Commit c1b034a4 authored by Takashi Iwai's avatar Takashi Iwai

ALSA: usb-audio: Move tx_length quirk handling to quirk_flags

There is another quirk for the transfer, and that's currently specific
to Zoom R16/24, handled in create_standard_audio_quirk().  Let's move
this also to the new quirk_flags.

Link: https://lore.kernel.org/r/20210729073855.19043-5-tiwai@suse.deSigned-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent af158a7f
......@@ -240,6 +240,11 @@ static void retire_inbound_urb(struct snd_usb_endpoint *ep,
call_retire_callback(ep, urb);
}
static inline bool has_tx_length_quirk(struct snd_usb_audio *chip)
{
return chip->quirk_flags & QUIRK_FLAG_TX_LENGTH;
}
static void prepare_silent_urb(struct snd_usb_endpoint *ep,
struct snd_urb_ctx *ctx)
{
......@@ -250,7 +255,7 @@ static void prepare_silent_urb(struct snd_usb_endpoint *ep,
int i;
/* For tx_length_quirk, put packet length at start of packet */
if (ep->chip->tx_length_quirk)
if (has_tx_length_quirk(ep->chip))
extra = sizeof(packet_length);
for (i = 0; i < ctx->packets; ++i) {
......@@ -952,7 +957,7 @@ static int data_ep_set_params(struct snd_usb_endpoint *ep)
unsigned int max_urbs, i;
const struct audioformat *fmt = ep->cur_audiofmt;
int frame_bits = ep->cur_frame_bytes * 8;
int tx_length_quirk = (chip->tx_length_quirk &&
int tx_length_quirk = (has_tx_length_quirk(chip) &&
usb_pipeout(ep->pipe));
usb_audio_dbg(chip, "Setting params for data EP 0x%x, pipe 0x%x\n",
......
......@@ -95,9 +95,6 @@ static int create_standard_audio_quirk(struct snd_usb_audio *chip,
struct usb_interface_descriptor *altsd;
int err;
if (chip->usb_id == USB_ID(0x1686, 0x00dd)) /* Zoom R16/24 */
chip->tx_length_quirk = 1;
alts = &iface->altsetting[0];
altsd = get_iface_desc(alts);
err = snd_usb_parse_audio_interface(chip, altsd->bInterfaceNumber);
......@@ -1909,6 +1906,8 @@ static const struct usb_audio_quirk_flags_table quirk_flags_table[] = {
QUIRK_FLAG_SHARE_MEDIA_DEVICE | QUIRK_FLAG_ALIGN_TRANSFER),
DEVICE_FLG(0x1395, 0x740a, /* Sennheiser DECT */
QUIRK_FLAG_GET_SAMPLE_RATE),
DEVICE_FLG(0x1686, 0x00dd, /* Zoom R16/24 */
QUIRK_FLAG_TX_LENGTH),
DEVICE_FLG(0x1901, 0x0191, /* GE B850V3 CP2114 audio interface */
QUIRK_FLAG_GET_SAMPLE_RATE),
DEVICE_FLG(0x2040, 0x7200, /* Hauppauge HVR-950Q */
......
......@@ -90,7 +90,7 @@ static void snd_usb_init_substream(struct snd_usb_stream *as,
subs->direction = stream;
subs->dev = as->chip->dev;
subs->txfr_quirk = !!(as->chip->quirk_flags & QUIRK_FLAG_ALIGN_TRANSFER);
subs->tx_length_quirk = as->chip->tx_length_quirk;
subs->tx_length_quirk = !!(as->chip->quirk_flags & QUIRK_FLAG_TX_LENGTH);
subs->speed = snd_usb_get_speed(subs->dev);
subs->pkt_offset_adj = 0;
subs->stream_offset_adj = 0;
......
......@@ -35,7 +35,6 @@ struct snd_usb_audio {
atomic_t usage_count;
wait_queue_head_t shutdown_wait;
unsigned int quirk_flags;
unsigned int tx_length_quirk:1; /* Put length specifier in transfers */
unsigned int need_delayed_register:1; /* warn for delayed registration */
unsigned int playback_first:1; /* for implicit fb: don't wait for the first capture URBs */
int num_interfaces;
......@@ -138,10 +137,13 @@ extern bool snd_usb_skip_validation;
* QUIRK_FLAG_ALIGN_TRANSFER:
* Allow alignment on audio sub-slot (channel samples) rather than on audio
* slots (audio frames)
* QUIRK_TX_LENGTH:
* Add length specifier to transfers
*/
#define QUIRK_FLAG_GET_SAMPLE_RATE (1U << 0)
#define QUIRK_FLAG_SHARE_MEDIA_DEVICE (1U << 1)
#define QUIRK_FLAG_ALIGN_TRANSFER (1U << 2)
#define QUIRK_FLAG_TX_LENGTH (1U << 3)
#endif /* __USBAUDIO_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment