Skip to content

L
linux
Commit c81d3b34 authored by Matthew Dharm's avatar Matthew Dharm Committed by Greg Kroah-Hartman
Browse files
Options

[PATCH] USB storage: unusual_devs.h cleanups 

This patch re-sorts unusual_devs.h and removes some duplicate entries.
parent 21ba03e4
Show whitespace changes
Inline Side-by-side
Showing with 52 additions and 68 deletions
drivers/usb/storage/unusual_devs.h
View file @ c81d3b34
......@@ -252,6 +252,14 @@ UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100,
US_SC_UFI, US_PR_CB, NULL,
US_FL_SINGLE_LUN ),
#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110,
"Sony",
"Portable USB Harddrive V2",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
0 ),
#endif
UNUSUAL_DEV( 0x054c, 0x002d, 0x0100, 0x0100,
"Sony",
"Memorystick MSAC-US1",
......@@ -295,26 +303,6 @@ UNUSUAL_DEV( 0x059f, 0xa601, 0x0200, 0x0200,
"USB Hard Disk",
US_SC_RBC, US_PR_CB, NULL, 0 ),
/* This Pentax still camera is not conformant
* to the USB storage specification: -
* - It does not like the INQUIRY command. So we must handle this command
* of the SCSI layer ourselves.
* Tested on Rev. 10.00 (0x1000)
* Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
*/
UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
"Pentax",
"Optio 2/3/400",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* Submitted by Per Winkvist <per.winkvist@uk.com> */
UNUSUAL_DEV( 0x0a17, 0x006, 0x1000, 0x9009,
"Pentax",
"Optio S",
US_SC_8070, US_PR_CBI, NULL,
US_FL_FIX_INQUIRY ),
#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110,
"In-System",
......@@ -339,12 +327,6 @@ UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110,
"USB Storage Adapter V2",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
0 ),
UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110,
"Sony",
"Portable USB Harddrive V2",
US_SC_ISD200, US_PR_BULK, isd200_Initialization,
0 ),
#endif
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
......@@ -385,12 +367,6 @@ UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0x0001,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
UNUSUAL_DEV( 0x05e3, 0x0700, 0x0000, 0x9999,
"Unknown",
"GL641USB based CF Card reader",
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_FIX_INQUIRY | US_FL_MODE_XLATE),
/* Reported by Hanno Boeck <hanno@gmx.de>
* Taken from the Lycoris Kernel */
UNUSUAL_DEV( 0x0636, 0x0003, 0x0000, 0x9999,
......@@ -520,13 +496,6 @@ UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
"Simple Tech/Datafab CF+SM Reader",
US_SC_SCSI, US_PR_DATAFAB, NULL,
US_FL_MODE_XLATE ),
/* Submitted by Olaf Hering <olh@suse.de> */
UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
"Datafab Systems, Inc.",
"USB to CF + SM Combo (LC1)",
US_SC_SCSI, US_PR_DATAFAB, NULL,
US_FL_MODE_XLATE ),
#endif
#ifdef CONFIG_USB_STORAGE_SDDR55
......@@ -538,6 +507,15 @@ UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
US_FL_FIX_INQUIRY ),
#endif
#ifdef CONFIG_USB_STORAGE_DATAFAB
/* Submitted by Olaf Hering <olh@suse.de> */
UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff,
"Datafab Systems, Inc.",
"USB to CF + SM Combo (LC1)",
US_SC_SCSI, US_PR_DATAFAB, NULL,
US_FL_MODE_XLATE ),
#endif
/* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100
* Only revision 1.13 tested (same for all of the above devices,
* based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY.
......@@ -563,6 +541,22 @@ UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9009,
US_SC_8070, US_PR_CB, NULL,
US_FL_FIX_INQUIRY ),
/* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
"Samsung",
"Digimax 410",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY),
/* Aiptek PocketCAM 3Mega
* Nicolas DUPEUX <nicolas@dupeux.net>
*/
UNUSUAL_DEV( 0x08ca, 0x2011, 0x0000, 0x9999,
"AIPTEK",
"PocketCAM 3Mega",
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_MODE_XLATE ),
/* aeb */
UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
"Feiya",
......@@ -570,13 +564,6 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_FIX_CAPACITY ),
/* Submitted by Hartmut Wahl <hwahl@hwahl.de>*/
UNUSUAL_DEV( 0x0839, 0x000a, 0x0001, 0x0001,
"Samsung",
"Digimax 410",
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_FIX_INQUIRY),
UNUSUAL_DEV( 0x097a, 0x0001, 0x0000, 0x0001,
"Minds@Work",
"Digital Wallet",
......@@ -589,10 +576,24 @@ UNUSUAL_DEV( 0x0a16, 0x8888, 0x0100, 0x0100,
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_FIX_INQUIRY ),
UNUSUAL_DEV( 0x0a16, 0x8888, 0x0100, 0x0100,
"IBM",
"IBM USB Memory Key",
US_SC_SCSI, US_PR_BULK, NULL,
/* This Pentax still camera is not conformant
* to the USB storage specification: -
* - It does not like the INQUIRY command. So we must handle this command
* of the SCSI layer ourselves.
* Tested on Rev. 10.00 (0x1000)
* Submitted by James Courtier-Dutton <James@superbug.demon.co.uk>
*/
UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000,
"Pentax",
"Optio 2/3/400",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
/* Submitted by Per Winkvist <per.winkvist@uk.com> */
UNUSUAL_DEV( 0x0a17, 0x006, 0x1000, 0x9009,
"Pentax",
"Optio S",
US_SC_8070, US_PR_CBI, NULL,
US_FL_FIX_INQUIRY ),
#ifdef CONFIG_USB_STORAGE_ISD200
......@@ -603,13 +604,6 @@ UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
0 ),
#endif
/* EasyDisk support. Submitted by Stanislav Karchebny <berk@madfire.net> */
UNUSUAL_DEV( 0x1065, 0x2136, 0x0000, 0x0001,
"Global Channel Solutions",
"EasyDisk EDxxxx",
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_MODE_XLATE | US_FL_FIX_INQUIRY ),
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
* Entry is needed only for the initializer function override.
......@@ -638,13 +632,3 @@ UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999,
US_SC_SCSI, US_PR_SDDR55, NULL,
US_FL_SINGLE_LUN),
#endif
/* Aiptek PocketCAM 3Mega
* Nicolas DUPEUX <nicolas@dupeux.net>
*/
UNUSUAL_DEV( 0x08ca, 0x2011, 0x0000, 0x9999,
"AIPTEK",
"PocketCAM 3Mega",
US_SC_SCSI, US_PR_BULK, NULL,
US_FL_MODE_XLATE ),
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7