USB: at91_udc: Additional checks

This patch performs additional checks in at91_udc, just in case of
some spurious interrupts or device enumeration.
Signed-off-by: Wojtek Kaniewski <wojtekka@toxygen.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/gadget/at91_udc.c

@@ -955,7 +955,10 @@ static int at91_vbus_session(struct usb_gadget *gadget, int is_active)
 	// VDBG("vbus %s\n", is_active ? "on" : "off");
 	local_irq_save(flags);
 	udc->vbus = (is_active != 0);
+	if (udc->driver)
 		pullup(udc, is_active);
+	else
+		pullup(udc, 0);
 	local_irq_restore(flags);
 	return 0;
 }
@@ -1241,7 +1244,10 @@ static void handle_setup(struct at91_udc *udc, struct at91_ep *ep, u32 csr)
 #undef w_length
 
 	/* pass request up to the gadget driver */
+	if (udc->driver)
 		status = udc->driver->setup(&udc->gadget, &pkt.r);
+	else
+		status = -ENODEV;
 	if (status < 0) {
 stall:
 		VDBG("req %02x.%02x protocol STALL; stat %d\n",