octeontx2-nicvf: add ndo_set_rx_mode support for multicast & promisc

Add ndo_set_rx_mode callback handler to configure promisc, multicast and
allmulti options for VF driver. Also, modified PF driver ndo_set_rx_mode
handler to support multicast and promisc mode independently.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c

@@ -395,6 +395,42 @@ static netdev_tx_t otx2vf_xmit(struct sk_buff *skb, struct net_device *netdev)
 	return NETDEV_TX_OK;
 }
 
+static void otx2vf_set_rx_mode(struct net_device *netdev)
+{
+	struct otx2_nic *vf = netdev_priv(netdev);
+
+	queue_work(vf->otx2_wq, &vf->rx_mode_work);
+}
+
+static void otx2vf_do_set_rx_mode(struct work_struct *work)
+{
+	struct otx2_nic *vf = container_of(work, struct otx2_nic, rx_mode_work);
+	struct net_device *netdev = vf->netdev;
+	unsigned int flags = netdev->flags;
+	struct nix_rx_mode *req;
+
+	mutex_lock(&vf->mbox.lock);
+
+	req = otx2_mbox_alloc_msg_nix_set_rx_mode(&vf->mbox);
+	if (!req) {
+		mutex_unlock(&vf->mbox.lock);
+		return;
+	}
+
+	req->mode = NIX_RX_MODE_UCAST;
+
+	if (flags & IFF_PROMISC)
+		req->mode |= NIX_RX_MODE_PROMISC;
+	if (flags & (IFF_ALLMULTI | IFF_MULTICAST))
+		req->mode |= NIX_RX_MODE_ALLMULTI;
+
+	req->mode |= NIX_RX_MODE_USE_MCE;
+
+	otx2_sync_mbox_msg(&vf->mbox);
+
+	mutex_unlock(&vf->mbox.lock);
+}
+
 static int otx2vf_change_mtu(struct net_device *netdev, int new_mtu)
 {
 	bool if_up = netif_running(netdev);
@@ -432,12 +468,24 @@ static const struct net_device_ops otx2vf_netdev_ops = {
 	.ndo_open = otx2vf_open,
 	.ndo_stop = otx2vf_stop,
 	.ndo_start_xmit = otx2vf_xmit,
+	.ndo_set_rx_mode = otx2vf_set_rx_mode,
 	.ndo_set_mac_address = otx2_set_mac_address,
 	.ndo_change_mtu = otx2vf_change_mtu,
 	.ndo_get_stats64 = otx2_get_stats64,
 	.ndo_tx_timeout = otx2_tx_timeout,
 };
 
+static int otx2_wq_init(struct otx2_nic *vf)
+{
+	vf->otx2_wq = create_singlethread_workqueue("otx2vf_wq");
+	if (!vf->otx2_wq)
+		return -ENOMEM;
+
+	INIT_WORK(&vf->rx_mode_work, otx2vf_do_set_rx_mode);
+	INIT_WORK(&vf->reset_task, otx2vf_reset_task);
+	return 0;
+}
+
 static int otx2vf_realloc_msix_vectors(struct otx2_nic *vf)
 {
 	struct otx2_hw *hw = &vf->hw;
@@ -588,8 +636,6 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	netdev->min_mtu = OTX2_MIN_MTU;
 	netdev->max_mtu = otx2_get_max_mtu(vf);
 
-	INIT_WORK(&vf->reset_task, otx2vf_reset_task);
-
 	/* To distinguish, for LBK VFs set netdev name explicitly */
 	if (is_otx2_lbkvf(vf->pdev)) {
 		int n;
@@ -606,6 +652,10 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto err_detach_rsrc;
 	}
 
+	err = otx2_wq_init(vf);
+	if (err)
+		goto err_unreg_netdev;
+
 	otx2vf_set_ethtool_ops(netdev);
 
 	/* Enable pause frames by default */
@@ -614,6 +664,8 @@ static int otx2vf_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	return 0;
 
+err_unreg_netdev:
+	unregister_netdev(netdev);
 err_detach_rsrc:
 	if (hw->lmt_base)
 		iounmap(hw->lmt_base);
@@ -644,6 +696,8 @@ static void otx2vf_remove(struct pci_dev *pdev)
 
 	cancel_work_sync(&vf->reset_task);
 	unregister_netdev(netdev);
+	if (vf->otx2_wq)
+		destroy_workqueue(vf->otx2_wq);
 	otx2vf_disable_mbox_intr(vf);
 	otx2_detach_resources(&vf->mbox);