Commit c29296ae authored by Matthew Dharm's avatar Matthew Dharm Committed by Greg Kroah-Hartman

[PATCH] USB storage: more cleanups

This patch (a) removes dead code, (b) renames some static functions with
names that are more apropriate for static functions, and (c) implements a
slave_configure() function.

With the patch I just sent to Linus (et al.) to fix the SCSI core to allow
slave_configure() to tweak (meaningfully) the two variables I need to set,
we'll be able to remove US_FL_MODE_XLATE.

(Well, actually, we also need to fix sr.c to respect the use_10_for_ms
flag, but that should be easy once the rest is done.)
parent 7344f494
......@@ -57,92 +57,29 @@
* Host functions
***********************************************************************/
static const char* usb_storage_info(struct Scsi_Host *host)
static const char* host_info(struct Scsi_Host *host)
{
return "SCSI emulation for USB Mass Storage devices";
}
#if 0
/* detect a virtual adapter (always works)
* Synchronization: 2.4: with the io_request_lock
* 2.5: no locks.
* fortunately we don't care.
* */
static int usb_storage_detect(struct SHT *sht)
static int slave_configure (struct scsi_device *sdev)
{
struct us_data *us;
char local_name[32];
/* This is not nice at all, but how else are we to get the
* data here? */
us = (struct us_data *)sht->proc_dir;
/* set device to use 10-byte commands where possible */
sdev->use_10_for_ms = 1;
sdev->use_10_for_rw = 1;
/* set up the name of our subdirectory under /proc/scsi/ */
sprintf(local_name, "usb-storage-%d", us->host_number);
sht->proc_name = kmalloc (strlen(local_name) + 1, GFP_ATOMIC);
if (!sht->proc_name)
return 0;
strcpy(sht->proc_name, local_name);
/* we start with no /proc directory entry */
sht->proc_dir = NULL;
/* register the host */
us->host = scsi_register(sht, sizeof(us));
if (us->host) {
struct usb_interface *iface;
us->host->hostdata[0] = (unsigned long)us;
us->host_no = us->host->host_no;
iface = usb_ifnum_to_if(us->pusb_dev, us->ifnum);
if (iface)
scsi_set_device(us->host, &iface->dev);
return 1;
}
/* odd... didn't register properly. Abort and free pointers */
kfree(sht->proc_name);
sht->proc_name = NULL;
/* this is to satisify the compiler, tho I don't think the
* return code is ever checked anywhere. */
return 0;
}
/* Release all resources used by the virtual host
*
* NOTE: There is no contention here, because we're already deregistered
* the driver and we're doing each virtual host in turn, not in parallel
* Synchronization: BKL, no spinlock.
*/
static int usb_storage_release(struct Scsi_Host *psh)
{
struct us_data *us = (struct us_data *)psh->hostdata[0];
US_DEBUGP("release() called for host %s\n", us->htmplt.name);
/* Kill the control threads
*
* Enqueue the command, wake up the thread, and wait for
* notification that it has exited.
*/
US_DEBUGP("-- sending exit command to thread\n");
BUG_ON(atomic_read(&us->sm_state) != US_STATE_IDLE);
us->srb = NULL;
up(&(us->sema));
wait_for_completion(&(us->notify));
/* remove the pointer to the data structure we were using */
(struct us_data*)psh->hostdata[0] = NULL;
/* we always have a successful release */
return 0;
}
#endif
/* queue a command */
/* This is always called with scsi_lock(srb->host) held */
static int usb_storage_queuecommand( Scsi_Cmnd *srb , void (*done)(Scsi_Cmnd *))
static int queuecommand( Scsi_Cmnd *srb , void (*done)(Scsi_Cmnd *))
{
struct us_data *us = (struct us_data *)srb->device->host->hostdata[0];
US_DEBUGP("queuecommand() called\n");
US_DEBUGP("%s called\n", __FUNCTION__);
srb->host_scribble = (unsigned char *)us;
/* enqueue the command */
......@@ -168,7 +105,7 @@ static int usb_storage_queuecommand( Scsi_Cmnd *srb , void (*done)(Scsi_Cmnd *))
/* Command abort */
/* This is always called with scsi_lock(srb->host) held */
static int usb_storage_command_abort( Scsi_Cmnd *srb )
static int command_abort( Scsi_Cmnd *srb )
{
struct Scsi_Host *host = srb->device->host;
struct us_data *us = (struct us_data *) host->hostdata[0];
......@@ -211,7 +148,7 @@ static int usb_storage_command_abort( Scsi_Cmnd *srb )
/* This invokes the transport reset mechanism to reset the state of the
* device */
/* This is always called with scsi_lock(srb->host) held */
static int usb_storage_device_reset( Scsi_Cmnd *srb )
static int device_reset( Scsi_Cmnd *srb )
{
struct us_data *us = (struct us_data *)srb->device->host->hostdata[0];
int result;
......@@ -242,7 +179,7 @@ static int usb_storage_device_reset( Scsi_Cmnd *srb )
/* It refuses to work if there's more than one interface in
* the device, so that other users are not affected. */
/* This is always called with scsi_lock(srb->host) held */
static int usb_storage_bus_reset( Scsi_Cmnd *srb )
static int bus_reset( Scsi_Cmnd *srb )
{
struct us_data *us = (struct us_data *)srb->device->host->hostdata[0];
int result;
......@@ -290,7 +227,7 @@ static int usb_storage_bus_reset( Scsi_Cmnd *srb )
#define SPRINTF(args...) \
do { if (pos < buffer+length) pos += sprintf(pos, ## args); } while (0)
static int usb_storage_proc_info (struct Scsi_Host *hostptr, char *buffer, char **start, off_t offset,
static int proc_info (struct Scsi_Host *hostptr, char *buffer, char **start, off_t offset,
int length, int inout)
{
struct us_data *us;
......@@ -352,9 +289,9 @@ struct SHT usb_stor_host_template = {
/* basic userland interface stuff */
.name = "usb-storage",
.proc_name = "usb-storage",
.proc_info = usb_storage_proc_info,
.proc_info = proc_info,
.proc_dir = NULL,
.info = usb_storage_info,
.info = host_info,
.ioctl = NULL,
/* old-style detect and release */
......@@ -363,12 +300,12 @@ struct SHT usb_stor_host_template = {
/* command interface -- queued only */
.command = NULL,
.queuecommand = usb_storage_queuecommand,
.queuecommand = queuecommand,
/* error and abort handlers */
.eh_abort_handler = usb_storage_command_abort,
.eh_device_reset_handler = usb_storage_device_reset,
.eh_bus_reset_handler = usb_storage_bus_reset,
.eh_abort_handler = command_abort,
.eh_device_reset_handler = device_reset,
.eh_bus_reset_handler = bus_reset,
.eh_host_reset_handler = NULL,
.eh_strategy_handler = NULL,
......@@ -384,7 +321,7 @@ struct SHT usb_stor_host_template = {
/* pre- and post- device scan functions */
.slave_alloc = NULL,
.slave_configure = NULL,
.slave_configure = slave_configure,
.slave_destroy = NULL,
/* lots of sg segments can be handled */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment