Skip to content

L
linux
Commit c52fd05a authored by David S. Miller's avatar David S. Miller
Browse files
Options

Merge tag 'wireless-drivers-next-for-davem-2015-11-25' of... 

Merge tag 'wireless-drivers-next-for-davem-2015-11-25' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
Add vendor directories (for example intel, marvell and so on) to
drivers/net/wireless and change the menuconfig to follow the same
categorisation. This unifies the directory layout as we already had few drivers
already using vendor directories (especially ath and ti).
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 00cc3679 6d808eba
Hide whitespace changes
Inline Side-by-side
Showing with 511 additions and 314 deletions
MAINTAINERS
View file @ c52fd05a
......@@ -388,7 +388,7 @@ ADM8211 WIRELESS DRIVER
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/
S: Orphan
F: drivers/net/wireless/adm8211.*
F: drivers/net/wireless/admtek/adm8211.*
ADP1653 FLASH CONTROLLER DRIVER
M: Sakari Ailus <sakari.ailus@iki.fi>
......@@ -1992,7 +1992,7 @@ L: linux-wireless@vger.kernel.org
W: http://www.thekelleys.org.uk/atmel
W: http://atmelwlandriver.sourceforge.net/
S: Maintained
F: drivers/net/wireless/atmel*
F: drivers/net/wireless/atmel/atmel*
ATMEL MAXTOUCH DRIVER
M: Nick Dyer <nick.dyer@itdev.co.uk>
......@@ -2081,7 +2081,7 @@ L: linux-wireless@vger.kernel.org
L: b43-dev@lists.infradead.org
W: http://wireless.kernel.org/en/users/Drivers/b43
S: Odd Fixes
F: drivers/net/wireless/b43/
F: drivers/net/wireless/broadcom/b43/
B43LEGACY WIRELESS DRIVER
M: Larry Finger <Larry.Finger@lwfinger.net>
......@@ -2089,7 +2089,7 @@ L: linux-wireless@vger.kernel.org
L: b43-dev@lists.infradead.org
W: http://wireless.kernel.org/en/users/Drivers/b43
S: Maintained
F: drivers/net/wireless/b43legacy/
F: drivers/net/wireless/broadcom/b43legacy/
BACKLIGHT CLASS/SUBSYSTEM
M: Jingoo Han <jingoohan1@gmail.com>
......@@ -2391,7 +2391,7 @@ M: Hante Meuleman <meuleman@broadcom.com>
L: linux-wireless@vger.kernel.org
L: brcm80211-dev-list@broadcom.com
S: Supported
F: drivers/net/wireless/brcm80211/
F: drivers/net/wireless/broadcom/brcm80211/
BROADCOM BNX2FC 10 GIGABIT FCOE DRIVER
M: QLogic-Storage-Upstream@qlogic.com
......@@ -3101,7 +3101,7 @@ F: sound/pci/cs5535audio/
CW1200 WLAN driver
M: Solomon Peachy <pizza@shaftnet.org>
S: Maintained
F: drivers/net/wireless/cw1200/
F: drivers/net/wireless/st/cw1200/
CX18 VIDEO4LINUX DRIVER
M: Andy Walls <awalls@md.metrocast.net>
......@@ -5041,7 +5041,7 @@ L: hostap@shmoo.com (subscribers-only)
L: linux-wireless@vger.kernel.org
W: http://hostap.epitest.fi/
S: Maintained
F: drivers/net/wireless/hostap/
F: drivers/net/wireless/intersil/hostap/
HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
L: platform-driver-x86@vger.kernel.org
......@@ -5609,7 +5609,7 @@ L: linux-wireless@vger.kernel.org
S: Maintained
F: Documentation/networking/README.ipw2100
F: Documentation/networking/README.ipw2200
F: drivers/net/wireless/ipw2x00/
F: drivers/net/wireless/intel/ipw2x00/
INTEL(R) TRACE HUB
M: Alexander Shishkin <alexander.shishkin@linux.intel.com>
......@@ -5643,7 +5643,7 @@ INTEL WIRELESS 3945ABG/BG, 4965AGN (iwlegacy)
M: Stanislaw Gruszka <sgruszka@redhat.com>
L: linux-wireless@vger.kernel.org
S: Supported
F: drivers/net/wireless/iwlegacy/
F: drivers/net/wireless/intel/iwlegacy/
INTEL WIRELESS WIFI LINK (iwlwifi)
M: Johannes Berg <johannes.berg@intel.com>
......@@ -5653,7 +5653,7 @@ L: linux-wireless@vger.kernel.org
W: http://intellinuxwireless.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi.git
S: Supported
F: drivers/net/wireless/iwlwifi/
F: drivers/net/wireless/intel/iwlwifi/
INTEL MANAGEMENT ENGINE (mei)
M: Tomas Winkler <tomas.winkler@intel.com>
......@@ -6703,7 +6703,7 @@ F: drivers/net/ethernet/marvell/sk*
MARVELL LIBERTAS WIRELESS DRIVER
L: libertas-dev@lists.infradead.org
S: Orphan
F: drivers/net/wireless/libertas/
F: drivers/net/wireless/marvell/libertas/
MARVELL MV643XX ETHERNET DRIVER
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
......@@ -6723,13 +6723,13 @@ M: Amitkumar Karwar <akarwar@marvell.com>
M: Nishant Sarmukadam <nishants@marvell.com>
L: linux-wireless@vger.kernel.org
S: Maintained
F: drivers/net/wireless/mwifiex/
F: drivers/net/wireless/marvell/mwifiex/
MARVELL MWL8K WIRELESS DRIVER
M: Lennert Buytenhek <buytenh@wantstofly.org>
L: linux-wireless@vger.kernel.org
S: Odd Fixes
F: drivers/net/wireless/mwl8k.c
F: drivers/net/wireless/marvell/mwl8k.c
MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
M: Nicolas Pitre <nico@fluxnic.net>
......@@ -7933,7 +7933,7 @@ L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/orinoco
W: http://www.nongnu.org/orinoco/
S: Orphan
F: drivers/net/wireless/orinoco/
F: drivers/net/wireless/intersil/orinoco/
OSD LIBRARY and FILESYSTEM
M: Boaz Harrosh <ooo@electrozaur.com>
......@@ -7959,7 +7959,7 @@ M: Christian Lamparter <chunkeey@googlemail.com>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/p54
S: Maintained
F: drivers/net/wireless/p54/
F: drivers/net/wireless/intersil/p54/
PA SEMI ETHERNET DRIVER
M: Olof Johansson <olof@lixom.net>
......@@ -8501,7 +8501,7 @@ M: "Luis R. Rodriguez" <mcgrof@gmail.com>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/p54
S: Obsolete
F: drivers/net/wireless/prism54/
F: drivers/net/wireless/intersil/prism54/
PS3 NETWORK SUPPORT
M: Geoff Levand <geoff@infradead.org>
......@@ -8804,7 +8804,7 @@ M: Stanislaw Gruszka <sgruszka@redhat.com>
M: Helmut Schaa <helmut.schaa@googlemail.com>
L: linux-wireless@vger.kernel.org
S: Maintained
F: drivers/net/wireless/rt2x00/
F: drivers/net/wireless/ralink/rt2x00/
RAMDISK RAM BLOCK DEVICE DRIVER
M: Jens Axboe <axboe@kernel.dk>
......@@ -9038,7 +9038,7 @@ L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
S: Orphan
F: drivers/net/wireless/rtl818x/rtl8180/
F: drivers/net/wireless/realtek/rtl818x/rtl8180/
RTL8187 WIRELESS DRIVER
M: Herton Ronaldo Krzesinski <herton@canonical.com>
......@@ -9048,7 +9048,7 @@ L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
S: Maintained
F: drivers/net/wireless/rtl818x/rtl8187/
F: drivers/net/wireless/realtek/rtl818x/rtl8187/
RTL8192CE WIRELESS DRIVER
M: Larry Finger <Larry.Finger@lwfinger.net>
......@@ -9057,8 +9057,8 @@ L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
S: Maintained
F: drivers/net/wireless/rtlwifi/
F: drivers/net/wireless/rtlwifi/rtl8192ce/
F: drivers/net/wireless/realtek/rtlwifi/
F: drivers/net/wireless/realtek/rtlwifi/rtl8192ce/
RTL8XXXU WIRELESS DRIVER (rtl8xxxu)
M: Jes Sorensen <Jes.Sorensen@redhat.com>
......@@ -11255,7 +11255,7 @@ USB ZD1201 DRIVER
L: linux-wireless@vger.kernel.org
W: http://linux-lc100020.sourceforge.net
S: Orphan
F: drivers/net/wireless/zd1201.*
F: drivers/net/wireless/zydas/zd1201.*
USB ZR364XX DRIVER
M: Antoine Jacquet <royale@zerezo.com>
......@@ -11886,7 +11886,7 @@ W: http://zd1211.ath.cx/wiki/DriverRewrite
L: linux-wireless@vger.kernel.org
L: zd1211-devs@lists.sourceforge.net (subscribers-only)
S: Maintained
F: drivers/net/wireless/zd1211rw/
F: drivers/net/wireless/zydas/zd1211rw/
ZPOOL COMPRESSED PAGE STORAGE API
M: Dan Streetman <ddstreet@ieee.org>
......
drivers/net/wireless/Kconfig
View file @ c52fd05a
......@@ -17,6 +17,22 @@ menuconfig WLAN
if WLAN
source "drivers/net/wireless/admtek/Kconfig"
source "drivers/net/wireless/ath/Kconfig"
source "drivers/net/wireless/atmel/Kconfig"
source "drivers/net/wireless/broadcom/Kconfig"
source "drivers/net/wireless/cisco/Kconfig"
source "drivers/net/wireless/intel/Kconfig"
source "drivers/net/wireless/intersil/Kconfig"
source "drivers/net/wireless/marvell/Kconfig"
source "drivers/net/wireless/mediatek/Kconfig"
source "drivers/net/wireless/ralink/Kconfig"
source "drivers/net/wireless/realtek/Kconfig"
source "drivers/net/wireless/rsi/Kconfig"
source "drivers/net/wireless/st/Kconfig"
source "drivers/net/wireless/ti/Kconfig"
source "drivers/net/wireless/zydas/Kconfig"
config PCMCIA_RAYCS
tristate "Aviator/Raytheon 2.4GHz wireless support"
depends on PCMCIA
......@@ -32,110 +48,6 @@ config PCMCIA_RAYCS
To compile this driver as a module, choose M here: the module will be
called ray_cs. If unsure, say N.
config LIBERTAS_THINFIRM
tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
depends on MAC80211
select FW_LOADER
---help---
A library for Marvell Libertas 8xxx devices using thinfirm.
config LIBERTAS_THINFIRM_DEBUG
bool "Enable full debugging output in the Libertas thin firmware module."
depends on LIBERTAS_THINFIRM
---help---
Debugging support.
config LIBERTAS_THINFIRM_USB
tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
depends on LIBERTAS_THINFIRM && USB
---help---
A driver for Marvell Libertas 8388 USB devices using thinfirm.
config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
depends on CFG80211 && ISA_DMA_API && (PCI || BROKEN)
select WIRELESS_EXT
select CRYPTO
select WEXT_SPY
select WEXT_PRIV
---help---
This is the standard Linux driver to support Cisco/Aironet ISA and
PCI 802.11 wireless cards.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
This driver support both the standard Linux Wireless Extensions
and Cisco proprietary API, so both the Linux Wireless Tools and the
Cisco Linux utilities can be used to configure the card.
The driver can be compiled as a module and will be named "airo".
config ATMEL
tristate "Atmel at76c50x chipset 802.11b support"
depends on CFG80211 && (PCI || PCMCIA)
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
select CRC32
---help---
A driver 802.11b wireless cards based on the Atmel fast-vnet
chips. This driver supports standard Linux wireless extensions.
Many cards based on this chipset do not have flash memory
and need their firmware loaded at start-up. If yours is
one of these, you will need to provide a firmware image
to be loaded into the card by the driver. The Atmel
firmware package can be downloaded from
<http://www.thekelleys.org.uk/atmel>
config PCI_ATMEL
tristate "Atmel at76c506 PCI cards"
depends on ATMEL && PCI
---help---
Enable support for PCI and mini-PCI cards containing the
Atmel at76c506 chip.
config PCMCIA_ATMEL
tristate "Atmel at76c502/at76c504 PCMCIA cards"
depends on ATMEL && PCMCIA
select WIRELESS_EXT
select FW_LOADER
select CRC32
---help---
Enable support for PCMCIA cards containing the
Atmel at76c502 and at76c504 chips.
config AT76C50X_USB
tristate "Atmel at76c503/at76c505/at76c505a USB cards"
depends on MAC80211 && USB
select FW_LOADER
---help---
Enable support for USB Wireless devices using Atmel at76c503,
at76c505 or at76c505a chips.
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
depends on CFG80211 && PCMCIA && (BROKEN || !M32R)
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
select CRYPTO
select CRYPTO_AES
---help---
This is the standard Linux driver to support Cisco/Aironet PCMCIA
802.11 wireless cards. This driver is the same as the Aironet
driver part of the Linux Pcmcia package.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
802.11b cards.
This driver support both the standard Linux Wireless Extensions
and Cisco proprietary API, so both the Linux Wireless Tools and the
Cisco Linux utilities can be used to configure the card.
config PCMCIA_WL3501
tristate "Planet WL3501 PCMCIA cards"
depends on CFG80211 && PCMCIA
......@@ -146,44 +58,18 @@ config PCMCIA_WL3501
It has basic support for Linux wireless extensions and initial
micro support for ethtool.
config PRISM54
tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
depends on PCI
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
select FW_LOADER
---help---
This enables support for FullMAC PCI/Cardbus prism54 devices. This
driver is now deprecated in favor for the SoftMAC driver, p54pci.
p54pci supports FullMAC PCI/Cardbus devices as well.
For more information refer to the p54 wiki:
http://wireless.kernel.org/en/users/Drivers/p54
Note: You need a motherboard with DMA support to use any of these cards
When built as module you get the module prism54
config USB_ZD1201
tristate "USB ZD1201 based Wireless device support"
depends on CFG80211 && USB
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
config MAC80211_HWSIM
tristate "Simulated radio testing tool for mac80211"
depends on MAC80211
---help---
Say Y if you want to use wireless LAN adapters based on the ZyDAS
ZD1201 chip.
This driver makes the adapter appear as a normal Ethernet interface,
typically on wlan0.
The zd1201 device requires external firmware to be loaded.
This can be found at http://linux-lc100020.sourceforge.net/
This driver is a developer testing tool that can be used to test
IEEE 802.11 networking stack (mac80211) functionality. This is not
needed for normal wireless LAN usage and is only for testing. See
Documentation/networking/mac80211_hwsim for more information on how
to use this tool.
To compile this driver as a module, choose M here: the
module will be called zd1201.
To compile this driver as a module, choose M here: the module will be
called mac80211_hwsim. If unsure, say N.
config USB_NET_RNDIS_WLAN
tristate "Wireless RNDIS USB support"
......@@ -214,76 +100,4 @@ config USB_NET_RNDIS_WLAN
If you choose to build a module, it'll be called rndis_wlan.
config ADM8211
tristate "ADMtek ADM8211 support"
depends on MAC80211 && PCI
select CRC32
select EEPROM_93CX6
---help---
This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
Xterasys Cardbus XN-2411b
Blitz NetWave Point PC
TrendNet 221pc
Belkin F5D6001
SMC 2635W
Linksys WPC11 v1
Fiberline FL-WL-200X
3com Office Connect (3CRSHPW796)
Corega WLPCIB-11
SMC 2602W V2 EU
D-Link DWL-520 Revision C
However, some of these cards have been replaced with other chips
like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
the Ralink RT2400 (SMC2635W) without a model number change.
Thanks to Infineon-ADMtek for their support of this driver.
source "drivers/net/wireless/realtek/rtl818x/Kconfig"
config MAC80211_HWSIM
tristate "Simulated radio testing tool for mac80211"
depends on MAC80211
---help---
This driver is a developer testing tool that can be used to test
IEEE 802.11 networking stack (mac80211) functionality. This is not
needed for normal wireless LAN usage and is only for testing. See
Documentation/networking/mac80211_hwsim for more information on how
to use this tool.
To compile this driver as a module, choose M here: the module will be
called mac80211_hwsim. If unsure, say N.
config MWL8K
tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
depends on MAC80211 && PCI
---help---
This driver supports Marvell TOPDOG 802.11 wireless cards.
To compile this driver as a module, choose M here: the module
will be called mwl8k. If unsure, say N.
source "drivers/net/wireless/ath/Kconfig"
source "drivers/net/wireless/b43/Kconfig"
source "drivers/net/wireless/b43legacy/Kconfig"
source "drivers/net/wireless/brcm80211/Kconfig"
source "drivers/net/wireless/hostap/Kconfig"
source "drivers/net/wireless/ipw2x00/Kconfig"
source "drivers/net/wireless/iwlwifi/Kconfig"
source "drivers/net/wireless/iwlegacy/Kconfig"
source "drivers/net/wireless/libertas/Kconfig"
source "drivers/net/wireless/orinoco/Kconfig"
source "drivers/net/wireless/p54/Kconfig"
source "drivers/net/wireless/rt2x00/Kconfig"
source "drivers/net/wireless/mediatek/Kconfig"
source "drivers/net/wireless/realtek/rtlwifi/Kconfig"
source "drivers/net/wireless/realtek/rtl8xxxu/Kconfig"
source "drivers/net/wireless/ti/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
source "drivers/net/wireless/mwifiex/Kconfig"
source "drivers/net/wireless/cw1200/Kconfig"
source "drivers/net/wireless/rsi/Kconfig"
endif # WLAN
drivers/net/wireless/Makefile
View file @ c52fd05a
......@@ -2,27 +2,21 @@
# Makefile for the Linux Wireless network device drivers.
#
obj-$(CONFIG_IPW2100) += ipw2x00/
obj-$(CONFIG_IPW2200) += ipw2x00/
obj-$(CONFIG_HERMES) += orinoco/
obj-$(CONFIG_AIRO) += airo.o
obj-$(CONFIG_AIRO_CS) += airo_cs.o airo.o
obj-$(CONFIG_ATMEL) += atmel.o
obj-$(CONFIG_PCI_ATMEL) += atmel_pci.o
obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o
obj-$(CONFIG_AT76C50X_USB) += at76c50x-usb.o
obj-$(CONFIG_PRISM54) += prism54/
obj-$(CONFIG_HOSTAP) += hostap/
obj-$(CONFIG_B43) += b43/
obj-$(CONFIG_B43LEGACY) += b43legacy/
obj-$(CONFIG_ZD1211RW) += zd1211rw/
obj-$(CONFIG_WLAN) += realtek/
obj-$(CONFIG_WLAN_VENDOR_ADMTEK) += admtek/
obj-$(CONFIG_WLAN_VENDOR_ATH) += ath/
obj-$(CONFIG_WLAN_VENDOR_ATMEL) += atmel/
obj-$(CONFIG_WLAN_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_WLAN_VENDOR_CISCO) += cisco/
obj-$(CONFIG_WLAN_VENDOR_INTEL) += intel/
obj-$(CONFIG_WLAN_VENDOR_INTERSIL) += intersil/
obj-$(CONFIG_WLAN_VENDOR_MARVELL) += marvell/
obj-$(CONFIG_WLAN_VENDOR_MEDIATEK) += mediatek/
obj-$(CONFIG_WLAN_VENDOR_RALINK) += ralink/
obj-$(CONFIG_WLAN_VENDOR_REALTEK) += realtek/
obj-$(CONFIG_WLAN_VENDOR_RSI) += rsi/
obj-$(CONFIG_WLAN_VENDOR_ST) += st/
obj-$(CONFIG_WLAN_VENDOR_TI) += ti/
obj-$(CONFIG_WLAN_VENDOR_ZYDAS) += zydas/
# 16-bit wireless PCMCIA client drivers
obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o
......@@ -30,33 +24,4 @@ obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o
obj-$(CONFIG_USB_NET_RNDIS_WLAN) += rndis_wlan.o
obj-$(CONFIG_USB_ZD1201) += zd1201.o
obj-$(CONFIG_LIBERTAS) += libertas/
obj-$(CONFIG_LIBERTAS_THINFIRM) += libertas_tf/
obj-$(CONFIG_ADM8211) += adm8211.o
obj-$(CONFIG_MWL8K) += mwl8k.o
obj-$(CONFIG_IWLWIFI) += iwlwifi/
obj-$(CONFIG_IWLEGACY) += iwlegacy/
obj-$(CONFIG_RT2X00) += rt2x00/
obj-$(CONFIG_WL_MEDIATEK) += mediatek/
obj-$(CONFIG_P54_COMMON) += p54/
obj-$(CONFIG_ATH_CARDS) += ath/
obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o
obj-$(CONFIG_WL_TI) += ti/
obj-$(CONFIG_MWIFIEX) += mwifiex/
obj-$(CONFIG_BRCMFMAC) += brcm80211/
obj-$(CONFIG_BRCMSMAC) += brcm80211/
obj-$(CONFIG_CW1200) += cw1200/
obj-$(CONFIG_RSI_91X) += rsi/
drivers/net/wireless/admtek/Kconfig 0 → 100644
View file @ c52fd05a
config WLAN_VENDOR_ADMTEK
bool "ADMtek devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_ADMTEK
config ADM8211
tristate "ADMtek ADM8211 support"
depends on MAC80211 && PCI
select CRC32
select EEPROM_93CX6
---help---
This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
Xterasys Cardbus XN-2411b
Blitz NetWave Point PC
TrendNet 221pc
Belkin F5D6001
SMC 2635W
Linksys WPC11 v1
Fiberline FL-WL-200X
3com Office Connect (3CRSHPW796)
Corega WLPCIB-11
SMC 2602W V2 EU
D-Link DWL-520 Revision C
However, some of these cards have been replaced with other chips
like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
the Ralink RT2400 (SMC2635W) without a model number change.
Thanks to Infineon-ADMtek for their support of this driver.
endif # WLAN_VENDOR_ADMTEK
drivers/net/wireless/admtek/Makefile 0 → 100644
View file @ c52fd05a
obj-$(CONFIG_ADM8211) += adm8211.o
drivers/net/wireless/ath/Kconfig
View file @ c52fd05a
config ATH_COMMON
tristate
menuconfig ATH_CARDS
tristate "Atheros Wireless Cards"
depends on CFG80211 && (!UML || BROKEN)
config WLAN_VENDOR_ATH
bool "Atheros/Qualcomm devices"
default y
---help---
This will enable the support for the Atheros wireless drivers.
ath5k, ath9k, ath9k_htc and ar9170 drivers share some common code, this option
enables the common ath.ko module which shares common helpers.
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
For more information and documentation on this module you can visit:
......@@ -17,7 +20,7 @@ menuconfig ATH_CARDS
http://wireless.kernel.org/en/users/Drivers/Atheros
if ATH_CARDS
if WLAN_VENDOR_ATH
config ATH_DEBUG
bool "Atheros wireless debugging"
......
drivers/net/wireless/atmel/Kconfig 0 → 100644
View file @ c52fd05a
config WLAN_VENDOR_ATMEL
bool "Atmel devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_ATMEL
config ATMEL
tristate "Atmel at76c50x chipset 802.11b support"
depends on CFG80211 && (PCI || PCMCIA)
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
select CRC32
---help---
A driver 802.11b wireless cards based on the Atmel fast-vnet
chips. This driver supports standard Linux wireless extensions.
Many cards based on this chipset do not have flash memory
and need their firmware loaded at start-up. If yours is
one of these, you will need to provide a firmware image
to be loaded into the card by the driver. The Atmel
firmware package can be downloaded from
<http://www.thekelleys.org.uk/atmel>
config PCI_ATMEL
tristate "Atmel at76c506 PCI cards"
depends on ATMEL && PCI
---help---
Enable support for PCI and mini-PCI cards containing the
Atmel at76c506 chip.
config PCMCIA_ATMEL
tristate "Atmel at76c502/at76c504 PCMCIA cards"
depends on ATMEL && PCMCIA
select WIRELESS_EXT
select FW_LOADER
select CRC32
---help---
Enable support for PCMCIA cards containing the
Atmel at76c502 and at76c504 chips.
config AT76C50X_USB
tristate "Atmel at76c503/at76c505/at76c505a USB cards"
depends on MAC80211 && USB
select FW_LOADER
---help---
Enable support for USB Wireless devices using Atmel at76c503,
at76c505 or at76c505a chips.
endif # WLAN_VENDOR_ATMEL
drivers/net/wireless/atmel/Makefile 0 → 100644
View file @ c52fd05a
obj-$(CONFIG_ATMEL) += atmel.o
obj-$(CONFIG_PCI_ATMEL) += atmel_pci.o
obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o
obj-$(CONFIG_AT76C50X_USB) += at76c50x-usb.o
drivers/net/wireless/broadcom/Kconfig 0 → 100644
View file @ c52fd05a
config WLAN_VENDOR_BROADCOM
bool "Broadcom devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_BROADCOM
source "drivers/net/wireless/broadcom/b43/Kconfig"
source "drivers/net/wireless/broadcom/b43legacy/Kconfig"
source "drivers/net/wireless/broadcom/brcm80211/Kconfig"
endif # WLAN_VENDOR_BROADCOM
drivers/net/wireless/broadcom/Makefile 0 → 100644
View file @ c52fd05a
obj-$(CONFIG_B43) += b43/
obj-$(CONFIG_B43LEGACY) += b43legacy/
obj-$(CONFIG_BRCMFMAC) += brcm80211/
obj-$(CONFIG_BRCMSMAC) += brcm80211/
drivers/net/wireless/brcm80211/brcmfmac/Makefile → drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile
View file @ c52fd05a
......@@ -16,8 +16,8 @@
# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
ccflags-y += \
-Idrivers/net/wireless/brcm80211/brcmfmac \
-Idrivers/net/wireless/brcm80211/include
-Idrivers/net/wireless/broadcom/brcm80211/brcmfmac \
-Idrivers/net/wireless/broadcom/brcm80211/include
ccflags-y += -D__CHECK_ENDIAN__
......
drivers/net/wireless/brcm80211/brcmsmac/Makefile → drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile
View file @ c52fd05a
......@@ -17,9 +17,9 @@
ccflags-y := \
-D__CHECK_ENDIAN__ \
-Idrivers/net/wireless/brcm80211/brcmsmac \
-Idrivers/net/wireless/brcm80211/brcmsmac/phy \
-Idrivers/net/wireless/brcm80211/include
-Idrivers/net/wireless/broadcom/brcm80211/brcmsmac \
-Idrivers/net/wireless/broadcom/brcm80211/brcmsmac/phy \
-Idrivers/net/wireless/broadcom/brcm80211/include
brcmsmac-y := \
mac80211_if.o \
......
drivers/net/wireless/brcm80211/brcmutil/Makefile → drivers/net/wireless/broadcom/brcm80211/brcmutil/Makefile
View file @ c52fd05a
......@@ -16,8 +16,8 @@
# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
ccflags-y := \
-Idrivers/net/wireless/brcm80211/brcmutil \
-Idrivers/net/wireless/brcm80211/include
-Idrivers/net/wireless/broadcom/brcm80211/brcmutil \
-Idrivers/net/wireless/broadcom/brcm80211/include
obj-$(CONFIG_BRCMUTIL) += brcmutil.o
brcmutil-objs = utils.o d11.o
drivers/net/wireless/cisco/Kconfig 0 → 100644
View file @ c52fd05a
config WLAN_VENDOR_CISCO
bool "Cisco devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_CISCO
config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
depends on CFG80211 && ISA_DMA_API && (PCI || BROKEN)
select WIRELESS_EXT
select CRYPTO
select WEXT_SPY
select WEXT_PRIV
---help---
This is the standard Linux driver to support Cisco/Aironet ISA and
PCI 802.11 wireless cards.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
This driver support both the standard Linux Wireless Extensions
and Cisco proprietary API, so both the Linux Wireless Tools and the
Cisco Linux utilities can be used to configure the card.
The driver can be compiled as a module and will be named "airo".
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
depends on CFG80211 && PCMCIA && (BROKEN || !M32R)
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
select CRYPTO
select CRYPTO_AES
---help---
This is the standard Linux driver to support Cisco/Aironet PCMCIA
802.11 wireless cards. This driver is the same as the Aironet
driver part of the Linux Pcmcia package.
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- with or without encryption) as well as card before the Cisco
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
802.11b cards.
This driver support both the standard Linux Wireless Extensions
and Cisco proprietary API, so both the Linux Wireless Tools and the
Cisco Linux utilities can be used to configure the card.
endif # WLAN_VENDOR_CISCO
drivers/net/wireless/cisco/Makefile 0 → 100644
View file @ c52fd05a
obj-$(CONFIG_AIRO) += airo.o
obj-$(CONFIG_AIRO_CS) += airo_cs.o airo.o
drivers/net/wireless/intel/Kconfig 0 → 100644
View file @ c52fd05a
config WLAN_VENDOR_INTEL
bool "Intel devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_INTEL
source "drivers/net/wireless/intel/ipw2x00/Kconfig"
source "drivers/net/wireless/intel/iwlegacy/Kconfig"
source "drivers/net/wireless/intel/iwlwifi/Kconfig"
endif # WLAN_VENDOR_INTEL
drivers/net/wireless/intel/Makefile 0 → 100644
View file @ c52fd05a
obj-$(CONFIG_IPW2100) += ipw2x00/
obj-$(CONFIG_IPW2200) += ipw2x00/
obj-$(CONFIG_IWLEGACY) += iwlegacy/
obj-$(CONFIG_IWLWIFI) += iwlwifi/
drivers/net/wireless/intersil/Kconfig 0 → 100644
View file @ c52fd05a
config WLAN_VENDOR_INTERSIL
bool "Intersil devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_INTERSIL
source "drivers/net/wireless/intersil/hostap/Kconfig"
source "drivers/net/wireless/intersil/orinoco/Kconfig"
source "drivers/net/wireless/intersil/p54/Kconfig"
config PRISM54
tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
depends on PCI
select WIRELESS_EXT
select WEXT_SPY
select WEXT_PRIV
select FW_LOADER
---help---
This enables support for FullMAC PCI/Cardbus prism54 devices. This
driver is now deprecated in favor for the SoftMAC driver, p54pci.
p54pci supports FullMAC PCI/Cardbus devices as well.
For more information refer to the p54 wiki:
http://wireless.kernel.org/en/users/Drivers/p54
Note: You need a motherboard with DMA support to use any of these cards
When built as module you get the module prism54
endif # WLAN_VENDOR_INTERSIL
drivers/net/wireless/intersil/Makefile 0 → 100644
View file @ c52fd05a
obj-$(CONFIG_HOSTAP) += hostap/
obj-$(CONFIG_HERMES) += orinoco/
obj-$(CONFIG_P54_COMMON) += p54/
obj-$(CONFIG_PRISM54) += prism54/
drivers/net/wireless/marvell/Kconfig 0 → 100644
View file @ c52fd05a
config WLAN_VENDOR_MARVELL
bool "Marvell devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_MARVELL
source "drivers/net/wireless/marvell/libertas/Kconfig"
source "drivers/net/wireless/marvell/libertas_tf/Kconfig"
source "drivers/net/wireless/marvell/mwifiex/Kconfig"
config MWL8K
tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
depends on MAC80211 && PCI
---help---
This driver supports Marvell TOPDOG 802.11 wireless cards.
To compile this driver as a module, choose M here: the module
will be called mwl8k. If unsure, say N.
endif # WLAN_VENDOR_MARVELL
drivers/net/wireless/marvell/Makefile 0 → 100644
View file @ c52fd05a
obj-$(CONFIG_LIBERTAS) += libertas/
obj-$(CONFIG_LIBERTAS_THINFIRM) += libertas_tf/
obj-$(CONFIG_MWIFIEX) += mwifiex/
obj-$(CONFIG_MWL8K) += mwl8k.o
drivers/net/wireless/marvell/libertas_tf/Kconfig 0 → 100644
View file @ c52fd05a
config LIBERTAS_THINFIRM
tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
depends on MAC80211
select FW_LOADER
---help---
A library for Marvell Libertas 8xxx devices using thinfirm.
config LIBERTAS_THINFIRM_DEBUG
bool "Enable full debugging output in the Libertas thin firmware module."
depends on LIBERTAS_THINFIRM
---help---
Debugging support.
config LIBERTAS_THINFIRM_USB
tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
depends on LIBERTAS_THINFIRM && USB
---help---
A driver for Marvell Libertas 8388 USB devices using thinfirm.
drivers/net/wireless/mediatek/Kconfig
View file @ c52fd05a
menuconfig WL_MEDIATEK
bool "Mediatek Wireless LAN support"
config WLAN_VENDOR_MEDIATEK
bool "MediaTek devices"
default y
---help---
Enable community drivers for MediaTek WiFi devices.
Those drivers make use of the Linux mac80211 stack.
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WL_MEDIATEK
if WLAN_VENDOR_MEDIATEK
source "drivers/net/wireless/mediatek/mt7601u/Kconfig"
endif # WL_MEDIATEK
endif # WLAN_VENDOR_MEDIATEK
drivers/net/wireless/ralink/Kconfig 0 → 100644
View file @ c52fd05a
config WLAN_VENDOR_RALINK
bool "Ralink devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_RALINK
source "drivers/net/wireless/ralink/rt2x00/Kconfig"
endif # WLAN_VENDOR_RALINK
drivers/net/wireless/ralink/Makefile 0 → 100644
View file @ c52fd05a
obj-$(CONFIG_RT2X00) += rt2x00/
drivers/net/wireless/realtek/Kconfig 0 → 100644
View file @ c52fd05a
config WLAN_VENDOR_REALTEK
bool "Realtek devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_REALTEK
source "drivers/net/wireless/realtek/rtl818x/Kconfig"
source "drivers/net/wireless/realtek/rtlwifi/Kconfig"
source "drivers/net/wireless/realtek/rtl8xxxu/Kconfig"
endif # WLAN_VENDOR_REALTEK
drivers/net/wireless/rsi/Kconfig
View file @ c52fd05a
config WLAN_VENDOR_RSI
bool "Redpine Signals Inc devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_RSI
config RSI_91X
tristate "Redpine Signals Inc 91x WLAN driver support"
depends on MAC80211
......@@ -28,3 +41,5 @@ config RSI_USB
---help---
This option enables the USB bus support in rsi drivers.
Select M (recommended), if you have a RSI 1x1 wireless module.
endif # WLAN_VENDOR_RSI
drivers/net/wireless/st/Kconfig 0 → 100644
View file @ c52fd05a
config WLAN_VENDOR_ST
bool "STMicroelectronics devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_ST
source "drivers/net/wireless/st/cw1200/Kconfig"
endif # WLAN_VENDOR_ST
drivers/net/wireless/st/Makefile 0 → 100644
View file @ c52fd05a
obj-$(CONFIG_CW1200) += cw1200/
drivers/net/wireless/ti/Kconfig
View file @ c52fd05a
menuconfig WL_TI
bool "TI Wireless LAN support"
config WLAN_VENDOR_TI
bool "Texas Instrument devices"
default y
---help---
This section contains support for all the wireless drivers
for Texas Instruments WLAN chips, such as wl1251 and the wl12xx
family.
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WL_TI
if WLAN_VENDOR_TI
source "drivers/net/wireless/ti/wl1251/Kconfig"
source "drivers/net/wireless/ti/wl12xx/Kconfig"
source "drivers/net/wireless/ti/wl18xx/Kconfig"
......@@ -21,4 +25,4 @@ config WILINK_PLATFORM_DATA
Small platform data bit needed to pass data to the sdio modules.
endif # WL_TI
endif # WLAN_VENDOR_TI
drivers/net/wireless/ti/wl1251/Kconfig
View file @ c52fd05a
menuconfig WL1251
config WL1251
tristate "TI wl1251 driver support"
depends on MAC80211
select FW_LOADER
......
drivers/net/wireless/ti/wlcore/Kconfig
View file @ c52fd05a
config WLCORE
tristate "TI wlcore support"
depends on WL_TI && MAC80211
depends on MAC80211
select FW_LOADER
---help---
This module contains the main code for TI WLAN chips. It abstracts
......
drivers/net/wireless/zydas/Kconfig 0 → 100644
View file @ c52fd05a
config WLAN_VENDOR_ZYDAS
bool "ZyDAS devices"
default y
---help---
If you have a wireless card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about cards. If you say Y, you will be asked for
your specific card in the following questions.
if WLAN_VENDOR_ZYDAS
config USB_ZD1201
tristate "USB ZD1201 based Wireless device support"
depends on CFG80211 && USB
select WIRELESS_EXT
select WEXT_PRIV
select FW_LOADER
---help---
Say Y if you want to use wireless LAN adapters based on the ZyDAS
ZD1201 chip.
This driver makes the adapter appear as a normal Ethernet interface,
typically on wlan0.
The zd1201 device requires external firmware to be loaded.
This can be found at http://linux-lc100020.sourceforge.net/
To compile this driver as a module, choose M here: the
module will be called zd1201.
source "drivers/net/wireless/zydas/zd1211rw/Kconfig"
endif # WLAN_VENDOR_ZYDAS
drivers/net/wireless/zydas/Makefile 0 → 100644
View file @ c52fd05a
obj-$(CONFIG_ZD1211RW) += zd1211rw/
obj-$(CONFIG_USB_ZD1201) += zd1201.o
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7