Commit c6606290 authored by Marko Kohtala's avatar Marko Kohtala Committed by Linus Torvalds

[PATCH] parport: buffer overflow fix

Fix potential buffer overflow in case the device ID did not end in semicolon.
Also might fail to negotiate back to IEEE1284_MODE_COMPAT in case of failure.
parport_device_id did not return what Documentation/parport-lowlevel.txt said,
so I changed it to match it.

Determining device ID length is overly complicated, but Tim Waugh recalled on
linux-parport seeing some buggy device that might need it.
Signed-off-by: default avatarMarko Kohtala <marko.kohtala@gmail.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 39ee059a
......@@ -128,8 +128,131 @@ static void parse_data(struct parport *port, int device, char *str)
kfree(txt);
}
/* Read up to count-1 bytes of device id. Terminate buffer with
* '\0'. Buffer begins with two Device ID length bytes as given by
* device. */
static ssize_t parport_read_device_id (struct parport *port, char *buffer,
size_t count)
{
unsigned char length[2];
unsigned lelen, belen;
size_t idlens[4];
unsigned numidlens;
unsigned current_idlen;
ssize_t retval;
size_t len;
/* First two bytes are MSB,LSB of inclusive length. */
retval = parport_read (port, length, 2);
if (retval < 0)
return retval;
if (retval != 2)
return -EIO;
if (count < 2)
return 0;
memcpy(buffer, length, 2);
len = 2;
/* Some devices wrongly send LE length, and some send it two
* bytes short. Construct a sorted array of lengths to try. */
belen = (length[0] << 8) + length[1];
lelen = (length[1] << 8) + length[0];
idlens[0] = min(belen, lelen);
idlens[1] = idlens[0]+2;
if (belen != lelen) {
int off = 2;
/* Don't try lenghts of 0x100 and 0x200 as 1 and 2 */
if (idlens[0] <= 2)
off = 0;
idlens[off] = max(belen, lelen);
idlens[off+1] = idlens[off]+2;
numidlens = off+2;
}
else {
/* Some devices don't truly implement Device ID, but
* just return constant nibble forever. This catches
* also those cases. */
if (idlens[0] == 0 || idlens[0] > 0xFFF) {
printk (KERN_DEBUG "%s: reported broken Device ID"
" length of %#zX bytes\n",
port->name, idlens[0]);
return -EIO;
}
numidlens = 2;
}
/* Try to respect the given ID length despite all the bugs in
* the ID length. Read according to shortest possible ID
* first. */
for (current_idlen = 0; current_idlen < numidlens; ++current_idlen) {
size_t idlen = idlens[current_idlen];
if (idlen+1 >= count)
break;
retval = parport_read (port, buffer+len, idlen-len);
if (retval < 0)
return retval;
len += retval;
if (port->physport->ieee1284.phase != IEEE1284_PH_HBUSY_DAVAIL) {
if (belen != len) {
printk (KERN_DEBUG "%s: Device ID was %d bytes"
" while device told it would be %d"
" bytes\n",
port->name, len, belen);
}
goto done;
}
/* This might end reading the Device ID too
* soon. Hopefully the needed fields were already in
* the first 256 bytes or so that we must have read so
* far. */
if (buffer[len-1] == ';') {
printk (KERN_DEBUG "%s: Device ID reading stopped"
" before device told data not available. "
"Current idlen %d of %d, len bytes %02X %02X\n",
port->name, current_idlen, numidlens,
length[0], length[1]);
goto done;
}
}
if (current_idlen < numidlens) {
/* Buffer not large enough, read to end of buffer. */
size_t idlen, len2;
if (len+1 < count) {
retval = parport_read (port, buffer+len, count-len-1);
if (retval < 0)
return retval;
len += retval;
}
/* Read the whole ID since some devices would not
* otherwise give back the Device ID from beginning
* next time when asked. */
idlen = idlens[current_idlen];
len2 = len;
while(len2 < idlen && retval > 0) {
char tmp[4];
retval = parport_read (port, tmp,
min(sizeof tmp, idlen-len2));
if (retval < 0)
return retval;
len2 += retval;
}
}
/* In addition, there are broken devices out there that don't
even finish off with a semi-colon. We do not need to care
about those at this time. */
done:
buffer[len] = '\0';
return len;
}
/* Get Std 1284 Device ID. */
ssize_t parport_device_id (int devnum, char *buffer, size_t len)
ssize_t parport_device_id (int devnum, char *buffer, size_t count)
{
ssize_t retval = -ENXIO;
struct pardevice *dev = parport_open (devnum, "Device ID probe",
......@@ -139,76 +262,20 @@ ssize_t parport_device_id (int devnum, char *buffer, size_t len)
parport_claim_or_block (dev);
/* Negotiate to compatibility mode, and then to device ID mode.
* (This is in case we are already in device ID mode.) */
/* Negotiate to compatibility mode, and then to device ID
* mode. (This so that we start form beginning of device ID if
* already in device ID mode.) */
parport_negotiate (dev->port, IEEE1284_MODE_COMPAT);
retval = parport_negotiate (dev->port,
IEEE1284_MODE_NIBBLE | IEEE1284_DEVICEID);
if (!retval) {
int idlen;
unsigned char length[2];
/* First two bytes are MSB,LSB of inclusive length. */
retval = parport_read (dev->port, length, 2);
if (retval != 2) goto end_id;
idlen = (length[0] << 8) + length[1] - 2;
/*
* Check if the caller-allocated buffer is large enough
* otherwise bail out or there will be an at least off by one.
*/
if (idlen + 1 < len)
len = idlen;
else {
retval = -EINVAL;
goto out;
}
retval = parport_read (dev->port, buffer, len);
if (retval != len)
printk (KERN_DEBUG "%s: only read %Zd of %Zd ID bytes\n",
dev->port->name, retval,
len);
/* Some printer manufacturers mistakenly believe that
the length field is supposed to be _exclusive_.
In addition, there are broken devices out there
that don't even finish off with a semi-colon. */
if (buffer[len - 1] != ';') {
ssize_t diff;
diff = parport_read (dev->port, buffer + len, 2);
retval += diff;
if (diff)
printk (KERN_DEBUG
"%s: device reported incorrect "
"length field (%d, should be %Zd)\n",
dev->port->name, idlen, retval);
else {
/* One semi-colon short of a device ID. */
buffer[len++] = ';';
printk (KERN_DEBUG "%s: faking semi-colon\n",
dev->port->name);
/* If we get here, I don't think we
need to worry about the possible
standard violation of having read
more than we were told to. The
device is non-compliant anyhow. */
}
}
end_id:
buffer[len] = '\0';
retval = parport_read_device_id (dev->port, buffer, count);
parport_negotiate (dev->port, IEEE1284_MODE_COMPAT);
}
if (retval > 2)
parse_data (dev->port, dev->daisy, buffer);
parse_data (dev->port, dev->daisy, buffer+2);
}
out:
parport_release (dev);
parport_close (dev);
return retval;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment