Commit ca82a746 authored by Monk Liu's avatar Monk Liu Committed by Alex Deucher

drm/amdgpu:change sequence of SDMA v4 init

must set minor_update.enable before write smaller value
to wptr/doorbell, so for sriov we need set that register
bit in hw_init period.

this could fix the SDMA ring test fail after guest reboot
Signed-off-by: default avatarMonk Liu <Monk.Liu@amd.com>
Reviewed-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent e09706f4
......@@ -560,8 +560,14 @@ static int sdma_v4_0_gfx_resume(struct amdgpu_device *adev)
WREG32(sdma_v4_0_get_reg_offset(i, mmSDMA0_GFX_RB_BASE_HI), ring->gpu_addr >> 40);
ring->wptr = 0;
/* before programing wptr to a less value, need set minor_ptr_update first */
WREG32(sdma_v4_0_get_reg_offset(i, mmSDMA0_GFX_MINOR_PTR_UPDATE), 1);
if (!amdgpu_sriov_vf(adev)) { /* only bare-metal use register write for wptr */
WREG32(sdma_v4_0_get_reg_offset(i, mmSDMA0_GFX_RB_WPTR), lower_32_bits(ring->wptr) << 2);
WREG32(sdma_v4_0_get_reg_offset(i, mmSDMA0_GFX_RB_WPTR_HI), upper_32_bits(ring->wptr) << 2);
}
doorbell = RREG32(sdma_v4_0_get_reg_offset(i, mmSDMA0_GFX_DOORBELL));
doorbell_offset = RREG32(sdma_v4_0_get_reg_offset(i, mmSDMA0_GFX_DOORBELL_OFFSET));
......@@ -577,15 +583,23 @@ static int sdma_v4_0_gfx_resume(struct amdgpu_device *adev)
WREG32(sdma_v4_0_get_reg_offset(i, mmSDMA0_GFX_DOORBELL_OFFSET), doorbell_offset);
nbio_v6_1_sdma_doorbell_range(adev, i, ring->use_doorbell, ring->doorbell_index);
if (amdgpu_sriov_vf(adev))
sdma_v4_0_ring_set_wptr(ring);
/* set minor_ptr_update to 0 after wptr programed */
WREG32(sdma_v4_0_get_reg_offset(i, mmSDMA0_GFX_MINOR_PTR_UPDATE), 0);
/* set utc l1 enable flag always to 1 */
temp = RREG32(sdma_v4_0_get_reg_offset(i, mmSDMA0_CNTL));
temp = REG_SET_FIELD(temp, SDMA0_CNTL, UTC_L1_ENABLE, 1);
WREG32(sdma_v4_0_get_reg_offset(i, mmSDMA0_CNTL), temp);
if (!amdgpu_sriov_vf(adev)) {
/* unhalt engine */
temp = RREG32(sdma_v4_0_get_reg_offset(i, mmSDMA0_F32_CNTL));
temp = REG_SET_FIELD(temp, SDMA0_F32_CNTL, HALT, 0);
WREG32(sdma_v4_0_get_reg_offset(i, mmSDMA0_F32_CNTL), temp);
}
/* enable DMA RB */
rb_cntl = REG_SET_FIELD(rb_cntl, SDMA0_GFX_RB_CNTL, RB_ENABLE, 1);
......@@ -601,6 +615,11 @@ static int sdma_v4_0_gfx_resume(struct amdgpu_device *adev)
ring->ready = true;
if (amdgpu_sriov_vf(adev)) { /* bare-metal sequence doesn't need below to lines */
sdma_v4_0_ctx_switch_enable(adev, true);
sdma_v4_0_enable(adev, true);
}
r = amdgpu_ring_test_ring(ring);
if (r) {
ring->ready = false;
......@@ -671,8 +690,6 @@ static int sdma_v4_0_load_microcode(struct amdgpu_device *adev)
(adev->sdma.instance[i].fw->data +
le32_to_cpu(hdr->header.ucode_array_offset_bytes));
sdma_v4_0_print_ucode_regs(adev);
WREG32(sdma_v4_0_get_reg_offset(i, mmSDMA0_UCODE_ADDR), 0);
......@@ -699,10 +716,10 @@ static int sdma_v4_0_load_microcode(struct amdgpu_device *adev)
*/
static int sdma_v4_0_start(struct amdgpu_device *adev)
{
int r;
int r = 0;
if (amdgpu_sriov_vf(adev)) {
/* disable RB and halt engine */
sdma_v4_0_ctx_switch_enable(adev, false);
sdma_v4_0_enable(adev, false);
/* set RB registers */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment