Skip to content

L
linux
Commit c8458413 authored by Paul Walmsley's avatar Paul Walmsley
Browse files
Options

Merge branches 'powerdomain_fixes_3.1', 'hardware_workarounds_3.1',... 

Merge branches 'powerdomain_fixes_3.1', 'hardware_workarounds_3.1', 'hwmod_dss_fix_3.1' and 'i2c_fixes_3.1' into prcm-fixes-3.1
parents 9a2a3603 a57341f7 6d3c55fd
Expand all Show whitespace changes
Inline Side-by-side
Showing with 3829 additions and 5823 deletions
arch/arm/mach-omap1/Makefile
View file @ c8458413
......@@ -4,14 +4,14 @@
# Common support
obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
obj-y += clock.o clock_data.o opp_data.o reset.o
obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o
obj-$(CONFIG_PM) += pm.o sleep.o
# DSP
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
......
arch/arm/mach-omap1/board-ams-delta.c
View file @ c8458413
......@@ -138,7 +138,7 @@ void ams_delta_latch2_write(u16 mask, u16 value)
static void __init ams_delta_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static struct map_desc ams_delta_io_desc[] __initdata = {
......@@ -391,7 +391,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
.reserve = omap_reserve,
.init_irq = ams_delta_init_irq,
.init_machine = ams_delta_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
EXPORT_SYMBOL(ams_delta_latch1_write);
......
arch/arm/mach-omap1/board-fsample.c
View file @ c8458413
......@@ -329,7 +329,7 @@ static void __init omap_fsample_init(void)
static void __init omap_fsample_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
......@@ -394,5 +394,5 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
.reserve = omap_reserve,
.init_irq = omap_fsample_init_irq,
.init_machine = omap_fsample_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-generic.c
View file @ c8458413
......@@ -31,7 +31,7 @@
static void __init omap_generic_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
/* assume no Mini-AB port */
......@@ -99,5 +99,5 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
.reserve = omap_reserve,
.init_irq = omap_generic_init_irq,
.init_machine = omap_generic_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-h2.c
View file @ c8458413
......@@ -376,7 +376,7 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = {
static void __init h2_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static struct omap_usb_config h2_usb_config __initdata = {
......@@ -466,5 +466,5 @@ MACHINE_START(OMAP_H2, "TI-H2")
.reserve = omap_reserve,
.init_irq = h2_init_irq,
.init_machine = h2_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-h3.c
View file @ c8458413
......@@ -439,7 +439,7 @@ static void __init h3_init(void)
static void __init h3_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static void __init h3_map_io(void)
......@@ -454,5 +454,5 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
.reserve = omap_reserve,
.init_irq = h3_init_irq,
.init_machine = h3_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-htcherald.c
View file @ c8458413
......@@ -605,7 +605,7 @@ static void __init htcherald_init_irq(void)
{
printk(KERN_INFO "htcherald_init_irq.\n");
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
MACHINE_START(HERALD, "HTC Herald")
......@@ -616,5 +616,5 @@ MACHINE_START(HERALD, "HTC Herald")
.reserve = omap_reserve,
.init_irq = htcherald_init_irq,
.init_machine = htcherald_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-innovator.c
View file @ c8458413
......@@ -292,7 +292,7 @@ static void __init innovator_init_smc91x(void)
static void __init innovator_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
#ifdef CONFIG_ARCH_OMAP15XX
......@@ -464,5 +464,5 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
.reserve = omap_reserve,
.init_irq = innovator_init_irq,
.init_machine = innovator_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-nokia770.c
View file @ c8458413
......@@ -51,7 +51,7 @@ static void __init omap_nokia770_init_irq(void)
omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static const unsigned int nokia770_keymap[] = {
......@@ -269,5 +269,5 @@ MACHINE_START(NOKIA770, "Nokia 770")
.reserve = omap_reserve,
.init_irq = omap_nokia770_init_irq,
.init_machine = omap_nokia770_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-osk.c
View file @ c8458413
......@@ -282,7 +282,7 @@ static void __init osk_init_cf(void)
static void __init osk_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static struct omap_usb_config osk_usb_config __initdata = {
......@@ -588,5 +588,5 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
.reserve = omap_reserve,
.init_irq = osk_init_irq,
.init_machine = osk_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-palmte.c
View file @ c8458413
......@@ -62,7 +62,7 @@
static void __init omap_palmte_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static const unsigned int palmte_keymap[] = {
......@@ -280,5 +280,5 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
.reserve = omap_reserve,
.init_irq = omap_palmte_init_irq,
.init_machine = omap_palmte_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-palmtt.c
View file @ c8458413
......@@ -266,7 +266,7 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = {
static void __init omap_palmtt_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static struct omap_usb_config palmtt_usb_config __initdata = {
......@@ -326,5 +326,5 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
.reserve = omap_reserve,
.init_irq = omap_palmtt_init_irq,
.init_machine = omap_palmtt_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-palmz71.c
View file @ c8458413
......@@ -61,7 +61,7 @@ static void __init
omap_palmz71_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static const unsigned int palmz71_keymap[] = {
......@@ -346,5 +346,5 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
.reserve = omap_reserve,
.init_irq = omap_palmz71_init_irq,
.init_machine = omap_palmz71_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-perseus2.c
View file @ c8458413
......@@ -297,7 +297,7 @@ static void __init omap_perseus2_init(void)
static void __init omap_perseus2_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc omap_perseus2_io_desc[] __initdata = {
......@@ -355,5 +355,5 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
.reserve = omap_reserve,
.init_irq = omap_perseus2_init_irq,
.init_machine = omap_perseus2_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-sx1.c
View file @ c8458413
......@@ -411,7 +411,7 @@ static void __init omap_sx1_init(void)
static void __init omap_sx1_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
/*----------------------------------------*/
......@@ -426,5 +426,5 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
.reserve = omap_reserve,
.init_irq = omap_sx1_init_irq,
.init_machine = omap_sx1_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/board-voiceblue.c
View file @ c8458413
......@@ -162,7 +162,7 @@ static struct omap_board_config_kernel voiceblue_config[] = {
static void __init voiceblue_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap1_init_irq();
}
static void __init voiceblue_map_io(void)
......@@ -306,5 +306,5 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
.reserve = omap_reserve,
.init_irq = voiceblue_init_irq,
.init_machine = voiceblue_init,
.timer = &omap_timer,
.timer = &omap1_timer,
MACHINE_END
arch/arm/mach-omap1/irq.c
View file @ c8458413
......@@ -175,7 +175,7 @@ static struct irq_chip omap_irq_chip = {
.irq_set_wake = omap_wake_irq,
};
void __init omap_init_irq(void)
void __init omap1_init_irq(void)
{
int i, j;
......
arch/arm/mach-omap1/mcbsp.c
View file @ c8458413
......@@ -38,7 +38,7 @@ static void omap1_mcbsp_request(unsigned int id)
* On 1510, 1610 and 1710, McBSP1 and McBSP3
* are DSP public peripherals.
*/
if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
if (id == 0 || id == 2) {
if (dsp_use++ == 0) {
api_clk = clk_get(NULL, "api_ck");
dsp_clk = clk_get(NULL, "dsp_ck");
......@@ -59,7 +59,7 @@ static void omap1_mcbsp_request(unsigned int id)
static void omap1_mcbsp_free(unsigned int id)
{
if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
if (id == 0 || id == 2) {
if (--dsp_use == 0) {
if (!IS_ERR(api_clk)) {
clk_disable(api_clk);
......
arch/arm/mach-omap1/pm_bus.c
View file @ c8458413
......@@ -56,9 +56,13 @@ static struct dev_power_domain default_power_domain = {
USE_PLATFORM_PM_SLEEP_OPS
},
};
#define OMAP1_PWR_DOMAIN (&default_power_domain)
#else
#define OMAP1_PWR_DOMAIN NULL
#endif /* CONFIG_PM_RUNTIME */
static struct pm_clk_notifier_block platform_bus_notifier = {
.pwr_domain = &default_power_domain,
.pwr_domain = OMAP1_PWR_DOMAIN,
.con_ids = { "ick", "fck", NULL, },
};
......@@ -72,4 +76,4 @@ static int __init omap1_pm_runtime_init(void)
return 0;
}
core_initcall(omap1_pm_runtime_init);
#endif /* CONFIG_PM_RUNTIME */
arch/arm/mach-omap1/time.c
View file @ c8458413
......@@ -297,7 +297,7 @@ static inline int omap_32k_timer_usable(void)
* Timer initialization
* ---------------------------------------------------------------------------
*/
static void __init omap_timer_init(void)
static void __init omap1_timer_init(void)
{
if (omap_32k_timer_usable()) {
preferred_sched_clock_init(1);
......@@ -307,6 +307,6 @@ static void __init omap_timer_init(void)
}
}
struct sys_timer omap_timer = {
.init = omap_timer_init,
struct sys_timer omap1_timer = {
.init = omap1_timer_init,
};
arch/arm/mach-omap1/timer32k.c
View file @ c8458413
......@@ -183,10 +183,6 @@ static __init void omap_init_32k_timer(void)
bool __init omap_32k_timer_init(void)
{
omap_init_clocksource_32k();
#ifdef CONFIG_OMAP_DM_TIMER
omap_dm_timer_init();
#endif
omap_init_32k_timer();
return true;
......
arch/arm/mach-omap2/Makefile
View file @ c8458413
......@@ -3,7 +3,7 @@
#
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o
omap-2-3-common = irq.o sdrc.o
......@@ -145,9 +145,19 @@ obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o
# hwmod data
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o
obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o \
omap_hwmod_2xxx_3xxx_ipblock_data.o \
omap_hwmod_2xxx_interconnect_data.o \
omap_hwmod_2xxx_3xxx_interconnect_data.o \
omap_hwmod_2420_data.o
obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_ipblock_data.o \
omap_hwmod_2xxx_3xxx_ipblock_data.o \
omap_hwmod_2xxx_interconnect_data.o \
omap_hwmod_2xxx_3xxx_interconnect_data.o \
omap_hwmod_2430_data.o
obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o \
omap_hwmod_2xxx_3xxx_interconnect_data.o \
omap_hwmod_3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
# EMU peripherals
......@@ -269,4 +279,4 @@ obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o
disp-$(CONFIG_OMAP2_DSS) := display.o
obj-y += $(disp-m) $(disp-y)
obj-y += common-board-devices.o
obj-y += common-board-devices.o twl-common.o
arch/arm/mach-omap2/board-2430sdp.c
View file @ c8458413
......@@ -260,7 +260,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
.reserve = omap_reserve,
.map_io = omap_2430sdp_map_io,
.init_early = omap_2430sdp_init_early,
.init_irq = omap_init_irq,
.init_irq = omap2_init_irq,
.init_machine = omap_2430sdp_init,
.timer = &omap_timer,
.timer = &omap2_timer,
MACHINE_END
arch/arm/mach-omap2/board-3430sdp.c
View file @ c8458413
......@@ -231,22 +231,6 @@ static void __init omap_3430sdp_init_early(void)
omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL);
}
static int sdp3430_batt_table[] = {
/* 0 C*/
30800, 29500, 28300, 27100,
26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
4040, 3910, 3790, 3670, 3550
};
static struct twl4030_bci_platform_data sdp3430_bci_data = {
.battery_tmp_tbl = sdp3430_batt_table,
.tblsize = ARRAY_SIZE(sdp3430_batt_table),
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
......@@ -292,14 +276,6 @@ static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
.setup = sdp3430_twl_gpio_setup,
};
static struct twl4030_usb_data sdp3430_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_madc_platform_data sdp3430_madc_data = {
.irq_line = 1,
};
/* regulator consumer mappings */
/* ads7846 on SPI */
......@@ -307,16 +283,6 @@ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
REGULATOR_SUPPLY("vcc", "spi1.0"),
};
static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};
/* VPLL2 for digital video outputs */
static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
......@@ -433,54 +399,10 @@ static struct regulator_init_data sdp3430_vsim = {
.consumer_supplies = sdp3430_vsim_supplies,
};
/* VDAC for DSS driving S-Video */
static struct regulator_init_data sdp3430_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(sdp3430_vdda_dac_supplies),
.consumer_supplies = sdp3430_vdda_dac_supplies,
};
static struct regulator_init_data sdp3430_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies),
.consumer_supplies = sdp3430_vpll2_supplies,
};
static struct twl4030_codec_audio_data sdp3430_audio;
static struct twl4030_codec_data sdp3430_codec = {
.audio_mclk = 26000000,
.audio = &sdp3430_audio,
};
static struct twl4030_platform_data sdp3430_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.bci = &sdp3430_bci_data,
.gpio = &sdp3430_gpio_data,
.madc = &sdp3430_madc_data,
.keypad = &sdp3430_kp_data,
.usb = &sdp3430_usb_data,
.codec = &sdp3430_codec,
.vaux1 = &sdp3430_vaux1,
.vaux2 = &sdp3430_vaux2,
......@@ -489,14 +411,21 @@ static struct twl4030_platform_data sdp3430_twldata = {
.vmmc1 = &sdp3430_vmmc1,
.vmmc2 = &sdp3430_vmmc2,
.vsim = &sdp3430_vsim,
.vdac = &sdp3430_vdac,
.vpll2 = &sdp3430_vpll2,
};
static int __init omap3430_i2c_init(void)
{
/* i2c1 for PMIC only */
omap3_pmic_get_config(&sdp3430_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
sdp3430_twldata.vdac->constraints.apply_uV = true;
sdp3430_twldata.vpll2->constraints.apply_uV = true;
sdp3430_twldata.vpll2->constraints.name = "VDVI";
omap3_pmic_init("twl4030", &sdp3430_twldata);
/* i2c2 on camera connector (for sensor control) and optional isp1301 */
omap_register_i2c_bus(2, 400, NULL, 0);
/* i2c3 on display connector (for DVI, tfp410) */
......@@ -804,7 +733,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_3430sdp_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap_3430sdp_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-3630sdp.c
View file @ c8458413
......@@ -219,7 +219,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_sdp_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap_sdp_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-4430sdp.c
View file @ c8458413
......@@ -40,7 +40,6 @@
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
#include "control.h"
#include "common-board-devices.h"
......@@ -295,9 +294,6 @@ static void __init omap_4430sdp_init_early(void)
{
omap2_init_common_infrastructure();
omap2_init_common_devices(NULL, NULL);
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(1);
#endif
}
static struct omap_musb_board_data musb_board_data = {
......@@ -306,14 +302,6 @@ static struct omap_musb_board_data musb_board_data = {
.power = 100,
};
static struct twl4030_usb_data omap4_usbphy_data = {
.phy_init = omap4430_phy_init,
.phy_exit = omap4430_phy_exit,
.phy_power = omap4430_phy_power,
.phy_set_clock = omap4430_phy_set_clk,
.phy_suspend = omap4430_phy_suspend,
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 2,
......@@ -333,16 +321,7 @@ static struct omap2_hsmmc_info mmc[] = {
};
static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
{
.supply = "vmmc",
.dev_name = "omap_hsmmc.1",
},
};
static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
{
.supply = "vmmc",
.dev_name = "omap_hsmmc.0",
},
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
......@@ -399,65 +378,10 @@ static struct regulator_init_data sdp4430_vaux1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.num_consumer_supplies = ARRAY_SIZE(sdp4430_vaux_supply),
.consumer_supplies = sdp4430_vaux_supply,
};
static struct regulator_init_data sdp4430_vaux2 = {
.constraints = {
.min_uV = 1200000,
.max_uV = 2800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vaux3 = {
.constraints = {
.min_uV = 1000000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
/* VMMC1 for MMC1 card */
static struct regulator_init_data sdp4430_vmmc = {
.constraints = {
.min_uV = 1200000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = sdp4430_vmmc_supply,
};
static struct regulator_init_data sdp4430_vpp = {
.constraints = {
.min_uV = 1800000,
.max_uV = 2500000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vusim = {
.constraints = {
.min_uV = 1200000,
......@@ -471,74 +395,10 @@ static struct regulator_init_data sdp4430_vusim = {
},
};
static struct regulator_init_data sdp4430_vana = {
.constraints = {
.min_uV = 2100000,
.max_uV = 2100000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vcxio = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_vusb = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data sdp4430_clk32kg = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
};
static struct twl4030_platform_data sdp4430_twldata = {
.irq_base = TWL6030_IRQ_BASE,
.irq_end = TWL6030_IRQ_END,
/* Regulators */
.vmmc = &sdp4430_vmmc,
.vpp = &sdp4430_vpp,
.vusim = &sdp4430_vusim,
.vana = &sdp4430_vana,
.vcxio = &sdp4430_vcxio,
.vdac = &sdp4430_vdac,
.vusb = &sdp4430_vusb,
.vaux1 = &sdp4430_vaux1,
.vaux2 = &sdp4430_vaux2,
.vaux3 = &sdp4430_vaux3,
.clk32kg = &sdp4430_clk32kg,
.usb = &omap4_usbphy_data
};
static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = {
......@@ -556,6 +416,16 @@ static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = {
};
static int __init omap4_i2c_init(void)
{
omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB,
TWL_COMMON_REGULATOR_VDAC |
TWL_COMMON_REGULATOR_VAUX2 |
TWL_COMMON_REGULATOR_VAUX3 |
TWL_COMMON_REGULATOR_VMMC |
TWL_COMMON_REGULATOR_VPP |
TWL_COMMON_REGULATOR_VANA |
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
TWL_COMMON_REGULATOR_CLK32KG);
omap4_pmic_init("twl6030", &sdp4430_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
......@@ -773,5 +643,5 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
.init_early = omap_4430sdp_init_early,
.init_irq = gic_init_irq,
.init_machine = omap_4430sdp_init,
.timer = &omap_timer,
.timer = &omap4_timer,
MACHINE_END
arch/arm/mach-omap2/board-am3517crane.c
View file @ c8458413
......@@ -104,7 +104,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = am3517_crane_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = am3517_crane_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-am3517evm.c
View file @ c8458413
......@@ -494,7 +494,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = am3517_evm_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = am3517_evm_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-apollon.c
View file @ c8458413
......@@ -354,7 +354,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
.reserve = omap_reserve,
.map_io = omap_apollon_map_io,
.init_early = omap_apollon_init_early,
.init_irq = omap_init_irq,
.init_irq = omap2_init_irq,
.init_machine = omap_apollon_init,
.timer = &omap_timer,
.timer = &omap2_timer,
MACHINE_END
arch/arm/mach-omap2/board-cm-t35.c
View file @ c8458413
......@@ -162,9 +162,7 @@ static struct mtd_partition cm_t35_nand_partitions[] = {
static struct omap_nand_platform_data cm_t35_nand_data = {
.parts = cm_t35_nand_partitions,
.nr_parts = ARRAY_SIZE(cm_t35_nand_partitions),
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
.cs = 0,
};
static void __init cm_t35_init_nand(void)
......@@ -337,19 +335,17 @@ static void __init cm_t35_init_display(void)
}
}
static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply cm_t35_vsim_supply = {
.supply = "vmmc_aux",
static struct regulator_consumer_supply cm_t35_vsim_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply cm_t35_vdac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
static struct regulator_consumer_supply cm_t35_vdvi_supply =
REGULATOR_SUPPLY("vdvi", "omapdss");
static struct regulator_consumer_supply cm_t35_vdvi_supply[] = {
REGULATOR_SUPPLY("vdvi", "omapdss"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data cm_t35_vmmc1 = {
......@@ -362,8 +358,8 @@ static struct regulator_init_data cm_t35_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &cm_t35_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(cm_t35_vmmc1_supply),
.consumer_supplies = cm_t35_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
......@@ -377,41 +373,8 @@ static struct regulator_init_data cm_t35_vsim = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &cm_t35_vsim_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data cm_t35_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &cm_t35_vdac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data cm_t35_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &cm_t35_vdvi_supply,
};
static struct twl4030_usb_data cm_t35_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
.num_consumer_supplies = ARRAY_SIZE(cm_t35_vsim_supply),
.consumer_supplies = cm_t35_vsim_supply,
};
static uint32_t cm_t35_keymap[] = {
......@@ -481,10 +444,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
cm_t35_vmmc1_supply.dev = mmc[0].dev;
cm_t35_vsim_supply.dev = mmc[0].dev;
return 0;
}
......@@ -496,21 +455,23 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
};
static struct twl4030_platform_data cm_t35_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.keypad = &cm_t35_kp_data,
.usb = &cm_t35_usb_data,
.gpio = &cm_t35_gpio_data,
.vmmc1 = &cm_t35_vmmc1,
.vsim = &cm_t35_vsim,
.vdac = &cm_t35_vdac,
.vpll2 = &cm_t35_vpll2,
};
static void __init cm_t35_init_i2c(void)
{
omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
cm_t35_twldata.vpll2->constraints.name = "VDVI";
cm_t35_twldata.vpll2->num_consumer_supplies =
ARRAY_SIZE(cm_t35_vdvi_supply);
cm_t35_twldata.vpll2->consumer_supplies = cm_t35_vdvi_supply;
omap3_pmic_init("tps65930", &cm_t35_twldata);
}
......@@ -646,7 +607,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = cm_t35_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = cm_t35_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-cm-t3517.c
View file @ c8458413
......@@ -236,7 +236,6 @@ static struct mtd_partition cm_t3517_nand_partitions[] = {
static struct omap_nand_platform_data cm_t3517_nand_data = {
.parts = cm_t3517_nand_partitions,
.nr_parts = ARRAY_SIZE(cm_t3517_nand_partitions),
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
.cs = 0,
};
......@@ -304,7 +303,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = cm_t3517_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = cm_t3517_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-devkit8000.c
View file @ c8458413
......@@ -58,7 +58,6 @@
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
#include "common-board-devices.h"
#define OMAP_DM9000_GPIO_IRQ 25
......@@ -130,13 +129,14 @@ static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
gpio_set_value_cansleep(dssdev->reset_gpio, 0);
}
static struct regulator_consumer_supply devkit8000_vmmc1_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
/* ads7846 on SPI */
static struct regulator_consumer_supply devkit8000_vio_supply =
REGULATOR_SUPPLY("vcc", "spi2.0");
static struct regulator_consumer_supply devkit8000_vio_supply[] = {
REGULATOR_SUPPLY("vcc", "spi2.0"),
};
static struct panel_generic_dpi_data lcd_panel = {
.name = "generic",
......@@ -186,9 +186,6 @@ static struct omap_dss_board_info devkit8000_dss_data = {
.default_device = &devkit8000_lcd_device,
};
static struct regulator_consumer_supply devkit8000_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_1),
KEY(1, 0, KEY_2),
......@@ -284,22 +281,8 @@ static struct regulator_init_data devkit8000_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &devkit8000_vmmc1_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data devkit8000_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &devkit8000_vdda_dac_supply,
.num_consumer_supplies = ARRAY_SIZE(devkit8000_vmmc1_supply),
.consumer_supplies = devkit8000_vmmc1_supply,
};
/* VPLL1 for digital video outputs */
......@@ -327,31 +310,14 @@ static struct regulator_init_data devkit8000_vio = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &devkit8000_vio_supply,
};
static struct twl4030_usb_data devkit8000_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_codec_audio_data devkit8000_audio_data;
static struct twl4030_codec_data devkit8000_codec_data = {
.audio_mclk = 26000000,
.audio = &devkit8000_audio_data,
.num_consumer_supplies = ARRAY_SIZE(devkit8000_vio_supply),
.consumer_supplies = devkit8000_vio_supply,
};
static struct twl4030_platform_data devkit8000_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &devkit8000_usb_data,
.gpio = &devkit8000_gpio_data,
.codec = &devkit8000_codec_data,
.vmmc1 = &devkit8000_vmmc1,
.vdac = &devkit8000_vdac,
.vpll1 = &devkit8000_vpll1,
.vio = &devkit8000_vio,
.keypad = &devkit8000_kp_data,
......@@ -359,6 +325,9 @@ static struct twl4030_platform_data devkit8000_twldata = {
static int __init devkit8000_i2c_init(void)
{
omap3_pmic_get_config(&devkit8000_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC);
omap3_pmic_init("tps65930", &devkit8000_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
......@@ -438,10 +407,7 @@ static void __init devkit8000_init_early(void)
static void __init devkit8000_init_irq(void)
{
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap3_init_irq();
}
#define OMAP_DM9000_BASE 0x2c000000
......@@ -707,5 +673,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
.init_early = devkit8000_init_early,
.init_irq = devkit8000_init_irq,
.init_machine = devkit8000_init,
.timer = &omap_timer,
.timer = &omap3_secure_timer,
MACHINE_END
arch/arm/mach-omap2/board-flash.c
View file @ c8458413
......@@ -132,11 +132,7 @@ static struct gpmc_timings nand_timings = {
};
static struct omap_nand_platform_data board_nand_data = {
.nand_setup = NULL,
.gpmc_t = &nand_timings,
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
.dev_ready = NULL,
.devsize = 0, /* '0' for 8-bit, '1' for 16-bit device */
};
void
......
arch/arm/mach-omap2/board-generic.c
View file @ c8458413
......@@ -70,7 +70,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
.reserve = omap_reserve,
.map_io = omap_generic_map_io,
.init_early = omap_generic_init_early,
.init_irq = omap_init_irq,
.init_irq = omap2_init_irq,
.init_machine = omap_generic_init,
.timer = &omap_timer,
.timer = &omap2_timer,
MACHINE_END
arch/arm/mach-omap2/board-h4.c
View file @ c8458413
......@@ -298,7 +298,7 @@ static void __init omap_h4_init_early(void)
static void __init omap_h4_init_irq(void)
{
omap_init_irq();
omap2_init_irq();
}
static struct at24_platform_data m24c01 = {
......@@ -388,5 +388,5 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
.init_early = omap_h4_init_early,
.init_irq = omap_h4_init_irq,
.init_machine = omap_h4_init,
.timer = &omap_timer,
.timer = &omap2_timer,
MACHINE_END
arch/arm/mach-omap2/board-igep0020.c
View file @ c8458413
......@@ -222,8 +222,9 @@ static inline void __init igep2_init_smsc911x(void)
static inline void __init igep2_init_smsc911x(void) { }
#endif
static struct regulator_consumer_supply igep_vmmc1_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
static struct regulator_consumer_supply igep_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data igep_vmmc1 = {
......@@ -236,12 +237,13 @@ static struct regulator_init_data igep_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &igep_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(igep_vmmc1_supply),
.consumer_supplies = igep_vmmc1_supply,
};
static struct regulator_consumer_supply igep_vio_supply =
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1");
static struct regulator_consumer_supply igep_vio_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
};
static struct regulator_init_data igep_vio = {
.constraints = {
......@@ -254,20 +256,21 @@ static struct regulator_init_data igep_vio = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &igep_vio_supply,
.num_consumer_supplies = ARRAY_SIZE(igep_vio_supply),
.consumer_supplies = igep_vio_supply,
};
static struct regulator_consumer_supply igep_vmmc2_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
static struct regulator_consumer_supply igep_vmmc2_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
static struct regulator_init_data igep_vmmc2 = {
.constraints = {
.valid_modes_mask = REGULATOR_MODE_NORMAL,
.always_on = 1,
},
.num_consumer_supplies = 1,
.consumer_supplies = &igep_vmmc2_supply,
.num_consumer_supplies = ARRAY_SIZE(igep_vmmc2_supply),
.consumer_supplies = igep_vmmc2_supply,
};
static struct fixed_voltage_config igep_vwlan = {
......@@ -440,10 +443,6 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
.setup = igep_twl_gpio_setup,
};
static struct twl4030_usb_data igep_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static int igep2_enable_dvi(struct omap_dss_device *dssdev)
{
gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
......@@ -480,26 +479,6 @@ static struct omap_dss_board_info igep2_dss_data = {
.default_device = &igep2_dvi_device,
};
static struct regulator_consumer_supply igep2_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_init_data igep2_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(igep2_vpll2_supplies),
.consumer_supplies = igep2_vpll2_supplies,
};
static void __init igep2_display_init(void)
{
int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH,
......@@ -519,13 +498,6 @@ static void __init igep_init_early(void)
m65kxxxxam_sdrc_params);
}
static struct twl4030_codec_audio_data igep2_audio_data;
static struct twl4030_codec_data igep2_codec_data = {
.audio_mclk = 26000000,
.audio = &igep2_audio_data,
};
static int igep2_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
......@@ -558,11 +530,7 @@ static struct twl4030_keypad_data igep2_keypad_pdata = {
};
static struct twl4030_platform_data igep_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &igep_usb_data,
.gpio = &igep_twl4030_gpio_pdata,
.vmmc1 = &igep_vmmc1,
.vio = &igep_vio,
......@@ -578,6 +546,8 @@ static void __init igep_i2c_init(void)
{
int ret;
omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0);
if (machine_is_igep0020()) {
/*
* Bus 3 is attached to the DVI port where devices like the
......@@ -588,9 +558,12 @@ static void __init igep_i2c_init(void)
if (ret)
pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);
igep_twldata.codec = &igep2_codec_data;
igep_twldata.keypad = &igep2_keypad_pdata;
igep_twldata.vpll2 = &igep2_vpll2;
/* Get common pmic data */
omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VPLL2);
igep_twldata.vpll2->constraints.apply_uV = true;
igep_twldata.vpll2->constraints.name = "VDVI";
}
omap3_pmic_init("twl4030", &igep_twldata);
......@@ -703,9 +676,9 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = igep_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(IGEP0030, "IGEP OMAP3 module")
......@@ -713,7 +686,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = igep_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = igep_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-ldp.c
View file @ c8458413
......@@ -199,22 +199,14 @@ static void __init omap_ldp_init_early(void)
omap2_init_common_devices(NULL, NULL);
}
static struct twl4030_usb_data ldp_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_gpio_platform_data ldp_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
};
static struct twl4030_madc_platform_data ldp_madc_data = {
.irq_line = 1,
};
static struct regulator_consumer_supply ldp_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
......@@ -228,8 +220,8 @@ static struct regulator_init_data ldp_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &ldp_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(ldp_vmmc1_supply),
.consumer_supplies = ldp_vmmc1_supply,
};
/* ads7846 on SPI */
......@@ -253,12 +245,7 @@ static struct regulator_init_data ldp_vaux1 = {
};
static struct twl4030_platform_data ldp_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.madc = &ldp_madc_data,
.usb = &ldp_usb_data,
.vmmc1 = &ldp_vmmc1,
.vaux1 = &ldp_vaux1,
.gpio = &ldp_gpio_data,
......@@ -267,6 +254,8 @@ static struct twl4030_platform_data ldp_twldata = {
static int __init omap_i2c_init(void)
{
omap3_pmic_get_config(&ldp_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0);
omap3_pmic_init("twl4030", &ldp_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
......@@ -341,8 +330,6 @@ static void __init omap_ldp_init(void)
ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
ldp_vmmc1_supply.dev = mmc[0].dev;
}
MACHINE_START(OMAP_LDP, "OMAP LDP board")
......@@ -350,7 +337,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_ldp_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap_ldp_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-n8x0.c
View file @ c8458413
......@@ -699,9 +699,9 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
.reserve = omap_reserve,
.map_io = n8x0_map_io,
.init_early = n8x0_init_early,
.init_irq = omap_init_irq,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap_timer,
.timer = &omap2_timer,
MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
......@@ -709,9 +709,9 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
.reserve = omap_reserve,
.map_io = n8x0_map_io,
.init_early = n8x0_init_early,
.init_irq = omap_init_irq,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap_timer,
.timer = &omap2_timer,
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
......@@ -719,7 +719,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
.reserve = omap_reserve,
.map_io = n8x0_map_io,
.init_early = n8x0_init_early,
.init_irq = omap_init_irq,
.init_irq = omap2_init_irq,
.init_machine = n8x0_init_machine,
.timer = &omap_timer,
.timer = &omap2_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap3beagle.c
View file @ c8458413
......@@ -50,7 +50,6 @@
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
#include "pm.h"
#include "common-board-devices.h"
......@@ -210,14 +209,6 @@ static struct omap_dss_board_info beagle_dss_data = {
.default_device = &beagle_dvi_device,
};
static struct regulator_consumer_supply beagle_vdac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
static struct regulator_consumer_supply beagle_vdvi_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static void __init beagle_display_init(void)
{
int r;
......@@ -239,12 +230,12 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
static struct regulator_consumer_supply beagle_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply beagle_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply beagle_vsim_supply = {
.supply = "vmmc_aux",
static struct regulator_consumer_supply beagle_vsim_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
static struct gpio_led gpio_leds[];
......@@ -267,10 +258,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
beagle_vmmc1_supply.dev = mmc[0].dev;
beagle_vsim_supply.dev = mmc[0].dev;
/*
* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
* high / others active low)
......@@ -336,8 +323,8 @@ static struct regulator_init_data beagle_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &beagle_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(beagle_vmmc1_supply),
.consumer_supplies = beagle_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
......@@ -351,62 +338,15 @@ static struct regulator_init_data beagle_vsim = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &beagle_vsim_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data beagle_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &beagle_vdac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data beagle_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(beagle_vdvi_supplies),
.consumer_supplies = beagle_vdvi_supplies,
};
static struct twl4030_usb_data beagle_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_codec_audio_data beagle_audio_data;
static struct twl4030_codec_data beagle_codec_data = {
.audio_mclk = 26000000,
.audio = &beagle_audio_data,
.num_consumer_supplies = ARRAY_SIZE(beagle_vsim_supply),
.consumer_supplies = beagle_vsim_supply,
};
static struct twl4030_platform_data beagle_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &beagle_usb_data,
.gpio = &beagle_gpio_data,
.codec = &beagle_codec_data,
.vmmc1 = &beagle_vmmc1,
.vsim = &beagle_vsim,
.vdac = &beagle_vdac,
.vpll2 = &beagle_vpll2,
};
static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
......@@ -417,6 +357,12 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
static int __init omap3_beagle_i2c_init(void)
{
omap3_pmic_get_config(&beagle_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
beagle_twldata.vpll2->constraints.name = "VDVI";
omap3_pmic_init("twl4030", &beagle_twldata);
/* Bus 3 is attached to the DVI port where devices like the pico DLP
* projector don't work reliably with 400kHz */
......@@ -486,10 +432,7 @@ static void __init omap3_beagle_init_early(void)
static void __init omap3_beagle_init_irq(void)
{
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap3_init_irq();
}
static struct platform_device *omap3_beagle_devices[] __initdata = {
......@@ -599,5 +542,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
.init_early = omap3_beagle_init_early,
.init_irq = omap3_beagle_init_irq,
.init_machine = omap3_beagle_init,
.timer = &omap_timer,
.timer = &omap3_secure_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap3evm.c
View file @ c8458413
......@@ -273,12 +273,12 @@ static struct omap_dss_board_info omap3_evm_dss_data = {
.default_device = &omap3_evm_lcd_device,
};
static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply omap3evm_vsim_supply = {
.supply = "vmmc_aux",
static struct regulator_consumer_supply omap3evm_vsim_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
......@@ -292,8 +292,8 @@ static struct regulator_init_data omap3evm_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3evm_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc1_supply),
.consumer_supplies = omap3evm_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
......@@ -307,8 +307,8 @@ static struct regulator_init_data omap3evm_vsim = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3evm_vsim_supply,
.num_consumer_supplies = ARRAY_SIZE(omap3evm_vsim_supply),
.consumer_supplies = omap3evm_vsim_supply,
};
static struct omap2_hsmmc_info mmc[] = {
......@@ -365,10 +365,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
omap3evm_vmmc1_supply.dev = mmc[0].dev;
omap3evm_vsim_supply.dev = mmc[0].dev;
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
* the P2 connector; notably LEDA for the LCD backlight.
......@@ -400,10 +396,6 @@ static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
.setup = omap3evm_twl_gpio_setup,
};
static struct twl4030_usb_data omap3evm_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_DOWN),
......@@ -438,58 +430,10 @@ static struct twl4030_keypad_data omap3evm_kp_data = {
.rep = 1,
};
static struct twl4030_madc_platform_data omap3evm_madc_data = {
.irq_line = 1,
};
static struct twl4030_codec_audio_data omap3evm_audio_data;
static struct twl4030_codec_data omap3evm_codec_data = {
.audio_mclk = 26000000,
.audio = &omap3evm_audio_data,
};
static struct regulator_consumer_supply omap3_evm_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
/* VDAC for DSS driving S-Video */
static struct regulator_init_data omap3_evm_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3_evm_vdda_dac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_init_data omap3_evm_vpll2 = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap3_evm_vpll2_supplies),
.consumer_supplies = omap3_evm_vpll2_supplies,
};
/* ads7846 on SPI */
static struct regulator_consumer_supply omap3evm_vio_supply =
REGULATOR_SUPPLY("vcc", "spi1.0");
static struct regulator_consumer_supply omap3evm_vio_supply[] = {
REGULATOR_SUPPLY("vcc", "spi1.0"),
};
/* VIO for ads7846 */
static struct regulator_init_data omap3evm_vio = {
......@@ -502,8 +446,8 @@ static struct regulator_init_data omap3evm_vio = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3evm_vio_supply,
.num_consumer_supplies = ARRAY_SIZE(omap3evm_vio_supply),
.consumer_supplies = omap3evm_vio_supply,
};
#ifdef CONFIG_WL12XX_PLATFORM_DATA
......@@ -511,16 +455,17 @@ static struct regulator_init_data omap3evm_vio = {
#define OMAP3EVM_WLAN_PMENA_GPIO (150)
#define OMAP3EVM_WLAN_IRQ_GPIO (149)
static struct regulator_consumer_supply omap3evm_vmmc2_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
/* VMMC2 for driving the WL12xx module */
static struct regulator_init_data omap3evm_vmmc2 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3evm_vmmc2_supply,
.num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc2_supply),
.consumer_supplies = omap3evm_vmmc2_supply,
};
static struct fixed_voltage_config omap3evm_vwlan = {
......@@ -548,17 +493,9 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
#endif
static struct twl4030_platform_data omap3evm_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.keypad = &omap3evm_kp_data,
.madc = &omap3evm_madc_data,
.usb = &omap3evm_usb_data,
.gpio = &omap3evm_gpio_data,
.codec = &omap3evm_codec_data,
.vdac = &omap3_evm_vdac,
.vpll2 = &omap3_evm_vpll2,
.vio = &omap3evm_vio,
.vmmc1 = &omap3evm_vmmc1,
.vsim = &omap3evm_vsim,
......@@ -566,6 +503,14 @@ static struct twl4030_platform_data omap3evm_twldata = {
static int __init omap3_evm_i2c_init(void)
{
omap3_pmic_get_config(&omap3evm_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
omap3evm_twldata.vdac->constraints.apply_uV = true;
omap3evm_twldata.vpll2->constraints.apply_uV = true;
omap3_pmic_init("twl4030", &omap3evm_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
......@@ -740,7 +685,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3_evm_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap3_evm_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap3logic.c
View file @ c8458413
......@@ -35,7 +35,6 @@
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
#include "control.h"
#include "common-board-devices.h"
......@@ -55,8 +54,8 @@
#define OMAP3_TORPEDO_MMC_GPIO_CD 127
#define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ 129
static struct regulator_consumer_supply omap3logic_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply omap3logic_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
......@@ -71,8 +70,8 @@ static struct regulator_init_data omap3logic_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3logic_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(omap3logic_vmmc1_supply),
.consumer_supplies = omap3logic_vmmc1_supply,
};
static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
......@@ -130,8 +129,6 @@ static void __init board_mmc_init(void)
}
omap2_hsmmc_init(board_mmc_info);
/* link regulators to MMC adapters */
omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev;
}
static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {
......@@ -215,16 +212,16 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
.boot_params = 0x80000100,
.map_io = omap3_map_io,
.init_early = omap3logic_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
.boot_params = 0x80000100,
.map_io = omap3_map_io,
.init_early = omap3logic_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap3logic_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap3pandora.c
View file @ c8458413
......@@ -84,7 +84,8 @@ static struct mtd_partition omap3pandora_nand_partitions[] = {
static struct omap_nand_platform_data pandora_nand_data = {
.cs = 0,
.devsize = 1, /* '0' for 8-bit, '1' for 16-bit device */
.devsize = NAND_BUSWIDTH_16,
.xfer_type = NAND_OMAP_PREFETCH_DMA,
.parts = omap3pandora_nand_partitions,
.nr_parts = ARRAY_SIZE(omap3pandora_nand_partitions),
};
......@@ -319,17 +320,17 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
.setup = omap3pandora_twl_gpio_setup,
};
static struct regulator_consumer_supply pandora_vmmc1_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
static struct regulator_consumer_supply pandora_vmmc2_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
static struct regulator_consumer_supply pandora_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply pandora_vmmc3_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2");
static struct regulator_consumer_supply pandora_vmmc2_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1")
};
static struct regulator_consumer_supply pandora_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
};
static struct regulator_consumer_supply pandora_vdds_supplies[] = {
REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
......@@ -337,11 +338,13 @@ static struct regulator_consumer_supply pandora_vdds_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_consumer_supply pandora_vcc_lcd_supply =
REGULATOR_SUPPLY("vcc", "display0");
static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
REGULATOR_SUPPLY("vcc", "display0"),
};
static struct regulator_consumer_supply pandora_usb_phy_supply =
REGULATOR_SUPPLY("hsusb0", "ehci-omap.0");
static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"),
};
/* ads7846 on SPI and 2 nub controllers on I2C */
static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
......@@ -350,8 +353,9 @@ static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
REGULATOR_SUPPLY("vcc", "3-0067"),
};
static struct regulator_consumer_supply pandora_adac_supply =
REGULATOR_SUPPLY("vcc", "soc-audio");
static struct regulator_consumer_supply pandora_adac_supply[] = {
REGULATOR_SUPPLY("vcc", "soc-audio"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data pandora_vmmc1 = {
......@@ -364,8 +368,8 @@ static struct regulator_init_data pandora_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &pandora_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(pandora_vmmc1_supply),
.consumer_supplies = pandora_vmmc1_supply,
};
/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
......@@ -379,38 +383,8 @@ static struct regulator_init_data pandora_vmmc2 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &pandora_vmmc2_supply,
};
/* VDAC for DSS driving S-Video */
static struct regulator_init_data pandora_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &pandora_vdda_dac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data pandora_vpll2 = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(pandora_vdds_supplies),
.consumer_supplies = pandora_vdds_supplies,
.num_consumer_supplies = ARRAY_SIZE(pandora_vmmc2_supply),
.consumer_supplies = pandora_vmmc2_supply,
};
/* VAUX1 for LCD */
......@@ -424,8 +398,8 @@ static struct regulator_init_data pandora_vaux1 = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &pandora_vcc_lcd_supply,
.num_consumer_supplies = ARRAY_SIZE(pandora_vcc_lcd_supply),
.consumer_supplies = pandora_vcc_lcd_supply,
};
/* VAUX2 for USB host PHY */
......@@ -439,8 +413,8 @@ static struct regulator_init_data pandora_vaux2 = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &pandora_usb_phy_supply,
.num_consumer_supplies = ARRAY_SIZE(pandora_usb_phy_supply),
.consumer_supplies = pandora_usb_phy_supply,
};
/* VAUX4 for ads7846 and nubs */
......@@ -469,8 +443,8 @@ static struct regulator_init_data pandora_vsim = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &pandora_adac_supply,
.num_consumer_supplies = ARRAY_SIZE(pandora_adac_supply),
.consumer_supplies = pandora_adac_supply,
};
/* Fixed regulator internal to Wifi module */
......@@ -478,8 +452,8 @@ static struct regulator_init_data pandora_vmmc3 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &pandora_vmmc3_supply,
.num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply),
.consumer_supplies = pandora_vmmc3_supply,
};
static struct fixed_voltage_config pandora_vwlan = {
......@@ -500,29 +474,12 @@ static struct platform_device pandora_vwlan_device = {
},
};
static struct twl4030_usb_data omap3pandora_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_codec_audio_data omap3pandora_audio_data;
static struct twl4030_codec_data omap3pandora_codec_data = {
.audio_mclk = 26000000,
.audio = &omap3pandora_audio_data,
};
static struct twl4030_bci_platform_data pandora_bci_data;
static struct twl4030_platform_data omap3pandora_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &omap3pandora_gpio_data,
.usb = &omap3pandora_usb_data,
.codec = &omap3pandora_codec_data,
.vmmc1 = &pandora_vmmc1,
.vmmc2 = &pandora_vmmc2,
.vdac = &pandora_vdac,
.vpll2 = &pandora_vpll2,
.vaux1 = &pandora_vaux1,
.vaux2 = &pandora_vaux2,
.vaux4 = &pandora_vaux4,
......@@ -540,6 +497,17 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = {
static int __init omap3pandora_i2c_init(void)
{
omap3_pmic_get_config(&omap3pandora_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
omap3pandora_twldata.vdac->constraints.apply_uV = true;
omap3pandora_twldata.vpll2->constraints.apply_uV = true;
omap3pandora_twldata.vpll2->num_consumer_supplies =
ARRAY_SIZE(pandora_vdds_supplies);
omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies;
omap3_pmic_init("tps65950", &omap3pandora_twldata);
/* i2c2 pins are not connected */
omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo,
......@@ -642,7 +610,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3pandora_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap3pandora_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap3stalker.c
View file @ c8458413
......@@ -52,7 +52,6 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
#include "common-board-devices.h"
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
......@@ -206,12 +205,12 @@ static struct omap_dss_board_info omap3_stalker_dss_data = {
.default_device = &omap3_stalker_dvi_device,
};
static struct regulator_consumer_supply omap3stalker_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply omap3stalker_vsim_supply = {
.supply = "vmmc_aux",
static struct regulator_consumer_supply omap3stalker_vsim_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
......@@ -224,8 +223,8 @@ static struct regulator_init_data omap3stalker_vmmc1 = {
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3stalker_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(omap3stalker_vmmc1_supply),
.consumer_supplies = omap3stalker_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
......@@ -238,8 +237,8 @@ static struct regulator_init_data omap3stalker_vsim = {
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3stalker_vsim_supply,
.num_consumer_supplies = ARRAY_SIZE(omap3stalker_vsim_supply),
.consumer_supplies = omap3stalker_vsim_supply,
};
static struct omap2_hsmmc_info mmc[] = {
......@@ -321,10 +320,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
omap3stalker_vmmc1_supply.dev = mmc[0].dev;
omap3stalker_vsim_supply.dev = mmc[0].dev;
/*
* Most GPIOs are for USB OTG. Some are mostly sent to
* the P2 connector; notably LEDA for the LCD backlight.
......@@ -354,10 +349,6 @@ static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
.setup = omap3stalker_twl_gpio_setup,
};
static struct twl4030_usb_data omap3stalker_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static uint32_t board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_DOWN),
......@@ -392,68 +383,10 @@ static struct twl4030_keypad_data omap3stalker_kp_data = {
.rep = 1,
};
static struct twl4030_madc_platform_data omap3stalker_madc_data = {
.irq_line = 1,
};
static struct twl4030_codec_audio_data omap3stalker_audio_data;
static struct twl4030_codec_data omap3stalker_codec_data = {
.audio_mclk = 26000000,
.audio = &omap3stalker_audio_data,
};
static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
/* VDAC for DSS driving S-Video */
static struct regulator_init_data omap3_stalker_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap3_stalker_vdda_dac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_init_data omap3_stalker_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vpll2_supplies),
.consumer_supplies = omap3_stalker_vpll2_supplies,
};
static struct twl4030_platform_data omap3stalker_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.keypad = &omap3stalker_kp_data,
.madc = &omap3stalker_madc_data,
.usb = &omap3stalker_usb_data,
.gpio = &omap3stalker_gpio_data,
.codec = &omap3stalker_codec_data,
.vdac = &omap3_stalker_vdac,
.vpll2 = &omap3_stalker_vpll2,
.vmmc1 = &omap3stalker_vmmc1,
.vsim = &omap3stalker_vsim,
};
......@@ -474,6 +407,15 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = {
static int __init omap3_stalker_i2c_init(void)
{
omap3_pmic_get_config(&omap3stalker_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC |
TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
omap3stalker_twldata.vdac->constraints.apply_uV = true;
omap3stalker_twldata.vpll2->constraints.apply_uV = true;
omap3stalker_twldata.vpll2->constraints.name = "VDVI";
omap3_pmic_init("twl4030", &omap3stalker_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3,
......@@ -494,10 +436,7 @@ static void __init omap3_stalker_init_early(void)
static void __init omap3_stalker_init_irq(void)
{
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap3_init_irq();
}
static struct platform_device *omap3_stalker_devices[] __initdata = {
......@@ -560,5 +499,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
.init_early = omap3_stalker_init_early,
.init_irq = omap3_stalker_init_irq,
.init_machine = omap3_stalker_init,
.timer = &omap_timer,
.timer = &omap3_secure_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap3touchbook.c
View file @ c8458413
......@@ -51,7 +51,6 @@
#include "mux.h"
#include "hsmmc.h"
#include "timer-gp.h"
#include "common-board-devices.h"
#include <asm/setup.h>
......@@ -114,12 +113,12 @@ static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct regulator_consumer_supply touchbook_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply touchbook_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply touchbook_vsim_supply = {
.supply = "vmmc_aux",
static struct regulator_consumer_supply touchbook_vsim_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
static struct gpio_led gpio_leds[];
......@@ -137,10 +136,6 @@ static int touchbook_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
touchbook_vmmc1_supply.dev = mmc[0].dev;
touchbook_vsim_supply.dev = mmc[0].dev;
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
......@@ -167,14 +162,18 @@ static struct twl4030_gpio_platform_data touchbook_gpio_data = {
.setup = touchbook_twl_gpio_setup,
};
static struct regulator_consumer_supply touchbook_vdac_supply = {
static struct regulator_consumer_supply touchbook_vdac_supply[] = {
{
.supply = "vdac",
.dev = &omap3_touchbook_lcd_device.dev,
},
};
static struct regulator_consumer_supply touchbook_vdvi_supply = {
static struct regulator_consumer_supply touchbook_vdvi_supply[] = {
{
.supply = "vdvi",
.dev = &omap3_touchbook_lcd_device.dev,
},
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
......@@ -188,8 +187,8 @@ static struct regulator_init_data touchbook_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &touchbook_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(touchbook_vmmc1_supply),
.consumer_supplies = touchbook_vmmc1_supply,
};
/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
......@@ -203,62 +202,15 @@ static struct regulator_init_data touchbook_vsim = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &touchbook_vsim_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data touchbook_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &touchbook_vdac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data touchbook_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &touchbook_vdvi_supply,
};
static struct twl4030_usb_data touchbook_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_codec_audio_data touchbook_audio_data;
static struct twl4030_codec_data touchbook_codec_data = {
.audio_mclk = 26000000,
.audio = &touchbook_audio_data,
.num_consumer_supplies = ARRAY_SIZE(touchbook_vsim_supply),
.consumer_supplies = touchbook_vsim_supply,
};
static struct twl4030_platform_data touchbook_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &touchbook_usb_data,
.gpio = &touchbook_gpio_data,
.codec = &touchbook_codec_data,
.vmmc1 = &touchbook_vmmc1,
.vsim = &touchbook_vsim,
.vdac = &touchbook_vdac,
.vpll2 = &touchbook_vpll2,
};
static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
......@@ -270,8 +222,20 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
static int __init omap3_touchbook_i2c_init(void)
{
/* Standard TouchBook bus */
omap3_pmic_init("twl4030", &touchbook_twldata);
omap3_pmic_get_config(&touchbook_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
touchbook_twldata.vdac->num_consumer_supplies =
ARRAY_SIZE(touchbook_vdac_supply);
touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply;
touchbook_twldata.vpll2->constraints.name = "VDVI";
touchbook_twldata.vpll2->num_consumer_supplies =
ARRAY_SIZE(touchbook_vdvi_supply);
touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply;
omap3_pmic_init("twl4030", &touchbook_twldata);
/* Additional TouchBook bus */
omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
ARRAY_SIZE(touchBook_i2c_boardinfo));
......@@ -371,10 +335,7 @@ static void __init omap3_touchbook_init_early(void)
static void __init omap3_touchbook_init_irq(void)
{
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
#endif
omap3_init_irq();
}
static struct platform_device *omap3_touchbook_devices[] __initdata = {
......@@ -449,5 +410,5 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
.init_early = omap3_touchbook_init_early,
.init_irq = omap3_touchbook_init_irq,
.init_machine = omap3_touchbook_init,
.timer = &omap_timer,
.timer = &omap3_secure_timer,
MACHINE_END
arch/arm/mach-omap2/board-omap4panda.c
View file @ c8458413
......@@ -41,7 +41,6 @@
#include <plat/usb.h>
#include <plat/mmc.h>
#include <video/omap-panel-generic-dpi.h>
#include "timer-gp.h"
#include "hsmmc.h"
#include "control.h"
......@@ -155,14 +154,6 @@ static struct omap_musb_board_data musb_board_data = {
.power = 100,
};
static struct twl4030_usb_data omap4_usbphy_data = {
.phy_init = omap4430_phy_init,
.phy_exit = omap4430_phy_exit,
.phy_power = omap4430_phy_power,
.phy_set_clock = omap4430_phy_set_clk,
.phy_suspend = omap4430_phy_suspend,
};
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
......@@ -182,24 +173,16 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = {
{
.supply = "vmmc",
.dev_name = "omap_hsmmc.0",
},
};
static struct regulator_consumer_supply omap4_panda_vmmc5_supply = {
.supply = "vmmc",
.dev_name = "omap_hsmmc.4",
static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
};
static struct regulator_init_data panda_vmmc5 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap4_panda_vmmc5_supply,
.num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply),
.consumer_supplies = omap4_panda_vmmc5_supply,
};
static struct fixed_voltage_config panda_vwlan = {
......@@ -274,128 +257,8 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
return 0;
}
static struct regulator_init_data omap4_panda_vaux2 = {
.constraints = {
.min_uV = 1200000,
.max_uV = 2800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vaux3 = {
.constraints = {
.min_uV = 1000000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
/* VMMC1 for MMC1 card */
static struct regulator_init_data omap4_panda_vmmc = {
.constraints = {
.min_uV = 1200000,
.max_uV = 3000000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = omap4_panda_vmmc_supply,
};
static struct regulator_init_data omap4_panda_vpp = {
.constraints = {
.min_uV = 1800000,
.max_uV = 2500000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vana = {
.constraints = {
.min_uV = 2100000,
.max_uV = 2100000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vcxio = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_vusb = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
};
static struct regulator_init_data omap4_panda_clk32kg = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
};
static struct twl4030_platform_data omap4_panda_twldata = {
.irq_base = TWL6030_IRQ_BASE,
.irq_end = TWL6030_IRQ_END,
/* Regulators */
.vmmc = &omap4_panda_vmmc,
.vpp = &omap4_panda_vpp,
.vana = &omap4_panda_vana,
.vcxio = &omap4_panda_vcxio,
.vdac = &omap4_panda_vdac,
.vusb = &omap4_panda_vusb,
.vaux2 = &omap4_panda_vaux2,
.vaux3 = &omap4_panda_vaux3,
.clk32kg = &omap4_panda_clk32kg,
.usb = &omap4_usbphy_data,
};
/* Panda board uses the common PMIC configuration */
static struct twl4030_platform_data omap4_panda_twldata;
/*
* Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
......@@ -409,6 +272,16 @@ static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
static int __init omap4_panda_i2c_init(void)
{
omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
TWL_COMMON_REGULATOR_VDAC |
TWL_COMMON_REGULATOR_VAUX2 |
TWL_COMMON_REGULATOR_VAUX3 |
TWL_COMMON_REGULATOR_VMMC |
TWL_COMMON_REGULATOR_VPP |
TWL_COMMON_REGULATOR_VANA |
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
TWL_COMMON_REGULATOR_CLK32KG);
omap4_pmic_init("twl6030", &omap4_panda_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
/*
......@@ -716,5 +589,5 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
.init_early = omap4_panda_init_early,
.init_irq = gic_init_irq,
.init_machine = omap4_panda_init,
.timer = &omap_timer,
.timer = &omap4_timer,
MACHINE_END
arch/arm/mach-omap2/board-overo.c
View file @ c8458413
......@@ -74,15 +74,16 @@
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
/* fixed regulator for ads7846 */
static struct regulator_consumer_supply ads7846_supply =
REGULATOR_SUPPLY("vcc", "spi1.0");
static struct regulator_consumer_supply ads7846_supply[] = {
REGULATOR_SUPPLY("vcc", "spi1.0"),
};
static struct regulator_init_data vads7846_regulator = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &ads7846_supply,
.num_consumer_supplies = ARRAY_SIZE(ads7846_supply),
.consumer_supplies = ads7846_supply,
};
static struct fixed_voltage_config vads7846 = {
......@@ -264,14 +265,6 @@ static struct omap_dss_board_info overo_dss_data = {
.default_device = &overo_dvi_device,
};
static struct regulator_consumer_supply overo_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
static struct regulator_consumer_supply overo_vdds_dsi_supply[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct mtd_partition overo_nand_partitions[] = {
{
.name = "xloader",
......@@ -319,8 +312,8 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
static struct regulator_consumer_supply overo_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply overo_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
......@@ -415,8 +408,6 @@ static int overo_twl_gpio_setup(struct device *dev,
{
omap2_hsmmc_init(mmc);
overo_vmmc1_supply.dev = mmc[0].dev;
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
......@@ -433,10 +424,6 @@ static struct twl4030_gpio_platform_data overo_gpio_data = {
.setup = overo_twl_gpio_setup,
};
static struct twl4030_usb_data overo_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct regulator_init_data overo_vmmc1 = {
.constraints = {
.min_uV = 1850000,
......@@ -447,59 +434,23 @@ static struct regulator_init_data overo_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &overo_vmmc1_supply,
};
/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
static struct regulator_init_data overo_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &overo_vdda_dac_supply,
};
/* VPLL2 for digital video outputs */
static struct regulator_init_data overo_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(overo_vdds_dsi_supply),
.consumer_supplies = overo_vdds_dsi_supply,
};
static struct twl4030_codec_audio_data overo_audio_data;
static struct twl4030_codec_data overo_codec_data = {
.audio_mclk = 26000000,
.audio = &overo_audio_data,
.num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply),
.consumer_supplies = overo_vmmc1_supply,
};
static struct twl4030_platform_data overo_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &overo_gpio_data,
.usb = &overo_usb_data,
.codec = &overo_codec_data,
.vmmc1 = &overo_vmmc1,
.vdac = &overo_vdac,
.vpll2 = &overo_vpll2,
};
static int __init overo_i2c_init(void)
{
omap3_pmic_get_config(&overo_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
overo_twldata.vpll2->constraints.name = "VDVI";
omap3_pmic_init("tps65950", &overo_twldata);
/* i2c2 pins are used for gpio */
omap_register_i2c_bus(3, 400, NULL, 0);
......@@ -615,7 +566,7 @@ MACHINE_START(OVERO, "Gumstix Overo")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = overo_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = overo_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-rm680.c
View file @ c8458413
......@@ -79,20 +79,14 @@ static struct twl4030_gpio_platform_data rm680_gpio_data = {
.pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15),
};
static struct twl4030_usb_data rm680_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_platform_data rm680_twl_data = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &rm680_gpio_data,
.usb = &rm680_usb_data,
/* add rest of the children here */
};
static void __init rm680_i2c_init(void)
{
omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0);
omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
......@@ -163,7 +157,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
.reserve = omap_reserve,
.map_io = rm680_map_io,
.init_early = rm680_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = rm680_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-rx51-peripherals.c
View file @ c8458413
......@@ -288,10 +288,6 @@ static struct twl4030_keypad_data rx51_kp_data = {
.rep = 1,
};
static struct twl4030_madc_platform_data rx51_madc_data = {
.irq_line = 1,
};
/* Enable input logic and pull all lines up when eMMC is on. */
static struct omap_board_mux rx51_mmc2_on_mux[] = {
OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
......@@ -358,14 +354,17 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
{} /* Terminator */
};
static struct regulator_consumer_supply rx51_vmmc1_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0");
static struct regulator_consumer_supply rx51_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply rx51_vaux3_supply =
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
static struct regulator_consumer_supply rx51_vaux3_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
static struct regulator_consumer_supply rx51_vsim_supply =
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1");
static struct regulator_consumer_supply rx51_vsim_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"),
};
static struct regulator_consumer_supply rx51_vmmc2_supplies[] = {
/* tlv320aic3x analog supplies */
......@@ -395,10 +394,6 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = {
REGULATOR_SUPPLY("vdd", "2-0063"),
};
static struct regulator_consumer_supply rx51_vdac_supply[] = {
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"),
};
static struct regulator_init_data rx51_vaux1 = {
.constraints = {
.name = "V28",
......@@ -452,8 +447,8 @@ static struct regulator_init_data rx51_vaux3_mmc = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &rx51_vaux3_supply,
.num_consumer_supplies = ARRAY_SIZE(rx51_vaux3_supply),
.consumer_supplies = rx51_vaux3_supply,
};
static struct regulator_init_data rx51_vaux4 = {
......@@ -479,8 +474,8 @@ static struct regulator_init_data rx51_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &rx51_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(rx51_vmmc1_supply),
.consumer_supplies = rx51_vmmc1_supply,
};
static struct regulator_init_data rx51_vmmc2 = {
......@@ -511,23 +506,8 @@ static struct regulator_init_data rx51_vsim = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &rx51_vsim_supply,
};
static struct regulator_init_data rx51_vdac = {
.constraints = {
.name = "VDAC",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = rx51_vdac_supply,
.num_consumer_supplies = ARRAY_SIZE(rx51_vsim_supply),
.consumer_supplies = rx51_vsim_supply,
};
static struct regulator_init_data rx51_vio = {
......@@ -600,10 +580,6 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
.setup = rx51_twlgpio_setup,
};
static struct twl4030_usb_data rx51_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_ins sleep_on_seq[] __initdata = {
/*
* Turn off everything
......@@ -775,14 +751,9 @@ struct twl4030_codec_data rx51_codec_data __initdata = {
};
static struct twl4030_platform_data rx51_twldata __initdata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.gpio = &rx51_gpio_data,
.keypad = &rx51_kp_data,
.madc = &rx51_madc_data,
.usb = &rx51_usb_data,
.power = &rx51_t2scripts_data,
.codec = &rx51_codec_data,
......@@ -791,7 +762,6 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
.vsim = &rx51_vsim,
.vdac = &rx51_vdac,
.vio = &rx51_vio,
};
......@@ -847,6 +817,13 @@ static int __init rx51_i2c_init(void)
rx51_twldata.vaux3 = &rx51_vaux3_cam;
}
rx51_twldata.vmmc2 = &rx51_vmmc2;
omap3_pmic_get_config(&rx51_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC,
TWL_COMMON_REGULATOR_VDAC);
rx51_twldata.vdac->constraints.apply_uV = true;
rx51_twldata.vdac->constraints.name = "VDAC";
omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
......
arch/arm/mach-omap2/board-rx51.c
View file @ c8458413
......@@ -160,7 +160,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
.reserve = rx51_reserve,
.map_io = rx51_map_io,
.init_early = rx51_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = rx51_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/board-ti8168evm.c
View file @ c8458413
......@@ -33,11 +33,6 @@ static void __init ti8168_init_early(void)
omap2_init_common_devices(NULL, NULL);
}
static void __init ti8168_evm_init_irq(void)
{
omap_init_irq();
}
static void __init ti8168_evm_init(void)
{
omap_serial_init();
......@@ -56,7 +51,7 @@ MACHINE_START(TI8168EVM, "ti8168evm")
.boot_params = 0x80000100,
.map_io = ti8168_evm_map_io,
.init_early = ti8168_init_early,
.init_irq = ti8168_evm_init_irq,
.timer = &omap_timer,
.init_irq = ti816x_init_irq,
.timer = &omap3_timer,
.init_machine = ti8168_evm_init,
MACHINE_END
arch/arm/mach-omap2/board-zoom-peripherals.c
View file @ c8458413
......@@ -105,21 +105,20 @@ static struct twl4030_keypad_data zoom_kp_twl4030_data = {
.rep = 1,
};
static struct regulator_consumer_supply zoom_vmmc1_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply zoom_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply zoom_vsim_supply = {
.supply = "vmmc_aux",
static struct regulator_consumer_supply zoom_vsim_supply[] = {
REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
};
static struct regulator_consumer_supply zoom_vmmc2_supply = {
.supply = "vmmc",
static struct regulator_consumer_supply zoom_vmmc2_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
static struct regulator_consumer_supply zoom_vmmc3_supply = {
.supply = "vmmc",
.dev_name = "omap_hsmmc.2",
static struct regulator_consumer_supply zoom_vmmc3_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
};
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
......@@ -133,8 +132,8 @@ static struct regulator_init_data zoom_vmmc1 = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom_vmmc1_supply,
.num_consumer_supplies = ARRAY_SIZE(zoom_vmmc1_supply),
.consumer_supplies = zoom_vmmc1_supply,
};
/* VMMC2 for MMC2 card */
......@@ -148,8 +147,8 @@ static struct regulator_init_data zoom_vmmc2 = {
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom_vmmc2_supply,
.num_consumer_supplies = ARRAY_SIZE(zoom_vmmc2_supply),
.consumer_supplies = zoom_vmmc2_supply,
};
/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
......@@ -163,16 +162,16 @@ static struct regulator_init_data zoom_vsim = {
| REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom_vsim_supply,
.num_consumer_supplies = ARRAY_SIZE(zoom_vsim_supply),
.consumer_supplies = zoom_vsim_supply,
};
static struct regulator_init_data zoom_vmmc3 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom_vmmc3_supply,
.num_consumer_supplies = ARRAY_SIZE(zoom_vmmc3_supply),
.consumer_supplies = zoom_vmmc3_supply,
};
static struct fixed_voltage_config zoom_vwlan = {
......@@ -227,40 +226,6 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
static struct regulator_consumer_supply zoom_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_consumer_supply zoom_vdda_dac_supply =
REGULATOR_SUPPLY("vdda_dac", "omapdss_venc");
static struct regulator_init_data zoom_vpll2 = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(zoom_vpll2_supplies),
.consumer_supplies = zoom_vpll2_supplies,
};
static struct regulator_init_data zoom_vdac = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &zoom_vdda_dac_supply,
};
static int zoom_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
......@@ -270,13 +235,6 @@ static int zoom_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
*/
zoom_vmmc1_supply.dev = mmc[0].dev;
zoom_vsim_supply.dev = mmc[0].dev;
zoom_vmmc2_supply.dev = mmc[1].dev;
ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
"lcd enable");
if (ret)
......@@ -292,26 +250,6 @@ static void zoom2_set_hs_extmute(int mute)
gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute);
}
static int zoom_batt_table[] = {
/* 0 C*/
30800, 29500, 28300, 27100,
26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310,
8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830,
5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170,
4040, 3910, 3790, 3670, 3550
};
static struct twl4030_bci_platform_data zoom_bci_data = {
.battery_tmp_tbl = zoom_batt_table,
.tblsize = ARRAY_SIZE(zoom_batt_table),
};
static struct twl4030_usb_data zoom_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_gpio_platform_data zoom_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
......@@ -319,41 +257,29 @@ static struct twl4030_gpio_platform_data zoom_gpio_data = {
.setup = zoom_twl_gpio_setup,
};
static struct twl4030_madc_platform_data zoom_madc_data = {
.irq_line = 1,
};
static struct twl4030_codec_audio_data zoom_audio_data;
static struct twl4030_codec_data zoom_codec_data = {
.audio_mclk = 26000000,
.audio = &zoom_audio_data,
};
static struct twl4030_platform_data zoom_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.bci = &zoom_bci_data,
.madc = &zoom_madc_data,
.usb = &zoom_usb_data,
.gpio = &zoom_gpio_data,
.keypad = &zoom_kp_twl4030_data,
.codec = &zoom_codec_data,
.vmmc1 = &zoom_vmmc1,
.vmmc2 = &zoom_vmmc2,
.vsim = &zoom_vsim,
.vpll2 = &zoom_vpll2,
.vdac = &zoom_vdac,
};
static int __init omap_i2c_init(void)
{
omap3_pmic_get_config(&zoom_twldata,
TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
if (machine_is_omap_zoom2()) {
zoom_audio_data.ramp_delay_value = 3; /* 161 ms */
zoom_audio_data.hs_extmute = 1;
zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute;
struct twl4030_codec_audio_data *audio_data;
audio_data = zoom_twldata.codec->audio;
audio_data->ramp_delay_value = 3; /* 161 ms */
audio_data->hs_extmute = 1;
audio_data->set_hs_extmute = zoom2_set_hs_extmute;
}
omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata);
omap_register_i2c_bus(2, 400, NULL, 0);
......
arch/arm/mach-omap2/board-zoom.c
View file @ c8458413
......@@ -137,9 +137,9 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_zoom_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
......@@ -147,7 +147,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_zoom_init_early,
.init_irq = omap_init_irq,
.init_irq = omap3_init_irq,
.init_machine = omap_zoom_init,
.timer = &omap_timer,
.timer = &omap3_timer,
MACHINE_END
arch/arm/mach-omap2/clock44xx.h
View file @ c8458413
......@@ -8,13 +8,6 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
/*
* XXX Missing values for the OMAP4 DPLL_USB
* XXX Missing min_multiplier values for all OMAP4 DPLLs
*/
#define OMAP4430_MAX_DPLL_MULT 2047
#define OMAP4430_MAX_DPLL_DIV 128
int omap4xxx_clk_init(void);
#endif
arch/arm/mach-omap2/clock44xx_data.c
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/clockdomains44xx_data.c
View file @ c8458413
/*
* OMAP4 Clock domains framework
*
* Copyright (C) 2009 Texas Instruments, Inc.
* Copyright (C) 2009 Nokia Corporation
* Copyright (C) 2009-2011 Texas Instruments, Inc.
* Copyright (C) 2009-2011 Nokia Corporation
*
* Abhijit Pagare (abhijitpagare@ti.com)
* Benoit Cousson (b-cousson@ti.com)
* Paul Walmsley (paul@pwsan.com)
*
* This file is automatically generated from the OMAP hardware databases.
* We respectfully ask that any modifications to this file be coordinated
......@@ -32,7 +33,7 @@
/* Static Dependencies for OMAP4 Clock Domains */
static struct clkdm_dep ducati_wkup_sleep_deps[] = {
static struct clkdm_dep d2d_wkup_sleep_deps[] = {
{
.clkdm_name = "abe_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
......@@ -50,103 +51,103 @@ static struct clkdm_dep ducati_wkup_sleep_deps[] = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "l3_dss_clkdm",
.clkdm_name = "l3_emif_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "l3_emif_clkdm",
.clkdm_name = "l3_init_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "l3_gfx_clkdm",
.clkdm_name = "l4_cfg_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "l3_init_clkdm",
.clkdm_name = "l4_per_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{ NULL },
};
static struct clkdm_dep ducati_wkup_sleep_deps[] = {
{
.clkdm_name = "l4_cfg_clkdm",
.clkdm_name = "abe_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "l4_per_clkdm",
.clkdm_name = "ivahd_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "l4_secure_clkdm",
.clkdm_name = "l3_1_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "l4_wkup_clkdm",
.clkdm_name = "l3_2_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "tesla_clkdm",
.clkdm_name = "l3_dss_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{ NULL },
};
static struct clkdm_dep iss_wkup_sleep_deps[] = {
{
.clkdm_name = "ivahd_clkdm",
.clkdm_name = "l3_emif_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "l3_1_clkdm",
.clkdm_name = "l3_gfx_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "l3_emif_clkdm",
.clkdm_name = "l3_init_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{ NULL },
};
static struct clkdm_dep ivahd_wkup_sleep_deps[] = {
{
.clkdm_name = "l3_1_clkdm",
.clkdm_name = "l4_cfg_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "l3_emif_clkdm",
.clkdm_name = "l4_per_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{ NULL },
};
static struct clkdm_dep l3_d2d_wkup_sleep_deps[] = {
{
.clkdm_name = "abe_clkdm",
.clkdm_name = "l4_secure_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "ivahd_clkdm",
.clkdm_name = "l4_wkup_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "l3_1_clkdm",
.clkdm_name = "tesla_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{ NULL },
};
static struct clkdm_dep iss_wkup_sleep_deps[] = {
{
.clkdm_name = "l3_2_clkdm",
.clkdm_name = "ivahd_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "l3_emif_clkdm",
.clkdm_name = "l3_1_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "l3_init_clkdm",
.clkdm_name = "l3_emif_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{ NULL },
};
static struct clkdm_dep ivahd_wkup_sleep_deps[] = {
{
.clkdm_name = "l4_cfg_clkdm",
.clkdm_name = "l3_1_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{
.clkdm_name = "l4_per_clkdm",
.clkdm_name = "l3_emif_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
},
{ NULL },
......@@ -280,7 +281,7 @@ static struct clkdm_dep l4_secure_wkup_sleep_deps[] = {
{ NULL },
};
static struct clkdm_dep mpuss_wkup_sleep_deps[] = {
static struct clkdm_dep mpu_wkup_sleep_deps[] = {
{
.clkdm_name = "abe_clkdm",
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430)
......@@ -497,14 +498,14 @@ static struct clockdomain l3_init_44xx_clkdm = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpuss_44xx_clkdm = {
.name = "mpuss_clkdm",
.pwrdm = { .name = "mpu_pwrdm" },
.prcm_partition = OMAP4430_CM1_PARTITION,
.cm_inst = OMAP4430_CM1_MPU_INST,
.clkdm_offs = OMAP4430_CM1_MPU_MPU_CDOFFS,
.wkdep_srcs = mpuss_wkup_sleep_deps,
.sleepdep_srcs = mpuss_wkup_sleep_deps,
static struct clockdomain d2d_44xx_clkdm = {
.name = "d2d_clkdm",
.pwrdm = { .name = "core_pwrdm" },
.prcm_partition = OMAP4430_CM2_PARTITION,
.cm_inst = OMAP4430_CM2_CORE_INST,
.clkdm_offs = OMAP4430_CM2_CORE_D2D_CDOFFS,
.wkdep_srcs = d2d_wkup_sleep_deps,
.sleepdep_srcs = d2d_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
......@@ -563,6 +564,18 @@ static struct clockdomain ducati_44xx_clkdm = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain mpu_44xx_clkdm = {
.name = "mpu_clkdm",
.pwrdm = { .name = "mpu_pwrdm" },
.prcm_partition = OMAP4430_CM1_PARTITION,
.cm_inst = OMAP4430_CM1_MPU_INST,
.clkdm_offs = OMAP4430_CM1_MPU_MPU_CDOFFS,
.wkdep_srcs = mpu_wkup_sleep_deps,
.sleepdep_srcs = mpu_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_2_44xx_clkdm = {
.name = "l3_2_clkdm",
.pwrdm = { .name = "core_pwrdm" },
......@@ -585,18 +598,6 @@ static struct clockdomain l3_1_44xx_clkdm = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain l3_d2d_44xx_clkdm = {
.name = "l3_d2d_clkdm",
.pwrdm = { .name = "core_pwrdm" },
.prcm_partition = OMAP4430_CM2_PARTITION,
.cm_inst = OMAP4430_CM2_CORE_INST,
.clkdm_offs = OMAP4430_CM2_CORE_D2D_CDOFFS,
.wkdep_srcs = l3_d2d_wkup_sleep_deps,
.sleepdep_srcs = l3_d2d_wkup_sleep_deps,
.flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
static struct clockdomain iss_44xx_clkdm = {
.name = "iss_clkdm",
.pwrdm = { .name = "cam_pwrdm" },
......@@ -655,6 +656,7 @@ static struct clockdomain l3_dma_44xx_clkdm = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
};
/* As clockdomains are added or removed above, this list must also be changed */
static struct clockdomain *clockdomains_omap44xx[] __initdata = {
&l4_cefuse_44xx_clkdm,
&l4_cfg_44xx_clkdm,
......@@ -666,21 +668,21 @@ static struct clockdomain *clockdomains_omap44xx[] __initdata = {
&abe_44xx_clkdm,
&l3_instr_44xx_clkdm,
&l3_init_44xx_clkdm,
&mpuss_44xx_clkdm,
&d2d_44xx_clkdm,
&mpu0_44xx_clkdm,
&mpu1_44xx_clkdm,
&l3_emif_44xx_clkdm,
&l4_ao_44xx_clkdm,
&ducati_44xx_clkdm,
&mpu_44xx_clkdm,
&l3_2_44xx_clkdm,
&l3_1_44xx_clkdm,
&l3_d2d_44xx_clkdm,
&iss_44xx_clkdm,
&l3_dss_44xx_clkdm,
&l4_wkup_44xx_clkdm,
&emu_sys_44xx_clkdm,
&l3_dma_44xx_clkdm,
NULL,
NULL
};
void __init omap44xx_clockdomains_init(void)
......
arch/arm/mach-omap2/cm-regbits-44xx.h
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/cm1_44xx.h
View file @ c8458413
/*
* OMAP44xx CM1 instance offset macros
*
* Copyright (C) 2009-2010 Texas Instruments, Inc.
* Copyright (C) 2009-2011 Texas Instruments, Inc.
* Copyright (C) 2009-2010 Nokia Corporation
*
* Paul Walmsley (paul@pwsan.com)
......@@ -41,9 +41,9 @@
#define OMAP4430_CM1_INSTR_INST 0x0f00
/* CM1 clockdomain register offsets (from instance start) */
#define OMAP4430_CM1_ABE_ABE_CDOFFS 0x0000
#define OMAP4430_CM1_MPU_MPU_CDOFFS 0x0000
#define OMAP4430_CM1_TESLA_TESLA_CDOFFS 0x0000
#define OMAP4430_CM1_ABE_ABE_CDOFFS 0x0000
/* CM1 */
......@@ -82,8 +82,8 @@
#define OMAP4430_CM_DIV_M7_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0044)
#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET 0x0048
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0048)
#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_CORE_OFFSET 0x004c
#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x004c)
#define OMAP4_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET 0x004c
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x004c)
#define OMAP4_CM_EMU_OVERRIDE_DPLL_CORE_OFFSET 0x0050
#define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0050)
#define OMAP4_CM_CLKMODE_DPLL_MPU_OFFSET 0x0060
......@@ -98,8 +98,8 @@
#define OMAP4430_CM_DIV_M2_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0070)
#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET 0x0088
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0088)
#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_MPU_OFFSET 0x008c
#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x008c)
#define OMAP4_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET 0x008c
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x008c)
#define OMAP4_CM_BYPCLK_DPLL_MPU_OFFSET 0x009c
#define OMAP4430_CM_BYPCLK_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x009c)
#define OMAP4_CM_CLKMODE_DPLL_IVA_OFFSET 0x00a0
......@@ -116,8 +116,8 @@
#define OMAP4430_CM_DIV_M5_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00bc)
#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET 0x00c8
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00c8)
#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_IVA_OFFSET 0x00cc
#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00cc)
#define OMAP4_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET 0x00cc
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00cc)
#define OMAP4_CM_BYPCLK_DPLL_IVA_OFFSET 0x00dc
#define OMAP4430_CM_BYPCLK_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00dc)
#define OMAP4_CM_CLKMODE_DPLL_ABE_OFFSET 0x00e0
......@@ -134,8 +134,8 @@
#define OMAP4430_CM_DIV_M3_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00f4)
#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET 0x0108
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0108)
#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_ABE_OFFSET 0x010c
#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x010c)
#define OMAP4_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET 0x010c
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x010c)
#define OMAP4_CM_CLKMODE_DPLL_DDRPHY_OFFSET 0x0120
#define OMAP4430_CM_CLKMODE_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0120)
#define OMAP4_CM_IDLEST_DPLL_DDRPHY_OFFSET 0x0124
......@@ -154,8 +154,8 @@
#define OMAP4430_CM_DIV_M6_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0140)
#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_DDRPHY_OFFSET 0x0148
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0148)
#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_DDRPHY_OFFSET 0x014c
#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x014c)
#define OMAP4_CM_SSC_MODFREQDIV_DPLL_DDRPHY_OFFSET 0x014c
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x014c)
#define OMAP4_CM_SHADOW_FREQ_CONFIG1_OFFSET 0x0160
#define OMAP4430_CM_SHADOW_FREQ_CONFIG1 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0160)
#define OMAP4_CM_SHADOW_FREQ_CONFIG2_OFFSET 0x0164
......@@ -217,42 +217,6 @@
#define OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET 0x0088
#define OMAP4430_CM1_ABE_WDT3_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0088)
/* CM1.RESTORE_CM1 register offsets */
#define OMAP4_CM_CLKSEL_CORE_RESTORE_OFFSET 0x0000
#define OMAP4430_CM_CLKSEL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0000)
#define OMAP4_CM_DIV_M2_DPLL_CORE_RESTORE_OFFSET 0x0004
#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0004)
#define OMAP4_CM_DIV_M3_DPLL_CORE_RESTORE_OFFSET 0x0008
#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0008)
#define OMAP4_CM_DIV_M4_DPLL_CORE_RESTORE_OFFSET 0x000c
#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x000c)
#define OMAP4_CM_DIV_M5_DPLL_CORE_RESTORE_OFFSET 0x0010
#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0010)
#define OMAP4_CM_DIV_M6_DPLL_CORE_RESTORE_OFFSET 0x0014
#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0014)
#define OMAP4_CM_DIV_M7_DPLL_CORE_RESTORE_OFFSET 0x0018
#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0018)
#define OMAP4_CM_CLKSEL_DPLL_CORE_RESTORE_OFFSET 0x001c
#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x001c)
#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE_OFFSET 0x0020
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0020)
#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_CORE_RESTORE_OFFSET 0x0024
#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0024)
#define OMAP4_CM_CLKMODE_DPLL_CORE_RESTORE_OFFSET 0x0028
#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0028)
#define OMAP4_CM_SHADOW_FREQ_CONFIG2_RESTORE_OFFSET 0x002c
#define OMAP4430_CM_SHADOW_FREQ_CONFIG2_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x002c)
#define OMAP4_CM_SHADOW_FREQ_CONFIG1_RESTORE_OFFSET 0x0030
#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0030)
#define OMAP4_CM_AUTOIDLE_DPLL_CORE_RESTORE_OFFSET 0x0034
#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0034)
#define OMAP4_CM_MPU_CLKSTCTRL_RESTORE_OFFSET 0x0038
#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0038)
#define OMAP4_CM_CM1_PROFILING_CLKCTRL_RESTORE_OFFSET 0x003c
#define OMAP4430_CM_CM1_PROFILING_CLKCTRL_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x003c)
#define OMAP4_CM_DYN_DEP_PRESCAL_RESTORE_OFFSET 0x0040
#define OMAP4430_CM_DYN_DEP_PRESCAL_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0040)
/* Function prototypes */
extern u32 omap4_cm1_read_inst_reg(s16 inst, u16 idx);
extern void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 idx);
......
arch/arm/mach-omap2/cm2_44xx.h
View file @ c8458413
/*
* OMAP44xx CM2 instance offset macros
*
* Copyright (C) 2009-2010 Texas Instruments, Inc.
* Copyright (C) 2009-2011 Texas Instruments, Inc.
* Copyright (C) 2009-2010 Nokia Corporation
*
* Paul Walmsley (paul@pwsan.com)
......@@ -65,7 +65,6 @@
#define OMAP4430_CM2_L4PER_L4SEC_CDOFFS 0x0180
#define OMAP4430_CM2_CEFUSE_CEFUSE_CDOFFS 0x0000
/* CM2 */
/* CM2.OCP_SOCKET_CM2 register offsets */
......@@ -121,8 +120,8 @@
#define OMAP4430_CM_DIV_M7_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0064)
#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET 0x0068
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0068)
#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_PER_OFFSET 0x006c
#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x006c)
#define OMAP4_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET 0x006c
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x006c)
#define OMAP4_CM_CLKMODE_DPLL_USB_OFFSET 0x0080
#define OMAP4430_CM_CLKMODE_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0080)
#define OMAP4_CM_IDLEST_DPLL_USB_OFFSET 0x0084
......@@ -135,8 +134,8 @@
#define OMAP4430_CM_DIV_M2_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0090)
#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET 0x00a8
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00a8)
#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_USB_OFFSET 0x00ac
#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ac)
#define OMAP4_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET 0x00ac
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ac)
#define OMAP4_CM_CLKDCOLDO_DPLL_USB_OFFSET 0x00b4
#define OMAP4430_CM_CLKDCOLDO_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00b4)
#define OMAP4_CM_CLKMODE_DPLL_UNIPRO_OFFSET 0x00c0
......@@ -151,8 +150,8 @@
#define OMAP4430_CM_DIV_M2_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00d0)
#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_UNIPRO_OFFSET 0x00e8
#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00e8)
#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_UNIPRO_OFFSET 0x00ec
#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ec)
#define OMAP4_CM_SSC_MODFREQDIV_DPLL_UNIPRO_OFFSET 0x00ec
#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ec)
/* CM2.ALWAYS_ON_CM2 register offsets */
#define OMAP4_CM_ALWON_CLKSTCTRL_OFFSET 0x0000
......@@ -227,8 +226,8 @@
#define OMAP4430_CM_D2D_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0508)
#define OMAP4_CM_D2D_SAD2D_CLKCTRL_OFFSET 0x0520
#define OMAP4430_CM_D2D_SAD2D_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0520)
#define OMAP4_CM_D2D_INSTEM_ICR_CLKCTRL_OFFSET 0x0528
#define OMAP4430_CM_D2D_INSTEM_ICR_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0528)
#define OMAP4_CM_D2D_MODEM_ICR_CLKCTRL_OFFSET 0x0528
#define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0528)
#define OMAP4_CM_D2D_SAD2D_FW_CLKCTRL_OFFSET 0x0530
#define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0530)
#define OMAP4_CM_L4CFG_CLKSTCTRL_OFFSET 0x0600
......@@ -450,56 +449,6 @@
#define OMAP4_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET 0x0020
#define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_INST, 0x0020)
/* CM2.RESTORE_CM2 register offsets */
#define OMAP4_CM_L3_1_CLKSTCTRL_RESTORE_OFFSET 0x0000
#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0000)
#define OMAP4_CM_L3_2_CLKSTCTRL_RESTORE_OFFSET 0x0004
#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0004)
#define OMAP4_CM_L4CFG_CLKSTCTRL_RESTORE_OFFSET 0x0008
#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0008)
#define OMAP4_CM_MEMIF_CLKSTCTRL_RESTORE_OFFSET 0x000c
#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x000c)
#define OMAP4_CM_L4PER_CLKSTCTRL_RESTORE_OFFSET 0x0010
#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0010)
#define OMAP4_CM_L3INIT_CLKSTCTRL_RESTORE_OFFSET 0x0014
#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0014)
#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_RESTORE_OFFSET 0x0018
#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0018)
#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE_OFFSET 0x001c
#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x001c)
#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE_OFFSET 0x0020
#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0020)
#define OMAP4_CM_CM2_PROFILING_CLKCTRL_RESTORE_OFFSET 0x0024
#define OMAP4430_CM_CM2_PROFILING_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0024)
#define OMAP4_CM_D2D_STATICDEP_RESTORE_OFFSET 0x0028
#define OMAP4430_CM_D2D_STATICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0028)
#define OMAP4_CM_L3_1_DYNAMICDEP_RESTORE_OFFSET 0x002c
#define OMAP4430_CM_L3_1_DYNAMICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x002c)
#define OMAP4_CM_L3_2_DYNAMICDEP_RESTORE_OFFSET 0x0030
#define OMAP4430_CM_L3_2_DYNAMICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0030)
#define OMAP4_CM_D2D_DYNAMICDEP_RESTORE_OFFSET 0x0034
#define OMAP4430_CM_D2D_DYNAMICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0034)
#define OMAP4_CM_L4CFG_DYNAMICDEP_RESTORE_OFFSET 0x0038
#define OMAP4430_CM_L4CFG_DYNAMICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0038)
#define OMAP4_CM_L4PER_DYNAMICDEP_RESTORE_OFFSET 0x003c
#define OMAP4430_CM_L4PER_DYNAMICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x003c)
#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_RESTORE_OFFSET 0x0040
#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0040)
#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_RESTORE_OFFSET 0x0044
#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0044)
#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_RESTORE_OFFSET 0x0048
#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0048)
#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_RESTORE_OFFSET 0x004c
#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x004c)
#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_RESTORE_OFFSET 0x0050
#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0050)
#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE_OFFSET 0x0054
#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0054)
#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE_OFFSET 0x0058
#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0058)
#define OMAP4_CM_SDMA_STATICDEP_RESTORE_OFFSET 0x005c
#define OMAP4430_CM_SDMA_STATICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x005c)
/* Function prototypes */
extern u32 omap4_cm2_read_inst_reg(s16 inst, u16 idx);
extern void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 idx);
......
arch/arm/mach-omap2/common-board-devices.c
View file @ c8458413
......@@ -20,36 +20,15 @@
*
*/
#include <linux/i2c.h>
#include <linux/i2c/twl.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <plat/i2c.h>
#include <plat/mcspi.h>
#include <plat/nand.h>
#include "common-board-devices.h"
static struct i2c_board_info __initdata pmic_i2c_board_info = {
.addr = 0x48,
.flags = I2C_CLIENT_WAKE,
};
void __init omap_pmic_init(int bus, u32 clkrate,
const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data)
{
strncpy(pmic_i2c_board_info.type, pmic_type,
sizeof(pmic_i2c_board_info.type));
pmic_i2c_board_info.irq = pmic_irq;
pmic_i2c_board_info.platform_data = pmic_data;
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
static struct omap2_mcspi_device_config ads7846_mcspi_config = {
......@@ -115,9 +94,7 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
#endif
#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
static struct omap_nand_platform_data nand_data = {
.dma_channel = -1, /* disable DMA in OMAP NAND driver */
};
static struct omap_nand_platform_data nand_data;
void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
int nr_parts)
......@@ -148,7 +125,7 @@ void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
nand_data.cs = nandcs;
nand_data.parts = parts;
nand_data.nr_parts = nr_parts;
nand_data.options = options;
nand_data.devsize = options;
printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
if (gpmc_nand_init(&nand_data) < 0)
......
arch/arm/mach-omap2/common-board-devices.h
View file @ c8458413
#ifndef __OMAP_COMMON_BOARD_DEVICES__
#define __OMAP_COMMON_BOARD_DEVICES__
#include "twl-common.h"
#define NAND_BLOCK_SIZE SZ_128K
struct twl4030_platform_data;
struct mtd_partition;
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data);
static inline void omap2_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data);
}
static inline void omap3_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
}
static inline void omap4_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
/* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
}
struct ads7846_platform_data;
void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
......
arch/arm/mach-omap2/gpmc-nand.c
View file @ c8458413
......@@ -20,8 +20,6 @@
#include <plat/board.h>
#include <plat/gpmc.h>
static struct omap_nand_platform_data *gpmc_nand_data;
static struct resource gpmc_nand_resource = {
.flags = IORESOURCE_MEM,
};
......@@ -33,7 +31,7 @@ static struct platform_device gpmc_nand_device = {
.resource = &gpmc_nand_resource,
};
static int omap2_nand_gpmc_retime(void)
static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
{
struct gpmc_timings t;
int err;
......@@ -83,13 +81,11 @@ static int omap2_nand_gpmc_retime(void)
return 0;
}
int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
{
int err = 0;
struct device *dev = &gpmc_nand_device.dev;
gpmc_nand_data = _nand_data;
gpmc_nand_data->nand_setup = omap2_nand_gpmc_retime;
gpmc_nand_device.dev.platform_data = gpmc_nand_data;
err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
......@@ -100,7 +96,7 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data)
}
/* Set timings in GPMC */
err = omap2_nand_gpmc_retime();
err = omap2_nand_gpmc_retime(gpmc_nand_data);
if (err < 0) {
dev_err(dev, "Unable to set gpmc timings: %d\n", err);
return err;
......
arch/arm/mach-omap2/i2c.c
View file @ c8458413
......@@ -21,9 +21,19 @@
#include <plat/cpu.h>
#include <plat/i2c.h>
#include <plat/common.h>
#include <plat/omap_hwmod.h>
#include "mux.h"
/* In register I2C_CON, Bit 15 is the I2C enable bit */
#define I2C_EN BIT(15)
#define OMAP2_I2C_CON_OFFSET 0x24
#define OMAP4_I2C_CON_OFFSET 0xA4
/* Maximum microseconds to wait for OMAP module to softreset */
#define MAX_MODULE_SOFTRESET_WAIT 10000
void __init omap2_i2c_mux_pins(int bus_id)
{
char mux_name[sizeof("i2c2_scl.i2c2_scl")];
......@@ -37,3 +47,61 @@ void __init omap2_i2c_mux_pins(int bus_id)
sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
}
/**
* omap_i2c_reset - reset the omap i2c module.
* @oh: struct omap_hwmod *
*
* The i2c moudle in omap2, omap3 had a special sequence to reset. The
* sequence is:
* - Disable the I2C.
* - Write to SOFTRESET bit.
* - Enable the I2C.
* - Poll on the RESETDONE bit.
* The sequence is implemented in below function. This is called for 2420,
* 2430 and omap3.
*/
int omap_i2c_reset(struct omap_hwmod *oh)
{
u32 v;
u16 i2c_con;
int c = 0;
if (oh->class->rev == OMAP_I2C_IP_VERSION_2) {
i2c_con = OMAP4_I2C_CON_OFFSET;
} else if (oh->class->rev == OMAP_I2C_IP_VERSION_1) {
i2c_con = OMAP2_I2C_CON_OFFSET;
} else {
WARN(1, "Cannot reset I2C block %s: unsupported revision\n",
oh->name);
return -EINVAL;
}
/* Disable I2C */
v = omap_hwmod_read(oh, i2c_con);
v &= ~I2C_EN;
omap_hwmod_write(v, oh, i2c_con);
/* Write to the SOFTRESET bit */
omap_hwmod_softreset(oh);
/* Enable I2C */
v = omap_hwmod_read(oh, i2c_con);
v |= I2C_EN;
omap_hwmod_write(v, oh, i2c_con);
/* Poll on RESETDONE bit */
omap_test_timeout((omap_hwmod_read(oh,
oh->class->sysc->syss_offs)
& SYSS_RESETDONE_MASK),
MAX_MODULE_SOFTRESET_WAIT, c);
if (c == MAX_MODULE_SOFTRESET_WAIT)
pr_warning("%s: %s: softreset failed (waited %d usec)\n",
__func__, oh->name, MAX_MODULE_SOFTRESET_WAIT);
else
pr_debug("%s: %s: softreset in %d usec\n", __func__,
oh->name, c);
return 0;
}
arch/arm/mach-omap2/io.c
View file @ c8458413
......@@ -333,23 +333,9 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
}
/* See irq.c, omap4-common.c and entry-macro.S */
void __iomem *omap_irq_base;
/*
* Initialize asm_irq_base for entry-macro.S
*/
static inline void omap_irq_base_init(void)
{
if (cpu_is_omap24xx())
omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE);
else if (cpu_is_omap34xx())
omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE);
else if (cpu_is_omap44xx())
omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE);
else
pr_err("Could not initialize omap_irq_base\n");
}
void __init omap2_init_common_infrastructure(void)
{
u8 postsetup_state;
......@@ -422,7 +408,6 @@ void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
_omap2_init_reprogram_sdrc();
}
omap_irq_base_init();
}
/*
......
arch/arm/mach-omap2/irq.c
View file @ c8458413
......@@ -141,25 +141,20 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
IRQ_NOREQUEST | IRQ_NOPROBE, 0);
}
void __init omap_init_irq(void)
static void __init omap_init_irq(u32 base, int nr_irqs)
{
unsigned long nr_of_irqs = 0;
unsigned int nr_banks = 0;
int i, j;
omap_irq_base = ioremap(base, SZ_4K);
if (WARN_ON(!omap_irq_base))
return;
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
unsigned long base = 0;
struct omap_irq_bank *bank = irq_banks + i;
if (cpu_is_omap24xx())
base = OMAP24XX_IC_BASE;
else if (cpu_is_omap34xx())
base = OMAP34XX_IC_BASE;
BUG_ON(!base);
if (cpu_is_ti816x())
bank->nr_irqs = 128;
bank->nr_irqs = nr_irqs;
/* Static mapping, never released */
bank->base_reg = ioremap(base, SZ_4K);
......@@ -181,6 +176,21 @@ void __init omap_init_irq(void)
nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
}
void __init omap2_init_irq(void)
{
omap_init_irq(OMAP24XX_IC_BASE, 96);
}
void __init omap3_init_irq(void)
{
omap_init_irq(OMAP34XX_IC_BASE, 96);
}
void __init ti816x_init_irq(void)
{
omap_init_irq(OMAP34XX_IC_BASE, 128);
}
#ifdef CONFIG_ARCH_OMAP3
static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
......
arch/arm/mach-omap2/omap4-common.c
View file @ c8458413
......@@ -19,6 +19,8 @@
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <plat/irqs.h>
#include <mach/hardware.h>
#include <mach/omap4-common.h>
......@@ -31,17 +33,15 @@ void __iomem *gic_dist_base_addr;
void __init gic_init_irq(void)
{
void __iomem *gic_cpu_base;
/* Static mapping, never released */
gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
BUG_ON(!gic_dist_base_addr);
/* Static mapping, never released */
gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
BUG_ON(!gic_cpu_base);
omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
BUG_ON(!omap_irq_base);
gic_init(0, 29, gic_dist_base_addr, gic_cpu_base);
gic_init(0, 29, gic_dist_base_addr, omap_irq_base);
}
#ifdef CONFIG_CACHE_L2X0
......
arch/arm/mach-omap2/omap_hwmod.c
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_2420_data.c
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_2430_data.c
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c 0 → 100644
View file @ c8458413
/*
* omap_hwmod_2xxx_3xxx_interconnect_data.c - common interconnect data, OMAP2/3
*
* Copyright (C) 2009-2011 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* XXX handle crossbar/shared link difference for L3?
* XXX these should be marked initdata for multi-OMAP kernels
*/
#include <asm/sizes.h>
#include <plat/omap_hwmod.h>
#include <plat/serial.h>
#include "omap_hwmod_common_data.h"
struct omap_hwmod_addr_space omap2430_mmc1_addr_space[] = {
{
.pa_start = 0x4809c000,
.pa_end = 0x4809c1ff,
.flags = ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_addr_space omap2430_mmc2_addr_space[] = {
{
.pa_start = 0x480b4000,
.pa_end = 0x480b41ff,
.flags = ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_addr_space omap2_i2c1_addr_space[] = {
{
.pa_start = 0x48070000,
.pa_end = 0x48070000 + SZ_128 - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_addr_space omap2_i2c2_addr_space[] = {
{
.pa_start = 0x48072000,
.pa_end = 0x48072000 + SZ_128 - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_addr_space omap2_dss_addrs[] = {
{
.pa_start = 0x48050000,
.pa_end = 0x48050000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2_dss_dispc_addrs[] = {
{
.pa_start = 0x48050400,
.pa_end = 0x48050400 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2_dss_rfbi_addrs[] = {
{
.pa_start = 0x48050800,
.pa_end = 0x48050800 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2_dss_venc_addrs[] = {
{
.pa_start = 0x48050C00,
.pa_end = 0x48050C00 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2_timer10_addrs[] = {
{
.pa_start = 0x48086000,
.pa_end = 0x48086000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2_timer11_addrs[] = {
{
.pa_start = 0x48088000,
.pa_end = 0x48088000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2xxx_timer12_addrs[] = {
{
.pa_start = 0x4808a000,
.pa_end = 0x4808a000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2_mcspi1_addr_space[] = {
{
.pa_start = 0x48098000,
.pa_end = 0x48098000 + SZ_256 - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_addr_space omap2_mcspi2_addr_space[] = {
{
.pa_start = 0x4809a000,
.pa_end = 0x4809a000 + SZ_256 - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[] = {
{
.pa_start = 0x480b8000,
.pa_end = 0x480b8000 + SZ_256 - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_addr_space omap2_dma_system_addrs[] = {
{
.pa_start = 0x48056000,
.pa_end = 0x48056000 + SZ_4K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2_mailbox_addrs[] = {
{
.pa_start = 0x48094000,
.pa_end = 0x48094000 + SZ_512 - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_addr_space omap2_mcbsp1_addrs[] = {
{
.name = "mpu",
.pa_start = 0x48074000,
.pa_end = 0x480740ff,
.flags = ADDR_TYPE_RT
},
{ }
};
arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c 0 → 100644
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c 0 → 100644
View file @ c8458413
/*
* omap_hwmod_2xxx_interconnect_data.c - common interconnect data for OMAP2xxx
*
* Copyright (C) 2009-2011 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* XXX handle crossbar/shared link difference for L3?
* XXX these should be marked initdata for multi-OMAP kernels
*/
#include <asm/sizes.h>
#include <plat/omap_hwmod.h>
#include <plat/serial.h>
#include "omap_hwmod_common_data.h"
struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[] = {
{
.pa_start = OMAP2_UART1_BASE,
.pa_end = OMAP2_UART1_BASE + SZ_8K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[] = {
{
.pa_start = OMAP2_UART2_BASE,
.pa_end = OMAP2_UART2_BASE + SZ_1K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[] = {
{
.pa_start = OMAP2_UART3_BASE,
.pa_end = OMAP2_UART3_BASE + SZ_1K - 1,
.flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
},
{ }
};
struct omap_hwmod_addr_space omap2xxx_timer2_addrs[] = {
{
.pa_start = 0x4802a000,
.pa_end = 0x4802a000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2xxx_timer3_addrs[] = {
{
.pa_start = 0x48078000,
.pa_end = 0x48078000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2xxx_timer4_addrs[] = {
{
.pa_start = 0x4807a000,
.pa_end = 0x4807a000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2xxx_timer5_addrs[] = {
{
.pa_start = 0x4807c000,
.pa_end = 0x4807c000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2xxx_timer6_addrs[] = {
{
.pa_start = 0x4807e000,
.pa_end = 0x4807e000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2xxx_timer7_addrs[] = {
{
.pa_start = 0x48080000,
.pa_end = 0x48080000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2xxx_timer8_addrs[] = {
{
.pa_start = 0x48082000,
.pa_end = 0x48082000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2xxx_timer9_addrs[] = {
{
.pa_start = 0x48084000,
.pa_end = 0x48084000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[] = {
{
.name = "mpu",
.pa_start = 0x48076000,
.pa_end = 0x480760ff,
.flags = ADDR_TYPE_RT
},
{ }
};
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c 0 → 100644
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_common_data.c
View file @ c8458413
......@@ -49,23 +49,3 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = {
.srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT,
};
/*
* omap_hwmod class data
*/
struct omap_hwmod_class l3_hwmod_class = {
.name = "l3"
};
struct omap_hwmod_class l4_hwmod_class = {
.name = "l4"
};
struct omap_hwmod_class mpu_hwmod_class = {
.name = "mpu"
};
struct omap_hwmod_class iva_hwmod_class = {
.name = "iva"
};
arch/arm/mach-omap2/pm-debug.c
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/pm.h
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/pm24xx.c
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/pm34xx.c
View file @ c8458413
......@@ -497,8 +497,6 @@ void omap_sram_idle(void)
int omap3_can_sleep(void)
{
if (!sleep_while_idle)
return 0;
if (!omap_uart_can_sleep())
return 0;
return 1;
......@@ -534,10 +532,6 @@ static int omap3_pm_suspend(void)
struct power_state *pwrst;
int state, ret = 0;
if (wakeup_timer_seconds || wakeup_timer_milliseconds)
omap2_pm_wakeup_on_timer(wakeup_timer_seconds,
wakeup_timer_milliseconds);
/* Read current next_pwrsts */
list_for_each_entry(pwrst, &pwrst_list, node)
pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
......
arch/arm/mach-omap2/powerdomains44xx_data.c
View file @ c8458413
......@@ -205,7 +205,7 @@ static struct powerdomain mpu_44xx_pwrdm = {
.prcm_offs = OMAP4430_PRM_MPU_INST,
.prcm_partition = OMAP4430_PRM_PARTITION,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
.pwrsts = PWRSTS_OFF_RET_ON,
.pwrsts = PWRSTS_RET_ON,
.pwrsts_logic_ret = PWRSTS_OFF_RET,
.banks = 3,
.pwrsts_mem_ret = {
......
arch/arm/mach-omap2/prcm_mpu44xx.h
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/prm44xx.h
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/smartreflex.c
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/timer-gp.h deleted 100644 → 0
View file @ 9a2a3603
This diff is collapsed.
arch/arm/mach-omap2/twl-common.c 0 → 100644
View file @ c8458413
This diff is collapsed.
arch/arm/mach-omap2/twl-common.h 0 → 100644
View file @ c8458413
This diff is collapsed.
arch/arm/plat-omap/Kconfig
View file @ c8458413
This diff is collapsed.
arch/arm/plat-omap/counter_32k.c
View file @ c8458413
This diff is collapsed.
arch/arm/plat-omap/dmtimer.c
View file @ c8458413
This diff is collapsed.
arch/arm/plat-omap/include/plat/clock.h
View file @ c8458413
This diff is collapsed.
arch/arm/plat-omap/include/plat/common.h
View file @ c8458413
This diff is collapsed.
arch/arm/plat-omap/include/plat/dmtimer.h
View file @ c8458413
This diff is collapsed.
arch/arm/plat-omap/include/plat/i2c.h
View file @ c8458413
This diff is collapsed.
arch/arm/plat-omap/include/plat/irqs.h
View file @ c8458413
This diff is collapsed.
arch/arm/plat-omap/include/plat/mcbsp.h
View file @ c8458413
This diff is collapsed.
arch/arm/plat-omap/include/plat/nand.h
View file @ c8458413
This diff is collapsed.
arch/arm/plat-omap/include/plat/omap-pm.h
View file @ c8458413
This diff is collapsed.
arch/arm/plat-omap/mcbsp.c
View file @ c8458413
This diff is collapsed.
arch/arm/plat-omap/omap_device.c
View file @ c8458413
This diff is collapsed.
include/linux/i2c-omap.h
View file @ c8458413
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7