Commit bfb76444 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux

Pull thermal management updates from Zhang Rui:

 - Introduce generic ADC thermal driver, based on OF thermal (Laxman
   Dewangan)

 - Introduce new thermal driver for Tango chips (Marc Gonzalez)

 - Rockchip driver support for RK3399, RK3366, and some fixes (Caesar
   Wang, Elaine Zhang and Shawn Lin)

 - Add CPU power cooling model to Mediatek thermal driver (Dawei Chien)

 - Wider usage of dev_thermal_zone_of_sensor_register (Eduardo Valentin)

 - TI thermal driver gained a new maintainer (Keerthy).

 - Enabled powerclamp driver by checking CPU feature and package cstate
   counter instead of CPU whitelist (Jacob Pan)

 - Various fixes on thermal governor, OF thermal, Tegra, and RCAR

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (50 commits)
  thermal: tango: initialize TEMPSI_CFG
  thermal: rockchip: use the usleep_range instead of udelay
  thermal: rockchip: add the notes for better reading
  thermal: rockchip: Support RK3366 SoCs in the thermal driver
  thermal: rockchip: handle the power sequence for tsadc controller
  thermal: rockchip: update the tsadc table for rk3399
  thermal: rockchip: fixes the code_to_temp for tsadc driver
  thermal: rockchip: disable thermal->clk in err case
  thermal: tegra: add Tegra132 specific SOC_THERM driver
  thermal: fix ptr_ret.cocci warnings
  thermal: mediatek: Add cpu dynamic power cooling model.
  thermal: generic-adc: Add ADC based thermal sensor driver
  thermal: generic-adc: Add DT binding for ADC based thermal sensor
  thermal: tegra: fix static checker warning
  thermal: tegra: mark PM functions __maybe_unused
  thermal: add temperature sensor support for tango SoC
  thermal: hisilicon: fix IRQ imbalance enabling
  thermal: hisilicon: support to use any sensor
  thermal: rcar: Remove binding docs for r8a7794
  thermal: tegra: add PM support
  ...
parents 159d08f4 88ac9906
......@@ -26,6 +26,10 @@ Required properties :
of this property. See <dt-bindings/thermal/tegra124-soctherm.h> for a
list of valid values when referring to thermal sensors.
Note:
- the "critical" type trip points will be set to SOC_THERM hardware as the
shut down temperature. Once the temperature of this thermal zone is higher
than it, the system will be shutdown or reset by hardware.
Example :
......@@ -51,5 +55,13 @@ Example: referring to thermal sensors :
thermal-sensors =
<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
trips {
cpu_shutdown_trip: shutdown-trip {
temperature = <102500>;
hysteresis = <1000>;
type = "critical";
};
};
};
};
......@@ -11,7 +11,6 @@ Required properties:
- "renesas,thermal-r8a7791" (R-Car M2-W)
- "renesas,thermal-r8a7792" (R-Car V2H)
- "renesas,thermal-r8a7793" (R-Car M2-N)
- "renesas,thermal-r8a7794" (R-Car E2)
- reg : Address range of the thermal registers.
The 1st reg will be recognized as common register
if it has "interrupts".
......
* Tango Thermal
The SMP8758 SoC includes 3 instances of this temperature sensor
(in the CPU, video decoder, and PCIe controller).
Required properties:
- #thermal-sensor-cells: Should be 0 (see thermal.txt)
- compatible: "sigma,smp8758-thermal"
- reg: Address range of the thermal registers
Example:
cpu_temp: thermal@920100 {
#thermal-sensor-cells = <0>;
compatible = "sigma,smp8758-thermal";
reg = <0x920100 12>;
};
General Purpose Analog To Digital Converter (ADC) based thermal sensor.
On some of platforms, thermal sensor like thermistors are connected to
one of ADC channel and sensor resistance is read via voltage across the
sensor resistor. The voltage read across the sensor is mapped to
temperature using voltage-temperature lookup table.
Required properties:
===================
- compatible: Must be "generic-adc-thermal".
- temperature-lookup-table: Two dimensional array of Integer; lookup table
to map the relation between ADC value and
temperature. When ADC is read, the value is
looked up on the table to get the equivalent
temperature.
The first value of the each row of array is the
temperature in milliCelsius and second value of
the each row of array is the ADC read value.
- #thermal-sensor-cells: Should be 1. See ./thermal.txt for a description
of this property.
Example :
#include <dt-bindings/thermal/thermal.h>
i2c@7000c400 {
ads1015: ads1015@4a {
reg = <0x4a>;
compatible = "ads1015";
sampling-frequency = <3300>;
#io-channel-cells = <1>;
};
};
tboard_thermistor: thermal-sensor {
compatible = "generic-adc-thermal";
#thermal-sensor-cells = <0>;
io-channels = <&ads1015 1>;
io-channel-names = "sensor-channel";
temperature-lookup-table = < (-40000) 2578
(-39000) 2577
(-38000) 2576
(-37000) 2575
(-36000) 2574
(-35000) 2573
(-34000) 2572
(-33000) 2571
(-32000) 2569
(-31000) 2568
(-30000) 2567
::::::::::
118000 254
119000 247
120000 240
121000 233
122000 226
123000 220
124000 214
125000 208>;
};
dummy_cool_dev: dummy-cool-dev {
compatible = "dummy-cooling-dev";
#cooling-cells = <2>; /* min followed by max */
};
thermal-zones {
Tboard {
polling-delay = <15000>; /* milliseconds */
polling-delay-passive = <0>; /* milliseconds */
thermal-sensors = <&tboard_thermistor>;
trips {
therm_est_trip: therm_est_trip {
temperature = <40000>;
type = "active";
hysteresis = <1000>;
};
};
cooling-maps {
map0 {
trip = <&therm_est_trip>;
cooling-device = <&dummy_cool_dev THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
contribution = <100>;
};
};
};
};
......@@ -69,8 +69,8 @@ temperature) and throttle appropriate devices.
1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz)
This interface function removes the thermal zone device.
It deletes the corresponding entry form /sys/class/thermal folder and
unbind all the thermal cooling devices it uses.
It deletes the corresponding entry from /sys/class/thermal folder and
unbinds all the thermal cooling devices it uses.
1.1.3 struct thermal_zone_device *thermal_zone_of_sensor_register(
struct device *dev, int sensor_id, void *data,
......@@ -146,32 +146,32 @@ temperature) and throttle appropriate devices.
This interface function adds a new thermal cooling device (fan/processor/...)
to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself
to all the thermal zone devices register at the same time.
to all the thermal zone devices registered at the same time.
name: the cooling device name.
devdata: device private data.
ops: thermal cooling devices call-backs.
.get_max_state: get the Maximum throttle state of the cooling device.
.get_cur_state: get the Current throttle state of the cooling device.
.get_cur_state: get the Currently requested throttle state of the cooling device.
.set_cur_state: set the Current throttle state of the cooling device.
1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev)
This interface function remove the thermal cooling device.
It deletes the corresponding entry form /sys/class/thermal folder and
unbind itself from all the thermal zone devices using it.
This interface function removes the thermal cooling device.
It deletes the corresponding entry from /sys/class/thermal folder and
unbinds itself from all the thermal zone devices using it.
1.3 interface for binding a thermal zone device with a thermal cooling device
1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
int trip, struct thermal_cooling_device *cdev,
unsigned long upper, unsigned long lower, unsigned int weight);
This interface function bind a thermal cooling device to the certain trip
This interface function binds a thermal cooling device to a particular trip
point of a thermal zone device.
This function is usually called in the thermal zone device .bind callback.
tz: the thermal zone device
cdev: thermal cooling device
trip: indicates which trip point the cooling devices is associated with
in this thermal zone.
trip: indicates which trip point in this thermal zone the cooling device
is associated with.
upper:the Maximum cooling state for this trip point.
THERMAL_NO_LIMIT means no upper limit,
and the cooling device can be in max_state.
......@@ -184,13 +184,13 @@ temperature) and throttle appropriate devices.
1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
int trip, struct thermal_cooling_device *cdev);
This interface function unbind a thermal cooling device from the certain
This interface function unbinds a thermal cooling device from a particular
trip point of a thermal zone device. This function is usually called in
the thermal zone device .unbind callback.
tz: the thermal zone device
cdev: thermal cooling device
trip: indicates which trip point the cooling devices is associated with
in this thermal zone.
trip: indicates which trip point in this thermal zone the cooling device
is associated with.
1.4 Thermal Zone Parameters
1.4.1 struct thermal_bind_params
......@@ -210,13 +210,13 @@ temperature) and throttle appropriate devices.
this thermal zone and cdev, for a particular trip point.
If nth bit is set, then the cdev and thermal zone are bound
for trip point n.
.limits: This is an array of cooling state limits. Must have exactly
2 * thermal_zone.number_of_trip_points. It is an array consisting
of tuples <lower-state upper-state> of state limits. Each trip
will be associated with one state limit tuple when binding.
A NULL pointer means <THERMAL_NO_LIMITS THERMAL_NO_LIMITS>
on all trips. These limits are used when binding a cdev to a
trip point.
.binding_limits: This is an array of cooling state limits. Must have
exactly 2 * thermal_zone.number_of_trip_points. It is an
array consisting of tuples <lower-state upper-state> of
state limits. Each trip will be associated with one state
limit tuple when binding. A NULL pointer means
<THERMAL_NO_LIMITS THERMAL_NO_LIMITS> on all trips.
These limits are used when binding a cdev to a trip point.
.match: This call back returns success(0) if the 'tz and cdev' need to
be bound, as per platform data.
1.4.2 struct thermal_zone_params
......@@ -351,8 +351,8 @@ cdev[0-*]
RO, Optional
cdev[0-*]_trip_point
The trip point with which cdev[0-*] is associated in this thermal
zone; -1 means the cooling device is not associated with any trip
The trip point in this thermal zone which cdev[0-*] is associated
with; -1 means the cooling device is not associated with any trip
point.
RO, Optional
......
......@@ -11296,6 +11296,7 @@ F: drivers/platform/x86/thinkpad_acpi.c
TI BANDGAP AND THERMAL DRIVER
M: Eduardo Valentin <edubezval@gmail.com>
M: Keerthy <j-keerthy@ti.com>
L: linux-pm@vger.kernel.org
L: linux-omap@vger.kernel.org
S: Maintained
......
......@@ -307,17 +307,24 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
return 0;
}
#define DYNAMIC_POWER "dynamic-power-coefficient"
static void mtk_cpufreq_ready(struct cpufreq_policy *policy)
{
struct mtk_cpu_dvfs_info *info = policy->driver_data;
struct device_node *np = of_node_get(info->cpu_dev->of_node);
u32 capacitance = 0;
if (WARN_ON(!np))
return;
if (of_find_property(np, "#cooling-cells", NULL)) {
info->cdev = of_cpufreq_cooling_register(np,
policy->related_cpus);
of_property_read_u32(np, DYNAMIC_POWER, &capacitance);
info->cdev = of_cpufreq_power_cooling_register(np,
policy->related_cpus,
capacitance,
NULL);
if (IS_ERR(info->cdev)) {
dev_err(info->cpu_dev,
......
......@@ -77,7 +77,6 @@ static const u8 LM75_REG_TEMP[3] = {
struct lm75_data {
struct i2c_client *client;
struct device *hwmon_dev;
struct thermal_zone_device *tz;
struct mutex update_lock;
u8 orig_conf;
u8 resolution; /* In bits, between 9 and 12 */
......@@ -306,11 +305,9 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (IS_ERR(data->hwmon_dev))
return PTR_ERR(data->hwmon_dev);
data->tz = thermal_zone_of_sensor_register(data->hwmon_dev, 0,
data->hwmon_dev,
&lm75_of_thermal_ops);
if (IS_ERR(data->tz))
data->tz = NULL;
devm_thermal_zone_of_sensor_register(data->hwmon_dev, 0,
data->hwmon_dev,
&lm75_of_thermal_ops);
dev_info(dev, "%s: sensor '%s'\n",
dev_name(data->hwmon_dev), client->name);
......@@ -322,7 +319,6 @@ static int lm75_remove(struct i2c_client *client)
{
struct lm75_data *data = i2c_get_clientdata(client);
thermal_zone_of_sensor_unregister(data->hwmon_dev, data->tz);
hwmon_device_unregister(data->hwmon_dev);
lm75_write_value(client, LM75_REG_CONF, data->orig_conf);
return 0;
......
......@@ -259,7 +259,6 @@ struct ntc_data {
struct device *dev;
int n_comp;
char name[PLATFORM_NAME_SIZE];
struct thermal_zone_device *tz;
};
#if defined(CONFIG_OF) && IS_ENABLED(CONFIG_IIO)
......@@ -579,6 +578,7 @@ static const struct thermal_zone_of_device_ops ntc_of_thermal_ops = {
static int ntc_thermistor_probe(struct platform_device *pdev)
{
struct thermal_zone_device *tz;
const struct of_device_id *of_id =
of_match_device(of_match_ptr(ntc_match), &pdev->dev);
const struct platform_device_id *pdev_id;
......@@ -677,12 +677,10 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "Thermistor type: %s successfully probed.\n",
pdev_id->name);
data->tz = thermal_zone_of_sensor_register(data->dev, 0, data->dev,
&ntc_of_thermal_ops);
if (IS_ERR(data->tz)) {
tz = devm_thermal_zone_of_sensor_register(data->dev, 0, data->dev,
&ntc_of_thermal_ops);
if (IS_ERR(tz))
dev_dbg(&pdev->dev, "Failed to register to thermal fw.\n");
data->tz = NULL;
}
return 0;
err_after_sysfs:
......@@ -700,8 +698,6 @@ static int ntc_thermistor_remove(struct platform_device *pdev)
sysfs_remove_group(&data->dev->kobj, &ntc_attr_group);
ntc_iio_channel_release(pdata);
thermal_zone_of_sensor_unregister(data->dev, data->tz);
return 0;
}
......
......@@ -31,10 +31,8 @@ struct sensor_data {
};
struct scpi_thermal_zone {
struct list_head list;
int sensor_id;
struct scpi_sensors *scpi_sensors;
struct thermal_zone_device *tzd;
};
struct scpi_sensors {
......@@ -92,20 +90,6 @@ scpi_show_label(struct device *dev, struct device_attribute *attr, char *buf)
return sprintf(buf, "%s\n", sensor->info.name);
}
static void
unregister_thermal_zones(struct platform_device *pdev,
struct scpi_sensors *scpi_sensors)
{
struct list_head *pos;
list_for_each(pos, &scpi_sensors->thermal_zones) {
struct scpi_thermal_zone *zone;
zone = list_entry(pos, struct scpi_thermal_zone, list);
thermal_zone_of_sensor_unregister(&pdev->dev, zone->tzd);
}
}
static struct thermal_zone_of_device_ops scpi_sensor_ops = {
.get_temp = scpi_read_temp,
};
......@@ -118,7 +102,7 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
struct scpi_ops *scpi_ops;
struct device *hwdev, *dev = &pdev->dev;
struct scpi_sensors *scpi_sensors;
int ret, idx;
int idx, ret;
scpi_ops = get_scpi_ops();
if (!scpi_ops)
......@@ -232,47 +216,34 @@ static int scpi_hwmon_probe(struct platform_device *pdev)
INIT_LIST_HEAD(&scpi_sensors->thermal_zones);
for (i = 0; i < nr_sensors; i++) {
struct sensor_data *sensor = &scpi_sensors->data[i];
struct thermal_zone_device *z;
struct scpi_thermal_zone *zone;
if (sensor->info.class != TEMPERATURE)
continue;
zone = devm_kzalloc(dev, sizeof(*zone), GFP_KERNEL);
if (!zone) {
ret = -ENOMEM;
goto unregister_tzd;
}
if (!zone)
return -ENOMEM;
zone->sensor_id = i;
zone->scpi_sensors = scpi_sensors;
zone->tzd = thermal_zone_of_sensor_register(dev,
sensor->info.sensor_id, zone, &scpi_sensor_ops);
z = devm_thermal_zone_of_sensor_register(dev,
sensor->info.sensor_id,
zone,
&scpi_sensor_ops);
/*
* The call to thermal_zone_of_sensor_register returns
* an error for sensors that are not associated with
* any thermal zones or if the thermal subsystem is
* not configured.
*/
if (IS_ERR(zone->tzd)) {
if (IS_ERR(z)) {
devm_kfree(dev, zone);
continue;
}
list_add(&zone->list, &scpi_sensors->thermal_zones);
}
return 0;
unregister_tzd:
unregister_thermal_zones(pdev, scpi_sensors);
return ret;
}
static int scpi_hwmon_remove(struct platform_device *pdev)
{
struct scpi_sensors *scpi_sensors = platform_get_drvdata(pdev);
unregister_thermal_zones(pdev, scpi_sensors);
return 0;
}
......@@ -288,7 +259,6 @@ static struct platform_driver scpi_hwmon_platdrv = {
.of_match_table = scpi_of_match,
},
.probe = scpi_hwmon_probe,
.remove = scpi_hwmon_remove,
};
module_platform_driver(scpi_hwmon_platdrv);
......
......@@ -53,7 +53,6 @@
struct tmp102 {
struct i2c_client *client;
struct device *hwmon_dev;
struct thermal_zone_device *tz;
struct mutex lock;
u16 config_orig;
unsigned long last_update;
......@@ -232,10 +231,8 @@ static int tmp102_probe(struct i2c_client *client,
goto fail_restore_config;
}
tmp102->hwmon_dev = hwmon_dev;
tmp102->tz = thermal_zone_of_sensor_register(hwmon_dev, 0, hwmon_dev,
&tmp102_of_thermal_ops);
if (IS_ERR(tmp102->tz))
tmp102->tz = NULL;
devm_thermal_zone_of_sensor_register(hwmon_dev, 0, hwmon_dev,
&tmp102_of_thermal_ops);
dev_info(dev, "initialized\n");
......@@ -251,7 +248,6 @@ static int tmp102_remove(struct i2c_client *client)
{
struct tmp102 *tmp102 = i2c_get_clientdata(client);
thermal_zone_of_sensor_unregister(tmp102->hwmon_dev, tmp102->tz);
hwmon_device_unregister(tmp102->hwmon_dev);
/* Stop monitoring if device was stopped originally */
......
......@@ -115,7 +115,6 @@
struct sun4i_ts_data {
struct device *dev;
struct input_dev *input;
struct thermal_zone_device *tz;
void __iomem *base;
unsigned int irq;
bool ignore_fifo_data;
......@@ -366,10 +365,7 @@ static int sun4i_ts_probe(struct platform_device *pdev)
if (IS_ERR(hwmon))
return PTR_ERR(hwmon);
ts->tz = thermal_zone_of_sensor_register(ts->dev, 0, ts,
&sun4i_ts_tz_ops);
if (IS_ERR(ts->tz))
ts->tz = NULL;
devm_thermal_zone_of_sensor_register(ts->dev, 0, ts, &sun4i_ts_tz_ops);
writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
......@@ -377,7 +373,6 @@ static int sun4i_ts_probe(struct platform_device *pdev)
error = input_register_device(ts->input);
if (error) {
writel(0, ts->base + TP_INT_FIFOC);
thermal_zone_of_sensor_unregister(ts->dev, ts->tz);
return error;
}
}
......@@ -394,8 +389,6 @@ static int sun4i_ts_remove(struct platform_device *pdev)
if (ts->input)
input_unregister_device(ts->input);
thermal_zone_of_sensor_unregister(ts->dev, ts->tz);
/* Deactivate all IRQs */
writel(0, ts->base + TP_INT_FIFOC);
......
......@@ -260,16 +260,6 @@ config ARMADA_THERMAL
Enable this option if you want to have support for thermal management
controller present in Armada 370 and Armada XP SoC.
config TEGRA_SOCTHERM
tristate "Tegra SOCTHERM thermal management"
depends on ARCH_TEGRA
help
Enable this option for integrated thermal management support on NVIDIA
Tegra124 systems-on-chip. The driver supports four thermal zones
(CPU, GPU, MEM, PLLX). Cooling devices can be bound to the thermal
zones to manage temperatures. This option is also required for the
emergency thermal reset (thermtrip) feature to function.
config DB8500_CPUFREQ_COOLING
tristate "DB8500 cpufreq cooling"
depends on ARCH_U8500 || COMPILE_TEST
......@@ -377,6 +367,17 @@ depends on ARCH_STI && OF
source "drivers/thermal/st/Kconfig"
endmenu
config TANGO_THERMAL
tristate "Tango thermal management"
depends on ARCH_TANGO || COMPILE_TEST
help
Enable the Tango thermal driver, which supports the primitive
temperature sensor embedded in Tango chips since the SMP8758.
This sensor only generates a 1-bit signal to indicate whether
the die temperature exceeds a programmable threshold.
source "drivers/thermal/tegra/Kconfig"
config QCOM_SPMI_TEMP_ALARM
tristate "Qualcomm SPMI PMIC Temperature Alarm"
depends on OF && SPMI && IIO
......@@ -388,4 +389,14 @@ config QCOM_SPMI_TEMP_ALARM
real time die temperature if an ADC is present or an estimate of the
temperature based upon the over temperature stage value.
config GENERIC_ADC_THERMAL
tristate "Generic ADC based thermal sensor"
depends on IIO
help
This enabled a thermal sysfs driver for the temperature sensor
which is connected to the General Purpose ADC. The ADC channel
is read via IIO framework and the channel information is provided
to this driver. This driver reports the temperature by reading ADC
channel and converts it to temperature based on lookup table.
endif
......@@ -35,6 +35,7 @@ obj-y += samsung/
obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o
obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o
obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
......@@ -46,6 +47,7 @@ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/
obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o
obj-$(CONFIG_ST_THERMAL) += st/
obj-$(CONFIG_TEGRA_SOCTHERM) += tegra_soctherm.o
obj-$(CONFIG_TEGRA_SOCTHERM) += tegra/
obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o
......@@ -29,7 +29,13 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
struct thermal_instance *instance;
tz->ops->get_trip_temp(tz, trip, &trip_temp);
tz->ops->get_trip_hyst(tz, trip, &trip_hyst);
if (!tz->ops->get_trip_hyst) {
pr_warn_once("Undefined get_trip_hyst for thermal zone %s - "
"running with default hysteresis zero\n", tz->type);
trip_hyst = 0;
} else
tz->ops->get_trip_hyst(tz, trip, &trip_hyst);
dev_dbg(&tz->device, "Trip%d[temp=%d]:temp=%d:hyst=%d\n",
trip, trip_temp, tz->temperature,
......
......@@ -160,7 +160,7 @@ static int hisi_thermal_get_temp(void *_sensor, int *temp)
struct hisi_thermal_sensor *sensor = _sensor;
struct hisi_thermal_data *data = sensor->thermal;
int sensor_id = 0, i;
int sensor_id = -1, i;
long max_temp = 0;
*temp = hisi_thermal_get_sensor_temp(data, sensor);
......@@ -168,12 +168,19 @@ static int hisi_thermal_get_temp(void *_sensor, int *temp)
sensor->sensor_temp = *temp;
for (i = 0; i < HISI_MAX_SENSORS; i++) {
if (!data->sensors[i].tzd)
continue;
if (data->sensors[i].sensor_temp >= max_temp) {
max_temp = data->sensors[i].sensor_temp;
sensor_id = i;
}
}
/* If no sensor has been enabled, then skip to enable irq */
if (sensor_id == -1)
return 0;
mutex_lock(&data->thermal_lock);
data->irq_bind_sensor = sensor_id;
mutex_unlock(&data->thermal_lock);
......@@ -226,8 +233,12 @@ static irqreturn_t hisi_thermal_alarm_irq_thread(int irq, void *dev)
sensor->thres_temp / 1000);
mutex_unlock(&data->thermal_lock);
for (i = 0; i < HISI_MAX_SENSORS; i++)
for (i = 0; i < HISI_MAX_SENSORS; i++) {
if (!data->sensors[i].tzd)
continue;
thermal_zone_device_update(data->sensors[i].tzd);
}
return IRQ_HANDLED;
}
......@@ -243,10 +254,11 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev,
sensor->id = index;
sensor->thermal = data;
sensor->tzd = thermal_zone_of_sensor_register(&pdev->dev, sensor->id,
sensor, &hisi_of_thermal_ops);
sensor->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev,
sensor->id, sensor, &hisi_of_thermal_ops);
if (IS_ERR(sensor->tzd)) {
ret = PTR_ERR(sensor->tzd);
sensor->tzd = NULL;
dev_err(&pdev->dev, "failed to register sensor id %d: %d\n",
sensor->id, ret);
return ret;
......@@ -331,28 +343,21 @@ static int hisi_thermal_probe(struct platform_device *pdev)
return ret;
}
hisi_thermal_enable_bind_irq_sensor(data);
irq_get_irqchip_state(data->irq, IRQCHIP_STATE_MASKED,
&data->irq_enabled);
for (i = 0; i < HISI_MAX_SENSORS; ++i) {
ret = hisi_thermal_register_sensor(pdev, data,
&data->sensors[i], i);
if (ret) {
if (ret)
dev_err(&pdev->dev,
"failed to register thermal sensor: %d\n", ret);
goto err_get_sensor_data;
}
else
hisi_thermal_toggle_sensor(&data->sensors[i], true);
}
hisi_thermal_enable_bind_irq_sensor(data);
data->irq_enabled = true;
for (i = 0; i < HISI_MAX_SENSORS; i++)
hisi_thermal_toggle_sensor(&data->sensors[i], true);
return 0;
err_get_sensor_data:
clk_disable_unprepare(data->clk);
return ret;
}
static int hisi_thermal_remove(struct platform_device *pdev)
......@@ -363,8 +368,10 @@ static int hisi_thermal_remove(struct platform_device *pdev)
for (i = 0; i < HISI_MAX_SENSORS; i++) {
struct hisi_thermal_sensor *sensor = &data->sensors[i];
if (!sensor->tzd)
continue;
hisi_thermal_toggle_sensor(sensor, false);
thermal_zone_of_sensor_unregister(&pdev->dev, sensor->tzd);
}
hisi_thermal_disable_sensor(data);
......
......@@ -198,49 +198,33 @@ static struct thermal_zone_device_ops proc_thermal_local_ops = {
.get_temp = proc_thermal_get_zone_temp,
};
static int proc_thermal_add(struct device *dev,
struct proc_thermal_device **priv)
static int proc_thermal_read_ppcc(struct proc_thermal_device *proc_priv)
{
struct proc_thermal_device *proc_priv;
struct acpi_device *adev;
int i;
acpi_status status;
struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *elements, *ppcc;
union acpi_object *p;
unsigned long long tmp;
struct thermal_zone_device_ops *ops = NULL;
int i;
int ret;
adev = ACPI_COMPANION(dev);
if (!adev)
return -ENODEV;
int ret = 0;
status = acpi_evaluate_object(adev->handle, "PPCC", NULL, &buf);
status = acpi_evaluate_object(proc_priv->adev->handle, "PPCC",
NULL, &buf);
if (ACPI_FAILURE(status))
return -ENODEV;
p = buf.pointer;
if (!p || (p->type != ACPI_TYPE_PACKAGE)) {
dev_err(dev, "Invalid PPCC data\n");
dev_err(proc_priv->dev, "Invalid PPCC data\n");
ret = -EFAULT;
goto free_buffer;
}
if (!p->package.count) {
dev_err(dev, "Invalid PPCC package size\n");
dev_err(proc_priv->dev, "Invalid PPCC package size\n");
ret = -EFAULT;
goto free_buffer;
}
proc_priv = devm_kzalloc(dev, sizeof(*proc_priv), GFP_KERNEL);
if (!proc_priv) {
ret = -ENOMEM;
goto free_buffer;
}
proc_priv->dev = dev;
proc_priv->adev = adev;
for (i = 0; i < min((int)p->package.count - 1, 2); ++i) {
elements = &(p->package.elements[i+1]);
if (elements->type != ACPI_TYPE_PACKAGE ||
......@@ -257,12 +241,62 @@ static int proc_thermal_add(struct device *dev,
proc_priv->power_limits[i].step_uw = ppcc[5].integer.value;
}
free_buffer:
kfree(buf.pointer);
return ret;
}
#define PROC_POWER_CAPABILITY_CHANGED 0x83
static void proc_thermal_notify(acpi_handle handle, u32 event, void *data)
{
struct proc_thermal_device *proc_priv = data;
if (!proc_priv)
return;
switch (event) {
case PROC_POWER_CAPABILITY_CHANGED:
proc_thermal_read_ppcc(proc_priv);
int340x_thermal_zone_device_update(proc_priv->int340x_zone);
break;
default:
dev_err(proc_priv->dev, "Unsupported event [0x%x]\n", event);
break;
}
}
static int proc_thermal_add(struct device *dev,
struct proc_thermal_device **priv)
{
struct proc_thermal_device *proc_priv;
struct acpi_device *adev;
acpi_status status;
unsigned long long tmp;
struct thermal_zone_device_ops *ops = NULL;
int ret;
adev = ACPI_COMPANION(dev);
if (!adev)
return -ENODEV;
proc_priv = devm_kzalloc(dev, sizeof(*proc_priv), GFP_KERNEL);
if (!proc_priv)
return -ENOMEM;
proc_priv->dev = dev;
proc_priv->adev = adev;
*priv = proc_priv;
ret = sysfs_create_group(&dev->kobj,
&power_limit_attribute_group);
ret = proc_thermal_read_ppcc(proc_priv);
if (!ret) {
ret = sysfs_create_group(&dev->kobj,
&power_limit_attribute_group);
}
if (ret)
goto free_buffer;
return ret;
status = acpi_evaluate_integer(adev->handle, "_TMP", NULL, &tmp);
if (ACPI_FAILURE(status)) {
......@@ -274,20 +308,32 @@ static int proc_thermal_add(struct device *dev,
proc_priv->int340x_zone = int340x_thermal_zone_add(adev, ops);
if (IS_ERR(proc_priv->int340x_zone)) {
sysfs_remove_group(&proc_priv->dev->kobj,
&power_limit_attribute_group);
ret = PTR_ERR(proc_priv->int340x_zone);
goto remove_group;
} else
ret = 0;
free_buffer:
kfree(buf.pointer);
ret = acpi_install_notify_handler(adev->handle, ACPI_DEVICE_NOTIFY,
proc_thermal_notify,
(void *)proc_priv);
if (ret)
goto remove_zone;
return 0;
remove_zone:
int340x_thermal_zone_remove(proc_priv->int340x_zone);
remove_group:
sysfs_remove_group(&proc_priv->dev->kobj,
&power_limit_attribute_group);
return ret;
}
static void proc_thermal_remove(struct proc_thermal_device *proc_priv)
{
acpi_remove_notify_handler(proc_priv->adev->handle,
ACPI_DEVICE_NOTIFY, proc_thermal_notify);
int340x_thermal_zone_remove(proc_priv->int340x_zone);
sysfs_remove_group(&proc_priv->dev->kobj,
&power_limit_attribute_group);
......
......@@ -510,12 +510,6 @@ static int start_power_clamp(void)
unsigned long cpu;
struct task_struct *thread;
/* check if pkg cstate counter is completely 0, abort in this case */
if (!has_pkg_state_counter()) {
pr_err("pkg cstate counter not functional, abort\n");
return -EINVAL;
}
set_target_ratio = clamp(set_target_ratio, 0U, MAX_TARGET_RATIO - 1);
/* prevent cpu hotplug */
get_online_cpus();
......@@ -672,35 +666,11 @@ static struct thermal_cooling_device_ops powerclamp_cooling_ops = {
.set_cur_state = powerclamp_set_cur_state,
};
/* runs on Nehalem and later */
static const struct x86_cpu_id intel_powerclamp_ids[] __initconst = {
{ X86_VENDOR_INTEL, 6, 0x1a},
{ X86_VENDOR_INTEL, 6, 0x1c},
{ X86_VENDOR_INTEL, 6, 0x1e},
{ X86_VENDOR_INTEL, 6, 0x1f},
{ X86_VENDOR_INTEL, 6, 0x25},
{ X86_VENDOR_INTEL, 6, 0x26},
{ X86_VENDOR_INTEL, 6, 0x2a},
{ X86_VENDOR_INTEL, 6, 0x2c},
{ X86_VENDOR_INTEL, 6, 0x2d},
{ X86_VENDOR_INTEL, 6, 0x2e},
{ X86_VENDOR_INTEL, 6, 0x2f},
{ X86_VENDOR_INTEL, 6, 0x37},
{ X86_VENDOR_INTEL, 6, 0x3a},
{ X86_VENDOR_INTEL, 6, 0x3c},
{ X86_VENDOR_INTEL, 6, 0x3d},
{ X86_VENDOR_INTEL, 6, 0x3e},
{ X86_VENDOR_INTEL, 6, 0x3f},
{ X86_VENDOR_INTEL, 6, 0x45},
{ X86_VENDOR_INTEL, 6, 0x46},
{ X86_VENDOR_INTEL, 6, 0x47},
{ X86_VENDOR_INTEL, 6, 0x4c},
{ X86_VENDOR_INTEL, 6, 0x4d},
{ X86_VENDOR_INTEL, 6, 0x4e},
{ X86_VENDOR_INTEL, 6, 0x4f},
{ X86_VENDOR_INTEL, 6, 0x56},
{ X86_VENDOR_INTEL, 6, 0x57},
{ X86_VENDOR_INTEL, 6, 0x5e},
{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_MWAIT },
{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_ARAT },
{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_NONSTOP_TSC },
{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_CONSTANT_TSC},
{}
};
MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids);
......@@ -712,11 +682,12 @@ static int __init powerclamp_probe(void)
boot_cpu_data.x86, boot_cpu_data.x86_model);
return -ENODEV;
}
if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC) ||
!boot_cpu_has(X86_FEATURE_CONSTANT_TSC) ||
!boot_cpu_has(X86_FEATURE_MWAIT) ||
!boot_cpu_has(X86_FEATURE_ARAT))
/* The goal for idle time alignment is to achieve package cstate. */
if (!has_pkg_state_counter()) {
pr_info("No package C-state available");
return -ENODEV;
}
/* find the deepest mwait value */
find_target_mwait();
......
......@@ -144,7 +144,6 @@ struct mtk_thermal {
s32 o_slope;
s32 vts[MT8173_NUM_SENSORS];
struct thermal_zone_device *tzd;
};
struct mtk_thermal_bank_cfg {
......@@ -572,16 +571,11 @@ static int mtk_thermal_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, mt);
mt->tzd = thermal_zone_of_sensor_register(&pdev->dev, 0, mt,
&mtk_thermal_ops);
if (IS_ERR(mt->tzd))
goto err_register;
devm_thermal_zone_of_sensor_register(&pdev->dev, 0, mt,
&mtk_thermal_ops);
return 0;
err_register:
clk_disable_unprepare(mt->clk_peri_therm);
err_disable_clk_auxadc:
clk_disable_unprepare(mt->clk_auxadc);
......@@ -592,8 +586,6 @@ static int mtk_thermal_remove(struct platform_device *pdev)
{
struct mtk_thermal *mt = platform_get_drvdata(pdev);
thermal_zone_of_sensor_unregister(&pdev->dev, mt->tzd);
clk_disable_unprepare(mt->clk_peri_therm);
clk_disable_unprepare(mt->clk_auxadc);
......
......@@ -331,6 +331,14 @@ static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
if (trip >= data->ntrips || trip < 0)
return -EDOM;
if (data->ops->set_trip_temp) {
int ret;
ret = data->ops->set_trip_temp(data->sensor_data, trip, temp);
if (ret)
return ret;
}
/* thermal framework should take care of data->mask & (1 << trip) */
data->trips[trip].temperature = temp;
......@@ -906,7 +914,7 @@ __init *thermal_of_build_thermal_zone(struct device_node *np)
return tz;
free_tbps:
for (i = 0; i < tz->num_tbps; i++)
for (i = i - 1; i >= 0; i--)
of_node_put(tz->tbps[i].cooling_device);
kfree(tz->tbps);
free_trips:
......
......@@ -260,7 +260,7 @@ static int qpnp_tm_probe(struct platform_device *pdev)
if (ret < 0)
goto fail;
chip->tz_dev = thermal_zone_of_sensor_register(&pdev->dev, 0, chip,
chip->tz_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, chip,
&qpnp_tm_sensor_ops);
if (IS_ERR(chip->tz_dev)) {
dev_err(&pdev->dev, "failed to register sensor\n");
......@@ -281,7 +281,6 @@ static int qpnp_tm_remove(struct platform_device *pdev)
{
struct qpnp_tm_chip *chip = dev_get_drvdata(&pdev->dev);
thermal_zone_of_sensor_unregister(&pdev->dev, chip->tz_dev);
if (!IS_ERR(chip->adc))
iio_channel_release(chip->adc);
......
......@@ -492,7 +492,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
goto error_unregister;
if (of_data == USE_OF_THERMAL)
priv->zone = thermal_zone_of_sensor_register(
priv->zone = devm_thermal_zone_of_sensor_register(
dev, i, priv,
&rcar_thermal_zone_of_ops);
else
......
/*
* Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
*
* Copyright (c) 2015, Fuzhou Rockchip Electronics Co., Ltd
* Copyright (c) 2014-2016, Fuzhou Rockchip Electronics Co., Ltd
* Caesar Wang <wxt@rock-chips.com>
*
* This program is free software; you can redistribute it and/or modify it
......@@ -23,8 +21,10 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
#include <linux/thermal.h>
#include <linux/mfd/syscon.h>
#include <linux/pinctrl/consumer.h>
/**
......@@ -73,7 +73,7 @@ enum adc_sort_mode {
#define SOC_MAX_SENSORS 2
/**
* struct chip_tsadc_table: hold information about chip-specific differences
* struct chip_tsadc_table - hold information about chip-specific differences
* @id: conversion table
* @length: size of conversion table
* @data_mask: mask to apply on data inputs
......@@ -86,6 +86,20 @@ struct chip_tsadc_table {
enum adc_sort_mode mode;
};
/**
* struct rockchip_tsadc_chip - hold the private data of tsadc chip
* @chn_id[SOC_MAX_SENSORS]: the sensor id of chip correspond to the channel
* @chn_num: the channel number of tsadc chip
* @tshut_temp: the hardware-controlled shutdown temperature value
* @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
* @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
* @initialize: SoC special initialize tsadc controller method
* @irq_ack: clear the interrupt
* @get_temp: get the temperature
* @set_tshut_temp: set the hardware-controlled shutdown temperature
* @set_tshut_mode: set the hardware-controlled shutdown mode
* @table: the chip-specific conversion table
*/
struct rockchip_tsadc_chip {
/* The sensor id of chip correspond to the ADC channel */
int chn_id[SOC_MAX_SENSORS];
......@@ -97,7 +111,8 @@ struct rockchip_tsadc_chip {
enum tshut_polarity tshut_polarity;
/* Chip-wide methods */
void (*initialize)(void __iomem *reg, enum tshut_polarity p);
void (*initialize)(struct regmap *grf,
void __iomem *reg, enum tshut_polarity p);
void (*irq_ack)(void __iomem *reg);
void (*control)(void __iomem *reg, bool on);
......@@ -112,12 +127,32 @@ struct rockchip_tsadc_chip {
struct chip_tsadc_table table;
};
/**
* struct rockchip_thermal_sensor - hold the information of thermal sensor
* @thermal: pointer to the platform/configuration data
* @tzd: pointer to a thermal zone
* @id: identifier of the thermal sensor
*/
struct rockchip_thermal_sensor {
struct rockchip_thermal_data *thermal;
struct thermal_zone_device *tzd;
int id;
};
/**
* struct rockchip_thermal_data - hold the private data of thermal driver
* @chip: pointer to the platform/configuration data
* @pdev: platform device of thermal
* @reset: the reset controller of tsadc
* @sensors[SOC_MAX_SENSORS]: the thermal sensor
* @clk: the controller clock is divided by the exteral 24MHz
* @pclk: the advanced peripherals bus clock
* @grf: the general register file will be used to do static set by software
* @regs: the base address of tsadc controller
* @tshut_temp: the hardware-controlled shutdown temperature value
* @tshut_mode: the hardware-controlled shutdown mode (0:CRU 1:GPIO)
* @tshut_polarity: the hardware-controlled active polarity (0:LOW 1:HIGH)
*/
struct rockchip_thermal_data {
const struct rockchip_tsadc_chip *chip;
struct platform_device *pdev;
......@@ -128,6 +163,7 @@ struct rockchip_thermal_data {
struct clk *clk;
struct clk *pclk;
struct regmap *grf;
void __iomem *regs;
int tshut_temp;
......@@ -142,6 +178,7 @@ struct rockchip_thermal_data {
* TSADCV3_* are used for newer SoCs than RK3288. (e.g: RK3228, RK3399)
*
*/
#define TSADCV2_USER_CON 0x00
#define TSADCV2_AUTO_CON 0x04
#define TSADCV2_INT_EN 0x08
#define TSADCV2_INT_PD 0x0c
......@@ -155,12 +192,7 @@ struct rockchip_thermal_data {
#define TSADCV2_AUTO_EN BIT(0)
#define TSADCV2_AUTO_SRC_EN(chn) BIT(4 + (chn))
#define TSADCV2_AUTO_TSHUT_POLARITY_HIGH BIT(8)
/**
* TSADCV1_AUTO_Q_SEL_EN:
* whether select (1024 - tsadc_q) as output
* 1'b0:use tsadc_q as output(temperature-code is rising sequence)
* 1'b1:use(1024 - tsadc_q) as output (temperature-code is falling sequence)
*/
#define TSADCV3_AUTO_Q_SEL_EN BIT(1)
#define TSADCV2_INT_SRC_EN(chn) BIT(chn)
......@@ -177,19 +209,32 @@ struct rockchip_thermal_data {
#define TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT 4
#define TSADCV2_AUTO_PERIOD_TIME 250 /* msec */
#define TSADCV2_AUTO_PERIOD_HT_TIME 50 /* msec */
#define TSADCV2_USER_INTER_PD_SOC 0x340 /* 13 clocks */
struct tsadc_table {
u32 code;
int temp;
};
#define GRF_SARADC_TESTBIT 0x0e644
#define GRF_TSADC_TESTBIT_L 0x0e648
#define GRF_TSADC_TESTBIT_H 0x0e64c
#define GRF_TSADC_TSEN_PD_ON (0x30003 << 0)
#define GRF_TSADC_TSEN_PD_OFF (0x30000 << 0)
#define GRF_SARADC_TESTBIT_ON (0x10001 << 2)
#define GRF_TSADC_TESTBIT_H_ON (0x10001 << 2)
/**
* struct tsadc_table - code to temperature conversion table
* @code: the value of adc channel
* @temp: the temperature
* Note:
* Code to Temperature mapping of the Temperature sensor is a piece wise linear
* code to temperature mapping of the temperature sensor is a piece wise linear
* curve.Any temperature, code faling between to 2 give temperatures can be
* linearly interpolated.
* Code to Temperature mapping should be updated based on sillcon results.
* Code to Temperature mapping should be updated based on manufacturer results.
*/
struct tsadc_table {
u32 code;
int temp;
};
static const struct tsadc_table rk3228_code_table[] = {
{0, -40000},
{588, -40000},
......@@ -308,40 +353,40 @@ static const struct tsadc_table rk3368_code_table[] = {
static const struct tsadc_table rk3399_code_table[] = {
{0, -40000},
{593, -40000},
{598, -35000},
{603, -30000},
{609, -25000},
{614, -20000},
{619, -15000},
{625, -10000},
{630, -5000},
{635, 0},
{641, 5000},
{646, 10000},
{651, 15000},
{657, 20000},
{662, 25000},
{667, 30000},
{673, 35000},
{678, 40000},
{684, 45000},
{689, 50000},
{694, 55000},
{700, 60000},
{705, 65000},
{711, 70000},
{716, 75000},
{722, 80000},
{727, 85000},
{733, 90000},
{738, 95000},
{743, 100000},
{749, 105000},
{754, 110000},
{760, 115000},
{765, 120000},
{771, 125000},
{402, -40000},
{410, -35000},
{419, -30000},
{427, -25000},
{436, -20000},
{444, -15000},
{453, -10000},
{461, -5000},
{470, 0},
{478, 5000},
{487, 10000},
{496, 15000},
{504, 20000},
{513, 25000},
{521, 30000},
{530, 35000},
{538, 40000},
{547, 45000},
{555, 50000},
{564, 55000},
{573, 60000},
{581, 65000},
{590, 70000},
{599, 75000},
{607, 80000},
{616, 85000},
{624, 90000},
{633, 95000},
{642, 100000},
{650, 105000},
{659, 110000},
{668, 115000},
{677, 120000},
{685, 125000},
{TSADCV3_DATA_MASK, 125000},
};
......@@ -405,8 +450,8 @@ static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code,
return -EAGAIN; /* Incorrect reading */
while (low <= high) {
if (code >= table.id[mid - 1].code &&
code < table.id[mid].code)
if (code <= table.id[mid].code &&
code > table.id[mid - 1].code)
break;
else if (code > table.id[mid].code)
low = mid + 1;
......@@ -449,7 +494,7 @@ static int rk_tsadcv2_code_to_temp(struct chip_tsadc_table table, u32 code,
* If the temperature is higher than COMP_INT or COMP_SHUT for
* "debounce" times, TSADC controller will generate interrupt or TSHUT.
*/
static void rk_tsadcv2_initialize(void __iomem *regs,
static void rk_tsadcv2_initialize(struct regmap *grf, void __iomem *regs,
enum tshut_polarity tshut_polarity)
{
if (tshut_polarity == TSHUT_HIGH_ACTIVE)
......@@ -466,6 +511,62 @@ static void rk_tsadcv2_initialize(void __iomem *regs,
regs + TSADCV2_AUTO_PERIOD_HT);
writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
if (IS_ERR(grf)) {
pr_warn("%s: Missing rockchip,grf property\n", __func__);
return;
}
}
/**
* rk_tsadcv3_initialize - initialize TASDC Controller.
*
* (1) The tsadc control power sequence.
*
* (2) Set TSADC_V2_AUTO_PERIOD:
* Configure the interleave between every two accessing of
* TSADC in normal operation.
*
* (2) Set TSADCV2_AUTO_PERIOD_HT:
* Configure the interleave between every two accessing of
* TSADC after the temperature is higher than COM_SHUT or COM_INT.
*
* (3) Set TSADCV2_HIGH_INT_DEBOUNCE and TSADC_HIGHT_TSHUT_DEBOUNCE:
* If the temperature is higher than COMP_INT or COMP_SHUT for
* "debounce" times, TSADC controller will generate interrupt or TSHUT.
*/
static void rk_tsadcv3_initialize(struct regmap *grf, void __iomem *regs,
enum tshut_polarity tshut_polarity)
{
/* The tsadc control power sequence */
if (IS_ERR(grf)) {
/* Set interleave value to workround ic time sync issue */
writel_relaxed(TSADCV2_USER_INTER_PD_SOC, regs +
TSADCV2_USER_CON);
} else {
regmap_write(grf, GRF_TSADC_TESTBIT_L, GRF_TSADC_TSEN_PD_ON);
mdelay(10);
regmap_write(grf, GRF_TSADC_TESTBIT_L, GRF_TSADC_TSEN_PD_OFF);
usleep_range(15, 100); /* The spec note says at least 15 us */
regmap_write(grf, GRF_SARADC_TESTBIT, GRF_SARADC_TESTBIT_ON);
regmap_write(grf, GRF_TSADC_TESTBIT_H, GRF_TSADC_TESTBIT_H_ON);
usleep_range(90, 200); /* The spec note says at least 90 us */
}
if (tshut_polarity == TSHUT_HIGH_ACTIVE)
writel_relaxed(0U | TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
regs + TSADCV2_AUTO_CON);
else
writel_relaxed(0U & ~TSADCV2_AUTO_TSHUT_POLARITY_HIGH,
regs + TSADCV2_AUTO_CON);
writel_relaxed(TSADCV2_AUTO_PERIOD_TIME, regs + TSADCV2_AUTO_PERIOD);
writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT,
regs + TSADCV2_HIGHT_INT_DEBOUNCE);
writel_relaxed(TSADCV2_AUTO_PERIOD_HT_TIME,
regs + TSADCV2_AUTO_PERIOD_HT);
writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
}
static void rk_tsadcv2_irq_ack(void __iomem *regs)
......@@ -498,10 +599,11 @@ static void rk_tsadcv2_control(void __iomem *regs, bool enable)
}
/**
* @rk_tsadcv3_control:
* TSADC controller works at auto mode, and some SoCs need set the tsadc_q_sel
* bit on TSADCV2_AUTO_CON[1]. The (1024 - tsadc_q) as output adc value if
* setting this bit to enable.
* rk_tsadcv3_control - the tsadc controller is enabled or disabled.
*
* NOTE: TSADC controller works at auto mode, and some SoCs need set the
* tsadc_q_sel bit on TSADCV2_AUTO_CON[1]. The (1024 - tsadc_q) as output
* adc value if setting this bit to enable.
*/
static void rk_tsadcv3_control(void __iomem *regs, bool enable)
{
......@@ -603,6 +705,30 @@ static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
},
};
static const struct rockchip_tsadc_chip rk3366_tsadc_data = {
.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
.chn_num = 2, /* two channels for tsadc */
.tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
.tshut_temp = 95000,
.initialize = rk_tsadcv3_initialize,
.irq_ack = rk_tsadcv3_irq_ack,
.control = rk_tsadcv3_control,
.get_temp = rk_tsadcv2_get_temp,
.set_tshut_temp = rk_tsadcv2_tshut_temp,
.set_tshut_mode = rk_tsadcv2_tshut_mode,
.table = {
.id = rk3228_code_table,
.length = ARRAY_SIZE(rk3228_code_table),
.data_mask = TSADCV3_DATA_MASK,
.mode = ADC_INCREMENT,
},
};
static const struct rockchip_tsadc_chip rk3368_tsadc_data = {
.chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
.chn_id[SENSOR_GPU] = 1, /* gpu sensor is channel 1 */
......@@ -636,7 +762,7 @@ static const struct rockchip_tsadc_chip rk3399_tsadc_data = {
.tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
.tshut_temp = 95000,
.initialize = rk_tsadcv2_initialize,
.initialize = rk_tsadcv3_initialize,
.irq_ack = rk_tsadcv3_irq_ack,
.control = rk_tsadcv3_control,
.get_temp = rk_tsadcv2_get_temp,
......@@ -660,6 +786,10 @@ static const struct of_device_id of_rockchip_thermal_match[] = {
.compatible = "rockchip,rk3288-tsadc",
.data = (void *)&rk3288_tsadc_data,
},
{
.compatible = "rockchip,rk3366-tsadc",
.data = (void *)&rk3366_tsadc_data,
},
{
.compatible = "rockchip,rk3368-tsadc",
.data = (void *)&rk3368_tsadc_data,
......@@ -768,6 +898,11 @@ static int rockchip_configure_from_dt(struct device *dev,
return -EINVAL;
}
/* The tsadc wont to handle the error in here since some SoCs didn't
* need this property.
*/
thermal->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
return 0;
}
......@@ -786,8 +921,8 @@ rockchip_thermal_register_sensor(struct platform_device *pdev,
sensor->thermal = thermal;
sensor->id = id;
sensor->tzd = thermal_zone_of_sensor_register(&pdev->dev, id, sensor,
&rockchip_of_thermal_ops);
sensor->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, id,
sensor, &rockchip_of_thermal_ops);
if (IS_ERR(sensor->tzd)) {
error = PTR_ERR(sensor->tzd);
dev_err(&pdev->dev, "failed to register sensor %d: %d\n",
......@@ -815,7 +950,7 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
const struct of_device_id *match;
struct resource *res;
int irq;
int i, j;
int i;
int error;
match = of_match_node(of_rockchip_thermal_match, np);
......@@ -888,7 +1023,8 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
goto err_disable_pclk;
}
thermal->chip->initialize(thermal->regs, thermal->tshut_polarity);
thermal->chip->initialize(thermal->grf, thermal->regs,
thermal->tshut_polarity);
for (i = 0; i < thermal->chip->chn_num; i++) {
error = rockchip_thermal_register_sensor(pdev, thermal,
......@@ -898,9 +1034,6 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
dev_err(&pdev->dev,
"failed to register sensor[%d] : error = %d\n",
i, error);
for (j = 0; j < i; j++)
thermal_zone_of_sensor_unregister(&pdev->dev,
thermal->sensors[j].tzd);
goto err_disable_pclk;
}
}
......@@ -912,7 +1045,7 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
if (error) {
dev_err(&pdev->dev,
"failed to request tsadc irq: %d\n", error);
goto err_unregister_sensor;
goto err_disable_pclk;
}
thermal->chip->control(thermal->regs, true);
......@@ -924,11 +1057,6 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
return 0;
err_unregister_sensor:
while (i--)
thermal_zone_of_sensor_unregister(&pdev->dev,
thermal->sensors[i].tzd);
err_disable_pclk:
clk_disable_unprepare(thermal->pclk);
err_disable_clk:
......@@ -946,7 +1074,6 @@ static int rockchip_thermal_remove(struct platform_device *pdev)
struct rockchip_thermal_sensor *sensor = &thermal->sensors[i];
rockchip_thermal_toggle_sensor(sensor, false);
thermal_zone_of_sensor_unregister(&pdev->dev, sensor->tzd);
}
thermal->chip->control(thermal->regs, false);
......@@ -988,12 +1115,15 @@ static int __maybe_unused rockchip_thermal_resume(struct device *dev)
return error;
error = clk_enable(thermal->pclk);
if (error)
if (error) {
clk_disable(thermal->clk);
return error;
}
rockchip_thermal_reset_controller(thermal->reset);
thermal->chip->initialize(thermal->regs, thermal->tshut_polarity);
thermal->chip->initialize(thermal->grf, thermal->regs,
thermal->tshut_polarity);
for (i = 0; i < thermal->chip->chn_num; i++) {
int id = thermal->sensors[i].id;
......
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/thermal.h>
#include <linux/platform_device.h>
/*
* According to a data sheet draft, "this temperature sensor uses a bandgap
* type of circuit to compare a voltage which has a negative temperature
* coefficient with a voltage that is proportional to absolute temperature.
* A resistor bank allows 41 different temperature thresholds to be selected
* and the logic output will then indicate whether the actual die temperature
* lies above or below the selected threshold."
*/
#define TEMPSI_CMD 0
#define TEMPSI_RES 4
#define TEMPSI_CFG 8
#define CMD_OFF 0
#define CMD_ON 1
#define CMD_READ 2
#define IDX_MIN 15
#define IDX_MAX 40
struct tango_thermal_priv {
void __iomem *base;
int thresh_idx;
};
static bool temp_above_thresh(void __iomem *base, int thresh_idx)
{
writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD);
usleep_range(10, 20);
writel(CMD_READ | thresh_idx << 8, base + TEMPSI_CMD);
return readl(base + TEMPSI_RES);
}
static int tango_get_temp(void *arg, int *res)
{
struct tango_thermal_priv *priv = arg;
int idx = priv->thresh_idx;
if (temp_above_thresh(priv->base, idx)) {
/* Search upward by incrementing thresh_idx */
while (idx < IDX_MAX && temp_above_thresh(priv->base, ++idx))
cpu_relax();
idx = idx - 1; /* always return lower bound */
} else {
/* Search downward by decrementing thresh_idx */
while (idx > IDX_MIN && !temp_above_thresh(priv->base, --idx))
cpu_relax();
}
*res = (idx * 9 / 2 - 38) * 1000; /* millidegrees Celsius */
priv->thresh_idx = idx;
return 0;
}
static const struct thermal_zone_of_device_ops ops = {
.get_temp = tango_get_temp,
};
static int tango_thermal_probe(struct platform_device *pdev)
{
struct resource *res;
struct tango_thermal_priv *priv;
struct thermal_zone_device *tzdev;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
priv->thresh_idx = IDX_MIN;
writel(0, priv->base + TEMPSI_CFG);
writel(CMD_ON, priv->base + TEMPSI_CMD);
tzdev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, priv, &ops);
return PTR_ERR_OR_ZERO(tzdev);
}
static const struct of_device_id tango_sensor_ids[] = {
{
.compatible = "sigma,smp8758-thermal",
},
{ /* sentinel */ }
};
static struct platform_driver tango_thermal_driver = {
.probe = tango_thermal_probe,
.driver = {
.name = "tango-thermal",
.of_match_table = tango_sensor_ids,
},
};
module_platform_driver(tango_thermal_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Sigma Designs");
MODULE_DESCRIPTION("Tango temperature sensor");
menu "NVIDIA Tegra thermal drivers"
depends on ARCH_TEGRA
config TEGRA_SOCTHERM
tristate "Tegra SOCTHERM thermal management"
help
Enable this option for integrated thermal management support on NVIDIA
Tegra systems-on-chip. The driver supports four thermal zones
(CPU, GPU, MEM, PLLX). Cooling devices can be bound to the thermal
zones to manage temperatures. This option is also required for the
emergency thermal reset (thermtrip) feature to function.
endmenu
obj-$(CONFIG_TEGRA_SOCTHERM) += tegra-soctherm.o
tegra-soctherm-y := soctherm.o soctherm-fuse.o
tegra-soctherm-$(CONFIG_ARCH_TEGRA_124_SOC) += tegra124-soctherm.o
tegra-soctherm-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-soctherm.o
tegra-soctherm-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-soctherm.o
/*
* Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <soc/tegra/fuse.h>
#include "soctherm.h"
#define NOMINAL_CALIB_FT 105
#define NOMINAL_CALIB_CP 25
#define FUSE_TSENSOR_CALIB_CP_TS_BASE_MASK 0x1fff
#define FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK (0x1fff << 13)
#define FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT 13
#define FUSE_TSENSOR_COMMON 0x180
/*
* Tegra210: Layout of bits in FUSE_TSENSOR_COMMON:
* 3 2 1 0
* 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | BASE_FT | BASE_CP | SHFT_FT | SHIFT_CP |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* Tegra12x, etc:
* In chips prior to Tegra210, this fuse was incorrectly sized as 26 bits,
* and didn't hold SHIFT_CP in [31:26]. Therefore these missing six bits
* were obtained via the FUSE_SPARE_REALIGNMENT_REG register [5:0].
*
* FUSE_TSENSOR_COMMON:
* 3 2 1 0
* 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |-----------| SHFT_FT | BASE_FT | BASE_CP |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* FUSE_SPARE_REALIGNMENT_REG:
* 3 2 1 0
* 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |---------------------------------------------------| SHIFT_CP |
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*/
#define CALIB_COEFFICIENT 1000000LL
/**
* div64_s64_precise() - wrapper for div64_s64()
* @a: the dividend
* @b: the divisor
*
* Implements division with fairly accurate rounding instead of truncation by
* shifting the dividend to the left by 16 so that the quotient has a
* much higher precision.
*
* Return: the quotient of a / b.
*/
static s64 div64_s64_precise(s64 a, s32 b)
{
s64 r, al;
/* Scale up for increased precision division */
al = a << 16;
r = div64_s64(al * 2 + 1, 2 * b);
return r >> 16;
}
int tegra_calc_shared_calib(const struct tegra_soctherm_fuse *tfuse,
struct tsensor_shared_calib *shared)
{
u32 val;
s32 shifted_cp, shifted_ft;
int err;
err = tegra_fuse_readl(FUSE_TSENSOR_COMMON, &val);
if (err)
return err;
shared->base_cp = (val & tfuse->fuse_base_cp_mask) >>
tfuse->fuse_base_cp_shift;
shared->base_ft = (val & tfuse->fuse_base_ft_mask) >>
tfuse->fuse_base_ft_shift;
shifted_ft = (val & tfuse->fuse_shift_ft_mask) >>
tfuse->fuse_shift_ft_shift;
shifted_ft = sign_extend32(shifted_ft, 4);
if (tfuse->fuse_spare_realignment) {
err = tegra_fuse_readl(tfuse->fuse_spare_realignment, &val);
if (err)
return err;
}
shifted_cp = sign_extend32(val, 5);
shared->actual_temp_cp = 2 * NOMINAL_CALIB_CP + shifted_cp;
shared->actual_temp_ft = 2 * NOMINAL_CALIB_FT + shifted_ft;
return 0;
}
int tegra_calc_tsensor_calib(const struct tegra_tsensor *sensor,
const struct tsensor_shared_calib *shared,
u32 *calibration)
{
const struct tegra_tsensor_group *sensor_group;
u32 val, calib;
s32 actual_tsensor_ft, actual_tsensor_cp;
s32 delta_sens, delta_temp;
s32 mult, div;
s16 therma, thermb;
s64 temp;
int err;
sensor_group = sensor->group;
err = tegra_fuse_readl(sensor->calib_fuse_offset, &val);
if (err)
return err;
actual_tsensor_cp = (shared->base_cp * 64) + sign_extend32(val, 12);
val = (val & FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK) >>
FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT;
actual_tsensor_ft = (shared->base_ft * 32) + sign_extend32(val, 12);
delta_sens = actual_tsensor_ft - actual_tsensor_cp;
delta_temp = shared->actual_temp_ft - shared->actual_temp_cp;
mult = sensor_group->pdiv * sensor->config->tsample_ate;
div = sensor->config->tsample * sensor_group->pdiv_ate;
temp = (s64)delta_temp * (1LL << 13) * mult;
therma = div64_s64_precise(temp, (s64)delta_sens * div);
temp = ((s64)actual_tsensor_ft * shared->actual_temp_cp) -
((s64)actual_tsensor_cp * shared->actual_temp_ft);
thermb = div64_s64_precise(temp, delta_sens);
temp = (s64)therma * sensor->fuse_corr_alpha;
therma = div64_s64_precise(temp, CALIB_COEFFICIENT);
temp = (s64)thermb * sensor->fuse_corr_alpha + sensor->fuse_corr_beta;
thermb = div64_s64_precise(temp, CALIB_COEFFICIENT);
calib = ((u16)therma << SENSOR_CONFIG2_THERMA_SHIFT) |
((u16)thermb << SENSOR_CONFIG2_THERMB_SHIFT);
*calibration = calib;
return 0;
}
MODULE_AUTHOR("Wei Ni <wni@nvidia.com>");
MODULE_DESCRIPTION("Tegra SOCTHERM fuse management");
MODULE_LICENSE("GPL v2");
/*
* Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
*
* Author:
* Mikko Perttunen <mperttunen@nvidia.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/debugfs.h>
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/thermal.h>
#include <dt-bindings/thermal/tegra124-soctherm.h>
#include "soctherm.h"
#define SENSOR_CONFIG0 0
#define SENSOR_CONFIG0_STOP BIT(0)
#define SENSOR_CONFIG0_CPTR_OVER BIT(2)
#define SENSOR_CONFIG0_OVER BIT(3)
#define SENSOR_CONFIG0_TCALC_OVER BIT(4)
#define SENSOR_CONFIG0_TALL_MASK (0xfffff << 8)
#define SENSOR_CONFIG0_TALL_SHIFT 8
#define SENSOR_CONFIG1 4
#define SENSOR_CONFIG1_TSAMPLE_MASK 0x3ff
#define SENSOR_CONFIG1_TSAMPLE_SHIFT 0
#define SENSOR_CONFIG1_TIDDQ_EN_MASK (0x3f << 15)
#define SENSOR_CONFIG1_TIDDQ_EN_SHIFT 15
#define SENSOR_CONFIG1_TEN_COUNT_MASK (0x3f << 24)
#define SENSOR_CONFIG1_TEN_COUNT_SHIFT 24
#define SENSOR_CONFIG1_TEMP_ENABLE BIT(31)
/*
* SENSOR_CONFIG2 is defined in soctherm.h
* because, it will be used by tegra_soctherm_fuse.c
*/
#define SENSOR_STATUS0 0xc
#define SENSOR_STATUS0_VALID_MASK BIT(31)
#define SENSOR_STATUS0_CAPTURE_MASK 0xffff
#define SENSOR_STATUS1 0x10
#define SENSOR_STATUS1_TEMP_VALID_MASK BIT(31)
#define SENSOR_STATUS1_TEMP_MASK 0xffff
#define READBACK_VALUE_MASK 0xff00
#define READBACK_VALUE_SHIFT 8
#define READBACK_ADD_HALF BIT(7)
#define READBACK_NEGATE BIT(0)
/* get val from register(r) mask bits(m) */
#define REG_GET_MASK(r, m) (((r) & (m)) >> (ffs(m) - 1))
/* set val(v) to mask bits(m) of register(r) */
#define REG_SET_MASK(r, m, v) (((r) & ~(m)) | \
(((v) & (m >> (ffs(m) - 1))) << (ffs(m) - 1)))
static const int min_low_temp = -127000;
static const int max_high_temp = 127000;
struct tegra_thermctl_zone {
void __iomem *reg;
struct device *dev;
struct thermal_zone_device *tz;
const struct tegra_tsensor_group *sg;
};
struct tegra_soctherm {
struct reset_control *reset;
struct clk *clock_tsensor;
struct clk *clock_soctherm;
void __iomem *regs;
struct thermal_zone_device **thermctl_tzs;
u32 *calib;
struct tegra_soctherm_soc *soc;
struct dentry *debugfs_dir;
};
static void enable_tsensor(struct tegra_soctherm *tegra, unsigned int i)
{
const struct tegra_tsensor *sensor = &tegra->soc->tsensors[i];
void __iomem *base = tegra->regs + sensor->base;
unsigned int val;
val = sensor->config->tall << SENSOR_CONFIG0_TALL_SHIFT;
writel(val, base + SENSOR_CONFIG0);
val = (sensor->config->tsample - 1) << SENSOR_CONFIG1_TSAMPLE_SHIFT;
val |= sensor->config->tiddq_en << SENSOR_CONFIG1_TIDDQ_EN_SHIFT;
val |= sensor->config->ten_count << SENSOR_CONFIG1_TEN_COUNT_SHIFT;
val |= SENSOR_CONFIG1_TEMP_ENABLE;
writel(val, base + SENSOR_CONFIG1);
writel(tegra->calib[i], base + SENSOR_CONFIG2);
}
/*
* Translate from soctherm readback format to millicelsius.
* The soctherm readback format in bits is as follows:
* TTTTTTTT H______N
* where T's contain the temperature in Celsius,
* H denotes an addition of 0.5 Celsius and N denotes negation
* of the final value.
*/
static int translate_temp(u16 val)
{
int t;
t = ((val & READBACK_VALUE_MASK) >> READBACK_VALUE_SHIFT) * 1000;
if (val & READBACK_ADD_HALF)
t += 500;
if (val & READBACK_NEGATE)
t *= -1;
return t;
}
static int tegra_thermctl_get_temp(void *data, int *out_temp)
{
struct tegra_thermctl_zone *zone = data;
u32 val;
val = readl(zone->reg);
val = REG_GET_MASK(val, zone->sg->sensor_temp_mask);
*out_temp = translate_temp(val);
return 0;
}
static int
thermtrip_program(struct device *dev, const struct tegra_tsensor_group *sg,
int trip_temp);
static int tegra_thermctl_set_trip_temp(void *data, int trip, int temp)
{
struct tegra_thermctl_zone *zone = data;
struct thermal_zone_device *tz = zone->tz;
const struct tegra_tsensor_group *sg = zone->sg;
struct device *dev = zone->dev;
enum thermal_trip_type type;
int ret;
if (!tz)
return -EINVAL;
ret = tz->ops->get_trip_type(tz, trip, &type);
if (ret)
return ret;
if (type != THERMAL_TRIP_CRITICAL)
return 0;
return thermtrip_program(dev, sg, temp);
}
static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = {
.get_temp = tegra_thermctl_get_temp,
.set_trip_temp = tegra_thermctl_set_trip_temp,
};
/**
* enforce_temp_range() - check and enforce temperature range [min, max]
* @trip_temp: the trip temperature to check
*
* Checks and enforces the permitted temperature range that SOC_THERM
* HW can support This is
* done while taking care of precision.
*
* Return: The precision adjusted capped temperature in millicelsius.
*/
static int enforce_temp_range(struct device *dev, int trip_temp)
{
int temp;
temp = clamp_val(trip_temp, min_low_temp, max_high_temp);
if (temp != trip_temp)
dev_info(dev, "soctherm: trip temperature %d forced to %d\n",
trip_temp, temp);
return temp;
}
/**
* thermtrip_program() - Configures the hardware to shut down the
* system if a given sensor group reaches a given temperature
* @dev: ptr to the struct device for the SOC_THERM IP block
* @sg: pointer to the sensor group to set the thermtrip temperature for
* @trip_temp: the temperature in millicelsius to trigger the thermal trip at
*
* Sets the thermal trip threshold of the given sensor group to be the
* @trip_temp. If this threshold is crossed, the hardware will shut
* down.
*
* Note that, although @trip_temp is specified in millicelsius, the
* hardware is programmed in degrees Celsius.
*
* Return: 0 upon success, or %-EINVAL upon failure.
*/
static int thermtrip_program(struct device *dev,
const struct tegra_tsensor_group *sg,
int trip_temp)
{
struct tegra_soctherm *ts = dev_get_drvdata(dev);
int temp;
u32 r;
if (!sg || !sg->thermtrip_threshold_mask)
return -EINVAL;
temp = enforce_temp_range(dev, trip_temp) / ts->soc->thresh_grain;
r = readl(ts->regs + THERMCTL_THERMTRIP_CTL);
r = REG_SET_MASK(r, sg->thermtrip_threshold_mask, temp);
r = REG_SET_MASK(r, sg->thermtrip_enable_mask, 1);
r = REG_SET_MASK(r, sg->thermtrip_any_en_mask, 0);
writel(r, ts->regs + THERMCTL_THERMTRIP_CTL);
return 0;
}
/**
* tegra_soctherm_set_hwtrips() - set HW trip point from DT data
* @dev: struct device * of the SOC_THERM instance
*
* Configure the SOC_THERM HW trip points, setting "THERMTRIP"
* trip points , using "critical" type trip_temp from thermal
* zone.
* After they have been configured, THERMTRIP will take action
* when the configured SoC thermal sensor group reaches a
* certain temperature.
*
* Return: 0 upon success, or a negative error code on failure.
* "Success" does not mean that trips was enabled; it could also
* mean that no node was found in DT.
* THERMTRIP has been enabled successfully when a message similar to
* this one appears on the serial console:
* "thermtrip: will shut down when sensor group XXX reaches YYYYYY mC"
*/
static int tegra_soctherm_set_hwtrips(struct device *dev,
const struct tegra_tsensor_group *sg,
struct thermal_zone_device *tz)
{
int temperature;
int ret;
ret = tz->ops->get_crit_temp(tz, &temperature);
if (ret) {
dev_warn(dev, "thermtrip: %s: missing critical temperature\n",
sg->name);
return ret;
}
ret = thermtrip_program(dev, sg, temperature);
if (ret) {
dev_err(dev, "thermtrip: %s: error during enable\n",
sg->name);
return ret;
}
dev_info(dev,
"thermtrip: will shut down when %s reaches %d mC\n",
sg->name, temperature);
return 0;
}
#ifdef CONFIG_DEBUG_FS
static int regs_show(struct seq_file *s, void *data)
{
struct platform_device *pdev = s->private;
struct tegra_soctherm *ts = platform_get_drvdata(pdev);
const struct tegra_tsensor *tsensors = ts->soc->tsensors;
const struct tegra_tsensor_group **ttgs = ts->soc->ttgs;
u32 r, state;
int i;
seq_puts(s, "-----TSENSE (convert HW)-----\n");
for (i = 0; i < ts->soc->num_tsensors; i++) {
r = readl(ts->regs + tsensors[i].base + SENSOR_CONFIG1);
state = REG_GET_MASK(r, SENSOR_CONFIG1_TEMP_ENABLE);
seq_printf(s, "%s: ", tsensors[i].name);
seq_printf(s, "En(%d) ", state);
if (!state) {
seq_puts(s, "\n");
continue;
}
state = REG_GET_MASK(r, SENSOR_CONFIG1_TIDDQ_EN_MASK);
seq_printf(s, "tiddq(%d) ", state);
state = REG_GET_MASK(r, SENSOR_CONFIG1_TEN_COUNT_MASK);
seq_printf(s, "ten_count(%d) ", state);
state = REG_GET_MASK(r, SENSOR_CONFIG1_TSAMPLE_MASK);
seq_printf(s, "tsample(%d) ", state + 1);
r = readl(ts->regs + tsensors[i].base + SENSOR_STATUS1);
state = REG_GET_MASK(r, SENSOR_STATUS1_TEMP_VALID_MASK);
seq_printf(s, "Temp(%d/", state);
state = REG_GET_MASK(r, SENSOR_STATUS1_TEMP_MASK);
seq_printf(s, "%d) ", translate_temp(state));
r = readl(ts->regs + tsensors[i].base + SENSOR_STATUS0);
state = REG_GET_MASK(r, SENSOR_STATUS0_VALID_MASK);
seq_printf(s, "Capture(%d/", state);
state = REG_GET_MASK(r, SENSOR_STATUS0_CAPTURE_MASK);
seq_printf(s, "%d) ", state);
r = readl(ts->regs + tsensors[i].base + SENSOR_CONFIG0);
state = REG_GET_MASK(r, SENSOR_CONFIG0_STOP);
seq_printf(s, "Stop(%d) ", state);
state = REG_GET_MASK(r, SENSOR_CONFIG0_TALL_MASK);
seq_printf(s, "Tall(%d) ", state);
state = REG_GET_MASK(r, SENSOR_CONFIG0_TCALC_OVER);
seq_printf(s, "Over(%d/", state);
state = REG_GET_MASK(r, SENSOR_CONFIG0_OVER);
seq_printf(s, "%d/", state);
state = REG_GET_MASK(r, SENSOR_CONFIG0_CPTR_OVER);
seq_printf(s, "%d) ", state);
r = readl(ts->regs + tsensors[i].base + SENSOR_CONFIG2);
state = REG_GET_MASK(r, SENSOR_CONFIG2_THERMA_MASK);
seq_printf(s, "Therm_A/B(%d/", state);
state = REG_GET_MASK(r, SENSOR_CONFIG2_THERMB_MASK);
seq_printf(s, "%d)\n", (s16)state);
}
r = readl(ts->regs + SENSOR_PDIV);
seq_printf(s, "PDIV: 0x%x\n", r);
r = readl(ts->regs + SENSOR_HOTSPOT_OFF);
seq_printf(s, "HOTSPOT: 0x%x\n", r);
seq_puts(s, "\n");
seq_puts(s, "-----SOC_THERM-----\n");
r = readl(ts->regs + SENSOR_TEMP1);
state = REG_GET_MASK(r, SENSOR_TEMP1_CPU_TEMP_MASK);
seq_printf(s, "Temperatures: CPU(%d) ", translate_temp(state));
state = REG_GET_MASK(r, SENSOR_TEMP1_GPU_TEMP_MASK);
seq_printf(s, " GPU(%d) ", translate_temp(state));
r = readl(ts->regs + SENSOR_TEMP2);
state = REG_GET_MASK(r, SENSOR_TEMP2_PLLX_TEMP_MASK);
seq_printf(s, " PLLX(%d) ", translate_temp(state));
state = REG_GET_MASK(r, SENSOR_TEMP2_MEM_TEMP_MASK);
seq_printf(s, " MEM(%d)\n", translate_temp(state));
r = readl(ts->regs + THERMCTL_THERMTRIP_CTL);
state = REG_GET_MASK(r, ttgs[0]->thermtrip_any_en_mask);
seq_printf(s, "Thermtrip Any En(%d)\n", state);
for (i = 0; i < ts->soc->num_ttgs; i++) {
state = REG_GET_MASK(r, ttgs[i]->thermtrip_enable_mask);
seq_printf(s, " %s En(%d) ", ttgs[i]->name, state);
state = REG_GET_MASK(r, ttgs[i]->thermtrip_threshold_mask);
state *= ts->soc->thresh_grain;
seq_printf(s, "Thresh(%d)\n", state);
}
return 0;
}
static int regs_open(struct inode *inode, struct file *file)
{
return single_open(file, regs_show, inode->i_private);
}
static const struct file_operations regs_fops = {
.open = regs_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static void soctherm_debug_init(struct platform_device *pdev)
{
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
struct dentry *root, *file;
root = debugfs_create_dir("soctherm", NULL);
if (!root) {
dev_err(&pdev->dev, "failed to create debugfs directory\n");
return;
}
tegra->debugfs_dir = root;
file = debugfs_create_file("reg_contents", 0644, root,
pdev, &regs_fops);
if (!file) {
dev_err(&pdev->dev, "failed to create debugfs file\n");
debugfs_remove_recursive(tegra->debugfs_dir);
tegra->debugfs_dir = NULL;
}
}
#else
static inline void soctherm_debug_init(struct platform_device *pdev) {}
#endif
static int soctherm_clk_enable(struct platform_device *pdev, bool enable)
{
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
int err;
if (!tegra->clock_soctherm || !tegra->clock_tsensor)
return -EINVAL;
reset_control_assert(tegra->reset);
if (enable) {
err = clk_prepare_enable(tegra->clock_soctherm);
if (err) {
reset_control_deassert(tegra->reset);
return err;
}
err = clk_prepare_enable(tegra->clock_tsensor);
if (err) {
clk_disable_unprepare(tegra->clock_soctherm);
reset_control_deassert(tegra->reset);
return err;
}
} else {
clk_disable_unprepare(tegra->clock_tsensor);
clk_disable_unprepare(tegra->clock_soctherm);
}
reset_control_deassert(tegra->reset);
return 0;
}
static void soctherm_init(struct platform_device *pdev)
{
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
const struct tegra_tsensor_group **ttgs = tegra->soc->ttgs;
int i;
u32 pdiv, hotspot;
/* Initialize raw sensors */
for (i = 0; i < tegra->soc->num_tsensors; ++i)
enable_tsensor(tegra, i);
/* program pdiv and hotspot offsets per THERM */
pdiv = readl(tegra->regs + SENSOR_PDIV);
hotspot = readl(tegra->regs + SENSOR_HOTSPOT_OFF);
for (i = 0; i < tegra->soc->num_ttgs; ++i) {
pdiv = REG_SET_MASK(pdiv, ttgs[i]->pdiv_mask,
ttgs[i]->pdiv);
/* hotspot offset from PLLX, doesn't need to configure PLLX */
if (ttgs[i]->id == TEGRA124_SOCTHERM_SENSOR_PLLX)
continue;
hotspot = REG_SET_MASK(hotspot,
ttgs[i]->pllx_hotspot_mask,
ttgs[i]->pllx_hotspot_diff);
}
writel(pdiv, tegra->regs + SENSOR_PDIV);
writel(hotspot, tegra->regs + SENSOR_HOTSPOT_OFF);
}
static const struct of_device_id tegra_soctherm_of_match[] = {
#ifdef CONFIG_ARCH_TEGRA_124_SOC
{
.compatible = "nvidia,tegra124-soctherm",
.data = &tegra124_soctherm,
},
#endif
#ifdef CONFIG_ARCH_TEGRA_132_SOC
{
.compatible = "nvidia,tegra132-soctherm",
.data = &tegra132_soctherm,
},
#endif
#ifdef CONFIG_ARCH_TEGRA_210_SOC
{
.compatible = "nvidia,tegra210-soctherm",
.data = &tegra210_soctherm,
},
#endif
{ },
};
MODULE_DEVICE_TABLE(of, tegra_soctherm_of_match);
static int tegra_soctherm_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
struct tegra_soctherm *tegra;
struct thermal_zone_device *z;
struct tsensor_shared_calib shared_calib;
struct resource *res;
struct tegra_soctherm_soc *soc;
unsigned int i;
int err;
match = of_match_node(tegra_soctherm_of_match, pdev->dev.of_node);
if (!match)
return -ENODEV;
soc = (struct tegra_soctherm_soc *)match->data;
if (soc->num_ttgs > TEGRA124_SOCTHERM_SENSOR_NUM)
return -EINVAL;
tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
if (!tegra)
return -ENOMEM;
dev_set_drvdata(&pdev->dev, tegra);
tegra->soc = soc;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
tegra->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(tegra->regs))
return PTR_ERR(tegra->regs);
tegra->reset = devm_reset_control_get(&pdev->dev, "soctherm");
if (IS_ERR(tegra->reset)) {
dev_err(&pdev->dev, "can't get soctherm reset\n");
return PTR_ERR(tegra->reset);
}
tegra->clock_tsensor = devm_clk_get(&pdev->dev, "tsensor");
if (IS_ERR(tegra->clock_tsensor)) {
dev_err(&pdev->dev, "can't get tsensor clock\n");
return PTR_ERR(tegra->clock_tsensor);
}
tegra->clock_soctherm = devm_clk_get(&pdev->dev, "soctherm");
if (IS_ERR(tegra->clock_soctherm)) {
dev_err(&pdev->dev, "can't get soctherm clock\n");
return PTR_ERR(tegra->clock_soctherm);
}
tegra->calib = devm_kzalloc(&pdev->dev,
sizeof(u32) * soc->num_tsensors,
GFP_KERNEL);
if (!tegra->calib)
return -ENOMEM;
/* calculate shared calibration data */
err = tegra_calc_shared_calib(soc->tfuse, &shared_calib);
if (err)
return err;
/* calculate tsensor calibaration data */
for (i = 0; i < soc->num_tsensors; ++i) {
err = tegra_calc_tsensor_calib(&soc->tsensors[i],
&shared_calib,
&tegra->calib[i]);
if (err)
return err;
}
tegra->thermctl_tzs = devm_kzalloc(&pdev->dev,
sizeof(*z) * soc->num_ttgs,
GFP_KERNEL);
if (!tegra->thermctl_tzs)
return -ENOMEM;
err = soctherm_clk_enable(pdev, true);
if (err)
return err;
soctherm_init(pdev);
for (i = 0; i < soc->num_ttgs; ++i) {
struct tegra_thermctl_zone *zone =
devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
if (!zone) {
err = -ENOMEM;
goto disable_clocks;
}
zone->reg = tegra->regs + soc->ttgs[i]->sensor_temp_offset;
zone->dev = &pdev->dev;
zone->sg = soc->ttgs[i];
z = devm_thermal_zone_of_sensor_register(&pdev->dev,
soc->ttgs[i]->id, zone,
&tegra_of_thermal_ops);
if (IS_ERR(z)) {
err = PTR_ERR(z);
dev_err(&pdev->dev, "failed to register sensor: %d\n",
err);
goto disable_clocks;
}
zone->tz = z;
tegra->thermctl_tzs[soc->ttgs[i]->id] = z;
/* Configure hw trip points */
tegra_soctherm_set_hwtrips(&pdev->dev, soc->ttgs[i], z);
}
soctherm_debug_init(pdev);
return 0;
disable_clocks:
soctherm_clk_enable(pdev, false);
return err;
}
static int tegra_soctherm_remove(struct platform_device *pdev)
{
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
debugfs_remove_recursive(tegra->debugfs_dir);
soctherm_clk_enable(pdev, false);
return 0;
}
static int __maybe_unused soctherm_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
soctherm_clk_enable(pdev, false);
return 0;
}
static int __maybe_unused soctherm_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
struct tegra_soctherm_soc *soc = tegra->soc;
int err, i;
err = soctherm_clk_enable(pdev, true);
if (err) {
dev_err(&pdev->dev,
"Resume failed: enable clocks failed\n");
return err;
}
soctherm_init(pdev);
for (i = 0; i < soc->num_ttgs; ++i) {
struct thermal_zone_device *tz;
tz = tegra->thermctl_tzs[soc->ttgs[i]->id];
tegra_soctherm_set_hwtrips(dev, soc->ttgs[i], tz);
}
return 0;
}
static SIMPLE_DEV_PM_OPS(tegra_soctherm_pm, soctherm_suspend, soctherm_resume);
static struct platform_driver tegra_soctherm_driver = {
.probe = tegra_soctherm_probe,
.remove = tegra_soctherm_remove,
.driver = {
.name = "tegra_soctherm",
.pm = &tegra_soctherm_pm,
.of_match_table = tegra_soctherm_of_match,
},
};
module_platform_driver(tegra_soctherm_driver);
MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
MODULE_DESCRIPTION("NVIDIA Tegra SOCTHERM thermal management driver");
MODULE_LICENSE("GPL v2");
/*
* Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __DRIVERS_THERMAL_TEGRA_SOCTHERM_H
#define __DRIVERS_THERMAL_TEGRA_SOCTHERM_H
#define SENSOR_CONFIG2 8
#define SENSOR_CONFIG2_THERMA_MASK (0xffff << 16)
#define SENSOR_CONFIG2_THERMA_SHIFT 16
#define SENSOR_CONFIG2_THERMB_MASK 0xffff
#define SENSOR_CONFIG2_THERMB_SHIFT 0
#define THERMCTL_THERMTRIP_CTL 0x80
/* BITs are defined in device file */
#define SENSOR_PDIV 0x1c0
#define SENSOR_PDIV_CPU_MASK (0xf << 12)
#define SENSOR_PDIV_GPU_MASK (0xf << 8)
#define SENSOR_PDIV_MEM_MASK (0xf << 4)
#define SENSOR_PDIV_PLLX_MASK (0xf << 0)
#define SENSOR_HOTSPOT_OFF 0x1c4
#define SENSOR_HOTSPOT_CPU_MASK (0xff << 16)
#define SENSOR_HOTSPOT_GPU_MASK (0xff << 8)
#define SENSOR_HOTSPOT_MEM_MASK (0xff << 0)
#define SENSOR_TEMP1 0x1c8
#define SENSOR_TEMP1_CPU_TEMP_MASK (0xffff << 16)
#define SENSOR_TEMP1_GPU_TEMP_MASK 0xffff
#define SENSOR_TEMP2 0x1cc
#define SENSOR_TEMP2_MEM_TEMP_MASK (0xffff << 16)
#define SENSOR_TEMP2_PLLX_TEMP_MASK 0xffff
/**
* struct tegra_tsensor_group - SOC_THERM sensor group data
* @name: short name of the temperature sensor group
* @id: numeric ID of the temperature sensor group
* @sensor_temp_offset: offset of the SENSOR_TEMP* register
* @sensor_temp_mask: bit mask for this sensor group in SENSOR_TEMP* register
* @pdiv: the sensor count post-divider to use during runtime
* @pdiv_ate: the sensor count post-divider used during automated test
* @pdiv_mask: register bitfield mask for the PDIV field for this sensor
* @pllx_hotspot_diff: hotspot offset from the PLLX sensor, must be 0 for
PLLX sensor group
* @pllx_hotspot_mask: register bitfield mask for the HOTSPOT field
*/
struct tegra_tsensor_group {
const char *name;
u8 id;
u16 sensor_temp_offset;
u32 sensor_temp_mask;
u32 pdiv, pdiv_ate, pdiv_mask;
u32 pllx_hotspot_diff, pllx_hotspot_mask;
u32 thermtrip_enable_mask;
u32 thermtrip_any_en_mask;
u32 thermtrip_threshold_mask;
};
struct tegra_tsensor_configuration {
u32 tall, tiddq_en, ten_count, pdiv, pdiv_ate, tsample, tsample_ate;
};
struct tegra_tsensor {
const char *name;
const u32 base;
const struct tegra_tsensor_configuration *config;
const u32 calib_fuse_offset;
/*
* Correction values used to modify values read from
* calibration fuses
*/
const s32 fuse_corr_alpha, fuse_corr_beta;
const struct tegra_tsensor_group *group;
};
struct tegra_soctherm_fuse {
u32 fuse_base_cp_mask, fuse_base_cp_shift;
u32 fuse_base_ft_mask, fuse_base_ft_shift;
u32 fuse_shift_ft_mask, fuse_shift_ft_shift;
u32 fuse_spare_realignment;
};
struct tsensor_shared_calib {
u32 base_cp, base_ft;
u32 actual_temp_cp, actual_temp_ft;
};
struct tegra_soctherm_soc {
const struct tegra_tsensor *tsensors;
const unsigned int num_tsensors;
const struct tegra_tsensor_group **ttgs;
const unsigned int num_ttgs;
const struct tegra_soctherm_fuse *tfuse;
const int thresh_grain;
};
int tegra_calc_shared_calib(const struct tegra_soctherm_fuse *tfuse,
struct tsensor_shared_calib *shared);
int tegra_calc_tsensor_calib(const struct tegra_tsensor *sensor,
const struct tsensor_shared_calib *shared,
u32 *calib);
#ifdef CONFIG_ARCH_TEGRA_124_SOC
extern const struct tegra_soctherm_soc tegra124_soctherm;
#endif
#ifdef CONFIG_ARCH_TEGRA_132_SOC
extern const struct tegra_soctherm_soc tegra132_soctherm;
#endif
#ifdef CONFIG_ARCH_TEGRA_210_SOC
extern const struct tegra_soctherm_soc tegra210_soctherm;
#endif
#endif
/*
* Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <dt-bindings/thermal/tegra124-soctherm.h>
#include "soctherm.h"
#define TEGRA124_THERMTRIP_ANY_EN_MASK (0x1 << 28)
#define TEGRA124_THERMTRIP_MEM_EN_MASK (0x1 << 27)
#define TEGRA124_THERMTRIP_GPU_EN_MASK (0x1 << 26)
#define TEGRA124_THERMTRIP_CPU_EN_MASK (0x1 << 25)
#define TEGRA124_THERMTRIP_TSENSE_EN_MASK (0x1 << 24)
#define TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK (0xff << 16)
#define TEGRA124_THERMTRIP_CPU_THRESH_MASK (0xff << 8)
#define TEGRA124_THERMTRIP_TSENSE_THRESH_MASK 0xff
#define TEGRA124_THRESH_GRAIN 1000
static const struct tegra_tsensor_configuration tegra124_tsensor_config = {
.tall = 16300,
.tiddq_en = 1,
.ten_count = 1,
.tsample = 120,
.tsample_ate = 480,
};
static const struct tegra_tsensor_group tegra124_tsensor_group_cpu = {
.id = TEGRA124_SOCTHERM_SENSOR_CPU,
.name = "cpu",
.sensor_temp_offset = SENSOR_TEMP1,
.sensor_temp_mask = SENSOR_TEMP1_CPU_TEMP_MASK,
.pdiv = 8,
.pdiv_ate = 8,
.pdiv_mask = SENSOR_PDIV_CPU_MASK,
.pllx_hotspot_diff = 10,
.pllx_hotspot_mask = SENSOR_HOTSPOT_CPU_MASK,
.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA124_THERMTRIP_CPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA124_THERMTRIP_CPU_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra124_tsensor_group_gpu = {
.id = TEGRA124_SOCTHERM_SENSOR_GPU,
.name = "gpu",
.sensor_temp_offset = SENSOR_TEMP1,
.sensor_temp_mask = SENSOR_TEMP1_GPU_TEMP_MASK,
.pdiv = 8,
.pdiv_ate = 8,
.pdiv_mask = SENSOR_PDIV_GPU_MASK,
.pllx_hotspot_diff = 5,
.pllx_hotspot_mask = SENSOR_HOTSPOT_GPU_MASK,
.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA124_THERMTRIP_GPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra124_tsensor_group_pll = {
.id = TEGRA124_SOCTHERM_SENSOR_PLLX,
.name = "pll",
.sensor_temp_offset = SENSOR_TEMP2,
.sensor_temp_mask = SENSOR_TEMP2_PLLX_TEMP_MASK,
.pdiv = 8,
.pdiv_ate = 8,
.pdiv_mask = SENSOR_PDIV_PLLX_MASK,
.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA124_THERMTRIP_TSENSE_EN_MASK,
.thermtrip_threshold_mask = TEGRA124_THERMTRIP_TSENSE_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra124_tsensor_group_mem = {
.id = TEGRA124_SOCTHERM_SENSOR_MEM,
.name = "mem",
.sensor_temp_offset = SENSOR_TEMP2,
.sensor_temp_mask = SENSOR_TEMP2_MEM_TEMP_MASK,
.pdiv = 8,
.pdiv_ate = 8,
.pdiv_mask = SENSOR_PDIV_MEM_MASK,
.pllx_hotspot_diff = 0,
.pllx_hotspot_mask = SENSOR_HOTSPOT_MEM_MASK,
.thermtrip_any_en_mask = TEGRA124_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA124_THERMTRIP_MEM_EN_MASK,
.thermtrip_threshold_mask = TEGRA124_THERMTRIP_GPUMEM_THRESH_MASK,
};
static const struct tegra_tsensor_group *tegra124_tsensor_groups[] = {
&tegra124_tsensor_group_cpu,
&tegra124_tsensor_group_gpu,
&tegra124_tsensor_group_pll,
&tegra124_tsensor_group_mem,
};
static const struct tegra_tsensor tegra124_tsensors[] = {
{
.name = "cpu0",
.base = 0xc0,
.config = &tegra124_tsensor_config,
.calib_fuse_offset = 0x098,
.fuse_corr_alpha = 1135400,
.fuse_corr_beta = -6266900,
.group = &tegra124_tsensor_group_cpu,
}, {
.name = "cpu1",
.base = 0xe0,
.config = &tegra124_tsensor_config,
.calib_fuse_offset = 0x084,
.fuse_corr_alpha = 1122220,
.fuse_corr_beta = -5700700,
.group = &tegra124_tsensor_group_cpu,
}, {
.name = "cpu2",
.base = 0x100,
.config = &tegra124_tsensor_config,
.calib_fuse_offset = 0x088,
.fuse_corr_alpha = 1127000,
.fuse_corr_beta = -6768200,
.group = &tegra124_tsensor_group_cpu,
}, {
.name = "cpu3",
.base = 0x120,
.config = &tegra124_tsensor_config,
.calib_fuse_offset = 0x12c,
.fuse_corr_alpha = 1110900,
.fuse_corr_beta = -6232000,
.group = &tegra124_tsensor_group_cpu,
}, {
.name = "mem0",
.base = 0x140,
.config = &tegra124_tsensor_config,
.calib_fuse_offset = 0x158,
.fuse_corr_alpha = 1122300,
.fuse_corr_beta = -5936400,
.group = &tegra124_tsensor_group_mem,
}, {
.name = "mem1",
.base = 0x160,
.config = &tegra124_tsensor_config,
.calib_fuse_offset = 0x15c,
.fuse_corr_alpha = 1145700,
.fuse_corr_beta = -7124600,
.group = &tegra124_tsensor_group_mem,
}, {
.name = "gpu",
.base = 0x180,
.config = &tegra124_tsensor_config,
.calib_fuse_offset = 0x154,
.fuse_corr_alpha = 1120100,
.fuse_corr_beta = -6000500,
.group = &tegra124_tsensor_group_gpu,
}, {
.name = "pllx",
.base = 0x1a0,
.config = &tegra124_tsensor_config,
.calib_fuse_offset = 0x160,
.fuse_corr_alpha = 1106500,
.fuse_corr_beta = -6729300,
.group = &tegra124_tsensor_group_pll,
},
};
/*
* Mask/shift bits in FUSE_TSENSOR_COMMON and
* FUSE_TSENSOR_COMMON, which are described in
* tegra_soctherm_fuse.c
*/
static const struct tegra_soctherm_fuse tegra124_soctherm_fuse = {
.fuse_base_cp_mask = 0x3ff,
.fuse_base_cp_shift = 0,
.fuse_base_ft_mask = 0x7ff << 10,
.fuse_base_ft_shift = 10,
.fuse_shift_ft_mask = 0x1f << 21,
.fuse_shift_ft_shift = 21,
.fuse_spare_realignment = 0x1fc,
};
const struct tegra_soctherm_soc tegra124_soctherm = {
.tsensors = tegra124_tsensors,
.num_tsensors = ARRAY_SIZE(tegra124_tsensors),
.ttgs = tegra124_tsensor_groups,
.num_ttgs = ARRAY_SIZE(tegra124_tsensor_groups),
.tfuse = &tegra124_soctherm_fuse,
.thresh_grain = TEGRA124_THRESH_GRAIN,
};
/*
* Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <dt-bindings/thermal/tegra124-soctherm.h>
#include "soctherm.h"
#define TEGRA132_THERMTRIP_ANY_EN_MASK (0x1 << 28)
#define TEGRA132_THERMTRIP_MEM_EN_MASK (0x1 << 27)
#define TEGRA132_THERMTRIP_GPU_EN_MASK (0x1 << 26)
#define TEGRA132_THERMTRIP_CPU_EN_MASK (0x1 << 25)
#define TEGRA132_THERMTRIP_TSENSE_EN_MASK (0x1 << 24)
#define TEGRA132_THERMTRIP_GPUMEM_THRESH_MASK (0xff << 16)
#define TEGRA132_THERMTRIP_CPU_THRESH_MASK (0xff << 8)
#define TEGRA132_THERMTRIP_TSENSE_THRESH_MASK 0xff
#define TEGRA132_THRESH_GRAIN 1000
static const struct tegra_tsensor_configuration tegra132_tsensor_config = {
.tall = 16300,
.tiddq_en = 1,
.ten_count = 1,
.tsample = 120,
.tsample_ate = 480,
};
static const struct tegra_tsensor_group tegra132_tsensor_group_cpu = {
.id = TEGRA124_SOCTHERM_SENSOR_CPU,
.name = "cpu",
.sensor_temp_offset = SENSOR_TEMP1,
.sensor_temp_mask = SENSOR_TEMP1_CPU_TEMP_MASK,
.pdiv = 8,
.pdiv_ate = 8,
.pdiv_mask = SENSOR_PDIV_CPU_MASK,
.pllx_hotspot_diff = 10,
.pllx_hotspot_mask = SENSOR_HOTSPOT_CPU_MASK,
.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA132_THERMTRIP_CPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA132_THERMTRIP_CPU_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra132_tsensor_group_gpu = {
.id = TEGRA124_SOCTHERM_SENSOR_GPU,
.name = "gpu",
.sensor_temp_offset = SENSOR_TEMP1,
.sensor_temp_mask = SENSOR_TEMP1_GPU_TEMP_MASK,
.pdiv = 8,
.pdiv_ate = 8,
.pdiv_mask = SENSOR_PDIV_GPU_MASK,
.pllx_hotspot_diff = 5,
.pllx_hotspot_mask = SENSOR_HOTSPOT_GPU_MASK,
.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA132_THERMTRIP_GPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA132_THERMTRIP_GPUMEM_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra132_tsensor_group_pll = {
.id = TEGRA124_SOCTHERM_SENSOR_PLLX,
.name = "pll",
.sensor_temp_offset = SENSOR_TEMP2,
.sensor_temp_mask = SENSOR_TEMP2_PLLX_TEMP_MASK,
.pdiv = 8,
.pdiv_ate = 8,
.pdiv_mask = SENSOR_PDIV_PLLX_MASK,
.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA132_THERMTRIP_TSENSE_EN_MASK,
.thermtrip_threshold_mask = TEGRA132_THERMTRIP_TSENSE_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra132_tsensor_group_mem = {
.id = TEGRA124_SOCTHERM_SENSOR_MEM,
.name = "mem",
.sensor_temp_offset = SENSOR_TEMP2,
.sensor_temp_mask = SENSOR_TEMP2_MEM_TEMP_MASK,
.pdiv = 8,
.pdiv_ate = 8,
.pdiv_mask = SENSOR_PDIV_MEM_MASK,
.pllx_hotspot_diff = 0,
.pllx_hotspot_mask = SENSOR_HOTSPOT_MEM_MASK,
.thermtrip_any_en_mask = TEGRA132_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA132_THERMTRIP_MEM_EN_MASK,
.thermtrip_threshold_mask = TEGRA132_THERMTRIP_GPUMEM_THRESH_MASK,
};
static const struct tegra_tsensor_group *tegra132_tsensor_groups[] = {
&tegra132_tsensor_group_cpu,
&tegra132_tsensor_group_gpu,
&tegra132_tsensor_group_pll,
&tegra132_tsensor_group_mem,
};
static struct tegra_tsensor tegra132_tsensors[] = {
{
.name = "cpu0",
.base = 0xc0,
.config = &tegra132_tsensor_config,
.calib_fuse_offset = 0x098,
.fuse_corr_alpha = 1126600,
.fuse_corr_beta = -9433500,
.group = &tegra132_tsensor_group_cpu,
}, {
.name = "cpu1",
.base = 0xe0,
.config = &tegra132_tsensor_config,
.calib_fuse_offset = 0x084,
.fuse_corr_alpha = 1110800,
.fuse_corr_beta = -7383000,
.group = &tegra132_tsensor_group_cpu,
}, {
.name = "cpu2",
.base = 0x100,
.config = &tegra132_tsensor_config,
.calib_fuse_offset = 0x088,
.fuse_corr_alpha = 1113800,
.fuse_corr_beta = -6215200,
.group = &tegra132_tsensor_group_cpu,
}, {
.name = "cpu3",
.base = 0x120,
.config = &tegra132_tsensor_config,
.calib_fuse_offset = 0x12c,
.fuse_corr_alpha = 1129600,
.fuse_corr_beta = -8196100,
.group = &tegra132_tsensor_group_cpu,
}, {
.name = "mem0",
.base = 0x140,
.config = &tegra132_tsensor_config,
.calib_fuse_offset = 0x158,
.fuse_corr_alpha = 1132900,
.fuse_corr_beta = -6755300,
.group = &tegra132_tsensor_group_mem,
}, {
.name = "mem1",
.base = 0x160,
.config = &tegra132_tsensor_config,
.calib_fuse_offset = 0x15c,
.fuse_corr_alpha = 1142300,
.fuse_corr_beta = -7374200,
.group = &tegra132_tsensor_group_mem,
}, {
.name = "gpu",
.base = 0x180,
.config = &tegra132_tsensor_config,
.calib_fuse_offset = 0x154,
.fuse_corr_alpha = 1125100,
.fuse_corr_beta = -6350400,
.group = &tegra132_tsensor_group_gpu,
}, {
.name = "pllx",
.base = 0x1a0,
.config = &tegra132_tsensor_config,
.calib_fuse_offset = 0x160,
.fuse_corr_alpha = 1118100,
.fuse_corr_beta = -8208800,
.group = &tegra132_tsensor_group_pll,
},
};
/*
* Mask/shift bits in FUSE_TSENSOR_COMMON and
* FUSE_TSENSOR_COMMON, which are described in
* tegra_soctherm_fuse.c
*/
static const struct tegra_soctherm_fuse tegra132_soctherm_fuse = {
.fuse_base_cp_mask = 0x3ff,
.fuse_base_cp_shift = 0,
.fuse_base_ft_mask = 0x7ff << 10,
.fuse_base_ft_shift = 10,
.fuse_shift_ft_mask = 0x1f << 21,
.fuse_shift_ft_shift = 21,
.fuse_spare_realignment = 0x1fc,
};
const struct tegra_soctherm_soc tegra132_soctherm = {
.tsensors = tegra132_tsensors,
.num_tsensors = ARRAY_SIZE(tegra132_tsensors),
.ttgs = tegra132_tsensor_groups,
.num_ttgs = ARRAY_SIZE(tegra132_tsensor_groups),
.tfuse = &tegra132_soctherm_fuse,
.thresh_grain = TEGRA132_THRESH_GRAIN,
};
/*
* Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <soc/tegra/fuse.h>
#include <dt-bindings/thermal/tegra124-soctherm.h>
#include "soctherm.h"
#define TEGRA210_THERMTRIP_ANY_EN_MASK (0x1 << 31)
#define TEGRA210_THERMTRIP_MEM_EN_MASK (0x1 << 30)
#define TEGRA210_THERMTRIP_GPU_EN_MASK (0x1 << 29)
#define TEGRA210_THERMTRIP_CPU_EN_MASK (0x1 << 28)
#define TEGRA210_THERMTRIP_TSENSE_EN_MASK (0x1 << 27)
#define TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK (0x1ff << 18)
#define TEGRA210_THERMTRIP_CPU_THRESH_MASK (0x1ff << 9)
#define TEGRA210_THERMTRIP_TSENSE_THRESH_MASK 0x1ff
#define TEGRA210_THRESH_GRAIN 500
static const struct tegra_tsensor_configuration tegra210_tsensor_config = {
.tall = 16300,
.tiddq_en = 1,
.ten_count = 1,
.tsample = 120,
.tsample_ate = 480,
};
static const struct tegra_tsensor_group tegra210_tsensor_group_cpu = {
.id = TEGRA124_SOCTHERM_SENSOR_CPU,
.name = "cpu",
.sensor_temp_offset = SENSOR_TEMP1,
.sensor_temp_mask = SENSOR_TEMP1_CPU_TEMP_MASK,
.pdiv = 8,
.pdiv_ate = 8,
.pdiv_mask = SENSOR_PDIV_CPU_MASK,
.pllx_hotspot_diff = 10,
.pllx_hotspot_mask = SENSOR_HOTSPOT_CPU_MASK,
.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA210_THERMTRIP_CPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA210_THERMTRIP_CPU_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra210_tsensor_group_gpu = {
.id = TEGRA124_SOCTHERM_SENSOR_GPU,
.name = "gpu",
.sensor_temp_offset = SENSOR_TEMP1,
.sensor_temp_mask = SENSOR_TEMP1_GPU_TEMP_MASK,
.pdiv = 8,
.pdiv_ate = 8,
.pdiv_mask = SENSOR_PDIV_GPU_MASK,
.pllx_hotspot_diff = 5,
.pllx_hotspot_mask = SENSOR_HOTSPOT_GPU_MASK,
.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA210_THERMTRIP_GPU_EN_MASK,
.thermtrip_threshold_mask = TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra210_tsensor_group_pll = {
.id = TEGRA124_SOCTHERM_SENSOR_PLLX,
.name = "pll",
.sensor_temp_offset = SENSOR_TEMP2,
.sensor_temp_mask = SENSOR_TEMP2_PLLX_TEMP_MASK,
.pdiv = 8,
.pdiv_ate = 8,
.pdiv_mask = SENSOR_PDIV_PLLX_MASK,
.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA210_THERMTRIP_TSENSE_EN_MASK,
.thermtrip_threshold_mask = TEGRA210_THERMTRIP_TSENSE_THRESH_MASK,
};
static const struct tegra_tsensor_group tegra210_tsensor_group_mem = {
.id = TEGRA124_SOCTHERM_SENSOR_MEM,
.name = "mem",
.sensor_temp_offset = SENSOR_TEMP2,
.sensor_temp_mask = SENSOR_TEMP2_MEM_TEMP_MASK,
.pdiv = 8,
.pdiv_ate = 8,
.pdiv_mask = SENSOR_PDIV_MEM_MASK,
.pllx_hotspot_diff = 0,
.pllx_hotspot_mask = SENSOR_HOTSPOT_MEM_MASK,
.thermtrip_any_en_mask = TEGRA210_THERMTRIP_ANY_EN_MASK,
.thermtrip_enable_mask = TEGRA210_THERMTRIP_MEM_EN_MASK,
.thermtrip_threshold_mask = TEGRA210_THERMTRIP_GPUMEM_THRESH_MASK,
};
static const struct tegra_tsensor_group *tegra210_tsensor_groups[] = {
&tegra210_tsensor_group_cpu,
&tegra210_tsensor_group_gpu,
&tegra210_tsensor_group_pll,
&tegra210_tsensor_group_mem,
};
static const struct tegra_tsensor tegra210_tsensors[] = {
{
.name = "cpu0",
.base = 0xc0,
.config = &tegra210_tsensor_config,
.calib_fuse_offset = 0x098,
.fuse_corr_alpha = 1085000,
.fuse_corr_beta = 3244200,
.group = &tegra210_tsensor_group_cpu,
}, {
.name = "cpu1",
.base = 0xe0,
.config = &tegra210_tsensor_config,
.calib_fuse_offset = 0x084,
.fuse_corr_alpha = 1126200,
.fuse_corr_beta = -67500,
.group = &tegra210_tsensor_group_cpu,
}, {
.name = "cpu2",
.base = 0x100,
.config = &tegra210_tsensor_config,
.calib_fuse_offset = 0x088,
.fuse_corr_alpha = 1098400,
.fuse_corr_beta = 2251100,
.group = &tegra210_tsensor_group_cpu,
}, {
.name = "cpu3",
.base = 0x120,
.config = &tegra210_tsensor_config,
.calib_fuse_offset = 0x12c,
.fuse_corr_alpha = 1108000,
.fuse_corr_beta = 602700,
.group = &tegra210_tsensor_group_cpu,
}, {
.name = "mem0",
.base = 0x140,
.config = &tegra210_tsensor_config,
.calib_fuse_offset = 0x158,
.fuse_corr_alpha = 1069200,
.fuse_corr_beta = 3549900,
.group = &tegra210_tsensor_group_mem,
}, {
.name = "mem1",
.base = 0x160,
.config = &tegra210_tsensor_config,
.calib_fuse_offset = 0x15c,
.fuse_corr_alpha = 1173700,
.fuse_corr_beta = -6263600,
.group = &tegra210_tsensor_group_mem,
}, {
.name = "gpu",
.base = 0x180,
.config = &tegra210_tsensor_config,
.calib_fuse_offset = 0x154,
.fuse_corr_alpha = 1074300,
.fuse_corr_beta = 2734900,
.group = &tegra210_tsensor_group_gpu,
}, {
.name = "pllx",
.base = 0x1a0,
.config = &tegra210_tsensor_config,
.calib_fuse_offset = 0x160,
.fuse_corr_alpha = 1039700,
.fuse_corr_beta = 6829100,
.group = &tegra210_tsensor_group_pll,
},
};
/*
* Mask/shift bits in FUSE_TSENSOR_COMMON and
* FUSE_TSENSOR_COMMON, which are described in
* tegra_soctherm_fuse.c
*/
static const struct tegra_soctherm_fuse tegra210_soctherm_fuse = {
.fuse_base_cp_mask = 0x3ff << 11,
.fuse_base_cp_shift = 11,
.fuse_base_ft_mask = 0x7ff << 21,
.fuse_base_ft_shift = 21,
.fuse_shift_ft_mask = 0x1f << 6,
.fuse_shift_ft_shift = 6,
.fuse_spare_realignment = 0,
};
const struct tegra_soctherm_soc tegra210_soctherm = {
.tsensors = tegra210_tsensors,
.num_tsensors = ARRAY_SIZE(tegra210_tsensors),
.ttgs = tegra210_tsensor_groups,
.num_ttgs = ARRAY_SIZE(tegra210_tsensor_groups),
.tfuse = &tegra210_soctherm_fuse,
.thresh_grain = TEGRA210_THRESH_GRAIN,
};
/*
* Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
*
* Author:
* Mikko Perttunen <mperttunen@nvidia.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#include <linux/thermal.h>
#include <soc/tegra/fuse.h>
#define SENSOR_CONFIG0 0
#define SENSOR_CONFIG0_STOP BIT(0)
#define SENSOR_CONFIG0_TALL_SHIFT 8
#define SENSOR_CONFIG0_TCALC_OVER BIT(4)
#define SENSOR_CONFIG0_OVER BIT(3)
#define SENSOR_CONFIG0_CPTR_OVER BIT(2)
#define SENSOR_CONFIG1 4
#define SENSOR_CONFIG1_TSAMPLE_SHIFT 0
#define SENSOR_CONFIG1_TIDDQ_EN_SHIFT 15
#define SENSOR_CONFIG1_TEN_COUNT_SHIFT 24
#define SENSOR_CONFIG1_TEMP_ENABLE BIT(31)
#define SENSOR_CONFIG2 8
#define SENSOR_CONFIG2_THERMA_SHIFT 16
#define SENSOR_CONFIG2_THERMB_SHIFT 0
#define SENSOR_PDIV 0x1c0
#define SENSOR_PDIV_T124 0x8888
#define SENSOR_HOTSPOT_OFF 0x1c4
#define SENSOR_HOTSPOT_OFF_T124 0x00060600
#define SENSOR_TEMP1 0x1c8
#define SENSOR_TEMP2 0x1cc
#define SENSOR_TEMP_MASK 0xffff
#define READBACK_VALUE_MASK 0xff00
#define READBACK_VALUE_SHIFT 8
#define READBACK_ADD_HALF BIT(7)
#define READBACK_NEGATE BIT(0)
#define FUSE_TSENSOR8_CALIB 0x180
#define FUSE_SPARE_REALIGNMENT_REG_0 0x1fc
#define FUSE_TSENSOR_CALIB_CP_TS_BASE_MASK 0x1fff
#define FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK (0x1fff << 13)
#define FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT 13
#define FUSE_TSENSOR8_CALIB_CP_TS_BASE_MASK 0x3ff
#define FUSE_TSENSOR8_CALIB_FT_TS_BASE_MASK (0x7ff << 10)
#define FUSE_TSENSOR8_CALIB_FT_TS_BASE_SHIFT 10
#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_CP_MASK 0x3f
#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_MASK (0x1f << 21)
#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_SHIFT 21
#define NOMINAL_CALIB_FT_T124 105
#define NOMINAL_CALIB_CP_T124 25
struct tegra_tsensor_configuration {
u32 tall, tsample, tiddq_en, ten_count, pdiv, tsample_ate, pdiv_ate;
};
struct tegra_tsensor {
const struct tegra_tsensor_configuration *config;
u32 base, calib_fuse_offset;
/* Correction values used to modify values read from calibration fuses */
s32 fuse_corr_alpha, fuse_corr_beta;
};
struct tegra_thermctl_zone {
void __iomem *reg;
unsigned int shift;
};
static const struct tegra_tsensor_configuration t124_tsensor_config = {
.tall = 16300,
.tsample = 120,
.tiddq_en = 1,
.ten_count = 1,
.pdiv = 8,
.tsample_ate = 480,
.pdiv_ate = 8
};
static const struct tegra_tsensor t124_tsensors[] = {
{
.config = &t124_tsensor_config,
.base = 0xc0,
.calib_fuse_offset = 0x098,
.fuse_corr_alpha = 1135400,
.fuse_corr_beta = -6266900,
},
{
.config = &t124_tsensor_config,
.base = 0xe0,
.calib_fuse_offset = 0x084,
.fuse_corr_alpha = 1122220,
.fuse_corr_beta = -5700700,
},
{
.config = &t124_tsensor_config,
.base = 0x100,
.calib_fuse_offset = 0x088,
.fuse_corr_alpha = 1127000,
.fuse_corr_beta = -6768200,
},
{
.config = &t124_tsensor_config,
.base = 0x120,
.calib_fuse_offset = 0x12c,
.fuse_corr_alpha = 1110900,
.fuse_corr_beta = -6232000,
},
{
.config = &t124_tsensor_config,
.base = 0x140,
.calib_fuse_offset = 0x158,
.fuse_corr_alpha = 1122300,
.fuse_corr_beta = -5936400,
},
{
.config = &t124_tsensor_config,
.base = 0x160,
.calib_fuse_offset = 0x15c,
.fuse_corr_alpha = 1145700,
.fuse_corr_beta = -7124600,
},
{
.config = &t124_tsensor_config,
.base = 0x180,
.calib_fuse_offset = 0x154,
.fuse_corr_alpha = 1120100,
.fuse_corr_beta = -6000500,
},
{
.config = &t124_tsensor_config,
.base = 0x1a0,
.calib_fuse_offset = 0x160,
.fuse_corr_alpha = 1106500,
.fuse_corr_beta = -6729300,
},
};
struct tegra_soctherm {
struct reset_control *reset;
struct clk *clock_tsensor;
struct clk *clock_soctherm;
void __iomem *regs;
struct thermal_zone_device *thermctl_tzs[4];
};
struct tsensor_shared_calibration {
u32 base_cp, base_ft;
u32 actual_temp_cp, actual_temp_ft;
};
static int calculate_shared_calibration(struct tsensor_shared_calibration *r)
{
u32 val, shifted_cp, shifted_ft;
int err;
err = tegra_fuse_readl(FUSE_TSENSOR8_CALIB, &val);
if (err)
return err;
r->base_cp = val & FUSE_TSENSOR8_CALIB_CP_TS_BASE_MASK;
r->base_ft = (val & FUSE_TSENSOR8_CALIB_FT_TS_BASE_MASK)
>> FUSE_TSENSOR8_CALIB_FT_TS_BASE_SHIFT;
val = ((val & FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_MASK)
>> FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_SHIFT);
shifted_ft = sign_extend32(val, 4);
err = tegra_fuse_readl(FUSE_SPARE_REALIGNMENT_REG_0, &val);
if (err)
return err;
shifted_cp = sign_extend32(val, 5);
r->actual_temp_cp = 2 * NOMINAL_CALIB_CP_T124 + shifted_cp;
r->actual_temp_ft = 2 * NOMINAL_CALIB_FT_T124 + shifted_ft;
return 0;
}
static s64 div64_s64_precise(s64 a, s64 b)
{
s64 r, al;
/* Scale up for increased precision division */
al = a << 16;
r = div64_s64(al * 2 + 1, 2 * b);
return r >> 16;
}
static int
calculate_tsensor_calibration(const struct tegra_tsensor *sensor,
const struct tsensor_shared_calibration *shared,
u32 *calib)
{
u32 val;
s32 actual_tsensor_ft, actual_tsensor_cp, delta_sens, delta_temp,
mult, div;
s16 therma, thermb;
s64 tmp;
int err;
err = tegra_fuse_readl(sensor->calib_fuse_offset, &val);
if (err)
return err;
actual_tsensor_cp = (shared->base_cp * 64) + sign_extend32(val, 12);
val = (val & FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK)
>> FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT;
actual_tsensor_ft = (shared->base_ft * 32) + sign_extend32(val, 12);
delta_sens = actual_tsensor_ft - actual_tsensor_cp;
delta_temp = shared->actual_temp_ft - shared->actual_temp_cp;
mult = sensor->config->pdiv * sensor->config->tsample_ate;
div = sensor->config->tsample * sensor->config->pdiv_ate;
therma = div64_s64_precise((s64) delta_temp * (1LL << 13) * mult,
(s64) delta_sens * div);
tmp = (s64)actual_tsensor_ft * shared->actual_temp_cp -
(s64)actual_tsensor_cp * shared->actual_temp_ft;
thermb = div64_s64_precise(tmp, (s64)delta_sens);
therma = div64_s64_precise((s64)therma * sensor->fuse_corr_alpha,
(s64)1000000LL);
thermb = div64_s64_precise((s64)thermb * sensor->fuse_corr_alpha +
sensor->fuse_corr_beta, (s64)1000000LL);
*calib = ((u16)therma << SENSOR_CONFIG2_THERMA_SHIFT) |
((u16)thermb << SENSOR_CONFIG2_THERMB_SHIFT);
return 0;
}
static int enable_tsensor(struct tegra_soctherm *tegra,
const struct tegra_tsensor *sensor,
const struct tsensor_shared_calibration *shared)
{
void __iomem *base = tegra->regs + sensor->base;
unsigned int val;
u32 calib;
int err;
err = calculate_tsensor_calibration(sensor, shared, &calib);
if (err)
return err;
val = sensor->config->tall << SENSOR_CONFIG0_TALL_SHIFT;
writel(val, base + SENSOR_CONFIG0);
val = (sensor->config->tsample - 1) << SENSOR_CONFIG1_TSAMPLE_SHIFT;
val |= sensor->config->tiddq_en << SENSOR_CONFIG1_TIDDQ_EN_SHIFT;
val |= sensor->config->ten_count << SENSOR_CONFIG1_TEN_COUNT_SHIFT;
val |= SENSOR_CONFIG1_TEMP_ENABLE;
writel(val, base + SENSOR_CONFIG1);
writel(calib, base + SENSOR_CONFIG2);
return 0;
}
/*
* Translate from soctherm readback format to millicelsius.
* The soctherm readback format in bits is as follows:
* TTTTTTTT H______N
* where T's contain the temperature in Celsius,
* H denotes an addition of 0.5 Celsius and N denotes negation
* of the final value.
*/
static int translate_temp(u16 val)
{
long t;
t = ((val & READBACK_VALUE_MASK) >> READBACK_VALUE_SHIFT) * 1000;
if (val & READBACK_ADD_HALF)
t += 500;
if (val & READBACK_NEGATE)
t *= -1;
return t;
}
static int tegra_thermctl_get_temp(void *data, int *out_temp)
{
struct tegra_thermctl_zone *zone = data;
u32 val;
val = (readl(zone->reg) >> zone->shift) & SENSOR_TEMP_MASK;
*out_temp = translate_temp(val);
return 0;
}
static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = {
.get_temp = tegra_thermctl_get_temp,
};
static const struct of_device_id tegra_soctherm_of_match[] = {
{ .compatible = "nvidia,tegra124-soctherm" },
{ },
};
MODULE_DEVICE_TABLE(of, tegra_soctherm_of_match);
struct thermctl_zone_desc {
unsigned int offset;
unsigned int shift;
};
static const struct thermctl_zone_desc t124_thermctl_temp_zones[] = {
{ SENSOR_TEMP1, 16 },
{ SENSOR_TEMP2, 16 },
{ SENSOR_TEMP1, 0 },
{ SENSOR_TEMP2, 0 }
};
static int tegra_soctherm_probe(struct platform_device *pdev)
{
struct tegra_soctherm *tegra;
struct thermal_zone_device *tz;
struct tsensor_shared_calibration shared_calib;
struct resource *res;
unsigned int i;
int err;
const struct tegra_tsensor *tsensors = t124_tsensors;
tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
if (!tegra)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
tegra->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(tegra->regs))
return PTR_ERR(tegra->regs);
tegra->reset = devm_reset_control_get(&pdev->dev, "soctherm");
if (IS_ERR(tegra->reset)) {
dev_err(&pdev->dev, "can't get soctherm reset\n");
return PTR_ERR(tegra->reset);
}
tegra->clock_tsensor = devm_clk_get(&pdev->dev, "tsensor");
if (IS_ERR(tegra->clock_tsensor)) {
dev_err(&pdev->dev, "can't get tsensor clock\n");
return PTR_ERR(tegra->clock_tsensor);
}
tegra->clock_soctherm = devm_clk_get(&pdev->dev, "soctherm");
if (IS_ERR(tegra->clock_soctherm)) {
dev_err(&pdev->dev, "can't get soctherm clock\n");
return PTR_ERR(tegra->clock_soctherm);
}
reset_control_assert(tegra->reset);
err = clk_prepare_enable(tegra->clock_soctherm);
if (err)
return err;
err = clk_prepare_enable(tegra->clock_tsensor);
if (err) {
clk_disable_unprepare(tegra->clock_soctherm);
return err;
}
reset_control_deassert(tegra->reset);
/* Initialize raw sensors */
err = calculate_shared_calibration(&shared_calib);
if (err)
goto disable_clocks;
for (i = 0; i < ARRAY_SIZE(t124_tsensors); ++i) {
err = enable_tsensor(tegra, tsensors + i, &shared_calib);
if (err)
goto disable_clocks;
}
writel(SENSOR_PDIV_T124, tegra->regs + SENSOR_PDIV);
writel(SENSOR_HOTSPOT_OFF_T124, tegra->regs + SENSOR_HOTSPOT_OFF);
/* Initialize thermctl sensors */
for (i = 0; i < ARRAY_SIZE(tegra->thermctl_tzs); ++i) {
struct tegra_thermctl_zone *zone =
devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
if (!zone) {
err = -ENOMEM;
goto unregister_tzs;
}
zone->reg = tegra->regs + t124_thermctl_temp_zones[i].offset;
zone->shift = t124_thermctl_temp_zones[i].shift;
tz = thermal_zone_of_sensor_register(&pdev->dev, i, zone,
&tegra_of_thermal_ops);
if (IS_ERR(tz)) {
err = PTR_ERR(tz);
dev_err(&pdev->dev, "failed to register sensor: %d\n",
err);
goto unregister_tzs;
}
tegra->thermctl_tzs[i] = tz;
}
return 0;
unregister_tzs:
while (i--)
thermal_zone_of_sensor_unregister(&pdev->dev,
tegra->thermctl_tzs[i]);
disable_clocks:
clk_disable_unprepare(tegra->clock_tsensor);
clk_disable_unprepare(tegra->clock_soctherm);
return err;
}
static int tegra_soctherm_remove(struct platform_device *pdev)
{
struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
unsigned int i;
for (i = 0; i < ARRAY_SIZE(tegra->thermctl_tzs); ++i) {
thermal_zone_of_sensor_unregister(&pdev->dev,
tegra->thermctl_tzs[i]);
}
clk_disable_unprepare(tegra->clock_tsensor);
clk_disable_unprepare(tegra->clock_soctherm);
return 0;
}
static struct platform_driver tegra_soctherm_driver = {
.probe = tegra_soctherm_probe,
.remove = tegra_soctherm_remove,
.driver = {
.name = "tegra-soctherm",
.of_match_table = tegra_soctherm_of_match,
},
};
module_platform_driver(tegra_soctherm_driver);
MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
MODULE_DESCRIPTION("NVIDIA Tegra SOCTHERM thermal management driver");
MODULE_LICENSE("GPL v2");
/*
* Generic ADC thermal driver
*
* Copyright (C) 2016 NVIDIA CORPORATION. All rights reserved.
*
* Author: Laxman Dewangan <ldewangan@nvidia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/iio/consumer.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/thermal.h>
struct gadc_thermal_info {
struct device *dev;
struct thermal_zone_device *tz_dev;
struct iio_channel *channel;
s32 *lookup_table;
int nlookup_table;
};
static int gadc_thermal_adc_to_temp(struct gadc_thermal_info *gti, int val)
{
int temp, adc_hi, adc_lo;
int i;
for (i = 0; i < gti->nlookup_table; i++) {
if (val >= gti->lookup_table[2 * i + 1])
break;
}
if (i == 0) {
temp = gti->lookup_table[0];
} else if (i >= (gti->nlookup_table - 1)) {
temp = gti->lookup_table[2 * (gti->nlookup_table - 1)];
} else {
adc_hi = gti->lookup_table[2 * i - 1];
adc_lo = gti->lookup_table[2 * i + 1];
temp = gti->lookup_table[2 * i];
temp -= ((val - adc_lo) * 1000) / (adc_hi - adc_lo);
}
return temp;
}
static int gadc_thermal_get_temp(void *data, int *temp)
{
struct gadc_thermal_info *gti = data;
int val;
int ret;
ret = iio_read_channel_processed(gti->channel, &val);
if (ret < 0) {
dev_err(gti->dev, "IIO channel read failed %d\n", ret);
return ret;
}
*temp = gadc_thermal_adc_to_temp(gti, val);
return 0;
}
static const struct thermal_zone_of_device_ops gadc_thermal_ops = {
.get_temp = gadc_thermal_get_temp,
};
static int gadc_thermal_read_linear_lookup_table(struct device *dev,
struct gadc_thermal_info *gti)
{
struct device_node *np = dev->of_node;
int ntable;
int ret;
ntable = of_property_count_elems_of_size(np, "temperature-lookup-table",
sizeof(u32));
if (ntable < 0) {
dev_err(dev, "Lookup table is not provided\n");
return ntable;
}
if (ntable % 2) {
dev_err(dev, "Pair of temperature vs ADC read value missing\n");
return -EINVAL;
}
gti->lookup_table = devm_kzalloc(dev, sizeof(*gti->lookup_table) *
ntable, GFP_KERNEL);
if (!gti->lookup_table)
return -ENOMEM;
ret = of_property_read_u32_array(np, "temperature-lookup-table",
(u32 *)gti->lookup_table, ntable);
if (ret < 0) {
dev_err(dev, "Failed to read temperature lookup table: %d\n",
ret);
return ret;
}
gti->nlookup_table = ntable / 2;
return 0;
}
static int gadc_thermal_probe(struct platform_device *pdev)
{
struct gadc_thermal_info *gti;
int ret;
if (!pdev->dev.of_node) {
dev_err(&pdev->dev, "Only DT based supported\n");
return -ENODEV;
}
gti = devm_kzalloc(&pdev->dev, sizeof(*gti), GFP_KERNEL);
if (!gti)
return -ENOMEM;
ret = gadc_thermal_read_linear_lookup_table(&pdev->dev, gti);
if (ret < 0)
return ret;
gti->dev = &pdev->dev;
platform_set_drvdata(pdev, gti);
gti->channel = iio_channel_get(&pdev->dev, "sensor-channel");
if (IS_ERR(gti->channel)) {
ret = PTR_ERR(gti->channel);
dev_err(&pdev->dev, "IIO channel not found: %d\n", ret);
return ret;
}
gti->tz_dev = thermal_zone_of_sensor_register(&pdev->dev, 0,
gti, &gadc_thermal_ops);
if (IS_ERR(gti->tz_dev)) {
ret = PTR_ERR(gti->tz_dev);
dev_err(&pdev->dev, "Thermal zone sensor register failed: %d\n",
ret);
goto sensor_fail;
}
return 0;
sensor_fail:
iio_channel_release(gti->channel);
return ret;
}
static int gadc_thermal_remove(struct platform_device *pdev)
{
struct gadc_thermal_info *gti = platform_get_drvdata(pdev);
thermal_zone_of_sensor_unregister(&pdev->dev, gti->tz_dev);
iio_channel_release(gti->channel);
return 0;
}
static const struct of_device_id of_adc_thermal_match[] = {
{ .compatible = "generic-adc-thermal", },
{},
};
MODULE_DEVICE_TABLE(of, of_adc_thermal_match);
static struct platform_driver gadc_thermal_driver = {
.driver = {
.name = "generic-adc-thermal",
.of_match_table = of_adc_thermal_match,
},
.probe = gadc_thermal_probe,
.remove = gadc_thermal_remove,
};
module_platform_driver(gadc_thermal_driver);
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
MODULE_DESCRIPTION("Generic ADC thermal driver using IIO framework with DT");
MODULE_LICENSE("GPL v2");
......@@ -337,7 +337,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
return -EINVAL;
/* in case this is specified by DT */
data->ti_thermal = thermal_zone_of_sensor_register(bgp->dev, id,
data->ti_thermal = devm_thermal_zone_of_sensor_register(bgp->dev, id,
data, &ti_of_thermal_ops);
if (IS_ERR(data->ti_thermal)) {
/* Create thermal zone */
......@@ -368,9 +368,6 @@ int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id)
if (data && data->ti_thermal) {
if (data->our_zone)
thermal_zone_device_unregister(data->ti_thermal);
else
thermal_zone_of_sensor_unregister(bgp->dev,
data->ti_thermal);
}
return 0;
......
......@@ -555,7 +555,7 @@ static int pkg_temp_thermal_cpu_callback(struct notifier_block *nfb,
{
unsigned int cpu = (unsigned long) hcpu;
switch (action) {
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_ONLINE:
case CPU_DOWN_FAILED:
get_core_online(cpu);
......
......@@ -9,5 +9,6 @@
#define TEGRA124_SOCTHERM_SENSOR_MEM 1
#define TEGRA124_SOCTHERM_SENSOR_GPU 2
#define TEGRA124_SOCTHERM_SENSOR_PLLX 3
#define TEGRA124_SOCTHERM_SENSOR_NUM 4
#endif
......@@ -340,6 +340,7 @@ struct thermal_zone_of_device_ops {
int (*get_temp)(void *, int *);
int (*get_trend)(void *, long *);
int (*set_emul_temp)(void *, int);
int (*set_trip_temp)(void *, int, int);
};
/**
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment