arm64: remove unnecessary cache flush at boot

Currently we flush the entire dcache at boot within __cpu_setup, but
this is unnecessary as the booting protocol demands that the dcache is
invalid and off upon entering the kernel. The presence of the cache
flush only serves to hide bugs in bootloaders, and is not safe in the
presence of SMP.

In an SMP boot scenario the CPUs enter coherency outside of the kernel,
and the primary CPU enables its caches before bringing up secondary
CPUs. Therefore if any secondary CPU has an entry in its cache (in
violation of the boot protocol), the primary CPU might snoop it even if
the secondary CPU's cache is disabled. The boot-time cache flush only
serves to hide a firmware bug, and slows down a cpu boot unnecessarily.

This patch removes the unnecessary boot-time cache flush.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
[catalin.marinas@arm.com: make __flush_dcache_all local only]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

arch/arm64/mm/cache.S

@@ -30,7 +30,7 @@
  *
  *	Corrupted registers: x0-x7, x9-x11
  */
-ENTRY(__flush_dcache_all)
+__flush_dcache_all:
 	dsb	sy				// ensure ordering with previous memory accesses
 	mrs	x0, clidr_el1			// read clidr
 	and	x3, x0, #0x7000000		// extract loc from clidr

arch/arm64/mm/proc.S

@@ -173,12 +173,6 @@ ENDPROC(cpu_do_switch_mm)
  *	value of the SCTLR_EL1 register.
  */
 ENTRY(__cpu_setup)
-	/*
-	 * Preserve the link register across the function call.
-	 */
-	mov	x28, lr
-	bl	__flush_dcache_all
-	mov	lr, x28
 	ic	iallu				// I+BTB cache invalidate
 	tlbi	vmalle1is			// invalidate I + D TLBs
 	dsb	sy