Skip to content

L
linux
Commit c65f2abf authored by Rob Herring's avatar Rob Herring
Browse files
Options

ARM: remove ixp23xx and ixp2000 platforms 

ixp2xxx platforms have had no real changes since ~2006 and the maintainer
has said on irc that they can be removed:

13:05 < nico> do you still care about ixp2000?
13:22 < lennert> not really, no
13:58 < nico> do you think we could remove it from the kernel tree?
14:01 < lennert> go for it, and remove ixp23xx too while you're at it

Removing will help simplify ARM consolidation in general and PCI re-work
specifically.
Signed-off-by: default avatarRob Herring <rob.herring@calxeda.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: default avatarLennert Buytenhek <buytenh@wantstofly.org>
parent dd775ae2
Expand all Show whitespace changes
Inline Side-by-side
Showing with 0 additions and 6950 deletions
Documentation/arm/00-INDEX
View file @ c65f2abf
......@@ -4,8 +4,6 @@ Booting
- requirements for booting
Interrupts
- ARM Interrupt subsystem documentation
IXP2000
- Release Notes for Linux on Intel's IXP2000 Network Processor
msm
- MSM specific documentation
Netwinder
......
Documentation/arm/IXP2000 deleted 100644 → 0
View file @ dd775ae2
-------------------------------------------------------------------------
Release Notes for Linux on Intel's IXP2000 Network Processor
Maintained by Deepak Saxena <dsaxena@plexity.net>
-------------------------------------------------------------------------
1. Overview
Intel's IXP2000 family of NPUs (IXP2400, IXP2800, IXP2850) is designed
for high-performance network applications such high-availability
telecom systems. In addition to an XScale core, it contains up to 8
"MicroEngines" that run special code, several high-end networking
interfaces (UTOPIA, SPI, etc), a PCI host bridge, one serial port,
flash interface, and some other odds and ends. For more information, see:
http://developer.intel.com
2. Linux Support
Linux currently supports the following features on the IXP2000 NPUs:
- On-chip serial
- PCI
- Flash (MTD/JFFS2)
- I2C through GPIO
- Timers (watchdog, OS)
That is about all we can support under Linux ATM b/c the core networking
components of the chip are accessed via Intel's closed source SDK.
Please contact Intel directly on issues with using those. There is
also a mailing list run by some folks at Princeton University that might
be of help: https://lists.cs.princeton.edu/mailman/listinfo/ixp2xxx
WHATEVER YOU DO, DO NOT POST EMAIL TO THE LINUX-ARM OR LINUX-ARM-KERNEL
MAILING LISTS REGARDING THE INTEL SDK.
3. Supported Platforms
- Intel IXDP2400 Reference Platform
- Intel IXDP2800 Reference Platform
- Intel IXDP2401 Reference Platform
- Intel IXDP2801 Reference Platform
- RadiSys ENP-2611
4. Usage Notes
- The IXP2000 platforms usually have rather complex PCI bus topologies
with large memory space requirements. In addition, b/c of the way the
Intel SDK is designed, devices are enumerated in a very specific
way. B/c of this this, we use "pci=firmware" option in the kernel
command line so that we do not re-enumerate the bus.
- IXDP2x01 systems have variable clock tick rates that we cannot determine
via HW registers. The "ixdp2x01_clk=XXX" cmd line options allow you
to pass the clock rate to the board port.
5. Thanks
The IXP2000 work has been funded by Intel Corp. and MontaVista Software, Inc.
The following people have contributed patches/comments/etc:
Naeem F. Afzal
Lennert Buytenhek
Jeffrey Daly
-------------------------------------------------------------------------
Last Update: 8/09/2004
MAINTAINERS
View file @ c65f2abf
......@@ -640,13 +640,6 @@ S: Maintained
F: drivers/amba/
F: include/linux/amba/bus.h
ARM/ADI ROADRUNNER MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-ixp23xx/
F: arch/arm/mach-ixp23xx/include/mach/
ARM/ADS SPHERE MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
......@@ -859,21 +852,11 @@ M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
ARM/INTEL IXP2000 ARM ARCHITECTURE
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
ARM/INTEL IXDP2850 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
ARM/INTEL IXP23XX ARM ARCHITECTURE
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
ARM/INTEL IXP4XX ARM ARCHITECTURE
M: Imre Kaloz <kaloz@openwrt.org>
M: Krzysztof Halasa <khc@pm.waw.pl>
......
arch/arm/Kconfig
View file @ c65f2abf
......@@ -527,28 +527,6 @@ config ARCH_IOP33X
help
Support for Intel's IOP33X (XScale) family of processors.
config ARCH_IXP23XX
bool "IXP23XX-based"
depends on MMU
select CPU_XSC3
select PCI
select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
help
Support for Intel's IXP23xx (XScale) family of processors.
config ARCH_IXP2000
bool "IXP2400/2800-based"
depends on MMU
select CPU_XSCALE
select PCI
select ARCH_USES_GETTIMEOFFSET
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
config ARCH_IXP4XX
bool "IXP4xx-based"
depends on MMU
......@@ -1045,10 +1023,6 @@ source "arch/arm/mach-iop13xx/Kconfig"
source "arch/arm/mach-ixp4xx/Kconfig"
source "arch/arm/mach-ixp2000/Kconfig"
source "arch/arm/mach-ixp23xx/Kconfig"
source "arch/arm/mach-kirkwood/Kconfig"
source "arch/arm/mach-ks8695/Kconfig"
......
arch/arm/Makefile
View file @ c65f2abf
......@@ -149,8 +149,6 @@ machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
machine-$(CONFIG_ARCH_IOP32X) := iop32x
machine-$(CONFIG_ARCH_IOP33X) := iop33x
machine-$(CONFIG_ARCH_IXP2000) := ixp2000
machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
machine-$(CONFIG_ARCH_KS8695) := ks8695
......
arch/arm/boot/compressed/head-xscale.S
View file @ c65f2abf
......@@ -32,10 +32,3 @@ __XScale_start:
bic r0, r0, #0x1000 @ clear Icache
mcr p15, 0, r0, c1, c0, 0
#ifdef CONFIG_ARCH_IXP2000
mov r1, #-1
mov r0, #0xd6000000
str r1, [r0, #0x14]
str r1, [r0, #0x18]
#endif
arch/arm/common/Makefile
View file @ c65f2abf
......@@ -11,7 +11,5 @@ obj-$(CONFIG_DMABOUNCE) += dmabounce.o
obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
obj-$(CONFIG_ARCH_IXP2000) += uengine.o
obj-$(CONFIG_ARCH_IXP23XX) += uengine.o
obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
arch/arm/common/uengine.c deleted 100644 → 0
View file @ dd775ae2
This diff is collapsed.
arch/arm/configs/ixp2000_defconfig deleted 100644 → 0
View file @ dd775ae2
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_HOTPLUG is not set
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_IXP2000=y
CONFIG_ARCH_ENP2611=y
CONFIG_ARCH_IXDP2400=y
CONFIG_ARCH_IXDP2800=y
CONFIG_ARCH_IXDP2401=y
CONFIG_ARCH_IXDP2801=y
# CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO is not set
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0"
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
CONFIG_IPV6=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_IXP2000=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_EEPROM_LEGACY=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_CS89x0=y
CONFIG_E100=y
CONFIG_ENP2611_MSF_NET=y
CONFIG_WAN=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_DLCI=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=3
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IXP2000=y
CONFIG_WATCHDOG=y
CONFIG_IXP2000_WATCHDOG=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
arch/arm/configs/ixp23xx_defconfig deleted 100644 → 0
View file @ dd775ae2
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
CONFIG_SLAB=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_IXP23XX=y
CONFIG_MACH_ESPRESSO=y
CONFIG_MACH_IXDP2351=y
CONFIG_MACH_ROADRUNNER=y
# CONFIG_ARM_THUMB is not set
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp"
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
CONFIG_IPV6=y
# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_EEPROM_LEGACY=y
CONFIG_IDE=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_E100=y
CONFIG_E1000=y
CONFIG_WAN=y
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_DLCI=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_WATCHDOG=y
# CONFIG_USB_HID is not set
CONFIG_USB=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_INOTIFY=y
CONFIG_MSDOS_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
arch/arm/include/asm/hardware/uengine.h deleted 100644 → 0
View file @ dd775ae2
/*
* Generic library functions for the microengines found on the Intel
* IXP2000 series of network processors.
*
* Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
* Dedicated to Marija Kulikova.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as
* published by the Free Software Foundation; either version 2.1 of the
* License, or (at your option) any later version.
*/
#ifndef __IXP2000_UENGINE_H
#define __IXP2000_UENGINE_H
extern u32 ixp2000_uengine_mask;
struct ixp2000_uengine_code
{
u32 cpu_model_bitmask;
u8 cpu_min_revision;
u8 cpu_max_revision;
u32 uengine_parameters;
struct ixp2000_reg_value {
int reg;
u32 value;
} *initial_reg_values;
int num_insns;
u8 *insns;
};
u32 ixp2000_uengine_csr_read(int uengine, int offset);
void ixp2000_uengine_csr_write(int uengine, int offset, u32 value);
void ixp2000_uengine_reset(u32 uengine_mask);
void ixp2000_uengine_set_mode(int uengine, u32 mode);
void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns);
void ixp2000_uengine_init_context(int uengine, int context, int pc);
void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask);
void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask);
int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c);
#define IXP2000_UENGINE_8_CONTEXTS 0x00000000
#define IXP2000_UENGINE_4_CONTEXTS 0x80000000
#define IXP2000_UENGINE_PRN_UPDATE_EVERY 0x40000000
#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS 0x00000000
#define IXP2000_UENGINE_NN_FROM_SELF 0x00100000
#define IXP2000_UENGINE_NN_FROM_PREVIOUS 0x00000000
#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3 0x000c0000
#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2 0x00080000
#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1 0x00040000
#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0 0x00000000
#define IXP2000_UENGINE_LM_ADDR1_GLOBAL 0x00020000
#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT 0x00000000
#define IXP2000_UENGINE_LM_ADDR0_GLOBAL 0x00010000
#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT 0x00000000
#endif
arch/arm/mach-ixp2000/Kconfig deleted 100644 → 0
View file @ dd775ae2
if ARCH_IXP2000
config ARCH_SUPPORTS_BIG_ENDIAN
bool
default y
menu "Intel IXP2400/2800 Implementation Options"
comment "IXP2400/2800 Platforms"
config ARCH_ENP2611
bool "Support Radisys ENP-2611"
help
Say 'Y' here if you want your kernel to support the Radisys
ENP2611 PCI network processing card. For more information on
this card, see <file:Documentation/arm/IXP2000>.
config ARCH_IXDP2400
bool "Support Intel IXDP2400"
help
Say 'Y' here if you want your kernel to support the Intel
IXDP2400 reference platform. For more information on
this platform, see <file:Documentation/arm/IXP2000>.
config ARCH_IXDP2800
bool "Support Intel IXDP2800"
help
Say 'Y' here if you want your kernel to support the Intel
IXDP2800 reference platform. For more information on
this platform, see <file:Documentation/arm/IXP2000>.
config ARCH_IXDP2X00
bool
depends on ARCH_IXDP2400 || ARCH_IXDP2800
default y
config ARCH_IXDP2401
bool "Support Intel IXDP2401"
help
Say 'Y' here if you want your kernel to support the Intel
IXDP2401 reference platform. For more information on
this platform, see <file:Documentation/arm/IXP2000>.
config ARCH_IXDP2801
bool "Support Intel IXDP2801 and IXDP28x5"
help
Say 'Y' here if you want your kernel to support the Intel
IXDP2801/2805/2855 reference platforms. For more information on
this platform, see <file:Documentation/arm/IXP2000>.
config MACH_IXDP28X5
bool
depends on ARCH_IXDP2801
default y
config ARCH_IXDP2X01
bool
depends on ARCH_IXDP2401 || ARCH_IXDP2801
default y
config IXP2000_SUPPORT_BROKEN_PCI_IO
bool "Support broken PCI I/O on older IXP2000s"
default y
help
Say 'N' here if you only intend to run your kernel on an
IXP2000 B0 or later model and do not need the PCI I/O
byteswap workaround. Say 'Y' otherwise.
endmenu
endif
arch/arm/mach-ixp2000/Makefile deleted 100644 → 0
View file @ dd775ae2
#
# Makefile for the linux kernel.
#
obj-y := core.o pci.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_ARCH_ENP2611) += enp2611.o
obj-$(CONFIG_ARCH_IXDP2400) += ixdp2400.o
obj-$(CONFIG_ARCH_IXDP2800) += ixdp2800.o
obj-$(CONFIG_ARCH_IXDP2X00) += ixdp2x00.o
obj-$(CONFIG_ARCH_IXDP2X01) += ixdp2x01.o
arch/arm/mach-ixp2000/Makefile.boot deleted 100644 → 0
View file @ dd775ae2
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
arch/arm/mach-ixp2000/core.c deleted 100644 → 0
View file @ dd775ae2
This diff is collapsed.
arch/arm/mach-ixp2000/enp2611.c deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/enp2611.c
*
* Radisys ENP-2611 support.
*
* Created 2004 by Lennert Buytenhek from the ixdp2x01 code. The
* original version carries the following notices:
*
* Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com>
* Maintainer: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright (C) 2002-2003 Intel Corp.
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/pci.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
/*************************************************************************
* ENP-2611 timer tick configuration
*************************************************************************/
static void __init enp2611_timer_init(void)
{
ixp2000_init_time(50 * 1000 * 1000);
}
static struct sys_timer enp2611_timer = {
.init = enp2611_timer_init,
.offset = ixp2000_gettimeoffset,
};
/*************************************************************************
* ENP-2611 I/O
*************************************************************************/
static struct map_desc enp2611_io_desc[] __initdata = {
{
.virtual = ENP2611_CALEB_VIRT_BASE,
.pfn = __phys_to_pfn(ENP2611_CALEB_PHYS_BASE),
.length = ENP2611_CALEB_SIZE,
.type = MT_DEVICE,
}, {
.virtual = ENP2611_PM3386_0_VIRT_BASE,
.pfn = __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE),
.length = ENP2611_PM3386_0_SIZE,
.type = MT_DEVICE,
}, {
.virtual = ENP2611_PM3386_1_VIRT_BASE,
.pfn = __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE),
.length = ENP2611_PM3386_1_SIZE,
.type = MT_DEVICE,
}
};
void __init enp2611_map_io(void)
{
ixp2000_map_io();
iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc));
}
/*************************************************************************
* ENP-2611 PCI
*************************************************************************/
static int enp2611_pci_setup(int nr, struct pci_sys_data *sys)
{
sys->mem_offset = 0xe0000000;
ixp2000_pci_setup(nr, sys);
return 1;
}
static void __init enp2611_pci_preinit(void)
{
ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
ixp2000_pci_preinit();
pcibios_setup("firmware");
}
static inline int enp2611_pci_valid_device(struct pci_bus *bus,
unsigned int devfn)
{
/* The 82559 ethernet controller appears at both PCI:1:0:0 and
* PCI:1:2:0, so let's pretend the second one isn't there.
*/
if (bus->number == 0x01 && devfn == 0x10)
return 0;
return 1;
}
static int enp2611_pci_read_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 *value)
{
if (enp2611_pci_valid_device(bus, devfn))
return ixp2000_pci_read_config(bus, devfn, where, size, value);
return PCIBIOS_DEVICE_NOT_FOUND;
}
static int enp2611_pci_write_config(struct pci_bus *bus, unsigned int devfn,
int where, int size, u32 value)
{
if (enp2611_pci_valid_device(bus, devfn))
return ixp2000_pci_write_config(bus, devfn, where, size, value);
return PCIBIOS_DEVICE_NOT_FOUND;
}
static struct pci_ops enp2611_pci_ops = {
.read = enp2611_pci_read_config,
.write = enp2611_pci_write_config
};
static struct pci_bus * __init enp2611_pci_scan_bus(int nr,
struct pci_sys_data *sys)
{
return pci_scan_root_bus(NULL, sys->busnr, &enp2611_pci_ops, sys,
&sys->resources);
}
static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot,
u8 pin)
{
int irq;
if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 0) {
/* IXP2400. */
irq = IRQ_IXP2000_PCIA;
} else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 1) {
/* 21555 non-transparent bridge. */
irq = IRQ_IXP2000_PCIB;
} else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 4) {
/* PCI2050B transparent bridge. */
irq = -1;
} else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 0) {
/* 82559 ethernet. */
irq = IRQ_IXP2000_PCIA;
} else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 1) {
/* SPI-3 option board. */
irq = IRQ_IXP2000_PCIB;
} else {
printk(KERN_ERR "enp2611_pci_map_irq() called for unknown "
"device PCI:%d:%d:%d\n", dev->bus->number,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
irq = -1;
}
return irq;
}
struct hw_pci enp2611_pci __initdata = {
.nr_controllers = 1,
.setup = enp2611_pci_setup,
.preinit = enp2611_pci_preinit,
.scan = enp2611_pci_scan_bus,
.map_irq = enp2611_pci_map_irq,
};
int __init enp2611_pci_init(void)
{
if (machine_is_enp2611())
pci_common_init(&enp2611_pci);
return 0;
}
subsys_initcall(enp2611_pci_init);
/*************************************************************************
* ENP-2611 Machine Initialization
*************************************************************************/
static struct flash_platform_data enp2611_flash_platform_data = {
.map_name = "cfi_probe",
.width = 1,
};
static struct ixp2000_flash_data enp2611_flash_data = {
.platform_data = &enp2611_flash_platform_data,
.nr_banks = 1
};
static struct resource enp2611_flash_resource = {
.start = 0xc4000000,
.end = 0xc4000000 + 0x00ffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device enp2611_flash = {
.name = "IXP2000-Flash",
.id = 0,
.dev = {
.platform_data = &enp2611_flash_data,
},
.num_resources = 1,
.resource = &enp2611_flash_resource,
};
static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = {
.sda_pin = ENP2611_GPIO_SDA,
.scl_pin = ENP2611_GPIO_SCL,
};
static struct platform_device enp2611_i2c_controller = {
.name = "IXP2000-I2C",
.id = 0,
.dev = {
.platform_data = &enp2611_i2c_gpio_pins
},
.num_resources = 0
};
static struct platform_device *enp2611_devices[] __initdata = {
&enp2611_flash,
&enp2611_i2c_controller
};
static void __init enp2611_init_machine(void)
{
platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices));
ixp2000_uart_init();
}
MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.atag_offset = 0x100,
.map_io = enp2611_map_io,
.init_irq = ixp2000_init_irq,
.timer = &enp2611_timer,
.init_machine = enp2611_init_machine,
.restart = ixp2000_restart,
MACHINE_END
arch/arm/mach-ixp2000/include/mach/debug-macro.S deleted 100644 → 0
View file @ dd775ae2
/* arch/arm/mach-ixp2000/include/mach/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
.macro addruart, rp, rv, tmp
mov \rp, #0x00030000
#ifdef __ARMEB__
orr \rp, \rp, #0x00000003
#endif
orr \rv, \rp, #0xfe000000 @ virtual base
orr \rv, \rv, #0x00f00000
orr \rp, \rp, #0xc0000000 @ Physical base
.endm
#define UART_SHIFT 2
#include <asm/hardware/debug-8250.S>
arch/arm/mach-ixp2000/include/mach/enp2611.h deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/include/mach/enp2611.h
*
* Register and other defines for Radisys ENP-2611
*
* Created 2004 by Lennert Buytenhek from the ixdp2x01 code. The
* original version carries the following notices:
*
* Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
* Maintainer: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright (C) 2002 Intel Corp.
