Commit cc89c323 authored by Woojung Huh's avatar Woojung Huh Committed by David S. Miller

lan78xx: Use irq_domain for phy interrupt from USB Int. EP

To utilize phylib with interrupt fully than handling some of phy stuff in the MAC driver,
create irq_domain for USB interrupt EP of phy interrupt and
pass the irq number to phy_connect_direct() instead of PHY_IGNORE_INTERRUPT.

Idea comes from drivers/gpio/gpio-dl2.c
Signed-off-by: default avatarWoojung Huh <woojung.huh@microchip.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 2331ccc5
......@@ -30,13 +30,17 @@
#include <linux/ipv6.h>
#include <linux/mdio.h>
#include <net/ip6_checksum.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/irq.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/microchipphy.h>
#include "lan78xx.h"
#define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>"
#define DRIVER_DESC "LAN78XX USB 3.0 Gigabit Ethernet Devices"
#define DRIVER_NAME "lan78xx"
#define DRIVER_VERSION "1.0.4"
#define DRIVER_VERSION "1.0.5"
#define TX_TIMEOUT_JIFFIES (5 * HZ)
#define THROTTLE_JIFFIES (HZ / 8)
......@@ -89,6 +93,38 @@
/* statistic update interval (mSec) */
#define STAT_UPDATE_TIMER (1 * 1000)
/* defines interrupts from interrupt EP */
#define MAX_INT_EP (32)
#define INT_EP_INTEP (31)
#define INT_EP_OTP_WR_DONE (28)
#define INT_EP_EEE_TX_LPI_START (26)
#define INT_EP_EEE_TX_LPI_STOP (25)
#define INT_EP_EEE_RX_LPI (24)
#define INT_EP_MAC_RESET_TIMEOUT (23)
#define INT_EP_RDFO (22)
#define INT_EP_TXE (21)
#define INT_EP_USB_STATUS (20)
#define INT_EP_TX_DIS (19)
#define INT_EP_RX_DIS (18)
#define INT_EP_PHY (17)
#define INT_EP_DP (16)
#define INT_EP_MAC_ERR (15)
#define INT_EP_TDFU (14)
#define INT_EP_TDFO (13)
#define INT_EP_UTX (12)
#define INT_EP_GPIO_11 (11)
#define INT_EP_GPIO_10 (10)
#define INT_EP_GPIO_9 (9)
#define INT_EP_GPIO_8 (8)
#define INT_EP_GPIO_7 (7)
#define INT_EP_GPIO_6 (6)
#define INT_EP_GPIO_5 (5)
#define INT_EP_GPIO_4 (4)
#define INT_EP_GPIO_3 (3)
#define INT_EP_GPIO_2 (2)
#define INT_EP_GPIO_1 (1)
#define INT_EP_GPIO_0 (0)
static const char lan78xx_gstrings[][ETH_GSTRING_LEN] = {
"RX FCS Errors",
"RX Alignment Errors",
......@@ -296,6 +332,15 @@ struct statstage {
struct lan78xx_statstage64 curr_stat;
};
struct irq_domain_data {
struct irq_domain *irqdomain;
unsigned int phyirq;
struct irq_chip *irqchip;
irq_flow_handler_t irq_handler;
u32 irqenable;
struct mutex irq_lock; /* for irq bus access */
};
struct lan78xx_net {
struct net_device *net;
struct usb_device *udev;
......@@ -351,6 +396,8 @@ struct lan78xx_net {
int delta;
struct statstage stats;
struct irq_domain_data domain_data;
};
/* use ethtool to change the level for any given device */
......@@ -1096,11 +1143,6 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
int ladv, radv, ret;
u32 buf;
/* clear PHY interrupt status */
ret = phy_read(phydev, LAN88XX_INT_STS);
if (unlikely(ret < 0))
return -EIO;
/* clear LAN78xx interrupt status */
ret = lan78xx_write_reg(dev, INT_STS, INT_STS_PHY_INT_);
if (unlikely(ret < 0))
......@@ -1120,16 +1162,12 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
if (unlikely(ret < 0))
return -EIO;
phy_mac_interrupt(phydev, 0);
del_timer(&dev->stat_monitor);
} else if (phydev->link && !dev->link_on) {
dev->link_on = true;
phy_ethtool_ksettings_get(phydev, &ecmd);
ret = phy_read(phydev, LAN88XX_INT_STS);
if (dev->udev->speed == USB_SPEED_SUPER) {
if (ecmd.base.speed == 1000) {
/* disable U2 */
......@@ -1163,7 +1201,6 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
ret = lan78xx_update_flowcontrol(dev, ecmd.base.duplex, ladv,
radv);
phy_mac_interrupt(phydev, 1);
if (!timer_pending(&dev->stat_monitor)) {
dev->delta = 1;
......@@ -1203,6 +1240,9 @@ static void lan78xx_status(struct lan78xx_net *dev, struct urb *urb)
if (intdata & INT_ENP_PHY_INT) {
netif_dbg(dev, link, dev->net, "PHY INTR: 0x%08x\n", intdata);
lan78xx_defer_kevent(dev, EVENT_LINK_RESET);
if (dev->domain_data.phyirq > 0)
generic_handle_irq(dev->domain_data.phyirq);
} else
netdev_warn(dev->net,
"unexpected interrupt: 0x%08x\n", intdata);
......@@ -1844,6 +1884,127 @@ static void lan78xx_link_status_change(struct net_device *net)
}
}
static int irq_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hwirq)
{
struct irq_domain_data *data = d->host_data;
irq_set_chip_data(irq, data);
irq_set_chip_and_handler(irq, data->irqchip, data->irq_handler);
irq_set_noprobe(irq);
return 0;
}
static void irq_unmap(struct irq_domain *d, unsigned int irq)
{
irq_set_chip_and_handler(irq, NULL, NULL);
irq_set_chip_data(irq, NULL);
}
static const struct irq_domain_ops chip_domain_ops = {
.map = irq_map,
.unmap = irq_unmap,
};
static void lan78xx_irq_mask(struct irq_data *irqd)
{
struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
data->irqenable &= ~BIT(irqd_to_hwirq(irqd));
}
static void lan78xx_irq_unmask(struct irq_data *irqd)
{
struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
data->irqenable |= BIT(irqd_to_hwirq(irqd));
}
static void lan78xx_irq_bus_lock(struct irq_data *irqd)
{
struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
mutex_lock(&data->irq_lock);
}
static void lan78xx_irq_bus_sync_unlock(struct irq_data *irqd)
{
struct irq_domain_data *data = irq_data_get_irq_chip_data(irqd);
struct lan78xx_net *dev =
container_of(data, struct lan78xx_net, domain_data);
u32 buf;
int ret;
/* call register access here because irq_bus_lock & irq_bus_sync_unlock
* are only two callbacks executed in non-atomic contex.
*/
ret = lan78xx_read_reg(dev, INT_EP_CTL, &buf);
if (buf != data->irqenable)
ret = lan78xx_write_reg(dev, INT_EP_CTL, data->irqenable);
mutex_unlock(&data->irq_lock);
}
static struct irq_chip lan78xx_irqchip = {
.name = "lan78xx-irqs",
.irq_mask = lan78xx_irq_mask,
.irq_unmask = lan78xx_irq_unmask,
.irq_bus_lock = lan78xx_irq_bus_lock,
.irq_bus_sync_unlock = lan78xx_irq_bus_sync_unlock,
};
static int lan78xx_setup_irq_domain(struct lan78xx_net *dev)
{
struct device_node *of_node;
struct irq_domain *irqdomain;
unsigned int irqmap = 0;
u32 buf;
int ret = 0;
of_node = dev->udev->dev.parent->of_node;
mutex_init(&dev->domain_data.irq_lock);
lan78xx_read_reg(dev, INT_EP_CTL, &buf);
dev->domain_data.irqenable = buf;
dev->domain_data.irqchip = &lan78xx_irqchip;
dev->domain_data.irq_handler = handle_simple_irq;
irqdomain = irq_domain_add_simple(of_node, MAX_INT_EP, 0,
&chip_domain_ops, &dev->domain_data);
if (irqdomain) {
/* create mapping for PHY interrupt */
irqmap = irq_create_mapping(irqdomain, INT_EP_PHY);
if (!irqmap) {
irq_domain_remove(irqdomain);
irqdomain = NULL;
ret = -EINVAL;
}
} else {
ret = -EINVAL;
}
dev->domain_data.irqdomain = irqdomain;
dev->domain_data.phyirq = irqmap;
return ret;
}
static void lan78xx_remove_irq_domain(struct lan78xx_net *dev)
{
if (dev->domain_data.phyirq > 0) {
irq_dispose_mapping(dev->domain_data.phyirq);
if (dev->domain_data.irqdomain)
irq_domain_remove(dev->domain_data.irqdomain);
}
dev->domain_data.phyirq = 0;
dev->domain_data.irqdomain = NULL;
}
static int lan78xx_phy_init(struct lan78xx_net *dev)
{
int ret;
......@@ -1856,15 +2017,12 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
return -EIO;
}
/* Enable PHY interrupts.
* We handle our own interrupt
*/
ret = phy_read(phydev, LAN88XX_INT_STS);
ret = phy_write(phydev, LAN88XX_INT_MASK,
LAN88XX_INT_MASK_MDINTPIN_EN_ |
LAN88XX_INT_MASK_LINK_CHANGE_);
phydev->irq = PHY_IGNORE_INTERRUPT;
/* if phyirq is not set, use polling mode in phylib */
if (dev->domain_data.phyirq > 0)
phydev->irq = dev->domain_data.phyirq;
else
phydev->irq = 0;
netdev_dbg(dev->net, "phydev->irq = %d\n", phydev->irq);
ret = phy_connect_direct(dev->net, phydev,
lan78xx_link_status_change,
......@@ -2255,11 +2413,6 @@ static int lan78xx_reset(struct lan78xx_net *dev)
buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_;
ret = lan78xx_write_reg(dev, MAC_CR, buf);
/* enable PHY interrupts */
ret = lan78xx_read_reg(dev, INT_EP_CTL, &buf);
buf |= INT_ENP_PHY_INT;
ret = lan78xx_write_reg(dev, INT_EP_CTL, buf);
ret = lan78xx_read_reg(dev, MAC_TX, &buf);
buf |= MAC_TX_TXEN_;
ret = lan78xx_write_reg(dev, MAC_TX, buf);
......@@ -2668,6 +2821,14 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf)
dev->net->hw_features = dev->net->features;
ret = lan78xx_setup_irq_domain(dev);
if (ret < 0) {
netdev_warn(dev->net,
"lan78xx_setup_irq_domain() failed : %d", ret);
kfree(pdata);
return ret;
}
/* Init all registers */
ret = lan78xx_reset(dev);
......@@ -2684,6 +2845,8 @@ static void lan78xx_unbind(struct lan78xx_net *dev, struct usb_interface *intf)
{
struct lan78xx_priv *pdata = (struct lan78xx_priv *)(dev->data[0]);
lan78xx_remove_irq_domain(dev);
lan78xx_remove_mdio(dev);
if (pdata) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment