Commit cd467299 authored by Dmitry Torokhov's avatar Dmitry Torokhov

Input: raydium_i2c_ts - do not ignore EPROBE_DEFER from gpiod_get_optional

We should not be ignoring -EPROBE_DEFER reported by
devm_gpiod_get_optional(), but report it as any other error to the upper
layers. While we are at it simplify check for the presence of reset GPIO
and instead of using IS_ERR_OR_NULL just use boolean.

Also do not return -ENOMEM from suspend handler when the device in
bootloader mode as that does not make sense and switch to -EBUSY instead.
Reported-by: default avatarGuenter Roeck <groeck@chromium.org>
Reviewed-by: default avatarGuenter Roeck <groeck@chromium.org>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 48a2b783
......@@ -930,7 +930,7 @@ static int raydium_i2c_power_on(struct raydium_data *ts)
{
int error;
if (IS_ERR_OR_NULL(ts->reset_gpio))
if (!ts->reset_gpio)
return 0;
gpiod_set_value_cansleep(ts->reset_gpio, 1);
......@@ -967,7 +967,7 @@ static void raydium_i2c_power_off(void *_data)
{
struct raydium_data *ts = _data;
if (!IS_ERR_OR_NULL(ts->reset_gpio)) {
if (ts->reset_gpio) {
gpiod_set_value_cansleep(ts->reset_gpio, 1);
regulator_disable(ts->vccio);
regulator_disable(ts->avdd);
......@@ -1018,12 +1018,11 @@ static int raydium_i2c_probe(struct i2c_client *client,
GPIOD_OUT_LOW);
if (IS_ERR(ts->reset_gpio)) {
error = PTR_ERR(ts->reset_gpio);
if (error != -EPROBE_DEFER) {
if (error != -EPROBE_DEFER)
dev_err(&client->dev,
"failed to get reset gpio: %d\n", error);
return error;
}
}
error = raydium_i2c_power_on(ts);
if (error)
......@@ -1138,7 +1137,7 @@ static int __maybe_unused raydium_i2c_suspend(struct device *dev)
/* Sleep is not available in BLDR recovery mode */
if (ts->boot_mode != RAYDIUM_TS_MAIN)
return -ENOMEM;
return -EBUSY;
disable_irq(client->irq);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment