Merge tag 'powerpc-4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

 - Fix an off-by-one bug in our alternative asm patching which leads to
   incorrectly patched code. This bug lay dormant for nearly 10 years
   but we finally hit it due to a recent change.

 - Fix lockups when running KVM guests on Power8 due to a missing check
   when a thread that's running KVM comes out of idle.

 - Fix an out-of-spec behaviour in the XIVE code (P9 interrupt
   controller).

 - Fix EEH handling of bridge MMIO windows.

 - Prevent crashes in our RFI fallback flush handler if firmware didn't
   tell us the size of the L1 cache (only seen on simulators).

Thanks to: Benjamin Herrenschmidt, Madhavan Srinivasan, Michael Neuling.

* tag 'powerpc-4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/kvm: Fix lockups when running KVM guests on Power8
  powerpc/eeh: Fix enabling bridge MMIO windows
  powerpc/xive: Fix trying to "push" an already active pool VP
  powerpc/64s: Default l1d_size to 64K in RFI fallback flush
  powerpc/lib: Fix off-by-one in alternate feature patching

arch/powerpc/kernel/eeh_pe.c

@@ -807,7 +807,8 @@ static void eeh_restore_bridge_bars(struct eeh_dev *edev)
 	eeh_ops->write_config(pdn, 15*4, 4, edev->config_space[15]);
 
 	/* PCI Command: 0x4 */
-	eeh_ops->write_config(pdn, PCI_COMMAND, 4, edev->config_space[1]);
+	eeh_ops->write_config(pdn, PCI_COMMAND, 4, edev->config_space[1] |
+			      PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
 
 	/* Check the PCIe link is ready */
 	eeh_bridge_check_link(edev);

arch/powerpc/kernel/idle_book3s.S

@@ -553,12 +553,12 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300)
 #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
 	lbz	r0,HSTATE_HWTHREAD_STATE(r13)
 	cmpwi	r0,KVM_HWTHREAD_IN_KERNEL
-	beq	1f
+	beq	0f
 	li	r0,KVM_HWTHREAD_IN_KERNEL
 	stb	r0,HSTATE_HWTHREAD_STATE(r13)
 	/* Order setting hwthread_state vs. testing hwthread_req */
 	sync
-	lbz	r0,HSTATE_HWTHREAD_REQ(r13)
+0:	lbz	r0,HSTATE_HWTHREAD_REQ(r13)
 	cmpwi	r0,0
 	beq	1f
 	b	kvm_start_guest

arch/powerpc/kernel/setup_64.c

@@ -890,6 +890,17 @@ static void __ref init_fallback_flush(void)
 		return;
 
 	l1d_size = ppc64_caches.l1d.size;
+
+	/*
+	 * If there is no d-cache-size property in the device tree, l1d_size
+	 * could be zero. That leads to the loop in the asm wrapping around to
+	 * 2^64-1, and then walking off the end of the fallback area and
+	 * eventually causing a page fault which is fatal. Just default to
+	 * something vaguely sane.
+	 */
+	if (!l1d_size)
+		l1d_size = (64 * 1024);
+
 	limit = min(ppc64_bolted_size(), ppc64_rma_size);
 
 	/*

arch/powerpc/lib/feature-fixups.c

@@ -55,7 +55,7 @@ static int patch_alt_instruction(unsigned int *src, unsigned int *dest,
 		unsigned int *target = (unsigned int *)branch_target(src);
 
 		/* Branch within the section doesn't need translating */
-		if (target < alt_start || target >= alt_end) {
+		if (target < alt_start || target > alt_end) {
 			instr = translate_branch(dest, src);
 			if (!instr)
 				return 1;

arch/powerpc/sysdev/xive/native.c

@@ -389,6 +389,10 @@ static void xive_native_setup_cpu(unsigned int cpu, struct xive_cpu *xc)
 	if (xive_pool_vps == XIVE_INVALID_VP)
 		return;
 
+	/* Check if pool VP already active, if it is, pull it */
+	if (in_be32(xive_tima + TM_QW2_HV_POOL + TM_WORD2) & TM_QW2W2_VP)
+		in_be64(xive_tima + TM_SPC_PULL_POOL_CTX);
+
 	/* Enable the pool VP */
 	vp = xive_pool_vps + cpu;
 	pr_debug("CPU %d setting up pool VP 0x%x\n", cpu, vp);