i40e: Enable ADq and create queue channel/s on VF
This patch enables ADq and creates queue channels on a VF. An ADq enabled VF can have up to 4 VSIs and each one of them represents a traffic class and this is termed as a queue channel. Each of these VSIs can have up to 4 queues. This patch services the request for enabling ADq and adds queue channel based on the TC mqprio info provided by the user in the VF. Initially a check is made to see if spoof check is OFF, if not ADq will not be enabled. PF notifies VF for a reset in order to complete the creation of ADq resources i.e. creation of additional VSIs and allocation of queues as per TC information, all in the reset path. Steps: ====== 1. Turn off the spoof check 2. Enable ADq using tc mqprio command with or without rate limit. 3. Pass traffic. Example: ======== % ip link set dev eth0 vf 0 spoofchk off % tc qdisc add dev $iface root mqprio num_tc 4 map\ 0 0 0 0 1 1 1 1 2 2 2 2 3 3 3 3 queues\ 4@0 4@4 4@8 4@8 hw 1 mode channel Expected results: ================= 1. Total number of queues for the VF should be sum of queues of all TCs. 2. Traffic flow should be normal without errors. Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Showing
Please register or sign in to comment