[media] stb6100: get rid of tuner_state at struct stb6100_state

The stb6100 driver has a struct tuner_state on its state
struct, that it is used only to store the bandwidth. Even so,
this struct is not really used, as every time the bandwidth
is get or set, it goes through the hardware.

So, get rid of that.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/dvb-frontends/stb6100.c

@@ -252,6 +252,7 @@ static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
 {
 	int rc;
 	u8 f;
+	u32 bw;
 	struct stb6100_state *state = fe->tuner_priv;
 
 	rc = stb6100_read_reg(state, STB6100_F);
@@ -259,9 +260,9 @@ static int stb6100_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
 		return rc;
 	f = rc & STB6100_F_F;
 
-	state->status.bandwidth = (f + 5) * 2000;	/* x2 for ZIF	*/
+	bw = (f + 5) * 2000;	/* x2 for ZIF	*/
 
-	*bandwidth = state->bandwidth = state->status.bandwidth * 1000;
+	*bandwidth = state->bandwidth = bw * 1000;
 	dprintk(verbose, FE_DEBUG, 1, "bandwidth = %u Hz", state->bandwidth);
 	return 0;
 }
@@ -495,15 +496,13 @@ static int stb6100_sleep(struct dvb_frontend *fe)
 static int stb6100_init(struct dvb_frontend *fe)
 {
 	struct stb6100_state *state = fe->tuner_priv;
-	struct tuner_state *status = &state->status;
 	int refclk = 27000000; /* Hz */
 
 	/*
 	 * iqsense = 1
 	 * tunerstep = 125000
 	 */
-	status->bandwidth	= 36000;	/* kHz	*/
-	state->bandwidth	= status->bandwidth * 1000;	/* Hz	*/
+	state->bandwidth	= 36000000;	/* Hz	*/
 	state->reference	= refclk / 1000;	/* kHz	*/
 
 	/* Set default bandwidth. Modified, PN 13-May-10	*/

drivers/media/dvb-frontends/stb6100.h

@@ -86,7 +86,6 @@ struct stb6100_state {
 	const struct stb6100_config	*config;
 	struct dvb_tuner_ops		ops;
 	struct dvb_frontend		*frontend;
-	struct tuner_state		status;
 
 	u32 frequency;
 	u32 srate;