Commit caab3147 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "Three driver bugfixes for I2C. Buisness as usual"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mediatek: Fix apdma and i2c hand-shake timeout
  i2c: i801: Fix the i2c-mux gpiod_lookup_table not being properly terminated
  i2c: sprd: use a specific timeout to avoid system hang up issue
parents 6bae85bd 05f6f727
......@@ -1449,7 +1449,7 @@ static int i801_add_mux(struct i801_priv *priv)
/* Register GPIO descriptor lookup table */
lookup = devm_kzalloc(dev,
struct_size(lookup, table, mux_config->n_gpios),
struct_size(lookup, table, mux_config->n_gpios + 1),
GFP_KERNEL);
if (!lookup)
return -ENOMEM;
......
......@@ -38,6 +38,7 @@
#define I2C_IO_CONFIG_OPEN_DRAIN 0x0003
#define I2C_IO_CONFIG_PUSH_PULL 0x0000
#define I2C_SOFT_RST 0x0001
#define I2C_HANDSHAKE_RST 0x0020
#define I2C_FIFO_ADDR_CLR 0x0001
#define I2C_DELAY_LEN 0x0002
#define I2C_TIME_CLR_VALUE 0x0000
......@@ -45,6 +46,7 @@
#define I2C_WRRD_TRANAC_VALUE 0x0002
#define I2C_RD_TRANAC_VALUE 0x0001
#define I2C_SCL_MIS_COMP_VALUE 0x0000
#define I2C_CHN_CLR_FLAG 0x0000
#define I2C_DMA_CON_TX 0x0000
#define I2C_DMA_CON_RX 0x0001
......@@ -54,7 +56,9 @@
#define I2C_DMA_START_EN 0x0001
#define I2C_DMA_INT_FLAG_NONE 0x0000
#define I2C_DMA_CLR_FLAG 0x0000
#define I2C_DMA_WARM_RST 0x0001
#define I2C_DMA_HARD_RST 0x0002
#define I2C_DMA_HANDSHAKE_RST 0x0004
#define MAX_SAMPLE_CNT_DIV 8
#define MAX_STEP_CNT_DIV 64
......@@ -475,11 +479,24 @@ static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
{
u16 control_reg;
if (i2c->dev_comp->dma_sync) {
writel(I2C_DMA_WARM_RST, i2c->pdmabase + OFFSET_RST);
udelay(10);
writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST);
udelay(10);
writel(I2C_DMA_HANDSHAKE_RST | I2C_DMA_HARD_RST,
i2c->pdmabase + OFFSET_RST);
mtk_i2c_writew(i2c, I2C_HANDSHAKE_RST | I2C_SOFT_RST,
OFFSET_SOFTRESET);
udelay(10);
writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST);
mtk_i2c_writew(i2c, I2C_CHN_CLR_FLAG, OFFSET_SOFTRESET);
} else {
writel(I2C_DMA_HARD_RST, i2c->pdmabase + OFFSET_RST);
udelay(50);
writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST);
mtk_i2c_writew(i2c, I2C_SOFT_RST, OFFSET_SOFTRESET);
}
/* Set ioconfig */
if (i2c->use_push_pull)
......
......@@ -72,6 +72,8 @@
/* timeout (ms) for pm runtime autosuspend */
#define SPRD_I2C_PM_TIMEOUT 1000
/* timeout (ms) for transfer message */
#define I2C_XFER_TIMEOUT 1000
/* SPRD i2c data structure */
struct sprd_i2c {
......@@ -244,6 +246,7 @@ static int sprd_i2c_handle_msg(struct i2c_adapter *i2c_adap,
struct i2c_msg *msg, bool is_last_msg)
{
struct sprd_i2c *i2c_dev = i2c_adap->algo_data;
unsigned long time_left;
i2c_dev->msg = msg;
i2c_dev->buf = msg->buf;
......@@ -273,7 +276,10 @@ static int sprd_i2c_handle_msg(struct i2c_adapter *i2c_adap,
sprd_i2c_opt_start(i2c_dev);
wait_for_completion(&i2c_dev->complete);
time_left = wait_for_completion_timeout(&i2c_dev->complete,
msecs_to_jiffies(I2C_XFER_TIMEOUT));
if (!time_left)
return -ETIMEDOUT;
return i2c_dev->err;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment