ice: Refactor interrupt tracking
Currently we have two MSI-x (IRQ) trackers, one for OS requested MSI-x entries (sw_irq_tracker) and one for hardware MSI-x vectors (hw_irq_tracker). Generally the sw_irq_tracker has less entries than the hw_irq_tracker because the hw_irq_tracker has entries equal to the max allowed MSI-x per PF and the sw_irq_tracker is mainly the minimum (non SR-IOV portion of the vectors, kernel granted IRQs). All of the non SR-IOV portions of the driver (i.e. LAN queues, RDMA queues, OICR, etc.) take at least one of each type of tracker resource. SR-IOV only grabs entries from the hw_irq_tracker. There are a few issues with this approach that can be seen when doing any kind of device reconfiguration (i.e. ethtool -L, SR-IOV, etc.). One of them being, any time the driver creates an ice_q_vector and associates it to a LAN queue pair it will grab and use one entry from the hw_irq_tracker and one from the sw_irq_tracker. If the indices on these does not match it will cause a Tx timeout, which will cause a reset and then the indices will match up again and traffic will resume. The mismatched indices come from the trackers not being the same size and/or the search_hint in the two trackers not being equal. Another reason for the refactor is the co-existence of features with SR-IOV. If SR-IOV is enabled and the interrupts are taken from the end of the sw_irq_tracker then other features can no longer use this space because the hardware has now given the remaining interrupts to SR-IOV. This patch reworks how we track MSI-x vectors by removing the hw_irq_tracker completely and instead MSI-x resources needed for SR-IOV are determined all at once instead of per VF. This can be done because when creating VFs we know how many are wanted and how many MSI-x vectors each VF needs. This also allows us to start using MSI-x resources from the end of the PF's allowed MSI-x vectors so we are less likely to use entries needed for other features (i.e. RDMA, L2 Offload, etc). This patch also reworks the ice_res_tracker structure by removing the search_hint and adding a new member - "end". Instead of having a search_hint we will always search from 0. The new member, "end", will be used to manipulate the end of the ice_res_tracker (specifically sw_irq_tracker) during runtime based on MSI-x vectors needed by SR-IOV. In the normal case, the end of ice_res_tracker will be equal to the ice_res_tracker's num_entries. The sriov_base_vector member was added to the PF structure. It is used to represent the starting MSI-x index of all the needed MSI-x vectors for all SR-IOV VFs. Depending on how many MSI-x are needed, SR-IOV may have to take resources from the sw_irq_tracker. This is done by setting the sw_irq_tracker->end equal to the pf->sriov_base_vector. When all SR-IOV VFs are removed then the sw_irq_tracker->end is reset back to sw_irq_tracker->num_entries. The sriov_base_vector, along with the VF's number of MSI-x (pf->num_vf_msix), vf_id, and the base MSI-x index on the PF (pf->hw.func_caps.common_cap.msix_vector_first_id), is used to calculate the first HW absolute MSI-x index for each VF, which is used to write to the VPINT_ALLOC[_PCI] and GLINT_VECT2FUNC registers to program the VFs MSI-x PCI configuration bits. Also, the sriov_base_vector is used along with VF's num_vf_msix, vf_id, and q_vector->v_idx to determine the MSI-x register index (used for writing to GLINT_DYN_CTL) within the PF's space. Interrupt changes removed any references to hw_base_vector, hw_oicr_idx, and hw_irq_tracker. Only sw_base_vector, sw_oicr_idx, and sw_irq_tracker variables remain. Change all of these by removing the "sw_" prefix to help avoid confusion with these variables and their use. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Showing
Please register or sign in to comment