iio/axp288_adc: add missing channel info mask

Commit 65de7654 ("iio: iio: Fix iio_channel_read return if
channel havn't info") added a check for valid info masks.

This patch adds missing channel info masks for all ADC channels.
Otherwise, iio_read_channel_raw() would return -EINVAL when called
by consumer drivers.

Note that the change of _processed to _raw actually fixes an ABI abuse
in the original driver where it was used to avoid some special handling
rather than because it was correct.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/adc/axp288_adc.c

@@ -53,39 +53,42 @@ static const struct iio_chan_spec const axp288_adc_channels[] = {
 		.channel = 0,
 		.address = AXP288_TS_ADC_H,
 		.datasheet_name = "TS_PIN",
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	}, {
 		.indexed = 1,
 		.type = IIO_TEMP,
 		.channel = 1,
 		.address = AXP288_PMIC_ADC_H,
 		.datasheet_name = "PMIC_TEMP",
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	}, {
 		.indexed = 1,
 		.type = IIO_TEMP,
 		.channel = 2,
 		.address = AXP288_GP_ADC_H,
 		.datasheet_name = "GPADC",
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	}, {
 		.indexed = 1,
 		.type = IIO_CURRENT,
 		.channel = 3,
 		.address = AXP20X_BATT_CHRG_I_H,
 		.datasheet_name = "BATT_CHG_I",
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	}, {
 		.indexed = 1,
 		.type = IIO_CURRENT,
 		.channel = 4,
 		.address = AXP20X_BATT_DISCHRG_I_H,
 		.datasheet_name = "BATT_DISCHRG_I",
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	}, {
 		.indexed = 1,
 		.type = IIO_VOLTAGE,
 		.channel = 5,
 		.address = AXP20X_BATT_V_H,
 		.datasheet_name = "BATT_V",
-		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 	},
 };
 
@@ -151,9 +154,6 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev,
 						chan->address))
 			dev_err(&indio_dev->dev, "TS pin restore\n");
 		break;
-	case IIO_CHAN_INFO_PROCESSED:
-		ret = axp288_adc_read_channel(val, chan->address, info->regmap);
-		break;
 	default:
 		ret = -EINVAL;
 	}