Commit c99c4733 authored by Chuanjia Liu's avatar Chuanjia Liu Committed by Matthias Brugger

arm64: dts: mediatek: Split PCIe node for MT2712 and MT7622

There are two independent PCIe controllers in MT2712 and MT7622
platform. Each of them should contain an independent MSI domain.

In old dts architecture, MSI domain will be inherited from the root
bridge, and all of the devices will share the same MSI domain.
Hence that, the PCIe devices will not work properly if the irq number
which required is more than 32.

Split the PCIe node for MT2712 and MT7622 platform to comply with
the hardware design and fix MSI issue.
Signed-off-by: default avatarChuanjia Liu <chuanjia.liu@mediatek.com>
Acked-by: default avatarRyder Lee <ryder.lee@mediatek.com>
Link: https://lore.kernel.org/r/20210823032800.1660-6-chuanjia.liu@mediatek.comSigned-off-by: default avatarMatthias Brugger <matthias.bgg@gmail.com>
parent d2bbd5d9
......@@ -915,66 +915,69 @@ u3port1: usb-phy@8700 {
};
};
pcie: pcie@11700000 {
pcie1: pcie@112ff000 {
compatible = "mediatek,mt2712-pcie";
device_type = "pci";
reg = <0 0x11700000 0 0x1000>,
<0 0x112ff000 0 0x1000>;
reg-names = "port0", "port1";
reg = <0 0x112ff000 0 0x1000>;
reg-names = "port1";
linux,pci-domain = <1>;
#address-cells = <3>;
#size-cells = <2>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
<&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
<&pericfg CLK_PERI_PCIE0>,
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pcie_irq";
clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
<&pericfg CLK_PERI_PCIE1>;
clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1";
phys = <&u3port0 PHY_TYPE_PCIE>, <&u3port1 PHY_TYPE_PCIE>;
phy-names = "pcie-phy0", "pcie-phy1";
clock-names = "sys_ck1", "ahb_ck1";
phys = <&u3port1 PHY_TYPE_PCIE>;
phy-names = "pcie-phy1";
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
pcie0: pcie@0,0 {
device_type = "pci";
ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>;
status = "disabled";
reg = <0x0000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc0 0>,
<0 0 0 2 &pcie_intc0 1>,
<0 0 0 3 &pcie_intc0 2>,
<0 0 0 4 &pcie_intc0 3>;
pcie_intc0: interrupt-controller {
interrupt-map = <0 0 0 1 &pcie_intc1 0>,
<0 0 0 2 &pcie_intc1 1>,
<0 0 0 3 &pcie_intc1 2>,
<0 0 0 4 &pcie_intc1 3>;
pcie_intc1: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
pcie1: pcie@1,0 {
pcie0: pcie@11700000 {
compatible = "mediatek,mt2712-pcie";
device_type = "pci";
status = "disabled";
reg = <0x0800 0 0 0 0>;
reg = <0 0x11700000 0 0x1000>;
reg-names = "port0";
linux,pci-domain = <0>;
#address-cells = <3>;
#size-cells = <2>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "pcie_irq";
clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
<&pericfg CLK_PERI_PCIE0>;
clock-names = "sys_ck0", "ahb_ck0";
phys = <&u3port0 PHY_TYPE_PCIE>;
phy-names = "pcie-phy0";
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
status = "disabled";
#interrupt-cells = <1>;
ranges;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc1 0>,
<0 0 0 2 &pcie_intc1 1>,
<0 0 0 3 &pcie_intc1 2>,
<0 0 0 4 &pcie_intc1 3>;
pcie_intc1: interrupt-controller {
interrupt-map = <0 0 0 1 &pcie_intc0 0>,
<0 0 0 2 &pcie_intc0 1>,
<0 0 0 3 &pcie_intc0 2>,
<0 0 0 4 &pcie_intc0 3>;
pcie_intc0: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
};
mfgcfg: syscon@13000000 {
compatible = "mediatek,mt2712-mfgcfg", "syscon";
......
......@@ -257,18 +257,16 @@ flash@0 {
};
};
&pcie {
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
pinctrl-0 = <&pcie0_pins>;
status = "okay";
};
pcie@0,0 {
status = "okay";
};
pcie@1,0 {
&pcie1 {
pinctrl-names = "default";
pinctrl-0 = <&pcie1_pins>;
status = "okay";
};
};
&pio {
......
......@@ -234,14 +234,10 @@ flash@0 {
};
};
&pcie {
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie0_pins>;
status = "okay";
pcie@0,0 {
status = "okay";
};
};
&pio {
......
......@@ -781,45 +781,36 @@ pciesys: pciesys@1a100800 {
#reset-cells = <1>;
};
pcie: pcie@1a140000 {
pciecfg: pciecfg@1a140000 {
compatible = "mediatek,generic-pciecfg", "syscon";
reg = <0 0x1a140000 0 0x1000>;
};
pcie0: pcie@1a143000 {
compatible = "mediatek,mt7622-pcie";
device_type = "pci";
reg = <0 0x1a140000 0 0x1000>,
<0 0x1a143000 0 0x1000>,
<0 0x1a145000 0 0x1000>;
reg-names = "subsys", "port0", "port1";
reg = <0 0x1a143000 0 0x1000>;
reg-names = "port0";
linux,pci-domain = <0>;
#address-cells = <3>;
#size-cells = <2>;
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "pcie_irq";
clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
<&pciesys CLK_PCIE_P1_MAC_EN>,
<&pciesys CLK_PCIE_P0_AHB_EN>,
<&pciesys CLK_PCIE_P0_AHB_EN>,
<&pciesys CLK_PCIE_P0_AUX_EN>,
<&pciesys CLK_PCIE_P1_AUX_EN>,
<&pciesys CLK_PCIE_P0_AXI_EN>,
<&pciesys CLK_PCIE_P1_AXI_EN>,
<&pciesys CLK_PCIE_P0_OBFF_EN>,
<&pciesys CLK_PCIE_P1_OBFF_EN>,
<&pciesys CLK_PCIE_P0_PIPE_EN>,
<&pciesys CLK_PCIE_P1_PIPE_EN>;
clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
"aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
"obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
<&pciesys CLK_PCIE_P0_PIPE_EN>;
clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
"axi_ck0", "obff_ck0", "pipe_ck0";
power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>;
status = "disabled";
pcie0: pcie@0,0 {
reg = <0x0000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
status = "disabled";
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc0 0>,
<0 0 0 2 &pcie_intc0 1>,
......@@ -832,14 +823,32 @@ pcie_intc0: interrupt-controller {
};
};
pcie1: pcie@1,0 {
reg = <0x0800 0 0 0 0>;
pcie1: pcie@1a145000 {
compatible = "mediatek,mt7622-pcie";
device_type = "pci";
reg = <0 0x1a145000 0 0x1000>;
reg-names = "port1";
linux,pci-domain = <1>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges;
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "pcie_irq";
clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
/* designer has connect RC1 with p0_ahb clock */
<&pciesys CLK_PCIE_P0_AHB_EN>,
<&pciesys CLK_PCIE_P1_AUX_EN>,
<&pciesys CLK_PCIE_P1_AXI_EN>,
<&pciesys CLK_PCIE_P1_OBFF_EN>,
<&pciesys CLK_PCIE_P1_PIPE_EN>;
clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
"axi_ck1", "obff_ck1", "pipe_ck1";
power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>;
status = "disabled";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc1 0>,
<0 0 0 2 &pcie_intc1 1>,
......@@ -851,7 +860,6 @@ pcie_intc1: interrupt-controller {
#interrupt-cells = <1>;
};
};
};
sata: sata@1a200000 {
compatible = "mediatek,mt7622-ahci",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment