Commit d00686df authored by Chen-Yu Tsai's avatar Chen-Yu Tsai Committed by Greg Kroah-Hartman

Bluetooth: hci_bcm: Fix empty regulator supplies for Intel Macs

commit 62611abc upstream.

The code path for Macs goes through bcm_apple_get_resources(), which
skips over the code that sets up the regulator supplies. As a result,
the call to regulator_bulk_enable() / regulator_bulk_disable() results
in a NULL pointer dereference.

This was reported on the kernel.org Bugzilla, bug 202963.

Unbreak Broadcom Bluetooth support on Intel Macs by checking if the
supplies were set up before enabling or disabling them.

The same does not need to be done for the clocks, as the common clock
framework API checks for NULL pointers.

Fixes: 75d11676 ("Bluetooth: hci_bcm: Add support for regulator supplies")
Cc: <stable@vger.kernel.org> # 5.0.x
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Tested-by: default avatarImre Kaloz <kaloz@openwrt.org>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent a324fa50
......@@ -228,9 +228,15 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
int err;
if (powered && !dev->res_enabled) {
err = regulator_bulk_enable(BCM_NUM_SUPPLIES, dev->supplies);
/* Intel Macs use bcm_apple_get_resources() and don't
* have regulator supplies configured.
*/
if (dev->supplies[0].supply) {
err = regulator_bulk_enable(BCM_NUM_SUPPLIES,
dev->supplies);
if (err)
return err;
}
/* LPO clock needs to be 32.768 kHz */
err = clk_set_rate(dev->lpo_clk, 32768);
......@@ -259,7 +265,13 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
if (!powered && dev->res_enabled) {
clk_disable_unprepare(dev->txco_clk);
clk_disable_unprepare(dev->lpo_clk);
regulator_bulk_disable(BCM_NUM_SUPPLIES, dev->supplies);
/* Intel Macs use bcm_apple_get_resources() and don't
* have regulator supplies configured.
*/
if (dev->supplies[0].supply)
regulator_bulk_disable(BCM_NUM_SUPPLIES,
dev->supplies);
}
/* wait for device to power on and come out of reset */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment