Commit cd52c2a4 authored by Sudeep Holla's avatar Sudeep Holla

clk: add support for clocks provided by SCP(System Control Processor)

On some ARM based systems, a separate Cortex-M based System Control
Processor(SCP) provides the overall power, clock, reset and system
control. System Control and Power Interface(SCPI) Message Protocol
is defined for the communication between the Application Cores(AP)
and the SCP.

This patch adds support for the clocks provided by SCP using SCPI
protocol.
Signed-off-by: default avatarSudeep Holla <sudeep.holla@arm.com>
Reviewed-by: default avatarStephen Boyd <sboyd@codeaurora.org>
Cc: Mike Turquette <mturquette@baylibre.com>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jon Medhurst (Tixy) <tixy@linaro.org>
Cc: linux-clk@vger.kernel.org
parent 8cb7cf56
...@@ -9154,6 +9154,7 @@ M: Sudeep Holla <sudeep.holla@arm.com> ...@@ -9154,6 +9154,7 @@ M: Sudeep Holla <sudeep.holla@arm.com>
L: linux-arm-kernel@lists.infradead.org L: linux-arm-kernel@lists.infradead.org
S: Maintained S: Maintained
F: Documentation/devicetree/bindings/arm/arm,scpi.txt F: Documentation/devicetree/bindings/arm/arm,scpi.txt
F: drivers/clk/clk-scpi.c
F: drivers/firmware/arm_scpi.c F: drivers/firmware/arm_scpi.c
F: include/linux/scpi_protocol.h F: include/linux/scpi_protocol.h
......
...@@ -59,6 +59,16 @@ config COMMON_CLK_RK808 ...@@ -59,6 +59,16 @@ config COMMON_CLK_RK808
clocked at 32KHz each. Clkout1 is always on, Clkout2 can off clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
by control register. by control register.
config COMMON_CLK_SCPI
tristate "Clock driver controlled via SCPI interface"
depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
---help---
This driver provides support for clocks that are controlled
by firmware that implements the SCPI interface.
This driver uses SCPI Message Protocol to interact with the
firmware providing all the clock controls.
config COMMON_CLK_SI5351 config COMMON_CLK_SI5351
tristate "Clock driver for SiLabs 5351A/B/C" tristate "Clock driver for SiLabs 5351A/B/C"
depends on I2C depends on I2C
......
...@@ -36,6 +36,7 @@ obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o ...@@ -36,6 +36,7 @@ obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o
obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o
obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o
obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o
obj-$(CONFIG_COMMON_CLK_SCPI) += clk-scpi.o
obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o
obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o
......
/*
* System Control and Power Interface (SCPI) Protocol based clock driver
*
* Copyright (C) 2015 ARM Ltd.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/clk-provider.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/scpi_protocol.h>
struct scpi_clk {
u32 id;
struct clk_hw hw;
struct scpi_dvfs_info *info;
struct scpi_ops *scpi_ops;
};
#define to_scpi_clk(clk) container_of(clk, struct scpi_clk, hw)
static unsigned long scpi_clk_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct scpi_clk *clk = to_scpi_clk(hw);
return clk->scpi_ops->clk_get_val(clk->id);
}
static long scpi_clk_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
/*
* We can't figure out what rate it will be, so just return the
* rate back to the caller. scpi_clk_recalc_rate() will be called
* after the rate is set and we'll know what rate the clock is
* running at then.
*/
return rate;
}
static int scpi_clk_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct scpi_clk *clk = to_scpi_clk(hw);
return clk->scpi_ops->clk_set_val(clk->id, rate);
}
static const struct clk_ops scpi_clk_ops = {
.recalc_rate = scpi_clk_recalc_rate,
.round_rate = scpi_clk_round_rate,
.set_rate = scpi_clk_set_rate,
};
/* find closest match to given frequency in OPP table */
static int __scpi_dvfs_round_rate(struct scpi_clk *clk, unsigned long rate)
{
int idx;
u32 fmin = 0, fmax = ~0, ftmp;
const struct scpi_opp *opp = clk->info->opps;
for (idx = 0; idx < clk->info->count; idx++, opp++) {
ftmp = opp->freq;
if (ftmp >= (u32)rate) {
if (ftmp <= fmax)
fmax = ftmp;
break;
} else if (ftmp >= fmin) {
fmin = ftmp;
}
}
return fmax != ~0 ? fmax : fmin;
}
static unsigned long scpi_dvfs_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct scpi_clk *clk = to_scpi_clk(hw);
int idx = clk->scpi_ops->dvfs_get_idx(clk->id);
const struct scpi_opp *opp;
if (idx < 0)
return 0;
opp = clk->info->opps + idx;
return opp->freq;
}
static long scpi_dvfs_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
struct scpi_clk *clk = to_scpi_clk(hw);
return __scpi_dvfs_round_rate(clk, rate);
}
static int __scpi_find_dvfs_index(struct scpi_clk *clk, unsigned long rate)
{
int idx, max_opp = clk->info->count;
const struct scpi_opp *opp = clk->info->opps;
for (idx = 0; idx < max_opp; idx++, opp++)
if (opp->freq == rate)
return idx;
return -EINVAL;
}
static int scpi_dvfs_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct scpi_clk *clk = to_scpi_clk(hw);
int ret = __scpi_find_dvfs_index(clk, rate);
if (ret < 0)
return ret;
return clk->scpi_ops->dvfs_set_idx(clk->id, (u8)ret);
}
static const struct clk_ops scpi_dvfs_ops = {
.recalc_rate = scpi_dvfs_recalc_rate,
.round_rate = scpi_dvfs_round_rate,
.set_rate = scpi_dvfs_set_rate,
};
static const struct of_device_id scpi_clk_match[] = {
{ .compatible = "arm,scpi-dvfs-clocks", .data = &scpi_dvfs_ops, },
{ .compatible = "arm,scpi-variable-clocks", .data = &scpi_clk_ops, },
{}
};
static struct clk *
scpi_clk_ops_init(struct device *dev, const struct of_device_id *match,
struct scpi_clk *sclk, const char *name)
{
struct clk_init_data init;
struct clk *clk;
unsigned long min = 0, max = 0;
init.name = name;
init.flags = CLK_IS_ROOT;
init.num_parents = 0;
init.ops = match->data;
sclk->hw.init = &init;
sclk->scpi_ops = get_scpi_ops();
if (init.ops == &scpi_dvfs_ops) {
sclk->info = sclk->scpi_ops->dvfs_get_info(sclk->id);
if (IS_ERR(sclk->info))
return NULL;
} else if (init.ops == &scpi_clk_ops) {
if (sclk->scpi_ops->clk_get_range(sclk->id, &min, &max) || !max)
return NULL;
} else {
return NULL;
}
clk = devm_clk_register(dev, &sclk->hw);
if (!IS_ERR(clk) && max)
clk_hw_set_rate_range(&sclk->hw, min, max);
return clk;
}
struct scpi_clk_data {
struct scpi_clk **clk;
unsigned int clk_num;
};
static struct clk *
scpi_of_clk_src_get(struct of_phandle_args *clkspec, void *data)
{
struct scpi_clk *sclk;
struct scpi_clk_data *clk_data = data;
unsigned int idx = clkspec->args[0], count;
for (count = 0; count < clk_data->clk_num; count++) {
sclk = clk_data->clk[count];
if (idx == sclk->id)
return sclk->hw.clk;
}
return ERR_PTR(-EINVAL);
}
static int scpi_clk_add(struct device *dev, struct device_node *np,
const struct of_device_id *match)
{
struct clk **clks;
int idx, count;
struct scpi_clk_data *clk_data;
count = of_property_count_strings(np, "clock-output-names");
if (count < 0) {
dev_err(dev, "%s: invalid clock output count\n", np->name);
return -EINVAL;
}
clk_data = devm_kmalloc(dev, sizeof(*clk_data), GFP_KERNEL);
if (!clk_data)
return -ENOMEM;
clk_data->clk_num = count;
clk_data->clk = devm_kcalloc(dev, count, sizeof(*clk_data->clk),
GFP_KERNEL);
if (!clk_data->clk)
return -ENOMEM;
clks = devm_kcalloc(dev, count, sizeof(*clks), GFP_KERNEL);
if (!clks)
return -ENOMEM;
for (idx = 0; idx < count; idx++) {
struct scpi_clk *sclk;
const char *name;
u32 val;
sclk = devm_kzalloc(dev, sizeof(*sclk), GFP_KERNEL);
if (!sclk)
return -ENOMEM;
if (of_property_read_string_index(np, "clock-output-names",
idx, &name)) {
dev_err(dev, "invalid clock name @ %s\n", np->name);
return -EINVAL;
}
if (of_property_read_u32_index(np, "clock-indices",
idx, &val)) {
dev_err(dev, "invalid clock index @ %s\n", np->name);
return -EINVAL;
}
sclk->id = val;
clks[idx] = scpi_clk_ops_init(dev, match, sclk, name);
if (IS_ERR_OR_NULL(clks[idx]))
dev_err(dev, "failed to register clock '%s'\n", name);
else
dev_dbg(dev, "Registered clock '%s'\n", name);
clk_data->clk[idx] = sclk;
}
return of_clk_add_provider(np, scpi_of_clk_src_get, clk_data);
}
static int scpi_clocks_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *child, *np = dev->of_node;
for_each_available_child_of_node(np, child)
of_clk_del_provider(np);
return 0;
}
static int scpi_clocks_probe(struct platform_device *pdev)
{
int ret;
struct device *dev = &pdev->dev;
struct device_node *child, *np = dev->of_node;
const struct of_device_id *match;
if (!get_scpi_ops())
return -ENXIO;
for_each_available_child_of_node(np, child) {
match = of_match_node(scpi_clk_match, child);
if (!match)
continue;
ret = scpi_clk_add(dev, child, match);
if (ret) {
scpi_clocks_remove(pdev);
return ret;
}
}
return 0;
}
static const struct of_device_id scpi_clocks_ids[] = {
{ .compatible = "arm,scpi-clocks", },
{}
};
MODULE_DEVICE_TABLE(of, scpi_clocks_ids);
static struct platform_driver scpi_clocks_driver = {
.driver = {
.name = "scpi_clocks",
.of_match_table = scpi_clocks_ids,
},
.probe = scpi_clocks_probe,
.remove = scpi_clocks_remove,
};
module_platform_driver(scpi_clocks_driver);
MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
MODULE_DESCRIPTION("ARM SCPI clock driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment