drm/i915: replace drm_get_connector_name() with direct name field use

Generated using semantic patches:

@@
expression E;
@@

- drm_get_connector_name(&E)
+ E.name

@@
expression E;
@@

- drm_get_connector_name(E)
+ E->name

v2: Turn drm_get_connector_name(&E) into E.name instead of &(E)->name.
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drivers/gpu/drm/i915/i915_debugfs.c

@@ -2202,7 +2202,7 @@ static void intel_encoder_info(struct seq_file *m,
 		struct drm_connector *connector = &intel_connector->base;
 		seq_printf(m, "\t\tconnector %d: type: %s, status: %s",
 			   connector->base.id,
-			   drm_get_connector_name(connector),
+			   connector->name,
 			   drm_get_connector_status_name(connector->status));
 		if (connector->status == connector_status_connected) {
 			struct drm_display_mode *mode = &crtc->mode;
@@ -2273,7 +2273,7 @@ static void intel_connector_info(struct seq_file *m,
 	struct drm_display_mode *mode;
 
 	seq_printf(m, "connector %d: type %s, status: %s\n",
-		   connector->base.id, drm_get_connector_name(connector),
+		   connector->base.id, connector->name,
 		   drm_get_connector_status_name(connector->status));
 	if (connector->status == connector_status_connected) {
 		seq_printf(m, "\tname: %s\n", connector->display_info.name);

drivers/gpu/drm/i915/i915_irq.c

@@ -1089,7 +1089,7 @@ static bool intel_hpd_irq_event(struct drm_device *dev,
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n",
 		      connector->base.id,
-		      drm_get_connector_name(connector),
+		      connector->name,
 		      drm_get_connector_status_name(old_status),
 		      drm_get_connector_status_name(connector->status));
 
@@ -1134,7 +1134,7 @@ static void i915_hotplug_work_func(struct work_struct *work)
 		    connector->polled == DRM_CONNECTOR_POLL_HPD) {
 			DRM_INFO("HPD interrupt storm detected on connector %s: "
 				 "switching from hotplug detection to polling\n",
-				drm_get_connector_name(connector));
+				connector->name);
 			dev_priv->hpd_stats[intel_encoder->hpd_pin].hpd_mark = HPD_DISABLED;
 			connector->polled = DRM_CONNECTOR_POLL_CONNECT
 				| DRM_CONNECTOR_POLL_DISCONNECT;
@@ -1142,7 +1142,7 @@ static void i915_hotplug_work_func(struct work_struct *work)
 		}
 		if (hpd_event_bits & (1 << intel_encoder->hpd_pin)) {
 			DRM_DEBUG_KMS("Connector %s (pin %i) received hotplug event.\n",
-				      drm_get_connector_name(connector), intel_encoder->hpd_pin);
+				      connector->name, intel_encoder->hpd_pin);
 		}
 	}
 	 /* if there were no outputs to poll, poll was disabled,
@@ -4321,7 +4321,7 @@ static void intel_hpd_irq_reenable(unsigned long data)
 			if (intel_connector->encoder->hpd_pin == i) {
 				if (connector->polled != intel_connector->polled)
 					DRM_DEBUG_DRIVER("Reenabling HPD on connector %s\n",
-							 drm_get_connector_name(connector));
+							 connector->name);
 				connector->polled = intel_connector->polled;
 				if (!connector->polled)
 					connector->polled = DRM_CONNECTOR_POLL_HPD;

drivers/gpu/drm/i915/intel_crt.c

@@ -634,7 +634,7 @@ intel_crt_detect(struct drm_connector *connector, bool force)
 	intel_runtime_pm_get(dev_priv);
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] force=%d\n",
-		      connector->base.id, drm_get_connector_name(connector),
+		      connector->base.id, connector->name,
 		      force);
 
 	power_domain = intel_display_port_power_domain(intel_encoder);

drivers/gpu/drm/i915/intel_display.c

@@ -4929,7 +4929,7 @@ static void intel_connector_check_state(struct intel_connector *connector)
 
 		DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
 			      connector->base.base.id,
-			      drm_get_connector_name(&connector->base));
+			      connector->base.name);
 
 		WARN(connector->base.dpms == DRM_MODE_DPMS_OFF,
 		     "wrong connector dpms state\n");
@@ -7853,7 +7853,7 @@ void intel_write_eld(struct drm_encoder *encoder,
 
 	DRM_DEBUG_DRIVER("ELD on [CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
 			 connector->base.id,
-			 drm_get_connector_name(connector),
+			 connector->name,
 			 connector->encoder->base.id,
 			 drm_get_encoder_name(connector->encoder));
 
@@ -8320,7 +8320,7 @@ bool intel_get_load_detect_pipe(struct drm_connector *connector,
 	int i = -1;
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
-		      connector->base.id, drm_get_connector_name(connector),
+		      connector->base.id, connector->name,
 		      encoder->base.id, drm_get_encoder_name(encoder));
 
 	/*
@@ -8432,7 +8432,7 @@ void intel_release_load_detect_pipe(struct drm_connector *connector,
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
-		      connector->base.id, drm_get_connector_name(connector),
+		      connector->base.id, connector->name,
 		      encoder->base.id, drm_get_encoder_name(encoder));
 
 	if (old->load_detect_temp) {
@@ -9404,7 +9404,7 @@ connected_sink_compute_bpp(struct intel_connector *connector,
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp constrains\n",
 		connector->base.base.id,
-		drm_get_connector_name(&connector->base));
+		connector->base.name);
 
 	/* Don't use an invalid EDID bpc value */
 	if (connector->base.display_info.bpc &&
@@ -10617,7 +10617,7 @@ intel_modeset_stage_output_state(struct drm_device *dev,
 
 			DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [NOCRTC]\n",
 				connector->base.base.id,
-				drm_get_connector_name(&connector->base));
+				connector->base.name);
 		}
 
 
@@ -10652,7 +10652,7 @@ intel_modeset_stage_output_state(struct drm_device *dev,
 
 		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] to [CRTC:%d]\n",
 			connector->base.base.id,
-			drm_get_connector_name(&connector->base),
+			connector->base.name,
 			new_crtc->base.id);
 	}
 
@@ -12103,7 +12103,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev)
 		}
 		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
 			      connector->base.base.id,
-			      drm_get_connector_name(&connector->base),
+			      connector->base.name,
 			      connector->base.encoder ? "enabled" : "disabled");
 	}
 }

drivers/gpu/drm/i915/intel_dp.c

@@ -3453,7 +3453,7 @@ intel_dp_detect(struct drm_connector *connector, bool force)
 	intel_display_power_get(dev_priv, power_domain);
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
-		      connector->base.id, drm_get_connector_name(connector));
+		      connector->base.id, connector->name);
 
 	intel_dp->has_audio = false;
 

drivers/gpu/drm/i915/intel_dvo.c

@@ -343,7 +343,7 @@ intel_dvo_detect(struct drm_connector *connector, bool force)
 {
 	struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
-		      connector->base.id, drm_get_connector_name(connector));
+		      connector->base.id, connector->name);
 	return intel_dvo->dev.dev_ops->detect(&intel_dvo->dev);
 }
 

drivers/gpu/drm/i915/intel_fbdev.c

@@ -344,14 +344,14 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
 
 		if (!enabled[i]) {
 			DRM_DEBUG_KMS("connector %s not enabled, skipping\n",
-				      drm_get_connector_name(connector));
+				      connector->name);
 			continue;
 		}
 
 		encoder = connector->encoder;
 		if (!encoder || WARN_ON(!encoder->crtc)) {
 			DRM_DEBUG_KMS("connector %s has no encoder or crtc, skipping\n",
-				      drm_get_connector_name(connector));
+				      connector->name);
 			enabled[i] = false;
 			continue;
 		}
@@ -374,7 +374,7 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
 		}
 
 		DRM_DEBUG_KMS("looking for cmdline mode on connector %s\n",
-			      drm_get_connector_name(connector));
+			      connector->name);
 
 		/* go for command line mode first */
 		modes[i] = drm_pick_cmdline_mode(fb_conn, width, height);
@@ -382,7 +382,7 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
 		/* try for preferred next */
 		if (!modes[i]) {
 			DRM_DEBUG_KMS("looking for preferred mode on connector %s\n",
-				      drm_get_connector_name(connector));
+				      connector->name);
 			modes[i] = drm_has_preferred_mode(fb_conn, width,
 							  height);
 		}
@@ -401,7 +401,7 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
 			 * something we own.
 			 */
 			DRM_DEBUG_KMS("looking for current mode on connector %s\n",
-				      drm_get_connector_name(connector));
+				      connector->name);
 			intel_mode_from_pipe_config(&encoder->crtc->hwmode,
 						    &to_intel_crtc(encoder->crtc)->config);
 			modes[i] = &encoder->crtc->hwmode;
@@ -409,7 +409,7 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
 		crtcs[i] = new_crtc;
 
 		DRM_DEBUG_KMS("connector %s on pipe %d [CRTC:%d]: %dx%d%s\n",
-			      drm_get_connector_name(connector),
+			      connector->name,
 			      pipe_name(to_intel_crtc(encoder->crtc)->pipe),
 			      encoder->crtc->base.id,
 			      modes[i]->hdisplay, modes[i]->vdisplay,

drivers/gpu/drm/i915/intel_hdmi.c

@@ -973,7 +973,7 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
 	enum drm_connector_status status = connector_status_disconnected;
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
-		      connector->base.id, drm_get_connector_name(connector));
+		      connector->base.id, connector->name);
 
 	power_domain = intel_display_port_power_domain(intel_encoder);
 	intel_display_power_get(dev_priv, power_domain);

drivers/gpu/drm/i915/intel_lvds.c

@@ -334,7 +334,7 @@ intel_lvds_detect(struct drm_connector *connector, bool force)
 	enum drm_connector_status status;
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
-		      connector->base.id, drm_get_connector_name(connector));
+		      connector->base.id, connector->name);
 
 	status = intel_panel_detect(dev);
 	if (status != connector_status_unknown)

drivers/gpu/drm/i915/intel_panel.c

@@ -1130,7 +1130,7 @@ int intel_panel_setup_backlight(struct drm_connector *connector)
 
 	if (ret) {
 		DRM_DEBUG_KMS("failed to setup backlight for connector %s\n",
-			      drm_get_connector_name(connector));
+			      connector->name);
 		return ret;
 	}
 

drivers/gpu/drm/i915/intel_sdvo.c

@@ -1743,7 +1743,7 @@ intel_sdvo_detect(struct drm_connector *connector, bool force)
 	enum drm_connector_status ret;
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
-		      connector->base.id, drm_get_connector_name(connector));
+		      connector->base.id, connector->name);
 
 	if (!intel_sdvo_get_value(intel_sdvo,
 				  SDVO_CMD_GET_ATTACHED_DISPLAYS,
@@ -1805,7 +1805,7 @@ static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
 	struct edid *edid;
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
-		      connector->base.id, drm_get_connector_name(connector));
+		      connector->base.id, connector->name);
 
 	/* set the bus switch and get the modes */
 	edid = intel_sdvo_get_edid(connector);
@@ -1903,7 +1903,7 @@ static void intel_sdvo_get_tv_modes(struct drm_connector *connector)
 	int i;
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
-		      connector->base.id, drm_get_connector_name(connector));
+		      connector->base.id, connector->name);
 
 	/* Read the list of supported input resolutions for the selected TV
 	 * format.
@@ -1940,7 +1940,7 @@ static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
 	struct drm_display_mode *newmode;
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
-		      connector->base.id, drm_get_connector_name(connector));
+		      connector->base.id, connector->name);
 
 	/*
 	 * Fetch modes from VBT. For SDVO prefer the VBT mode since some

drivers/gpu/drm/i915/intel_tv.c

@@ -1314,7 +1314,7 @@ intel_tv_detect(struct drm_connector *connector, bool force)
 	int type;
 
 	DRM_DEBUG_KMS("[CONNECTOR:%d:%s] force=%d\n",
-		      connector->base.id, drm_get_connector_name(connector),
+		      connector->base.id, connector->name,
 		      force);
 
 	mode = reported_modes[0];