Commit ca2942cc authored by Arnd Bergmann's avatar Arnd Bergmann

Merge tag 'renesas-dt2-for-v4.6' of...

Merge tag 'renesas-dt2-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Second Round of Renesas ARM Based SoC DT Updates for v4.6" from
Simon Horman:

* Add L2 cache-controller nodes to r8a779[0134] and r8a73a4
* Add etheravb support to r8a7794
* Correct JP3 jumper description on Porter
* Enable thermal zone on  r8a779[013]
* Replace gpio-key, wakeup with wakeup-source property on r8a7794
* Use demuxer for IIC0/I2C0 on lager
* Use fallback etheravb, pci and pcie compatibility strings as appropriate

* tag 'renesas-dt2-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: dts: r8a7790: use fallback etheravb compatibility string
  ARM: dts: r8a7790: lager: use demuxer for IIC0/I2C0
  ARM: dts: r8a7794: add EtherAVB support
  ARM: dts: r8a7794: add EtherAVB clock
  ARM: dts: r8a7794: replace gpio-key, wakeup with wakeup-source property
  ARM: dts: r8a7794: Add L2 cache-controller node
  ARM: dts: r8a7793: Add L2 cache-controller node
  ARM: dts: r8a7791: Add L2 cache-controller node
  ARM: dts: r8a7790: Add L2 cache-controller nodes
  ARM: dts: r8a73a4: Add L2 cache-controller nodes
  ARM: dts: r8a7793: enable to use thermal-zone
  ARM: dts: r8a7791: enable to use thermal-zone
  ARM: dts: r8a7790: enable to use thermal-zone
  ARM: dts: porter: fix JP3 jumper description
  ARM: dts: r8a7794: use fallback pci compatibility string
  ARM: dts: r8a7791: use fallback pci compatibility string
  ARM: dts: r8a7790: use fallback pci compatibility string
  ARM: dts: r8a7791: use fallback pcie compatibility string
  ARM: dts: r8a7790: use fallback pcie compatibility string
parents 7aec2fd7 d92df7e5
...@@ -29,6 +29,7 @@ cpu0: cpu@0 { ...@@ -29,6 +29,7 @@ cpu0: cpu@0 {
reg = <0>; reg = <0>;
clock-frequency = <1500000000>; clock-frequency = <1500000000>;
power-domains = <&pd_a2sl>; power-domains = <&pd_a2sl>;
next-level-cache = <&L2_CA15>;
}; };
}; };
...@@ -45,6 +46,22 @@ timer { ...@@ -45,6 +46,22 @@ timer {
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
}; };
L2_CA15: cache-controller@0 {
compatible = "cache";
clocks = <&cpg_clocks R8A73A4_CLK_Z>;
power-domains = <&pd_a3sm>;
cache-unified;
cache-level = <2>;
};
L2_CA7: cache-controller@1 {
compatible = "cache";
clocks = <&cpg_clocks R8A73A4_CLK_Z2>;
power-domains = <&pd_a3km>;
cache-unified;
cache-level = <2>;
};
dbsc1: memory-controller@e6790000 { dbsc1: memory-controller@e6790000 {
compatible = "renesas,dbsc-r8a73a4"; compatible = "renesas,dbsc-r8a73a4";
reg = <0 0xe6790000 0 0x10000>; reg = <0 0xe6790000 0 0x10000>;
......
...@@ -3,6 +3,7 @@ ...@@ -3,6 +3,7 @@
* *
* Copyright (C) 2013-2014 Renesas Solutions Corp. * Copyright (C) 2013-2014 Renesas Solutions Corp.
* Copyright (C) 2014 Cogent Embedded, Inc. * Copyright (C) 2014 Cogent Embedded, Inc.
* Copyright (C) 2015-2016 Renesas Electronics Corporation
* *
* This file is licensed under the terms of the GNU General Public License * This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any * version 2. This program is licensed "as is" without any warranty of any
...@@ -49,6 +50,7 @@ / { ...@@ -49,6 +50,7 @@ / {
aliases { aliases {
serial0 = &scif0; serial0 = &scif0;
serial1 = &scifa1; serial1 = &scifa1;
i2c8 = "i2cexio";
}; };
chosen { chosen {
...@@ -252,6 +254,23 @@ x13_clk: x13-clock { ...@@ -252,6 +254,23 @@ x13_clk: x13-clock {
#clock-cells = <0>; #clock-cells = <0>;
clock-frequency = <148500000>; clock-frequency = <148500000>;
}; };
/*
* IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only.
* We use the I2C demuxer, so the desired IP core can be selected at runtime
* depending on the use case (e.g. DMA with IIC0 or slave support with I2C0).
* Note: For testing the I2C slave feature, it is convenient to connect this
* bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and
* instantiate the slave device at runtime according to the documentation.
* You can then communicate with the slave via IIC3.
*/
i2cexio: i2c@8 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic0>, <&i2c0>;
i2c-bus-name = "i2c-exio";
#address-cells = <1>;
#size-cells = <0>;
};
}; };
&du { &du {
...@@ -350,6 +369,11 @@ msiof1_pins: spi2 { ...@@ -350,6 +369,11 @@ msiof1_pins: spi2 {
renesas,function = "msiof1"; renesas,function = "msiof1";
}; };
i2c0_pins: i2c0 {
renesas,groups = "i2c0";
renesas,function = "i2c0";
};
iic0_pins: iic0 { iic0_pins: iic0 {
renesas,groups = "iic0"; renesas,groups = "iic0";
renesas,function = "iic0"; renesas,function = "iic0";
...@@ -537,10 +561,14 @@ &cpu0 { ...@@ -537,10 +561,14 @@ &cpu0 {
cpu0-supply = <&vdd_dvfs>; cpu0-supply = <&vdd_dvfs>;
}; };
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "i2c-exio";
};
&iic0 { &iic0 {
status = "okay";
pinctrl-0 = <&iic0_pins>; pinctrl-0 = <&iic0_pins>;
pinctrl-names = "default"; pinctrl-names = "i2c-exio";
}; };
&iic1 { &iic1 {
......
...@@ -52,6 +52,7 @@ cpu0: cpu@0 { ...@@ -52,6 +52,7 @@ cpu0: cpu@0 {
voltage-tolerance = <1>; /* 1% */ voltage-tolerance = <1>; /* 1% */
clocks = <&cpg_clocks R8A7790_CLK_Z>; clocks = <&cpg_clocks R8A7790_CLK_Z>;
clock-latency = <300000>; /* 300 us */ clock-latency = <300000>; /* 300 us */
next-level-cache = <&L2_CA15>;
/* kHz - uV - OPPs unknown yet */ /* kHz - uV - OPPs unknown yet */
operating-points = <1400000 1000000>, operating-points = <1400000 1000000>,
...@@ -67,6 +68,7 @@ cpu1: cpu@1 { ...@@ -67,6 +68,7 @@ cpu1: cpu@1 {
compatible = "arm,cortex-a15"; compatible = "arm,cortex-a15";
reg = <1>; reg = <1>;
clock-frequency = <1300000000>; clock-frequency = <1300000000>;
next-level-cache = <&L2_CA15>;
}; };
cpu2: cpu@2 { cpu2: cpu@2 {
...@@ -74,6 +76,7 @@ cpu2: cpu@2 { ...@@ -74,6 +76,7 @@ cpu2: cpu@2 {
compatible = "arm,cortex-a15"; compatible = "arm,cortex-a15";
reg = <2>; reg = <2>;
clock-frequency = <1300000000>; clock-frequency = <1300000000>;
next-level-cache = <&L2_CA15>;
}; };
cpu3: cpu@3 { cpu3: cpu@3 {
...@@ -81,6 +84,7 @@ cpu3: cpu@3 { ...@@ -81,6 +84,7 @@ cpu3: cpu@3 {
compatible = "arm,cortex-a15"; compatible = "arm,cortex-a15";
reg = <3>; reg = <3>;
clock-frequency = <1300000000>; clock-frequency = <1300000000>;
next-level-cache = <&L2_CA15>;
}; };
cpu4: cpu@4 { cpu4: cpu@4 {
...@@ -88,6 +92,7 @@ cpu4: cpu@4 { ...@@ -88,6 +92,7 @@ cpu4: cpu@4 {
compatible = "arm,cortex-a7"; compatible = "arm,cortex-a7";
reg = <0x100>; reg = <0x100>;
clock-frequency = <780000000>; clock-frequency = <780000000>;
next-level-cache = <&L2_CA7>;
}; };
cpu5: cpu@5 { cpu5: cpu@5 {
...@@ -95,6 +100,7 @@ cpu5: cpu@5 { ...@@ -95,6 +100,7 @@ cpu5: cpu@5 {
compatible = "arm,cortex-a7"; compatible = "arm,cortex-a7";
reg = <0x101>; reg = <0x101>;
clock-frequency = <780000000>; clock-frequency = <780000000>;
next-level-cache = <&L2_CA7>;
}; };
cpu6: cpu@6 { cpu6: cpu@6 {
...@@ -102,6 +108,7 @@ cpu6: cpu@6 { ...@@ -102,6 +108,7 @@ cpu6: cpu@6 {
compatible = "arm,cortex-a7"; compatible = "arm,cortex-a7";
reg = <0x102>; reg = <0x102>;
clock-frequency = <780000000>; clock-frequency = <780000000>;
next-level-cache = <&L2_CA7>;
}; };
cpu7: cpu@7 { cpu7: cpu@7 {
...@@ -109,9 +116,41 @@ cpu7: cpu@7 { ...@@ -109,9 +116,41 @@ cpu7: cpu@7 {
compatible = "arm,cortex-a7"; compatible = "arm,cortex-a7";
reg = <0x103>; reg = <0x103>;
clock-frequency = <780000000>; clock-frequency = <780000000>;
next-level-cache = <&L2_CA7>;
}; };
}; };
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&thermal>;
trips {
cpu-crit {
temperature = <115000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
};
};
};
L2_CA15: cache-controller@0 {
compatible = "cache";
cache-unified;
cache-level = <2>;
};
L2_CA7: cache-controller@1 {
compatible = "cache";
cache-unified;
cache-level = <2>;
};
gic: interrupt-controller@f1001000 { gic: interrupt-controller@f1001000 {
compatible = "arm,gic-400"; compatible = "arm,gic-400";
#interrupt-cells = <3>; #interrupt-cells = <3>;
...@@ -202,12 +241,15 @@ gpio5: gpio@e6055000 { ...@@ -202,12 +241,15 @@ gpio5: gpio@e6055000 {
power-domains = <&cpg_clocks>; power-domains = <&cpg_clocks>;
}; };
thermal@e61f0000 { thermal: thermal@e61f0000 {
compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal"; compatible = "renesas,thermal-r8a7790",
"renesas,rcar-gen2-thermal",
"renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7790_CLK_THERMAL>; clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
power-domains = <&cpg_clocks>; power-domains = <&cpg_clocks>;
#thermal-sensor-cells = <0>;
}; };
timer { timer {
...@@ -731,7 +773,8 @@ ether: ethernet@ee700000 { ...@@ -731,7 +773,8 @@ ether: ethernet@ee700000 {
}; };
avb: ethernet@e6800000 { avb: ethernet@e6800000 {
compatible = "renesas,etheravb-r8a7790"; compatible = "renesas,etheravb-r8a7790",
"renesas,etheravb-rcar-gen2";
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>; clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>;
...@@ -1499,7 +1542,7 @@ xhci: usb@ee000000 { ...@@ -1499,7 +1542,7 @@ xhci: usb@ee000000 {
}; };
pci0: pci@ee090000 { pci0: pci@ee090000 {
compatible = "renesas,pci-r8a7790"; compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
device_type = "pci"; device_type = "pci";
reg = <0 0xee090000 0 0xc00>, reg = <0 0xee090000 0 0xc00>,
<0 0xee080000 0 0x1100>; <0 0xee080000 0 0x1100>;
...@@ -1534,7 +1577,7 @@ usb@0,2 { ...@@ -1534,7 +1577,7 @@ usb@0,2 {
}; };
pci1: pci@ee0b0000 { pci1: pci@ee0b0000 {
compatible = "renesas,pci-r8a7790"; compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
device_type = "pci"; device_type = "pci";
reg = <0 0xee0b0000 0 0xc00>, reg = <0 0xee0b0000 0 0xc00>,
<0 0xee0a0000 0 0x1100>; <0 0xee0a0000 0 0x1100>;
...@@ -1555,7 +1598,7 @@ pci1: pci@ee0b0000 { ...@@ -1555,7 +1598,7 @@ pci1: pci@ee0b0000 {
}; };
pci2: pci@ee0d0000 { pci2: pci@ee0d0000 {
compatible = "renesas,pci-r8a7790"; compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
device_type = "pci"; device_type = "pci";
clocks = <&mstp7_clks R8A7790_CLK_EHCI>; clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
power-domains = <&cpg_clocks>; power-domains = <&cpg_clocks>;
...@@ -1590,7 +1633,7 @@ usb@0,2 { ...@@ -1590,7 +1633,7 @@ usb@0,2 {
}; };
pciec: pcie@fe000000 { pciec: pcie@fe000000 {
compatible = "renesas,pcie-r8a7790"; compatible = "renesas,pcie-r8a7790", "renesas,pcie-rcar-gen2";
reg = <0 0xfe000000 0 0x80000>; reg = <0 0xfe000000 0 0x80000>;
#address-cells = <3>; #address-cells = <3>;
#size-cells = <2>; #size-cells = <2>;
......
...@@ -11,8 +11,8 @@ ...@@ -11,8 +11,8 @@
/* /*
* SSI-AK4642 * SSI-AK4642
* *
* SW3: 1: AK4642 * JP3: 2-1: AK4642
* 3: ADV7511 * 2-3: ADV7511
* *
* This command is required before playback/capture: * This command is required before playback/capture:
* *
......
...@@ -51,6 +51,7 @@ cpu0: cpu@0 { ...@@ -51,6 +51,7 @@ cpu0: cpu@0 {
voltage-tolerance = <1>; /* 1% */ voltage-tolerance = <1>; /* 1% */
clocks = <&cpg_clocks R8A7791_CLK_Z>; clocks = <&cpg_clocks R8A7791_CLK_Z>;
clock-latency = <300000>; /* 300 us */ clock-latency = <300000>; /* 300 us */
next-level-cache = <&L2_CA15>;
/* kHz - uV - OPPs unknown yet */ /* kHz - uV - OPPs unknown yet */
operating-points = <1500000 1000000>, operating-points = <1500000 1000000>,
...@@ -66,9 +67,35 @@ cpu1: cpu@1 { ...@@ -66,9 +67,35 @@ cpu1: cpu@1 {
compatible = "arm,cortex-a15"; compatible = "arm,cortex-a15";
reg = <1>; reg = <1>;
clock-frequency = <1500000000>; clock-frequency = <1500000000>;
next-level-cache = <&L2_CA15>;
}; };
}; };
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&thermal>;
trips {
cpu-crit {
temperature = <115000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
};
};
};
L2_CA15: cache-controller@0 {
compatible = "cache";
cache-unified;
cache-level = <2>;
};
gic: interrupt-controller@f1001000 { gic: interrupt-controller@f1001000 {
compatible = "arm,gic-400"; compatible = "arm,gic-400";
#interrupt-cells = <3>; #interrupt-cells = <3>;
...@@ -185,12 +212,15 @@ gpio7: gpio@e6055800 { ...@@ -185,12 +212,15 @@ gpio7: gpio@e6055800 {
power-domains = <&cpg_clocks>; power-domains = <&cpg_clocks>;
}; };
thermal@e61f0000 { thermal: thermal@e61f0000 {
compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal"; compatible = "renesas,thermal-r8a7791",
"renesas,rcar-gen2-thermal",
"renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7791_CLK_THERMAL>; clocks = <&mstp5_clks R8A7791_CLK_THERMAL>;
power-domains = <&cpg_clocks>; power-domains = <&cpg_clocks>;
#thermal-sensor-cells = <0>;
}; };
timer { timer {
...@@ -1530,7 +1560,7 @@ xhci: usb@ee000000 { ...@@ -1530,7 +1560,7 @@ xhci: usb@ee000000 {
}; };
pci0: pci@ee090000 { pci0: pci@ee090000 {
compatible = "renesas,pci-r8a7791"; compatible = "renesas,pci-r8a7791", "renesas,pci-rcar-gen2";
device_type = "pci"; device_type = "pci";
reg = <0 0xee090000 0 0xc00>, reg = <0 0xee090000 0 0xc00>,
<0 0xee080000 0 0x1100>; <0 0xee080000 0 0x1100>;
...@@ -1565,7 +1595,7 @@ usb@0,2 { ...@@ -1565,7 +1595,7 @@ usb@0,2 {
}; };
pci1: pci@ee0d0000 { pci1: pci@ee0d0000 {
compatible = "renesas,pci-r8a7791"; compatible = "renesas,pci-r8a7791", "renesas,pci-rcar-gen2";
device_type = "pci"; device_type = "pci";
reg = <0 0xee0d0000 0 0xc00>, reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>; <0 0xee0c0000 0 0x1100>;
...@@ -1600,7 +1630,7 @@ usb@0,2 { ...@@ -1600,7 +1630,7 @@ usb@0,2 {
}; };
pciec: pcie@fe000000 { pciec: pcie@fe000000 {
compatible = "renesas,pcie-r8a7791"; compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
reg = <0 0xfe000000 0 0x80000>; reg = <0 0xfe000000 0 0x80000>;
#address-cells = <3>; #address-cells = <3>;
#size-cells = <2>; #size-cells = <2>;
......
...@@ -67,77 +67,77 @@ key-1 { ...@@ -67,77 +67,77 @@ key-1 {
gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_1>; linux,code = <KEY_1>;
label = "SW2-1"; label = "SW2-1";
gpio-key,wakeup; wakeup-source;
debounce-interval = <20>; debounce-interval = <20>;
}; };
key-2 { key-2 {
gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_2>; linux,code = <KEY_2>;
label = "SW2-2"; label = "SW2-2";
gpio-key,wakeup; wakeup-source;
debounce-interval = <20>; debounce-interval = <20>;
}; };
key-3 { key-3 {
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_3>; linux,code = <KEY_3>;
label = "SW2-3"; label = "SW2-3";
gpio-key,wakeup; wakeup-source;
debounce-interval = <20>; debounce-interval = <20>;
}; };
key-4 { key-4 {
gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_4>; linux,code = <KEY_4>;
label = "SW2-4"; label = "SW2-4";
gpio-key,wakeup; wakeup-source;
debounce-interval = <20>; debounce-interval = <20>;
}; };
key-a { key-a {
gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_A>; linux,code = <KEY_A>;
label = "SW30"; label = "SW30";
gpio-key,wakeup; wakeup-source;
debounce-interval = <20>; debounce-interval = <20>;
}; };
key-b { key-b {
gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_B>; linux,code = <KEY_B>;
label = "SW31"; label = "SW31";
gpio-key,wakeup; wakeup-source;
debounce-interval = <20>; debounce-interval = <20>;
}; };
key-c { key-c {
gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_C>; linux,code = <KEY_C>;
label = "SW32"; label = "SW32";
gpio-key,wakeup; wakeup-source;
debounce-interval = <20>; debounce-interval = <20>;
}; };
key-d { key-d {
gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_D>; linux,code = <KEY_D>;
label = "SW33"; label = "SW33";
gpio-key,wakeup; wakeup-source;
debounce-interval = <20>; debounce-interval = <20>;
}; };
key-e { key-e {
gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_E>; linux,code = <KEY_E>;
label = "SW34"; label = "SW34";
gpio-key,wakeup; wakeup-source;
debounce-interval = <20>; debounce-interval = <20>;
}; };
key-f { key-f {
gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_F>; linux,code = <KEY_F>;
label = "SW35"; label = "SW35";
gpio-key,wakeup; wakeup-source;
debounce-interval = <20>; debounce-interval = <20>;
}; };
key-g { key-g {
gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_G>; linux,code = <KEY_G>;
label = "SW36"; label = "SW36";
gpio-key,wakeup; wakeup-source;
debounce-interval = <20>; debounce-interval = <20>;
}; };
}; };
......
...@@ -51,9 +51,35 @@ cpu0: cpu@0 { ...@@ -51,9 +51,35 @@ cpu0: cpu@0 {
< 937500 1000000>, < 937500 1000000>,
< 750000 1000000>, < 750000 1000000>,
< 375000 1000000>; < 375000 1000000>;
next-level-cache = <&L2_CA15>;
}; };
}; };
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&thermal>;
trips {
cpu-crit {
temperature = <115000>;
hysteresis = <0>;
type = "critical";
};
};
cooling-maps {
};
};
};
L2_CA15: cache-controller@0 {
compatible = "cache";
cache-unified;
cache-level = <2>;
};
gic: interrupt-controller@f1001000 { gic: interrupt-controller@f1001000 {
compatible = "arm,gic-400"; compatible = "arm,gic-400";
#interrupt-cells = <3>; #interrupt-cells = <3>;
...@@ -170,12 +196,15 @@ gpio7: gpio@e6055800 { ...@@ -170,12 +196,15 @@ gpio7: gpio@e6055800 {
power-domains = <&cpg_clocks>; power-domains = <&cpg_clocks>;
}; };
thermal@e61f0000 { thermal: thermal@e61f0000 {
compatible = "renesas,thermal-r8a7793", "renesas,rcar-thermal"; compatible = "renesas,thermal-r8a7793",
"renesas,rcar-gen2-thermal",
"renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp5_clks R8A7793_CLK_THERMAL>; clocks = <&mstp5_clks R8A7793_CLK_THERMAL>;
power-domains = <&cpg_clocks>; power-domains = <&cpg_clocks>;
#thermal-sensor-cells = <0>;
}; };
timer { timer {
......
...@@ -40,6 +40,7 @@ cpu0: cpu@0 { ...@@ -40,6 +40,7 @@ cpu0: cpu@0 {
compatible = "arm,cortex-a7"; compatible = "arm,cortex-a7";
reg = <0>; reg = <0>;
clock-frequency = <1000000000>; clock-frequency = <1000000000>;
next-level-cache = <&L2_CA7>;
}; };
cpu1: cpu@1 { cpu1: cpu@1 {
...@@ -47,9 +48,16 @@ cpu1: cpu@1 { ...@@ -47,9 +48,16 @@ cpu1: cpu@1 {
compatible = "arm,cortex-a7"; compatible = "arm,cortex-a7";
reg = <1>; reg = <1>;
clock-frequency = <1000000000>; clock-frequency = <1000000000>;
next-level-cache = <&L2_CA7>;
}; };
}; };
L2_CA7: cache-controller@1 {
compatible = "cache";
cache-unified;
cache-level = <2>;
};
gic: interrupt-controller@f1001000 { gic: interrupt-controller@f1001000 {
compatible = "arm,gic-400"; compatible = "arm,gic-400";
#interrupt-cells = <3>; #interrupt-cells = <3>;
...@@ -536,6 +544,18 @@ ether: ethernet@ee700000 { ...@@ -536,6 +544,18 @@ ether: ethernet@ee700000 {
status = "disabled"; status = "disabled";
}; };
avb: ethernet@e6800000 {
compatible = "renesas,etheravb-r8a7794",
"renesas,etheravb-rcar-gen2";
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp8_clks R8A7794_CLK_ETHERAVB>;
power-domains = <&cpg_clocks>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
/* The memory map in the User's Manual maps the cores to bus numbers */ /* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c@e6508000 { i2c0: i2c@e6508000 {
compatible = "renesas,i2c-r8a7794"; compatible = "renesas,i2c-r8a7794";
...@@ -681,7 +701,7 @@ vin1: video@e6ef1000 { ...@@ -681,7 +701,7 @@ vin1: video@e6ef1000 {
}; };
pci0: pci@ee090000 { pci0: pci@ee090000 {
compatible = "renesas,pci-r8a7794"; compatible = "renesas,pci-r8a7794", "renesas,pci-rcar-gen2";
device_type = "pci"; device_type = "pci";
reg = <0 0xee090000 0 0xc00>, reg = <0 0xee090000 0 0xc00>,
<0 0xee080000 0 0x1100>; <0 0xee080000 0 0x1100>;
...@@ -716,7 +736,7 @@ usb@0,2 { ...@@ -716,7 +736,7 @@ usb@0,2 {
}; };
pci1: pci@ee0d0000 { pci1: pci@ee0d0000 {
compatible = "renesas,pci-r8a7794"; compatible = "renesas,pci-r8a7794", "renesas,pci-rcar-gen2";
device_type = "pci"; device_type = "pci";
reg = <0 0xee0d0000 0 0xc00>, reg = <0 0xee0d0000 0 0xc00>,
<0 0xee0c0000 0 0x1100>; <0 0xee0c0000 0 0x1100>;
...@@ -1104,13 +1124,14 @@ R8A7794_CLK_SCIF0 R8A7794_CLK_DU0 ...@@ -1104,13 +1124,14 @@ R8A7794_CLK_SCIF0 R8A7794_CLK_DU0
mstp8_clks: mstp8_clks@e6150990 { mstp8_clks: mstp8_clks@e6150990 {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
clocks = <&zg_clk>, <&zg_clk>, <&p_clk>; clocks = <&zg_clk>, <&zg_clk>, <&hp_clk>, <&p_clk>;
#clock-cells = <1>; #clock-cells = <1>;
clock-indices = < clock-indices = <
R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 R8A7794_CLK_ETHER R8A7794_CLK_VIN1 R8A7794_CLK_VIN0
R8A7794_CLK_ETHERAVB R8A7794_CLK_ETHER
>; >;
clock-output-names = clock-output-names =
"vin1", "vin0", "ether"; "vin1", "vin0", "etheravb", "ether";
}; };
mstp9_clks: mstp9_clks@e6150994 { mstp9_clks: mstp9_clks@e6150994 {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
......
...@@ -84,6 +84,7 @@ ...@@ -84,6 +84,7 @@
/* MSTP8 */ /* MSTP8 */
#define R8A7794_CLK_VIN1 10 #define R8A7794_CLK_VIN1 10
#define R8A7794_CLK_VIN0 11 #define R8A7794_CLK_VIN0 11
#define R8A7794_CLK_ETHERAVB 12
#define R8A7794_CLK_ETHER 13 #define R8A7794_CLK_ETHER 13
/* MSTP9 */ /* MSTP9 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment