Commit c75a8a7a authored by Daniel Mack's avatar Daniel Mack Committed by Takashi Iwai

ALSA: snd-usb: add support for implicit feedback

Implicit feedback is a streaming mode that does not rely on dedicated
sync endpoints but uses the information provided by record streams to
clock output streams. Now that the streaming logic is decoupled from the
PCM streams, this is easy to implement.
Signed-off-by: default avatarDaniel Mack <zonque@gmail.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent d399ff95
......@@ -301,7 +301,7 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt)
struct usb_interface *iface;
unsigned int ep, attr;
int is_playback = subs->direction == SNDRV_PCM_STREAM_PLAYBACK;
int err;
int err, implicit_fb = 0;
iface = usb_ifnum_to_if(dev, fmt->iface);
if (WARN_ON(!iface))
......@@ -326,25 +326,34 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt)
* assume it as adaptive-out or sync-in.
*/
attr = fmt->ep_attr & USB_ENDPOINT_SYNCTYPE;
if (((is_playback && attr == USB_ENDPOINT_SYNC_ASYNC) ||
(! is_playback && attr == USB_ENDPOINT_SYNC_ADAPTIVE)) &&
altsd->bNumEndpoints >= 2) {
switch (subs->stream->chip->usb_id) {
case USB_ID(0x0763, 0x2080): /* M-Audio FastTrack Ultra */
case USB_ID(0x0763, 0x2081):
if (is_playback) {
implicit_fb = 1;
ep = 0x81;
iface = usb_ifnum_to_if(dev, 2);
if (!iface || iface->num_altsetting == 0)
return -EINVAL;
alts = &iface->altsetting[1];
goto add_sync_ep;
}
}
if (((is_playback && attr == USB_ENDPOINT_SYNC_ASYNC) ||
(!is_playback && attr == USB_ENDPOINT_SYNC_ADAPTIVE)) &&
altsd->bNumEndpoints >= 2) {
/* check sync-pipe endpoint */
/* ... and check descriptor size before accessing bSynchAddress
because there is a version of the SB Audigy 2 NX firmware lacking
the audio fields in the endpoint descriptors */
if ((get_endpoint(alts, 1)->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != 0x01 ||
(get_endpoint(alts, 1)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
get_endpoint(alts, 1)->bSynchAddress != 0)) {
get_endpoint(alts, 1)->bSynchAddress != 0 &&
!implicit_fb)) {
snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n",
dev->devnum, fmt->iface, fmt->altsetting);
return -EINVAL;
......@@ -352,16 +361,22 @@ static int set_format(struct snd_usb_substream *subs, struct audioformat *fmt)
ep = get_endpoint(alts, 1)->bEndpointAddress;
if (get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
(( is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress | USB_DIR_IN)) ||
(!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)))) {
(!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)) ||
( is_playback && !implicit_fb))) {
snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n",
dev->devnum, fmt->iface, fmt->altsetting);
return -EINVAL;
}
implicit_fb = (get_endpoint(alts, 1)->bmAttributes & USB_ENDPOINT_USAGE_MASK)
== USB_ENDPOINT_USAGE_IMPLICIT_FB;
add_sync_ep:
subs->sync_endpoint = snd_usb_add_endpoint(subs->stream->chip,
alts, ep, !subs->direction,
implicit_fb ?
SND_USB_ENDPOINT_TYPE_DATA :
SND_USB_ENDPOINT_TYPE_SYNC);
if (!subs->sync_endpoint)
return -EINVAL;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment