Commit c530d23a authored by Lothar Waßmann's avatar Lothar Waßmann Committed by Shawn Guo

ARM: dts: imx6ul: specify proper clocks for the PWM nodes

i.MX6UL PWMs require real clocks. Define the appropriate clocks for
the PWM units.
Signed-off-by: default avatarLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent d97ca99f
...@@ -508,8 +508,8 @@ pwm5: pwm@020f0000 { ...@@ -508,8 +508,8 @@ pwm5: pwm@020f0000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020f0000 0x4000>; reg = <0x020f0000 0x4000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_DUMMY>, clocks = <&clks IMX6UL_CLK_PWM5>,
<&clks IMX6UL_CLK_DUMMY>; <&clks IMX6UL_CLK_PWM5>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
#pwm-cells = <2>; #pwm-cells = <2>;
}; };
...@@ -518,8 +518,8 @@ pwm6: pwm@020f4000 { ...@@ -518,8 +518,8 @@ pwm6: pwm@020f4000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020f4000 0x4000>; reg = <0x020f4000 0x4000>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_DUMMY>, clocks = <&clks IMX6UL_CLK_PWM6>,
<&clks IMX6UL_CLK_DUMMY>; <&clks IMX6UL_CLK_PWM6>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
#pwm-cells = <2>; #pwm-cells = <2>;
}; };
...@@ -528,8 +528,8 @@ pwm7: pwm@020f8000 { ...@@ -528,8 +528,8 @@ pwm7: pwm@020f8000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020f8000 0x4000>; reg = <0x020f8000 0x4000>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_DUMMY>, clocks = <&clks IMX6UL_CLK_PWM7>,
<&clks IMX6UL_CLK_DUMMY>; <&clks IMX6UL_CLK_PWM7>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
#pwm-cells = <2>; #pwm-cells = <2>;
}; };
...@@ -538,8 +538,8 @@ pwm8: pwm@020fc000 { ...@@ -538,8 +538,8 @@ pwm8: pwm@020fc000 {
compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm"; compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
reg = <0x020fc000 0x4000>; reg = <0x020fc000 0x4000>;
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_DUMMY>, clocks = <&clks IMX6UL_CLK_PWM8>,
<&clks IMX6UL_CLK_DUMMY>; <&clks IMX6UL_CLK_PWM8>;
clock-names = "ipg", "per"; clock-names = "ipg", "per";
#pwm-cells = <2>; #pwm-cells = <2>;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment