drm/panel: raydium: Use dev_ based logging

Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-4-sam@ravnborg.org

drivers/gpu/drm/panel/panel-raydium-rm67191.c

@@ -19,7 +19,6 @@
 #include <drm/drm_crtc.h>
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_panel.h>
-#include <drm/drm_print.h>
 
 /* Panel specific color-format bits */
 #define COL_FMT_16BPP 0x55
@@ -329,7 +328,7 @@ static int rad_panel_enable(struct drm_panel *panel)
 
 	ret = rad_panel_push_cmd_list(dsi);
 	if (ret < 0) {
-		DRM_DEV_ERROR(dev, "Failed to send MCS (%d)\n", ret);
+		dev_err(dev, "Failed to send MCS (%d)\n", ret);
 		goto fail;
 	}
 
@@ -341,7 +340,7 @@ static int rad_panel_enable(struct drm_panel *panel)
 	/* Software reset */
 	ret = mipi_dsi_dcs_soft_reset(dsi);
 	if (ret < 0) {
-		DRM_DEV_ERROR(dev, "Failed to do Software Reset (%d)\n", ret);
+		dev_err(dev, "Failed to do Software Reset (%d)\n", ret);
 		goto fail;
 	}
 
@@ -350,33 +349,32 @@ static int rad_panel_enable(struct drm_panel *panel)
 	/* Set DSI mode */
 	ret = mipi_dsi_generic_write(dsi, (u8[]){ 0xC2, 0x0B }, 2);
 	if (ret < 0) {
-		DRM_DEV_ERROR(dev, "Failed to set DSI mode (%d)\n", ret);
+		dev_err(dev, "Failed to set DSI mode (%d)\n", ret);
 		goto fail;
 	}
 	/* Set tear ON */
 	ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
 	if (ret < 0) {
-		DRM_DEV_ERROR(dev, "Failed to set tear ON (%d)\n", ret);
+		dev_err(dev, "Failed to set tear ON (%d)\n", ret);
 		goto fail;
 	}
 	/* Set tear scanline */
 	ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0x380);
 	if (ret < 0) {
-		DRM_DEV_ERROR(dev, "Failed to set tear scanline (%d)\n", ret);
+		dev_err(dev, "Failed to set tear scanline (%d)\n", ret);
 		goto fail;
 	}
 	/* Set pixel format */
 	ret = mipi_dsi_dcs_set_pixel_format(dsi, color_format);
-	DRM_DEV_DEBUG_DRIVER(dev, "Interface color format set to 0x%x\n",
-			     color_format);
+	dev_dbg(dev, "Interface color format set to 0x%x\n", color_format);
 	if (ret < 0) {
-		DRM_DEV_ERROR(dev, "Failed to set pixel format (%d)\n", ret);
+		dev_err(dev, "Failed to set pixel format (%d)\n", ret);
 		goto fail;
 	}
 	/* Exit sleep mode */
 	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
 	if (ret < 0) {
-		DRM_DEV_ERROR(dev, "Failed to exit sleep mode (%d)\n", ret);
+		dev_err(dev, "Failed to exit sleep mode (%d)\n", ret);
 		goto fail;
 	}
 
@@ -384,7 +382,7 @@ static int rad_panel_enable(struct drm_panel *panel)
 
 	ret = mipi_dsi_dcs_set_display_on(dsi);
 	if (ret < 0) {
-		DRM_DEV_ERROR(dev, "Failed to set display ON (%d)\n", ret);
+		dev_err(dev, "Failed to set display ON (%d)\n", ret);
 		goto fail;
 	}
 
@@ -418,7 +416,7 @@ static int rad_panel_disable(struct drm_panel *panel)
 
 	ret = mipi_dsi_dcs_set_display_off(dsi);
 	if (ret < 0) {
-		DRM_DEV_ERROR(dev, "Failed to set display OFF (%d)\n", ret);
+		dev_err(dev, "Failed to set display OFF (%d)\n", ret);
 		return ret;
 	}
 
@@ -426,7 +424,7 @@ static int rad_panel_disable(struct drm_panel *panel)
 
 	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
 	if (ret < 0) {
-		DRM_DEV_ERROR(dev, "Failed to enter sleep mode (%d)\n", ret);
+		dev_err(dev, "Failed to enter sleep mode (%d)\n", ret);
 		return ret;
 	}
 
@@ -442,7 +440,7 @@ static int rad_panel_get_modes(struct drm_panel *panel,
 
 	mode = drm_mode_duplicate(connector->dev, &default_mode);
 	if (!mode) {
-		DRM_DEV_ERROR(panel->dev, "failed to add mode %ux%ux@%u\n",
+		dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
 			default_mode.hdisplay, default_mode.vdisplay,
 			drm_mode_vrefresh(&default_mode));
 		return -ENOMEM;
@@ -626,8 +624,7 @@ static int rad_panel_remove(struct mipi_dsi_device *dsi)
 
 	ret = mipi_dsi_detach(dsi);
 	if (ret)
-		DRM_DEV_ERROR(dev, "Failed to detach from host (%d)\n",
-			      ret);
+		dev_err(dev, "Failed to detach from host (%d)\n", ret);
 
 	drm_panel_remove(&rad->panel);
 

drivers/gpu/drm/panel/panel-raydium-rm68200.c

@@ -17,7 +17,6 @@
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_modes.h>
 #include <drm/drm_panel.h>
-#include <drm/drm_print.h>
 
 /*** Manufacturer Command Set ***/
 #define MCS_CMD_MODE_SW		0xFE /* CMD Mode Switch */
@@ -110,8 +109,7 @@ static void rm68200_dcs_write_buf(struct rm68200 *ctx, const void *data,
 
 	err = mipi_dsi_dcs_write_buffer(dsi, data, len);
 	if (err < 0)
-		DRM_ERROR_RATELIMITED("MIPI DSI DCS write buffer failed: %d\n",
-				      err);
+		dev_err_ratelimited(ctx->dev, "MIPI DSI DCS write buffer failed: %d\n", err);
 }
 
 static void rm68200_dcs_write_cmd(struct rm68200 *ctx, u8 cmd, u8 value)
@@ -121,7 +119,7 @@ static void rm68200_dcs_write_cmd(struct rm68200 *ctx, u8 cmd, u8 value)
 
 	err = mipi_dsi_dcs_write(dsi, cmd, &value, 1);
 	if (err < 0)
-		DRM_ERROR_RATELIMITED("MIPI DSI DCS write failed: %d\n", err);
+		dev_err_ratelimited(ctx->dev, "MIPI DSI DCS write failed: %d\n", err);
 }
 
 #define dcs_write_seq(ctx, seq...)				\
@@ -256,11 +254,11 @@ static int rm68200_unprepare(struct drm_panel *panel)
 
 	ret = mipi_dsi_dcs_set_display_off(dsi);
 	if (ret)
-		DRM_WARN("failed to set display off: %d\n", ret);
+		dev_warn(panel->dev, "failed to set display off: %d\n", ret);
 
 	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
 	if (ret)
-		DRM_WARN("failed to enter sleep mode: %d\n", ret);
+		dev_warn(panel->dev, "failed to enter sleep mode: %d\n", ret);
 
 	msleep(120);
 
@@ -287,7 +285,7 @@ static int rm68200_prepare(struct drm_panel *panel)
 
 	ret = regulator_enable(ctx->supply);
 	if (ret < 0) {
-		DRM_ERROR("failed to enable supply: %d\n", ret);
+		dev_err(ctx->dev, "failed to enable supply: %d\n", ret);
 		return ret;
 	}
 
@@ -336,7 +334,7 @@ static int rm68200_get_modes(struct drm_panel *panel,
 
 	mode = drm_mode_duplicate(connector->dev, &default_mode);
 	if (!mode) {
-		DRM_ERROR("failed to add mode %ux%ux@%u\n",
+		dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
 			default_mode.hdisplay, default_mode.vdisplay,
 			drm_mode_vrefresh(&default_mode));
 		return -ENOMEM;