Commit c331e766 authored by Marek Belisko's avatar Marek Belisko Committed by Greg Kroah-Hartman

staging: ft1000-pcmcia: Fix compilation errors.

Following patch will fix all compilation errors. Main problems
was with pcmcia API changes. Also remove BROKEN as now driver
is properly build.
Signed-off-by: default avatarMarek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: default avatarStano Lanci <chl.pixo@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 267024a9
......@@ -13,7 +13,7 @@ config FT1000_USB
config FT1000_PCMCIA
tristate "Driver for ft1000 pcmcia device."
depends on PCMCIA && BROKEN
depends on PCMCIA
depends on NET
help
Say Y if you want to have support for Flarion card also called
......
......@@ -39,9 +39,6 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
//#include <pcmcia/version.h> // Slavius 21.10.2009 removed from kernel
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
......@@ -51,8 +48,6 @@
#include <asm/byteorder.h>
#include <asm/uaccess.h>
#include "ft1000_cs.h" // Slavius 21.10.2009 because CS_SUCCESS constant is missing due to removed pcmcia/version.h
/*====================================================================*/
/* Module parameters */
......@@ -82,9 +77,8 @@ MODULE_LICENSE("GPL");
/*====================================================================*/
struct net_device *init_ft1000_card(int, int, unsigned char *,
void *ft1000_reset, struct pcmcia_device * link,
struct device *fdev);
struct net_device *init_ft1000_card(struct pcmcia_device *link,
void *ft1000_reset);
void stop_ft1000_card(struct net_device *);
static int ft1000_config(struct pcmcia_device *link);
......@@ -111,73 +105,7 @@ typedef struct local_info_t {
static void ft1000_reset(struct pcmcia_device * link)
{
conf_reg_t reg;
DEBUG(0, "ft1000_cs:ft1000_reset is called................\n");
/* Soft-Reset card */
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = COR_SOFT_RESET;
pcmcia_access_configuration_register(link, &reg);
/* Wait until the card has acknowledged our reset */
udelay(2);
/* Restore original COR configuration index */
/* Need at least 2 write to respond */
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = COR_DEFAULT;
pcmcia_access_configuration_register(link, &reg);
/* Wait until the card has finished restarting */
udelay(1);
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = COR_DEFAULT;
pcmcia_access_configuration_register(link, &reg);
/* Wait until the card has finished restarting */
udelay(1);
reg.Action = CS_WRITE;
reg.Offset = CISREG_COR;
reg.Value = COR_DEFAULT;
pcmcia_access_configuration_register(link, &reg);
/* Wait until the card has finished restarting */
udelay(1);
}
/*====================================================================*/
static int get_tuple_first(struct pcmcia_device *link, tuple_t * tuple,
cisparse_t * parse)
{
int i;
i = pcmcia_get_first_tuple(link, tuple);
if (i != CS_SUCCESS)
return i;
i = pcmcia_get_tuple_data(link, tuple);
if (i != CS_SUCCESS)
return i;
return pcmcia_parse_tuple(tuple, parse); // Slavius 21.10.2009 removed unused link parameter
}
static int get_tuple_next(struct pcmcia_device *link, tuple_t * tuple,
cisparse_t * parse)
{
int i;
i = pcmcia_get_next_tuple(link, tuple);
if (i != CS_SUCCESS)
return i;
i = pcmcia_get_tuple_data(link, tuple);
if (i != CS_SUCCESS)
return i;
return pcmcia_parse_tuple(tuple, parse); // Slavius 21.10.2009 removed unused link parameter
pcmcia_reset_card(link->socket);
}
/*======================================================================
......@@ -202,13 +130,10 @@ static int ft1000_attach(struct pcmcia_device *link)
link->priv = local;
local->dev = NULL;
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
link->irq.Handler = NULL;
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
return ft1000_config(link);
} /* ft1000_attach */
/*======================================================================
......@@ -235,13 +160,24 @@ static void ft1000_detach(struct pcmcia_device *link)
stop_ft1000_card(dev);
}
ft1000_release(link);
pcmcia_disable_device(link);
/* This points to the parent local_info_t struct */
free_netdev(dev);
} /* ft1000_detach */
/*======================================================================
Check if the io window is configured
======================================================================*/
int ft1000_confcheck(struct pcmcia_device *link, void *priv_data)
{
return pcmcia_request_io(link);
} /* ft1000_confcheck */
/*======================================================================
ft1000_config() is scheduled to run after a CARD_INSERTION event
......@@ -250,160 +186,36 @@ static void ft1000_detach(struct pcmcia_device *link)
======================================================================*/
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
#define CFG_CHECK(fn, ret) \
last_fn = (fn); if ((last_ret = (ret)) != 0) goto next_entry
static int ft1000_config(struct pcmcia_device * link)
static int ft1000_config(struct pcmcia_device *link)
{
tuple_t tuple;
cisparse_t parse;
int last_fn, last_ret, i;
u_char buf[64];
cistpl_lan_node_id_t *node_id;
cistpl_cftable_entry_t dflt = { 0 };
cistpl_cftable_entry_t *cfg;
unsigned char mac_address[6];
int ret;
DEBUG(0, "ft1000_cs: ft1000_config(0x%p)\n", link);
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
// tuple.DesiredTuple = CISTPL_CONFIG;
// tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
tuple.TupleOffset = 0;
// CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
// CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
// CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
// link->conf.ConfigBase = parse.config.base;
// link->conf.Present = parse.config.rmask[0];
dev_dbg(&link->dev, "ft1000_cs: ft1000_config(0x%p)\n", link);
/*
In this loop, we scan the CIS for configuration table entries,
each of which describes a valid card configuration, including
voltage, IO window, memory window, and interrupt settings.
We make no assumptions about the card to be configured: we use
just the information available in the CIS. In an ideal world,
this would work for any PCMCIA card, but it requires a complete
and accurate CIS. In practice, a driver usually "knows" most of
these things without consulting the CIS, and most client drivers
will only use the CIS to fill in implementation-defined details.
*/
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
tuple.Attributes = 0;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
while (1) {
cfg = &(parse.cftable_entry);
CFG_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
CFG_CHECK(ParseTuple,
pcmcia_parse_tuple(&tuple, &parse)); // Slavius 21.10.2009 removed unused link parameter
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
dflt = *cfg;
if (cfg->index == 0)
goto next_entry;
link->conf.ConfigIndex = cfg->index;
/* Do we need to allocate an interrupt? */
if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
link->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
link->io.NumPorts1 = link->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(io->flags & CISTPL_IO_8BIT)) {
DEBUG(0, "ft1000_cs: IO_DATA_PATH_WIDTH_16\n");
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
}
if (!(io->flags & CISTPL_IO_16BIT)) {
DEBUG(0, "ft1000_cs: IO_DATA_PATH_WIDTH_8\n");
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
}
link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
link->io.BasePort1 = io->win[0].base;
link->io.NumPorts1 = io->win[0].len;
if (io->nwin > 1) {
link->io.Attributes2 = link->io.Attributes1;
link->io.BasePort2 = io->win[1].base;
link->io.NumPorts2 = io->win[1].len;
}
/* This reserves IO space but doesn't actually enable it */
pcmcia_request_io(link, &link->io);
}
break;
next_entry:
last_ret = pcmcia_get_next_tuple(link, &tuple);
}
if (last_ret != CS_SUCCESS) {
cs_error(link, RequestIO, last_ret);
goto failed;
/* setup IO window */
ret = pcmcia_loop_config(link, ft1000_confcheck, NULL);
if (ret) {
printk(KERN_INFO "ft1000: Could not configure pcmcia\n");
return -ENODEV;
}
/*
Allocate an interrupt line. Note that this does not assign a
handler to the interrupt, unless the 'Handler' member of the
irq structure is initialized.
*/
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping, and putting the
card and host interface into "Memory and IO" mode.
*/
CS_CHECK(RequestConfiguration,
pcmcia_request_configuration(link, &link->conf));
/* Get MAC address from tuples */
tuple.Attributes = tuple.TupleOffset = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
/* Check for a LAN function extension tuple */
tuple.DesiredTuple = CISTPL_FUNCE;
i = get_tuple_first(link, &tuple, &parse);
while (i == CS_SUCCESS) {
if (parse.funce.type == CISTPL_FUNCE_LAN_NODE_ID)
break;
i = get_tuple_next(link, &tuple, &parse);
/* configure device */
ret = pcmcia_enable_device(link);
if (ret) {
printk(KERN_INFO "ft1000: could not enable pcmcia\n");
goto failed;
}
if (i == CS_SUCCESS) {
node_id = (cistpl_lan_node_id_t *) parse.funce.data;
if (node_id->nb == 6) {
for (i = 0; i < 6; i++)
mac_address[i] = node_id->id[i];
}
((local_info_t *) link->priv)->dev = init_ft1000_card(link,
&ft1000_reset);
if (((local_info_t *) link->priv)->dev == NULL) {
printk(KERN_INFO "ft1000: Could not register as network device\n");
goto failed;
}
((local_info_t *) link->priv)->dev =
init_ft1000_card(link->irq.AssignedIRQ, link->io.BasePort1,
&mac_address[0], ft1000_reset, link,
&handle_to_dev(link));
/*
At this point, the dev_node_t structure(s) need to be
initialized and arranged in a linked list at link->dev.
*/
/* Finally, report what we've done */
return 0;
cs_failed:
cs_error(link, last_fn, last_ret);
failed:
ft1000_release(link);
return -ENODEV;
......@@ -429,14 +241,11 @@ static void ft1000_release(struct pcmcia_device * link)
no one will try to access the device or its data structures.
*/
/* Unlink the device chain */
link->dev_node = NULL;
/*
In a normal driver, additional code may be needed to release
other kernel data structures associated with this device.
*/
kfree((local_info_t *) link->priv);
/* Don't bother checking to see if these succeed or not */
pcmcia_disable_device(link);
......
......@@ -310,7 +310,7 @@ USHORT hdr_checksum(PPSEUDO_HDR pHdr)
return chksum;
}
int card_download(struct net_device *dev, void *pFileStart, UINT FileLength)
int card_download(struct net_device *dev, const u8 *pFileStart, UINT FileLength)
{
FT1000_INFO *info = (PFT1000_INFO) netdev_priv(dev);
int Status = SUCCESS;
......
......@@ -43,6 +43,10 @@
#include <linux/firmware.h>
#include <linux/ethtool.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
#ifdef FT_DEBUG
#define DEBUG(n, args...) printk(KERN_DEBUG args);
#else
......@@ -53,7 +57,7 @@
#include "ft1000_dev.h"
#include "ft1000.h"
int card_download(struct net_device *dev, void *pFileStart, UINT FileLength);
int card_download(struct net_device *dev, const u8 *pFileStart, UINT FileLength);
void ft1000InitProc(struct net_device *dev);
void ft1000CleanupProc(struct net_device *dev);
......@@ -2148,13 +2152,11 @@ static const struct ethtool_ops ops = {
.get_link = ft1000_get_link
};
struct net_device *init_ft1000_card(unsigned short irq, int port,
unsigned char *mac_addr, void *ft1000_reset,
void *link, struct device *fdev)
struct net_device *init_ft1000_card(struct pcmcia_device *link,
void *ft1000_reset)
{
FT1000_INFO *info;
struct net_device *dev;
int i;
static const struct net_device_ops ft1000ops = // Slavius 21.10.2009 due to kernel changes
{
......@@ -2165,8 +2167,8 @@ struct net_device *init_ft1000_card(unsigned short irq, int port,
};
DEBUG(1, "ft1000_hw: init_ft1000_card()\n");
DEBUG(1, "ft1000_hw: irq = %d\n", irq);
DEBUG(1, "ft1000_hw: port = 0x%04x\n", port);
DEBUG(1, "ft1000_hw: irq = %d\n", link->irq);
DEBUG(1, "ft1000_hw: port = 0x%04x\n", link->resource[0]->start);
flarion_ft1000_cnt++;
......@@ -2184,7 +2186,7 @@ struct net_device *init_ft1000_card(unsigned short irq, int port,
return NULL;
}
SET_NETDEV_DEV(dev, fdev);
SET_NETDEV_DEV(dev, &link->dev);
info = netdev_priv(dev);
memset(info, 0, sizeof(FT1000_INFO));
......@@ -2227,15 +2229,13 @@ struct net_device *init_ft1000_card(unsigned short irq, int port,
DEBUG(0, "device name = %s\n", dev->name);
for (i = 0; i < 6; i++) {
dev->dev_addr[i] = mac_addr[i];
DEBUG(1, "ft1000_hw: mac_addr %d = 0x%02x\n", i, mac_addr[i]);
dev->irq = link->irq;
dev->base_addr = link->resource[0]->start;
if (pcmcia_get_mac_from_cis(link, dev)) {
printk(KERN_ERR "ft1000: Could not read mac address\n");
goto err_dev;
}
netif_stop_queue(dev);
dev->irq = irq;
dev->base_addr = port;
if (request_irq(dev->irq, ft1000_interrupt, IRQF_SHARED, dev->name, dev)) {
printk(KERN_ERR "ft1000: Could not request_irq\n");
goto err_dev;
......@@ -2254,13 +2254,13 @@ struct net_device *init_ft1000_card(unsigned short irq, int port,
info->AsicID = ft1000_read_reg(dev, FT1000_REG_ASIC_ID);
if (info->AsicID == ELECTRABUZZ_ID) {
DEBUG(0, "ft1000_hw: ELECTRABUZZ ASIC\n");
if (request_firmware(&fw_entry, "ft1000.img", fdev) != 0) {
if (request_firmware(&fw_entry, "ft1000.img", &link->dev) != 0) {
printk(KERN_INFO "ft1000: Could not open ft1000.img\n");
goto err_unreg;
}
} else {
DEBUG(0, "ft1000_hw: MAGNEMITE ASIC\n");
if (request_firmware(&fw_entry, "ft2000.img", fdev) != 0) {
if (request_firmware(&fw_entry, "ft2000.img", &link->dev) != 0) {
printk(KERN_INFO "ft1000: Could not open ft2000.img\n");
goto err_unreg;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment