sysctl_net_decnet.o
+decnet-y := af_decnet.o dn_nsp_in.o dn_nsp_out.o dn_route.o dn_dev.o dn_neigh.o dn_timer.o
+decnet-$(CONFIG_DECNET_ROUTER) += dn_fib.o dn_rules.o dn_table.o
+decnet-$(CONFIG_DECNET_FW) += dn_fw.o
+decnet-y += sysctl_net_decnet.o
+decnet-objs := $(decnet-y)
 
 include $(TOPDIR)/Rules.make
 

net/econet/Makefile

 #
 # Makefile for Econet support code.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
 
-O_TARGET := econet.o
+obj-$(CONFIG_ECONET) += econet.o
 
-obj-y := af_econet.o
-obj-m := $(O_TARGET)
+econet-objs := af_econet.o
 
 include $(TOPDIR)/Rules.make
 

net/ethernet/Makefile

 #
 # Makefile for the Linux Ethernet layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-O_TARGET := ethernet.o
-
-OBJS	:= eth.o
-
-ifeq ($(CONFIG_SYSCTL),y)
-OBJS += sysctl_net_ether.o
-endif
-
-ifdef CONFIG_IPX
-OBJ2	:= pe2.o
-endif
-
-ifdef CONFIG_ATALK
-OBJ2	:= pe2.o
-endif
 
-obj-$(CONFIG_NET)	:= $(OBJS) $(OBJ2)
+obj-y					+= eth.o
+obj-$(CONFIG_SYSCTL)			+= sysctl_net_ether.o
+obj-$(subst m,y,$(CONFIG_IPX))		+= pe2.o
+obj-$(subst m,y,$(CONFIG_ATALK))	+= pe2.o
 
 include $(TOPDIR)/Rules.make

net/ipv4/Makefile

 #
 # Makefile for the Linux TCP/IP (INET) layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-O_TARGET := ipv4.o
 
 export-objs = ipip.o ip_gre.o
 

net/ipv4/netfilter/Makefile

@@ -2,9 +2,9 @@
 # Makefile for the netfilter modules on top of IPv4.
 #
 
-O_TARGET := netfilter.o
-
-export-objs = ip_conntrack_standalone.o ip_fw_compat.o ip_nat_standalone.o ip_tables.o arp_tables.o
+export-objs  := ip_conntrack_standalone.o ip_fw_compat.o ip_nat_standalone.o \
+		ip_tables.o arp_tables.o ip_conntrack_ftp.o \
+		ip_conntrack_irc.o
 
 # objects for the conntrack and NAT core (used by standalone and backw. compat)
 ip_nf_conntrack-objs	:= ip_conntrack_core.o ip_conntrack_proto_generic.o ip_conntrack_proto_tcp.o ip_conntrack_proto_udp.o ip_conntrack_proto_icmp.o
@@ -25,14 +25,7 @@ obj-$(CONFIG_IP_NF_CONNTRACK) += ip_conntrack.o
 
 # connection tracking helpers
 obj-$(CONFIG_IP_NF_FTP) += ip_conntrack_ftp.o
-ifdef CONFIG_IP_NF_NAT_FTP
-	export-objs += ip_conntrack_ftp.o
-endif
-
 obj-$(CONFIG_IP_NF_IRC) += ip_conntrack_irc.o
-ifdef CONFIG_IP_NF_NAT_IRC
-	export-objs += ip_conntrack_irc.o
-endif
 
 # NAT helpers 
 obj-$(CONFIG_IP_NF_NAT_FTP) += ip_nat_ftp.o

net/ipv6/Makefile

 #
 # Makefile for the Linux TCP/IP (INET6) layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-
-
-O_TARGET := ipv6.o
 
 export-objs :=  ipv6_syms.o
 
-obj-y :=	af_inet6.o ip6_output.o ip6_input.o addrconf.o sit.o \
+obj-$(CONFIG_IPV6) += ipv6.o
+
+ipv6-objs :=	af_inet6.o ip6_output.o ip6_input.o addrconf.o sit.o \
 		route.o ip6_fib.o ipv6_sockglue.o ndisc.o udp.o raw.o \
 		protocol.o icmp.o mcast.o reassembly.o tcp_ipv6.o \
 		exthdrs.o sysctl_net_ipv6.o datagram.o proc.o \
 		ip6_flowlabel.o ipv6_syms.o
 
-obj-m  := $(O_TARGET)
-
 #obj-$(CONFIG_IPV6_FIREWALL) += ip6_fw.o
 
 include $(TOPDIR)/Rules.make

net/ipv6/netfilter/Makefile

 #
 # Makefile for the netfilter modules on top of IPv6.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-O_TARGET := netfilter.o
 
 export-objs := ip6_tables.o
 

net/ipx/Makefile

 #
 # Makefile for the Linux IPX layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-# We only get in/to here if CONFIG_IPX = 'y' or 'm'
-
-O_TARGET := ipx.o
 
 export-objs = af_ipx.o af_spx.o
 
-obj-y	:= af_ipx.o
-
-ifeq ($(CONFIG_IPX),m)
-  obj-m += $(O_TARGET)
-endif
+obj-$(CONFIG_IPX) += ipx.o
 
-obj-$(CONFIG_SYSCTL) += sysctl_net_ipx.o
-obj-$(CONFIG_SPX) += af_spx.o
+ipx-y			:= af_ipx.o
+ipx-$(CONFIG_SYSCTL)	+= sysctl_net_ipx.o
+ipx-$(CONFIG_SPX)	+= af_spx.o
+ipx-objs		:= $(ipx-y)
 
 include $(TOPDIR)/Rules.make

net/irda/Makefile

 #
 # Makefile for the Linux IrDA protocol layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-O_TARGET := irda.o
 
 export-objs := irsyms.o
 
-obj-y	 := iriap.o iriap_event.o irlmp.o irlmp_event.o irlmp_frame.o \
+obj-$(CONFIG_IRDA) += irda.o
+obj-$(CONFIG_IRLAN) += irlan/
+obj-$(CONFIG_IRNET) += irnet/
+obj-$(CONFIG_IRCOMM) += ircomm/
+
+irda-y := iriap.o iriap_event.o irlmp.o irlmp_event.o irlmp_frame.o \
           irlap.o irlap_event.o irlap_frame.o timer.o qos.o irqueue.o \
           irttp.o irda_device.o irias_object.o crc.o wrapper.o af_irda.o \
 	  discovery.o parameters.o irsyms.o
-
-ifeq ($(CONFIG_IRDA),m)
-obj-m   := $(O_TARGET)
-endif
-
-obj-$(CONFIG_PROC_FS) += irproc.o
-obj-$(CONFIG_SYSCTL) += irsysctl.o
-
-subdir-$(CONFIG_IRLAN) += irlan
-subdir-$(CONFIG_IRNET) += irnet
-subdir-$(CONFIG_IRCOMM) += ircomm
-
-ifeq ($(CONFIG_IRLAN),y)
-obj-y += irlan/irlan.o
-endif
-
-ifeq ($(CONFIG_IRNET),y)
-obj-y += irnet/irnet.o
-endif
-
-ifeq ($(CONFIG_IRCOMM),y)
-obj-y += ircomm/ircomm_and_tty.o
-endif
+irda-$(CONFIG_PROC_FS) += irproc.o
+irda-$(CONFIG_SYSCTL) += irsysctl.o
+irda-objs := $(irda-y)
 
 include $(TOPDIR)/Rules.make

net/irda/ircomm/Makefile

@@ -2,14 +2,12 @@
 # Makefile for the Linux IrDA IrCOMM protocol layer.
 #
 
-O_TARGET := ircomm_and_tty.o
-
 export-objs := ircomm_core.o
 
+obj-$(CONFIG_IRCOMM) += ircomm.o ircomm-tty.o
+
 ircomm-objs := ircomm_core.o ircomm_event.o ircomm_lmp.o ircomm_ttp.o
 ircomm-tty-objs := ircomm_tty.o ircomm_tty_attach.o ircomm_tty_ioctl.o ircomm_param.o
 
-obj-$(CONFIG_IRCOMM) += ircomm.o ircomm-tty.o
-
 include $(TOPDIR)/Rules.make
 

net/irda/irlan/Makefile

 #
 # Makefile for the Linux IrDA IrLAN protocol layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
 
-O_TARGET := irlan.o
+obj-$(CONFIG_IRLAN) += irlan.o
 
-obj-y	:= irlan_common.o irlan_eth.o irlan_event.o irlan_client.o irlan_provider.o irlan_filter.o irlan_provider_event.o irlan_client_event.o
-obj-m	:= $(O_TARGET)
+irlan-objs := irlan_common.o irlan_eth.o irlan_event.o irlan_client.o irlan_provider.o irlan_filter.o irlan_provider_event.o irlan_client_event.o
 
 include $(TOPDIR)/Rules.make

net/irda/irnet/Makefile

 #
 # Makefile for the Linux IrDA IrNET protocol layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
 
-MOD_LIST_NAME := IRDA_MODULES
-O_TARGET := irnet.o
+obj-$(CONFIG_IRNET) += irnet.o
 
-obj-y	:= irnet_ppp.o irnet_irda.o
-obj-m	:= $(O_TARGET)
+irnet-objs := irnet_ppp.o irnet_irda.o
 
 include $(TOPDIR)/Rules.make

net/khttpd/Makefile

 #
 # Makefile for kHTTPd
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-O_TARGET := khttpd.o
 
-obj-m := 	$(O_TARGET)
-obj-y := 	main.o accept.o datasending.o logging.o misc.o rfc.o rfc_time.o security.o \
-		sockets.o sysctl.o userspace.o waitheaders.o
+obj-$(CONFIG_KHTTPD) += khttpd.o
 
+khttpd-objs := 	main.o accept.o datasending.o logging.o misc.o rfc.o \
+		rfc_time.o security.o sockets.o sysctl.o userspace.o \
+		waitheaders.o
 
 include $(TOPDIR)/Rules.make
 

net/lapb/Makefile

 #
 # Makefile for the Linux LAPB layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-
-O_TARGET := lapb.o
 
 export-objs := lapb_iface.o
 
-obj-y	 := lapb_in.o lapb_out.o lapb_subr.o lapb_timer.o lapb_iface.o
-obj-m    := $(O_TARGET)
+obj-$(CONFIG_LAPB) += lapb.o
+
+lapb-objs := lapb_in.o lapb_out.o lapb_subr.o lapb_timer.o lapb_iface.o
 
 include $(TOPDIR)/Rules.make
 

net/netlink/Makefile

 #
 # Makefile for the netlink driver.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-O_TARGET := netlink.o
 
 export-objs := af_netlink.o
 
 obj-y  				:= af_netlink.o
-
-obj-m  :=
-
 obj-$(CONFIG_NETLINK_DEV)	+= netlink_dev.o
 
 include $(TOPDIR)/Rules.make

net/netrom/Makefile

 #
 # Makefile for the Linux NET/ROM layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-O_TARGET := netrom.o
 
-obj-y	 := af_netrom.o nr_dev.o nr_in.o nr_loopback.o nr_out.o nr_route.o \
-	    nr_subr.o nr_timer.o
-obj-m    := $(O_TARGET)
+obj-$(CONFIG_NETROM) += netrom.o
 
-obj-$(CONFIG_SYSCTL) += sysctl_net_netrom.o
+netrom-y		:= af_netrom.o nr_dev.o nr_in.o nr_loopback.o \
+			   nr_out.o nr_route.o nr_subr.o nr_timer.o
+netrom-$(CONFIG_SYSCTL)	+= sysctl_net_netrom.o
+netrom-objs		:= $(netrom-y)
 
 include $(TOPDIR)/Rules.make
 

net/packet/Makefile

 #
 # Makefile for the packet AF.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-O_TARGET := packet.o
 
 obj-$(CONFIG_PACKET) += af_packet.o
 

net/rose/Makefile

 #
 # Makefile for the Linux Rose (X.25 PLP) layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
 
-O_TARGET := rose.o
+obj-$(CONFIG_ROSE) += rose.o
 
-obj-y	 := af_rose.o rose_dev.o rose_in.o rose_link.o rose_loopback.o \
+rose-y	  := af_rose.o rose_dev.o rose_in.o rose_link.o rose_loopback.o \
 	     rose_out.o rose_route.o rose_subr.o rose_timer.o
-obj-m    := $(O_TARGET)
-
-obj-$(CONFIG_SYSCTL) += sysctl_net_rose.o
+rose-$(CONFIG_SYSCTL) += sysctl_net_rose.o
+rose-objs := $(rose-y)
 
 include $(TOPDIR)/Rules.make
 

net/sched/Makefile

@@ -2,11 +2,8 @@
 # Makefile for the Linux Traffic Control Unit.
 #
 
-O_TARGET := sched.o
-
 obj-y	:= sch_generic.o
 
-
 obj-$(CONFIG_NET_SCHED)		+= sch_api.o sch_fifo.o
 obj-$(CONFIG_NET_ESTIMATOR)	+= estimator.o
 obj-$(CONFIG_NET_CLS)		+= cls_api.o

net/sunrpc/Makefile

 #
 # Makefile for Linux kernel SUN RPC
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
 
-O_TARGET := sunrpc.o
+obj-$(CONFIG_SUNRPC) += sunrpc.o
 
 export-objs := sunrpc_syms.o
 
-obj-y    := clnt.o xprt.o sched.o \
+sunrpc-y := clnt.o xprt.o sched.o \
 	    auth.o auth_null.o auth_unix.o \
 	    svc.o svcsock.o svcauth.o \
 	    pmap_clnt.o xdr.o sunrpc_syms.o
-
-obj-$(CONFIG_PROC_FS) += stats.o
-obj-$(CONFIG_SYSCTL) += sysctl.o
-
-obj-m  := $(O_TARGET)
+sunrpc-$(CONFIG_PROC_FS) += stats.o
+sunrpc-$(CONFIG_SYSCTL) += sysctl.o
+sunrpc-objs := $(sunrpc-y)
 
 include $(TOPDIR)/Rules.make

net/unix/Makefile

 #
 # Makefile for the Linux unix domain socket layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-O_TARGET := unix.o
 
-obj-y	 := af_unix.o garbage.o
-obj-m    := $(O_TARGET)
+obj-$(CONFIG_UNIX)	+= unix.o
 
-obj-$(CONFIG_SYSCTL) += sysctl_net_unix.o
+unix-y			:= af_unix.o garbage.o
+unix-$(CONFIG_SYSCTL)	+= sysctl_net_unix.o
+unix-objs		:= $(unix-y)
 
 include $(TOPDIR)/Rules.make
 

net/wanrouter/Makefile

 #
 # Makefile for the Linux WAN router layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-O_TARGET := wanrouter.o
 
 export-objs := wanmain.o
 
-obj-y :=  wanproc.o wanmain.o
-obj-m := $(O_TARGET)
-ifneq ($(CONFIG_VENDOR_SANGOMA),n)
-	obj-m += $(O_TARGET)
-endif
+obj-$(CONFIG_WAN_ROUTER) += wanrouter.o
+
+wanrouter-objs :=  wanproc.o wanmain.o
 
 include $(TOPDIR)/Rules.make

net/x25/Makefile

 #
 # Makefile for the Linux X.25 Packet layer.
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definition is now in the main makefile...
-
-O_TARGET := x25.o
 
-obj-y	 := af_x25.o x25_dev.o x25_facilities.o x25_in.o x25_link.o x25_out.o \
-	    x25_route.o x25_subr.o x25_timer.o
-obj-m    := $(O_TARGET)
+obj-$(CONFIG_X25) += x25.o
 
-obj-$(CONFIG_SYSCTL) += sysctl_net_x25.o
+x25-y			:= af_x25.o x25_dev.o x25_facilities.o x25_in.o \
+			   x25_link.o x25_out.o x25_route.o x25_subr.o \
+			   x25_timer.o
+x25-$(CONFIG_SYSCTL)	+= sysctl_net_x25.o
+x25-objs		:= $(x25-y)
 
 include $(TOPDIR)/Rules.make
 

sound/Makefile

@@ -8,25 +8,13 @@ export-objs     := sound_core.o
 mod-subdirs	:= oss core i2c drivers isa pci ppc synth
 
 obj-$(CONFIG_SOUND) += soundcore.o
+obj-$(CONFIG_SOUND_PRIME) += oss/
+obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/
 
-subdir-$(CONFIG_SOUND_PRIME) += oss
-ifeq ($(CONFIG_SOUND_PRIME),y)
-  obj-y += oss/_oss.o
-endif
-
-subdir-$(CONFIG_SND) += core i2c drivers isa pci ppc arm synth
 ifeq ($(CONFIG_SND),y)
-  obj-y += core/_core.o i2c/_i2c.o
-  obj-y += drivers/_drivers.o
-  obj-y += isa/_isa.o
-  obj-y += pci/_pci.o
-  obj-y += arm/_arm.o
-  obj-y += ppc/_ppc.o
-  obj-y += synth/_synth.o
   obj-y += last.o
 endif
 
 soundcore-objs  := sound_core.o sound_firmware.o
 
-
 include $(TOPDIR)/Rules.make

sound/arm/Makefile

@@ -2,8 +2,6 @@
 # Makefile for ALSA
 #
 
-O_TARGET    := _arm.o
-
 snd-sa11xx-uda1341-objs := sa11xx-uda1341.o
 
 # Toplevel Module Dependency

sound/core/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 1999,2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _core.o
-
 export-objs  := sound.o pcm.o pcm_lib.o rawmidi.o timer.o rtctimer.o hwdep.o
 
 mod-subdirs  := oss seq
@@ -29,26 +27,10 @@ ifeq ($(subst m,y,$(CONFIG_RTC)),y)
   obj-$(CONFIG_SND_RTCTIMER) += snd-rtctimer.o
 endif
 obj-$(CONFIG_SND_HWDEP) += snd-hwdep.o
-
-subdir-$(CONFIG_SND_MIXER_OSS) += oss
-subdir-$(CONFIG_SND_PCM_OSS) += oss
-ifeq ($(filter $(subdir-y),oss),oss)
-  obj-y += oss/_oss.o
-endif
-
-obj-$(CONFIG_SND_PCM_OSS) += snd-pcm.o snd-timer.o
-
-subdir-$(CONFIG_SND_SEQUENCER) += seq
-ifeq ($(CONFIG_SND_SEQUENCER),y)
-  obj-y += seq/_seq.o
-endif
-
-obj-$(CONFIG_SND_SEQUENCER) += snd-timer.o
-
-subdir-$(CONFIG_SND_BIT32_EMUL) += ioctl32
-ifeq ($(CONFIG_SND_BIT32_EMUL),y)
-  obj-y += ioctl32/_ioctl32.o
-endif
+obj-$(CONFIG_SND_MIXER_OSS) += oss/
+obj-$(CONFIG_SND_PCM_OSS) += snd-pcm.o snd-timer.o oss/
+obj-$(CONFIG_SND_SEQUENCER) += snd-timer.o seq/
+obj-$(CONFIG_SND_BIT32_EMUL) += ioctl32/
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_DUMMY) += snd-pcm.o snd-timer.o snd.o

sound/core/ioctl32/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 1999 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _ioctl32.o
-
 snd-ioctl32-objs := ioctl32.o pcm32.o rawmidi32.o timer32.o hwdep32.o
 ifeq ($(CONFIG_SND_SEQUENCER),y)
   snd-ioctl32-objs += seq32.o

sound/core/oss/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 1999 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _oss.o
-
 export-objs  := mixer_oss.o
 
 snd-mixer-oss-objs := mixer_oss.o

sound/core/seq/Makefile

@@ -3,19 +3,10 @@
 # Copyright (c) 1999 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _seq.o
-
 mod-subdirs  := instr
 
-subdir-$(CONFIG_SND) += instr
-ifeq ($(CONFIG_SND),y)
-  obj-y        += instr/_instr.o
-endif
-
-subdir-$(CONFIG_SND_SEQUENCER_OSS) += oss
-ifeq ($(CONFIG_SND_SEQUENCER_OSS),y)
-  obj-y	     += oss/_oss.o
-endif
+obj-$(CONFIG_SND) += instr/
+obj-$(CONFIG_SND_SEQUENCER_OSS) += oss/
 
 export-objs  := seq_device.o seq.o seq_ports.o seq_instr.o seq_midi_emul.o \
 		seq_midi_event.o seq_virmidi.o

sound/core/seq/instr/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 1999 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _instr.o
-
 export-objs  := ainstr_fm.o ainstr_simple.o ainstr_gf1.o ainstr_iw.o
 
 snd-ainstr-fm-objs := ainstr_fm.o

sound/core/seq/oss/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 1999 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _oss.o
-
 snd-seq-oss-objs  := seq_oss.o seq_oss_init.o seq_oss_timer.o seq_oss_ioctl.o \
 		     seq_oss_event.o seq_oss_rw.o seq_oss_synth.o \
 		     seq_oss_midi.o seq_oss_readq.o seq_oss_writeq.o

sound/drivers/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _drivers.o
-
 mod-subdirs  := opl3 mpu401
 
 snd-dummy-objs := dummy.o
@@ -18,9 +16,6 @@ obj-$(CONFIG_SND_VIRMIDI) += snd-virmidi.o
 obj-$(CONFIG_SND_SERIAL_U16550) += snd-serial-u16550.o
 obj-$(CONFIG_SND_MTPAV) += snd-mtpav.o
 
-subdir-$(CONFIG_SND) += opl3 mpu401
-ifeq ($(CONFIG_SND),y)
-  obj-y += mpu401/_mpu401.o opl3/_opl3.o
-endif
+obj-$(CONFIG_SND) += opl3/ mpu401/
 
 include $(TOPDIR)/Rules.make

sound/drivers/mpu401/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _mpu401.o
-
 export-objs  := mpu401_uart.o
 
 snd-mpu401-objs := mpu401.o

sound/drivers/opl3/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _opl3.o
-
 export-objs  := opl3_lib.o
 
 snd-opl3-lib-objs := opl3_lib.o opl3_synth.o

sound/i2c/Makefile

@@ -3,7 +3,7 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _i2c.o
+mod-subdirs := l3
 
 export-objs  := i2c.o cs8427.o tea6330t.o
 
@@ -11,13 +11,7 @@ snd-i2c-objs := i2c.o
 snd-cs8427-objs := cs8427.o
 snd-tea6330t-objs := tea6330t.o
 
-ifeq ($(subst m,y,$(CONFIG_L3)),y)
-  subdir-$(CONFIG_L3) += l3
-endif
-ifeq ($(filter $(subdir-y),l3),l3)
-  subdir-m := l3
-  obj-y += l3/l3.o
-endif
+obj-$(CONFIG_SND) += l3/
 
 # Toplevel Module Dependency
 obj-$(CONFIG_SND_INTERWAVE_STB) += snd-tea6330t.o snd-i2c.o

sound/i2c/l3/Makefile

@@ -2,8 +2,6 @@
 # Makefile for ALSA
 #
 
-O_TARGET = l3.o
-
 export-objs += uda1341.o
 
 snd-uda1341-objs := uda1341.o

sound/isa/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _isa.o
-
 mod-subdirs  := ad1816a ad1848 cs423x es1688 gus opti9xx sb wavefront
 
 snd-als100-objs := als100.o
@@ -24,16 +22,7 @@ obj-$(CONFIG_SND_ES18XX) += snd-es18xx.o
 obj-$(CONFIG_SND_OPL3SA2) += snd-opl3sa2.o
 obj-$(CONFIG_SND_SGALAXY) += snd-sgalaxy.o
 
-subdir-$(CONFIG_SND) += ad1816a ad1848 cs423x es1688 gus opti9xx sb wavefront
-ifeq ($(CONFIG_SND),y)
-  obj-y += ad1816a/_ad1816a.o \
-	   ad1848/_ad1848.o \
-	   cs423x/_cs423x.o \
-	   es1688/_es1688.o \
-	   gus/_gus.o \
-	   opti9xx/_opti9xx.o \
-	   sb/_sb.o \
-	   wavefront/_wavefront.o
-endif
+obj-$(CONFIG_SND) += ad1816a/ ad1848/ cs423x/ es1688/ gus/ opti9xx/ \
+		     sb/ wavefront/
 
 include $(TOPDIR)/Rules.make

sound/isa/ad1816a/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _ad1816a.o
-
 export-objs  := ad1816a_lib.o
 
 snd-ad1816a-lib-objs := ad1816a_lib.o

sound/isa/ad1848/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _ad1848.o
-
 export-objs  := ad1848_lib.o
 
 snd-ad1848-lib-objs := ad1848_lib.o

sound/isa/cs423x/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _cs423x.o
-
 export-objs  := cs4231_lib.o cs4236_lib.o
 
 snd-cs4231-lib-objs := cs4231_lib.o

sound/isa/es1688/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _es1688.o
-
 export-objs  := es1688_lib.o
 
 snd-es1688-lib-objs := es1688_lib.o

sound/isa/gus/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _gus.o
-
 export-objs  := gus_main.o gus_volume.o
 
 snd-gus-lib-objs := gus_main.o \

sound/isa/opti9xx/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _opti9xx.o
-
 snd-opti92x-ad1848-objs := opti92x-ad1848.o
 snd-opti92x-cs4231-objs := opti92x-cs4231.o
 snd-opti93x-objs := opti93x.o

sound/isa/sb/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _sb.o
-
 export-objs  := emu8000.o emu8000_synth.o sb_common.o sb8_main.o sb16_main.o sb16_csp.o
 
 snd-sb-common-objs := sb_common.o sb_mixer.o

sound/isa/wavefront/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _wavefront.o
-
 snd-wavefront-objs := wavefront.o wavefront_fx.o wavefront_synth.o wavefront_midi.o
 
 # Toplevel Module Dependency

sound/oss/Makefile

@@ -3,8 +3,6 @@
 # 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
 # Rewritten to use lists instead of if-statements.
 
-O_TARGET	:= _oss.o
-
 # All of the (potential) objects that export symbols.
 # This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
 
@@ -78,23 +76,9 @@ ifeq ($(CONFIG_MIDI_EMU10K1),y)
   obj-$(CONFIG_SOUND_EMU10K1)	+= sound.o
 endif
 
-subdir-$(CONFIG_SOUND_EMU10K1) += emu10k1
-subdir-$(CONFIG_SOUND_CS4281) += cs4281
-
-ifeq ($(CONFIG_SOUND_EMU10K1),y)
-  obj-y += emu10k1/_emu10k1.o
-endif
-
-ifeq ($(CONFIG_SOUND_CS4281),y)
-  obj-y += cs4281/_cs4281.o
-endif
-
-subdir-$(CONFIG_DMASOUND) += dmasound
-
-ifeq ($(CONFIG_DMASOUND),y)
-  obj-y += dmasound/_dmasound.o
-endif
-
+obj-$(CONFIG_SOUND_EMU10K1)	+= emu10k1/
+obj-$(CONFIG_SOUND_CS4281)	+= cs4281/
+obj-$(CONFIG_DMASOUND)		+= dmasound/
 
 # Declare multi-part drivers.
 

sound/oss/cs4281/Makefile

 # Makefile for Cirrus Logic-Crystal CS4281 
 #
 
-O_TARGET := _cs4281.o
-
 obj-$(CONFIG_SOUND_CS4281) += cs4281.o
 
 cs4281-objs += cs4281m.o

sound/oss/dmasound/Makefile

 #
 # Makefile for the DMA sound driver
 #
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-# Note 2! The CFLAGS definitions are now in the main makefile...
-
-O_TARGET = _dmasound.o
 
 export-objs := dmasound_core.o
 

sound/oss/emu10k1/Makefile

@@ -2,8 +2,6 @@
 #
 # 12 Apr 2000 Rui Sousa
 
-O_TARGET := _emu10k1.o
-
 obj-$(CONFIG_SOUND_EMU10K1) += emu10k1.o
 
 emu10k1-objs := audio.o cardmi.o cardmo.o cardwi.o cardwo.o ecard.o \

sound/pci/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _pci.o
-
 mod-subdirs  := ac97 ali5451 cs46xx emu10k1 korg1212 nm256 rme9652 trident ymfpci
 
 snd-als4000-objs := als4000.o
@@ -42,17 +40,6 @@ obj-$(CONFIG_SND_SONICVIBES) += snd-sonicvibes.o
 obj-$(CONFIG_SND_VIA686) += snd-via686.o
 obj-$(CONFIG_SND_VIA8233) += snd-via8233.o
 
-subdir-$(CONFIG_SND) += ac97 ali5451 cs46xx emu10k1 korg1212 nm256 rme9652 trident ymfpci
-ifeq ($(CONFIG_SND),y)
-  obj-y += ac97/_ac97.o \
-	   ali5451/_ali5451.o \
-	   cs46xx/_cs46xx.o \
-	   emu10k1/_emu10k1.o \
-	   korg1212/_korg1212.o \
-	   nm256/_nm256.o \
-	   rme9652/_rme9652.o \
-	   trident/_trident.o \
-	   ymfpci/_ymfpci.o
-endif
+obj-$(CONFIG_SND) += ac97/ ali5451/ cs46xx/ emu10k1/ korg1212/ nm256/ rme9652/ trident/ ymfpci/
 
 include $(TOPDIR)/Rules.make

sound/pci/ac97/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _ac97.o
-
 export-objs  := ac97_codec.o ak4531_codec.o
 
 snd-ac97-codec-objs := ac97_codec.o

sound/pci/ali5451/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _ali5451.o
-
 snd-ali5451-objs := ali5451.o
 
 # Toplevel Module Dependency

sound/pci/cs46xx/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _cs46xx.o
-
 snd-cs46xx-objs := cs46xx.o cs46xx_lib.o
 
 # Toplevel Module Dependency

sound/pci/emu10k1/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _emu10k1.o
-
 export-objs  := emu10k1_main.o
 
 snd-emu10k1-objs := emu10k1.o emu10k1_main.o \

sound/pci/korg1212/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _korg1212.o
-
 snd-korg1212-objs := korg1212.o
 
 # Toplevel Module Dependency

sound/pci/nm256/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _nm256.o
-
 snd-nm256-objs := nm256.o
 
 # Toplevel Module Dependency

sound/pci/rme9652/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _rme9652.o
-
 export-objs  := rme9652_mem.o
 
 snd-rme9652-mem-objs := rme9652_mem.o

sound/pci/trident/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _trident.o
-
 export-objs  := trident_main.o
 
 snd-trident-objs := trident.o trident_main.o trident_memory.o

sound/pci/ymfpci/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _ymfpci.o
-
 snd-ymfpci-objs := ymfpci.o ymfpci_main.o
 
 # Toplevel Module Dependency

sound/ppc/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _ppc.o
-
 snd-powermac-objs := powermac.o pmac.o awacs.o burgundy.o daca.o tumbler.o keywest.o
 
 # Toplevel Module Dependency

sound/synth/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _synth.o
-
 mod-subdirs  := emux
 
 export-objs  := util_mem.o
@@ -18,9 +16,6 @@ ifeq ($(subst m,y,$(CONFIG_SND_SEQUENCER)),y)
   obj-$(CONFIG_SND_SBAWE) += snd-util-mem.o
 endif
 
-subdir-$(CONFIG_SND) += emux
-ifeq ($(CONFIG_SND),y)
-  obj-y += emux/_emux.o
-endif
+obj-$(CONFIG_SND) += emux/
 
 include $(TOPDIR)/Rules.make

sound/synth/emux/Makefile

@@ -3,8 +3,6 @@
 # Copyright (c) 2001 by Jaroslav Kysela <perex@suse.cz>
 #
 
-O_TARGET     := _emux.o
-
 export-objs  := emux.o
 
 snd-emux-synth-objs := emux.o emux_synth.o emux_seq.o emux_nrpn.o \