Skip to content

L
linux
Commit cf3c34c8 authored by Trent Piepho's avatar Trent Piepho Committed by Mauro Carvalho Chehab
Browse files
Options

V4L/DVB (5391): Saa7134: Clean up printk()s 

Change some debug messages from printk() to dprintk().

Add KERN_WARNING and KERN_ERR level indicators to other printk()s that
lacked them.

Format printk lines with consistent ("%s/dvb: ", dev->name) prefix.

Fixed dprintk macro, which had an if with no else that wasn't protected
with a do {} while(0) block.  That leads to "if(...) dprintk(); else" not
doing what one would expect.
Signed-off-by: default avatarTrent Piepho <xyzzy@speakeasy.org>
Acked-by: default avatarHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 3b35b4b3
Show whitespace changes
Inline Side-by-side
Showing with 26 additions and 19 deletions
drivers/media/video/saa7134/saa7134-dvb.c
View file @ cf3c34c8
......@@ -60,8 +60,12 @@ static int debug = 0;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off).");
#define dprintk(fmt, arg...) if (debug) \
printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg)
#define dprintk(fmt, arg...) do { if (debug) \
printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0)
/* Print a warning */
#define wprintk(fmt, arg...) \
printk(KERN_WARNING "%s/dvb: " fmt, dev->name, ## arg)
/* ------------------------------------------------------------------
* mt352 based DVB-T cards
......@@ -87,8 +91,7 @@ static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
udelay(10);
ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27);
printk("%s: %s %s\n", dev->name, __FUNCTION__,
ok ? "on" : "off");
dprintk("%s %s\n", __FUNCTION__, ok ? "on" : "off");
if (!ok)
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
......@@ -108,7 +111,7 @@ static int mt352_pinnacle_init(struct dvb_frontend* fe)
static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 };
struct saa7134_dev *dev= fe->dvb->priv;
printk("%s: %s called\n",dev->name,__FUNCTION__);
dprintk("%s called\n", __FUNCTION__);
mt352_write(fe, clock_config, sizeof(clock_config));
udelay(200);
......@@ -292,7 +295,8 @@ static int philips_tda6651_pll_set(struct dvb_frontend *fe, struct dvb_frontend_
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) {
printk("%s/dvb: could not write to tuner at addr: 0x%02x\n",dev->name, addr << 1);
wprintk("could not write to tuner at addr: 0x%02x\n",
addr << 1);
return -EIO;
}
msleep(1);
......@@ -562,7 +566,8 @@ static int philips_fmd1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);
if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) {
printk("%s/dvb: could not write to tuner at addr: 0x%02x\n",dev->name, addr << 1);
wprintk("could not write to tuner at addr: 0x%02x\n",
addr << 1);
return -EIO;
}
return 0;
......@@ -609,7 +614,8 @@ static void philips_tda827x_lna_gain(struct dvb_frontend *fe, int high)
saa7134_set_gpio(dev, 22, 0);
GP00_LEV[1] = high ? 0 : 1;
if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
printk("%s/dvb: could not access tda8290 at addr: 0x%02x\n",dev->name, addr << 1);
wprintk("could not access tda8290 at addr: 0x%02x\n",
addr << 1);
return;
}
msg.buf = GP00_LEV;
......@@ -637,7 +643,8 @@ static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable)
tda8290_msg.buf = tda8290_open;
}
if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) {
printk("saa7134/dvb: could not access tda8290 I2C gate\n");
struct saa7134_dev *dev = fe->dvb->priv;
wprintk("could not access tda8290 I2C gate\n");
return -EIO;
}
msleep(20);
......@@ -694,7 +701,7 @@ static void configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config
dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
if (dvb_attach(tda827x_attach, dev->dvb.frontend, tda_conf->tuner_address,
&dev->i2c_adap,&tda827x_cfg) == NULL) {
printk ("saa7134/dvb: no tda827x tuner found at addr: %02x\n",
wprintk("no tda827x tuner found at addr: %02x\n",
tda_conf->tuner_address);
}
}
......@@ -942,7 +949,7 @@ static int dvb_init(struct saa7134_dev *dev)
switch (dev->board) {
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
printk("%s: pinnacle 300i dvb setup\n",dev->name);
dprintk("pinnacle 300i dvb setup\n");
dev->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
&dev->i2c_adap);
if (dev->dvb.frontend) {
......@@ -951,7 +958,7 @@ static int dvb_init(struct saa7134_dev *dev)
break;
case SAA7134_BOARD_AVERMEDIA_777:
case SAA7134_BOARD_AVERMEDIA_A16AR:
printk("%s: avertv 777 dvb setup\n",dev->name);
dprintk("avertv 777 dvb setup\n");
dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
&dev->i2c_adap);
if (dev->dvb.frontend) {
......@@ -1026,11 +1033,11 @@ static int dvb_init(struct saa7134_dev *dev)
if (dev->dvb.frontend) {
if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63,
&dev->i2c_adap, 0) == NULL) {
printk("%s: Lifeview Trio, No tda826x found!\n", __FUNCTION__);
wprintk("%s: Lifeview Trio, No tda826x found!\n", __FUNCTION__);
}
if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap,
0x08, 0, 0) == NULL) {
printk("%s: Lifeview Trio, No ISL6421 found!\n", __FUNCTION__);
wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __FUNCTION__);
}
}
}
......@@ -1044,7 +1051,7 @@ static int dvb_init(struct saa7134_dev *dev)
if (dvb_attach(tda827x_attach,dev->dvb.frontend,
ads_tech_duo_config.tuner_address,
&dev->i2c_adap,&ads_duo_cfg) == NULL) {
printk ("saa7134/dvb: no tda827x tuner found at addr: %02x\n",
wprintk("no tda827x tuner found at addr: %02x\n",
ads_tech_duo_config.tuner_address);
}
}
......@@ -1077,11 +1084,11 @@ static int dvb_init(struct saa7134_dev *dev)
if (dev->dvb.frontend) {
if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60,
&dev->i2c_adap, 0) == NULL) {
printk("%s: No tda826x found!\n", __FUNCTION__);
wprintk("%s: No tda826x found!\n", __FUNCTION__);
}
if (dvb_attach(isl6421_attach, dev->dvb.frontend,
&dev->i2c_adap, 0x08, 0, 0) == NULL) {
printk("%s: No ISL6421 found!\n", __FUNCTION__);
wprintk("%s: No ISL6421 found!\n", __FUNCTION__);
}
}
break;
......@@ -1115,12 +1122,12 @@ static int dvb_init(struct saa7134_dev *dev)
configure_tda827x_fe(dev, &philips_tiger_s_config);
break;
default:
printk("%s: Huh? unknown DVB card?\n",dev->name);
wprintk("Huh? unknown DVB card?\n");
break;
}
if (NULL == dev->dvb.frontend) {
printk("%s: frontend initialization failed\n",dev->name);
printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name);
return -1;
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7