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __ENP2611_H
#define __ENP2611_H
#define ENP2611_CALEB_PHYS_BASE 0xc5000000
#define ENP2611_CALEB_VIRT_BASE 0xfe000000
#define ENP2611_CALEB_SIZE 0x00100000
#define ENP2611_PM3386_0_PHYS_BASE 0xc6000000
#define ENP2611_PM3386_0_VIRT_BASE 0xfe100000
#define ENP2611_PM3386_0_SIZE 0x00100000
#define ENP2611_PM3386_1_PHYS_BASE 0xc6400000
#define ENP2611_PM3386_1_VIRT_BASE 0xfe200000
#define ENP2611_PM3386_1_SIZE 0x00100000
#define ENP2611_GPIO_SCL 7
#define ENP2611_GPIO_SDA 6
#define IRQ_ENP2611_THERMAL IRQ_IXP2000_GPIO4
#define IRQ_ENP2611_OPTION_BOARD IRQ_IXP2000_GPIO3
#define IRQ_ENP2611_CALEB IRQ_IXP2000_GPIO2
#define IRQ_ENP2611_PM3386_1 IRQ_IXP2000_GPIO1
#define IRQ_ENP2611_PM3386_0 IRQ_IXP2000_GPIO0
#endif
arch/arm/mach-ixp2000/include/mach/entry-macro.S deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for IXP2000-based platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <mach/irqs.h>
.macro get_irqnr_preamble, base, tmp
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqnr, #0x0 @clear out irqnr as default
mov \base, #0xfe000000
orr \base, \base, #0x00e00000
orr \base, \base, #0x08
ldr \irqstat, [\base] @ get interrupts
cmp \irqstat, #0
beq 1001f
clz \irqnr, \irqstat
mov \base, #31
subs \irqnr, \base, \irqnr
/*
* We handle PCIA and PCIB here so we don't have an
* extra layer of code just to check these two bits.
*/
cmp \irqnr, #IRQ_IXP2000_PCI
bne 1001f
mov \base, #0xfe000000
orr \base, \base, #0x00c00000
orr \base, \base, #0x00000100
orr \base, \base, #0x00000058
ldr \irqstat, [\base]
mov \tmp, #(1<<26)
tst \irqstat, \tmp
movne \irqnr, #IRQ_IXP2000_PCIA
bne 1001f
mov \tmp, #(1<<27)
tst \irqstat, \tmp
movne \irqnr, #IRQ_IXP2000_PCIB
1001:
.endm
arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/include/mach/gpio.h
*
* Copyright (C) 2002 Intel Corporation.
*
* This program is free software, you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* IXP2000 GPIO in/out, edge/level detection for IRQs:
* IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
* or both Falling-edge and Rising-edge.
* This must be called *before* the corresponding IRQ is registerd.
* Use this instead of directly setting the GPIO registers.
* GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
*/
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H
#ifndef __ASSEMBLY__
#define GPIO_IN 0
#define GPIO_OUT 1
#define IXP2000_GPIO_LOW 0
#define IXP2000_GPIO_HIGH 1
extern void gpio_line_config(int line, int direction);
static inline int gpio_line_get(int line)
{
return (((*IXP2000_GPIO_PLR) >> line) & 1);
}
static inline void gpio_line_set(int line, int value)
{
if (value == IXP2000_GPIO_HIGH) {
ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
} else if (value == IXP2000_GPIO_LOW) {
ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
}
}
#endif /* !__ASSEMBLY__ */
#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
arch/arm/mach-ixp2000/include/mach/hardware.h deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/include/mach/hardware.h
*
* Hardware definitions for IXP2400/2800 based systems
*
* Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
*
* Maintainer: Deepak Saxena <dsaxena@mvista.com>
*
* Copyright (C) 2001-2002 Intel Corp.
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __ASM_ARCH_HARDWARE_H__
#define __ASM_ARCH_HARDWARE_H__
#include "ixp2000-regs.h" /* Chipset Registers */
/*
* Platform helper functions
*/
#include "platform.h"
/*
* Platform-specific bits
*/
#include "enp2611.h" /* ENP-2611 */
#include "ixdp2x00.h" /* IXDP2400/2800 */
#include "ixdp2x01.h" /* IXDP2401/2801 */
#endif /* _ASM_ARCH_HARDWARE_H__ */
arch/arm/mach-ixp2000/include/mach/io.h deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/include/mach/io.h
*
* Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
* Maintainer: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright (C) 2002 Intel Corp.
* Copyrgiht (C) 2003-2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#include <mach/hardware.h>
#define IO_SPACE_LIMIT 0xffffffff
/*
* The A? revisions of the IXP2000s assert byte lanes for PCI I/O
* transactions the other way round (MEM transactions don't have this
* issue), so if we want to support those models, we need to override
* the standard I/O functions.
*
* B0 and later have a bit that can be set to 1 to get the proper
* behavior for I/O transactions, which then allows us to use the
* standard I/O functions. This is what we do if the user does not
* explicitly ask for support for pre-B0.
*/
#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
#define alignb(addr) (void __iomem *)((unsigned long)(addr) ^ 3)
#define alignw(addr) (void __iomem *)((unsigned long)(addr) ^ 2)
#define outb(v,p) __raw_writeb((v),alignb(___io(p)))
#define outw(v,p) __raw_writew((v),alignw(___io(p)))
#define outl(v,p) __raw_writel((v),___io(p))
#define inb(p) ({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; })
#define inw(p) \
({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; })
#define inl(p) \
({ unsigned int __v = (__raw_readl(___io(p))); __v; })
#define outsb(p,d,l) __raw_writesb(alignb(___io(p)),d,l)
#define outsw(p,d,l) __raw_writesw(alignw(___io(p)),d,l)
#define outsl(p,d,l) __raw_writesl(___io(p),d,l)
#define insb(p,d,l) __raw_readsb(alignb(___io(p)),d,l)
#define insw(p,d,l) __raw_readsw(alignw(___io(p)),d,l)
#define insl(p,d,l) __raw_readsl(___io(p),d,l)
#define __is_io_address(p) ((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE)
#define ioread8(p) \
({ \
unsigned int __v; \
\
if (__is_io_address(p)) { \
__v = __raw_readb(alignb(p)); \
} else { \
__v = __raw_readb(p); \
} \
\
__v; \
}) \
#define ioread16(p) \
({ \
unsigned int __v; \
\
if (__is_io_address(p)) { \
__v = __raw_readw(alignw(p)); \
} else { \
__v = le16_to_cpu(__raw_readw(p)); \
} \
\
__v; \
})
#define ioread32(p) \
({ \
unsigned int __v; \
\
if (__is_io_address(p)) { \
__v = __raw_readl(p); \
} else { \
__v = le32_to_cpu(__raw_readl(p)); \
} \
\
__v; \
})
#define iowrite8(v,p) \
({ \
if (__is_io_address(p)) { \
__raw_writeb((v), alignb(p)); \
} else { \
__raw_writeb((v), p); \
} \
})
#define iowrite16(v,p) \
({ \
if (__is_io_address(p)) { \
__raw_writew((v), alignw(p)); \
} else { \
__raw_writew(cpu_to_le16(v), p); \
} \
})
#define iowrite32(v,p) \
({ \
if (__is_io_address(p)) { \
__raw_writel((v), p); \
} else { \
__raw_writel(cpu_to_le32(v), p); \
} \
})
#define ioport_map(port, nr) ___io(port)
#define ioport_unmap(addr)
#else
#define __io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
#endif
#endif
arch/arm/mach-ixp2000/include/mach/irqs.h deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/include/mach/irqs.h
*
* Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
* Maintainer: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright (C) 2002 Intel Corp.
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _IRQS_H
#define _IRQS_H
/*
* Do NOT add #ifdef MACHINE_FOO in here.
* Simpy add your machine IRQs here and increase NR_IRQS if needed to
* hold your machine's IRQ table.
*/
/*
* Some interrupt numbers go unused b/c the IRQ mask/ummask/status
* register has those bit reserved. We just mark those interrupts
* as invalid and this allows us to do mask/unmask with a single
* shift operation instead of having to map the IRQ number to
* a HW IRQ number.
*/
#define IRQ_IXP2000_SOFT_INT 0 /* soft interrupt */
#define IRQ_IXP2000_ERRSUM 1 /* OR of all bits in ErrorStatus reg*/
#define IRQ_IXP2000_UART 2
#define IRQ_IXP2000_GPIO 3
#define IRQ_IXP2000_TIMER1 4
#define IRQ_IXP2000_TIMER2 5
#define IRQ_IXP2000_TIMER3 6
#define IRQ_IXP2000_TIMER4 7
#define IRQ_IXP2000_PMU 8
#define IRQ_IXP2000_SPF 9 /* Slow port framer IRQ */
#define IRQ_IXP2000_DMA1 10
#define IRQ_IXP2000_DMA2 11
#define IRQ_IXP2000_DMA3 12
#define IRQ_IXP2000_PCI_DOORBELL 13
#define IRQ_IXP2000_ME_ATTN 14
#define IRQ_IXP2000_PCI 15 /* PCI INTA or INTB */
#define IRQ_IXP2000_THDA0 16 /* thread 0-31A */
#define IRQ_IXP2000_THDA1 17 /* thread 32-63A, IXP2800 only */
#define IRQ_IXP2000_THDA2 18 /* thread 64-95A */
#define IRQ_IXP2000_THDA3 19 /* thread 96-127A, IXP2800 only */
#define IRQ_IXP2000_THDB0 24 /* thread 0-31B */
#define IRQ_IXP2000_THDB1 25 /* thread 32-63B, IXP2800 only */
#define IRQ_IXP2000_THDB2 26 /* thread 64-95B */
#define IRQ_IXP2000_THDB3 27 /* thread 96-127B, IXP2800 only */
/* define generic GPIOs */
#define IRQ_IXP2000_GPIO0 32
#define IRQ_IXP2000_GPIO1 33
#define IRQ_IXP2000_GPIO2 34
#define IRQ_IXP2000_GPIO3 35
#define IRQ_IXP2000_GPIO4 36
#define IRQ_IXP2000_GPIO5 37
#define IRQ_IXP2000_GPIO6 38
#define IRQ_IXP2000_GPIO7 39
/* split off the 2 PCI sources */
#define IRQ_IXP2000_PCIA 40
#define IRQ_IXP2000_PCIB 41
/* Int sources from IRQ_ERROR_STATUS */
#define IRQ_IXP2000_DRAM0_MIN_ERR 42
#define IRQ_IXP2000_DRAM0_MAJ_ERR 43
#define IRQ_IXP2000_DRAM1_MIN_ERR 44
#define IRQ_IXP2000_DRAM1_MAJ_ERR 45
#define IRQ_IXP2000_DRAM2_MIN_ERR 46
#define IRQ_IXP2000_DRAM2_MAJ_ERR 47
/* 48-57 reserved */
#define IRQ_IXP2000_SRAM0_ERR 58
#define IRQ_IXP2000_SRAM1_ERR 59
#define IRQ_IXP2000_SRAM2_ERR 60
#define IRQ_IXP2000_SRAM3_ERR 61
/* 62-65 reserved */
#define IRQ_IXP2000_MEDIA_ERR 66
#define IRQ_IXP2000_PCI_ERR 67
#define IRQ_IXP2000_SP_INT 68
#define NR_IXP2000_IRQS 69
#define IXP2000_BOARD_IRQ(x) (NR_IXP2000_IRQS + (x))
#define IXP2000_BOARD_IRQ_MASK(irq) (1 << (irq - NR_IXP2000_IRQS))
#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))
#define IXP2000_VALID_ERR_IRQ_MASK (\
IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \
IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \
IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \
IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \
IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \
IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \
IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \
IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \
IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \
IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \
IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \
IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \
IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT) )
/*
* This allows for all the on-chip sources plus up to 32 CPLD based
* IRQs. Should be more than enough.
*/
#define IXP2000_BOARD_IRQS 32
#define NR_IRQS (NR_IXP2000_IRQS + IXP2000_BOARD_IRQS)
/*
* IXDP2400 specific IRQs
*/
#define IRQ_IXDP2400_INGRESS_NPU IXP2000_BOARD_IRQ(0)
#define IRQ_IXDP2400_ENET IXP2000_BOARD_IRQ(1)
#define IRQ_IXDP2400_MEDIA_PCI IXP2000_BOARD_IRQ(2)
#define IRQ_IXDP2400_MEDIA_SP IXP2000_BOARD_IRQ(3)
#define IRQ_IXDP2400_SF_PCI IXP2000_BOARD_IRQ(4)
#define IRQ_IXDP2400_SF_SP IXP2000_BOARD_IRQ(5)
#define IRQ_IXDP2400_PMC IXP2000_BOARD_IRQ(6)
#define IRQ_IXDP2400_TVM IXP2000_BOARD_IRQ(7)
#define NR_IXDP2400_IRQS ((IRQ_IXDP2400_TVM)+1)
#define IXDP2400_NR_IRQS NR_IXDP2400_IRQS - NR_IXP2000_IRQS
/* IXDP2800 specific IRQs */
#define IRQ_IXDP2800_EGRESS_ENET IXP2000_BOARD_IRQ(0)
#define IRQ_IXDP2800_INGRESS_NPU IXP2000_BOARD_IRQ(1)
#define IRQ_IXDP2800_PMC IXP2000_BOARD_IRQ(2)
#define IRQ_IXDP2800_FABRIC_PCI IXP2000_BOARD_IRQ(3)
#define IRQ_IXDP2800_FABRIC IXP2000_BOARD_IRQ(4)
#define IRQ_IXDP2800_MEDIA IXP2000_BOARD_IRQ(5)
#define NR_IXDP2800_IRQS ((IRQ_IXDP2800_MEDIA)+1)
#define IXDP2800_NR_IRQS NR_IXDP2800_IRQS - NR_IXP2000_IRQS
/*
* IRQs on both IXDP2x01 boards
*/
#define IRQ_IXDP2X01_SPCI_DB_0 IXP2000_BOARD_IRQ(2)
#define IRQ_IXDP2X01_SPCI_DB_1 IXP2000_BOARD_IRQ(3)
#define IRQ_IXDP2X01_SPCI_PMC_INTA IXP2000_BOARD_IRQ(4)
#define IRQ_IXDP2X01_SPCI_PMC_INTB IXP2000_BOARD_IRQ(5)
#define IRQ_IXDP2X01_SPCI_PMC_INTC IXP2000_BOARD_IRQ(6)
#define IRQ_IXDP2X01_SPCI_PMC_INTD IXP2000_BOARD_IRQ(7)
#define IRQ_IXDP2X01_SPCI_FIC_INT IXP2000_BOARD_IRQ(8)
#define IRQ_IXDP2X01_IPMI_FROM IXP2000_BOARD_IRQ(16)
#define IRQ_IXDP2X01_125US IXP2000_BOARD_IRQ(17)
#define IRQ_IXDP2X01_DB_0_ADD IXP2000_BOARD_IRQ(18)
#define IRQ_IXDP2X01_DB_1_ADD IXP2000_BOARD_IRQ(19)
#define IRQ_IXDP2X01_UART1 IXP2000_BOARD_IRQ(21)
#define IRQ_IXDP2X01_UART2 IXP2000_BOARD_IRQ(22)
#define IRQ_IXDP2X01_FIC_ADD_INT IXP2000_BOARD_IRQ(24)
#define IRQ_IXDP2X01_CS8900 IXP2000_BOARD_IRQ(25)
#define IRQ_IXDP2X01_BBSRAM IXP2000_BOARD_IRQ(26)
#define IXDP2X01_VALID_IRQ_MASK ( \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) )
/*
* IXDP2401 specific IRQs
*/
#define IRQ_IXDP2401_INTA_82546 IXP2000_BOARD_IRQ(0)
#define IRQ_IXDP2401_INTB_82546 IXP2000_BOARD_IRQ(1)
#define IXDP2401_VALID_IRQ_MASK ( \
IXDP2X01_VALID_IRQ_MASK | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546))
/*
* IXDP2801-specific IRQs
*/
#define IRQ_IXDP2801_RIV IXP2000_BOARD_IRQ(0)
#define IRQ_IXDP2801_CNFG_MEDIA IXP2000_BOARD_IRQ(27)
#define IRQ_IXDP2801_CLOCK_REF IXP2000_BOARD_IRQ(28)
#define IXDP2801_VALID_IRQ_MASK ( \
IXDP2X01_VALID_IRQ_MASK | \
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\
IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF))
#define NR_IXDP2X01_IRQS ((IRQ_IXDP2801_CLOCK_REF) + 1)
#endif /*_IRQS_H*/
arch/arm/mach-ixp2000/include/mach/ixdp2x00.h deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
*
* Register and other defines for IXDP2[48]00 platforms
*
* Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
* Maintainer: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright (C) 2002 Intel Corp.
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _IXDP2X00_H_
#define _IXDP2X00_H_
/*
* On board CPLD memory map
*/
#define IXDP2X00_PHYS_CPLD_BASE 0xc7000000
#define IXDP2X00_VIRT_CPLD_BASE 0xfe000000
#define IXDP2X00_CPLD_SIZE 0x00100000
#define IXDP2X00_CPLD_REG(x) \
(volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x)
/*
* IXDP2400 CPLD registers
*/
#define IXDP2400_CPLD_SYSLED IXDP2X00_CPLD_REG(0x0)
#define IXDP2400_CPLD_DISP_DATA IXDP2X00_CPLD_REG(0x4)
#define IXDP2400_CPLD_CLOCK_SPEED IXDP2X00_CPLD_REG(0x8)
#define IXDP2400_CPLD_INT_STAT IXDP2X00_CPLD_REG(0xc)
#define IXDP2400_CPLD_REV IXDP2X00_CPLD_REG(0x10)
#define IXDP2400_CPLD_SYS_CLK_M IXDP2X00_CPLD_REG(0x14)
#define IXDP2400_CPLD_SYS_CLK_N IXDP2X00_CPLD_REG(0x18)
#define IXDP2400_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x48)
/*
* IXDP2800 CPLD registers
*/
#define IXDP2800_CPLD_INT_STAT IXDP2X00_CPLD_REG(0x0)
#define IXDP2800_CPLD_INT_MASK IXDP2X00_CPLD_REG(0x140)
#define IXDP2X00_GPIO_I2C_ENABLE 0x02
#define IXDP2X00_GPIO_SCL 0x07
#define IXDP2X00_GPIO_SDA 0x06
/*
* PCI devfns for on-board devices. We need these to be able to
* properly translate IRQs and for device removal.
*/
#define IXDP2400_SLAVE_ENET_DEVFN 0x18 /* Bus 1 */
#define IXDP2400_MASTER_ENET_DEVFN 0x20 /* Bus 1 */
#define IXDP2400_MEDIA_DEVFN 0x28 /* Bus 1 */
#define IXDP2400_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */
#define IXDP2800_SLAVE_ENET_DEVFN 0x20 /* Bus 1 */
#define IXDP2800_MASTER_ENET_DEVFN 0x18 /* Bus 1 */
#define IXDP2800_SWITCH_FABRIC_DEVFN 0x30 /* Bus 1 */
#define IXDP2X00_P2P_DEVFN 0x20 /* Bus 0 */
#define IXDP2X00_21555_DEVFN 0x30 /* Bus 0 */
#define IXDP2X00_SLAVE_NPU_DEVFN 0x28 /* Bus 1 */
#define IXDP2X00_PMC_DEVFN 0x38 /* Bus 1 */
#define IXDP2X00_MASTER_NPU_DEVFN 0x38 /* Bus 1 */
#ifndef __ASSEMBLY__
/*
* The master NPU is always PCI master.
*/
static inline unsigned int ixdp2x00_master_npu(void)
{
return !!ixp2000_is_pcimaster();
}
/*
* Helper functions used by ixdp2400 and ixdp2800 specific code
*/
void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long);
void ixdp2x00_slave_pci_postinit(void);
void ixdp2x00_init_machine(void);
void ixdp2x00_map_io(void);
#endif
#endif /*_IXDP2X00_H_ */
arch/arm/mach-ixp2000/include/mach/ixdp2x01.h deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
*
* Platform definitions for IXDP2X01 && IXDP2801 systems
*
* Author: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright 2004 (c) MontaVista Software, Inc.
*
* Based on original code Copyright (c) 2002-2003 Intel Corporation
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __IXDP2X01_H__
#define __IXDP2X01_H__
#define IXDP2X01_PHYS_CPLD_BASE 0xc6024000
#define IXDP2X01_VIRT_CPLD_BASE 0xfe000000
#define IXDP2X01_CPLD_REGION_SIZE 0x00100000
#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg)
#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg)
#define IXDP2X01_UART1_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x40)
#define IXDP2X01_UART1_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x40)
#define IXDP2X01_UART2_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x60)
#define IXDP2X01_UART2_PHYS_BASE IXDP2X01_CPLD_PHYS_REG(0x60)
#define IXDP2X01_CS8900_VIRT_BASE IXDP2X01_CPLD_VIRT_REG(0x80)
#define IXDP2X01_CS8900_VIRT_END (IXDP2X01_CS8900_VIRT_BASE + 16)
#define IXDP2X01_CPLD_RESET_REG IXDP2X01_CPLD_VIRT_REG(0x00)
#define IXDP2X01_INT_MASK_SET_REG IXDP2X01_CPLD_VIRT_REG(0x08)
#define IXDP2X01_INT_STAT_REG IXDP2X01_CPLD_VIRT_REG(0x0C)
#define IXDP2X01_INT_RAW_REG IXDP2X01_CPLD_VIRT_REG(0x10)
#define IXDP2X01_INT_MASK_CLR_REG IXDP2X01_INT_RAW_REG
#define IXDP2X01_INT_SIM_REG IXDP2X01_CPLD_VIRT_REG(0x14)
#define IXDP2X01_CPLD_FLASH_REG IXDP2X01_CPLD_VIRT_REG(0x20)
#define IXDP2X01_CPLD_FLASH_INTERN 0x8000
#define IXDP2X01_CPLD_FLASH_BANK_MASK 0xF
#define IXDP2X01_FLASH_WINDOW_BITS 25
#define IXDP2X01_FLASH_WINDOW_SIZE (1 << IXDP2X01_FLASH_WINDOW_BITS)
#define IXDP2X01_FLASH_WINDOW_MASK (IXDP2X01_FLASH_WINDOW_SIZE - 1)
#define IXDP2X01_UART_CLK 1843200
#define IXDP2X01_GPIO_I2C_ENABLE 0x02
#define IXDP2X01_GPIO_SCL 0x07
#define IXDP2X01_GPIO_SDA 0x06
#endif /* __IXDP2x01_H__ */
arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h deleted 100644 → 0
View file @ dd775ae2
This diff is collapsed.
arch/arm/mach-ixp2000/include/mach/memory.h deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/include/mach/memory.h
*
* Copyright (c) 2002 Intel Corp.
* Copyright (c) 2003-2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x00000000)
#include <mach/ixp2000-regs.h>
#define IXP2000_PCI_SDRAM_OFFSET (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)
#define __phys_to_bus(x) ((x) + (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
#define __bus_to_phys(x) ((x) - (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v))
#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b))
#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p))
#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b))
#endif
arch/arm/mach-ixp2000/include/mach/platform.h deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/include/mach/platform.h
*
* Various bits of code used by platform-level code.
*
* Author: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright 2004 (c) MontaVista Software, Inc.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASSEMBLY__
static inline unsigned long ixp2000_reg_read(volatile void *reg)
{
return *((volatile unsigned long *)reg);
}
static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
{
*((volatile unsigned long *)reg) = val;
}
/*
* On the IXP2400, we can't use XCB=000 due to chip bugs. We use
* XCB=101 instead, but that makes all I/O accesses bufferable. This
* is not a problem in general, but we do have to be slightly more
* careful because I/O writes are no longer automatically flushed out
* of the write buffer.
*
* In cases where we want to make sure that a write has been flushed
* out of the write buffer before we proceed, for example when masking
* a device interrupt before re-enabling IRQs in CPSR, we can use this
* function, ixp2000_reg_wrb, which performs a write, a readback, and
* issues a dummy instruction dependent on the value of the readback
* (mov rX, rX) to make sure that the readback has completed before we
* continue.
*/
static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
{
unsigned long dummy;
*((volatile unsigned long *)reg) = val;
dummy = *((volatile unsigned long *)reg);
__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
}
/*
* Boards may multiplex different devices on the 2nd channel of
* the slowport interface that each need different configuration
* settings. For example, the IXDP2400 uses channel 2 on the interface
* to access the CPLD, the switch fabric card, and the media card. Each
* one needs a different mode so drivers must save/restore the mode
* before and after each operation.
*
* acquire_slowport(&your_config);
* ...
* do slowport operations
* ...
* release_slowport();
*
* Note that while you have the slowport, you are holding a spinlock,
* so your code should be written as if you explicitly acquired a lock.
*
* The configuration only affects device 2 on the slowport, so the
* MTD map driver does not acquire/release the slowport.
*/
struct slowport_cfg {
unsigned long CCR; /* Clock divide */
unsigned long WTC; /* Write Timing Control */
unsigned long RTC; /* Read Timing Control */
unsigned long PCR; /* Protocol Control Register */
unsigned long ADC; /* Address/Data Width Control */
};
void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *);
void ixp2000_release_slowport(struct slowport_cfg *);
/*
* IXP2400 A0/A1 and IXP2800 A0/A1/A2 have broken slowport that requires
* tweaking of addresses in the MTD driver.
*/
static inline unsigned ixp2000_has_broken_slowport(void)
{
unsigned long id = *IXP2000_PRODUCT_ID;
unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK |
IXP2000_MIN_PROD_TYPE_MASK);
return (((id_prod ==
/* fixed in IXP2400-B0 */
(IXP2000_MAJ_PROD_TYPE_IXP2000 |
IXP2000_MIN_PROD_TYPE_IXP2400)) &&
((id & IXP2000_MAJ_REV_MASK) == 0)) ||
((id_prod ==
/* fixed in IXP2800-B0 */
(IXP2000_MAJ_PROD_TYPE_IXP2000 |
IXP2000_MIN_PROD_TYPE_IXP2800)) &&
((id & IXP2000_MAJ_REV_MASK) == 0)) ||
((id_prod ==
/* fixed in IXP2850-B0 */
(IXP2000_MAJ_PROD_TYPE_IXP2000 |
IXP2000_MIN_PROD_TYPE_IXP2850)) &&
((id & IXP2000_MAJ_REV_MASK) == 0)));
}
static inline unsigned int ixp2000_has_flash(void)
{
return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM));
}
static inline unsigned int ixp2000_is_pcimaster(void)
{
return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST));
}
void ixp2000_map_io(void);
void ixp2000_uart_init(void);
void ixp2000_init_irq(void);
void ixp2000_init_time(unsigned long);
void ixp2000_restart(char, const char *);
unsigned long ixp2000_gettimeoffset(void);
struct pci_sys_data;
u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where);
void ixp2000_pci_preinit(void);
int ixp2000_pci_setup(int, struct pci_sys_data*);
struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*);
int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *);
int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32);
/*
* Several of the IXP2000 systems have banked flash so we need to extend the
* flash_platform_data structure with some private pointers
*/
struct ixp2000_flash_data {
struct flash_platform_data *platform_data;
int nr_banks;
unsigned long (*bank_setup)(unsigned long);
};
struct ixp2000_i2c_pins {
unsigned long sda_pin;
unsigned long scl_pin;
};
#endif /* !__ASSEMBLY__ */
arch/arm/mach-ixp2000/include/mach/timex.h deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/include/mach/timex.h
*
* IXP2000 architecture timex specifications
*/
/*
* Default clock is 50MHz APB, but platform code can override this
*/
#define CLOCK_TICK_RATE 50000000
arch/arm/mach-ixp2000/include/mach/uncompress.h deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/include/mach/uncompress.h
*
*
* Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
* Maintainer: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright 2002 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/serial_reg.h>
#define UART_BASE 0xc0030000
#define PHYS(x) ((volatile unsigned long *)(UART_BASE + x))
#define UARTDR PHYS(0x00) /* Transmit reg dlab=0 */
#define UARTDLL PHYS(0x00) /* Divisor Latch reg dlab=1*/
#define UARTDLM PHYS(0x04) /* Divisor Latch reg dlab=1*/
#define UARTIER PHYS(0x04) /* Interrupt enable reg */
#define UARTFCR PHYS(0x08) /* FIFO control reg dlab =0*/
#define UARTLCR PHYS(0x0c) /* Control reg */
#define UARTSR PHYS(0x14) /* Status reg */
static inline void putc(int c)
{
int j = 0x1000;
while (--j && !(*UARTSR & UART_LSR_THRE))
barrier();
*UARTDR = c;
}
static inline void flush(void)
{
}
#define arch_decomp_setup()
#define arch_decomp_wdog()
arch/arm/mach-ixp2000/ixdp2400.c deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/ixdp2400.c
*
* IXDP2400 platform support
*
* Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
* Maintainer: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright (C) 2002 Intel Corp.
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/pci.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/flash.h>
#include <asm/mach/arch.h>
/*************************************************************************
* IXDP2400 timer tick
*************************************************************************/
static void __init ixdp2400_timer_init(void)
{
int numerator, denominator;
int denom_array[] = {2, 4, 8, 16, 1, 2, 4, 8};
numerator = (*(IXDP2400_CPLD_SYS_CLK_M) & 0xFF) *2;
denominator = denom_array[(*(IXDP2400_CPLD_SYS_CLK_N) & 0x7)];
ixp2000_init_time(((3125000 * numerator) / (denominator)) / 2);
}
static struct sys_timer ixdp2400_timer = {
.init = ixdp2400_timer_init,
.offset = ixp2000_gettimeoffset,
};
/*************************************************************************
* IXDP2400 PCI
*************************************************************************/
void __init ixdp2400_pci_preinit(void)
{
ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
ixp2000_pci_preinit();
pcibios_setup("firmware");
}
int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys)
{
sys->mem_offset = 0xe0000000;
ixp2000_pci_setup(nr, sys);
return 1;
}
static int __init ixdp2400_pci_map_irq(const struct pci_dev *dev, u8 slot,
u8 pin)
{
if (ixdp2x00_master_npu()) {
/*
* Root bus devices. Slave NPU is only one with interrupt.
* Everything else, we just return -1 b/c nothing else
* on the root bus has interrupts.
*/
if(!dev->bus->self) {
if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
return IRQ_IXDP2400_INGRESS_NPU;
return -1;
}
/*
* Bridge behind the PMC slot.
* NOTE: Only INTA from the PMC slot is routed. VERY BAD.
*/
if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
!dev->bus->parent->self->bus->parent)
return IRQ_IXDP2400_PMC;
/*
* Device behind the first bridge
*/
if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
switch(dev->devfn) {
case IXDP2400_MASTER_ENET_DEVFN:
return IRQ_IXDP2400_ENET;
case IXDP2400_MEDIA_DEVFN:
return IRQ_IXDP2400_MEDIA_PCI;
case IXDP2400_SWITCH_FABRIC_DEVFN:
return IRQ_IXDP2400_SF_PCI;
case IXDP2X00_PMC_DEVFN:
return IRQ_IXDP2400_PMC;
}
}
return -1;
} else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
}
static void ixdp2400_pci_postinit(void)
{
struct pci_dev *dev;
if (ixdp2x00_master_npu()) {
dev = pci_get_bus_and_slot(1, IXDP2400_SLAVE_ENET_DEVFN);
pci_stop_and_remove_bus_device(dev);
pci_dev_put(dev);
} else {
dev = pci_get_bus_and_slot(1, IXDP2400_MASTER_ENET_DEVFN);
pci_stop_and_remove_bus_device(dev);
pci_dev_put(dev);
ixdp2x00_slave_pci_postinit();
}
}
static struct hw_pci ixdp2400_pci __initdata = {
.nr_controllers = 1,
.setup = ixdp2400_pci_setup,
.preinit = ixdp2400_pci_preinit,
.postinit = ixdp2400_pci_postinit,
.scan = ixp2000_pci_scan_bus,
.map_irq = ixdp2400_pci_map_irq,
};
int __init ixdp2400_pci_init(void)
{
if (machine_is_ixdp2400())
pci_common_init(&ixdp2400_pci);
return 0;
}
subsys_initcall(ixdp2400_pci_init);
void __init ixdp2400_init_irq(void)
{
ixdp2x00_init_irq(IXDP2400_CPLD_INT_STAT, IXDP2400_CPLD_INT_MASK, IXDP2400_NR_IRQS);
}
MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
.atag_offset = 0x100,
.map_io = ixdp2x00_map_io,
.init_irq = ixdp2400_init_irq,
.timer = &ixdp2400_timer,
.init_machine = ixdp2x00_init_machine,
.restart = ixp2000_restart,
MACHINE_END
arch/arm/mach-ixp2000/ixdp2800.c deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/ixdp2800.c
*
* IXDP2800 platform support
*
* Original Author: Jeffrey Daly <jeffrey.daly@intel.com>
* Maintainer: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright (C) 2002 Intel Corp.
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/pci.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/flash.h>
#include <asm/mach/arch.h>
/*************************************************************************
* IXDP2800 timer tick
*************************************************************************/
static void __init ixdp2800_timer_init(void)
{
ixp2000_init_time(50000000);
}
static struct sys_timer ixdp2800_timer = {
.init = ixdp2800_timer_init,
.offset = ixp2000_gettimeoffset,
};
/*************************************************************************
* IXDP2800 PCI
*************************************************************************/
static void __init ixdp2800_slave_disable_pci_master(void)
{
*IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
}
static void __init ixdp2800_master_wait_for_slave(void)
{
volatile u32 *addr;
printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure "
"its BAR sizes\n");
addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
PCI_BASE_ADDRESS_1);
do {
*addr = 0xffffffff;
cpu_relax();
} while (*addr != 0xfe000008);
addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN,
PCI_BASE_ADDRESS_2);
do {
*addr = 0xffffffff;
cpu_relax();
} while (*addr != 0xc0000008);
/*
* Configure the slave's SDRAM BAR by hand.
*/
*addr = 0x40000008;
}
static void __init ixdp2800_slave_wait_for_master_enable(void)
{
printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n");
while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0)
cpu_relax();
}
void __init ixdp2800_pci_preinit(void)
{
printk("ixdp2x00_pci_preinit called\n");
*IXP2000_PCI_ADDR_EXT = 0x0001e000;
if (!ixdp2x00_master_npu())
ixdp2800_slave_disable_pci_master();
*IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff;
*IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff;
ixp2000_pci_preinit();
if (ixdp2x00_master_npu()) {
/*
* Wait until the slave set its SRAM/SDRAM BAR sizes
* correctly before we proceed to scan and enumerate
* the bus.
*/
ixdp2800_master_wait_for_slave();
/*
* We configure the SDRAM BARs by hand because they
* are 1G and fall outside of the regular allocated
* PCI address space.
*/
*IXP2000_PCI_SDRAM_BAR = 0x00000008;
} else {
/*
* Wait for the master to complete scanning the bus
* and assigning resources before we proceed to scan
* the bus ourselves. Set pci=firmware to honor the
* master's resource assignment.
*/
ixdp2800_slave_wait_for_master_enable();
pcibios_setup("firmware");
}
}
/*
* We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside
* of the regular PCI window, because there's only 512M of outbound PCI
* memory window on each IXP, while we need 1G for each of the BARs.
*/
static void __devinit ixp2800_pci_fixup(struct pci_dev *dev)
{
if (machine_is_ixdp2800()) {
dev->resource[2].start = 0;
dev->resource[2].end = 0;
dev->resource[2].flags = 0;
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup);
static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys)
{
sys->mem_offset = 0x00000000;
ixp2000_pci_setup(nr, sys);
return 1;
}
static int __init ixdp2800_pci_map_irq(const struct pci_dev *dev, u8 slot,
u8 pin)
{
if (ixdp2x00_master_npu()) {
/*
* Root bus devices. Slave NPU is only one with interrupt.
* Everything else, we just return -1 which is invalid.
*/
if(!dev->bus->self) {
if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN )
return IRQ_IXDP2800_INGRESS_NPU;
return -1;
}
/*
* Bridge behind the PMC slot.
*/
if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN &&
dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN &&
!dev->bus->parent->self->bus->parent)
return IRQ_IXDP2800_PMC;
/*
* Device behind the first bridge
*/
if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) {
switch(dev->devfn) {
case IXDP2X00_PMC_DEVFN:
return IRQ_IXDP2800_PMC;
case IXDP2800_MASTER_ENET_DEVFN:
return IRQ_IXDP2800_EGRESS_ENET;
case IXDP2800_SWITCH_FABRIC_DEVFN:
return IRQ_IXDP2800_FABRIC;
}
}
return -1;
} else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */
}
static void __init ixdp2800_master_enable_slave(void)
{
volatile u32 *addr;
printk(KERN_INFO "IXDP2800: enabling slave NPU\n");
addr = (volatile u32 *)ixp2000_pci_config_addr(0,
IXDP2X00_SLAVE_NPU_DEVFN,
PCI_COMMAND);
*addr |= PCI_COMMAND_MASTER;
}
static void __init ixdp2800_master_wait_for_slave_bus_scan(void)
{
volatile u32 *addr;
printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n");
addr = (volatile u32 *)ixp2000_pci_config_addr(0,
IXDP2X00_SLAVE_NPU_DEVFN,
PCI_COMMAND);
while ((*addr & PCI_COMMAND_MEMORY) == 0)
cpu_relax();
}
static void __init ixdp2800_slave_signal_bus_scan_completion(void)
{
printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n");
*IXP2000_PCI_CMDSTAT |= PCI_COMMAND_MEMORY;
}
static void __init ixdp2800_pci_postinit(void)
{
if (!ixdp2x00_master_npu()) {
ixdp2x00_slave_pci_postinit();
ixdp2800_slave_signal_bus_scan_completion();
}
}
struct __initdata hw_pci ixdp2800_pci __initdata = {
.nr_controllers = 1,
.setup = ixdp2800_pci_setup,
.preinit = ixdp2800_pci_preinit,
.postinit = ixdp2800_pci_postinit,
.scan = ixp2000_pci_scan_bus,
.map_irq = ixdp2800_pci_map_irq,
};
int __init ixdp2800_pci_init(void)
{
if (machine_is_ixdp2800()) {
struct pci_dev *dev;
pci_common_init(&ixdp2800_pci);
if (ixdp2x00_master_npu()) {
dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN);
pci_stop_and_remove_bus_device(dev);
pci_dev_put(dev);
ixdp2800_master_enable_slave();
ixdp2800_master_wait_for_slave_bus_scan();
} else {
dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN);
pci_stop_and_remove_bus_device(dev);
pci_dev_put(dev);
}
}
return 0;
}
subsys_initcall(ixdp2800_pci_init);
void __init ixdp2800_init_irq(void)
{
ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS);
}
MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
.atag_offset = 0x100,
.map_io = ixdp2x00_map_io,
.init_irq = ixdp2800_init_irq,
.timer = &ixdp2800_timer,
.init_machine = ixdp2x00_init_machine,
.restart = ixp2000_restart,
MACHINE_END
arch/arm/mach-ixp2000/ixdp2x00.c deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/ixdp2x00.c
*
* Code common to IXDP2400 and IXDP2800 platforms.
*
* Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
* Maintainer: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright (C) 2002 Intel Corp.
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/bitops.h>
#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/pci.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/flash.h>
#include <asm/mach/arch.h>
#include <mach/gpio-ixp2000.h>
/*************************************************************************
* IXDP2x00 IRQ Initialization
*************************************************************************/
static volatile unsigned long *board_irq_mask;
static volatile unsigned long *board_irq_stat;
static unsigned long board_irq_count;
#ifdef CONFIG_ARCH_IXDP2400
/*
* Slowport configuration for accessing CPLD registers on IXDP2x00
*/
static struct slowport_cfg slowport_cpld_cfg = {
.CCR = SLOWPORT_CCR_DIV_2,
.WTC = 0x00000070,
.RTC = 0x00000070,
.PCR = SLOWPORT_MODE_FLASH,
.ADC = SLOWPORT_ADDR_WIDTH_24 | SLOWPORT_DATA_WIDTH_8
};
#endif
static void ixdp2x00_irq_mask(struct irq_data *d)
{
unsigned long dummy;
static struct slowport_cfg old_cfg;
/*
* This is ugly in common code but really don't know
* of a better way to handle it. :(
*/
#ifdef CONFIG_ARCH_IXDP2400
if (machine_is_ixdp2400())
ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg);
#endif
dummy = *board_irq_mask;
dummy |= IXP2000_BOARD_IRQ_MASK(d->irq);
ixp2000_reg_wrb(board_irq_mask, dummy);
#ifdef CONFIG_ARCH_IXDP2400
if (machine_is_ixdp2400())
ixp2000_release_slowport(&old_cfg);
#endif
}
static void ixdp2x00_irq_unmask(struct irq_data *d)
{
unsigned long dummy;
static struct slowport_cfg old_cfg;
#ifdef CONFIG_ARCH_IXDP2400
if (machine_is_ixdp2400())
ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg);
#endif
dummy = *board_irq_mask;
dummy &= ~IXP2000_BOARD_IRQ_MASK(d->irq);
ixp2000_reg_wrb(board_irq_mask, dummy);
if (machine_is_ixdp2400())
ixp2000_release_slowport(&old_cfg);
}
static void ixdp2x00_irq_handler(unsigned int irq, struct irq_desc *desc)
{
volatile u32 ex_interrupt = 0;
static struct slowport_cfg old_cfg;
int i;
desc->irq_data.chip->irq_mask(&desc->irq_data);
#ifdef CONFIG_ARCH_IXDP2400
if (machine_is_ixdp2400())
ixp2000_acquire_slowport(&slowport_cpld_cfg, &old_cfg);
#endif
ex_interrupt = *board_irq_stat & 0xff;
if (machine_is_ixdp2400())
ixp2000_release_slowport(&old_cfg);
if(!ex_interrupt) {
printk(KERN_ERR "Spurious IXDP2x00 CPLD interrupt!\n");
return;
}
for(i = 0; i < board_irq_count; i++) {
if(ex_interrupt & (1 << i)) {
int cpld_irq = IXP2000_BOARD_IRQ(0) + i;
generic_handle_irq(cpld_irq);
}
}
desc->irq_data.chip->irq_unmask(&desc->irq_data);
}
static struct irq_chip ixdp2x00_cpld_irq_chip = {
.irq_ack = ixdp2x00_irq_mask,
.irq_mask = ixdp2x00_irq_mask,
.irq_unmask = ixdp2x00_irq_unmask
};
void __init ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long *mask_reg, unsigned long nr_of_irqs)
{
unsigned int irq;
ixp2000_init_irq();
if (!ixdp2x00_master_npu())
return;
board_irq_stat = stat_reg;
board_irq_mask = mask_reg;
board_irq_count = nr_of_irqs;
*board_irq_mask = 0xffffffff;
for(irq = IXP2000_BOARD_IRQ(0); irq < IXP2000_BOARD_IRQ(board_irq_count); irq++) {
irq_set_chip_and_handler(irq, &ixdp2x00_cpld_irq_chip,
handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
/* Hook into PCI interrupt */
irq_set_chained_handler(IRQ_IXP2000_PCIB, ixdp2x00_irq_handler);
}
/*************************************************************************
* IXDP2x00 memory map
*************************************************************************/
static struct map_desc ixdp2x00_io_desc __initdata = {
.virtual = IXDP2X00_VIRT_CPLD_BASE,
.pfn = __phys_to_pfn(IXDP2X00_PHYS_CPLD_BASE),
.length = IXDP2X00_CPLD_SIZE,
.type = MT_DEVICE
};
void __init ixdp2x00_map_io(void)
{
ixp2000_map_io();
iotable_init(&ixdp2x00_io_desc, 1);
}
/*************************************************************************
* IXDP2x00-common PCI init
*
* The IXDP2[48]00 has a horrid PCI bus layout. Basically the board
* contains two NPUs (ingress and egress) connected over PCI, both running
* instances of the kernel. So far so good. Peers on the PCI bus running
* Linux is a common design in telecom systems. The problem is that instead
* of all the devices being controlled by a single host, different
* devices are controlled by different NPUs on the same bus, leading to
* multiple hosts on the bus. The exact bus layout looks like:
*
* Bus 0
* Master NPU <-------------------+-------------------> Slave NPU
* |
* |
* P2P
* |
*
* Bus 1 |
* <--+------+---------+---------+------+-->
* | | | | |
* | | | | |
* ... Dev PMC Media Eth0 Eth1 ...
*
* The master controls all but Eth1, which is controlled by the
* slave. What this means is that the both the master and the slave
* have to scan the bus, but only one of them can enumerate the bus.
* In addition, after the bus is scanned, each kernel must remove
* the device(s) it does not control from the PCI dev list otherwise
* a driver on each NPU will try to manage it and we will have horrible
* conflicts. Oh..and the slave NPU needs to see the master NPU
* for Intel's drivers to work properly. Closed source drivers...
*
* The way we deal with this is fairly simple but ugly:
*
* 1) Let master scan and enumerate the bus completely.
* 2) Master deletes Eth1 from device list.
* 3) Slave scans bus and then deletes all but Eth1 (Eth0 on slave)
* from device list.
* 4) Find HW designers and LART them.
*
* The boards also do not do normal PCI IRQ routing, or any sort of
* sensical swizzling, so we just need to check where on the bus a
* device sits and figure out to which CPLD pin the interrupt is routed.
* See ixdp2[48]00.c files.
*
*************************************************************************/
void ixdp2x00_slave_pci_postinit(void)
{
struct pci_dev *dev;
/*
* Remove PMC device is there is one
*/
if((dev = pci_get_bus_and_slot(1, IXDP2X00_PMC_DEVFN))) {
pci_stop_and_remove_bus_device(dev);
pci_dev_put(dev);
}
dev = pci_get_bus_and_slot(0, IXDP2X00_21555_DEVFN);
pci_stop_and_remove_bus_device(dev);
pci_dev_put(dev);
}
/**************************************************************************
* IXDP2x00 Machine Setup
*************************************************************************/
static struct flash_platform_data ixdp2x00_platform_data = {
.map_name = "cfi_probe",
.width = 1,
};
static struct ixp2000_flash_data ixdp2x00_flash_data = {
.platform_data = &ixdp2x00_platform_data,
.nr_banks = 1
};
static struct resource ixdp2x00_flash_resource = {
.start = 0xc4000000,
.end = 0xc4000000 + 0x00ffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device ixdp2x00_flash = {
.name = "IXP2000-Flash",
.id = 0,
.dev = {
.platform_data = &ixdp2x00_flash_data,
},
.num_resources = 1,
.resource = &ixdp2x00_flash_resource,
};
static struct ixp2000_i2c_pins ixdp2x00_i2c_gpio_pins = {
.sda_pin = IXDP2X00_GPIO_SDA,
.scl_pin = IXDP2X00_GPIO_SCL,
};
static struct platform_device ixdp2x00_i2c_controller = {
.name = "IXP2000-I2C",
.id = 0,
.dev = {
.platform_data = &ixdp2x00_i2c_gpio_pins,
},
.num_resources = 0
};
static struct platform_device *ixdp2x00_devices[] __initdata = {
&ixdp2x00_flash,
&ixdp2x00_i2c_controller
};
void __init ixdp2x00_init_machine(void)
{
gpio_line_set(IXDP2X00_GPIO_I2C_ENABLE, 1);
gpio_line_config(IXDP2X00_GPIO_I2C_ENABLE, GPIO_OUT);
platform_add_devices(ixdp2x00_devices, ARRAY_SIZE(ixdp2x00_devices));
ixp2000_uart_init();
}
arch/arm/mach-ixp2000/ixdp2x01.c deleted 100644 → 0
View file @ dd775ae2
This diff is collapsed.
arch/arm/mach-ixp2000/pci.c deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp2000/pci.c
*
* PCI routines for IXDP2400/IXDP2800 boards
*
* Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
* Maintained by: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright 2002 Intel Corp.
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <asm/mach/pci.h>
static volatile int pci_master_aborts = 0;
static int clear_master_aborts(void);
u32 *
ixp2000_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
{
u32 *paddress;
if (PCI_SLOT(devfn) > 7)
return 0;
/* Must be dword aligned */
where &= ~3;
/*
* For top bus, generate type 0, else type 1
*/
if (!bus_nr) {
/* only bits[23:16] are used for IDSEL */
paddress = (u32 *) (IXP2000_PCI_CFG0_VIRT_BASE
| (1 << (PCI_SLOT(devfn) + 16))
| (PCI_FUNC(devfn) << 8) | where);
} else {
paddress = (u32 *) (IXP2000_PCI_CFG1_VIRT_BASE
| (bus_nr << 16)
| (PCI_SLOT(devfn) << 11)
| (PCI_FUNC(devfn) << 8) | where);
}
return paddress;
}
/*
* Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
* 0 and 3 are not valid indexes...
*/
static u32 bytemask[] = {
/*0*/ 0,
/*1*/ 0xff,
/*2*/ 0xffff,
/*3*/ 0,
/*4*/ 0xffffffff,
};
int ixp2000_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *value)
{
u32 n;
u32 *addr;
n = where % 4;
addr = ixp2000_pci_config_addr(bus->number, devfn, where);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
pci_master_aborts = 0;
*value = (*addr >> (8*n)) & bytemask[size];
if (pci_master_aborts) {
pci_master_aborts = 0;
*value = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
return PCIBIOS_SUCCESSFUL;
}
/*
* We don't do error checks by calling clear_master_aborts() b/c the
* assumption is that the caller did a read first to make sure a device
* exists.
*/
int ixp2000_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 value)
{
u32 mask;
u32 *addr;
u32 temp;
mask = ~(bytemask[size] << ((where % 0x4) * 8));
addr = ixp2000_pci_config_addr(bus->number, devfn, where);
if (!addr)
return PCIBIOS_DEVICE_NOT_FOUND;
temp = (u32) (value) << ((where % 0x4) * 8);
*addr = (*addr & mask) | temp;
clear_master_aborts();
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops ixp2000_pci_ops = {
.read = ixp2000_pci_read_config,
.write = ixp2000_pci_write_config
};
struct pci_bus *ixp2000_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
{
return pci_scan_root_bus(NULL, sysdata->busnr, &ixp2000_pci_ops,
sysdata, &sysdata->resources);
}
int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
volatile u32 temp;
unsigned long flags;
pci_master_aborts = 1;
local_irq_save(flags);
temp = *(IXP2000_PCI_CONTROL);
if (temp & ((1 << 8) | (1 << 5))) {
ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
}
temp = *(IXP2000_PCI_CMDSTAT);
if (temp & (1 << 29)) {
while (temp & (1 << 29)) {
ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp);
temp = *(IXP2000_PCI_CMDSTAT);
}
}
local_irq_restore(flags);
/*
* If it was an imprecise abort, then we need to correct the
* return address to be _after_ the instruction.
*/
if (fsr & (1 << 10))
regs->ARM_pc += 4;
return 0;
}
int
clear_master_aborts(void)
{
volatile u32 temp;
unsigned long flags;
local_irq_save(flags);
temp = *(IXP2000_PCI_CONTROL);
if (temp & ((1 << 8) | (1 << 5))) {
ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
}
temp = *(IXP2000_PCI_CMDSTAT);
if (temp & (1 << 29)) {
while (temp & (1 << 29)) {
ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp);
temp = *(IXP2000_PCI_CMDSTAT);
}
}
local_irq_restore(flags);
return 0;
}
void __init
ixp2000_pci_preinit(void)
{
pci_set_flags(0);
pcibios_min_io = 0;
pcibios_min_mem = 0;
#ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
/*
* Configure the PCI unit to properly byteswap I/O transactions,
* and verify that it worked.
*/
ixp2000_reg_write(IXP2000_PCI_CONTROL,
(*IXP2000_PCI_CONTROL | PCI_CONTROL_IEE));
if ((*IXP2000_PCI_CONTROL & PCI_CONTROL_IEE) == 0)
panic("IXP2000: PCI I/O is broken on this ixp model, and "
"the needed workaround has not been configured in");
#endif
hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, 0,
"PCI config cycle to non-existent device");
}
/*
* IXP2000 systems often have large resource requirements, so we just
* use our own resource space.
*/
static struct resource ixp2000_pci_mem_space = {
.start = 0xe0000000,
.end = 0xffffffff,
.flags = IORESOURCE_MEM,
.name = "PCI Mem Space"
};
static struct resource ixp2000_pci_io_space = {
.start = 0x00010000,
.end = 0x0001ffff,
.flags = IORESOURCE_IO,
.name = "PCI I/O Space"
};
int ixp2000_pci_setup(int nr, struct pci_sys_data *sys)
{
if (nr >= 1)
return 0;
pci_add_resource_offset(&sys->resources,
&ixp2000_pci_io_space, sys->io_offset);
pci_add_resource_offset(&sys->resources,
&ixp2000_pci_mem_space, sys->mem_offset);
return 1;
}
arch/arm/mach-ixp23xx/Kconfig deleted 100644 → 0
View file @ dd775ae2
if ARCH_IXP23XX
config ARCH_SUPPORTS_BIG_ENDIAN
bool
default y
menu "Intel IXP23xx Implementation Options"
comment "IXP23xx Platforms"
config MACH_ESPRESSO
bool "Support IP Fabrics Double Espresso platform"
help
config MACH_IXDP2351
bool "Support Intel IXDP2351 platform"
help
config MACH_ROADRUNNER
bool "Support ADI RoadRunner platform"
help
endmenu
endif
arch/arm/mach-ixp23xx/Makefile deleted 100644 → 0
View file @ dd775ae2
#
# Makefile for the linux kernel.
#
obj-y := core.o pci.o
obj-m :=
obj-n :=
obj- :=
obj-$(CONFIG_MACH_ESPRESSO) += espresso.o
obj-$(CONFIG_MACH_IXDP2351) += ixdp2351.o
obj-$(CONFIG_MACH_ROADRUNNER) += roadrunner.o
arch/arm/mach-ixp23xx/Makefile.boot deleted 100644 → 0
View file @ dd775ae2
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
arch/arm/mach-ixp23xx/core.c deleted 100644 → 0
View file @ dd775ae2
This diff is collapsed.
arch/arm/mach-ixp23xx/espresso.c deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp23xx/espresso.c
*
* Double Espresso-specific routines
*
* Author: Lennert Buytenhek <buytenh@wantstofly.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/bitops.h>
#include <linux/ioport.h>
#include <linux/serial_8250.h>
#include <linux/serial_core.h>
#include <linux/device.h>
#include <linux/mm.h>
#include <linux/pci.h>
#include <linux/mtd/physmap.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/tlbflush.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
static int __init espresso_pci_init(void)
{
if (machine_is_espresso())
ixp23xx_pci_slave_init();
return 0;
};
subsys_initcall(espresso_pci_init);
static struct physmap_flash_data espresso_flash_data = {
.width = 2,
};
static struct resource espresso_flash_resource = {
.start = 0x90000000,
.end = 0x91ffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device espresso_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &espresso_flash_data,
},
.num_resources = 1,
.resource = &espresso_flash_resource,
};
static void __init espresso_init(void)
{
platform_device_register(&espresso_flash);
/*
* Mark flash as writeable.
*/
IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE;
IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE;
ixp23xx_sys_init();
}
MACHINE_START(ESPRESSO, "IP Fabrics Double Espresso")
/* Maintainer: Lennert Buytenhek */
.map_io = ixp23xx_map_io,
.init_irq = ixp23xx_init_irq,
.timer = &ixp23xx_timer,
.atag_offset = 0x100,
.init_machine = espresso_init,
.restart = ixp23xx_restart,
MACHINE_END
arch/arm/mach-ixp23xx/include/mach/debug-macro.S deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp23xx/include/mach/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <mach/ixp23xx.h>
.macro addruart, rp, rv, tmp
ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical
ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual
#ifdef __ARMEB__
orr \rp, \rp, #0x00000003
orr \rv, \rv, #0x00000003
#endif
.endm
#define UART_SHIFT 2
#include <asm/hardware/debug-8250.S>
arch/arm/mach-ixp23xx/include/mach/entry-macro.S deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp23xx/include/mach/entry-macro.S
*/
.macro get_irqnr_preamble, base, tmp
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
ldr \irqnr, [\irqnr] @ get interrupt number
cmp \irqnr, #0x0 @ spurious interrupt ?
movne \irqnr, \irqnr, lsr #2 @ skip unwanted low order bits
subne \irqnr, \irqnr, #1 @ convert to 0 based
#if 0
cmp \irqnr, #IRQ_IXP23XX_PCI_INT_RPH
bne 1001f
mov \irqnr, #IRQ_IXP23XX_INTA
ldr \irqnr, =0xf5000030
mov \tmp, #(1<<26)
tst \irqnr, \tmp
movne \irqnr, #IRQ_IXP23XX_INTB
mov \tmp, #(1<<27)
tst \irqnr, \tmp
movne \irqnr, #IRQ_IXP23XX_INTA
1001:
#endif
.endm
arch/arm/mach-ixp23xx/include/mach/hardware.h deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp23xx/include/mach/hardware.h
*
* Copyright (C) 2002-2004 Intel Corporation.
* Copyricht (C) 2005 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Hardware definitions for IXP23XX based systems
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
/* PCI IO info */
#include "ixp23xx.h"
/*
* Platform helper functions
*/
#include "platform.h"
/*
* Platform-specific headers
*/
#include "ixdp2351.h"
#endif
arch/arm/mach-ixp23xx/include/mach/io.h deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp23xx/include/mach/io.h
*
* Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
* Maintainer: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright (C) 2003-2005 Intel Corp.
* Copyright (C) 2005 MontaVista Software, Inc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xffffffff
#define __io(p) ((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
#endif
arch/arm/mach-ixp23xx/include/mach/irqs.h deleted 100644 → 0
View file @ dd775ae2
This diff is collapsed.
arch/arm/mach-ixp23xx/include/mach/ixdp2351.h deleted 100644 → 0
View file @ dd775ae2
This diff is collapsed.
arch/arm/mach-ixp23xx/include/mach/ixp23xx.h deleted 100644 → 0
View file @ dd775ae2
This diff is collapsed.
arch/arm/mach-ixp23xx/include/mach/memory.h deleted 100644 → 0
View file @ dd775ae2
This diff is collapsed.
arch/arm/mach-ixp23xx/include/mach/platform.h deleted 100644 → 0
View file @ dd775ae2
This diff is collapsed.
arch/arm/mach-ixp23xx/include/mach/time.h deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp23xx/include/mach/time.h
*/
arch/arm/mach-ixp23xx/include/mach/timex.h deleted 100644 → 0
View file @ dd775ae2
/*
* arch/arm/mach-ixp23xx/include/mach/timex.h
*
* XScale architecture timex specifications
*/
#define CLOCK_TICK_RATE 75000000
arch/arm/mach-ixp23xx/include/mach/uncompress.h deleted 100644 → 0
View file @ dd775ae2
This diff is collapsed.
arch/arm/mach-ixp23xx/ixdp2351.c deleted 100644 → 0
View file @ dd775ae2
This diff is collapsed.
arch/arm/mach-ixp23xx/pci.c deleted 100644 → 0
View file @ dd775ae2
This diff is collapsed.
arch/arm/mach-ixp23xx/roadrunner.c deleted 100644 → 0
View file @ dd775ae2
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7