[media] smiapp: Make PLL flags separate from regular quirk flags

It doesn't make sense to just copy the information to the PLL flags. Add a
new fields for the quirks to contain the PLL flags.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/i2c/smiapp/smiapp-core.c

@@ -2617,12 +2617,11 @@ static int smiapp_registered(struct v4l2_subdev *subdev)
 	pll->bus_type = SMIAPP_PLL_BUS_TYPE_CSI2;
 	pll->csi2.lanes = sensor->platform_data->lanes;
 	pll->ext_clk_freq_hz = sensor->platform_data->ext_clk;
+	if (sensor->minfo.quirk)
+		pll->flags = sensor->minfo.quirk->pll_flags;
 	/* Profile 0 sensors have no separate OP clock branch. */
 	if (sensor->minfo.smiapp_profile == SMIAPP_PROFILE_0)
 		pll->flags |= SMIAPP_PLL_FLAG_NO_OP_CLOCKS;
-	if (smiapp_needs_quirk(sensor,
-			       SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE))
-		pll->flags |= SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE;
 	pll->scale_n = sensor->limits[SMIAPP_LIMIT_SCALER_N_MIN];
 
 	rval = smiapp_update_mode(sensor);

drivers/media/i2c/smiapp/smiapp-quirk.c

@@ -225,7 +225,7 @@ const struct smiapp_quirk smiapp_jt8ev1_quirk = {
 	.post_poweron = jt8ev1_post_poweron,
 	.pre_streamon = jt8ev1_pre_streamon,
 	.post_streamoff = jt8ev1_post_streamoff,
-	.flags = SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE,
+	.pll_flags = SMIAPP_PLL_FLAG_OP_PIX_CLOCK_PER_LANE,
 };
 
 static int tcm8500md_limits(struct smiapp_sensor *sensor)

drivers/media/i2c/smiapp/smiapp-quirk.h

@@ -42,11 +42,10 @@ struct smiapp_quirk {
 	int (*pre_streamon)(struct smiapp_sensor *sensor);
 	int (*post_streamoff)(struct smiapp_sensor *sensor);
 	unsigned long flags;
+	unsigned long pll_flags;
 };
 
-/* op pix clock is for all lanes in total normally */
-#define SMIAPP_QUIRK_FLAG_OP_PIX_CLOCK_PER_LANE			(1 << 0)
-#define SMIAPP_QUIRK_FLAG_8BIT_READ_ONLY			(1 << 1)
+#define SMIAPP_QUIRK_FLAG_8BIT_READ_ONLY			(1 << 0)
 
 struct smiapp_reg_8 {
 	u16 reg;