Commit c3168cab authored by Ganesh Goudar's avatar Ganesh Goudar Committed by David S. Miller

cxgb4/cxgbvf: Handle 32-bit fw port capabilities

Implement new 32-bit Firmware Port Capabilities in order to
handle new speeds which couldn't be represented in the old 16-bit
Firmware Port Capabilities values.

Based on the original work of Casey Leedom <leedom@chelsio.com>
Signed-off-by: default avatarGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 274043c6
......@@ -104,13 +104,13 @@ enum dev_state {
DEV_STATE_ERR
};
enum {
enum cc_pause {
PAUSE_RX = 1 << 0,
PAUSE_TX = 1 << 1,
PAUSE_AUTONEG = 1 << 2
};
enum {
enum cc_fec {
FEC_AUTO = 1 << 0, /* IEEE 802.3 "automatic" */
FEC_RS = 1 << 1, /* Reed-Solomon */
FEC_BASER_RS = 1 << 2 /* BaseR/Reed-Solomon */
......@@ -366,6 +366,7 @@ struct adapter_params {
unsigned int max_ordird_qp; /* Max read depth per RDMA QP */
unsigned int max_ird_adapter; /* Max read depth per adapter */
bool fr_nsmr_tpte_wr_support; /* FW support for FR_NSMR_TPTE_WR */
u8 fw_caps_support; /* 32-bit Port Capabilities */
/* MPS Buffer Group Map[per Port]. Bit i is set if buffer group i is
* used by the Port
......@@ -439,18 +440,34 @@ struct trace_params {
unsigned char port;
};
/* Firmware Port Capabilities types. */
typedef u16 fw_port_cap16_t; /* 16-bit Port Capabilities integral value */
typedef u32 fw_port_cap32_t; /* 32-bit Port Capabilities integral value */
enum fw_caps {
FW_CAPS_UNKNOWN = 0, /* 0'ed out initial state */
FW_CAPS16 = 1, /* old Firmware: 16-bit Port Capabilities */
FW_CAPS32 = 2, /* new Firmware: 32-bit Port Capabilities */
};
struct link_config {
unsigned short supported; /* link capabilities */
unsigned short advertising; /* advertised capabilities */
unsigned short lp_advertising; /* peer advertised capabilities */
unsigned int requested_speed; /* speed user has requested */
unsigned int speed; /* actual link speed */
unsigned char requested_fc; /* flow control user has requested */
unsigned char fc; /* actual link flow control */
unsigned char auto_fec; /* Forward Error Correction: */
unsigned char requested_fec; /* "automatic" (IEEE 802.3), */
unsigned char fec; /* requested, and actual in use */
fw_port_cap32_t pcaps; /* link capabilities */
fw_port_cap32_t def_acaps; /* default advertised capabilities */
fw_port_cap32_t acaps; /* advertised capabilities */
fw_port_cap32_t lpacaps; /* peer advertised capabilities */
fw_port_cap32_t speed_caps; /* speed(s) user has requested */
unsigned int speed; /* actual link speed (Mb/s) */
enum cc_pause requested_fc; /* flow control user has requested */
enum cc_pause fc; /* actual link flow control */
enum cc_fec requested_fec; /* Forward Error Correction: */
enum cc_fec fec; /* requested and actual in use */
unsigned char autoneg; /* autonegotiating? */
unsigned char link_ok; /* link up? */
unsigned char link_down_rc; /* link down reason */
};
......@@ -1580,6 +1597,8 @@ int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
int t4_sge_ctxt_flush(struct adapter *adap, unsigned int mbox);
void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl);
int t4_update_port_info(struct port_info *pi);
int t4_get_link_params(struct port_info *pi, unsigned int *link_okp,
unsigned int *speedp, unsigned int *mtup);
int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl);
void t4_db_full(struct adapter *adapter);
void t4_db_dropped(struct adapter *adapter);
......
......@@ -533,17 +533,23 @@ static int from_fw_port_mod_type(enum fw_port_type port_type,
static unsigned int speed_to_fw_caps(int speed)
{
if (speed == 100)
return FW_PORT_CAP_SPEED_100M;
return FW_PORT_CAP32_SPEED_100M;
if (speed == 1000)
return FW_PORT_CAP_SPEED_1G;
return FW_PORT_CAP32_SPEED_1G;
if (speed == 10000)
return FW_PORT_CAP_SPEED_10G;
return FW_PORT_CAP32_SPEED_10G;
if (speed == 25000)
return FW_PORT_CAP_SPEED_25G;
return FW_PORT_CAP32_SPEED_25G;
if (speed == 40000)
return FW_PORT_CAP_SPEED_40G;
return FW_PORT_CAP32_SPEED_40G;
if (speed == 50000)
return FW_PORT_CAP32_SPEED_50G;
if (speed == 100000)
return FW_PORT_CAP_SPEED_100G;
return FW_PORT_CAP32_SPEED_100G;
if (speed == 200000)
return FW_PORT_CAP32_SPEED_200G;
if (speed == 400000)
return FW_PORT_CAP32_SPEED_400G;
return 0;
}
......@@ -560,12 +566,13 @@ static void fw_caps_to_lmm(enum fw_port_type port_type,
unsigned int fw_caps,
unsigned long *link_mode_mask)
{
#define SET_LMM(__lmm_name) __set_bit(ETHTOOL_LINK_MODE_ ## __lmm_name \
## _BIT, link_mode_mask)
#define SET_LMM(__lmm_name) \
__set_bit(ETHTOOL_LINK_MODE_ ## __lmm_name ## _BIT, \
link_mode_mask)
#define FW_CAPS_TO_LMM(__fw_name, __lmm_name) \
do { \
if (fw_caps & FW_PORT_CAP_ ## __fw_name) \
if (fw_caps & FW_PORT_CAP32_ ## __fw_name) \
SET_LMM(__lmm_name); \
} while (0)
......@@ -645,7 +652,10 @@ static void fw_caps_to_lmm(enum fw_port_type port_type,
case FW_PORT_TYPE_KR4_100G:
case FW_PORT_TYPE_CR4_QSFP:
SET_LMM(FIBRE);
SET_LMM(100000baseCR4_Full);
FW_CAPS_TO_LMM(SPEED_40G, 40000baseSR4_Full);
FW_CAPS_TO_LMM(SPEED_25G, 25000baseCR_Full);
FW_CAPS_TO_LMM(SPEED_50G, 50000baseCR2_Full);
FW_CAPS_TO_LMM(SPEED_100G, 100000baseCR4_Full);
break;
default:
......@@ -663,8 +673,7 @@ static void fw_caps_to_lmm(enum fw_port_type port_type,
/**
* lmm_to_fw_caps - translate ethtool Link Mode Mask to Firmware
* capabilities
*
* @link_mode_mask: ethtool Link Mode Mask
* @et_lmm: ethtool Link Mode Mask
*
* Translate ethtool Link Mode Mask into a Firmware Port capabilities
* value.
......@@ -677,7 +686,7 @@ static unsigned int lmm_to_fw_caps(const unsigned long *link_mode_mask)
do { \
if (test_bit(ETHTOOL_LINK_MODE_ ## __lmm_name ## _BIT, \
link_mode_mask)) \
fw_caps |= FW_PORT_CAP_ ## __fw_name; \
fw_caps |= FW_PORT_CAP32_ ## __fw_name; \
} while (0)
LMM_TO_FW_CAPS(100baseT_Full, SPEED_100M);
......@@ -685,6 +694,7 @@ static unsigned int lmm_to_fw_caps(const unsigned long *link_mode_mask)
LMM_TO_FW_CAPS(10000baseT_Full, SPEED_10G);
LMM_TO_FW_CAPS(40000baseSR4_Full, SPEED_40G);
LMM_TO_FW_CAPS(25000baseCR_Full, SPEED_25G);
LMM_TO_FW_CAPS(50000baseCR2_Full, SPEED_50G);
LMM_TO_FW_CAPS(100000baseCR4_Full, SPEED_100G);
#undef LMM_TO_FW_CAPS
......@@ -698,10 +708,6 @@ static int get_link_ksettings(struct net_device *dev,
struct port_info *pi = netdev_priv(dev);
struct ethtool_link_settings *base = &link_ksettings->base;
ethtool_link_ksettings_zero_link_mode(link_ksettings, supported);
ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising);
ethtool_link_ksettings_zero_link_mode(link_ksettings, lp_advertising);
/* For the nonce, the Firmware doesn't send up Port State changes
* when the Virtual Interface attached to the Port is down. So
* if it's down, let's grab any changes.
......@@ -709,6 +715,10 @@ static int get_link_ksettings(struct net_device *dev,
if (!netif_running(dev))
(void)t4_update_port_info(pi);
ethtool_link_ksettings_zero_link_mode(link_ksettings, supported);
ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising);
ethtool_link_ksettings_zero_link_mode(link_ksettings, lp_advertising);
base->port = from_fw_port_mod_type(pi->port_type, pi->mod_type);
if (pi->mdio_addr >= 0) {
......@@ -721,11 +731,11 @@ static int get_link_ksettings(struct net_device *dev,
base->mdio_support = 0;
}
fw_caps_to_lmm(pi->port_type, pi->link_cfg.supported,
fw_caps_to_lmm(pi->port_type, pi->link_cfg.pcaps,
link_ksettings->link_modes.supported);
fw_caps_to_lmm(pi->port_type, pi->link_cfg.advertising,
fw_caps_to_lmm(pi->port_type, pi->link_cfg.acaps,
link_ksettings->link_modes.advertising);
fw_caps_to_lmm(pi->port_type, pi->link_cfg.lp_advertising,
fw_caps_to_lmm(pi->port_type, pi->link_cfg.lpacaps,
link_ksettings->link_modes.lp_advertising);
if (netif_carrier_ok(dev)) {
......@@ -736,8 +746,24 @@ static int get_link_ksettings(struct net_device *dev,
base->duplex = DUPLEX_UNKNOWN;
}
if (pi->link_cfg.fc & PAUSE_RX) {
if (pi->link_cfg.fc & PAUSE_TX) {
ethtool_link_ksettings_add_link_mode(link_ksettings,
advertising,
Pause);
} else {
ethtool_link_ksettings_add_link_mode(link_ksettings,
advertising,
Asym_Pause);
}
} else if (pi->link_cfg.fc & PAUSE_TX) {
ethtool_link_ksettings_add_link_mode(link_ksettings,
advertising,
Asym_Pause);
}
base->autoneg = pi->link_cfg.autoneg;
if (pi->link_cfg.supported & FW_PORT_CAP_ANEG)
if (pi->link_cfg.pcaps & FW_PORT_CAP32_ANEG)
ethtool_link_ksettings_add_link_mode(link_ksettings,
supported, Autoneg);
if (pi->link_cfg.autoneg)
......@@ -748,8 +774,7 @@ static int get_link_ksettings(struct net_device *dev,
}
static int set_link_ksettings(struct net_device *dev,
const struct ethtool_link_ksettings
*link_ksettings)
const struct ethtool_link_ksettings *link_ksettings)
{
struct port_info *pi = netdev_priv(dev);
struct link_config *lc = &pi->link_cfg;
......@@ -762,12 +787,12 @@ static int set_link_ksettings(struct net_device *dev,
if (base->duplex != DUPLEX_FULL)
return -EINVAL;
if (!(lc->supported & FW_PORT_CAP_ANEG)) {
if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) {
/* PHY offers a single speed. See if that's what's
* being requested.
*/
if (base->autoneg == AUTONEG_DISABLE &&
(lc->supported & speed_to_fw_caps(base->speed)))
(lc->pcaps & speed_to_fw_caps(base->speed)))
return 0;
return -EINVAL;
}
......@@ -776,18 +801,17 @@ static int set_link_ksettings(struct net_device *dev,
if (base->autoneg == AUTONEG_DISABLE) {
fw_caps = speed_to_fw_caps(base->speed);
if (!(lc->supported & fw_caps))
if (!(lc->pcaps & fw_caps))
return -EINVAL;
lc->requested_speed = fw_caps;
lc->advertising = 0;
lc->speed_caps = fw_caps;
lc->acaps = 0;
} else {
fw_caps =
lmm_to_fw_caps(link_ksettings->link_modes.advertising);
if (!(lc->supported & fw_caps))
lmm_to_fw_caps(link_ksettings->link_modes.advertising);
if (!(lc->pcaps & fw_caps))
return -EINVAL;
lc->requested_speed = 0;
lc->advertising = fw_caps | FW_PORT_CAP_ANEG;
lc->speed_caps = 0;
lc->acaps = fw_caps | FW_PORT_CAP32_ANEG;
}
lc->autoneg = base->autoneg;
......@@ -806,9 +830,9 @@ static inline unsigned int fwcap_to_eth_fec(unsigned int fw_fec)
{
unsigned int eth_fec = 0;
if (fw_fec & FW_PORT_CAP_FEC_RS)
if (fw_fec & FW_PORT_CAP32_FEC_RS)
eth_fec |= ETHTOOL_FEC_RS;
if (fw_fec & FW_PORT_CAP_FEC_BASER_RS)
if (fw_fec & FW_PORT_CAP32_FEC_BASER_RS)
eth_fec |= ETHTOOL_FEC_BASER;
/* if nothing is set, then FEC is off */
......@@ -864,7 +888,7 @@ static int get_fecparam(struct net_device *dev, struct ethtool_fecparam *fec)
* always support IEEE 802.3 "automatic" selection of Link FEC type if
* any FEC is supported.
*/
fec->fec = fwcap_to_eth_fec(lc->supported);
fec->fec = fwcap_to_eth_fec(lc->pcaps);
if (fec->fec != ETHTOOL_FEC_OFF)
fec->fec |= ETHTOOL_FEC_AUTO;
......@@ -917,7 +941,7 @@ static int set_pauseparam(struct net_device *dev,
if (epause->autoneg == AUTONEG_DISABLE)
lc->requested_fc = 0;
else if (lc->supported & FW_PORT_CAP_ANEG)
else if (lc->pcaps & FW_PORT_CAP32_ANEG)
lc->requested_fc = PAUSE_AUTONEG;
else
return -EINVAL;
......
......@@ -530,15 +530,22 @@ static int fwevtq_handler(struct sge_rspq *q, const __be64 *rsp,
FW_PORT_CMD_ACTION_G(ntohl(pcmd->action_to_len16));
if (cmd == FW_PORT_CMD &&
action == FW_PORT_ACTION_GET_PORT_INFO) {
(action == FW_PORT_ACTION_GET_PORT_INFO ||
action == FW_PORT_ACTION_GET_PORT_INFO32)) {
int port = FW_PORT_CMD_PORTID_G(
be32_to_cpu(pcmd->op_to_portid));
struct net_device *dev =
q->adap->port[q->adap->chan_map[port]];
int state_input = ((pcmd->u.info.dcbxdis_pkd &
FW_PORT_CMD_DCBXDIS_F)
? CXGB4_DCB_INPUT_FW_DISABLED
: CXGB4_DCB_INPUT_FW_ENABLED);
struct net_device *dev;
int dcbxdis, state_input;
dev = q->adap->port[q->adap->chan_map[port]];
dcbxdis = (action == FW_PORT_ACTION_GET_PORT_INFO
? !!(pcmd->u.info.dcbxdis_pkd &
FW_PORT_CMD_DCBXDIS_F)
: !!(pcmd->u.info32.lstatus32_to_cbllen32 &
FW_PORT_CMD_DCBXDIS32_F));
state_input = (dcbxdis
? CXGB4_DCB_INPUT_FW_DISABLED
: CXGB4_DCB_INPUT_FW_ENABLED);
cxgb4_dcb_state_fsm(dev, state_input);
}
......@@ -2672,11 +2679,10 @@ static int cxgb_set_vf_rate(struct net_device *dev, int vf, int min_tx_rate,
{
struct port_info *pi = netdev_priv(dev);
struct adapter *adap = pi->adapter;
struct fw_port_cmd port_cmd, port_rpl;
u32 link_status, speed = 0;
unsigned int link_ok, speed, mtu;
u32 fw_pfvf, fw_class;
int class_id = vf;
int link_ok, ret;
int ret;
u16 pktsize;
if (vf >= adap->num_vfs)
......@@ -2688,41 +2694,18 @@ static int cxgb_set_vf_rate(struct net_device *dev, int vf, int min_tx_rate,
min_tx_rate, vf);
return -EINVAL;
}
/* Retrieve link details for VF port */
memset(&port_cmd, 0, sizeof(port_cmd));
port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
FW_CMD_REQUEST_F |
FW_CMD_READ_F |
FW_PORT_CMD_PORTID_V(pi->port_id));
port_cmd.action_to_len16 =
cpu_to_be32(FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_GET_PORT_INFO) |
FW_LEN16(port_cmd));
ret = t4_wr_mbox(adap, adap->mbox, &port_cmd, sizeof(port_cmd),
&port_rpl);
ret = t4_get_link_params(pi, &link_ok, &speed, &mtu);
if (ret != FW_SUCCESS) {
dev_err(adap->pdev_dev,
"Failed to get link status for VF %d\n", vf);
"Failed to get link information for VF %d\n", vf);
return -EINVAL;
}
link_status = be32_to_cpu(port_rpl.u.info.lstatus_to_modtype);
link_ok = (link_status & FW_PORT_CMD_LSTATUS_F) != 0;
if (!link_ok) {
dev_err(adap->pdev_dev, "Link down for VF %d\n", vf);
return -EINVAL;
}
/* Determine link speed */
if (link_status & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M))
speed = 100;
else if (link_status & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G))
speed = 1000;
else if (link_status & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G))
speed = 10000;
else if (link_status & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G))
speed = 25000;
else if (link_status & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G))
speed = 40000;
else if (link_status & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G))
speed = 100000;
if (max_tx_rate > speed) {
dev_err(adap->pdev_dev,
......@@ -2730,7 +2713,8 @@ static int cxgb_set_vf_rate(struct net_device *dev, int vf, int min_tx_rate,
max_tx_rate, vf, speed);
return -EINVAL;
}
pktsize = be16_to_cpu(port_rpl.u.info.mtu);
pktsize = mtu;
/* subtract ethhdr size and 4 bytes crc since, f/w appends it */
pktsize = pktsize - sizeof(struct ethhdr) - 4;
/* subtract ipv4 hdr size, tcp hdr size to get typical IPv4 MSS size */
......@@ -2741,7 +2725,7 @@ static int cxgb_set_vf_rate(struct net_device *dev, int vf, int min_tx_rate,
SCHED_CLASS_MODE_CLASS,
SCHED_CLASS_RATEUNIT_BITS,
SCHED_CLASS_RATEMODE_ABS,
pi->port_id, class_id, 0,
pi->tx_chan, class_id, 0,
max_tx_rate * 1000, 0, pktsize);
if (ret) {
dev_err(adap->pdev_dev, "Err %d for Traffic Class config\n",
......@@ -4208,8 +4192,9 @@ static inline bool is_x_10g_port(const struct link_config *lc)
{
unsigned int speeds, high_speeds;
speeds = FW_PORT_CAP_SPEED_V(FW_PORT_CAP_SPEED_G(lc->supported));
high_speeds = speeds & ~(FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G);
speeds = FW_PORT_CAP32_SPEED_V(FW_PORT_CAP32_SPEED_G(lc->pcaps));
high_speeds = speeds &
~(FW_PORT_CAP32_SPEED_100M | FW_PORT_CAP32_SPEED_1G);
return high_speeds != 0;
}
......@@ -4590,18 +4575,24 @@ static void print_port_info(const struct net_device *dev)
else if (adap->params.pci.speed == PCI_EXP_LNKSTA_CLS_8_0GB)
spd = " 8 GT/s";
if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100M)
if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_100M)
bufp += sprintf(bufp, "100M/");
if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_1G)
if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_1G)
bufp += sprintf(bufp, "1G/");
if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_10G)
if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_10G)
bufp += sprintf(bufp, "10G/");
if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_25G)
if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_25G)
bufp += sprintf(bufp, "25G/");
if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_40G)
if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_40G)
bufp += sprintf(bufp, "40G/");
if (pi->link_cfg.supported & FW_PORT_CAP_SPEED_100G)
if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_50G)
bufp += sprintf(bufp, "50G/");
if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_100G)
bufp += sprintf(bufp, "100G/");
if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_200G)
bufp += sprintf(bufp, "200G/");
if (pi->link_cfg.pcaps & FW_PORT_CAP32_SPEED_400G)
bufp += sprintf(bufp, "400G/");
if (bufp != buf)
--bufp;
sprintf(bufp, "BASE-%s", t4_get_port_type_description(pi->port_type));
......@@ -4707,10 +4698,11 @@ static int config_mgmt_dev(struct pci_dev *pdev)
pi = netdev_priv(netdev);
pi->adapter = adap;
pi->port_id = adap->pf % adap->params.nports;
pi->tx_chan = adap->pf % adap->params.nports;
SET_NETDEV_DEV(netdev, &pdev->dev);
adap->port[0] = netdev;
pi->port_id = 0;
err = register_netdev(adap->port[0]);
if (err) {
......
......@@ -3835,59 +3835,133 @@ void t4_ulprx_read_la(struct adapter *adap, u32 *la_buf)
}
}
#define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\
FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_25G | \
FW_PORT_CAP_SPEED_40G | FW_PORT_CAP_SPEED_100G | \
FW_PORT_CAP_ANEG)
#define ADVERT_MASK (FW_PORT_CAP32_SPEED_V(FW_PORT_CAP32_SPEED_M) | \
FW_PORT_CAP32_ANEG)
/**
* fwcaps16_to_caps32 - convert 16-bit Port Capabilities to 32-bits
* @caps16: a 16-bit Port Capabilities value
*
* Returns the equivalent 32-bit Port Capabilities value.
*/
static fw_port_cap32_t fwcaps16_to_caps32(fw_port_cap16_t caps16)
{
fw_port_cap32_t caps32 = 0;
#define CAP16_TO_CAP32(__cap) \
do { \
if (caps16 & FW_PORT_CAP_##__cap) \
caps32 |= FW_PORT_CAP32_##__cap; \
} while (0)
CAP16_TO_CAP32(SPEED_100M);
CAP16_TO_CAP32(SPEED_1G);
CAP16_TO_CAP32(SPEED_25G);
CAP16_TO_CAP32(SPEED_10G);
CAP16_TO_CAP32(SPEED_40G);
CAP16_TO_CAP32(SPEED_100G);
CAP16_TO_CAP32(FC_RX);
CAP16_TO_CAP32(FC_TX);
CAP16_TO_CAP32(ANEG);
CAP16_TO_CAP32(MDIX);
CAP16_TO_CAP32(MDIAUTO);
CAP16_TO_CAP32(FEC_RS);
CAP16_TO_CAP32(FEC_BASER_RS);
CAP16_TO_CAP32(802_3_PAUSE);
CAP16_TO_CAP32(802_3_ASM_DIR);
#undef CAP16_TO_CAP32
return caps32;
}
/**
* fwcaps32_to_caps16 - convert 32-bit Port Capabilities to 16-bits
* @caps32: a 32-bit Port Capabilities value
*
* Returns the equivalent 16-bit Port Capabilities value. Note that
* not all 32-bit Port Capabilities can be represented in the 16-bit
* Port Capabilities and some fields/values may not make it.
*/
static fw_port_cap16_t fwcaps32_to_caps16(fw_port_cap32_t caps32)
{
fw_port_cap16_t caps16 = 0;
#define CAP32_TO_CAP16(__cap) \
do { \
if (caps32 & FW_PORT_CAP32_##__cap) \
caps16 |= FW_PORT_CAP_##__cap; \
} while (0)
CAP32_TO_CAP16(SPEED_100M);
CAP32_TO_CAP16(SPEED_1G);
CAP32_TO_CAP16(SPEED_10G);
CAP32_TO_CAP16(SPEED_25G);
CAP32_TO_CAP16(SPEED_40G);
CAP32_TO_CAP16(SPEED_100G);
CAP32_TO_CAP16(FC_RX);
CAP32_TO_CAP16(FC_TX);
CAP32_TO_CAP16(802_3_PAUSE);
CAP32_TO_CAP16(802_3_ASM_DIR);
CAP32_TO_CAP16(ANEG);
CAP32_TO_CAP16(MDIX);
CAP32_TO_CAP16(MDIAUTO);
CAP32_TO_CAP16(FEC_RS);
CAP32_TO_CAP16(FEC_BASER_RS);
#undef CAP32_TO_CAP16
return caps16;
}
/* Translate Firmware Port Capabilities Pause specification to Common Code */
static inline unsigned int fwcap_to_cc_pause(unsigned int fw_pause)
static inline enum cc_pause fwcap_to_cc_pause(fw_port_cap32_t fw_pause)
{
unsigned int cc_pause = 0;
enum cc_pause cc_pause = 0;
if (fw_pause & FW_PORT_CAP_FC_RX)
if (fw_pause & FW_PORT_CAP32_FC_RX)
cc_pause |= PAUSE_RX;
if (fw_pause & FW_PORT_CAP_FC_TX)
if (fw_pause & FW_PORT_CAP32_FC_TX)
cc_pause |= PAUSE_TX;
return cc_pause;
}
/* Translate Common Code Pause specification into Firmware Port Capabilities */
static inline unsigned int cc_to_fwcap_pause(unsigned int cc_pause)
static inline fw_port_cap32_t cc_to_fwcap_pause(enum cc_pause cc_pause)
{
unsigned int fw_pause = 0;
fw_port_cap32_t fw_pause = 0;
if (cc_pause & PAUSE_RX)
fw_pause |= FW_PORT_CAP_FC_RX;
fw_pause |= FW_PORT_CAP32_FC_RX;
if (cc_pause & PAUSE_TX)
fw_pause |= FW_PORT_CAP_FC_TX;
fw_pause |= FW_PORT_CAP32_FC_TX;
return fw_pause;
}
/* Translate Firmware Forward Error Correction specification to Common Code */
static inline unsigned int fwcap_to_cc_fec(unsigned int fw_fec)
static inline enum cc_fec fwcap_to_cc_fec(fw_port_cap32_t fw_fec)
{
unsigned int cc_fec = 0;
enum cc_fec cc_fec = 0;
if (fw_fec & FW_PORT_CAP_FEC_RS)
if (fw_fec & FW_PORT_CAP32_FEC_RS)
cc_fec |= FEC_RS;
if (fw_fec & FW_PORT_CAP_FEC_BASER_RS)
if (fw_fec & FW_PORT_CAP32_FEC_BASER_RS)
cc_fec |= FEC_BASER_RS;
return cc_fec;
}
/* Translate Common Code Forward Error Correction specification to Firmware */
static inline unsigned int cc_to_fwcap_fec(unsigned int cc_fec)
static inline fw_port_cap32_t cc_to_fwcap_fec(enum cc_fec cc_fec)
{
unsigned int fw_fec = 0;
fw_port_cap32_t fw_fec = 0;
if (cc_fec & FEC_RS)
fw_fec |= FW_PORT_CAP_FEC_RS;
fw_fec |= FW_PORT_CAP32_FEC_RS;
if (cc_fec & FEC_BASER_RS)
fw_fec |= FW_PORT_CAP_FEC_BASER_RS;
fw_fec |= FW_PORT_CAP32_FEC_BASER_RS;
return fw_fec;
}
......@@ -3906,13 +3980,13 @@ static inline unsigned int cc_to_fwcap_fec(unsigned int cc_fec)
* - If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
* otherwise do it later based on the outcome of auto-negotiation.
*/
int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port,
struct link_config *lc)
int t4_link_l1cfg(struct adapter *adapter, unsigned int mbox,
unsigned int port, struct link_config *lc)
{
struct fw_port_cmd c;
unsigned int fw_mdi = FW_PORT_CAP_MDI_V(FW_PORT_CAP_MDI_AUTO);
unsigned int fw_fc, cc_fec, fw_fec;
unsigned int rcap;
unsigned int fw_caps = adapter->params.fw_caps_support;
struct fw_port_cmd cmd;
unsigned int fw_mdi = FW_PORT_CAP32_MDI_V(FW_PORT_CAP32_MDI_AUTO);
fw_port_cap32_t fw_fc, cc_fec, fw_fec, rcap;
lc->link_ok = 0;
......@@ -3929,36 +4003,41 @@ int t4_link_l1cfg(struct adapter *adap, unsigned int mbox, unsigned int port,
* use whatever is in the current Requested FEC settings.
*/
if (lc->requested_fec & FEC_AUTO)
cc_fec = lc->auto_fec;
cc_fec = fwcap_to_cc_fec(lc->def_acaps);
else
cc_fec = lc->requested_fec;
fw_fec = cc_to_fwcap_fec(cc_fec);
/* Figure out what our Requested Port Capabilities are going to be.
*/
if (!(lc->supported & FW_PORT_CAP_ANEG)) {
rcap = (lc->supported & ADVERT_MASK) | fw_fc | fw_fec;
lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) {
rcap = (lc->pcaps & ADVERT_MASK) | fw_fc | fw_fec;
lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
lc->fec = cc_fec;
} else if (lc->autoneg == AUTONEG_DISABLE) {
rcap = lc->requested_speed | fw_fc | fw_fec | fw_mdi;
lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
rcap = lc->speed_caps | fw_fc | fw_fec | fw_mdi;
lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
lc->fec = cc_fec;
} else {
rcap = lc->advertising | fw_fc | fw_fec | fw_mdi;
rcap = lc->acaps | fw_fc | fw_fec | fw_mdi;
}
/* And send that on to the Firmware ...
*/
memset(&c, 0, sizeof(c));
c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
FW_PORT_CMD_PORTID_V(port));
c.action_to_len16 =
cpu_to_be32(FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_L1_CFG) |
FW_LEN16(c));
c.u.l1cfg.rcap = cpu_to_be32(rcap);
return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
memset(&cmd, 0, sizeof(cmd));
cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
FW_PORT_CMD_PORTID_V(port));
cmd.action_to_len16 =
cpu_to_be32(FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
? FW_PORT_ACTION_L1_CFG
: FW_PORT_ACTION_L1_CFG32) |
FW_LEN16(cmd));
if (fw_caps == FW_CAPS16)
cmd.u.l1cfg.rcap = cpu_to_be32(fwcaps32_to_caps16(rcap));
else
cmd.u.l1cfg32.rcap32 = cpu_to_be32(rcap);
return t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd), NULL);
}
/**
......@@ -3980,7 +4059,7 @@ int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port)
c.action_to_len16 =
cpu_to_be32(FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_L1_CFG) |
FW_LEN16(c));
c.u.l1cfg.rcap = cpu_to_be32(FW_PORT_CAP_ANEG);
c.u.l1cfg.rcap = cpu_to_be32(FW_PORT_CAP32_ANEG);
return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}
......@@ -7696,6 +7775,98 @@ static const char *t4_link_down_rc_str(unsigned char link_down_rc)
return reason[link_down_rc];
}
/**
* Return the highest speed set in the port capabilities, in Mb/s.
*/
static unsigned int fwcap_to_speed(fw_port_cap32_t caps)
{
#define TEST_SPEED_RETURN(__caps_speed, __speed) \
do { \
if (caps & FW_PORT_CAP32_SPEED_##__caps_speed) \
return __speed; \
} while (0)
TEST_SPEED_RETURN(400G, 400000);
TEST_SPEED_RETURN(200G, 200000);
TEST_SPEED_RETURN(100G, 100000);
TEST_SPEED_RETURN(50G, 50000);
TEST_SPEED_RETURN(40G, 40000);
TEST_SPEED_RETURN(25G, 25000);
TEST_SPEED_RETURN(10G, 10000);
TEST_SPEED_RETURN(1G, 1000);
TEST_SPEED_RETURN(100M, 100);
#undef TEST_SPEED_RETURN
return 0;
}
/**
* fwcap_to_fwspeed - return highest speed in Port Capabilities
* @acaps: advertised Port Capabilities
*
* Get the highest speed for the port from the advertised Port
* Capabilities. It will be either the highest speed from the list of
* speeds or whatever user has set using ethtool.
*/
static fw_port_cap32_t fwcap_to_fwspeed(fw_port_cap32_t acaps)
{
#define TEST_SPEED_RETURN(__caps_speed) \
do { \
if (acaps & FW_PORT_CAP32_SPEED_##__caps_speed) \
return FW_PORT_CAP32_SPEED_##__caps_speed; \
} while (0)
TEST_SPEED_RETURN(400G);
TEST_SPEED_RETURN(200G);
TEST_SPEED_RETURN(100G);
TEST_SPEED_RETURN(50G);
TEST_SPEED_RETURN(40G);
TEST_SPEED_RETURN(25G);
TEST_SPEED_RETURN(10G);
TEST_SPEED_RETURN(1G);
TEST_SPEED_RETURN(100M);
#undef TEST_SPEED_RETURN
return 0;
}
/**
* lstatus_to_fwcap - translate old lstatus to 32-bit Port Capabilities
* @lstatus: old FW_PORT_ACTION_GET_PORT_INFO lstatus value
*
* Translates old FW_PORT_ACTION_GET_PORT_INFO lstatus field into new
* 32-bit Port Capabilities value.
*/
static fw_port_cap32_t lstatus_to_fwcap(u32 lstatus)
{
fw_port_cap32_t linkattr = 0;
/* Unfortunately the format of the Link Status in the old
* 16-bit Port Information message isn't the same as the
* 16-bit Port Capabilities bitfield used everywhere else ...
*/
if (lstatus & FW_PORT_CMD_RXPAUSE_F)
linkattr |= FW_PORT_CAP32_FC_RX;
if (lstatus & FW_PORT_CMD_TXPAUSE_F)
linkattr |= FW_PORT_CAP32_FC_TX;
if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M))
linkattr |= FW_PORT_CAP32_SPEED_100M;
if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G))
linkattr |= FW_PORT_CAP32_SPEED_1G;
if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G))
linkattr |= FW_PORT_CAP32_SPEED_10G;
if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G))
linkattr |= FW_PORT_CAP32_SPEED_25G;
if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G))
linkattr |= FW_PORT_CAP32_SPEED_40G;
if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G))
linkattr |= FW_PORT_CAP32_SPEED_100G;
return linkattr;
}
/**
* t4_handle_get_port_info - process a FW reply message
* @pi: the port info
......@@ -7705,76 +7876,123 @@ static const char *t4_link_down_rc_str(unsigned char link_down_rc)
*/
void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
{
const struct fw_port_cmd *p = (const void *)rpl;
unsigned int acaps = be16_to_cpu(p->u.info.acap);
struct adapter *adap = pi->adapter;
/* link/module state change message */
int speed = 0, fc, fec;
struct link_config *lc;
u32 stat = be32_to_cpu(p->u.info.lstatus_to_modtype);
int link_ok = (stat & FW_PORT_CMD_LSTATUS_F) != 0;
u32 mod = FW_PORT_CMD_MODTYPE_G(stat);
/* Unfortunately the format of the Link Status returned by the
* Firmware isn't the same as the Firmware Port Capabilities bitfield
* used everywhere else ...
const struct fw_port_cmd *cmd = (const void *)rpl;
int action = FW_PORT_CMD_ACTION_G(be32_to_cpu(cmd->action_to_len16));
struct adapter *adapter = pi->adapter;
struct link_config *lc = &pi->link_cfg;
int link_ok, linkdnrc;
enum fw_port_type port_type;
enum fw_port_module_type mod_type;
unsigned int speed, fc, fec;
fw_port_cap32_t pcaps, acaps, lpacaps, linkattr;
/* Extract the various fields from the Port Information message.
*/
fc = 0;
if (stat & FW_PORT_CMD_RXPAUSE_F)
fc |= PAUSE_RX;
if (stat & FW_PORT_CMD_TXPAUSE_F)
fc |= PAUSE_TX;
switch (action) {
case FW_PORT_ACTION_GET_PORT_INFO: {
u32 lstatus = be32_to_cpu(cmd->u.info.lstatus_to_modtype);
link_ok = (lstatus & FW_PORT_CMD_LSTATUS_F) != 0;
linkdnrc = FW_PORT_CMD_LINKDNRC_G(lstatus);
port_type = FW_PORT_CMD_PTYPE_G(lstatus);
mod_type = FW_PORT_CMD_MODTYPE_G(lstatus);
pcaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.pcap));
acaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.acap));
lpacaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.lpacap));
linkattr = lstatus_to_fwcap(lstatus);
break;
}
case FW_PORT_ACTION_GET_PORT_INFO32: {
u32 lstatus32;
lstatus32 = be32_to_cpu(cmd->u.info32.lstatus32_to_cbllen32);
link_ok = (lstatus32 & FW_PORT_CMD_LSTATUS32_F) != 0;
linkdnrc = FW_PORT_CMD_LINKDNRC32_G(lstatus32);
port_type = FW_PORT_CMD_PORTTYPE32_G(lstatus32);
mod_type = FW_PORT_CMD_MODTYPE32_G(lstatus32);
pcaps = be32_to_cpu(cmd->u.info32.pcaps32);
acaps = be32_to_cpu(cmd->u.info32.acaps32);
lpacaps = be32_to_cpu(cmd->u.info32.lpacaps32);
linkattr = be32_to_cpu(cmd->u.info32.linkattr32);
break;
}
default:
dev_err(adapter->pdev_dev, "Handle Port Information: Bad Command/Action %#x\n",
be32_to_cpu(cmd->action_to_len16));
return;
}
fec = fwcap_to_cc_fec(acaps);
fc = fwcap_to_cc_pause(linkattr);
speed = fwcap_to_speed(linkattr);
if (mod_type != pi->mod_type) {
/* With the newer SFP28 and QSFP28 Transceiver Module Types,
* various fundamental Port Capabilities which used to be
* immutable can now change radically. We can now have
* Speeds, Auto-Negotiation, Forward Error Correction, etc.
* all change based on what Transceiver Module is inserted.
* So we need to record the Physical "Port" Capabilities on
* every Transceiver Module change.
*/
lc->pcaps = pcaps;
if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M))
speed = 100;
else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G))
speed = 1000;
else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G))
speed = 10000;
else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G))
speed = 25000;
else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G))
speed = 40000;
else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G))
speed = 100000;
lc = &pi->link_cfg;
if (mod != pi->mod_type) {
/* When a new Transceiver Module is inserted, the Firmware
* will examine any Forward Error Correction parameters
* present in the Transceiver Module i2c EPROM and determine
* the supported and recommended FEC settings from those
* based on IEEE 802.3 standards. We always record the
* IEEE 802.3 recommended "automatic" settings.
* will examine its i2c EPROM to determine its type and
* general operating parameters including things like Forward
* Error Control, etc. Various IEEE 802.3 standards dictate
* how to interpret these i2c values to determine default
* "sutomatic" settings. We record these for future use when
* the user explicitly requests these standards-based values.
*/
lc->auto_fec = fec;
lc->def_acaps = acaps;
/* Some versions of the early T6 Firmware "cheated" when
* handling different Transceiver Modules by changing the
* underlaying Port Type reported to the Host Drivers. As
* such we need to capture whatever Port Type the Firmware
* sends us and record it in case it's different from what we
* were told earlier. Unfortunately, since Firmware is
* forever, we'll need to keep this code here forever, but in
* later T6 Firmware it should just be an assignment of the
* same value already recorded.
*/
pi->port_type = port_type;
pi->mod_type = mod;
t4_os_portmod_changed(adap, pi->port_id);
pi->mod_type = mod_type;
t4_os_portmod_changed(adapter, pi->port_id);
}
if (link_ok != lc->link_ok || speed != lc->speed ||
fc != lc->fc || fec != lc->fec) { /* something changed */
if (!link_ok && lc->link_ok) {
unsigned char rc = FW_PORT_CMD_LINKDNRC_G(stat);
lc->link_down_rc = rc;
dev_warn(adap->pdev_dev,
"Port %d link down, reason: %s\n",
pi->port_id, t4_link_down_rc_str(rc));
lc->link_down_rc = linkdnrc;
dev_warn(adapter->pdev_dev, "Port %d link down, reason: %s\n",
pi->tx_chan, t4_link_down_rc_str(linkdnrc));
}
lc->link_ok = link_ok;
lc->speed = speed;
lc->fc = fc;
lc->fec = fec;
lc->supported = be16_to_cpu(p->u.info.pcap);
lc->lp_advertising = be16_to_cpu(p->u.info.lpacap);
lc->lpacaps = lpacaps;
lc->acaps = acaps & ADVERT_MASK;
if (lc->acaps & FW_PORT_CAP32_ANEG) {
lc->autoneg = AUTONEG_ENABLE;
} else {
/* When Autoneg is disabled, user needs to set
* single speed.
* Similar to cxgb4_ethtool.c: set_link_ksettings
*/
lc->acaps = 0;
lc->speed_caps = fwcap_to_fwspeed(acaps);
lc->autoneg = AUTONEG_DISABLE;
}
t4_os_link_changed(adap, pi->port_id, link_ok);
t4_os_link_changed(adapter, pi->port_id, link_ok);
}
}
......@@ -7788,15 +8006,18 @@ void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
*/
int t4_update_port_info(struct port_info *pi)
{
unsigned int fw_caps = pi->adapter->params.fw_caps_support;
struct fw_port_cmd port_cmd;
int ret;
memset(&port_cmd, 0, sizeof(port_cmd));
port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
FW_CMD_REQUEST_F | FW_CMD_READ_F |
FW_PORT_CMD_PORTID_V(pi->port_id));
FW_PORT_CMD_PORTID_V(pi->tx_chan));
port_cmd.action_to_len16 = cpu_to_be32(
FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_GET_PORT_INFO) |
FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
? FW_PORT_ACTION_GET_PORT_INFO
: FW_PORT_ACTION_GET_PORT_INFO32) |
FW_LEN16(port_cmd));
ret = t4_wr_mbox(pi->adapter, pi->adapter->mbox,
&port_cmd, sizeof(port_cmd), &port_cmd);
......@@ -7807,6 +8028,65 @@ int t4_update_port_info(struct port_info *pi)
return 0;
}
/**
* t4_get_link_params - retrieve basic link parameters for given port
* @pi: the port
* @link_okp: value return pointer for link up/down
* @speedp: value return pointer for speed (Mb/s)
* @mtup: value return pointer for mtu
*
* Retrieves basic link parameters for a port: link up/down, speed (Mb/s),
* and MTU for a specified port. A negative error is returned on
* failure; 0 on success.
*/
int t4_get_link_params(struct port_info *pi, unsigned int *link_okp,
unsigned int *speedp, unsigned int *mtup)
{
unsigned int fw_caps = pi->adapter->params.fw_caps_support;
struct fw_port_cmd port_cmd;
unsigned int action, link_ok, speed, mtu;
fw_port_cap32_t linkattr;
int ret;
memset(&port_cmd, 0, sizeof(port_cmd));
port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
FW_CMD_REQUEST_F | FW_CMD_READ_F |
FW_PORT_CMD_PORTID_V(pi->tx_chan));
action = (fw_caps == FW_CAPS16
? FW_PORT_ACTION_GET_PORT_INFO
: FW_PORT_ACTION_GET_PORT_INFO32);
port_cmd.action_to_len16 = cpu_to_be32(
FW_PORT_CMD_ACTION_V(action) |
FW_LEN16(port_cmd));
ret = t4_wr_mbox(pi->adapter, pi->adapter->mbox,
&port_cmd, sizeof(port_cmd), &port_cmd);
if (ret)
return ret;
if (action == FW_PORT_ACTION_GET_PORT_INFO) {
u32 lstatus = be32_to_cpu(port_cmd.u.info.lstatus_to_modtype);
link_ok = !!(lstatus & FW_PORT_CMD_LSTATUS_F);
linkattr = lstatus_to_fwcap(lstatus);
mtu = be16_to_cpu(port_cmd.u.info.mtu);
} else {
u32 lstatus32 =
be32_to_cpu(port_cmd.u.info32.lstatus32_to_cbllen32);
link_ok = !!(lstatus32 & FW_PORT_CMD_LSTATUS32_F);
linkattr = be32_to_cpu(port_cmd.u.info32.linkattr32);
mtu = FW_PORT_CMD_MTU32_G(
be32_to_cpu(port_cmd.u.info32.auxlinfo32_mtu32));
}
speed = fwcap_to_speed(linkattr);
*link_okp = link_ok;
*speedp = fwcap_to_speed(linkattr);
*mtup = mtu;
return 0;
}
/**
* t4_handle_fw_rpl - process a FW reply message
* @adap: the adapter
......@@ -7827,7 +8107,9 @@ int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl)
unsigned int action =
FW_PORT_CMD_ACTION_G(be32_to_cpu(p->action_to_len16));
if (opcode == FW_PORT_CMD && action == FW_PORT_ACTION_GET_PORT_INFO) {
if (opcode == FW_PORT_CMD &&
(action == FW_PORT_ACTION_GET_PORT_INFO ||
action == FW_PORT_ACTION_GET_PORT_INFO32)) {
int i;
int chan = FW_PORT_CMD_PORTID_G(be32_to_cpu(p->op_to_portid));
struct port_info *pi = NULL;
......@@ -7840,7 +8122,8 @@ int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl)
t4_handle_get_port_info(pi, rpl);
} else {
dev_warn(adap->pdev_dev, "Unknown firmware reply %d\n", opcode);
dev_warn(adap->pdev_dev, "Unknown firmware reply %d\n",
opcode);
return -EINVAL;
}
return 0;
......@@ -7859,35 +8142,35 @@ static void get_pci_mode(struct adapter *adapter, struct pci_params *p)
/**
* init_link_config - initialize a link's SW state
* @lc: structure holding the link state
* @lc: pointer to structure holding the link state
* @pcaps: link Port Capabilities
* @acaps: link current Advertised Port Capabilities
*
* Initializes the SW state maintained for each link, including the link's
* capabilities and default speed/flow-control/autonegotiation settings.
*/
static void init_link_config(struct link_config *lc, unsigned int pcaps,
unsigned int acaps)
static void init_link_config(struct link_config *lc, fw_port_cap32_t pcaps,
fw_port_cap32_t acaps)
{
lc->supported = pcaps;
lc->lp_advertising = 0;
lc->requested_speed = 0;
lc->pcaps = pcaps;
lc->def_acaps = acaps;
lc->lpacaps = 0;
lc->speed_caps = 0;
lc->speed = 0;
lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
/* For Forward Error Control, we default to whatever the Firmware
* tells us the Link is currently advertising.
*/
lc->auto_fec = fwcap_to_cc_fec(acaps);
lc->requested_fec = FEC_AUTO;
lc->fec = lc->auto_fec;
lc->fec = fwcap_to_cc_fec(lc->def_acaps);
if (lc->supported & FW_PORT_CAP_ANEG) {
lc->advertising = lc->supported & ADVERT_MASK;
if (lc->pcaps & FW_PORT_CAP32_ANEG) {
lc->acaps = lc->pcaps & ADVERT_MASK;
lc->autoneg = AUTONEG_ENABLE;
lc->requested_fc |= PAUSE_AUTONEG;
} else {
lc->advertising = 0;
lc->acaps = 0;
lc->autoneg = AUTONEG_DISABLE;
}
}
......@@ -8412,7 +8695,7 @@ int t4_init_rss_mode(struct adapter *adap, int mbox)
}
/**
* t4_init_portinfo - allocate a virtual interface amd initialize port_info
* t4_init_portinfo - allocate a virtual interface and initialize port_info
* @pi: the port_info
* @mbox: mailbox to use for the FW command
* @port: physical port associated with the VI
......@@ -8428,21 +8711,67 @@ int t4_init_rss_mode(struct adapter *adap, int mbox)
int t4_init_portinfo(struct port_info *pi, int mbox,
int port, int pf, int vf, u8 mac[])
{
int ret;
struct fw_port_cmd c;
struct adapter *adapter = pi->adapter;
unsigned int fw_caps = adapter->params.fw_caps_support;
struct fw_port_cmd cmd;
unsigned int rss_size;
enum fw_port_type port_type;
int mdio_addr;
fw_port_cap32_t pcaps, acaps;
int ret;
memset(&c, 0, sizeof(c));
c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
FW_CMD_REQUEST_F | FW_CMD_READ_F |
FW_PORT_CMD_PORTID_V(port));
c.action_to_len16 = cpu_to_be32(
FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_GET_PORT_INFO) |
FW_LEN16(c));
ret = t4_wr_mbox(pi->adapter, mbox, &c, sizeof(c), &c);
/* If we haven't yet determined whether we're talking to Firmware
* which knows the new 32-bit Port Capabilities, it's time to find
* out now. This will also tell new Firmware to send us Port Status
* Updates using the new 32-bit Port Capabilities version of the
* Port Information message.
*/
if (fw_caps == FW_CAPS_UNKNOWN) {
u32 param, val;
param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_PFVF) |
FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_PFVF_PORT_CAPS32));
val = 1;
ret = t4_set_params(adapter, mbox, pf, vf, 1, &param, &val);
fw_caps = (ret == 0 ? FW_CAPS32 : FW_CAPS16);
adapter->params.fw_caps_support = fw_caps;
}
memset(&cmd, 0, sizeof(cmd));
cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
FW_CMD_REQUEST_F | FW_CMD_READ_F |
FW_PORT_CMD_PORTID_V(port));
cmd.action_to_len16 = cpu_to_be32(
FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
? FW_PORT_ACTION_GET_PORT_INFO
: FW_PORT_ACTION_GET_PORT_INFO32) |
FW_LEN16(cmd));
ret = t4_wr_mbox(pi->adapter, mbox, &cmd, sizeof(cmd), &cmd);
if (ret)
return ret;
/* Extract the various fields from the Port Information message.
*/
if (fw_caps == FW_CAPS16) {
u32 lstatus = be32_to_cpu(cmd.u.info.lstatus_to_modtype);
port_type = FW_PORT_CMD_PTYPE_G(lstatus);
mdio_addr = ((lstatus & FW_PORT_CMD_MDIOCAP_F)
? FW_PORT_CMD_MDIOADDR_G(lstatus)
: -1);
pcaps = fwcaps16_to_caps32(be16_to_cpu(cmd.u.info.pcap));
acaps = fwcaps16_to_caps32(be16_to_cpu(cmd.u.info.acap));
} else {
u32 lstatus32 = be32_to_cpu(cmd.u.info32.lstatus32_to_cbllen32);
port_type = FW_PORT_CMD_PORTTYPE32_G(lstatus32);
mdio_addr = ((lstatus32 & FW_PORT_CMD_MDIOCAP32_F)
? FW_PORT_CMD_MDIOADDR32_G(lstatus32)
: -1);
pcaps = be32_to_cpu(cmd.u.info32.pcaps32);
acaps = be32_to_cpu(cmd.u.info32.acaps32);
}
ret = t4_alloc_vi(pi->adapter, mbox, port, pf, vf, 1, mac, &rss_size);
if (ret < 0)
return ret;
......@@ -8452,14 +8781,11 @@ int t4_init_portinfo(struct port_info *pi, int mbox,
pi->lport = port;
pi->rss_size = rss_size;
ret = be32_to_cpu(c.u.info.lstatus_to_modtype);
pi->mdio_addr = (ret & FW_PORT_CMD_MDIOCAP_F) ?
FW_PORT_CMD_MDIOADDR_G(ret) : -1;
pi->port_type = FW_PORT_CMD_PTYPE_G(ret);
pi->port_type = port_type;
pi->mdio_addr = mdio_addr;
pi->mod_type = FW_PORT_MOD_TYPE_NA;
init_link_config(&pi->link_cfg, be16_to_cpu(c.u.info.pcap),
be16_to_cpu(c.u.info.acap));
init_link_config(&pi->link_cfg, pcaps, acaps);
return 0;
}
......
......@@ -1173,7 +1173,8 @@ enum fw_params_param_pfvf {
FW_PARAMS_PARAM_PFVF_ACTIVE_FILTER_END = 0x2E,
FW_PARAMS_PARAM_PFVF_ETHOFLD_END = 0x30,
FW_PARAMS_PARAM_PFVF_CPLFW4MSG_ENCAP = 0x31,
FW_PARAMS_PARAM_PFVF_NCRYPTO_LOOKASIDE = 0x32
FW_PARAMS_PARAM_PFVF_NCRYPTO_LOOKASIDE = 0x32,
FW_PARAMS_PARAM_PFVF_PORT_CAPS32 = 0x3A,
};
/*
......@@ -2256,6 +2257,7 @@ struct fw_acl_vlan_cmd {
#define FW_ACL_VLAN_CMD_FM_S 6
#define FW_ACL_VLAN_CMD_FM_V(x) ((x) << FW_ACL_VLAN_CMD_FM_S)
/* old 16-bit port capabilities bitmap (fw_port_cap16_t) */
enum fw_port_cap {
FW_PORT_CAP_SPEED_100M = 0x0001,
FW_PORT_CAP_SPEED_1G = 0x0002,
......@@ -2291,6 +2293,84 @@ enum fw_port_mdi {
#define FW_PORT_CAP_MDI_S 9
#define FW_PORT_CAP_MDI_V(x) ((x) << FW_PORT_CAP_MDI_S)
/* new 32-bit port capabilities bitmap (fw_port_cap32_t) */
#define FW_PORT_CAP32_SPEED_100M 0x00000001UL
#define FW_PORT_CAP32_SPEED_1G 0x00000002UL
#define FW_PORT_CAP32_SPEED_10G 0x00000004UL
#define FW_PORT_CAP32_SPEED_25G 0x00000008UL
#define FW_PORT_CAP32_SPEED_40G 0x00000010UL
#define FW_PORT_CAP32_SPEED_50G 0x00000020UL
#define FW_PORT_CAP32_SPEED_100G 0x00000040UL
#define FW_PORT_CAP32_SPEED_200G 0x00000080UL
#define FW_PORT_CAP32_SPEED_400G 0x00000100UL
#define FW_PORT_CAP32_SPEED_RESERVED1 0x00000200UL
#define FW_PORT_CAP32_SPEED_RESERVED2 0x00000400UL
#define FW_PORT_CAP32_SPEED_RESERVED3 0x00000800UL
#define FW_PORT_CAP32_RESERVED1 0x0000f000UL
#define FW_PORT_CAP32_FC_RX 0x00010000UL
#define FW_PORT_CAP32_FC_TX 0x00020000UL
#define FW_PORT_CAP32_802_3_PAUSE 0x00040000UL
#define FW_PORT_CAP32_802_3_ASM_DIR 0x00080000UL
#define FW_PORT_CAP32_ANEG 0x00100000UL
#define FW_PORT_CAP32_MDIX 0x00200000UL
#define FW_PORT_CAP32_MDIAUTO 0x00400000UL
#define FW_PORT_CAP32_FEC_RS 0x00800000UL
#define FW_PORT_CAP32_FEC_BASER_RS 0x01000000UL
#define FW_PORT_CAP32_FEC_RESERVED1 0x02000000UL
#define FW_PORT_CAP32_FEC_RESERVED2 0x04000000UL
#define FW_PORT_CAP32_FEC_RESERVED3 0x08000000UL
#define FW_PORT_CAP32_RESERVED2 0xf0000000UL
#define FW_PORT_CAP32_SPEED_S 0
#define FW_PORT_CAP32_SPEED_M 0xfff
#define FW_PORT_CAP32_SPEED_V(x) ((x) << FW_PORT_CAP32_SPEED_S)
#define FW_PORT_CAP32_SPEED_G(x) \
(((x) >> FW_PORT_CAP32_SPEED_S) & FW_PORT_CAP32_SPEED_M)
#define FW_PORT_CAP32_FC_S 16
#define FW_PORT_CAP32_FC_M 0x3
#define FW_PORT_CAP32_FC_V(x) ((x) << FW_PORT_CAP32_FC_S)
#define FW_PORT_CAP32_FC_G(x) \
(((x) >> FW_PORT_CAP32_FC_S) & FW_PORT_CAP32_FC_M)
#define FW_PORT_CAP32_802_3_S 18
#define FW_PORT_CAP32_802_3_M 0x3
#define FW_PORT_CAP32_802_3_V(x) ((x) << FW_PORT_CAP32_802_3_S)
#define FW_PORT_CAP32_802_3_G(x) \
(((x) >> FW_PORT_CAP32_802_3_S) & FW_PORT_CAP32_802_3_M)
#define FW_PORT_CAP32_ANEG_S 20
#define FW_PORT_CAP32_ANEG_M 0x1
#define FW_PORT_CAP32_ANEG_V(x) ((x) << FW_PORT_CAP32_ANEG_S)
#define FW_PORT_CAP32_ANEG_G(x) \
(((x) >> FW_PORT_CAP32_ANEG_S) & FW_PORT_CAP32_ANEG_M)
enum fw_port_mdi32 {
FW_PORT_CAP32_MDI_UNCHANGED,
FW_PORT_CAP32_MDI_AUTO,
FW_PORT_CAP32_MDI_F_STRAIGHT,
FW_PORT_CAP32_MDI_F_CROSSOVER
};
#define FW_PORT_CAP32_MDI_S 21
#define FW_PORT_CAP32_MDI_M 3
#define FW_PORT_CAP32_MDI_V(x) ((x) << FW_PORT_CAP32_MDI_S)
#define FW_PORT_CAP32_MDI_G(x) \
(((x) >> FW_PORT_CAP32_MDI_S) & FW_PORT_CAP32_MDI_M)
#define FW_PORT_CAP32_FEC_S 23
#define FW_PORT_CAP32_FEC_M 0x1f
#define FW_PORT_CAP32_FEC_V(x) ((x) << FW_PORT_CAP32_FEC_S)
#define FW_PORT_CAP32_FEC_G(x) \
(((x) >> FW_PORT_CAP32_FEC_S) & FW_PORT_CAP32_FEC_M)
/* macros to isolate various 32-bit Port Capabilities sub-fields */
#define CAP32_SPEED(__cap32) \
(FW_PORT_CAP32_SPEED_V(FW_PORT_CAP32_SPEED_M) & __cap32)
#define CAP32_FEC(__cap32) \
(FW_PORT_CAP32_FEC_V(FW_PORT_CAP32_FEC_M) & __cap32)
enum fw_port_action {
FW_PORT_ACTION_L1_CFG = 0x0001,
FW_PORT_ACTION_L2_CFG = 0x0002,
......@@ -2300,6 +2380,8 @@ enum fw_port_action {
FW_PORT_ACTION_DCB_READ_TRANS = 0x0006,
FW_PORT_ACTION_DCB_READ_RECV = 0x0007,
FW_PORT_ACTION_DCB_READ_DET = 0x0008,
FW_PORT_ACTION_L1_CFG32 = 0x0009,
FW_PORT_ACTION_GET_PORT_INFO32 = 0x000a,
FW_PORT_ACTION_LOW_PWR_TO_NORMAL = 0x0010,
FW_PORT_ACTION_L1_LOW_PWR_EN = 0x0011,
FW_PORT_ACTION_L2_WOL_MODE_EN = 0x0012,
......@@ -2447,6 +2529,18 @@ struct fw_port_cmd {
__be64 r12;
} control;
} dcb;
struct fw_port_l1cfg32 {
__be32 rcap32;
__be32 r;
} l1cfg32;
struct fw_port_info32 {
__be32 lstatus32_to_cbllen32;
__be32 auxlinfo32_mtu32;
__be32 linkattr32;
__be32 pcaps32;
__be32 acaps32;
__be32 lpacaps32;
} info32;
} u;
};
......@@ -2555,6 +2649,85 @@ struct fw_port_cmd {
#define FW_PORT_CMD_DCB_VERSION_G(x) \
(((x) >> FW_PORT_CMD_DCB_VERSION_S) & FW_PORT_CMD_DCB_VERSION_M)
#define FW_PORT_CMD_LSTATUS32_S 31
#define FW_PORT_CMD_LSTATUS32_M 0x1
#define FW_PORT_CMD_LSTATUS32_V(x) ((x) << FW_PORT_CMD_LSTATUS32_S)
#define FW_PORT_CMD_LSTATUS32_G(x) \
(((x) >> FW_PORT_CMD_LSTATUS32_S) & FW_PORT_CMD_LSTATUS32_M)
#define FW_PORT_CMD_LSTATUS32_F FW_PORT_CMD_LSTATUS32_V(1U)
#define FW_PORT_CMD_LINKDNRC32_S 28
#define FW_PORT_CMD_LINKDNRC32_M 0x7
#define FW_PORT_CMD_LINKDNRC32_V(x) ((x) << FW_PORT_CMD_LINKDNRC32_S)
#define FW_PORT_CMD_LINKDNRC32_G(x) \
(((x) >> FW_PORT_CMD_LINKDNRC32_S) & FW_PORT_CMD_LINKDNRC32_M)
#define FW_PORT_CMD_DCBXDIS32_S 27
#define FW_PORT_CMD_DCBXDIS32_M 0x1
#define FW_PORT_CMD_DCBXDIS32_V(x) ((x) << FW_PORT_CMD_DCBXDIS32_S)
#define FW_PORT_CMD_DCBXDIS32_G(x) \
(((x) >> FW_PORT_CMD_DCBXDIS32_S) & FW_PORT_CMD_DCBXDIS32_M)
#define FW_PORT_CMD_DCBXDIS32_F FW_PORT_CMD_DCBXDIS32_V(1U)
#define FW_PORT_CMD_MDIOCAP32_S 26
#define FW_PORT_CMD_MDIOCAP32_M 0x1
#define FW_PORT_CMD_MDIOCAP32_V(x) ((x) << FW_PORT_CMD_MDIOCAP32_S)
#define FW_PORT_CMD_MDIOCAP32_G(x) \
(((x) >> FW_PORT_CMD_MDIOCAP32_S) & FW_PORT_CMD_MDIOCAP32_M)
#define FW_PORT_CMD_MDIOCAP32_F FW_PORT_CMD_MDIOCAP32_V(1U)
#define FW_PORT_CMD_MDIOADDR32_S 21
#define FW_PORT_CMD_MDIOADDR32_M 0x1f
#define FW_PORT_CMD_MDIOADDR32_V(x) ((x) << FW_PORT_CMD_MDIOADDR32_S)
#define FW_PORT_CMD_MDIOADDR32_G(x) \
(((x) >> FW_PORT_CMD_MDIOADDR32_S) & FW_PORT_CMD_MDIOADDR32_M)
#define FW_PORT_CMD_PORTTYPE32_S 13
#define FW_PORT_CMD_PORTTYPE32_M 0xff
#define FW_PORT_CMD_PORTTYPE32_V(x) ((x) << FW_PORT_CMD_PORTTYPE32_S)
#define FW_PORT_CMD_PORTTYPE32_G(x) \
(((x) >> FW_PORT_CMD_PORTTYPE32_S) & FW_PORT_CMD_PORTTYPE32_M)
#define FW_PORT_CMD_MODTYPE32_S 8
#define FW_PORT_CMD_MODTYPE32_M 0x1f
#define FW_PORT_CMD_MODTYPE32_V(x) ((x) << FW_PORT_CMD_MODTYPE32_S)
#define FW_PORT_CMD_MODTYPE32_G(x) \
(((x) >> FW_PORT_CMD_MODTYPE32_S) & FW_PORT_CMD_MODTYPE32_M)
#define FW_PORT_CMD_CBLLEN32_S 0
#define FW_PORT_CMD_CBLLEN32_M 0xff
#define FW_PORT_CMD_CBLLEN32_V(x) ((x) << FW_PORT_CMD_CBLLEN32_S)
#define FW_PORT_CMD_CBLLEN32_G(x) \
(((x) >> FW_PORT_CMD_CBLLEN32_S) & FW_PORT_CMD_CBLLEN32_M)
#define FW_PORT_CMD_AUXLINFO32_S 24
#define FW_PORT_CMD_AUXLINFO32_M 0xff
#define FW_PORT_CMD_AUXLINFO32_V(x) ((x) << FW_PORT_CMD_AUXLINFO32_S)
#define FW_PORT_CMD_AUXLINFO32_G(x) \
(((x) >> FW_PORT_CMD_AUXLINFO32_S) & FW_PORT_CMD_AUXLINFO32_M)
#define FW_PORT_AUXLINFO32_KX4_S 2
#define FW_PORT_AUXLINFO32_KX4_M 0x1
#define FW_PORT_AUXLINFO32_KX4_V(x) \
((x) << FW_PORT_AUXLINFO32_KX4_S)
#define FW_PORT_AUXLINFO32_KX4_G(x) \
(((x) >> FW_PORT_AUXLINFO32_KX4_S) & FW_PORT_AUXLINFO32_KX4_M)
#define FW_PORT_AUXLINFO32_KX4_F FW_PORT_AUXLINFO32_KX4_V(1U)
#define FW_PORT_AUXLINFO32_KR_S 1
#define FW_PORT_AUXLINFO32_KR_M 0x1
#define FW_PORT_AUXLINFO32_KR_V(x) \
((x) << FW_PORT_AUXLINFO32_KR_S)
#define FW_PORT_AUXLINFO32_KR_G(x) \
(((x) >> FW_PORT_AUXLINFO32_KR_S) & FW_PORT_AUXLINFO32_KR_M)
#define FW_PORT_AUXLINFO32_KR_F FW_PORT_AUXLINFO32_KR_V(1U)
#define FW_PORT_CMD_MTU32_S 0
#define FW_PORT_CMD_MTU32_M 0xffff
#define FW_PORT_CMD_MTU32_V(x) ((x) << FW_PORT_CMD_MTU32_S)
#define FW_PORT_CMD_MTU32_G(x) \
(((x) >> FW_PORT_CMD_MTU32_S) & FW_PORT_CMD_MTU32_M)
enum fw_port_type {
FW_PORT_TYPE_FIBER_XFI,
FW_PORT_TYPE_FIBER_XAUI,
......
......@@ -182,7 +182,7 @@ void t4vf_os_link_changed(struct adapter *adapter, int pidx, int link_ok)
break;
}
switch (pi->link_cfg.fc) {
switch ((int)pi->link_cfg.fc) {
case PAUSE_RX:
fc = "RX";
break;
......@@ -191,7 +191,7 @@ void t4vf_os_link_changed(struct adapter *adapter, int pidx, int link_ok)
fc = "TX";
break;
case PAUSE_RX|PAUSE_TX:
case PAUSE_RX | PAUSE_TX:
fc = "RX/TX";
break;
......@@ -1213,7 +1213,11 @@ static int from_fw_port_mod_type(enum fw_port_type port_type,
} else if (port_type == FW_PORT_TYPE_SFP ||
port_type == FW_PORT_TYPE_QSFP_10G ||
port_type == FW_PORT_TYPE_QSA ||
port_type == FW_PORT_TYPE_QSFP) {
port_type == FW_PORT_TYPE_QSFP ||
port_type == FW_PORT_TYPE_CR4_QSFP ||
port_type == FW_PORT_TYPE_CR_QSFP ||
port_type == FW_PORT_TYPE_CR2_QSFP ||
port_type == FW_PORT_TYPE_SFP28) {
if (mod_type == FW_PORT_MOD_TYPE_LR ||
mod_type == FW_PORT_MOD_TYPE_SR ||
mod_type == FW_PORT_MOD_TYPE_ER ||
......@@ -1224,6 +1228,9 @@ static int from_fw_port_mod_type(enum fw_port_type port_type,
return PORT_DA;
else
return PORT_OTHER;
} else if (port_type == FW_PORT_TYPE_KR4_100G ||
port_type == FW_PORT_TYPE_KR_SFP28) {
return PORT_NONE;
}
return PORT_OTHER;
......@@ -1242,12 +1249,13 @@ static void fw_caps_to_lmm(enum fw_port_type port_type,
unsigned int fw_caps,
unsigned long *link_mode_mask)
{
#define SET_LMM(__lmm_name) __set_bit(ETHTOOL_LINK_MODE_ ## __lmm_name\
## _BIT, link_mode_mask)
#define SET_LMM(__lmm_name) \
__set_bit(ETHTOOL_LINK_MODE_ ## __lmm_name ## _BIT, \
link_mode_mask)
#define FW_CAPS_TO_LMM(__fw_name, __lmm_name) \
do { \
if (fw_caps & FW_PORT_CAP_ ## __fw_name) \
if (fw_caps & FW_PORT_CAP32_ ## __fw_name) \
SET_LMM(__lmm_name); \
} while (0)
......@@ -1310,6 +1318,16 @@ static void fw_caps_to_lmm(enum fw_port_type port_type,
SET_LMM(25000baseCR_Full);
break;
case FW_PORT_TYPE_KR_SFP28:
SET_LMM(Backplane);
SET_LMM(25000baseKR_Full);
break;
case FW_PORT_TYPE_CR2_QSFP:
SET_LMM(FIBRE);
SET_LMM(50000baseSR2_Full);
break;
case FW_PORT_TYPE_KR4_100G:
case FW_PORT_TYPE_CR4_QSFP:
SET_LMM(FIBRE);
......@@ -1329,12 +1347,18 @@ static void fw_caps_to_lmm(enum fw_port_type port_type,
}
static int cxgb4vf_get_link_ksettings(struct net_device *dev,
struct ethtool_link_ksettings
*link_ksettings)
struct ethtool_link_ksettings *link_ksettings)
{
const struct port_info *pi = netdev_priv(dev);
struct port_info *pi = netdev_priv(dev);
struct ethtool_link_settings *base = &link_ksettings->base;
/* For the nonce, the Firmware doesn't send up Port State changes
* when the Virtual Interface attached to the Port is down. So
* if it's down, let's grab any changes.
*/
if (!netif_running(dev))
(void)t4vf_update_port_info(pi);
ethtool_link_ksettings_zero_link_mode(link_ksettings, supported);
ethtool_link_ksettings_zero_link_mode(link_ksettings, advertising);
ethtool_link_ksettings_zero_link_mode(link_ksettings, lp_advertising);
......@@ -1351,11 +1375,11 @@ static int cxgb4vf_get_link_ksettings(struct net_device *dev,
base->mdio_support = 0;
}
fw_caps_to_lmm(pi->port_type, pi->link_cfg.supported,
fw_caps_to_lmm(pi->port_type, pi->link_cfg.pcaps,
link_ksettings->link_modes.supported);
fw_caps_to_lmm(pi->port_type, pi->link_cfg.advertising,
fw_caps_to_lmm(pi->port_type, pi->link_cfg.acaps,
link_ksettings->link_modes.advertising);
fw_caps_to_lmm(pi->port_type, pi->link_cfg.lp_advertising,
fw_caps_to_lmm(pi->port_type, pi->link_cfg.lpacaps,
link_ksettings->link_modes.lp_advertising);
if (netif_carrier_ok(dev)) {
......@@ -1367,7 +1391,7 @@ static int cxgb4vf_get_link_ksettings(struct net_device *dev,
}
base->autoneg = pi->link_cfg.autoneg;
if (pi->link_cfg.supported & FW_PORT_CAP_ANEG)
if (pi->link_cfg.pcaps & FW_PORT_CAP32_ANEG)
ethtool_link_ksettings_add_link_mode(link_ksettings,
supported, Autoneg);
if (pi->link_cfg.autoneg)
......
......@@ -104,24 +104,62 @@ struct t4vf_port_stats {
/*
* Per-"port" (Virtual Interface) link configuration ...
*/
struct link_config {
unsigned int supported; /* link capabilities */
unsigned int advertising; /* advertised capabilities */
unsigned short lp_advertising; /* peer advertised capabilities */
unsigned int requested_speed; /* speed user has requested */
unsigned int speed; /* actual link speed */
unsigned char requested_fc; /* flow control user has requested */
unsigned char fc; /* actual link flow control */
unsigned char autoneg; /* autonegotiating? */
unsigned char link_ok; /* link up? */
typedef u16 fw_port_cap16_t; /* 16-bit Port Capabilities integral value */
typedef u32 fw_port_cap32_t; /* 32-bit Port Capabilities integral value */
enum fw_caps {
FW_CAPS_UNKNOWN = 0, /* 0'ed out initial state */
FW_CAPS16 = 1, /* old Firmware: 16-bit Port Capabilities */
FW_CAPS32 = 2, /* new Firmware: 32-bit Port Capabilities */
};
enum {
PAUSE_RX = 1 << 0,
PAUSE_TX = 1 << 1,
PAUSE_AUTONEG = 1 << 2
enum cc_pause {
PAUSE_RX = 1 << 0,
PAUSE_TX = 1 << 1,
PAUSE_AUTONEG = 1 << 2
};
enum cc_fec {
FEC_AUTO = 1 << 0, /* IEEE 802.3 "automatic" */
FEC_RS = 1 << 1, /* Reed-Solomon */
FEC_BASER_RS = 1 << 2, /* BaseR/Reed-Solomon */
};
struct link_config {
fw_port_cap32_t pcaps; /* link capabilities */
fw_port_cap32_t acaps; /* advertised capabilities */
fw_port_cap32_t lpacaps; /* peer advertised capabilities */
fw_port_cap32_t speed_caps; /* speed(s) user has requested */
u32 speed; /* actual link speed */
enum cc_pause requested_fc; /* flow control user has requested */
enum cc_pause fc; /* actual link flow control */
enum cc_fec auto_fec; /* Forward Error Correction: */
enum cc_fec requested_fec; /* "automatic" (IEEE 802.3), */
enum cc_fec fec; /* requested, and actual in use */
unsigned char autoneg; /* autonegotiating? */
unsigned char link_ok; /* link up? */
unsigned char link_down_rc; /* link down reason */
};
/* Return true if the Link Configuration supports "High Speeds" (those greater
* than 1Gb/s).
*/
static inline bool is_x_10g_port(const struct link_config *lc)
{
fw_port_cap32_t speeds, high_speeds;
speeds = FW_PORT_CAP32_SPEED_V(FW_PORT_CAP32_SPEED_G(lc->pcaps));
high_speeds =
speeds & ~(FW_PORT_CAP32_SPEED_100M | FW_PORT_CAP32_SPEED_1G);
return high_speeds != 0;
}
/*
* General device parameters ...
*/
......@@ -227,6 +265,7 @@ struct adapter_params {
struct arch_specific_params arch; /* chip specific params */
enum chip_type chip; /* chip code */
u8 nports; /* # of Ethernet "ports" */
u8 fw_caps_support; /* 32-bit Port Capabilities */
};
/* Firmware Mailbox Command/Reply log. All values are in Host-Endian format.
......@@ -266,24 +305,6 @@ static inline struct mbox_cmd *mbox_cmd_log_entry(struct mbox_cmd_log *log,
#define for_each_port(adapter, iter) \
for (iter = 0; iter < (adapter)->params.nports; iter++)
static inline bool is_10g_port(const struct link_config *lc)
{
return (lc->supported & FW_PORT_CAP_SPEED_10G) != 0;
}
/* Return true if the Link Configuration supports "High Speeds" (those greater
* than 1Gb/s).
*/
static inline bool is_x_10g_port(const struct link_config *lc)
{
unsigned int speeds, high_speeds;
speeds = FW_PORT_CAP_SPEED_V(FW_PORT_CAP_SPEED_G(lc->supported));
high_speeds = speeds & ~(FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G);
return high_speeds != 0;
}
static inline unsigned int core_ticks_per_usec(const struct adapter *adapter)
{
return adapter->params.vpd.cclk / 1000;
......@@ -387,6 +408,7 @@ int t4vf_iq_free(struct adapter *, unsigned int, unsigned int, unsigned int,
unsigned int);
int t4vf_eth_eq_free(struct adapter *, unsigned int);
int t4vf_update_port_info(struct port_info *pi);
int t4vf_handle_fw_rpl(struct adapter *, const __be64 *);
int t4vf_prep_adapter(struct adapter *);
int t4vf_get_vf_mac_acl(struct adapter *adapter, unsigned int pf,
......
......@@ -313,32 +313,130 @@ int t4vf_wr_mbox_core(struct adapter *adapter, const void *cmd, int size,
return ret;
}
#define ADVERT_MASK (FW_PORT_CAP_SPEED_100M | FW_PORT_CAP_SPEED_1G |\
FW_PORT_CAP_SPEED_10G | FW_PORT_CAP_SPEED_25G | \
FW_PORT_CAP_SPEED_40G | FW_PORT_CAP_SPEED_100G | \
FW_PORT_CAP_ANEG)
#define ADVERT_MASK (FW_PORT_CAP32_SPEED_V(FW_PORT_CAP32_SPEED_M) | \
FW_PORT_CAP32_ANEG)
/**
* fwcaps16_to_caps32 - convert 16-bit Port Capabilities to 32-bits
* @caps16: a 16-bit Port Capabilities value
*
* Returns the equivalent 32-bit Port Capabilities value.
*/
static fw_port_cap32_t fwcaps16_to_caps32(fw_port_cap16_t caps16)
{
fw_port_cap32_t caps32 = 0;
#define CAP16_TO_CAP32(__cap) \
do { \
if (caps16 & FW_PORT_CAP_##__cap) \
caps32 |= FW_PORT_CAP32_##__cap; \
} while (0)
CAP16_TO_CAP32(SPEED_100M);
CAP16_TO_CAP32(SPEED_1G);
CAP16_TO_CAP32(SPEED_25G);
CAP16_TO_CAP32(SPEED_10G);
CAP16_TO_CAP32(SPEED_40G);
CAP16_TO_CAP32(SPEED_100G);
CAP16_TO_CAP32(FC_RX);
CAP16_TO_CAP32(FC_TX);
CAP16_TO_CAP32(ANEG);
CAP16_TO_CAP32(MDIX);
CAP16_TO_CAP32(MDIAUTO);
CAP16_TO_CAP32(FEC_RS);
CAP16_TO_CAP32(FEC_BASER_RS);
CAP16_TO_CAP32(802_3_PAUSE);
CAP16_TO_CAP32(802_3_ASM_DIR);
#undef CAP16_TO_CAP32
return caps32;
}
/* Translate Firmware Pause specification to Common Code */
static inline enum cc_pause fwcap_to_cc_pause(fw_port_cap32_t fw_pause)
{
enum cc_pause cc_pause = 0;
if (fw_pause & FW_PORT_CAP32_FC_RX)
cc_pause |= PAUSE_RX;
if (fw_pause & FW_PORT_CAP32_FC_TX)
cc_pause |= PAUSE_TX;
return cc_pause;
}
/* Translate Firmware Forward Error Correction specification to Common Code */
static inline enum cc_fec fwcap_to_cc_fec(fw_port_cap32_t fw_fec)
{
enum cc_fec cc_fec = 0;
if (fw_fec & FW_PORT_CAP32_FEC_RS)
cc_fec |= FEC_RS;
if (fw_fec & FW_PORT_CAP32_FEC_BASER_RS)
cc_fec |= FEC_BASER_RS;
return cc_fec;
}
/**
* Return the highest speed set in the port capabilities, in Mb/s.
*/
static unsigned int fwcap_to_speed(fw_port_cap32_t caps)
{
#define TEST_SPEED_RETURN(__caps_speed, __speed) \
do { \
if (caps & FW_PORT_CAP32_SPEED_##__caps_speed) \
return __speed; \
} while (0)
TEST_SPEED_RETURN(400G, 400000);
TEST_SPEED_RETURN(200G, 200000);
TEST_SPEED_RETURN(100G, 100000);
TEST_SPEED_RETURN(50G, 50000);
TEST_SPEED_RETURN(40G, 40000);
TEST_SPEED_RETURN(25G, 25000);
TEST_SPEED_RETURN(10G, 10000);
TEST_SPEED_RETURN(1G, 1000);
TEST_SPEED_RETURN(100M, 100);
#undef TEST_SPEED_RETURN
return 0;
}
/*
* init_link_config - initialize a link's SW state
* @lc: structure holding the link state
* @caps: link capabilities
* @pcaps: link Port Capabilities
* @acaps: link current Advertised Port Capabilities
*
* Initializes the SW state maintained for each link, including the link's
* capabilities and default speed/flow-control/autonegotiation settings.
*/
static void init_link_config(struct link_config *lc, unsigned int caps)
static void init_link_config(struct link_config *lc,
fw_port_cap32_t pcaps,
fw_port_cap32_t acaps)
{
lc->supported = caps;
lc->lp_advertising = 0;
lc->requested_speed = 0;
lc->pcaps = pcaps;
lc->lpacaps = 0;
lc->speed_caps = 0;
lc->speed = 0;
lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
if (lc->supported & FW_PORT_CAP_ANEG) {
lc->advertising = lc->supported & ADVERT_MASK;
/* For Forward Error Control, we default to whatever the Firmware
* tells us the Link is currently advertising.
*/
lc->auto_fec = fwcap_to_cc_fec(acaps);
lc->requested_fec = FEC_AUTO;
lc->fec = lc->auto_fec;
if (lc->pcaps & FW_PORT_CAP32_ANEG) {
lc->acaps = acaps & ADVERT_MASK;
lc->autoneg = AUTONEG_ENABLE;
lc->requested_fc |= PAUSE_AUTONEG;
} else {
lc->advertising = 0;
lc->acaps = 0;
lc->autoneg = AUTONEG_DISABLE;
}
}
......@@ -351,9 +449,30 @@ static void init_link_config(struct link_config *lc, unsigned int caps)
int t4vf_port_init(struct adapter *adapter, int pidx)
{
struct port_info *pi = adap2pinfo(adapter, pidx);
unsigned int fw_caps = adapter->params.fw_caps_support;
struct fw_vi_cmd vi_cmd, vi_rpl;
struct fw_port_cmd port_cmd, port_rpl;
int v;
enum fw_port_type port_type;
int mdio_addr;
fw_port_cap32_t pcaps, acaps;
int ret;
/* If we haven't yet determined whether we're talking to Firmware
* which knows the new 32-bit Port Capabilities, it's time to find
* out now. This will also tell new Firmware to send us Port Status
* Updates using the new 32-bit Port Capabilities version of the
* Port Information message.
*/
if (fw_caps == FW_CAPS_UNKNOWN) {
u32 param, val;
param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_PFVF) |
FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_PFVF_PORT_CAPS32));
val = 1;
ret = t4vf_set_params(adapter, 1, &param, &val);
fw_caps = (ret == 0 ? FW_CAPS32 : FW_CAPS16);
adapter->params.fw_caps_support = fw_caps;
}
/*
* Execute a VI Read command to get our Virtual Interface information
......@@ -365,9 +484,9 @@ int t4vf_port_init(struct adapter *adapter, int pidx)
FW_CMD_READ_F);
vi_cmd.alloc_to_len16 = cpu_to_be32(FW_LEN16(vi_cmd));
vi_cmd.type_viid = cpu_to_be16(FW_VI_CMD_VIID_V(pi->viid));
v = t4vf_wr_mbox(adapter, &vi_cmd, sizeof(vi_cmd), &vi_rpl);
if (v)
return v;
ret = t4vf_wr_mbox(adapter, &vi_cmd, sizeof(vi_cmd), &vi_rpl);
if (ret != FW_SUCCESS)
return ret;
BUG_ON(pi->port_id != FW_VI_CMD_PORTID_G(vi_rpl.portid_pkd));
pi->rss_size = FW_VI_CMD_RSSSIZE_G(be16_to_cpu(vi_rpl.rsssize_pkd));
......@@ -385,21 +504,42 @@ int t4vf_port_init(struct adapter *adapter, int pidx)
FW_CMD_REQUEST_F |
FW_CMD_READ_F |
FW_PORT_CMD_PORTID_V(pi->port_id));
port_cmd.action_to_len16 =
cpu_to_be32(FW_PORT_CMD_ACTION_V(FW_PORT_ACTION_GET_PORT_INFO) |
FW_LEN16(port_cmd));
v = t4vf_wr_mbox(adapter, &port_cmd, sizeof(port_cmd), &port_rpl);
if (v)
return v;
port_cmd.action_to_len16 = cpu_to_be32(
FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
? FW_PORT_ACTION_GET_PORT_INFO
: FW_PORT_ACTION_GET_PORT_INFO32) |
FW_LEN16(port_cmd));
ret = t4vf_wr_mbox(adapter, &port_cmd, sizeof(port_cmd), &port_rpl);
if (ret != FW_SUCCESS)
return ret;
v = be32_to_cpu(port_rpl.u.info.lstatus_to_modtype);
pi->mdio_addr = (v & FW_PORT_CMD_MDIOCAP_F) ?
FW_PORT_CMD_MDIOADDR_G(v) : -1;
pi->port_type = FW_PORT_CMD_PTYPE_G(v);
pi->mod_type = FW_PORT_MOD_TYPE_NA;
/* Extract the various fields from the Port Information message. */
if (fw_caps == FW_CAPS16) {
u32 lstatus = be32_to_cpu(port_rpl.u.info.lstatus_to_modtype);
init_link_config(&pi->link_cfg, be16_to_cpu(port_rpl.u.info.pcap));
port_type = FW_PORT_CMD_PTYPE_G(lstatus);
mdio_addr = ((lstatus & FW_PORT_CMD_MDIOCAP_F)
? FW_PORT_CMD_MDIOADDR_G(lstatus)
: -1);
pcaps = fwcaps16_to_caps32(be16_to_cpu(port_rpl.u.info.pcap));
acaps = fwcaps16_to_caps32(be16_to_cpu(port_rpl.u.info.acap));
} else {
u32 lstatus32 =
be32_to_cpu(port_rpl.u.info32.lstatus32_to_cbllen32);
port_type = FW_PORT_CMD_PORTTYPE32_G(lstatus32);
mdio_addr = ((lstatus32 & FW_PORT_CMD_MDIOCAP32_F)
? FW_PORT_CMD_MDIOADDR32_G(lstatus32)
: -1);
pcaps = be32_to_cpu(port_rpl.u.info32.pcaps32);
acaps = be32_to_cpu(port_rpl.u.info32.acaps32);
}
pi->port_type = port_type;
pi->mdio_addr = mdio_addr;
pi->mod_type = FW_PORT_MOD_TYPE_NA;
init_link_config(&pi->link_cfg, pcaps, acaps);
return 0;
}
......@@ -1666,6 +1806,202 @@ int t4vf_eth_eq_free(struct adapter *adapter, unsigned int eqid)
return t4vf_wr_mbox(adapter, &cmd, sizeof(cmd), NULL);
}
/**
* t4vf_link_down_rc_str - return a string for a Link Down Reason Code
* @link_down_rc: Link Down Reason Code
*
* Returns a string representation of the Link Down Reason Code.
*/
const char *t4vf_link_down_rc_str(unsigned char link_down_rc)
{
static const char * const reason[] = {
"Link Down",
"Remote Fault",
"Auto-negotiation Failure",
"Reserved",
"Insufficient Airflow",
"Unable To Determine Reason",
"No RX Signal Detected",
"Reserved",
};
if (link_down_rc >= ARRAY_SIZE(reason))
return "Bad Reason Code";
return reason[link_down_rc];
}
/**
* t4vf_handle_get_port_info - process a FW reply message
* @pi: the port info
* @rpl: start of the FW message
*
* Processes a GET_PORT_INFO FW reply message.
*/
void t4vf_handle_get_port_info(struct port_info *pi,
const struct fw_port_cmd *cmd)
{
int action = FW_PORT_CMD_ACTION_G(be32_to_cpu(cmd->action_to_len16));
struct adapter *adapter = pi->adapter;
struct link_config *lc = &pi->link_cfg;
int link_ok, linkdnrc;
enum fw_port_type port_type;
enum fw_port_module_type mod_type;
unsigned int speed, fc, fec;
fw_port_cap32_t pcaps, acaps, lpacaps, linkattr;
/* Extract the various fields from the Port Information message. */
switch (action) {
case FW_PORT_ACTION_GET_PORT_INFO: {
u32 lstatus = be32_to_cpu(cmd->u.info.lstatus_to_modtype);
link_ok = (lstatus & FW_PORT_CMD_LSTATUS_F) != 0;
linkdnrc = FW_PORT_CMD_LINKDNRC_G(lstatus);
port_type = FW_PORT_CMD_PTYPE_G(lstatus);
mod_type = FW_PORT_CMD_MODTYPE_G(lstatus);
pcaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.pcap));
acaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.acap));
lpacaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.lpacap));
/* Unfortunately the format of the Link Status in the old
* 16-bit Port Information message isn't the same as the
* 16-bit Port Capabilities bitfield used everywhere else ...
*/
linkattr = 0;
if (lstatus & FW_PORT_CMD_RXPAUSE_F)
linkattr |= FW_PORT_CAP32_FC_RX;
if (lstatus & FW_PORT_CMD_TXPAUSE_F)
linkattr |= FW_PORT_CAP32_FC_TX;
if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M))
linkattr |= FW_PORT_CAP32_SPEED_100M;
if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G))
linkattr |= FW_PORT_CAP32_SPEED_1G;
if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G))
linkattr |= FW_PORT_CAP32_SPEED_10G;
if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G))
linkattr |= FW_PORT_CAP32_SPEED_25G;
if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G))
linkattr |= FW_PORT_CAP32_SPEED_40G;
if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G))
linkattr |= FW_PORT_CAP32_SPEED_100G;
break;
}
case FW_PORT_ACTION_GET_PORT_INFO32: {
u32 lstatus32;
lstatus32 = be32_to_cpu(cmd->u.info32.lstatus32_to_cbllen32);
link_ok = (lstatus32 & FW_PORT_CMD_LSTATUS32_F) != 0;
linkdnrc = FW_PORT_CMD_LINKDNRC32_G(lstatus32);
port_type = FW_PORT_CMD_PORTTYPE32_G(lstatus32);
mod_type = FW_PORT_CMD_MODTYPE32_G(lstatus32);
pcaps = be32_to_cpu(cmd->u.info32.pcaps32);
acaps = be32_to_cpu(cmd->u.info32.acaps32);
lpacaps = be32_to_cpu(cmd->u.info32.lpacaps32);
linkattr = be32_to_cpu(cmd->u.info32.linkattr32);
break;
}
default:
dev_err(adapter->pdev_dev, "Handle Port Information: Bad Command/Action %#x\n",
be32_to_cpu(cmd->action_to_len16));
return;
}
fec = fwcap_to_cc_fec(acaps);
fc = fwcap_to_cc_pause(linkattr);
speed = fwcap_to_speed(linkattr);
if (mod_type != pi->mod_type) {
/* When a new Transceiver Module is inserted, the Firmware
* will examine any Forward Error Correction parameters
* present in the Transceiver Module i2c EPROM and determine
* the supported and recommended FEC settings from those
* based on IEEE 802.3 standards. We always record the
* IEEE 802.3 recommended "automatic" settings.
*/
lc->auto_fec = fec;
/* Some versions of the early T6 Firmware "cheated" when
* handling different Transceiver Modules by changing the
* underlaying Port Type reported to the Host Drivers. As
* such we need to capture whatever Port Type the Firmware
* sends us and record it in case it's different from what we
* were told earlier. Unfortunately, since Firmware is
* forever, we'll need to keep this code here forever, but in
* later T6 Firmware it should just be an assignment of the
* same value already recorded.
*/
pi->port_type = port_type;
pi->mod_type = mod_type;
t4vf_os_portmod_changed(adapter, pi->pidx);
}
if (link_ok != lc->link_ok || speed != lc->speed ||
fc != lc->fc || fec != lc->fec) { /* something changed */
if (!link_ok && lc->link_ok) {
lc->link_down_rc = linkdnrc;
dev_warn(adapter->pdev_dev, "Port %d link down, reason: %s\n",
pi->port_id, t4vf_link_down_rc_str(linkdnrc));
}
lc->link_ok = link_ok;
lc->speed = speed;
lc->fc = fc;
lc->fec = fec;
lc->pcaps = pcaps;
lc->lpacaps = lpacaps;
lc->acaps = acaps & ADVERT_MASK;
if (lc->acaps & FW_PORT_CAP32_ANEG) {
lc->autoneg = AUTONEG_ENABLE;
} else {
/* When Autoneg is disabled, user needs to set
* single speed.
* Similar to cxgb4_ethtool.c: set_link_ksettings
*/
lc->acaps = 0;
lc->speed_caps = fwcap_to_speed(acaps);
lc->autoneg = AUTONEG_DISABLE;
}
t4vf_os_link_changed(adapter, pi->pidx, link_ok);
}
}
/**
* t4vf_update_port_info - retrieve and update port information if changed
* @pi: the port_info
*
* We issue a Get Port Information Command to the Firmware and, if
* successful, we check to see if anything is different from what we
* last recorded and update things accordingly.
*/
int t4vf_update_port_info(struct port_info *pi)
{
unsigned int fw_caps = pi->adapter->params.fw_caps_support;
struct fw_port_cmd port_cmd;
int ret;
memset(&port_cmd, 0, sizeof(port_cmd));
port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
FW_CMD_REQUEST_F | FW_CMD_READ_F |
FW_PORT_CMD_PORTID_V(pi->port_id));
port_cmd.action_to_len16 = cpu_to_be32(
FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
? FW_PORT_ACTION_GET_PORT_INFO
: FW_PORT_ACTION_GET_PORT_INFO32) |
FW_LEN16(port_cmd));
ret = t4vf_wr_mbox(pi->adapter, &port_cmd, sizeof(port_cmd),
&port_cmd);
if (ret)
return ret;
t4vf_handle_get_port_info(pi, &port_cmd);
return 0;
}
/**
* t4vf_handle_fw_rpl - process a firmware reply message
* @adapter: the adapter
......@@ -1685,15 +2021,12 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl)
*/
const struct fw_port_cmd *port_cmd =
(const struct fw_port_cmd *)rpl;
u32 stat, mod;
int action, port_id, link_ok, speed, fc, pidx;
/*
* Extract various fields from port status change message.
*/
action = FW_PORT_CMD_ACTION_G(
int action = FW_PORT_CMD_ACTION_G(
be32_to_cpu(port_cmd->action_to_len16));
if (action != FW_PORT_ACTION_GET_PORT_INFO) {
int port_id, pidx;
if (action != FW_PORT_ACTION_GET_PORT_INFO &&
action != FW_PORT_ACTION_GET_PORT_INFO32) {
dev_err(adapter->pdev_dev,
"Unknown firmware PORT reply action %x\n",
action);
......@@ -1702,61 +2035,12 @@ int t4vf_handle_fw_rpl(struct adapter *adapter, const __be64 *rpl)
port_id = FW_PORT_CMD_PORTID_G(
be32_to_cpu(port_cmd->op_to_portid));
stat = be32_to_cpu(port_cmd->u.info.lstatus_to_modtype);
link_ok = (stat & FW_PORT_CMD_LSTATUS_F) != 0;
speed = 0;
fc = 0;
if (stat & FW_PORT_CMD_RXPAUSE_F)
fc |= PAUSE_RX;
if (stat & FW_PORT_CMD_TXPAUSE_F)
fc |= PAUSE_TX;
if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M))
speed = 100;
else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G))
speed = 1000;
else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G))
speed = 10000;
else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G))
speed = 25000;
else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G))
speed = 40000;
else if (stat & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G))
speed = 100000;
/*
* Scan all of our "ports" (Virtual Interfaces) looking for
* those bound to the physical port which has changed. If
* our recorded state doesn't match the current state,
* signal that change to the OS code.
*/
for_each_port(adapter, pidx) {
struct port_info *pi = adap2pinfo(adapter, pidx);
struct link_config *lc;
if (pi->port_id != port_id)
continue;
lc = &pi->link_cfg;
mod = FW_PORT_CMD_MODTYPE_G(stat);
if (mod != pi->mod_type) {
pi->mod_type = mod;
t4vf_os_portmod_changed(adapter, pidx);
}
if (link_ok != lc->link_ok || speed != lc->speed ||
fc != lc->fc) {
/* something changed */
lc->link_ok = link_ok;
lc->speed = speed;
lc->fc = fc;
lc->supported =
be16_to_cpu(port_cmd->u.info.pcap);
lc->lp_advertising =
be16_to_cpu(port_cmd->u.info.lpacap);
t4vf_os_link_changed(adapter, pidx, link_ok);
}
t4vf_handle_get_port_info(pi, port_cmd);
}
break;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment