Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal

Pull thermal management updates from Eduardo Valentin:

 - rework tsens driver to add support for tsens-v2 (Amit Kucheria)

 - rework armada thermal driver to use syscon and multichannel support
   (Miquel Raynal)

 - fixes to TI SoC, IMX, Exynos, RCar, and hwmon drivers

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (34 commits)
  thermal: armada: fix copy-paste error in armada_thermal_probe()
  thermal: rcar_thermal: avoid NULL dereference in absence of IRQ resources
  thermal: samsung: Remove Exynos5440 clock handling left-overs
  thermal: tsens: Fix negative temperature reporting
  thermal: tsens: switch from of_iomap() to devm_ioremap_resource()
  thermal: tsens: Rename variable
  thermal: tsens: Add generic support for TSENS v2 IP
  thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse
  thermal: tsens: Add support to split up register address space into two
  dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP
  thermal: tsens: Get rid of unused fields in structure
  thermal_hwmon: Pass the originating device down to hwmon_device_register_with_info
  thermal_hwmon: Sanitize attribute name passed to hwmon
  dt-bindings: thermal: armada: add reference to new bindings
  dt-bindings: cp110: add the thermal node in the syscon file
  dt-bindings: cp110: update documentation since DT de-duplication
  dt-bindings: ap806: add the thermal node in the syscon file
  dt-bindings: cp110: prepare the syscon file to list other syscons nodes
  dt-bindings: ap806: prepare the syscon file to list other syscons nodes
  dt-bindings: cp110: rename cp110 syscon file
  ...

Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt

@@ -2,15 +2,18 @@ Marvell Armada AP806 System Controller
 ======================================
 
 The AP806 is one of the two core HW blocks of the Marvell Armada 7K/8K
-SoCs. It contains a system controller, which provides a number
-registers giving access to numerous features: clocks, pin-muxing and
-many other SoC configuration items. This DT binding allows to describe
-this system controller.
+SoCs. It contains system controllers, which provide several registers
+giving access to numerous features: clocks, pin-muxing and many other
+SoC configuration items. This DT binding allows to describe these
+system controllers.
 
 For the top level node:
  - compatible: must be: "syscon", "simple-mfd";
  - reg: register area of the AP806 system controller
 
+SYSTEM CONTROLLER 0
+===================
+
 Clocks:
 -------
 
@@ -98,3 +101,38 @@ ap_syscon: system-controller@6f4000 {
 		gpio-ranges = <&ap_pinctrl 0 0 19>;
 	};
 };
+
+SYSTEM CONTROLLER 1
+===================
+
+Thermal:
+--------
+
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/thermal/thermal.txt
+
+The thermal IP can probe the temperature all around the processor. It
+may feature several channels, each of them wired to one sensor.
+
+Required properties:
+- compatible: must be one of:
+  * marvell,armada-ap806-thermal
+- reg: register range associated with the thermal functions.
+
+Optional properties:
+- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
+  to this IP and represents the channel ID. There is one sensor per
+  channel. O refers to the thermal IP internal channel, while positive
+  IDs refer to each CPU.
+
+Example:
+ap_syscon1: system-controller@6f8000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x6f8000 0x1000>;
+
+	ap_thermal: thermal-sensor@80 {
+		compatible = "marvell,armada-ap806-thermal";
+		reg = <0x80 0x10>;
+		#thermal-sensor-cells = <1>;
+	};
+};

Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt → Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt

-Marvell Armada CP110 System Controller 0
-========================================
+Marvell Armada CP110 System Controller
+======================================
 
 The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K
-SoCs. It contains two sets of system control registers, System
-Controller 0 and System Controller 1. This Device Tree binding allows
-to describe the first system controller, which provides registers to
-configure various aspects of the SoC.
+SoCs. It contains system controllers, which provide several registers
+giving access to numerous features: clocks, pin-muxing and many other
+SoC configuration items. This DT binding allows to describe these
+system controllers.
 
 For the top level node:
  - compatible: must be: "syscon", "simple-mfd";
- - reg: register area of the CP110 system controller 0
+ - reg: register area of the CP110 system controller
+
+SYSTEM CONTROLLER 0
+===================
 
 Clocks:
 -------
@@ -163,26 +166,60 @@ Required properties:
 
 Example:
 
-cpm_syscon0: system-controller@440000 {
+CP110_LABEL(syscon0): system-controller@440000 {
 	compatible = "syscon", "simple-mfd";
 	reg = <0x440000 0x1000>;
 
-	cpm_clk: clock {
+	CP110_LABEL(clk): clock {
 		compatible = "marvell,cp110-clock";
 		#clock-cells = <2>;
 	};
 
-	cpm_pinctrl: pinctrl {
+	CP110_LABEL(pinctrl): pinctrl {
 		compatible = "marvell,armada-8k-cpm-pinctrl";
 	};
 
-	cpm_gpio1: gpio@100 {
+	CP110_LABEL(gpio1): gpio@100 {
 		compatible = "marvell,armada-8k-gpio";
 		offset = <0x100>;
 		ngpios = <32>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		gpio-ranges = <&cpm_pinctrl 0 0 32>;
+		gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
 	};
 
 };
+
+SYSTEM CONTROLLER 1
+===================
+
+Thermal:
+--------
+
+The thermal IP can probe the temperature all around the processor. It
+may feature several channels, each of them wired to one sensor.
+
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/thermal/thermal.txt
+
+Required properties:
+- compatible: must be one of:
+  * marvell,armada-cp110-thermal
+- reg: register range associated with the thermal functions.
+
+Optional properties:
+- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
+  to this IP and represents the channel ID. There is one sensor per
+  channel. O refers to the thermal IP internal channel.
+
+Example:
+CP110_LABEL(syscon1): system-controller@6f8000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x6f8000 0x1000>;
+
+	CP110_LABEL(thermal): thermal-sensor@70 {
+		compatible = "marvell,armada-cp110-thermal";
+		reg = <0x70 0x10>;
+		#thermal-sensor-cells = <1>;
+	};
+};

Documentation/devicetree/bindings/thermal/armada-thermal.txt

@@ -10,6 +10,11 @@ Required properties:
     * marvell,armada-ap806-thermal
     * marvell,armada-cp110-thermal
 
+Note: these bindings are deprecated for AP806/CP110 and should instead
+follow the rules described in:
+Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
+Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
+
 - reg: Device's register space.
   Two entries are expected, see the examples below. The first one points
   to the status register (4B). The second one points to the control

Documentation/devicetree/bindings/thermal/qcom-tsens.txt

 * QCOM SoC Temperature Sensor (TSENS)
 
 Required properties:
-- compatible :
- - "qcom,msm8916-tsens" : For 8916 Family of SoCs
- - "qcom,msm8974-tsens" : For 8974 Family of SoCs
- - "qcom,msm8996-tsens" : For 8996 Family of SoCs
+- compatible:
+  Must be one of the following:
+    - "qcom,msm8916-tsens" (MSM8916)
+    - "qcom,msm8974-tsens" (MSM8974)
+    - "qcom,msm8996-tsens" (MSM8996)
+    - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
+    - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
+  The generic "qcom,tsens-v2" property must be used as a fallback for any SoC
+  with version 2 of the TSENS IP. MSM8996 is the only exception because the
+  generic property did not exist when support was added.
+
+- reg: Address range of the thermal registers.
+  New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM
+  register spaces separately, with order being TM before SROT.
+  See Example 2, below.
 
-- reg: Address range of the thermal registers
 - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
 - #qcom,sensors: Number of sensors in tsens block
 - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
 nvmem cells
 
-Example:
+Example 1 (legacy support before a fallback tsens-v2 property was introduced):
 tsens: thermal-sensor@900000 {
 		compatible = "qcom,msm8916-tsens";
 		reg = <0x4a8000 0x2000>;
@@ -20,3 +30,12 @@ tsens: thermal-sensor@900000 {
 		nvmem-cell-names = "caldata", "calsel";
 		#thermal-sensor-cells = <1>;
 	};
+
+Example 2 (for any platform containing v2 of the TSENS IP):
+tsens0: thermal-sensor@c263000 {
+		compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+		reg = <0xc263000 0x1ff>, /* TM */
+			<0xc222000 0x1ff>; /* SROT */
+		#qcom,sensors = <13>;
+		#thermal-sensor-cells = <1>;
+	};

drivers/thermal/imx_thermal.c

@@ -605,7 +605,10 @@ static int imx_init_from_nvmem_cells(struct platform_device *pdev)
 	ret = nvmem_cell_read_u32(&pdev->dev, "calib", &val);
 	if (ret)
 		return ret;
-	imx_init_calib(pdev, val);
+
+	ret = imx_init_calib(pdev, val);
+	if (ret)
+		return ret;
 
 	ret = nvmem_cell_read_u32(&pdev->dev, "temp_grade", &val);
 	if (ret)

drivers/thermal/qcom/Makefile

 obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
-qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
+qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o

drivers/thermal/qcom/tsens-common.c

@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/of_address.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include "tsens.h"
@@ -103,11 +104,11 @@ int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
 {
 	struct tsens_sensor *s = &tmdev->sensor[id];
 	u32 code;
-	unsigned int sensor_addr;
+	unsigned int status_reg;
 	int last_temp = 0, ret;
 
-	sensor_addr = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET;
-	ret = regmap_read(tmdev->map, sensor_addr, &code);
+	status_reg = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET;
+	ret = regmap_read(tmdev->map, status_reg, &code);
 	if (ret)
 		return ret;
 	last_temp = code & SN_ST_TEMP_MASK;
@@ -126,16 +127,28 @@ static const struct regmap_config tsens_config = {
 int __init init_common(struct tsens_device *tmdev)
 {
 	void __iomem *base;
+	struct resource *res;
+	struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node);
 
-	base = of_iomap(tmdev->dev->of_node, 0);
-	if (!base)
+	if (!op)
 		return -EINVAL;
 
+	/* The driver only uses the TM register address space for now */
+	if (op->num_resources > 1) {
+		tmdev->tm_offset = 0;
+	} else {
+		/* old DTs where SROT and TM were in a contiguous 2K block */
+		tmdev->tm_offset = 0x1000;
+	}
+
+	res = platform_get_resource(op, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&op->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
 	tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config);
-	if (IS_ERR(tmdev->map)) {
-		iounmap(base);
+	if (IS_ERR(tmdev->map))
 		return PTR_ERR(tmdev->map);
-	}
 
 	return 0;
 }

drivers/thermal/qcom/tsens-8996.c → drivers/thermal/qcom/tsens-v2.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
+ * Copyright (c) 2018, Linaro Limited
  */
 
-#include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/bitops.h>
 #include "tsens.h"
 
-#define STATUS_OFFSET	0x10a0
+#define STATUS_OFFSET		0xa0
 #define LAST_TEMP_MASK		0xfff
 #define STATUS_VALID_BIT	BIT(21)
-#define CODE_SIGN_BIT		BIT(11)
 
-static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
+static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
 {
 	struct tsens_sensor *s = &tmdev->sensor[id];
 	u32 code;
-	unsigned int sensor_addr;
-	int last_temp = 0, last_temp2 = 0, last_temp3 = 0, ret;
+	unsigned int status_reg;
+	u32 last_temp = 0, last_temp2 = 0, last_temp3 = 0;
+	int ret;
 
-	sensor_addr = STATUS_OFFSET + s->hw_id * 4;
-	ret = regmap_read(tmdev->map, sensor_addr, &code);
+	status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * 4;
+	ret = regmap_read(tmdev->map, status_reg, &code);
 	if (ret)
 		return ret;
 	last_temp = code & LAST_TEMP_MASK;
@@ -37,7 +29,7 @@ static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
 		goto done;
 
 	/* Try a second time */
-	ret = regmap_read(tmdev->map, sensor_addr, &code);
+	ret = regmap_read(tmdev->map, status_reg, &code);
 	if (ret)
 		return ret;
 	if (code & STATUS_VALID_BIT) {
@@ -48,7 +40,7 @@ static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
 	}
 
 	/* Try a third/last time */
-	ret = regmap_read(tmdev->map, sensor_addr, &code);
+	ret = regmap_read(tmdev->map, status_reg, &code);
 	if (ret)
 		return ret;
 	if (code & STATUS_VALID_BIT) {
@@ -63,22 +55,23 @@ static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
 	else if (last_temp2 == last_temp3)
 		last_temp = last_temp3;
 done:
-	/* Code sign bit is the sign extension for a negative value */
-	if (last_temp & CODE_SIGN_BIT)
-		last_temp |= ~CODE_SIGN_BIT;
-
-	/* Temperatures are in deciCelicius */
-	*temp = last_temp * 100;
+	/* Convert temperature from deciCelsius to milliCelsius */
+	*temp = sign_extend32(last_temp, fls(LAST_TEMP_MASK) - 1) * 100;
 
 	return 0;
 }
 
-static const struct tsens_ops ops_8996 = {
+static const struct tsens_ops ops_generic_v2 = {
 	.init		= init_common,
-	.get_temp	= get_temp_8996,
+	.get_temp	= get_temp_tsens_v2,
+};
+
+const struct tsens_data data_tsens_v2 = {
+	.ops            = &ops_generic_v2,
 };
 
+/* Kept around for backward compatibility with old msm8996.dtsi */
 const struct tsens_data data_8996 = {
 	.num_sensors	= 13,
-	.ops		= &ops_8996,
+	.ops		= &ops_generic_v2,
 };

drivers/thermal/qcom/tsens.c

@@ -72,6 +72,9 @@ static const struct of_device_id tsens_table[] = {
 	}, {
 		.compatible = "qcom,msm8996-tsens",
 		.data = &data_8996,
+	}, {
+		.compatible = "qcom,tsens-v2",
+		.data = &data_tsens_v2,
 	},
 	{}
 };

drivers/thermal/qcom/tsens.h

@@ -77,9 +77,8 @@ struct tsens_device {
 	struct device			*dev;
 	u32				num_sensors;
 	struct regmap			*map;
-	struct regmap_field		*status_field;
+	u32				tm_offset;
 	struct tsens_context		ctx;
-	bool				trdy;
 	const struct tsens_ops		*ops;
 	struct tsens_sensor		sensor[0];
 };
@@ -89,6 +88,9 @@ void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
 int init_common(struct tsens_device *);
 int get_temp_common(struct tsens_device *, int, int *);
 
-extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
+/* TSENS v1 targets */
+extern const struct tsens_data data_8916, data_8974, data_8960;
+/* TSENS v2 targets */
+extern const struct tsens_data data_8996, data_tsens_v2;
 
 #endif /* __QCOM_TSENS_H__ */

drivers/thermal/rcar_thermal.c

@@ -598,7 +598,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 			enr_bits |= 3 << (i * 8);
 	}
 
-	if (enr_bits)
+	if (common->base && enr_bits)
 		rcar_thermal_common_write(common, ENR, enr_bits);
 
 	dev_info(dev, "%d sensor probed\n", i);

drivers/thermal/samsung/exynos_tmu.c

@@ -789,11 +789,6 @@ static void exynos_tmu_work(struct work_struct *work)
 	struct exynos_tmu_data *data = container_of(work,
 			struct exynos_tmu_data, irq_work);
 
-	if (!IS_ERR(data->clk_sec))
-		clk_enable(data->clk_sec);
-	if (!IS_ERR(data->clk_sec))
-		clk_disable(data->clk_sec);
-
 	thermal_zone_device_update(data->tzd, THERMAL_EVENT_UNSPECIFIED);
 
 	mutex_lock(&data->lock);

drivers/thermal/thermal_hwmon.c

@@ -142,7 +142,8 @@ int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 
 	INIT_LIST_HEAD(&hwmon->tz_list);
 	strlcpy(hwmon->type, tz->type, THERMAL_NAME_LENGTH);
-	hwmon->device = hwmon_device_register_with_info(NULL, hwmon->type,
+	strreplace(hwmon->type, '-', '_');
+	hwmon->device = hwmon_device_register_with_info(&tz->device, hwmon->type,
 							hwmon, NULL, NULL);
 	if (IS_ERR(hwmon->device)) {
 		result = PTR_ERR(hwmon->device);

drivers/thermal/ti-soc-thermal/dra752-bandgap.h

@@ -54,56 +54,36 @@
 #define DRA752_STD_FUSE_OPP_BGAP_CORE_OFFSET		0x8
 #define DRA752_TEMP_SENSOR_CORE_OFFSET			0x154
 #define DRA752_BANDGAP_THRESHOLD_CORE_OFFSET		0x1ac
-#define DRA752_BANDGAP_CUMUL_DTEMP_CORE_OFFSET		0x1c4
-#define DRA752_DTEMP_CORE_0_OFFSET			0x208
 #define DRA752_DTEMP_CORE_1_OFFSET			0x20c
 #define DRA752_DTEMP_CORE_2_OFFSET			0x210
-#define DRA752_DTEMP_CORE_3_OFFSET			0x214
-#define DRA752_DTEMP_CORE_4_OFFSET			0x218
 
 /* DRA752.iva register offsets */
 #define DRA752_STD_FUSE_OPP_BGAP_IVA_OFFSET		0x388
 #define DRA752_TEMP_SENSOR_IVA_OFFSET			0x398
 #define DRA752_BANDGAP_THRESHOLD_IVA_OFFSET		0x3a4
-#define DRA752_BANDGAP_CUMUL_DTEMP_IVA_OFFSET		0x3b4
-#define DRA752_DTEMP_IVA_0_OFFSET			0x3d0
 #define DRA752_DTEMP_IVA_1_OFFSET			0x3d4
 #define DRA752_DTEMP_IVA_2_OFFSET			0x3d8
-#define DRA752_DTEMP_IVA_3_OFFSET			0x3dc
-#define DRA752_DTEMP_IVA_4_OFFSET			0x3e0
 
 /* DRA752.mpu register offsets */
 #define DRA752_STD_FUSE_OPP_BGAP_MPU_OFFSET		0x4
 #define DRA752_TEMP_SENSOR_MPU_OFFSET			0x14c
 #define DRA752_BANDGAP_THRESHOLD_MPU_OFFSET		0x1a4
-#define DRA752_BANDGAP_CUMUL_DTEMP_MPU_OFFSET		0x1bc
-#define DRA752_DTEMP_MPU_0_OFFSET			0x1e0
 #define DRA752_DTEMP_MPU_1_OFFSET			0x1e4
 #define DRA752_DTEMP_MPU_2_OFFSET			0x1e8
-#define DRA752_DTEMP_MPU_3_OFFSET			0x1ec
-#define DRA752_DTEMP_MPU_4_OFFSET			0x1f0
 
 /* DRA752.dspeve register offsets */
 #define DRA752_STD_FUSE_OPP_BGAP_DSPEVE_OFFSET			0x384
 #define DRA752_TEMP_SENSOR_DSPEVE_OFFSET			0x394
 #define DRA752_BANDGAP_THRESHOLD_DSPEVE_OFFSET			0x3a0
-#define DRA752_BANDGAP_CUMUL_DTEMP_DSPEVE_OFFSET		0x3b0
-#define DRA752_DTEMP_DSPEVE_0_OFFSET				0x3bc
 #define DRA752_DTEMP_DSPEVE_1_OFFSET				0x3c0
 #define DRA752_DTEMP_DSPEVE_2_OFFSET				0x3c4
-#define DRA752_DTEMP_DSPEVE_3_OFFSET				0x3c8
-#define DRA752_DTEMP_DSPEVE_4_OFFSET				0x3cc
 
 /* DRA752.gpu register offsets */
 #define DRA752_STD_FUSE_OPP_BGAP_GPU_OFFSET		0x0
 #define DRA752_TEMP_SENSOR_GPU_OFFSET			0x150
 #define DRA752_BANDGAP_THRESHOLD_GPU_OFFSET		0x1a8
-#define DRA752_BANDGAP_CUMUL_DTEMP_GPU_OFFSET		0x1c0
-#define DRA752_DTEMP_GPU_0_OFFSET			0x1f4
 #define DRA752_DTEMP_GPU_1_OFFSET			0x1f8
 #define DRA752_DTEMP_GPU_2_OFFSET			0x1fc
-#define DRA752_DTEMP_GPU_3_OFFSET			0x200
-#define DRA752_DTEMP_GPU_4_OFFSET			0x204
 
 /**
  * Register bitfields for DRA752
@@ -114,7 +94,6 @@
  */
 
 /* DRA752.BANDGAP_STATUS_1 */
-#define DRA752_BANDGAP_STATUS_1_ALERT_MASK		BIT(31)
 #define DRA752_BANDGAP_STATUS_1_HOT_CORE_MASK		BIT(5)
 #define DRA752_BANDGAP_STATUS_1_COLD_CORE_MASK		BIT(4)
 #define DRA752_BANDGAP_STATUS_1_HOT_GPU_MASK		BIT(3)
@@ -125,10 +104,6 @@
 /* DRA752.BANDGAP_CTRL_2 */
 #define DRA752_BANDGAP_CTRL_2_FREEZE_IVA_MASK			BIT(22)
 #define DRA752_BANDGAP_CTRL_2_FREEZE_DSPEVE_MASK		BIT(21)
-#define DRA752_BANDGAP_CTRL_2_CLEAR_IVA_MASK			BIT(19)
-#define DRA752_BANDGAP_CTRL_2_CLEAR_DSPEVE_MASK			BIT(18)
-#define DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_IVA_MASK		BIT(16)
-#define DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_DSPEVE_MASK		BIT(15)
 #define DRA752_BANDGAP_CTRL_2_MASK_HOT_IVA_MASK			BIT(3)
 #define DRA752_BANDGAP_CTRL_2_MASK_COLD_IVA_MASK		BIT(2)
 #define DRA752_BANDGAP_CTRL_2_MASK_HOT_DSPEVE_MASK		BIT(1)
@@ -141,17 +116,10 @@
 #define DRA752_BANDGAP_STATUS_2_COLD_DSPEVE_MASK		BIT(0)
 
 /* DRA752.BANDGAP_CTRL_1 */
-#define DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK			(0x3 << 30)
 #define DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK		(0x7 << 27)
 #define DRA752_BANDGAP_CTRL_1_FREEZE_CORE_MASK			BIT(23)
 #define DRA752_BANDGAP_CTRL_1_FREEZE_GPU_MASK			BIT(22)
 #define DRA752_BANDGAP_CTRL_1_FREEZE_MPU_MASK			BIT(21)
-#define DRA752_BANDGAP_CTRL_1_CLEAR_CORE_MASK			BIT(20)
-#define DRA752_BANDGAP_CTRL_1_CLEAR_GPU_MASK			BIT(19)
-#define DRA752_BANDGAP_CTRL_1_CLEAR_MPU_MASK			BIT(18)
-#define DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_CORE_MASK		BIT(17)
-#define DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_GPU_MASK		BIT(16)
-#define DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_MPU_MASK		BIT(15)
 #define DRA752_BANDGAP_CTRL_1_MASK_HOT_CORE_MASK		BIT(5)
 #define DRA752_BANDGAP_CTRL_1_MASK_COLD_CORE_MASK		BIT(4)
 #define DRA752_BANDGAP_CTRL_1_MASK_HOT_GPU_MASK			BIT(3)
@@ -168,22 +136,6 @@
 #define DRA752_BANDGAP_THRESHOLD_HOT_MASK		(0x3ff << 16)
 #define DRA752_BANDGAP_THRESHOLD_COLD_MASK		(0x3ff << 0)
 
-
-/* DRA752.BANDGAP_CUMUL_DTEMP_CORE */
-#define DRA752_BANDGAP_CUMUL_DTEMP_CORE_MASK		(0xffffffff << 0)
-
-/* DRA752.BANDGAP_CUMUL_DTEMP_IVA */
-#define DRA752_BANDGAP_CUMUL_DTEMP_IVA_MASK		(0xffffffff << 0)
-
-/* DRA752.BANDGAP_CUMUL_DTEMP_MPU */
-#define DRA752_BANDGAP_CUMUL_DTEMP_MPU_MASK		(0xffffffff << 0)
-
-/* DRA752.BANDGAP_CUMUL_DTEMP_DSPEVE */
-#define DRA752_BANDGAP_CUMUL_DTEMP_DSPEVE_MASK		(0xffffffff << 0)
-
-/* DRA752.BANDGAP_CUMUL_DTEMP_GPU */
-#define DRA752_BANDGAP_CUMUL_DTEMP_GPU_MASK		(0xffffffff << 0)
-
 /**
  * Temperature limits and thresholds for DRA752
  *
@@ -202,10 +154,6 @@
 /* bandgap clock limits */
 #define DRA752_GPU_MAX_FREQ				1500000
 #define DRA752_GPU_MIN_FREQ				1000000
-/* sensor limits */
-#define DRA752_GPU_MIN_TEMP				-40000
-#define DRA752_GPU_MAX_TEMP				125000
-#define DRA752_GPU_HYST_VAL				5000
 /* interrupts thresholds */
 #define DRA752_GPU_T_HOT				800
 #define DRA752_GPU_T_COLD				795
@@ -214,10 +162,6 @@
 /* bandgap clock limits */
 #define DRA752_MPU_MAX_FREQ				1500000
 #define DRA752_MPU_MIN_FREQ				1000000
-/* sensor limits */
-#define DRA752_MPU_MIN_TEMP				-40000
-#define DRA752_MPU_MAX_TEMP				125000
-#define DRA752_MPU_HYST_VAL				5000
 /* interrupts thresholds */
 #define DRA752_MPU_T_HOT				800
 #define DRA752_MPU_T_COLD				795
@@ -226,10 +170,6 @@
 /* bandgap clock limits */
 #define DRA752_CORE_MAX_FREQ				1500000
 #define DRA752_CORE_MIN_FREQ				1000000
-/* sensor limits */
-#define DRA752_CORE_MIN_TEMP				-40000
-#define DRA752_CORE_MAX_TEMP				125000
-#define DRA752_CORE_HYST_VAL				5000
 /* interrupts thresholds */
 #define DRA752_CORE_T_HOT				800
 #define DRA752_CORE_T_COLD				795
@@ -238,10 +178,6 @@
 /* bandgap clock limits */
 #define DRA752_DSPEVE_MAX_FREQ				1500000
 #define DRA752_DSPEVE_MIN_FREQ				1000000
-/* sensor limits */
-#define DRA752_DSPEVE_MIN_TEMP				-40000
-#define DRA752_DSPEVE_MAX_TEMP				125000
-#define DRA752_DSPEVE_HYST_VAL				5000
 /* interrupts thresholds */
 #define DRA752_DSPEVE_T_HOT				800
 #define DRA752_DSPEVE_T_COLD				795
@@ -250,10 +186,6 @@
 /* bandgap clock limits */
 #define DRA752_IVA_MAX_FREQ				1500000
 #define DRA752_IVA_MIN_FREQ				1000000
-/* sensor limits */
-#define DRA752_IVA_MIN_TEMP				-40000
-#define DRA752_IVA_MAX_TEMP				125000
-#define DRA752_IVA_HYST_VAL				5000
 /* interrupts thresholds */
 #define DRA752_IVA_T_HOT				800
 #define DRA752_IVA_T_COLD				795

drivers/thermal/ti-soc-thermal/dra752-thermal-data.c

@@ -41,24 +41,16 @@ dra752_core_temp_sensor_registers = {
 	.bgap_mask_ctrl = DRA752_BANDGAP_CTRL_1_OFFSET,
 	.mask_hot_mask = DRA752_BANDGAP_CTRL_1_MASK_HOT_CORE_MASK,
 	.mask_cold_mask = DRA752_BANDGAP_CTRL_1_MASK_COLD_CORE_MASK,
-	.mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = DRA752_BANDGAP_CTRL_1_FREEZE_CORE_MASK,
-	.mask_clear_mask = DRA752_BANDGAP_CTRL_1_CLEAR_CORE_MASK,
-	.mask_clear_accum_mask = DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_CORE_MASK,
 	.bgap_threshold = DRA752_BANDGAP_THRESHOLD_CORE_OFFSET,
 	.threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK,
 	.threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK,
 	.bgap_status = DRA752_BANDGAP_STATUS_1_OFFSET,
-	.status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK,
 	.status_hot_mask = DRA752_BANDGAP_STATUS_1_HOT_CORE_MASK,
 	.status_cold_mask = DRA752_BANDGAP_STATUS_1_COLD_CORE_MASK,
-	.bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_CORE_OFFSET,
-	.ctrl_dtemp_0 = DRA752_DTEMP_CORE_0_OFFSET,
 	.ctrl_dtemp_1 = DRA752_DTEMP_CORE_1_OFFSET,
 	.ctrl_dtemp_2 = DRA752_DTEMP_CORE_2_OFFSET,
-	.ctrl_dtemp_3 = DRA752_DTEMP_CORE_3_OFFSET,
-	.ctrl_dtemp_4 = DRA752_DTEMP_CORE_4_OFFSET,
 	.bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_CORE_OFFSET,
 };
 
@@ -74,24 +66,16 @@ dra752_iva_temp_sensor_registers = {
 	.bgap_mask_ctrl = DRA752_BANDGAP_CTRL_2_OFFSET,
 	.mask_hot_mask = DRA752_BANDGAP_CTRL_2_MASK_HOT_IVA_MASK,
 	.mask_cold_mask = DRA752_BANDGAP_CTRL_2_MASK_COLD_IVA_MASK,
-	.mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = DRA752_BANDGAP_CTRL_2_FREEZE_IVA_MASK,
-	.mask_clear_mask = DRA752_BANDGAP_CTRL_2_CLEAR_IVA_MASK,
-	.mask_clear_accum_mask = DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_IVA_MASK,
 	.bgap_threshold = DRA752_BANDGAP_THRESHOLD_IVA_OFFSET,
 	.threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK,
 	.threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK,
 	.bgap_status = DRA752_BANDGAP_STATUS_2_OFFSET,
-	.status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK,
 	.status_hot_mask = DRA752_BANDGAP_STATUS_2_HOT_IVA_MASK,
 	.status_cold_mask = DRA752_BANDGAP_STATUS_2_COLD_IVA_MASK,
-	.bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_IVA_OFFSET,
-	.ctrl_dtemp_0 = DRA752_DTEMP_IVA_0_OFFSET,
 	.ctrl_dtemp_1 = DRA752_DTEMP_IVA_1_OFFSET,
 	.ctrl_dtemp_2 = DRA752_DTEMP_IVA_2_OFFSET,
-	.ctrl_dtemp_3 = DRA752_DTEMP_IVA_3_OFFSET,
-	.ctrl_dtemp_4 = DRA752_DTEMP_IVA_4_OFFSET,
 	.bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_IVA_OFFSET,
 };
 
@@ -107,24 +91,16 @@ dra752_mpu_temp_sensor_registers = {
 	.bgap_mask_ctrl = DRA752_BANDGAP_CTRL_1_OFFSET,
 	.mask_hot_mask = DRA752_BANDGAP_CTRL_1_MASK_HOT_MPU_MASK,
 	.mask_cold_mask = DRA752_BANDGAP_CTRL_1_MASK_COLD_MPU_MASK,
-	.mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = DRA752_BANDGAP_CTRL_1_FREEZE_MPU_MASK,
-	.mask_clear_mask = DRA752_BANDGAP_CTRL_1_CLEAR_MPU_MASK,
-	.mask_clear_accum_mask = DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_MPU_MASK,
 	.bgap_threshold = DRA752_BANDGAP_THRESHOLD_MPU_OFFSET,
 	.threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK,
 	.threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK,
 	.bgap_status = DRA752_BANDGAP_STATUS_1_OFFSET,
-	.status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK,
 	.status_hot_mask = DRA752_BANDGAP_STATUS_1_HOT_MPU_MASK,
 	.status_cold_mask = DRA752_BANDGAP_STATUS_1_COLD_MPU_MASK,
-	.bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_MPU_OFFSET,
-	.ctrl_dtemp_0 = DRA752_DTEMP_MPU_0_OFFSET,
 	.ctrl_dtemp_1 = DRA752_DTEMP_MPU_1_OFFSET,
 	.ctrl_dtemp_2 = DRA752_DTEMP_MPU_2_OFFSET,
-	.ctrl_dtemp_3 = DRA752_DTEMP_MPU_3_OFFSET,
-	.ctrl_dtemp_4 = DRA752_DTEMP_MPU_4_OFFSET,
 	.bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_MPU_OFFSET,
 };
 
@@ -140,24 +116,16 @@ dra752_dspeve_temp_sensor_registers = {
 	.bgap_mask_ctrl = DRA752_BANDGAP_CTRL_2_OFFSET,
 	.mask_hot_mask = DRA752_BANDGAP_CTRL_2_MASK_HOT_DSPEVE_MASK,
 	.mask_cold_mask = DRA752_BANDGAP_CTRL_2_MASK_COLD_DSPEVE_MASK,
-	.mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = DRA752_BANDGAP_CTRL_2_FREEZE_DSPEVE_MASK,
-	.mask_clear_mask = DRA752_BANDGAP_CTRL_2_CLEAR_DSPEVE_MASK,
-	.mask_clear_accum_mask = DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_DSPEVE_MASK,
 	.bgap_threshold = DRA752_BANDGAP_THRESHOLD_DSPEVE_OFFSET,
 	.threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK,
 	.threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK,
 	.bgap_status = DRA752_BANDGAP_STATUS_2_OFFSET,
-	.status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK,
 	.status_hot_mask = DRA752_BANDGAP_STATUS_2_HOT_DSPEVE_MASK,
 	.status_cold_mask = DRA752_BANDGAP_STATUS_2_COLD_DSPEVE_MASK,
-	.bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_DSPEVE_OFFSET,
-	.ctrl_dtemp_0 = DRA752_DTEMP_DSPEVE_0_OFFSET,
 	.ctrl_dtemp_1 = DRA752_DTEMP_DSPEVE_1_OFFSET,
 	.ctrl_dtemp_2 = DRA752_DTEMP_DSPEVE_2_OFFSET,
-	.ctrl_dtemp_3 = DRA752_DTEMP_DSPEVE_3_OFFSET,
-	.ctrl_dtemp_4 = DRA752_DTEMP_DSPEVE_4_OFFSET,
 	.bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_DSPEVE_OFFSET,
 };
 
@@ -173,24 +141,16 @@ dra752_gpu_temp_sensor_registers = {
 	.bgap_mask_ctrl = DRA752_BANDGAP_CTRL_1_OFFSET,
 	.mask_hot_mask = DRA752_BANDGAP_CTRL_1_MASK_HOT_GPU_MASK,
 	.mask_cold_mask = DRA752_BANDGAP_CTRL_1_MASK_COLD_GPU_MASK,
-	.mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = DRA752_BANDGAP_CTRL_1_FREEZE_GPU_MASK,
-	.mask_clear_mask = DRA752_BANDGAP_CTRL_1_CLEAR_GPU_MASK,
-	.mask_clear_accum_mask = DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_GPU_MASK,
 	.bgap_threshold = DRA752_BANDGAP_THRESHOLD_GPU_OFFSET,
 	.threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK,
 	.threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK,
 	.bgap_status = DRA752_BANDGAP_STATUS_1_OFFSET,
-	.status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK,
 	.status_hot_mask = DRA752_BANDGAP_STATUS_1_HOT_GPU_MASK,
 	.status_cold_mask = DRA752_BANDGAP_STATUS_1_COLD_GPU_MASK,
-	.bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_GPU_OFFSET,
-	.ctrl_dtemp_0 = DRA752_DTEMP_GPU_0_OFFSET,
 	.ctrl_dtemp_1 = DRA752_DTEMP_GPU_1_OFFSET,
 	.ctrl_dtemp_2 = DRA752_DTEMP_GPU_2_OFFSET,
-	.ctrl_dtemp_3 = DRA752_DTEMP_GPU_3_OFFSET,
-	.ctrl_dtemp_4 = DRA752_DTEMP_GPU_4_OFFSET,
 	.bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_GPU_OFFSET,
 };
 
@@ -200,11 +160,6 @@ static struct temp_sensor_data dra752_mpu_temp_sensor_data = {
 	.t_cold = DRA752_MPU_T_COLD,
 	.min_freq = DRA752_MPU_MIN_FREQ,
 	.max_freq = DRA752_MPU_MAX_FREQ,
-	.max_temp = DRA752_MPU_MAX_TEMP,
-	.min_temp = DRA752_MPU_MIN_TEMP,
-	.hyst_val = DRA752_MPU_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /* Thresholds and limits for DRA752 GPU temperature sensor */
@@ -213,11 +168,6 @@ static struct temp_sensor_data dra752_gpu_temp_sensor_data = {
 	.t_cold = DRA752_GPU_T_COLD,
 	.min_freq = DRA752_GPU_MIN_FREQ,
 	.max_freq = DRA752_GPU_MAX_FREQ,
-	.max_temp = DRA752_GPU_MAX_TEMP,
-	.min_temp = DRA752_GPU_MIN_TEMP,
-	.hyst_val = DRA752_GPU_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /* Thresholds and limits for DRA752 CORE temperature sensor */
@@ -226,11 +176,6 @@ static struct temp_sensor_data dra752_core_temp_sensor_data = {
 	.t_cold = DRA752_CORE_T_COLD,
 	.min_freq = DRA752_CORE_MIN_FREQ,
 	.max_freq = DRA752_CORE_MAX_FREQ,
-	.max_temp = DRA752_CORE_MAX_TEMP,
-	.min_temp = DRA752_CORE_MIN_TEMP,
-	.hyst_val = DRA752_CORE_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /* Thresholds and limits for DRA752 DSPEVE temperature sensor */
@@ -239,11 +184,6 @@ static struct temp_sensor_data dra752_dspeve_temp_sensor_data = {
 	.t_cold = DRA752_DSPEVE_T_COLD,
 	.min_freq = DRA752_DSPEVE_MIN_FREQ,
 	.max_freq = DRA752_DSPEVE_MAX_FREQ,
-	.max_temp = DRA752_DSPEVE_MAX_TEMP,
-	.min_temp = DRA752_DSPEVE_MIN_TEMP,
-	.hyst_val = DRA752_DSPEVE_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /* Thresholds and limits for DRA752 IVA temperature sensor */
@@ -252,11 +192,6 @@ static struct temp_sensor_data dra752_iva_temp_sensor_data = {
 	.t_cold = DRA752_IVA_T_COLD,
 	.min_freq = DRA752_IVA_MIN_FREQ,
 	.max_freq = DRA752_IVA_MAX_FREQ,
-	.max_temp = DRA752_IVA_MAX_TEMP,
-	.min_temp = DRA752_IVA_MIN_TEMP,
-	.hyst_val = DRA752_IVA_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /*

drivers/thermal/ti-soc-thermal/omap3-thermal-data.c

@@ -48,9 +48,6 @@ omap34xx_mpu_temp_sensor_registers = {
 static struct temp_sensor_data omap34xx_mpu_temp_sensor_data = {
 	.min_freq = 32768,
 	.max_freq = 32768,
-	.max_temp = 125000,
-	.min_temp = -40000,
-	.hyst_val = 5000,
 };
 
 /*
@@ -119,9 +116,6 @@ omap36xx_mpu_temp_sensor_registers = {
 static struct temp_sensor_data omap36xx_mpu_temp_sensor_data = {
 	.min_freq = 32768,
 	.max_freq = 32768,
-	.max_temp = 125000,
-	.min_temp = -40000,
-	.hyst_val = 5000,
 };
 
 /*

drivers/thermal/ti-soc-thermal/omap4-thermal-data.c

@@ -42,9 +42,6 @@ omap4430_mpu_temp_sensor_registers = {
 static struct temp_sensor_data omap4430_mpu_temp_sensor_data = {
 	.min_freq = OMAP4430_MIN_FREQ,
 	.max_freq = OMAP4430_MAX_FREQ,
-	.max_temp = OMAP4430_MAX_TEMP,
-	.min_temp = OMAP4430_MIN_TEMP,
-	.hyst_val = OMAP4430_HYST_VAL,
 };
 
 /*
@@ -121,8 +118,6 @@ omap4460_mpu_temp_sensor_registers = {
 	.tshut_cold_mask = OMAP4460_TSHUT_COLD_MASK,
 
 	.bgap_status = OMAP4460_BGAP_STATUS_OFFSET,
-	.status_clean_stop_mask = OMAP4460_CLEAN_STOP_MASK,
-	.status_bgap_alert_mask = OMAP4460_BGAP_ALERT_MASK,
 	.status_hot_mask = OMAP4460_HOT_FLAG_MASK,
 	.status_cold_mask = OMAP4460_COLD_FLAG_MASK,
 
@@ -137,11 +132,6 @@ static struct temp_sensor_data omap4460_mpu_temp_sensor_data = {
 	.t_cold = OMAP4460_T_COLD,
 	.min_freq = OMAP4460_MIN_FREQ,
 	.max_freq = OMAP4460_MAX_FREQ,
-	.max_temp = OMAP4460_MAX_TEMP,
-	.min_temp = OMAP4460_MIN_TEMP,
-	.hyst_val = OMAP4460_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /*

drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h

@@ -73,10 +73,6 @@
 /* bandgap clock limits (no control on 4430) */
 #define OMAP4430_MAX_FREQ				32768
 #define OMAP4430_MIN_FREQ				32768
-/* sensor limits */
-#define OMAP4430_MIN_TEMP				-40000
-#define OMAP4430_MAX_TEMP				125000
-#define OMAP4430_HYST_VAL				5000
 
 /**
  * *** OMAP4460 *** Applicable for OMAP4470
@@ -143,8 +139,6 @@
 #define OMAP4460_TSHUT_COLD_MASK			(0x3ff << 0)
 
 /* OMAP4460.BANDGAP_STATUS bits */
-#define OMAP4460_CLEAN_STOP_MASK			BIT(3)
-#define OMAP4460_BGAP_ALERT_MASK			BIT(2)
 #define OMAP4460_HOT_FLAG_MASK				BIT(1)
 #define OMAP4460_COLD_FLAG_MASK				BIT(0)
 
@@ -162,10 +156,6 @@
 /* bandgap clock limits */
 #define OMAP4460_MAX_FREQ				1500000
 #define OMAP4460_MIN_FREQ				1000000
-/* sensor limits */
-#define OMAP4460_MIN_TEMP				-40000
-#define OMAP4460_MAX_TEMP				123000
-#define OMAP4460_HYST_VAL				5000
 /* interrupts thresholds */
 #define OMAP4460_TSHUT_HOT				900	/* 122 deg C */
 #define OMAP4460_TSHUT_COLD				895	/* 100 deg C */

drivers/thermal/ti-soc-thermal/omap5-thermal-data.c

@@ -38,12 +38,8 @@ omap5430_mpu_temp_sensor_registers = {
 	.bgap_mask_ctrl = OMAP5430_BGAP_CTRL_OFFSET,
 	.mask_hot_mask = OMAP5430_MASK_HOT_MPU_MASK,
 	.mask_cold_mask = OMAP5430_MASK_COLD_MPU_MASK,
-	.mask_sidlemode_mask = OMAP5430_MASK_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = OMAP5430_MASK_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = OMAP5430_MASK_FREEZE_MPU_MASK,
-	.mask_clear_mask = OMAP5430_MASK_CLEAR_MPU_MASK,
-	.mask_clear_accum_mask = OMAP5430_MASK_CLEAR_ACCUM_MPU_MASK,
-
 
 	.bgap_counter = OMAP5430_BGAP_CTRL_OFFSET,
 	.counter_mask = OMAP5430_COUNTER_MASK,
@@ -57,17 +53,11 @@ omap5430_mpu_temp_sensor_registers = {
 	.tshut_cold_mask = OMAP5430_TSHUT_COLD_MASK,
 
 	.bgap_status = OMAP5430_BGAP_STATUS_OFFSET,
-	.status_clean_stop_mask = 0x0,
-	.status_bgap_alert_mask = OMAP5430_BGAP_ALERT_MASK,
 	.status_hot_mask = OMAP5430_HOT_MPU_FLAG_MASK,
 	.status_cold_mask = OMAP5430_COLD_MPU_FLAG_MASK,
 
-	.bgap_cumul_dtemp = OMAP5430_BGAP_CUMUL_DTEMP_MPU_OFFSET,
-	.ctrl_dtemp_0 = OMAP5430_BGAP_DTEMP_MPU_0_OFFSET,
 	.ctrl_dtemp_1 = OMAP5430_BGAP_DTEMP_MPU_1_OFFSET,
 	.ctrl_dtemp_2 = OMAP5430_BGAP_DTEMP_MPU_2_OFFSET,
-	.ctrl_dtemp_3 = OMAP5430_BGAP_DTEMP_MPU_3_OFFSET,
-	.ctrl_dtemp_4 = OMAP5430_BGAP_DTEMP_MPU_4_OFFSET,
 	.bgap_efuse = OMAP5430_FUSE_OPP_BGAP_MPU,
 };
 
@@ -84,11 +74,8 @@ omap5430_gpu_temp_sensor_registers = {
 	.bgap_mask_ctrl = OMAP5430_BGAP_CTRL_OFFSET,
 	.mask_hot_mask = OMAP5430_MASK_HOT_GPU_MASK,
 	.mask_cold_mask = OMAP5430_MASK_COLD_GPU_MASK,
-	.mask_sidlemode_mask = OMAP5430_MASK_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = OMAP5430_MASK_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = OMAP5430_MASK_FREEZE_GPU_MASK,
-	.mask_clear_mask = OMAP5430_MASK_CLEAR_GPU_MASK,
-	.mask_clear_accum_mask = OMAP5430_MASK_CLEAR_ACCUM_GPU_MASK,
 
 	.bgap_counter = OMAP5430_BGAP_CTRL_OFFSET,
 	.counter_mask = OMAP5430_COUNTER_MASK,
@@ -102,17 +89,11 @@ omap5430_gpu_temp_sensor_registers = {
 	.tshut_cold_mask = OMAP5430_TSHUT_COLD_MASK,
 
 	.bgap_status = OMAP5430_BGAP_STATUS_OFFSET,
-	.status_clean_stop_mask = 0x0,
-	.status_bgap_alert_mask = OMAP5430_BGAP_ALERT_MASK,
 	.status_hot_mask = OMAP5430_HOT_GPU_FLAG_MASK,
 	.status_cold_mask = OMAP5430_COLD_GPU_FLAG_MASK,
 
-	.bgap_cumul_dtemp = OMAP5430_BGAP_CUMUL_DTEMP_GPU_OFFSET,
-	.ctrl_dtemp_0 = OMAP5430_BGAP_DTEMP_GPU_0_OFFSET,
 	.ctrl_dtemp_1 = OMAP5430_BGAP_DTEMP_GPU_1_OFFSET,
 	.ctrl_dtemp_2 = OMAP5430_BGAP_DTEMP_GPU_2_OFFSET,
-	.ctrl_dtemp_3 = OMAP5430_BGAP_DTEMP_GPU_3_OFFSET,
-	.ctrl_dtemp_4 = OMAP5430_BGAP_DTEMP_GPU_4_OFFSET,
 
 	.bgap_efuse = OMAP5430_FUSE_OPP_BGAP_GPU,
 };
@@ -130,11 +111,8 @@ omap5430_core_temp_sensor_registers = {
 	.bgap_mask_ctrl = OMAP5430_BGAP_CTRL_OFFSET,
 	.mask_hot_mask = OMAP5430_MASK_HOT_CORE_MASK,
 	.mask_cold_mask = OMAP5430_MASK_COLD_CORE_MASK,
-	.mask_sidlemode_mask = OMAP5430_MASK_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = OMAP5430_MASK_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = OMAP5430_MASK_FREEZE_CORE_MASK,
-	.mask_clear_mask = OMAP5430_MASK_CLEAR_CORE_MASK,
-	.mask_clear_accum_mask = OMAP5430_MASK_CLEAR_ACCUM_CORE_MASK,
 
 	.bgap_counter = OMAP5430_BGAP_CTRL_OFFSET,
 	.counter_mask = OMAP5430_COUNTER_MASK,
@@ -148,17 +126,11 @@ omap5430_core_temp_sensor_registers = {
 	.tshut_cold_mask = OMAP5430_TSHUT_COLD_MASK,
 
 	.bgap_status = OMAP5430_BGAP_STATUS_OFFSET,
-	.status_clean_stop_mask = 0x0,
-	.status_bgap_alert_mask = OMAP5430_BGAP_ALERT_MASK,
 	.status_hot_mask = OMAP5430_HOT_CORE_FLAG_MASK,
 	.status_cold_mask = OMAP5430_COLD_CORE_FLAG_MASK,
 
-	.bgap_cumul_dtemp = OMAP5430_BGAP_CUMUL_DTEMP_CORE_OFFSET,
-	.ctrl_dtemp_0 = OMAP5430_BGAP_DTEMP_CORE_0_OFFSET,
 	.ctrl_dtemp_1 = OMAP5430_BGAP_DTEMP_CORE_1_OFFSET,
 	.ctrl_dtemp_2 = OMAP5430_BGAP_DTEMP_CORE_2_OFFSET,
-	.ctrl_dtemp_3 = OMAP5430_BGAP_DTEMP_CORE_3_OFFSET,
-	.ctrl_dtemp_4 = OMAP5430_BGAP_DTEMP_CORE_4_OFFSET,
 
 	.bgap_efuse = OMAP5430_FUSE_OPP_BGAP_CORE,
 };
@@ -171,11 +143,6 @@ static struct temp_sensor_data omap5430_mpu_temp_sensor_data = {
 	.t_cold = OMAP5430_MPU_T_COLD,
 	.min_freq = OMAP5430_MPU_MIN_FREQ,
 	.max_freq = OMAP5430_MPU_MAX_FREQ,
-	.max_temp = OMAP5430_MPU_MAX_TEMP,
-	.min_temp = OMAP5430_MPU_MIN_TEMP,
-	.hyst_val = OMAP5430_MPU_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /* Thresholds and limits for OMAP5430 GPU temperature sensor */
@@ -186,11 +153,6 @@ static struct temp_sensor_data omap5430_gpu_temp_sensor_data = {
 	.t_cold = OMAP5430_GPU_T_COLD,
 	.min_freq = OMAP5430_GPU_MIN_FREQ,
 	.max_freq = OMAP5430_GPU_MAX_FREQ,
-	.max_temp = OMAP5430_GPU_MAX_TEMP,
-	.min_temp = OMAP5430_GPU_MIN_TEMP,
-	.hyst_val = OMAP5430_GPU_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /* Thresholds and limits for OMAP5430 CORE temperature sensor */
@@ -201,11 +163,6 @@ static struct temp_sensor_data omap5430_core_temp_sensor_data = {
 	.t_cold = OMAP5430_CORE_T_COLD,
 	.min_freq = OMAP5430_CORE_MIN_FREQ,
 	.max_freq = OMAP5430_CORE_MAX_FREQ,
-	.max_temp = OMAP5430_CORE_MAX_TEMP,
-	.min_temp = OMAP5430_CORE_MIN_TEMP,
-	.hyst_val = OMAP5430_CORE_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /*
@@ -319,8 +276,7 @@ const struct ti_bandgap_data omap5430_data = {
 			TI_BANDGAP_FEATURE_FREEZE_BIT |
 			TI_BANDGAP_FEATURE_TALERT |
 			TI_BANDGAP_FEATURE_COUNTER_DELAY |
-			TI_BANDGAP_FEATURE_HISTORY_BUFFER |
-			TI_BANDGAP_FEATURE_ERRATA_813,
+			TI_BANDGAP_FEATURE_HISTORY_BUFFER,
 	.fclock_name = "l3instr_ts_gclk_div",
 	.div_ck_name = "l3instr_ts_gclk_div",
 	.conv_table = omap5430_adc_to_temp,

drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h

@@ -44,36 +44,24 @@
 #define OMAP5430_TEMP_SENSOR_GPU_OFFSET			0x150
 #define OMAP5430_BGAP_THRESHOLD_GPU_OFFSET		0x1A8
 #define OMAP5430_BGAP_TSHUT_GPU_OFFSET			0x1B4
-#define OMAP5430_BGAP_CUMUL_DTEMP_GPU_OFFSET		0x1C0
-#define OMAP5430_BGAP_DTEMP_GPU_0_OFFSET		0x1F4
 #define OMAP5430_BGAP_DTEMP_GPU_1_OFFSET		0x1F8
 #define OMAP5430_BGAP_DTEMP_GPU_2_OFFSET		0x1FC
-#define OMAP5430_BGAP_DTEMP_GPU_3_OFFSET		0x200
-#define OMAP5430_BGAP_DTEMP_GPU_4_OFFSET		0x204
 
 /* OMAP5430.MPU register offsets */
 #define OMAP5430_FUSE_OPP_BGAP_MPU			0x4
 #define OMAP5430_TEMP_SENSOR_MPU_OFFSET			0x14C
 #define OMAP5430_BGAP_THRESHOLD_MPU_OFFSET		0x1A4
 #define OMAP5430_BGAP_TSHUT_MPU_OFFSET			0x1B0
-#define OMAP5430_BGAP_CUMUL_DTEMP_MPU_OFFSET		0x1BC
-#define OMAP5430_BGAP_DTEMP_MPU_0_OFFSET		0x1E0
 #define OMAP5430_BGAP_DTEMP_MPU_1_OFFSET		0x1E4
 #define OMAP5430_BGAP_DTEMP_MPU_2_OFFSET		0x1E8
-#define OMAP5430_BGAP_DTEMP_MPU_3_OFFSET		0x1EC
-#define OMAP5430_BGAP_DTEMP_MPU_4_OFFSET		0x1F0
 
 /* OMAP5430.MPU register offsets */
 #define OMAP5430_FUSE_OPP_BGAP_CORE			0x8
 #define OMAP5430_TEMP_SENSOR_CORE_OFFSET		0x154
 #define OMAP5430_BGAP_THRESHOLD_CORE_OFFSET		0x1AC
 #define OMAP5430_BGAP_TSHUT_CORE_OFFSET			0x1B8
-#define OMAP5430_BGAP_CUMUL_DTEMP_CORE_OFFSET		0x1C4
-#define OMAP5430_BGAP_DTEMP_CORE_0_OFFSET		0x208
 #define OMAP5430_BGAP_DTEMP_CORE_1_OFFSET		0x20C
 #define OMAP5430_BGAP_DTEMP_CORE_2_OFFSET		0x210
-#define OMAP5430_BGAP_DTEMP_CORE_3_OFFSET		0x214
-#define OMAP5430_BGAP_DTEMP_CORE_4_OFFSET		0x218
 
 /* OMAP5430.common register offsets */
 #define OMAP5430_BGAP_CTRL_OFFSET			0x1A0
@@ -94,17 +82,10 @@
 #define OMAP5430_BGAP_TEMP_SENSOR_DTEMP_MASK		(0x3ff << 0)
 
 /* OMAP5430.BANDGAP_CTRL */
-#define OMAP5430_MASK_SIDLEMODE_MASK			(0x3 << 30)
 #define OMAP5430_MASK_COUNTER_DELAY_MASK		(0x7 << 27)
 #define OMAP5430_MASK_FREEZE_CORE_MASK			BIT(23)
 #define OMAP5430_MASK_FREEZE_GPU_MASK			BIT(22)
 #define OMAP5430_MASK_FREEZE_MPU_MASK			BIT(21)
-#define OMAP5430_MASK_CLEAR_CORE_MASK			BIT(20)
-#define OMAP5430_MASK_CLEAR_GPU_MASK			BIT(19)
-#define OMAP5430_MASK_CLEAR_MPU_MASK			BIT(18)
-#define OMAP5430_MASK_CLEAR_ACCUM_CORE_MASK		BIT(17)
-#define OMAP5430_MASK_CLEAR_ACCUM_GPU_MASK		BIT(16)
-#define OMAP5430_MASK_CLEAR_ACCUM_MPU_MASK		BIT(15)
 #define OMAP5430_MASK_HOT_CORE_MASK			BIT(5)
 #define OMAP5430_MASK_COLD_CORE_MASK			BIT(4)
 #define OMAP5430_MASK_HOT_GPU_MASK			BIT(3)
@@ -123,17 +104,7 @@
 #define OMAP5430_TSHUT_HOT_MASK				(0x3ff << 16)
 #define OMAP5430_TSHUT_COLD_MASK			(0x3ff << 0)
 
-/* OMAP5430.BANDGAP_CUMUL_DTEMP_MPU */
-#define OMAP5430_CUMUL_DTEMP_MPU_MASK			(0xffffffff << 0)
-
-/* OMAP5430.BANDGAP_CUMUL_DTEMP_GPU */
-#define OMAP5430_CUMUL_DTEMP_GPU_MASK			(0xffffffff << 0)
-
-/* OMAP5430.BANDGAP_CUMUL_DTEMP_CORE */
-#define OMAP5430_CUMUL_DTEMP_CORE_MASK			(0xffffffff << 0)
-
 /* OMAP5430.BANDGAP_STATUS */
-#define OMAP5430_BGAP_ALERT_MASK			BIT(31)
 #define OMAP5430_HOT_CORE_FLAG_MASK			BIT(5)
 #define OMAP5430_COLD_CORE_FLAG_MASK			BIT(4)
 #define OMAP5430_HOT_GPU_FLAG_MASK			BIT(3)
@@ -159,10 +130,6 @@
 /* bandgap clock limits */
 #define OMAP5430_GPU_MAX_FREQ				1500000
 #define OMAP5430_GPU_MIN_FREQ				1000000
-/* sensor limits */
-#define OMAP5430_GPU_MIN_TEMP				-40000
-#define OMAP5430_GPU_MAX_TEMP				125000
-#define OMAP5430_GPU_HYST_VAL				5000
 /* interrupts thresholds */
 #define OMAP5430_GPU_TSHUT_HOT				915
 #define OMAP5430_GPU_TSHUT_COLD				900
@@ -173,10 +140,6 @@
 /* bandgap clock limits */
 #define OMAP5430_MPU_MAX_FREQ				1500000
 #define OMAP5430_MPU_MIN_FREQ				1000000
-/* sensor limits */
-#define OMAP5430_MPU_MIN_TEMP				-40000
-#define OMAP5430_MPU_MAX_TEMP				125000
-#define OMAP5430_MPU_HYST_VAL				5000
 /* interrupts thresholds */
 #define OMAP5430_MPU_TSHUT_HOT				915
 #define OMAP5430_MPU_TSHUT_COLD				900
@@ -187,10 +150,6 @@
 /* bandgap clock limits */
 #define OMAP5430_CORE_MAX_FREQ				1500000
 #define OMAP5430_CORE_MIN_FREQ				1000000
-/* sensor limits */
-#define OMAP5430_CORE_MIN_TEMP				-40000
-#define OMAP5430_CORE_MAX_TEMP				125000
-#define OMAP5430_CORE_HYST_VAL				5000
 /* interrupts thresholds */
 #define OMAP5430_CORE_TSHUT_HOT				915
 #define OMAP5430_CORE_TSHUT_COLD			900

drivers/thermal/ti-soc-thermal/ti-bandgap.h

@@ -78,11 +78,8 @@
  * @bgap_mask_ctrl: BANDGAP_MASK_CTRL register offset
  * @mask_hot_mask: mask to bandgap_mask_ctrl.mask_hot
  * @mask_cold_mask: mask to bandgap_mask_ctrl.mask_cold
- * @mask_sidlemode_mask: mask to bandgap_mask_ctrl.mask_sidlemode
  * @mask_counter_delay_mask: mask to bandgap_mask_ctrl.mask_counter_delay
  * @mask_freeze_mask: mask to bandgap_mask_ctrl.mask_free
- * @mask_clear_mask: mask to bandgap_mask_ctrl.mask_clear
- * @mask_clear_accum_mask: mask to bandgap_mask_ctrl.mask_clear_accum
  * @bgap_mode_ctrl: BANDGAP_MODE_CTRL register offset
  * @mode_ctrl_mask: mask to bandgap_mode_ctrl.mode_ctrl
  * @bgap_counter: BANDGAP_COUNTER register offset
@@ -91,21 +88,13 @@
  * @threshold_thot_mask: mask to bandgap_threhold.thot
  * @threshold_tcold_mask: mask to bandgap_threhold.tcold
  * @tshut_threshold: TSHUT_THRESHOLD register offset (TSHUT thresholds)
- * @tshut_efuse_mask: mask to tshut_threshold.tshut_efuse
- * @tshut_efuse_shift: shift to tshut_threshold.tshut_efuse
  * @tshut_hot_mask: mask to tshut_threhold.thot
  * @tshut_cold_mask: mask to tshut_threhold.thot
  * @bgap_status: BANDGAP_STATUS register offset
- * @status_clean_stop_mask: mask to bandgap_status.clean_stop
- * @status_bgap_alert_mask: mask to bandgap_status.bandgap_alert
  * @status_hot_mask: mask to bandgap_status.hot
  * @status_cold_mask: mask to bandgap_status.cold
- * @bgap_cumul_dtemp: BANDGAP_CUMUL_DTEMP register offset
- * @ctrl_dtemp_0: CTRL_DTEMP0 register offset
  * @ctrl_dtemp_1: CTRL_DTEMP1 register offset
  * @ctrl_dtemp_2: CTRL_DTEMP2 register offset
- * @ctrl_dtemp_3: CTRL_DTEMP3 register offset
- * @ctrl_dtemp_4: CTRL_DTEMP4 register offset
  * @bgap_efuse: BANDGAP_EFUSE register offset
  *
  * The register offsets and bitfields might change across
@@ -121,17 +110,14 @@ struct temp_sensor_registers {
 	u32	temp_sensor_ctrl;
 	u32	bgap_tempsoff_mask;
 	u32	bgap_soc_mask;
-	u32	bgap_eocz_mask; /* not used: but needs revisit */
+	u32	bgap_eocz_mask;
 	u32	bgap_dtemp_mask;
 
 	u32	bgap_mask_ctrl;
 	u32	mask_hot_mask;
 	u32	mask_cold_mask;
-	u32	mask_sidlemode_mask; /* not used: but may be needed for pm */
 	u32	mask_counter_delay_mask;
 	u32	mask_freeze_mask;
-	u32	mask_clear_mask; /* not used: but needed for trending */
-	u32	mask_clear_accum_mask; /* not used: but needed for trending */
 
 	u32	bgap_mode_ctrl;
 	u32	mode_ctrl_mask;
@@ -144,23 +130,15 @@ struct temp_sensor_registers {
 	u32	threshold_tcold_mask;
 
 	u32	tshut_threshold;
-	u32	tshut_efuse_mask; /* not used */
-	u32	tshut_efuse_shift; /* not used */
 	u32	tshut_hot_mask;
 	u32	tshut_cold_mask;
 
 	u32	bgap_status;
-	u32	status_clean_stop_mask; /* not used: but needed for trending */
-	u32	status_bgap_alert_mask; /* not used */
 	u32	status_hot_mask;
 	u32	status_cold_mask;
 
-	u32	bgap_cumul_dtemp; /* not used: but needed for trending */
-	u32	ctrl_dtemp_0; /* not used: but needed for trending */
-	u32	ctrl_dtemp_1; /* not used: but needed for trending */
-	u32	ctrl_dtemp_2; /* not used: but needed for trending */
-	u32	ctrl_dtemp_3; /* not used: but needed for trending */
-	u32	ctrl_dtemp_4; /* not used: but needed for trending */
+	u32	ctrl_dtemp_1;
+	u32	ctrl_dtemp_2;
 	u32	bgap_efuse;
 };
 
@@ -172,11 +150,6 @@ struct temp_sensor_registers {
  * @t_cold: temperature to trigger a thermal alert (low initial value)
  * @min_freq: sensor minimum clock rate
  * @max_freq: sensor maximum clock rate
- * @max_temp: sensor maximum temperature
- * @min_temp: sensor minimum temperature
- * @hyst_val: temperature hysteresis considered while converting ADC values
- * @update_int1: update interval
- * @update_int2: update interval
  *
  * This data structure will hold the required thresholds and temperature limits
  * for a specific temperature sensor, like shutdown temperature, alert
@@ -189,11 +162,6 @@ struct temp_sensor_data {
 	u32	t_cold;
 	u32	min_freq;
 	u32	max_freq;
-	int     max_temp;
-	int     min_temp;
-	int     hyst_val;
-	u32     update_int1; /* not used */
-	u32     update_int2; /* not used */
 };
 
 struct ti_bandgap_data;
@@ -316,8 +284,6 @@ struct ti_temp_sensor {
  *
  * TI_BANDGAP_FEATURE_ERRATA_814 - used to workaorund when the bandgap device
  *	has Errata 814
- * TI_BANDGAP_FEATURE_ERRATA_813 - used to workaorund when the bandgap device
- *	has Errata 813
  * TI_BANDGAP_FEATURE_UNRELIABLE - used when the sensor readings are too
  *	inaccurate.
  * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a
@@ -334,8 +300,7 @@ struct ti_temp_sensor {
 #define TI_BANDGAP_FEATURE_COUNTER_DELAY	BIT(8)
 #define TI_BANDGAP_FEATURE_HISTORY_BUFFER	BIT(9)
 #define TI_BANDGAP_FEATURE_ERRATA_814		BIT(10)
-#define TI_BANDGAP_FEATURE_ERRATA_813		BIT(11)
-#define TI_BANDGAP_FEATURE_UNRELIABLE		BIT(12)
+#define TI_BANDGAP_FEATURE_UNRELIABLE		BIT(11)
 #define TI_BANDGAP_HAS(b, f)			\
 			((b)->conf->features & TI_BANDGAP_FEATURE_ ## f)