treewide: Fix typos in printk

This patch fix spelling typos found in printk
within various part of the kernel sources.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

arch/x86/kernel/cpu/microcode/intel.c

@@ -422,7 +422,7 @@ static void show_saved_mc(void)
 		data_size = get_datasize(mc_saved_header);
 		date = mc_saved_header->date;
 
-		pr_debug("mc_saved[%d]: sig=0x%x, pf=0x%x, rev=0x%x, toal size=0x%x, date = %04x-%02x-%02x\n",
+		pr_debug("mc_saved[%d]: sig=0x%x, pf=0x%x, rev=0x%x, total size=0x%x, date = %04x-%02x-%02x\n",
 			 i, sig, pf, rev, total_size,
 			 date & 0xffff,
 			 date >> 24,

arch/x86/kvm/iommu.c

@@ -254,7 +254,7 @@ int kvm_iommu_map_guest(struct kvm *kvm)
 	    !iommu_capable(&pci_bus_type, IOMMU_CAP_INTR_REMAP)) {
 		printk(KERN_WARNING "%s: No interrupt remapping support,"
 		       " disallowing device assignment."
-		       " Re-enble with \"allow_unsafe_assigned_interrupts=1\""
+		       " Re-enable with \"allow_unsafe_assigned_interrupts=1\""
 		       " module option.\n", __func__);
 		iommu_domain_free(kvm->arch.iommu_domain);
 		kvm->arch.iommu_domain = NULL;

block/partitions/efi.c

@@ -430,7 +430,7 @@ static int is_gpt_valid(struct parsed_partitions *state, u64 lba,
 	}
 	/* Check that sizeof_partition_entry has the correct value */
 	if (le32_to_cpu((*gpt)->sizeof_partition_entry) != sizeof(gpt_entry)) {
-		pr_debug("GUID Partitition Entry Size check failed.\n");
+		pr_debug("GUID Partition Entry Size check failed.\n");
 		goto fail;
 	}
 
@@ -443,7 +443,7 @@ static int is_gpt_valid(struct parsed_partitions *state, u64 lba,
 			le32_to_cpu((*gpt)->sizeof_partition_entry));
 
 	if (crc != le32_to_cpu((*gpt)->partition_entry_array_crc32)) {
-		pr_debug("GUID Partitition Entry Array CRC check failed.\n");
+		pr_debug("GUID Partition Entry Array CRC check failed.\n");
 		goto fail_ptes;
 	}
 

drivers/edac/amd64_edac.c

@@ -645,7 +645,7 @@ static u64 sys_addr_to_input_addr(struct mem_ctl_info *mci, u64 sys_addr)
 	input_addr =
 	    dram_addr_to_input_addr(mci, sys_addr_to_dram_addr(mci, sys_addr));
 
-	edac_dbg(2, "SysAdddr 0x%lx translates to InputAddr 0x%lx\n",
+	edac_dbg(2, "SysAddr 0x%lx translates to InputAddr 0x%lx\n",
 		 (unsigned long)sys_addr, (unsigned long)input_addr);
 
 	return input_addr;

drivers/mtd/sm_ftl.c

@@ -386,7 +386,7 @@ static int sm_write_block(struct sm_ftl *ftl, uint8_t *buf,
 		if (test_bit(boffset / SM_SECTOR_SIZE, &invalid_bitmap)) {
 
 			sm_printk("sector %d of block at LBA %d of zone %d"
-				" coudn't be read, marking it as invalid",
+				" couldn't be read, marking it as invalid",
 				boffset / SM_SECTOR_SIZE, lba, zone);
 
 			oob.data_status = 0;

drivers/net/ethernet/mellanox/mlx5/core/sriov.c

@@ -140,7 +140,7 @@ int mlx5_core_sriov_configure(struct pci_dev *pdev, int num_vfs)
 	struct mlx5_core_sriov *sriov = &dev->priv.sriov;
 	int err;
 
-	mlx5_core_dbg(dev, "requsted num_vfs %d\n", num_vfs);
+	mlx5_core_dbg(dev, "requested num_vfs %d\n", num_vfs);
 	if (!mlx5_core_is_pf(dev))
 		return -EPERM;
 

drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c

@@ -2315,14 +2315,14 @@ static void _rtl8821ae_clear_pci_pme_status(struct ieee80211_hw *hw)
 
 	pci_read_config_byte(rtlpci->pdev, 0x34, &cap_pointer);
 	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-		 "PCI configration 0x34 = 0x%2x\n", cap_pointer);
+		 "PCI configuration 0x34 = 0x%2x\n", cap_pointer);
 
 	do {
 		pci_read_config_word(rtlpci->pdev, cap_pointer, &cap_hdr);
 		cap_id = cap_hdr & 0xFF;
 
 		RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-			 "in pci configration, cap_pointer%x = %x\n",
+			 "in pci configuration, cap_pointer%x = %x\n",
 			  cap_pointer, cap_id);
 
 		if (cap_id == 0x01) {

drivers/scsi/aic94xx/aic94xx_hwi.c

@@ -477,7 +477,7 @@ static int asd_init_chip(struct asd_ha_struct *asd_ha)
 
 	err = asd_start_seqs(asd_ha);
 	if (err) {
-		asd_printk("coudln't start seqs for %s\n",
+		asd_printk("couldn't start seqs for %s\n",
 			   pci_name(asd_ha->pcidev));
 		goto out;
 	}

drivers/scsi/aic94xx/aic94xx_seq.c

@@ -1352,7 +1352,7 @@ int asd_start_seqs(struct asd_ha_struct *asd_ha)
 	for_each_sequencer(lseq_mask, lseq_mask, lseq) {
 		err = asd_seq_start_lseq(asd_ha, lseq);
 		if (err) {
-			asd_printk("coudln't start LSEQ %d for %s\n", lseq,
+			asd_printk("couldn't start LSEQ %d for %s\n", lseq,
 				   pci_name(asd_ha->pcidev));
 			return err;
 		}

drivers/scsi/isci/port.c

@@ -794,7 +794,7 @@ static void port_timeout(unsigned long data)
 		 * case stay in the stopped state.
 		 */
 		dev_err(sciport_to_dev(iport),
-			"%s: SCIC Port 0x%p failed to stop before tiemout.\n",
+			"%s: SCIC Port 0x%p failed to stop before timeout.\n",
 			__func__,
 			iport);
 	} else if (current_state == SCI_PORT_STOPPING) {

fs/exofs/super.c

@@ -122,7 +122,7 @@ static int parse_options(char *options, struct exofs_mountopt *opts)
 			if (match_int(&args[0], &option))
 				return -EINVAL;
 			if (option <= 0) {
-				EXOFS_ERR("Timout must be > 0");
+				EXOFS_ERR("Timeout must be > 0");
 				return -EINVAL;
 			}
 			opts->timeout = option * HZ;

net/tipc/socket.c

@@ -366,7 +366,7 @@ static int tipc_sk_create(struct net *net, struct socket *sock,
 	sock->state = state;
 	sock_init_data(sock, sk);
 	if (tipc_sk_insert(tsk)) {
-		pr_warn("Socket create failed; port numbrer exhausted\n");
+		pr_warn("Socket create failed; port number exhausted\n");
 		return -EINVAL;
 	}
 	msg_set_origport(msg, tsk->portid);